Jens writes:
"Block fixes for 4.19-rc6
A set of fixes that should go into this release. This pull request
contains:
- A fix (hopefully) for the persistent grants for xen-blkfront. A
previous fix from this series wasn't complete, hence reverted, and
this one should hopefully be it. (Boris Ostrovsky)
- Fix for an elevator drain warning with SMR devices, which is
triggered when you switch schedulers (Damien)
- bcache deadlock fix (Guoju Fang)
- Fix for the block unplug tracepoint, which has had the
timer/explicit flag reverted since 4.11 (Ilya)
- Fix a regression in this series where the blk-mq timeout hook is
invoked with the RCU read lock held, hence preventing it from
blocking (Keith)
- NVMe pull from Christoph, with a single multipath fix (Susobhan Dey)"
* tag 'for-linus-
20180929' of git://git.kernel.dk/linux-block:
xen/blkfront: correct purging of persistent grants
Revert "xen/blkfront: When purging persistent grants, keep them in the buffer"
blk-mq: I/O and timer unplugs are inverted in blktrace
bcache: add separate workqueue for journal_write to avoid deadlock
xen/blkfront: When purging persistent grants, keep them in the buffer
block: fix deadline elevator drain for zoned block devices
blk-mq: Allow blocking queue tag iter callbacks
nvme: properly propagate errors in nvme_mpath_init
Randy Dunlap <rdunlap@infradead.org> <rdunlap@xenotime.net>
Rémi Denis-Courmont <rdenis@simphalempin.com>
Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
+Ross Zwisler <zwisler@kernel.org> <ross.zwisler@linux.intel.com>
Rudolf Marek <R.Marek@sh.cvut.cz>
Rui Saraiva <rmps@joel.ist.utl.pt>
Sachin P Sant <ssant@in.ibm.com>
Contact: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Description:
Number of sectors written by the frontend.
+
+What: /sys/bus/xen-backend/devices/*/state
+Date: August 2018
+KernelVersion: 4.19
+Contact: Joe Jin <joe.jin@oracle.com>
+Description:
+ The state of the device. One of: 'Unknown',
+ 'Initialising', 'Initialised', 'Connected', 'Closing',
+ 'Closed', 'Reconfiguring', 'Reconfigured'.
Description:
Amount (in KiB) of low (or normal) memory in the
balloon.
+
+What: /sys/devices/system/xen_memory/xen_memory0/scrub_pages
+Date: September 2018
+KernelVersion: 4.20
+Contact: xen-devel@lists.xenproject.org
+Description:
+ Control scrubbing pages before returning them to Xen for others domains
+ use. Can be set with xen_scrub_pages cmdline
+ parameter. Default value controlled with CONFIG_XEN_SCRUB_PAGES_DEFAULT.
ramdisk_size= [RAM] Sizes of RAM disks in kilobytes
See Documentation/blockdev/ramdisk.txt.
+ random.trust_cpu={on,off}
+ [KNL] Enable or disable trusting the use of the
+ CPU's random number generator (if available) to
+ fully seed the kernel's CRNG. Default is controlled
+ by CONFIG_RANDOM_TRUST_CPU.
+
ras=option[,option,...] [KNL] RAS-specific options
cec_disable [X86]
Disables the PV optimizations forcing the HVM guest to
run as generic HVM guest with no PV drivers.
+ xen_scrub_pages= [XEN]
+ Boolean option to control scrubbing pages before giving them back
+ to Xen, for use by other domains. Can be also changed at runtime
+ with /sys/devices/system/xen_memory/xen_memory0/scrub_pages.
+ Default value controlled with CONFIG_XEN_SCRUB_PAGES_DEFAULT.
+
xirc2ps_cs= [NET,PCMCIA]
Format:
<irq>,<irq_mask>,<io>,<full_duplex>,<do_sound>,<lockup_hack>[,<irq2>[,<irq3>[,<irq4>]]]
thread.
* Changing the vector length causes all of P0..P15, FFR and all bits of
- Z0..V31 except for Z0 bits [127:0] .. Z31 bits [127:0] to become
+ Z0..Z31 except for Z0 bits [127:0] .. Z31 bits [127:0] to become
unspecified. Calling PR_SVE_SET_VL with vl equal to the thread's current
vector length, or calling PR_SVE_SET_VL with the PR_SVE_SET_VL_ONEXEC
flag, does not constitute a change to the vector length for this purpose.
[2] arch/arm64/include/uapi/asm/ptrace.h
AArch64 Linux ptrace ABI definitions
-[3] linux/Documentation/arm64/cpu-feature-registers.txt
+[3] Documentation/arm64/cpu-feature-registers.txt
[4] ARM IHI0055C
http://infocenter.arm.com/help/topic/com.arm.doc.ihi0055c/IHI0055C_beta_aapcs64.pdf
1.13.1 Fix deadlock caused by early md_stop_writes(). Also fix size an
state races.
1.13.2 Fix raid redundancy validation and avoid keeping raid set frozen
+1.14.0 Fix reshape race on small devices. Fix stripe adding reshape
+ deadlock/potential data corruption. Update superblock when
+ specific devices are requested via rebuild. Fix RAID leg
+ rebuild errors.
};
idle-states {
- entry-method = "arm,psci";
+ entry-method = "psci";
CPU_SLEEP_0: cpu-sleep-0 {
compatible = "arm,idle-state";
Value type: <stringlist>
Usage and definition depend on ARM architecture version.
# On ARM v8 64-bit this property is required and must
- be one of:
- - "psci" (see bindings in [2])
+ be:
+ - "psci"
# On ARM 32-bit systems this property is optional
The nodes describing the idle states (state) can only be defined within the
Required properties:
- compatible :
- "fsl,imx7ulp-lpi2c" for LPI2C compatible with the one integrated on i.MX7ULP soc
- - "fsl,imx8dv-lpi2c" for LPI2C compatible with the one integrated on i.MX8DV soc
- reg : address and length of the lpi2c master registers
- interrupts : lpi2c interrupt
- clocks : lpi2c clock specifier
Examples:
lpi2c7: lpi2c7@40a50000 {
- compatible = "fsl,imx8dv-lpi2c";
+ compatible = "fsl,imx7ulp-lpi2c";
reg = <0x40A50000 0x10000>;
interrupt-parent = <&intc>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
-Device-Tree bindings for input/gpio_keys.c keyboard driver
+Device-Tree bindings for input/keyboard/gpio_keys.c keyboard driver
Required properties:
- compatible = "gpio-keys";
- "renesas,irqc-r8a7792" (R-Car V2H)
- "renesas,irqc-r8a7793" (R-Car M2-N)
- "renesas,irqc-r8a7794" (R-Car E2)
+ - "renesas,intc-ex-r8a774a1" (RZ/G2M)
- "renesas,intc-ex-r8a7795" (R-Car H3)
- "renesas,intc-ex-r8a7796" (R-Car M3-W)
- "renesas,intc-ex-r8a77965" (R-Car M3-N)
attached to every HLIC: software interrupts, the timer interrupt, and external
interrupts. Software interrupts are used to send IPIs between cores. The
timer interrupt comes from an architecturally mandated real-time timer that is
-controller via Supervisor Binary Interface (SBI) calls and CSR reads. External
+controlled via Supervisor Binary Interface (SBI) calls and CSR reads. External
interrupts connect all other device interrupts to the HLIC, which are routed
via the platform-level interrupt controller (PLIC).
Required properties:
- compatible : "riscv,cpu-intc"
-- #interrupt-cells : should be <1>
+- #interrupt-cells : should be <1>. The interrupt sources are defined by the
+ RISC-V supervisor ISA manual, with only the following three interrupts being
+ defined for supervisor mode:
+ - Source 1 is the supervisor software interrupt, which can be sent by an SBI
+ call and is reserved for use by software.
+ - Source 5 is the supervisor timer interrupt, which can be configured by
+ SBI calls and implements a one-shot timer.
+ - Source 9 is the supervisor external interrupt, which chains to all other
+ device interrupts.
- interrupt-controller : Identifies the node as an interrupt controller
Furthermore, this interrupt-controller MUST be embedded inside the cpu
...
cpu1-intc: interrupt-controller {
#interrupt-cells = <1>;
- compatible = "riscv,cpu-intc", "sifive,fu540-c000-cpu-intc";
+ compatible = "sifive,fu540-c000-cpu-intc", "riscv,cpu-intc";
interrupt-contr
git.codelabs.ch / muen / linux.git / commitdiff