ARM: dts: imx27: Fix memory node duplication
[muen/linux.git] / arch / arm / boot / dts / imx27-pdk.dts
1 // SPDX-License-Identifier: GPL-2.0+
2 //
3 // Copyright 2012 Sascha Hauer, Pengutronix
4
5 /dts-v1/;
6 #include "imx27.dtsi"
7
8 / {
9         model = "Freescale i.MX27 Product Development Kit";
10         compatible = "fsl,imx27-pdk", "fsl,imx27";
11
12         memory@a0000000 {
13                 device_type = "memory";
14                 reg = <0xa0000000 0x08000000>;
15         };
16
17         usbphy {
18                 compatible = "simple-bus";
19                 #address-cells = <1>;
20                 #size-cells = <0>;
21
22                 usbphy0: usbphy@0 {
23                         compatible = "usb-nop-xceiv";
24                         reg = <0>;
25                         clocks = <&clks IMX27_CLK_DUMMY>;
26                         clock-names = "main_clk";
27                         #phy-cells = <0>;
28                 };
29         };
30 };
31
32 &cspi2 {
33         pinctrl-names = "default";
34         pinctrl-0 = <&pinctrl_cspi2>;
35         cs-gpios = <&gpio4 21 GPIO_ACTIVE_HIGH>;
36         status = "okay";
37
38         pmic: mc13783@0 {
39                 compatible = "fsl,mc13783";
40                 reg = <0>;
41                 spi-cs-high;
42                 spi-max-frequency = <1000000>;
43                 interrupt-parent = <&gpio3>;
44                 interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
45
46                 regulators {
47                         vgen_reg: vgen {
48                                 regulator-min-microvolt = <1500000>;
49                                 regulator-max-microvolt = <1500000>;
50                                 regulator-always-on;
51                                 regulator-boot-on;
52                         };
53
54                         vmmc1_reg: vmmc1 {
55                                 regulator-min-microvolt = <1600000>;
56                                 regulator-max-microvolt = <3000000>;
57                         };
58
59                         gpo1_reg: gpo1 {
60                                 regulator-always-on;
61                                 regulator-boot-on;
62                         };
63
64                         gpo3_reg: gpo3 {
65                                 regulator-always-on;
66                                 regulator-boot-on;
67                         };
68                 };
69         };
70 };
71
72 &fec {
73         phy-mode = "mii";
74         pinctrl-names = "default";
75         pinctrl-0 = <&pinctrl_fec>;
76         status = "okay";
77 };
78
79 &kpp {
80         linux,keymap = <
81                 MATRIX_KEY(0, 0, KEY_UP)
82                 MATRIX_KEY(0, 1, KEY_DOWN)
83                 MATRIX_KEY(1, 0, KEY_RIGHT)
84                 MATRIX_KEY(1, 1, KEY_LEFT)
85                 MATRIX_KEY(1, 2, KEY_ENTER)
86                 MATRIX_KEY(2, 0, KEY_F6)
87                 MATRIX_KEY(2, 1, KEY_F8)
88                 MATRIX_KEY(2, 2, KEY_F9)
89                 MATRIX_KEY(2, 3, KEY_F10)
90         >;
91         status = "okay";
92 };
93
94 &nfc {
95         pinctrl-names = "default";
96         pinctrl-0 = <&pinctrl_nand>;
97         nand-ecc-mode = "hw";
98         nand-on-flash-bbt;
99         status = "okay";
100 };
101
102 &uart1 {
103         uart-has-rtscts;
104         pinctrl-names = "default";
105         pinctrl-0 = <&pinctrl_uart1>;
106         status = "okay";
107 };
108
109 &usbotg {
110         pinctrl-names = "default";
111         pinctrl-0 = <&pinctrl_usbotg>;
112         dr_mode = "otg";
113         fsl,usbphy = <&usbphy0>;
114         phy_type = "ulpi";
115         status = "okay";
116 };
117
118 &iomuxc {
119         imx27-pdk {
120                 pinctrl_cspi2: cspi2grp {
121                         fsl,pins = <
122                                 MX27_PAD_CSPI2_MISO__CSPI2_MISO 0x0
123                                 MX27_PAD_CSPI2_MOSI__CSPI2_MOSI 0x0
124                                 MX27_PAD_CSPI2_SCLK__CSPI2_SCLK 0x0
125                                 MX27_PAD_CSPI2_SS0__GPIO4_21    0x0 /* SPI2 CS0 */
126                                 MX27_PAD_TOUT__GPIO3_14         0x0 /* PMIC IRQ */
127                         >;
128                 };
129
130                 pinctrl_fec: fecgrp {
131                         fsl,pins = <
132                                 MX27_PAD_SD3_CMD__FEC_TXD0 0x0
133                                 MX27_PAD_SD3_CLK__FEC_TXD1 0x0
134                                 MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
135                                 MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
136                                 MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
137                                 MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
138                                 MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
139                                 MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
140                                 MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
141                                 MX27_PAD_ATA_DATA7__FEC_MDC 0x0
142                                 MX27_PAD_ATA_DATA8__FEC_CRS 0x0
143                                 MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
144                                 MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
145                                 MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
146                                 MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
147                                 MX27_PAD_ATA_DATA13__FEC_COL 0x0
148                                 MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
149                                 MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
150                         >;
151                 };
152
153                 pinctrl_nand: nandgrp {
154                         fsl,pins = <
155                                 MX27_PAD_NFRB__NFRB     0x0
156                                 MX27_PAD_NFCLE__NFCLE   0x0
157                                 MX27_PAD_NFWP_B__NFWP_B 0x0
158                                 MX27_PAD_NFCE_B__NFCE_B 0x0
159                                 MX27_PAD_NFALE__NFALE   0x0
160                                 MX27_PAD_NFRE_B__NFRE_B 0x0
161                                 MX27_PAD_NFWE_B__NFWE_B 0x0
162                         >;
163                 };
164
165                 pinctrl_uart1: uart1grp {
166                         fsl,pins = <
167                                 MX27_PAD_UART1_TXD__UART1_TXD 0x0
168                                 MX27_PAD_UART1_RXD__UART1_RXD 0x0
169                                 MX27_PAD_UART1_CTS__UART1_CTS 0x0
170                                 MX27_PAD_UART1_RTS__UART1_RTS 0x0
171                         >;
172                 };
173
174                 pinctrl_usbotg: usbotggrp {
175                         fsl,pins = <
176                                 MX27_PAD_USBOTG_NXT__USBOTG_NXT 0x0
177                                 MX27_PAD_USBOTG_STP__USBOTG_STP 0x0
178                                 MX27_PAD_USBOTG_DIR__USBOTG_DIR 0x0
179                                 MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x0
180                                 MX27_PAD_USBOTG_DATA0__USBOTG_DATA0 0x0
181                                 MX27_PAD_USBOTG_DATA1__USBOTG_DATA1 0x0
182                                 MX27_PAD_USBOTG_DATA2__USBOTG_DATA2 0x0
183                                 MX27_PAD_USBOTG_DATA3__USBOTG_DATA3 0x0
184                                 MX27_PAD_USBOTG_DATA4__USBOTG_DATA4 0x0
185                                 MX27_PAD_USBOTG_DATA5__USBOTG_DATA5 0x0
186                                 MX27_PAD_USBOTG_DATA6__USBOTG_DATA6 0x0
187                                 MX27_PAD_USBOTG_DATA7__USBOTG_DATA7 0x0
188                         >;
189                 };
190         };
191 };