ALSA: line6: Constify snd_ratden definitions
[muen/linux.git] / sound / usb / line6 / pod.c
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Line 6 Linux USB driver
4  *
5  * Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at)
6  */
7
8 #include <linux/slab.h>
9 #include <linux/wait.h>
10 #include <linux/interrupt.h>
11 #include <linux/module.h>
12 #include <linux/usb.h>
13
14 #include <sound/core.h>
15 #include <sound/control.h>
16
17 #include "capture.h"
18 #include "driver.h"
19 #include "playback.h"
20
21 /*
22         Locate name in binary program dump
23 */
24 #define POD_NAME_OFFSET 0
25 #define POD_NAME_LENGTH 16
26
27 /*
28         Other constants
29 */
30 #define POD_CONTROL_SIZE 0x80
31 #define POD_BUFSIZE_DUMPREQ 7
32 #define POD_STARTUP_DELAY 1000
33
34 /*
35         Stages of POD startup procedure
36 */
37 enum {
38         POD_STARTUP_VERSIONREQ,
39         POD_STARTUP_SETUP,
40         POD_STARTUP_DONE,
41 };
42
43 enum {
44         LINE6_BASSPODXT,
45         LINE6_BASSPODXTLIVE,
46         LINE6_BASSPODXTPRO,
47         LINE6_POCKETPOD,
48         LINE6_PODXT,
49         LINE6_PODXTLIVE_POD,
50         LINE6_PODXTPRO,
51 };
52
53 struct usb_line6_pod {
54         /* Generic Line 6 USB data */
55         struct usb_line6 line6;
56
57         /* Instrument monitor level */
58         int monitor_level;
59
60         /* Current progress in startup procedure */
61         int startup_progress;
62
63         /* Serial number of device */
64         u32 serial_number;
65
66         /* Firmware version (x 100) */
67         int firmware_version;
68
69         /* Device ID */
70         int device_id;
71 };
72
73 #define line6_to_pod(x)         container_of(x, struct usb_line6_pod, line6)
74
75 #define POD_SYSEX_CODE 3
76
77 /* *INDENT-OFF* */
78
79 enum {
80         POD_SYSEX_SAVE      = 0x24,
81         POD_SYSEX_SYSTEM    = 0x56,
82         POD_SYSEX_SYSTEMREQ = 0x57,
83         /* POD_SYSEX_UPDATE    = 0x6c, */  /* software update! */
84         POD_SYSEX_STORE     = 0x71,
85         POD_SYSEX_FINISH    = 0x72,
86         POD_SYSEX_DUMPMEM   = 0x73,
87         POD_SYSEX_DUMP      = 0x74,
88         POD_SYSEX_DUMPREQ   = 0x75
89
90         /* dumps entire internal memory of PODxt Pro */
91         /* POD_SYSEX_DUMPMEM2  = 0x76 */
92 };
93
94 enum {
95         POD_MONITOR_LEVEL  = 0x04,
96         POD_SYSTEM_INVALID = 0x10000
97 };
98
99 /* *INDENT-ON* */
100
101 enum {
102         POD_DUMP_MEMORY = 2
103 };
104
105 enum {
106         POD_BUSY_READ,
107         POD_BUSY_WRITE,
108         POD_CHANNEL_DIRTY,
109         POD_SAVE_PRESSED,
110         POD_BUSY_MIDISEND
111 };
112
113 static const struct snd_ratden pod_ratden = {
114         .num_min = 78125,
115         .num_max = 78125,
116         .num_step = 1,
117         .den = 2
118 };
119
120 static struct line6_pcm_properties pod_pcm_properties = {
121         .playback_hw = {
122                                   .info = (SNDRV_PCM_INFO_MMAP |
123                                            SNDRV_PCM_INFO_INTERLEAVED |
124                                            SNDRV_PCM_INFO_BLOCK_TRANSFER |
125                                            SNDRV_PCM_INFO_MMAP_VALID |
126                                            SNDRV_PCM_INFO_PAUSE |
127                                            SNDRV_PCM_INFO_SYNC_START),
128                                   .formats = SNDRV_PCM_FMTBIT_S24_3LE,
129                                   .rates = SNDRV_PCM_RATE_KNOT,
130                                   .rate_min = 39062,
131                                   .rate_max = 39063,
132                                   .channels_min = 2,
133                                   .channels_max = 2,
134                                   .buffer_bytes_max = 60000,
135                                   .period_bytes_min = 64,
136                                   .period_bytes_max = 8192,
137                                   .periods_min = 1,
138                                   .periods_max = 1024},
139         .capture_hw = {
140                                  .info = (SNDRV_PCM_INFO_MMAP |
141                                           SNDRV_PCM_INFO_INTERLEAVED |
142                                           SNDRV_PCM_INFO_BLOCK_TRANSFER |
143                                           SNDRV_PCM_INFO_MMAP_VALID |
144                                           SNDRV_PCM_INFO_SYNC_START),
145                                  .formats = SNDRV_PCM_FMTBIT_S24_3LE,
146                                  .rates = SNDRV_PCM_RATE_KNOT,
147                                  .rate_min = 39062,
148                                  .rate_max = 39063,
149                                  .channels_min = 2,
150                                  .channels_max = 2,
151                                  .buffer_bytes_max = 60000,
152                                  .period_bytes_min = 64,
153                                  .period_bytes_max = 8192,
154                                  .periods_min = 1,
155                                  .periods_max = 1024},
156         .rates = {
157                             .nrats = 1,
158                             .rats = &pod_ratden},
159         .bytes_per_channel = 3 /* SNDRV_PCM_FMTBIT_S24_3LE */
160 };
161
162 static const char pod_version_header[] = {
163         0xf2, 0x7e, 0x7f, 0x06, 0x02
164 };
165
166 static char *pod_alloc_sysex_buffer(struct usb_line6_pod *pod, int code,
167                                     int size)
168 {
169         return line6_alloc_sysex_buffer(&pod->line6, POD_SYSEX_CODE, code,
170                                         size);
171 }
172
173 /*
174         Process a completely received message.
175 */
176 static void line6_pod_process_message(struct usb_line6 *line6)
177 {
178         struct usb_line6_pod *pod = line6_to_pod(line6);
179         const unsigned char *buf = pod->line6.buffer_message;
180
181         if (memcmp(buf, pod_version_header, sizeof(pod_version_header)) == 0) {
182                 pod->firmware_version = buf[13] * 100 + buf[14] * 10 + buf[15];
183                 pod->device_id = ((int)buf[8] << 16) | ((int)buf[9] << 8) |
184                                  (int) buf[10];
185                 if (pod->startup_progress == POD_STARTUP_VERSIONREQ) {
186                         pod->startup_progress = POD_STARTUP_SETUP;
187                         schedule_delayed_work(&line6->startup_work, 0);
188                 }
189                 return;
190         }
191
192         /* Only look for sysex messages from this device */
193         if (buf[0] != (LINE6_SYSEX_BEGIN | LINE6_CHANNEL_DEVICE) &&
194             buf[0] != (LINE6_SYSEX_BEGIN | LINE6_CHANNEL_UNKNOWN)) {
195                 return;
196         }
197         if (memcmp(buf + 1, line6_midi_id, sizeof(line6_midi_id)) != 0)
198                 return;
199
200         if (buf[5] == POD_SYSEX_SYSTEM && buf[6] == POD_MONITOR_LEVEL) {
201                 short value = ((int)buf[7] << 12) | ((int)buf[8] << 8) |
202                               ((int)buf[9] << 4) | (int)buf[10];
203                 pod->monitor_level = value;
204         }
205 }
206
207 /*
208         Send system parameter (from integer).
209 */
210 static int pod_set_system_param_int(struct usb_line6_pod *pod, int value,
211                                     int code)
212 {
213         char *sysex;
214         static const int size = 5;
215
216         sysex = pod_alloc_sysex_buffer(pod, POD_SYSEX_SYSTEM, size);
217         if (!sysex)
218                 return -ENOMEM;
219         sysex[SYSEX_DATA_OFS] = code;
220         sysex[SYSEX_DATA_OFS + 1] = (value >> 12) & 0x0f;
221         sysex[SYSEX_DATA_OFS + 2] = (value >> 8) & 0x0f;
222         sysex[SYSEX_DATA_OFS + 3] = (value >> 4) & 0x0f;
223         sysex[SYSEX_DATA_OFS + 4] = (value) & 0x0f;
224         line6_send_sysex_message(&pod->line6, sysex, size);
225         kfree(sysex);
226         return 0;
227 }
228
229 /*
230         "read" request on "serial_number" special file.
231 */
232 static ssize_t serial_number_show(struct device *dev,
233                                   struct device_attribute *attr, char *buf)
234 {
235         struct snd_card *card = dev_to_snd_card(dev);
236         struct usb_line6_pod *pod = card->private_data;
237
238         return sprintf(buf, "%u\n", pod->serial_number);
239 }
240
241 /*
242         "read" request on "firmware_version" special file.
243 */
244 static ssize_t firmware_version_show(struct device *dev,
245                                      struct device_attribute *attr, char *buf)
246 {
247         struct snd_card *card = dev_to_snd_card(dev);
248         struct usb_line6_pod *pod = card->private_data;
249
250         return sprintf(buf, "%d.%02d\n", pod->firmware_version / 100,
251                        pod->firmware_version % 100);
252 }
253
254 /*
255         "read" request on "device_id" special file.
256 */
257 static ssize_t device_id_show(struct device *dev,
258                               struct device_attribute *attr, char *buf)
259 {
260         struct snd_card *card = dev_to_snd_card(dev);
261         struct usb_line6_pod *pod = card->private_data;
262
263         return sprintf(buf, "%d\n", pod->device_id);
264 }
265
266 /*
267         POD startup procedure.
268         This is a sequence of functions with special requirements (e.g., must
269         not run immediately after initialization, must not run in interrupt
270         context). After the last one has finished, the device is ready to use.
271 */
272
273 static void pod_startup(struct usb_line6 *line6)
274 {
275         struct usb_line6_pod *pod = line6_to_pod(line6);
276
277         switch (pod->startup_progress) {
278         case POD_STARTUP_VERSIONREQ:
279                 /* request firmware version: */
280                 line6_version_request_async(line6);
281                 break;
282         case POD_STARTUP_SETUP:
283                 /* serial number: */
284                 line6_read_serial_number(&pod->line6, &pod->serial_number);
285
286                 /* ALSA audio interface: */
287                 if (snd_card_register(line6->card))
288                         dev_err(line6->ifcdev, "Failed to register POD card.\n");
289                 pod->startup_progress = POD_STARTUP_DONE;
290                 break;
291         default:
292                 break;
293         }
294 }
295
296 /* POD special files: */
297 static DEVICE_ATTR_RO(device_id);
298 static DEVICE_ATTR_RO(firmware_version);
299 static DEVICE_ATTR_RO(serial_number);
300
301 static struct attribute *pod_dev_attrs[] = {
302         &dev_attr_device_id.attr,
303         &dev_attr_firmware_version.attr,
304         &dev_attr_serial_number.attr,
305         NULL
306 };
307
308 static const struct attribute_group pod_dev_attr_group = {
309         .name = "pod",
310         .attrs = pod_dev_attrs,
311 };
312
313 /* control info callback */
314 static int snd_pod_control_monitor_info(struct snd_kcontrol *kcontrol,
315                                         struct snd_ctl_elem_info *uinfo)
316 {
317         uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
318         uinfo->count = 1;
319         uinfo->value.integer.min = 0;
320         uinfo->value.integer.max = 65535;
321         return 0;
322 }
323
324 /* control get callback */
325 static int snd_pod_control_monitor_get(struct snd_kcontrol *kcontrol,
326                                        struct snd_ctl_elem_value *ucontrol)
327 {
328         struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol);
329         struct usb_line6_pod *pod = line6_to_pod(line6pcm->line6);
330
331         ucontrol->value.integer.value[0] = pod->monitor_level;
332         return 0;
333 }
334
335 /* control put callback */
336 static int snd_pod_control_monitor_put(struct snd_kcontrol *kcontrol,
337                                        struct snd_ctl_elem_value *ucontrol)
338 {
339         struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol);
340         struct usb_line6_pod *pod = line6_to_pod(line6pcm->line6);
341
342         if (ucontrol->value.integer.value[0] == pod->monitor_level)
343                 return 0;
344
345         pod->monitor_level = ucontrol->value.integer.value[0];
346         pod_set_system_param_int(pod, ucontrol->value.integer.value[0],
347                                  POD_MONITOR_LEVEL);
348         return 1;
349 }
350
351 /* control definition */
352 static const struct snd_kcontrol_new pod_control_monitor = {
353         .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
354         .name = "Monitor Playback Volume",
355         .index = 0,
356         .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
357         .info = snd_pod_control_monitor_info,
358         .get = snd_pod_control_monitor_get,
359         .put = snd_pod_control_monitor_put
360 };
361
362 /*
363          Try to init POD device.
364 */
365 static int pod_init(struct usb_line6 *line6,
366                     const struct usb_device_id *id)
367 {
368         int err;
369         struct usb_line6_pod *pod = line6_to_pod(line6);
370
371         line6->process_message = line6_pod_process_message;
372         line6->startup = pod_startup;
373
374         /* create sysfs entries: */
375         err = snd_card_add_dev_attr(line6->card, &pod_dev_attr_group);
376         if (err < 0)
377                 return err;
378
379         /* initialize MIDI subsystem: */
380         err = line6_init_midi(line6);
381         if (err < 0)
382                 return err;
383
384         /* initialize PCM subsystem: */
385         err = line6_init_pcm(line6, &pod_pcm_properties);
386         if (err < 0)
387                 return err;
388
389         /* register monitor control: */
390         err = snd_ctl_add(line6->card,
391                           snd_ctl_new1(&pod_control_monitor, line6->line6pcm));
392         if (err < 0)
393                 return err;
394
395         /*
396            When the sound card is registered at this point, the PODxt Live
397            displays "Invalid Code Error 07", so we do it later in the event
398            handler.
399          */
400
401         if (pod->line6.properties->capabilities & LINE6_CAP_CONTROL) {
402                 pod->monitor_level = POD_SYSTEM_INVALID;
403
404                 /* initiate startup procedure: */
405                 schedule_delayed_work(&line6->startup_work,
406                                       msecs_to_jiffies(POD_STARTUP_DELAY));
407         }
408
409         return 0;
410 }
411
412 #define LINE6_DEVICE(prod) USB_DEVICE(0x0e41, prod)
413 #define LINE6_IF_NUM(prod, n) USB_DEVICE_INTERFACE_NUMBER(0x0e41, prod, n)
414
415 /* table of devices that work with this driver */
416 static const struct usb_device_id pod_id_table[] = {
417         { LINE6_DEVICE(0x4250),    .driver_info = LINE6_BASSPODXT },
418         { LINE6_DEVICE(0x4642),    .driver_info = LINE6_BASSPODXTLIVE },
419         { LINE6_DEVICE(0x4252),    .driver_info = LINE6_BASSPODXTPRO },
420         { LINE6_IF_NUM(0x5051, 1), .driver_info = LINE6_POCKETPOD },
421         { LINE6_DEVICE(0x5044),    .driver_info = LINE6_PODXT },
422         { LINE6_IF_NUM(0x4650, 0), .driver_info = LINE6_PODXTLIVE_POD },
423         { LINE6_DEVICE(0x5050),    .driver_info = LINE6_PODXTPRO },
424         {}
425 };
426
427 MODULE_DEVICE_TABLE(usb, pod_id_table);
428
429 static const struct line6_properties pod_properties_table[] = {
430         [LINE6_BASSPODXT] = {
431                 .id = "BassPODxt",
432                 .name = "BassPODxt",
433                 .capabilities   = LINE6_CAP_CONTROL
434                                 | LINE6_CAP_CONTROL_MIDI
435                                 | LINE6_CAP_PCM
436                                 | LINE6_CAP_HWMON,
437                 .altsetting = 5,
438                 .ep_ctrl_r = 0x84,
439                 .ep_ctrl_w = 0x03,
440                 .ep_audio_r = 0x82,
441                 .ep_audio_w = 0x01,
442         },
443         [LINE6_BASSPODXTLIVE] = {
444                 .id = "BassPODxtLive",
445                 .name = "BassPODxt Live",
446                 .capabilities   = LINE6_CAP_CONTROL
447                                 | LINE6_CAP_CONTROL_MIDI
448                                 | LINE6_CAP_PCM
449                                 | LINE6_CAP_HWMON,
450                 .altsetting = 1,
451                 .ep_ctrl_r = 0x84,
452                 .ep_ctrl_w = 0x03,
453                 .ep_audio_r = 0x82,
454                 .ep_audio_w = 0x01,
455         },
456         [LINE6_BASSPODXTPRO] = {
457                 .id = "BassPODxtPro",
458                 .name = "BassPODxt Pro",
459                 .capabilities   = LINE6_CAP_CONTROL
460                                 | LINE6_CAP_CONTROL_MIDI
461                                 | LINE6_CAP_PCM
462                                 | LINE6_CAP_HWMON,
463                 .altsetting = 5,
464                 .ep_ctrl_r = 0x84,
465                 .ep_ctrl_w = 0x03,
466                 .ep_audio_r = 0x82,
467                 .ep_audio_w = 0x01,
468         },
469         [LINE6_POCKETPOD] = {
470                 .id = "PocketPOD",
471                 .name = "Pocket POD",
472                 .capabilities   = LINE6_CAP_CONTROL
473                                 | LINE6_CAP_CONTROL_MIDI,
474                 .altsetting = 0,
475                 .ep_ctrl_r = 0x82,
476                 .ep_ctrl_w = 0x02,
477                 /* no audio channel */
478         },
479         [LINE6_PODXT] = {
480                 .id = "PODxt",
481                 .name = "PODxt",
482                 .capabilities   = LINE6_CAP_CONTROL
483                                 | LINE6_CAP_CONTROL_MIDI
484                                 | LINE6_CAP_PCM
485                                 | LINE6_CAP_HWMON,
486                 .altsetting = 5,
487                 .ep_ctrl_r = 0x84,
488                 .ep_ctrl_w = 0x03,
489                 .ep_audio_r = 0x82,
490                 .ep_audio_w = 0x01,
491         },
492         [LINE6_PODXTLIVE_POD] = {
493                 .id = "PODxtLive",
494                 .name = "PODxt Live",
495                 .capabilities   = LINE6_CAP_CONTROL
496                                 | LINE6_CAP_CONTROL_MIDI
497                                 | LINE6_CAP_PCM
498                                 | LINE6_CAP_HWMON,
499                 .altsetting = 1,
500                 .ep_ctrl_r = 0x84,
501                 .ep_ctrl_w = 0x03,
502                 .ep_audio_r = 0x82,
503                 .ep_audio_w = 0x01,
504         },
505         [LINE6_PODXTPRO] = {
506                 .id = "PODxtPro",
507                 .name = "PODxt Pro",
508                 .capabilities   = LINE6_CAP_CONTROL
509                                 | LINE6_CAP_CONTROL_MIDI
510                                 | LINE6_CAP_PCM
511                                 | LINE6_CAP_HWMON,
512                 .altsetting = 5,
513                 .ep_ctrl_r = 0x84,
514                 .ep_ctrl_w = 0x03,
515                 .ep_audio_r = 0x82,
516                 .ep_audio_w = 0x01,
517         },
518 };
519
520 /*
521         Probe USB device.
522 */
523 static int pod_probe(struct usb_interface *interface,
524                      const struct usb_device_id *id)
525 {
526         return line6_probe(interface, id, "Line6-POD",
527                            &pod_properties_table[id->driver_info],
528                            pod_init, sizeof(struct usb_line6_pod));
529 }
530
531 static struct usb_driver pod_driver = {
532         .name = KBUILD_MODNAME,
533         .probe = pod_probe,
534         .disconnect = line6_disconnect,
535 #ifdef CONFIG_PM
536         .suspend = line6_suspend,
537         .resume = line6_resume,
538         .reset_resume = line6_resume,
539 #endif
540         .id_table = pod_id_table,
541 };
542
543 module_usb_driver(pod_driver);
544
545 MODULE_DESCRIPTION("Line 6 POD USB driver");
546 MODULE_LICENSE("GPL");