Merge tag 'sunxi-dt-for-4.18' of https://git.kernel.org/pub/scm/linux/kernel/git...
[muen/linux.git] / arch / arm / boot / dts / sun8i-h3-libretech-all-h3-cc.dts
1 /*
2  * Copyright (C) 2017 Chen-Yu Tsai <wens@csie.org>
3  *
4  * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
5  */
6
7 /dts-v1/;
8 #include "sun8i-h3.dtsi"
9
10 #include <dt-bindings/gpio/gpio.h>
11 #include <dt-bindings/input/input.h>
12
13 / {
14         model = "Libre Computer Board ALL-H3-CC H3";
15         compatible = "libretech,all-h3-cc-h3", "allwinner,sun8i-h3";
16
17         aliases {
18                 ethernet0 = &emac;
19                 serial0 = &uart0;
20         };
21
22         chosen {
23                 stdout-path = "serial0:115200n8";
24         };
25
26         connector {
27                 compatible = "hdmi-connector";
28                 type = "a";
29
30                 port {
31                         hdmi_con_in: endpoint {
32                                 remote-endpoint = <&hdmi_out_con>;
33                         };
34                 };
35         };
36
37         leds {
38                 compatible = "gpio-leds";
39
40                 pwr_led {
41                         label = "librecomputer:green:pwr";
42                         gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
43                         default-state = "on";
44                 };
45
46                 status_led {
47                         label = "librecomputer:blue:status";
48                         gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */
49                 };
50         };
51
52         gpio_keys {
53                 compatible = "gpio-keys";
54
55                 power {
56                         label = "power";
57                         linux,code = <KEY_POWER>;
58                         gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */
59                 };
60         };
61
62         reg_vcc1v2: vcc1v2 {
63                 compatible = "regulator-fixed";
64                 regulator-name = "vcc1v2";
65                 regulator-min-microvolt = <3300000>;
66                 regulator-max-microvolt = <3300000>;
67                 regulator-always-on;
68                 regulator-boot-on;
69                 vin-supply = <&reg_vcc5v0>;
70                 gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
71                 enable-active-high;
72         };
73
74         reg_vcc3v3: vcc3v3 {
75                 compatible = "regulator-fixed";
76                 regulator-name = "vcc3v3";
77                 regulator-min-microvolt = <3300000>;
78                 regulator-max-microvolt = <3300000>;
79                 vin-supply = <&reg_vcc5v0>;
80         };
81
82         /* This represents the board's 5V input */
83         reg_vcc5v0: vcc5v0 {
84                 compatible = "regulator-fixed";
85                 regulator-name = "vcc5v0";
86                 regulator-min-microvolt = <5000000>;
87                 regulator-max-microvolt = <5000000>;
88         };
89
90         reg_vcc_dram: vcc-dram {
91                 compatible = "regulator-fixed";
92                 regulator-name = "vcc-dram";
93                 regulator-min-microvolt = <1500000>;
94                 regulator-max-microvolt = <1500000>;
95                 regulator-always-on;
96                 regulator-boot-on;
97                 vin-supply = <&reg_vcc5v0>;
98                 gpio = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
99                 enable-active-high;
100         };
101
102         reg_vcc_io: vcc-io {
103                 compatible = "regulator-fixed";
104                 regulator-name = "vcc-io";
105                 regulator-min-microvolt = <3300000>;
106                 regulator-max-microvolt = <3300000>;
107                 regulator-always-on;
108                 regulator-boot-on;
109                 vin-supply = <&reg_vcc3v3>;
110                 gpio = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */
111         };
112
113         reg_vdd_cpux: vdd-cpux {
114                 compatible = "regulator-fixed";
115                 regulator-name = "vdd-cpux";
116                 regulator-min-microvolt = <3300000>;
117                 regulator-max-microvolt = <3300000>;
118                 regulator-always-on;
119                 regulator-boot-on;
120                 vin-supply = <&reg_vcc5v0>;
121                 gpio = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
122                 enable-active-high;
123         };
124 };
125
126 &codec {
127         allwinner,audio-routing =
128                 "Line Out", "LINEOUT",
129                 "MIC1", "Mic",
130                 "Mic",  "MBIAS";
131         status = "okay";
132 };
133
134 &de {
135         status = "okay";
136 };
137
138 &ehci0 {
139         status = "okay";
140 };
141
142 &ehci1 {
143         status = "okay";
144 };
145
146 &ehci2 {
147         status = "okay";
148 };
149
150 &ehci3 {
151         status = "okay";
152 };
153
154 &emac {
155         phy-handle = <&int_mii_phy>;
156         phy-mode = "mii";
157         allwinner,leds-active-low;
158         status = "okay";
159 };
160
161 &hdmi {
162         status = "okay";
163 };
164
165 &hdmi_out {
166         hdmi_out_con: endpoint {
167                 remote-endpoint = <&hdmi_con_in>;
168         };
169 };
170
171 &ir {
172         pinctrl-names = "default";
173         pinctrl-0 = <&ir_pins_a>;
174         status = "okay";
175 };
176
177 &mmc0 {
178         vmmc-supply = <&reg_vcc_io>;
179         bus-width = <4>;
180         cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
181         status = "okay";
182 };
183
184 &ohci0 {
185         status = "okay";
186 };
187
188 &ohci1 {
189         status = "okay";
190 };
191
192 &ohci2 {
193         status = "okay";
194 };
195
196 &ohci3 {
197         status = "okay";
198 };
199
200 &uart0 {
201         pinctrl-names = "default";
202         pinctrl-0 = <&uart0_pins_a>;
203         status = "okay";
204 };
205
206 &usb_otg {
207         dr_mode = "host";
208         status = "okay";
209 };
210
211 &usbphy {
212         /* VBUS on USB ports are always on */
213         usb0_vbus-supply = <&reg_vcc5v0>;
214         usb1_vbus-supply = <&reg_vcc5v0>;
215         usb2_vbus-supply = <&reg_vcc5v0>;
216         usb3_vbus-supply = <&reg_vcc5v0>;
217         status = "okay";
218 };