2dceeea29b8351fa35358600d43aac4516fce8a2
[muen/linux.git] / arch / arm64 / boot / dts / rockchip / rk3399-puma-haikou.dts
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2 /*
3  * Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH
4  */
5
6 /dts-v1/;
7 #include "rk3399-puma.dtsi"
8
9 / {
10         model = "Theobroma Systems RK3399-Q7 SoM";
11         compatible = "tsd,rk3399-puma-haikou", "rockchip,rk3399";
12
13         chosen {
14                 stdout-path = "serial0:115200n8";
15         };
16
17         leds {
18                 pinctrl-0 = <&led_pin_module>, <&led_sd_haikou>;
19
20                 sd-card-led {
21                         label = "sd_card_led";
22                         gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
23                         linux,default-trigger = "mmc0";
24                 };
25         };
26
27         i2s0-sound {
28                 compatible = "simple-audio-card";
29                 simple-audio-card,format = "i2s";
30                 simple-audio-card,name = "Haikou,I2S-codec";
31                 simple-audio-card,mclk-fs = <512>;
32
33                 simple-audio-card,codec {
34                         clocks = <&sgtl5000_clk>;
35                         sound-dai = <&sgtl5000>;
36                 };
37
38                 simple-audio-card,cpu {
39                         bitclock-master;
40                         frame-master;
41                         sound-dai = <&i2s0>;
42                 };
43         };
44
45         sgtl5000_clk: sgtl5000-oscillator  {
46                         compatible = "fixed-clock";
47                         #clock-cells = <0>;
48                         clock-frequency  = <24576000>;
49         };
50
51         dc_12v: dc-12v {
52                 compatible = "regulator-fixed";
53                 regulator-name = "dc_12v";
54                 regulator-always-on;
55                 regulator-boot-on;
56                 regulator-min-microvolt = <12000000>;
57                 regulator-max-microvolt = <12000000>;
58         };
59
60         vcc3v3_baseboard: vcc3v3-baseboard {
61                 compatible = "regulator-fixed";
62                 regulator-name = "vcc3v3_baseboard";
63                 regulator-always-on;
64                 regulator-boot-on;
65                 regulator-min-microvolt = <3300000>;
66                 regulator-max-microvolt = <3300000>;
67                 vin-supply = <&dc_12v>;
68         };
69
70         vcc5v0_baseboard: vcc5v0-baseboard {
71                 compatible = "regulator-fixed";
72                 regulator-name = "vcc5v0_baseboard";
73                 regulator-always-on;
74                 regulator-boot-on;
75                 regulator-min-microvolt = <5000000>;
76                 regulator-max-microvolt = <5000000>;
77                 vin-supply = <&dc_12v>;
78         };
79
80         vcc5v0_otg: vcc5v0-otg-regulator {
81                 compatible = "regulator-fixed";
82                 enable-active-high;
83                 gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
84                 pinctrl-names = "default";
85                 pinctrl-0 = <&otg_vbus_drv>;
86                 regulator-name = "vcc5v0_otg";
87                 regulator-always-on;
88         };
89
90         vdda_codec: vdda-codec {
91                 compatible = "regulator-fixed";
92                 regulator-name = "vdda_codec";
93                 regulator-boot-on;
94                 regulator-min-microvolt = <3300000>;
95                 regulator-max-microvolt = <3300000>;
96                 vin-supply = <&vcc5v0_baseboard>;
97         };
98
99         vddd_codec: vddd-codec {
100                 compatible = "regulator-fixed";
101                 regulator-name = "vddd_codec";
102                 regulator-boot-on;
103                 regulator-min-microvolt = <1600000>;
104                 regulator-max-microvolt = <1600000>;
105                 vin-supply = <&vcc5v0_baseboard>;
106         };
107 };
108
109 &hdmi {
110         ddc-i2c-bus = <&i2c3>;
111         status = "okay";
112 };
113
114 &i2c1 {
115         status = "okay";
116         clock-frequency = <400000>;
117 };
118
119 &i2c2 {
120         status = "okay";
121         clock-frequency = <400000>;
122 };
123
124 &i2c3 {
125         i2c-scl-rising-time-ns = <450>;
126         i2c-scl-falling-time-ns = <15>;
127         status = "okay";
128 };
129
130 &i2c4 {
131         status = "okay";
132         clock-frequency = <400000>;
133
134         sgtl5000: codec@a {
135                 compatible = "fsl,sgtl5000";
136                 reg = <0x0a>;
137                 clocks = <&sgtl5000_clk>;
138                 #sound-dai-cells = <0>;
139                 VDDA-supply = <&vdda_codec>;
140                 VDDIO-supply = <&vdda_codec>;
141                 VDDD-supply = <&vddd_codec>;
142                 status = "okay";
143         };
144 };
145
146 &i2c6 {
147         status = "okay";
148         clock-frequency = <400000>;
149 };
150
151 &pcie_phy {
152         status = "okay";
153 };
154
155 &pcie0 {
156         ep-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_LOW>;
157         num-lanes = <4>;
158         pinctrl-names = "default";
159         pinctrl-0 = <&pcie_clkreqn_cpm>;
160         status = "okay";
161 };
162
163 &pinctrl {
164         pinctrl-names = "default";
165         pinctrl-0 = <&haikou_pin_hog>;
166
167         hog {
168                 haikou_pin_hog: haikou-pin-hog {
169                         rockchip,pins =
170                           /* LID_BTN */
171                           <RK_GPIO0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
172                           /* BATLOW# */
173                           <RK_GPIO0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
174                           /* SLP_BTN# */
175                           <RK_GPIO0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>,
176                           /* BIOS_DISABLE# */
177                           <RK_GPIO0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
178                 };
179         };
180
181         leds {
182                 led_sd_haikou: led-sd-gpio {
183                         rockchip,pins =
184                           <RK_GPIO1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
185                 };
186         };
187
188         usb2 {
189                 otg_vbus_drv: otg-vbus-drv {
190                         rockchip,pins =
191                           <RK_GPIO0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
192                 };
193         };
194 };
195
196 &pwm0 {
197         status = "okay";
198 };
199
200 &sdmmc {
201         bus-width = <4>;
202         cap-mmc-highspeed;
203         cap-sd-highspeed;
204         cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
205         disable-wp;
206         max-frequency = <150000000>;
207         pinctrl-names = "default";
208         pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
209         vmmc-supply = <&vcc3v3_baseboard>;
210         status = "okay";
211 };
212
213 &spi5 {
214         status = "okay";
215 };
216
217 &tcphy0 {
218         status = "okay";
219 };
220
221 &u2phy0 {
222         status = "okay";
223 };
224
225 &usbdrd3_0 {
226         status = "okay";
227 };
228
229 &usbdrd_dwc3_0 {
230         dr_mode = "otg";
231         status = "okay";
232 };
233
234 &u2phy0_host {
235         phy-supply = <&vcc5v0_otg>;
236         status = "okay";
237 };
238
239 &uart0 {
240         pinctrl-names = "default";
241         pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
242         status = "okay";
243 };
244
245 &uart2 {
246         status = "okay";
247 };
248
249 &usb_host0_ehci {
250         status = "okay";
251 };
252
253 &usb_host0_ohci {
254         status = "okay";
255 };
256
257 &vopb {
258         status = "okay";
259 };
260
261 &vopb_mmu {
262         status = "okay";
263 };
264
265 &vopl {
266         status = "okay";
267 };
268
269 &vopl_mmu {
270         status = "okay";
271 };