Merge tag 'acpi-extra-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git...
[muen/linux.git] / drivers / acpi / sleep.c
1 /*
2  * sleep.c - ACPI sleep support.
3  *
4  * Copyright (c) 2005 Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
5  * Copyright (c) 2004 David Shaohua Li <shaohua.li@intel.com>
6  * Copyright (c) 2000-2003 Patrick Mochel
7  * Copyright (c) 2003 Open Source Development Lab
8  *
9  * This file is released under the GPLv2.
10  *
11  */
12
13 #include <linux/delay.h>
14 #include <linux/irq.h>
15 #include <linux/dmi.h>
16 #include <linux/device.h>
17 #include <linux/interrupt.h>
18 #include <linux/suspend.h>
19 #include <linux/reboot.h>
20 #include <linux/acpi.h>
21 #include <linux/module.h>
22 #include <linux/syscore_ops.h>
23 #include <asm/io.h>
24 #include <trace/events/power.h>
25
26 #include "internal.h"
27 #include "sleep.h"
28
29 /*
30  * Some HW-full platforms do not have _S5, so they may need
31  * to leverage efi power off for a shutdown.
32  */
33 bool acpi_no_s5;
34 static u8 sleep_states[ACPI_S_STATE_COUNT];
35
36 static void acpi_sleep_tts_switch(u32 acpi_state)
37 {
38         acpi_status status;
39
40         status = acpi_execute_simple_method(NULL, "\\_TTS", acpi_state);
41         if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
42                 /*
43                  * OS can't evaluate the _TTS object correctly. Some warning
44                  * message will be printed. But it won't break anything.
45                  */
46                 printk(KERN_NOTICE "Failure in evaluating _TTS object\n");
47         }
48 }
49
50 static int tts_notify_reboot(struct notifier_block *this,
51                         unsigned long code, void *x)
52 {
53         acpi_sleep_tts_switch(ACPI_STATE_S5);
54         return NOTIFY_DONE;
55 }
56
57 static struct notifier_block tts_notifier = {
58         .notifier_call  = tts_notify_reboot,
59         .next           = NULL,
60         .priority       = 0,
61 };
62
63 static int acpi_sleep_prepare(u32 acpi_state)
64 {
65 #ifdef CONFIG_ACPI_SLEEP
66         /* do we have a wakeup address for S2 and S3? */
67         if (acpi_state == ACPI_STATE_S3) {
68                 if (!acpi_wakeup_address)
69                         return -EFAULT;
70                 acpi_set_waking_vector(acpi_wakeup_address);
71
72         }
73         ACPI_FLUSH_CPU_CACHE();
74 #endif
75         printk(KERN_INFO PREFIX "Preparing to enter system sleep state S%d\n",
76                 acpi_state);
77         acpi_enable_wakeup_devices(acpi_state);
78         acpi_enter_sleep_state_prep(acpi_state);
79         return 0;
80 }
81
82 static bool acpi_sleep_state_supported(u8 sleep_state)
83 {
84         acpi_status status;
85         u8 type_a, type_b;
86
87         status = acpi_get_sleep_type_data(sleep_state, &type_a, &type_b);
88         return ACPI_SUCCESS(status) && (!acpi_gbl_reduced_hardware
89                 || (acpi_gbl_FADT.sleep_control.address
90                         && acpi_gbl_FADT.sleep_status.address));
91 }
92
93 #ifdef CONFIG_ACPI_SLEEP
94 static u32 acpi_target_sleep_state = ACPI_STATE_S0;
95
96 u32 acpi_target_system_state(void)
97 {
98         return acpi_target_sleep_state;
99 }
100 EXPORT_SYMBOL_GPL(acpi_target_system_state);
101
102 static bool pwr_btn_event_pending;
103
104 /*
105  * The ACPI specification wants us to save NVS memory regions during hibernation
106  * and to restore them during the subsequent resume.  Windows does that also for
107  * suspend to RAM.  However, it is known that this mechanism does not work on
108  * all machines, so we allow the user to disable it with the help of the
109  * 'acpi_sleep=nonvs' kernel command line option.
110  */
111 static bool nvs_nosave;
112
113 void __init acpi_nvs_nosave(void)
114 {
115         nvs_nosave = true;
116 }
117
118 /*
119  * The ACPI specification wants us to save NVS memory regions during hibernation
120  * but says nothing about saving NVS during S3.  Not all versions of Windows
121  * save NVS on S3 suspend either, and it is clear that not all systems need
122  * NVS to be saved at S3 time.  To improve suspend/resume time, allow the
123  * user to disable saving NVS on S3 if their system does not require it, but
124  * continue to save/restore NVS for S4 as specified.
125  */
126 static bool nvs_nosave_s3;
127
128 void __init acpi_nvs_nosave_s3(void)
129 {
130         nvs_nosave_s3 = true;
131 }
132
133 static int __init init_nvs_save_s3(const struct dmi_system_id *d)
134 {
135         nvs_nosave_s3 = false;
136         return 0;
137 }
138
139 /*
140  * ACPI 1.0 wants us to execute _PTS before suspending devices, so we allow the
141  * user to request that behavior by using the 'acpi_old_suspend_ordering'
142  * kernel command line option that causes the following variable to be set.
143  */
144 static bool old_suspend_ordering;
145
146 void __init acpi_old_suspend_ordering(void)
147 {
148         old_suspend_ordering = true;
149 }
150
151 static int __init init_old_suspend_ordering(const struct dmi_system_id *d)
152 {
153         acpi_old_suspend_ordering();
154         return 0;
155 }
156
157 static int __init init_nvs_nosave(const struct dmi_system_id *d)
158 {
159         acpi_nvs_nosave();
160         return 0;
161 }
162
163 static struct dmi_system_id acpisleep_dmi_table[] __initdata = {
164         {
165         .callback = init_old_suspend_ordering,
166         .ident = "Abit KN9 (nForce4 variant)",
167         .matches = {
168                 DMI_MATCH(DMI_BOARD_VENDOR, "http://www.abit.com.tw/"),
169                 DMI_MATCH(DMI_BOARD_NAME, "KN9 Series(NF-CK804)"),
170                 },
171         },
172         {
173         .callback = init_old_suspend_ordering,
174         .ident = "HP xw4600 Workstation",
175         .matches = {
176                 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
177                 DMI_MATCH(DMI_PRODUCT_NAME, "HP xw4600 Workstation"),
178                 },
179         },
180         {
181         .callback = init_old_suspend_ordering,
182         .ident = "Asus Pundit P1-AH2 (M2N8L motherboard)",
183         .matches = {
184                 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTek Computer INC."),
185                 DMI_MATCH(DMI_BOARD_NAME, "M2N8L"),
186                 },
187         },
188         {
189         .callback = init_old_suspend_ordering,
190         .ident = "Panasonic CF51-2L",
191         .matches = {
192                 DMI_MATCH(DMI_BOARD_VENDOR,
193                                 "Matsushita Electric Industrial Co.,Ltd."),
194                 DMI_MATCH(DMI_BOARD_NAME, "CF51-2L"),
195                 },
196         },
197         {
198         .callback = init_nvs_nosave,
199         .ident = "Sony Vaio VGN-FW41E_H",
200         .matches = {
201                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
202                 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW41E_H"),
203                 },
204         },
205         {
206         .callback = init_nvs_nosave,
207         .ident = "Sony Vaio VGN-FW21E",
208         .matches = {
209                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
210                 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW21E"),
211                 },
212         },
213         {
214         .callback = init_nvs_nosave,
215         .ident = "Sony Vaio VGN-FW21M",
216         .matches = {
217                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
218                 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW21M"),
219                 },
220         },
221         {
222         .callback = init_nvs_nosave,
223         .ident = "Sony Vaio VPCEB17FX",
224         .matches = {
225                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
226                 DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB17FX"),
227                 },
228         },
229         {
230         .callback = init_nvs_nosave,
231         .ident = "Sony Vaio VGN-SR11M",
232         .matches = {
233                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
234                 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR11M"),
235                 },
236         },
237         {
238         .callback = init_nvs_nosave,
239         .ident = "Everex StepNote Series",
240         .matches = {
241                 DMI_MATCH(DMI_SYS_VENDOR, "Everex Systems, Inc."),
242                 DMI_MATCH(DMI_PRODUCT_NAME, "Everex StepNote Series"),
243                 },
244         },
245         {
246         .callback = init_nvs_nosave,
247         .ident = "Sony Vaio VPCEB1Z1E",
248         .matches = {
249                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
250                 DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB1Z1E"),
251                 },
252         },
253         {
254         .callback = init_nvs_nosave,
255         .ident = "Sony Vaio VGN-NW130D",
256         .matches = {
257                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
258                 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-NW130D"),
259                 },
260         },
261         {
262         .callback = init_nvs_nosave,
263         .ident = "Sony Vaio VPCCW29FX",
264         .matches = {
265                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
266                 DMI_MATCH(DMI_PRODUCT_NAME, "VPCCW29FX"),
267                 },
268         },
269         {
270         .callback = init_nvs_nosave,
271         .ident = "Averatec AV1020-ED2",
272         .matches = {
273                 DMI_MATCH(DMI_SYS_VENDOR, "AVERATEC"),
274                 DMI_MATCH(DMI_PRODUCT_NAME, "1000 Series"),
275                 },
276         },
277         {
278         .callback = init_old_suspend_ordering,
279         .ident = "Asus A8N-SLI DELUXE",
280         .matches = {
281                 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
282                 DMI_MATCH(DMI_BOARD_NAME, "A8N-SLI DELUXE"),
283                 },
284         },
285         {
286         .callback = init_old_suspend_ordering,
287         .ident = "Asus A8N-SLI Premium",
288         .matches = {
289                 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
290                 DMI_MATCH(DMI_BOARD_NAME, "A8N-SLI Premium"),
291                 },
292         },
293         {
294         .callback = init_nvs_nosave,
295         .ident = "Sony Vaio VGN-SR26GN_P",
296         .matches = {
297                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
298                 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR26GN_P"),
299                 },
300         },
301         {
302         .callback = init_nvs_nosave,
303         .ident = "Sony Vaio VPCEB1S1E",
304         .matches = {
305                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
306                 DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB1S1E"),
307                 },
308         },
309         {
310         .callback = init_nvs_nosave,
311         .ident = "Sony Vaio VGN-FW520F",
312         .matches = {
313                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
314                 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW520F"),
315                 },
316         },
317         {
318         .callback = init_nvs_nosave,
319         .ident = "Asus K54C",
320         .matches = {
321                 DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
322                 DMI_MATCH(DMI_PRODUCT_NAME, "K54C"),
323                 },
324         },
325         {
326         .callback = init_nvs_nosave,
327         .ident = "Asus K54HR",
328         .matches = {
329                 DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
330                 DMI_MATCH(DMI_PRODUCT_NAME, "K54HR"),
331                 },
332         },
333         /*
334          * https://bugzilla.kernel.org/show_bug.cgi?id=189431
335          * Lenovo G50-45 is a platform later than 2012, but needs nvs memory
336          * saving during S3.
337          */
338         {
339         .callback = init_nvs_save_s3,
340         .ident = "Lenovo G50-45",
341         .matches = {
342                 DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
343                 DMI_MATCH(DMI_PRODUCT_NAME, "80E3"),
344                 },
345         },
346         {},
347 };
348
349 static void __init acpi_sleep_dmi_check(void)
350 {
351         int year;
352
353         if (dmi_get_date(DMI_BIOS_DATE, &year, NULL, NULL) && year >= 2012)
354                 acpi_nvs_nosave_s3();
355
356         dmi_check_system(acpisleep_dmi_table);
357 }
358
359 /**
360  * acpi_pm_freeze - Disable the GPEs and suspend EC transactions.
361  */
362 static int acpi_pm_freeze(void)
363 {
364         acpi_disable_all_gpes();
365         acpi_os_wait_events_complete();
366         acpi_ec_block_transactions();
367         return 0;
368 }
369
370 /**
371  * acpi_pre_suspend - Enable wakeup devices, "freeze" EC and save NVS.
372  */
373 static int acpi_pm_pre_suspend(void)
374 {
375         acpi_pm_freeze();
376         return suspend_nvs_save();
377 }
378
379 /**
380  *      __acpi_pm_prepare - Prepare the platform to enter the target state.
381  *
382  *      If necessary, set the firmware waking vector and do arch-specific
383  *      nastiness to get the wakeup code to the waking vector.
384  */
385 static int __acpi_pm_prepare(void)
386 {
387         int error = acpi_sleep_prepare(acpi_target_sleep_state);
388         if (error)
389                 acpi_target_sleep_state = ACPI_STATE_S0;
390
391         return error;
392 }
393
394 /**
395  *      acpi_pm_prepare - Prepare the platform to enter the target sleep
396  *              state and disable the GPEs.
397  */
398 static int acpi_pm_prepare(void)
399 {
400         int error = __acpi_pm_prepare();
401         if (!error)
402                 error = acpi_pm_pre_suspend();
403
404         return error;
405 }
406
407 static int find_powerf_dev(struct device *dev, void *data)
408 {
409         struct acpi_device *device = to_acpi_device(dev);
410         const char *hid = acpi_device_hid(device);
411
412         return !strcmp(hid, ACPI_BUTTON_HID_POWERF);
413 }
414
415 /**
416  *      acpi_pm_finish - Instruct the platform to leave a sleep state.
417  *
418  *      This is called after we wake back up (or if entering the sleep state
419  *      failed).
420  */
421 static void acpi_pm_finish(void)
422 {
423         struct device *pwr_btn_dev;
424         u32 acpi_state = acpi_target_sleep_state;
425
426         acpi_ec_unblock_transactions();
427         suspend_nvs_free();
428
429         if (acpi_state == ACPI_STATE_S0)
430                 return;
431
432         printk(KERN_INFO PREFIX "Waking up from system sleep state S%d\n",
433                 acpi_state);
434         acpi_disable_wakeup_devices(acpi_state);
435         acpi_leave_sleep_state(acpi_state);
436
437         /* reset firmware waking vector */
438         acpi_set_waking_vector(0);
439
440         acpi_target_sleep_state = ACPI_STATE_S0;
441
442         acpi_resume_power_resources();
443
444         /* If we were woken with the fixed power button, provide a small
445          * hint to userspace in the form of a wakeup event on the fixed power
446          * button device (if it can be found).
447          *
448          * We delay the event generation til now, as the PM layer requires
449          * timekeeping to be running before we generate events. */
450         if (!pwr_btn_event_pending)
451                 return;
452
453         pwr_btn_event_pending = false;
454         pwr_btn_dev = bus_find_device(&acpi_bus_type, NULL, NULL,
455                                       find_powerf_dev);
456         if (pwr_btn_dev) {
457                 pm_wakeup_event(pwr_btn_dev, 0);
458                 put_device(pwr_btn_dev);
459         }
460 }
461
462 /**
463  * acpi_pm_start - Start system PM transition.
464  */
465 static void acpi_pm_start(u32 acpi_state)
466 {
467         acpi_target_sleep_state = acpi_state;
468         acpi_sleep_tts_switch(acpi_target_sleep_state);
469         acpi_scan_lock_acquire();
470 }
471
472 /**
473  * acpi_pm_end - Finish up system PM transition.
474  */
475 static void acpi_pm_end(void)
476 {
477         acpi_turn_off_unused_power_resources();
478         acpi_scan_lock_release();
479         /*
480          * This is necessary in case acpi_pm_finish() is not called during a
481          * failing transition to a sleep state.
482          */
483         acpi_target_sleep_state = ACPI_STATE_S0;
484         acpi_sleep_tts_switch(acpi_target_sleep_state);
485 }
486 #else /* !CONFIG_ACPI_SLEEP */
487 #define acpi_target_sleep_state ACPI_STATE_S0
488 static inline void acpi_sleep_dmi_check(void) {}
489 #endif /* CONFIG_ACPI_SLEEP */
490
491 #ifdef CONFIG_SUSPEND
492 static u32 acpi_suspend_states[] = {
493         [PM_SUSPEND_ON] = ACPI_STATE_S0,
494         [PM_SUSPEND_STANDBY] = ACPI_STATE_S1,
495         [PM_SUSPEND_MEM] = ACPI_STATE_S3,
496         [PM_SUSPEND_MAX] = ACPI_STATE_S5
497 };
498
499 /**
500  *      acpi_suspend_begin - Set the target system sleep state to the state
501  *              associated with given @pm_state, if supported.
502  */
503 static int acpi_suspend_begin(suspend_state_t pm_state)
504 {
505         u32 acpi_state = acpi_suspend_states[pm_state];
506         int error;
507
508         error = (nvs_nosave || nvs_nosave_s3) ? 0 : suspend_nvs_alloc();
509         if (error)
510                 return error;
511
512         if (!sleep_states[acpi_state]) {
513                 pr_err("ACPI does not support sleep state S%u\n", acpi_state);
514                 return -ENOSYS;
515         }
516         if (acpi_state > ACPI_STATE_S1)
517                 pm_set_suspend_via_firmware();
518
519         acpi_pm_start(acpi_state);
520         return 0;
521 }
522
523 /**
524  *      acpi_suspend_enter - Actually enter a sleep state.
525  *      @pm_state: ignored
526  *
527  *      Flush caches and go to sleep. For STR we have to call arch-specific
528  *      assembly, which in turn call acpi_enter_sleep_state().
529  *      It's unfortunate, but it works. Please fix if you're feeling frisky.
530  */
531 static int acpi_suspend_enter(suspend_state_t pm_state)
532 {
533         acpi_status status = AE_OK;
534         u32 acpi_state = acpi_target_sleep_state;
535         int error;
536
537         ACPI_FLUSH_CPU_CACHE();
538
539         trace_suspend_resume(TPS("acpi_suspend"), acpi_state, true);
540         switch (acpi_state) {
541         case ACPI_STATE_S1:
542                 barrier();
543                 status = acpi_enter_sleep_state(acpi_state);
544                 break;
545
546         case ACPI_STATE_S3:
547                 if (!acpi_suspend_lowlevel)
548                         return -ENOSYS;
549                 error = acpi_suspend_lowlevel();
550                 if (error)
551                         return error;
552                 pr_info(PREFIX "Low-level resume complete\n");
553                 pm_set_resume_via_firmware();
554                 break;
555         }
556         trace_suspend_resume(TPS("acpi_suspend"), acpi_state, false);
557
558         /* This violates the spec but is required for bug compatibility. */
559         acpi_write_bit_register(ACPI_BITREG_SCI_ENABLE, 1);
560
561         /* Reprogram control registers */
562         acpi_leave_sleep_state_prep(acpi_state);
563
564         /* ACPI 3.0 specs (P62) says that it's the responsibility
565          * of the OSPM to clear the status bit [ implying that the
566          * POWER_BUTTON event should not reach userspace ]
567          *
568          * However, we do generate a small hint for userspace in the form of
569          * a wakeup event. We flag this condition for now and generate the
570          * event later, as we're currently too early in resume to be able to
571          * generate wakeup events.
572          */
573         if (ACPI_SUCCESS(status) && (acpi_state == ACPI_STATE_S3)) {
574                 acpi_event_status pwr_btn_status = ACPI_EVENT_FLAG_DISABLED;
575
576                 acpi_get_event_status(ACPI_EVENT_POWER_BUTTON, &pwr_btn_status);
577
578                 if (pwr_btn_status & ACPI_EVENT_FLAG_STATUS_SET) {
579                         acpi_clear_event(ACPI_EVENT_POWER_BUTTON);
580                         /* Flag for later */
581                         pwr_btn_event_pending = true;
582                 }
583         }
584
585         /*
586          * Disable and clear GPE status before interrupt is enabled. Some GPEs
587          * (like wakeup GPE) haven't handler, this can avoid such GPE misfire.
588          * acpi_leave_sleep_state will reenable specific GPEs later
589          */
590         acpi_disable_all_gpes();
591         /* Allow EC transactions to happen. */
592         acpi_ec_unblock_transactions();
593
594         suspend_nvs_restore();
595
596         return ACPI_SUCCESS(status) ? 0 : -EFAULT;
597 }
598
599 static int acpi_suspend_state_valid(suspend_state_t pm_state)
600 {
601         u32 acpi_state;
602
603         switch (pm_state) {
604         case PM_SUSPEND_ON:
605         case PM_SUSPEND_STANDBY:
606         case PM_SUSPEND_MEM:
607                 acpi_state = acpi_suspend_states[pm_state];
608
609                 return sleep_states[acpi_state];
610         default:
611                 return 0;
612         }
613 }
614
615 static const struct platform_suspend_ops acpi_suspend_ops = {
616         .valid = acpi_suspend_state_valid,
617         .begin = acpi_suspend_begin,
618         .prepare_late = acpi_pm_prepare,
619         .enter = acpi_suspend_enter,
620         .wake = acpi_pm_finish,
621         .end = acpi_pm_end,
622 };
623
624 /**
625  *      acpi_suspend_begin_old - Set the target system sleep state to the
626  *              state associated with given @pm_state, if supported, and
627  *              execute the _PTS control method.  This function is used if the
628  *              pre-ACPI 2.0 suspend ordering has been requested.
629  */
630 static int acpi_suspend_begin_old(suspend_state_t pm_state)
631 {
632         int error = acpi_suspend_begin(pm_state);
633         if (!error)
634                 error = __acpi_pm_prepare();
635
636         return error;
637 }
638
639 /*
640  * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has
641  * been requested.
642  */
643 static const struct platform_suspend_ops acpi_suspend_ops_old = {
644         .valid = acpi_suspend_state_valid,
645         .begin = acpi_suspend_begin_old,
646         .prepare_late = acpi_pm_pre_suspend,
647         .enter = acpi_suspend_enter,
648         .wake = acpi_pm_finish,
649         .end = acpi_pm_end,
650         .recover = acpi_pm_finish,
651 };
652
653 static int acpi_freeze_begin(void)
654 {
655         acpi_scan_lock_acquire();
656         return 0;
657 }
658
659 static int acpi_freeze_prepare(void)
660 {
661         acpi_enable_wakeup_devices(ACPI_STATE_S0);
662         acpi_enable_all_wakeup_gpes();
663         acpi_os_wait_events_complete();
664         if (acpi_sci_irq_valid())
665                 enable_irq_wake(acpi_sci_irq);
666
667         return 0;
668 }
669
670 static void acpi_freeze_wake(void)
671 {
672         /*
673          * If IRQD_WAKEUP_ARMED is not set for the SCI at this point, it means
674          * that the SCI has triggered while suspended, so cancel the wakeup in
675          * case it has not been a wakeup event (the GPEs will be checked later).
676          */
677         if (acpi_sci_irq_valid() &&
678             !irqd_is_wakeup_armed(irq_get_irq_data(acpi_sci_irq)))
679                 pm_system_cancel_wakeup();
680 }
681
682 static void acpi_freeze_sync(void)
683 {
684         /*
685          * Process all pending events in case there are any wakeup ones.
686          *
687          * The EC driver uses the system workqueue, so that one needs to be
688          * flushed too.
689          */
690         acpi_os_wait_events_complete();
691         flush_scheduled_work();
692 }
693
694 static void acpi_freeze_restore(void)
695 {
696         acpi_disable_wakeup_devices(ACPI_STATE_S0);
697         if (acpi_sci_irq_valid())
698                 disable_irq_wake(acpi_sci_irq);
699
700         acpi_enable_all_runtime_gpes();
701 }
702
703 static void acpi_freeze_end(void)
704 {
705         acpi_scan_lock_release();
706 }
707
708 static const struct platform_freeze_ops acpi_freeze_ops = {
709         .begin = acpi_freeze_begin,
710         .prepare = acpi_freeze_prepare,
711         .wake = acpi_freeze_wake,
712         .sync = acpi_freeze_sync,
713         .restore = acpi_freeze_restore,
714         .end = acpi_freeze_end,
715 };
716
717 static void acpi_sleep_suspend_setup(void)
718 {
719         int i;
720
721         for (i = ACPI_STATE_S1; i < ACPI_STATE_S4; i++)
722                 if (acpi_sleep_state_supported(i))
723                         sleep_states[i] = 1;
724
725         suspend_set_ops(old_suspend_ordering ?
726                 &acpi_suspend_ops_old : &acpi_suspend_ops);
727         freeze_set_ops(&acpi_freeze_ops);
728 }
729
730 #else /* !CONFIG_SUSPEND */
731 static inline void acpi_sleep_suspend_setup(void) {}
732 #endif /* !CONFIG_SUSPEND */
733
734 #ifdef CONFIG_PM_SLEEP
735 static u32 saved_bm_rld;
736
737 static int  acpi_save_bm_rld(void)
738 {
739         acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_RLD, &saved_bm_rld);
740         return 0;
741 }
742
743 static void  acpi_restore_bm_rld(void)
744 {
745         u32 resumed_bm_rld = 0;
746
747         acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_RLD, &resumed_bm_rld);
748         if (resumed_bm_rld == saved_bm_rld)
749                 return;
750
751         acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_RLD, saved_bm_rld);
752 }
753
754 static struct syscore_ops acpi_sleep_syscore_ops = {
755         .suspend = acpi_save_bm_rld,
756         .resume = acpi_restore_bm_rld,
757 };
758
759 void acpi_sleep_syscore_init(void)
760 {
761         register_syscore_ops(&acpi_sleep_syscore_ops);
762 }
763 #else
764 static inline void acpi_sleep_syscore_init(void) {}
765 #endif /* CONFIG_PM_SLEEP */
766
767 #ifdef CONFIG_HIBERNATION
768 static unsigned long s4_hardware_signature;
769 static struct acpi_table_facs *facs;
770 static bool nosigcheck;
771
772 void __init acpi_no_s4_hw_signature(void)
773 {
774         nosigcheck = true;
775 }
776
777 static int acpi_hibernation_begin(void)
778 {
779         int error;
780
781         error = nvs_nosave ? 0 : suspend_nvs_alloc();
782         if (!error)
783                 acpi_pm_start(ACPI_STATE_S4);
784
785         return error;
786 }
787
788 static int acpi_hibernation_enter(void)
789 {
790         acpi_status status = AE_OK;
791
792         ACPI_FLUSH_CPU_CACHE();
793
794         /* This shouldn't return.  If it returns, we have a problem */
795         status = acpi_enter_sleep_state(ACPI_STATE_S4);
796         /* Reprogram control registers */
797         acpi_leave_sleep_state_prep(ACPI_STATE_S4);
798
799         return ACPI_SUCCESS(status) ? 0 : -EFAULT;
800 }
801
802 static void acpi_hibernation_leave(void)
803 {
804         pm_set_resume_via_firmware();
805         /*
806          * If ACPI is not enabled by the BIOS and the boot kernel, we need to
807          * enable it here.
808          */
809         acpi_enable();
810         /* Reprogram control registers */
811         acpi_leave_sleep_state_prep(ACPI_STATE_S4);
812         /* Check the hardware signature */
813         if (facs && s4_hardware_signature != facs->hardware_signature)
814                 pr_crit("ACPI: Hardware changed while hibernated, success doubtful!\n");
815         /* Restore the NVS memory area */
816         suspend_nvs_restore();
817         /* Allow EC transactions to happen. */
818         acpi_ec_unblock_transactions();
819 }
820
821 static void acpi_pm_thaw(void)
822 {
823         acpi_ec_unblock_transactions();
824         acpi_enable_all_runtime_gpes();
825 }
826
827 static const struct platform_hibernation_ops acpi_hibernation_ops = {
828         .begin = acpi_hibernation_begin,
829         .end = acpi_pm_end,
830         .pre_snapshot = acpi_pm_prepare,
831         .finish = acpi_pm_finish,
832         .prepare = acpi_pm_prepare,
833         .enter = acpi_hibernation_enter,
834         .leave = acpi_hibernation_leave,
835         .pre_restore = acpi_pm_freeze,
836         .restore_cleanup = acpi_pm_thaw,
837 };
838
839 /**
840  *      acpi_hibernation_begin_old - Set the target system sleep state to
841  *              ACPI_STATE_S4 and execute the _PTS control method.  This
842  *              function is used if the pre-ACPI 2.0 suspend ordering has been
843  *              requested.
844  */
845 static int acpi_hibernation_begin_old(void)
846 {
847         int error;
848         /*
849          * The _TTS object should always be evaluated before the _PTS object.
850          * When the old_suspended_ordering is true, the _PTS object is
851          * evaluated in the acpi_sleep_prepare.
852          */
853         acpi_sleep_tts_switch(ACPI_STATE_S4);
854
855         error = acpi_sleep_prepare(ACPI_STATE_S4);
856
857         if (!error) {
858                 if (!nvs_nosave)
859                         error = suspend_nvs_alloc();
860                 if (!error) {
861                         acpi_target_sleep_state = ACPI_STATE_S4;
862                         acpi_scan_lock_acquire();
863                 }
864         }
865         return error;
866 }
867
868 /*
869  * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has
870  * been requested.
871  */
872 static const struct platform_hibernation_ops acpi_hibernation_ops_old = {
873         .begin = acpi_hibernation_begin_old,
874         .end = acpi_pm_end,
875         .pre_snapshot = acpi_pm_pre_suspend,
876         .prepare = acpi_pm_freeze,
877         .finish = acpi_pm_finish,
878         .enter = acpi_hibernation_enter,
879         .leave = acpi_hibernation_leave,
880         .pre_restore = acpi_pm_freeze,
881         .restore_cleanup = acpi_pm_thaw,
882         .recover = acpi_pm_finish,
883 };
884
885 static void acpi_sleep_hibernate_setup(void)
886 {
887         if (!acpi_sleep_state_supported(ACPI_STATE_S4))
888                 return;
889
890         hibernation_set_ops(old_suspend_ordering ?
891                         &acpi_hibernation_ops_old : &acpi_hibernation_ops);
892         sleep_states[ACPI_STATE_S4] = 1;
893         if (nosigcheck)
894                 return;
895
896         acpi_get_table(ACPI_SIG_FACS, 1, (struct acpi_table_header **)&facs);
897         if (facs)
898                 s4_hardware_signature = facs->hardware_signature;
899 }
900 #else /* !CONFIG_HIBERNATION */
901 static inline void acpi_sleep_hibernate_setup(void) {}
902 #endif /* !CONFIG_HIBERNATION */
903
904 static void acpi_power_off_prepare(void)
905 {
906         /* Prepare to power off the system */
907         acpi_sleep_prepare(ACPI_STATE_S5);
908         acpi_disable_all_gpes();
909         acpi_os_wait_events_complete();
910 }
911
912 static void acpi_power_off(void)
913 {
914         /* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */
915         printk(KERN_DEBUG "%s called\n", __func__);
916         local_irq_disable();
917         acpi_enter_sleep_state(ACPI_STATE_S5);
918 }
919
920 int __init acpi_sleep_init(void)
921 {
922         char supported[ACPI_S_STATE_COUNT * 3 + 1];
923         char *pos = supported;
924         int i;
925
926         acpi_sleep_dmi_check();
927
928         sleep_states[ACPI_STATE_S0] = 1;
929
930         acpi_sleep_syscore_init();
931         acpi_sleep_suspend_setup();
932         acpi_sleep_hibernate_setup();
933
934         if (acpi_sleep_state_supported(ACPI_STATE_S5)) {
935                 sleep_states[ACPI_STATE_S5] = 1;
936                 pm_power_off_prepare = acpi_power_off_prepare;
937                 pm_power_off = acpi_power_off;
938         } else {
939                 acpi_no_s5 = true;
940         }
941
942         supported[0] = 0;
943         for (i = 0; i < ACPI_S_STATE_COUNT; i++) {
944                 if (sleep_states[i])
945                         pos += sprintf(pos, " S%d", i);
946         }
947         pr_info(PREFIX "(supports%s)\n", supported);
948
949         /*
950          * Register the tts_notifier to reboot notifier list so that the _TTS
951          * object can also be evaluated when the system enters S5.
952          */
953         register_reboot_notifier(&tts_notifier);
954         return 0;
955 }