Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
[muen/linux.git] / arch / arm / boot / dts / omap4-droid4-xt894.dts
1 /*
2  * This program is free software; you can redistribute it and/or modify
3  * it under the terms of the GNU General Public License version 2 as
4  * published by the Free Software Foundation.
5  */
6 /dts-v1/;
7
8 #include <dt-bindings/input/input.h>
9 #include "omap443x.dtsi"
10 #include "motorola-cpcap-mapphone.dtsi"
11
12 / {
13         model = "Motorola Droid 4 XT894";
14         compatible = "motorola,droid4", "ti,omap4430", "ti,omap4";
15
16         chosen {
17                 stdout-path = &uart3;
18         };
19
20         aliases {
21                 display0 = &lcd0;
22                 display1 = &hdmi0;
23         };
24
25         /*
26          * We seem to have only 1021 MB accessible, 1021 - 1022 is locked,
27          * then 1023 - 1024 seems to contain mbm.
28          */
29         memory {
30                 device_type = "memory";
31                 reg = <0x80000000 0x3fd00000>;  /* 1021 MB */
32         };
33
34         /* Poweroff GPIO probably connected to CPCAP */
35         gpio-poweroff {
36                 compatible = "gpio-poweroff";
37                 pinctrl-0 = <&poweroff_gpio>;
38                 pinctrl-names = "default";
39                 gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;    /* gpio50 */
40         };
41
42         hdmi0: connector {
43                 compatible = "hdmi-connector";
44                 pinctrl-0 = <&hdmi_hpd_gpio>;
45                 pinctrl-names = "default";
46                 label = "hdmi";
47                 type = "d";
48
49                 hpd-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>;       /* gpio63 */
50
51                 port {
52                         hdmi_connector_in: endpoint {
53                                 remote-endpoint = <&hdmi_out>;
54                         };
55                 };
56         };
57
58         /*
59          * HDMI 5V regulator probably sourced from battery. Let's keep
60          * keep this as always enabled for HDMI to work until we've
61          * figured what the encoder chip is.
62          */
63         hdmi_regulator: regulator-hdmi {
64                 compatible = "regulator-fixed";
65                 regulator-name = "hdmi";
66                 regulator-min-microvolt = <5000000>;
67                 regulator-max-microvolt = <5000000>;
68                 gpio = <&gpio2 27 GPIO_ACTIVE_HIGH>;    /* gpio59 */
69                 enable-active-high;
70                 regulator-always-on;
71         };
72
73         /* FS USB Host PHY on port 1 for mdm6600 */
74         fsusb1_phy: usb-phy@1 {
75                 compatible = "motorola,mapphone-mdm6600";
76                 pinctrl-0 = <&usb_mdm6600_pins>;
77                 pinctrl-names = "default";
78                 enable-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;     /* gpio_95 */
79                 power-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;     /* gpio_54 */
80                 reset-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;     /* gpio_49 */
81                 /* mode: gpio_148 gpio_149 */
82                 motorola,mode-gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>,
83                                       <&gpio5 21 GPIO_ACTIVE_HIGH>;
84                 /* cmd: gpio_103 gpio_104 gpio_142 */
85                 motorola,cmd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>,
86                                      <&gpio4 8 GPIO_ACTIVE_HIGH>,
87                                      <&gpio5 14 GPIO_ACTIVE_HIGH>;
88                 /* status: gpio_52 gpio_53 gpio_55 */
89                 motorola,status-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>,
90                                         <&gpio2 21 GPIO_ACTIVE_HIGH>,
91                                         <&gpio2 23 GPIO_ACTIVE_HIGH>;
92                 #phy-cells = <0>;
93         };
94
95         /* HS USB host TLL nop-phy on port 2 for w3glte */
96         hsusb2_phy: usb-phy@2 {
97                 compatible = "usb-nop-xceiv";
98                 #phy-cells = <0>;
99         };
100
101         /* LCD regulator from sw5 source */
102         lcd_regulator: regulator-lcd {
103                 compatible = "regulator-fixed";
104                 regulator-name = "lcd";
105                 regulator-min-microvolt = <5050000>;
106                 regulator-max-microvolt = <5050000>;
107                 gpio = <&gpio4 0 GPIO_ACTIVE_HIGH>;     /* gpio96 */
108                 enable-active-high;
109                 vin-supply = <&sw5>;
110         };
111
112         /* This is probably coming straight from the battery.. */
113         wl12xx_vmmc: regulator-wl12xx {
114                 compatible = "regulator-fixed";
115                 regulator-name = "vwl1271";
116                 regulator-min-microvolt = <1650000>;
117                 regulator-max-microvolt = <1650000>;
118                 gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;    /* gpio94 */
119                 startup-delay-us = <70000>;
120                 enable-active-high;
121         };
122
123         gpio_keys {
124                 compatible = "gpio-keys";
125
126                 volume_down {
127                         label = "Volume Down";
128                         gpios = <&gpio5 26 GPIO_ACTIVE_LOW>; /* gpio154 */
129                         linux,code = <KEY_VOLUMEDOWN>;
130                         linux,can-disable;
131                         /* Value above 7.95ms for no GPIO hardware debounce */
132                         debounce-interval = <10>;
133                 };
134
135                 slider {
136                         label = "Keypad Slide";
137                         gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; /* gpio122 */
138                         linux,input-type = <EV_SW>;
139                         linux,code = <SW_KEYPAD_SLIDE>;
140                         linux,can-disable;
141                         /* Value above 7.95ms for no GPIO hardware debounce */
142                         debounce-interval = <10>;
143                 };
144         };
145
146         soundcard {
147                 compatible = "audio-graph-card";
148                 label = "Droid 4 Audio";
149
150                 simple-graph-card,widgets =
151                         "Speaker", "Earpiece",
152                         "Speaker", "Loudspeaker",
153                         "Headphone", "Headphone Jack",
154                         "Microphone", "Internal Mic";
155
156                 simple-graph-card,routing =
157                         "Earpiece", "EP",
158                         "Loudspeaker", "SPKR",
159                         "Headphone Jack", "HSL",
160                         "Headphone Jack", "HSR",
161                         "MICR", "Internal Mic";
162
163                 dais = <&mcbsp2_port>, <&mcbsp3_port>;
164         };
165
166         pwm8: dmtimer-pwm-8 {
167                 pinctrl-names = "default";
168                 pinctrl-0 = <&vibrator_direction_pin>;
169
170                 compatible = "ti,omap-dmtimer-pwm";
171                 #pwm-cells = <3>;
172                 ti,timers = <&timer8>;
173                 ti,clock-source = <0x01>;
174         };
175
176         pwm9: dmtimer-pwm-9 {
177                 pinctrl-names = "default";
178                 pinctrl-0 = <&vibrator_enable_pin>;
179
180                 compatible = "ti,omap-dmtimer-pwm";
181                 #pwm-cells = <3>;
182                 ti,timers = <&timer9>;
183                 ti,clock-source = <0x01>;
184         };
185
186         vibrator {
187                 compatible = "pwm-vibrator";
188                 pwms = <&pwm9 0 10000000 0>, <&pwm8 0 10000000 0>;
189                 pwm-names = "enable", "direction";
190                 direction-duty-cycle-ns = <10000000>;
191         };
192 };
193
194 &dss {
195         status = "okay";
196 };
197
198 &dsi1 {
199         status = "okay";
200         vdd-supply = <&vcsi>;
201
202         port {
203                 dsi1_out_ep: endpoint {
204                         remote-endpoint = <&lcd0_in>;
205                         lanes = <0 1 2 3 4 5>;
206                 };
207         };
208
209         lcd0: display {
210                 compatible = "panel-dsi-cm";
211                 label = "lcd0";
212                 vddi-supply = <&lcd_regulator>;
213                 reset-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;      /* gpio101 */
214
215                 width-mm = <50>;
216                 height-mm = <89>;
217                 backlight = <&lcd_backlight>;
218
219                 panel-timing {
220                         clock-frequency = <0>;          /* Calculated by dsi */
221
222                         hback-porch = <2>;
223                         hactive = <540>;
224                         hfront-porch = <0>;
225                         hsync-len = <2>;
226
227                         vback-porch = <1>;
228                         vactive = <960>;
229                         vfront-porch = <0>;
230                         vsync-len = <1>;
231
232                         hsync-active = <0>;
233                         vsync-active = <0>;
234                         de-active = <1>;
235                         pixelclk-active = <1>;
236                 };
237
238                 port {
239                         lcd0_in: endpoint {
240                                 remote-endpoint = <&dsi1_out_ep>;
241                         };
242                 };
243         };
244 };
245
246 &hdmi {
247         status = "okay";
248         pinctrl-0 = <&dss_hdmi_pins>;
249         pinctrl-names = "default";
250         vdda-supply = <&vdac>;
251
252         port {
253                 hdmi_out: endpoint {
254                         remote-endpoint = <&hdmi_connector_in>;
255                         lanes = <1 0 3 2 5 4 7 6>;
256                 };
257         };
258 };
259
260 &i2c1 {
261         tmp105@48 {
262                 compatible = "ti,tmp105";
263                 reg = <0x48>;
264                 pinctrl-0 = <&tmp105_irq>;
265                 pinctrl-names = "default";
266                 /* kpd_row0.gpio_178 */
267                 interrupts-extended = <&gpio6 18 IRQ_TYPE_EDGE_FALLING
268                                        &omap4_pmx_core 0x14e>;
269                 interrupt-names = "irq", "wakeup";
270                 wakeup-source;
271         };
272 };
273
274 &keypad {
275         keypad,num-rows = <8>;
276         keypad,num-columns = <8>;
277         linux,keymap = <
278
279         /* Row 1 */
280         MATRIX_KEY(0, 2, KEY_1)
281         MATRIX_KEY(0, 6, KEY_2)
282         MATRIX_KEY(2, 3, KEY_3)
283         MATRIX_KEY(0, 7, KEY_4)
284         MATRIX_KEY(0, 4, KEY_5)
285         MATRIX_KEY(5, 5, KEY_6)
286         MATRIX_KEY(0, 1, KEY_7)
287         MATRIX_KEY(0, 5, KEY_8)
288         MATRIX_KEY(0, 0, KEY_9)
289         MATRIX_KEY(1, 6, KEY_0)
290
291         /* Row 2 */
292         MATRIX_KEY(3, 4, KEY_APOSTROPHE)
293         MATRIX_KEY(7, 6, KEY_Q)
294         MATRIX_KEY(7, 7, KEY_W)
295         MATRIX_KEY(7, 2, KEY_E)
296         MATRIX_KEY(1, 0, KEY_R)
297         MATRIX_KEY(4, 4, KEY_T)
298         MATRIX_KEY(1, 2, KEY_Y)
299         MATRIX_KEY(6, 7, KEY_U)
300         MATRIX_KEY(2, 2, KEY_I)
301         MATRIX_KEY(5, 6, KEY_O)
302         MATRIX_KEY(3, 7, KEY_P)
303         MATRIX_KEY(6, 5, KEY_BACKSPACE)
304
305         /* Row 3 */
306         MATRIX_KEY(5, 4, KEY_TAB)
307         MATRIX_KEY(5, 7, KEY_A)
308         MATRIX_KEY(2, 7, KEY_S)
309         MATRIX_KEY(7, 0, KEY_D)
310         MATRIX_KEY(2, 6, KEY_F)
311         MATRIX_KEY(6, 2, KEY_G)
312         MATRIX_KEY(6, 6, KEY_H)
313         MATRIX_KEY(1, 4, KEY_J)
314         MATRIX_KEY(3, 1, KEY_K)
315         MATRIX_KEY(2, 1, KEY_L)
316         MATRIX_KEY(4, 6, KEY_ENTER)
317
318         /* Row 4 */
319         MATRIX_KEY(3, 6, KEY_LEFTSHIFT)         /* KEY_CAPSLOCK */
320         MATRIX_KEY(6, 1, KEY_Z)
321         MATRIX_KEY(7, 4, KEY_X)
322         MATRIX_KEY(5, 1, KEY_C)
323         MATRIX_KEY(1, 7, KEY_V)
324         MATRIX_KEY(2, 4, KEY_B)
325         MATRIX_KEY(4, 1, KEY_N)
326         MATRIX_KEY(1, 1, KEY_M)
327         MATRIX_KEY(3, 5, KEY_COMMA)
328         MATRIX_KEY(5, 2, KEY_DOT)
329         MATRIX_KEY(6, 3, KEY_UP)
330         MATRIX_KEY(7, 3, KEY_OK)
331
332         /* Row 5 */
333         MATRIX_KEY(2, 5, KEY_LEFTCTRL)          /* KEY_LEFTSHIFT */
334         MATRIX_KEY(4, 5, KEY_LEFTALT)           /* SYM */
335         MATRIX_KEY(6, 0, KEY_MINUS)
336         MATRIX_KEY(4, 7, KEY_EQUAL)
337         MATRIX_KEY(1, 5, KEY_SPACE)
338         MATRIX_KEY(3, 2, KEY_SLASH)
339         MATRIX_KEY(4, 3, KEY_LEFT)
340         MATRIX_KEY(5, 3, KEY_DOWN)
341         MATRIX_KEY(3, 3, KEY_RIGHT)
342
343         /* Side buttons, KEY_VOLUMEDOWN and KEY_PWER are on CPCAP? */
344         MATRIX_KEY(5, 0, KEY_VOLUMEUP)
345         >;
346 };
347
348 &mmc1 {
349         vmmc-supply = <&vwlan2>;
350         bus-width = <4>;
351         cd-gpios = <&gpio6 16 GPIO_ACTIVE_LOW>; /* gpio176 */
352 };
353
354 &mmc2 {
355         vmmc-supply = <&vsdio>;
356         bus-width = <8>;
357         non-removable;
358 };
359
360 &mmc3 {
361         vmmc-supply = <&wl12xx_vmmc>;
362         interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH
363                                &omap4_pmx_core 0xde>;
364
365         non-removable;
366         bus-width = <4>;
367         cap-power-off-card;
368
369         #address-cells = <1>;
370         #size-cells = <0>;
371         wlcore: wlcore@2 {
372                 compatible = "ti,wl1285", "ti,wl1283";
373                 reg = <2>;
374                 interrupt-parent = <&gpio4>;
375                 interrupts = <4 IRQ_TYPE_EDGE_RISING>; /* gpio100 */
376                 ref-clock-frequency = <26000000>;
377                 tcxo-clock-frequency = <26000000>;
378         };
379 };
380
381 &i2c1 {
382         lm3532@38 {
383                 compatible = "ti,lm3532";
384                 reg = <0x38>;
385
386                 enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
387
388                 lcd_backlight: backlight {
389                         compatible = "ti,lm3532-backlight";
390
391                         lcd {
392                                 led-sources = <0 1 2>;
393                                 ramp-up-msec = <1>;
394                                 ramp-down-msec = <0>;
395                         };
396                 };
397         };
398 };
399
400 &i2c2 {
401         touchscreen@4a {
402                 compatible = "atmel,maxtouch";
403                 reg = <0x4a>;
404                 pinctrl-names = "default";
405                 pinctrl-0 = <&touchscreen_pins>;
406
407                 reset-gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>; /* gpio173 */
408
409                 /* gpio_183 with sys_nirq2 pad as wakeup */
410                 interrupts-extended = <&gpio6 23 IRQ_TYPE_EDGE_FALLING>,
411                                       <&omap4_pmx_core 0x160>;
412                 interrupt-names = "irq", "wakeup";
413                 wakeup-source;
414         };
415
416         isl29030@44 {
417                 compatible = "isil,isl29030";
418                 reg = <0x44>;
419
420                 pinctrl-names = "default";
421                 pinctrl-0 = <&als_proximity_pins>;
422
423                 interrupt-parent = <&gpio6>;
424                 interrupts = <17 IRQ_TYPE_LEVEL_LOW>; /* gpio177 */
425         };
426 };
427
428 &omap4_pmx_core {
429
430         /* hdmi_hpd.gpio_63 */
431         hdmi_hpd_gpio: pinmux_hdmi_hpd_pins {
432                 pinctrl-single,pins = <
433                 OMAP4_IOPAD(0x098, PIN_INPUT | MUX_MODE3)
434                 >;
435         };
436
437         /* hdmi_cec.hdmi_cec, hdmi_scl.hdmi_scl, hdmi_sda.hdmi_sda */
438         dss_hdmi_pins: pinmux_dss_hdmi_pins {
439                 pinctrl-single,pins = <
440                 OMAP4_IOPAD(0x09a, PIN_INPUT | MUX_MODE0)
441                 OMAP4_IOPAD(0x09c, PIN_INPUT | MUX_MODE0)
442                 OMAP4_IOPAD(0x09e, PIN_INPUT | MUX_MODE0)
443                 >;
444         };
445
446         /* gpmc_ncs0.gpio_50 */
447         poweroff_gpio: pinmux_poweroff_pins {
448                 pinctrl-single,pins = <
449                 OMAP4_IOPAD(0x074, PIN_OUTPUT_PULLUP | MUX_MODE3)
450                 >;
451         };
452
453         /* kpd_row0.gpio_178 */
454         tmp105_irq: pinmux_tmp105_irq {
455                 pinctrl-single,pins = <
456                 OMAP4_IOPAD(0x18e, PIN_INPUT_PULLUP | MUX_MODE3)
457                 >;
458         };
459
460         usb_gpio_mux_sel1: pinmux_usb_gpio_mux_sel1_pins {
461                 /* gpio_60 */
462                 pinctrl-single,pins = <
463                 OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3)
464                 >;
465         };
466
467         touchscreen_pins: pinmux_touchscreen_pins {
468                 pinctrl-single,pins = <
469                 OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3)
470                 OMAP4_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE3)
471                 >;
472         };
473
474         als_proximity_pins: pinmux_als_proximity_pins {
475                 pinctrl-single,pins = <
476                 OMAP4_IOPAD(0x18c, PIN_INPUT_PULLUP | MUX_MODE3)
477                 >;
478         };
479
480         usb_mdm6600_pins: pinmux_usb_mdm6600_pins {
481                 pinctrl-single,pins = <
482                 /* enable 0x4a1000d8 usbb1_ulpitll_dat7.gpio_95 ag16 */
483                 OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3)
484
485                 /* power 0x4a10007c gpmc_nwp.gpio_54 c25 */
486                 OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3)
487
488                 /* reset 0x4a100072 gpmc_a25.gpio_49 d20 */
489                 OMAP4_IOPAD(0x072, PIN_OUTPUT | MUX_MODE3)
490
491                 /* mode0/bpwake 0x4a10014e sdmmc5_dat1.gpio_148 af4 */
492                 OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3)
493
494                 /* mode1/apwake 0x4a100150 sdmmc5_dat2.gpio_149 ag3 */
495                 OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3)
496
497                 /* status0 0x4a10007e gpmc_clk.gpio_55 b22 */
498                 OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3)
499
500                 /* status1 0x4a10007a gpmc_ncs3.gpio_53 c22 */
501                 OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)
502
503                 /* status2 0x4a100078 gpmc_ncs2.gpio_52 d21 */
504                 OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3)
505
506                 /* cmd0 0x4a100094 gpmc_ncs6.gpio_103 c24 */
507                 OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3)
508
509                 /* cmd1 0x4a100096 gpmc_ncs7.gpio_104 d24 */
510                 OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3)
511
512                 /* cmd2 0x4a100142 uart3_rts_sd.gpio_142 f28 */
513                 OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3)
514                 >;
515         };
516
517         usb_ulpi_pins: pinmux_usb_ulpi_pins {
518                 pinctrl-single,pins = <
519                 OMAP4_IOPAD(0x196, MUX_MODE7)
520                 OMAP4_IOPAD(0x198, MUX_MODE7)
521                 OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE0)
522                 OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE0)
523                 OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE0)
524                 OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE0)
525                 OMAP4_IOPAD(0x1ba, PIN_INPUT_PULLUP | MUX_MODE0)
526                 OMAP4_IOPAD(0x1bc, PIN_INPUT_PULLUP | MUX_MODE0)
527                 OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE0)
528                 OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE0)
529                 OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE0)
530                 OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE0)
531                 OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE0)
532                 OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE0)
533                 >;
534         };
535
536         /* usb0_otg_dp and usb0_otg_dm */
537         usb_utmi_pins: pinmux_usb_utmi_pins {
538                 pinctrl-single,pins = <
539                 OMAP4_IOPAD(0x196, PIN_INPUT | MUX_MODE0)
540                 OMAP4_IOPAD(0x198, PIN_INPUT | MUX_MODE0)
541                 OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE7)
542                 OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE7)
543                 OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE7)
544                 OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE7)
545                 OMAP4_IOPAD(0x1ba, PIN_INPUT_PULLUP | MUX_MODE7)
546                 OMAP4_IOPAD(0x1bc, PIN_INPUT_PULLUP | MUX_MODE7)
547                 OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE7)
548                 OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE7)
549                 OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE7)
550                 OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE7)
551                 OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE7)
552                 OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE7)
553                 >;
554         };
555
556         /*
557          * Note that the v3.0.8 stock userspace dynamically remuxes uart1
558          * rts pin probably for PM purposes to PIN_INPUT_PULLUP | MUX_MODE7
559          * when not used. If needed, we can add rts pin remux later based
560          * on power measurements.
561          */
562         uart1_pins: pinmux_uart1_pins {
563                 pinctrl-single,pins = <
564                 /* 0x4a10013c mcspi1_cs2.uart1_cts ag23 */
565                 OMAP4_IOPAD(0x13c, PIN_INPUT_PULLUP | MUX_MODE1)
566
567                 /* 0x4a10013e mcspi1_cs3.uart1_rts ah23 */
568                 OMAP4_IOPAD(0x13e, MUX_MODE1)
569
570                 /* 0x4a100140 uart3_cts_rctx.uart1_tx f27 */
571                 OMAP4_IOPAD(0x140, PIN_OUTPUT | MUX_MODE1)
572
573                 /* 0x4a1001ca dpm_emu14.uart1_rx aa3 */
574                 OMAP4_IOPAD(0x1ca, PIN_INPUT_PULLUP | MUX_MODE2)
575                 >;
576         };
577
578         /* uart3_tx_irtx and uart3_rx_irrx */
579         uart3_pins: pinmux_uart3_pins {
580                 pinctrl-single,pins = <
581                 OMAP4_IOPAD(0x196, MUX_MODE7)
582                 OMAP4_IOPAD(0x198, MUX_MODE7)
583                 OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE7)
584                 OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE7)
585                 OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE7)
586                 OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE7)
587                 OMAP4_IOPAD(0x1ba, MUX_MODE2)
588                 OMAP4_IOPAD(0x1bc, PIN_INPUT | MUX_MODE2)
589                 OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE7)
590                 OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE7)
591                 OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE7)
592                 OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE7)
593                 OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE7)
594                 OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE7)
595                 >;
596         };
597
598         uart4_pins: pinmux_uart4_pins {
599                 pinctrl-single,pins = <
600                 OMAP4_IOPAD(0x15c, PIN_INPUT | MUX_MODE0)               /* uart4_rx */
601                 OMAP4_IOPAD(0x15e, PIN_OUTPUT | MUX_MODE0)              /* uart4_tx */
602                 OMAP4_IOPAD(0x110, PIN_INPUT_PULLUP | MUX_MODE5)        /* uart4_cts */
603                 OMAP4_IOPAD(0x112, PIN_OUTPUT_PULLUP | MUX_MODE5)       /* uart4_rts */
604                 >;
605         };
606
607         mcbsp2_pins: pinmux_mcbsp2_pins {
608                 pinctrl-single,pins = <
609                 OMAP4_IOPAD(0x0f6, PIN_INPUT | MUX_MODE0)       /* abe_mcbsp2_clkx */
610                 OMAP4_IOPAD(0x0f8, PIN_INPUT | MUX_MODE0)       /* abe_mcbsp2_dr */
611                 OMAP4_IOPAD(0x0fa, PIN_OUTPUT | MUX_MODE0)      /* abe_mcbsp2_dx */
612                 OMAP4_IOPAD(0x0fc, PIN_INPUT | MUX_MODE0)       /* abe_mcbsp2_fsx */
613                 >;
614         };
615
616         mcbsp3_pins: pinmux_mcbsp3_pins {
617                 pinctrl-single,pins = <
618                 OMAP4_IOPAD(0x106, PIN_INPUT | MUX_MODE1)       /* abe_mcbsp3_dr */
619                 OMAP4_IOPAD(0x108, PIN_OUTPUT | MUX_MODE1)      /* abe_mcbsp3_dx */
620                 OMAP4_IOPAD(0x10a, PIN_INPUT | MUX_MODE1)       /* abe_mcbsp3_clkx */
621                 OMAP4_IOPAD(0x10c, PIN_INPUT | MUX_MODE1)       /* abe_mcbsp3_fsx */
622                 >;
623         };
624 };
625
626 &omap4_pmx_wkup {
627         usb_gpio_mux_sel2: pinmux_usb_gpio_mux_sel2_pins {
628                 /* gpio_wk0 */
629                 pinctrl-single,pins = <
630                 OMAP4_IOPAD(0x040, PIN_OUTPUT_PULLDOWN | MUX_MODE3)
631                 >;
632         };
633
634         vibrator_direction_pin: pinmux_vibrator_direction_pin {
635                 pinctrl-single,pins = <
636                 OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1)      /* dmtimer8_pwm_evt (gpio_27) */
637                 >;
638         };
639
640         vibrator_enable_pin: pinmux_vibrator_enable_pin {
641                 pinctrl-single,pins = <
642                 OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1)      /* dmtimer9_pwm_evt (gpio_28) */
643                 >;
644         };
645 };
646
647 /*
648  * As uart1 is wired to mdm6600 with rts and cts, we can use the cts pin for
649  * uart1 wakeirq.
650  */
651 &uart1 {
652         pinctrl-names = "default";
653         pinctrl-0 = <&uart1_pins>;
654         interrupts-extended = <&wakeupgen GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH
655                                &omap4_pmx_core 0xfc>;
656 };
657
658 &uart3 {
659         interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
660                                &omap4_pmx_core 0x17c>;
661 };
662
663 &uart4 {
664         pinctrl-names = "default";
665         pinctrl-0 = <&uart4_pins>;
666
667         bluetooth {
668                 compatible = "ti,wl1285-st";
669                 enable-gpios = <&gpio6 14 GPIO_ACTIVE_HIGH>; /* gpio 174 */
670                 max-speed = <3686400>;
671         };
672 };
673
674 &usbhsohci {
675         phys = <&fsusb1_phy>;
676         phy-names = "usb";
677 };
678
679 &usbhsehci {
680         phys = <&hsusb2_phy>;
681 };
682
683 &usbhshost {
684         port1-mode = "ohci-phy-4pin-dpdm";
685         port2-mode = "ehci-tll";
686 };
687
688 /* Internal UTMI+ PHY used for OTG, CPCAP ULPI PHY for detection and charger */
689 &usb_otg_hs {
690         interface-type = <1>;
691         mode = <3>;
692         power = <50>;
693 };
694
695 &i2c4 {
696         ak8975: magnetometer@c {
697                 compatible = "asahi-kasei,ak8975";
698                 reg = <0x0c>;
699
700                 vdd-supply = <&vhvio>;
701
702                 interrupt-parent = <&gpio6>;
703                 interrupts = <15 IRQ_TYPE_EDGE_RISING>; /* gpio175 */
704
705                 rotation-matrix = "-1", "0", "0",
706                                   "0", "1", "0",
707                                   "0", "0", "-1";
708
709         };
710
711         lis3dh: accelerometer@18 {
712                 compatible = "st,lis3dh-accel";
713                 reg = <0x18>;
714
715                 vdd-supply = <&vhvio>;
716
717                 interrupt-parent = <&gpio2>;
718                 interrupts = <2 IRQ_TYPE_EDGE_BOTH>; /* gpio34 */
719
720                 rotation-matrix = "0", "-1", "0",
721                                   "1", "0", "0",
722                                   "0", "0", "1";
723         };
724 };
725
726 &mcbsp2 {
727         #sound-dai-cells = <0>;
728         pinctrl-names = "default";
729         pinctrl-0 = <&mcbsp2_pins>;
730         status = "okay";
731
732         mcbsp2_port: port {
733                 cpu_dai2: endpoint {
734                         dai-format = "i2s";
735                         remote-endpoint = <&cpcap_audio_codec0>;
736                         frame-master = <&cpcap_audio_codec0>;
737                         bitclock-master = <&cpcap_audio_codec0>;
738                 };
739         };
740 };
741
742 &mcbsp3 {
743         #sound-dai-cells = <0>;
744         pinctrl-names = "default";
745         pinctrl-0 = <&mcbsp3_pins>;
746         status = "okay";
747
748         mcbsp3_port: port {
749                 cpu_dai3: endpoint {
750                         dai-format = "dsp_a";
751                         frame-master = <&cpcap_audio_codec1>;
752                         bitclock-master = <&cpcap_audio_codec1>;
753                         remote-endpoint = <&cpcap_audio_codec1>;
754                 };
755         };
756 };
757
758 &cpcap_audio_codec0 {
759         remote-endpoint = <&cpu_dai2>;
760 };
761
762 &cpcap_audio_codec1 {
763         remote-endpoint = <&cpu_dai3>;
764 };