What: /sys/class/ata_...
-Date: August 2008
-Contact: Gwendal Grignou<gwendal@google.com>
Description:
-
-Provide a place in sysfs for storing the ATA topology of the system. This allows
-retrieving various information about ATA objects.
+ Provide a place in sysfs for storing the ATA topology of the
+ system. This allows retrieving various information about ATA
+ objects.
Files under /sys/class/ata_port
-------------------------------
- For each port, a directory ataX is created where X is the ata_port_id of
- the port. The device parent is the ata host device.
+For each port, a directory ataX is created where X is the ata_port_id of the
+port. The device parent is the ata host device.
-idle_irq (read)
- Number of IRQ received by the port while idle [some ata HBA only].
+What: /sys/class/ata_port/ataX/nr_pmp_links
+What: /sys/class/ata_port/ataX/idle_irq
+Date: May, 2010
+KernelVersion: v2.6.37
+Contact: Gwendal Grignou <gwendal@chromium.org>
+Description:
+ nr_pmp_links: (RO) If a SATA Port Multiplier (PM) is
+ connected, the number of links behind it.
-nr_pmp_links (read)
+ idle_irq: (RO) Number of IRQ received by the port while
+ idle [some ata HBA only].
- If a SATA Port Multiplier (PM) is connected, number of link behind it.
+
+What: /sys/class/ata_port/ataX/port_no
+Date: May, 2013
+KernelVersion: v3.11
+Contact: Gwendal Grignou <gwendal@chromium.org>
+Description:
+ (RO) Host local port number. While registering host controller,
+ port numbers are tracked based upon number of ports available on
+ the controller. This attribute is needed by udev for composing
+ persistent links in /dev/disk/by-path.
Files under /sys/class/ata_link
-------------------------------
- Behind each port, there is a ata_link. If there is a SATA PM in the
- topology, 15 ata_link objects are created.
-
- If a link is behind a port, the directory name is linkX, where X is
- ata_port_id of the port.
- If a link is behind a PM, its name is linkX.Y where X is ata_port_id
- of the parent port and Y the PM port.
+Behind each port, there is a ata_link. If there is a SATA PM in the topology, 15
+ata_link objects are created.
-hw_sata_spd_limit
+If a link is behind a port, the directory name is linkX, where X is ata_port_id
+of the port. If a link is behind a PM, its name is linkX.Y where X is
+ata_port_id of the parent port and Y the PM port.
- Maximum speed supported by the connected SATA device.
-sata_spd_limit
+What: /sys/class/ata_link/linkX[.Y]/hw_sata_spd_limit
+What: /sys/class/ata_link/linkX[.Y]/sata_spd_limit
+What: /sys/class/ata_link/linkX[.Y]/sata_spd
+Date: May, 2010
+KernelVersion: v2.6.37
+Contact: Gwendal Grignou <gwendal@chromium.org>
+Description:
+ hw_sata_spd_limit: (RO) Maximum speed supported by the
+ connected SATA device.
- Maximum speed imposed by libata.
+ sata_spd_limit: (RO) Maximum speed imposed by libata.
-sata_spd
+ sata_spd: (RO) Current speed of the link
+ eg. 1.5, 3 Gbps etc.
- Current speed of the link [1.5, 3Gps,...].
Files under /sys/class/ata_device
---------------------------------
- Behind each link, up to two ata device are created.
- The name of the directory is devX[.Y].Z where:
- - X is ata_port_id of the port where the device is connected,
- - Y the port of the PM if any, and
- - Z the device id: for PATA, there is usually 2 devices [0,1],
- only 1 for SATA.
-
-class
- Device class. Can be "ata" for disk, "atapi" for packet device,
- "pmp" for PM, or "none" if no device was found behind the link.
-
-dma_mode
+Behind each link, up to two ata devices are created.
+The name of the directory is devX[.Y].Z where:
+- X is ata_port_id of the port where the device is connected,
+- Y the port of the PM if any, and
+- Z the device id: for PATA, there is usually 2 devices [0,1], only 1 for SATA.
+
+
+What: /sys/class/ata_device/devX[.Y].Z/spdn_cnt
+What: /sys/class/ata_device/devX[.Y].Z/gscr
+What: /sys/class/ata_device/devX[.Y].Z/ering
+What: /sys/class/ata_device/devX[.Y].Z/id
+What: /sys/class/ata_device/devX[.Y].Z/pio_mode
+What: /sys/class/ata_device/devX[.Y].Z/xfer_mode
+What: /sys/class/ata_device/devX[.Y].Z/dma_mode
+What: /sys/class/ata_device/devX[.Y].Z/class
+Date: May, 2010
+KernelVersion: v2.6.37
+Contact: Gwendal Grignou <gwendal@chromium.org>
+Description:
+ spdn_cnt: (RO) Number of times libata decided to lower the
+ speed of link due to errors.
- Transfer modes supported by the device when in DMA mode.
- Mostly used by PATA device.
+ gscr: (RO) Cached result of the dump of PM GSCR
+ register. Valid registers are:
-pio_mode
+ 0: SATA_PMP_GSCR_PROD_ID,
+ 1: SATA_PMP_GSCR_REV,
+ 2: SATA_PMP_GSCR_PORT_INFO,
+ 32: SATA_PMP_GSCR_ERROR,
+ 33: SATA_PMP_GSCR_ERROR_EN,
+ 64: SATA_PMP_GSCR_FEAT,
+ 96: SATA_PMP_GSCR_FEAT_EN,
+ 130: SATA_PMP_GSCR_SII_GPIO
- Transfer modes supported by the device when in PIO mode.
- Mostly used by PATA device.
+ Only valid if the device is a PM.
-xfer_mode
+ ering: (RO) Formatted output of the error ring of the
+ device.
- Current transfer mode.
+ id: (RO) Cached result of IDENTIFY command, as
+ described in ATA8 7.16 and 7.17. Only valid if
+ the device is not a PM.
-id
+ pio_mode: (RO) Transfer modes supported by the device when
+ in PIO mode. Mostly used by PATA device.
- Cached result of IDENTIFY command, as described in ATA8 7.16 and 7.17.
- Only valid if the device is not a PM.
+ xfer_mode: (RO) Current transfer mode
-gscr
+ dma_mode: (RO) Transfer modes supported by the device when
+ in DMA mode. Mostly used by PATA device.
- Cached result of the dump of PM GSCR register.
- Valid registers are:
- 0: SATA_PMP_GSCR_PROD_ID,
- 1: SATA_PMP_GSCR_REV,
- 2: SATA_PMP_GSCR_PORT_INFO,
- 32: SATA_PMP_GSCR_ERROR,
- 33: SATA_PMP_GSCR_ERROR_EN,
- 64: SATA_PMP_GSCR_FEAT,
- 96: SATA_PMP_GSCR_FEAT_EN,
- 130: SATA_PMP_GSCR_SII_GPIO
- Only valid if the device is a PM.
+ class: (RO) Device class. Can be "ata" for disk,
+ "atapi" for packet device, "pmp" for PM, or
+ "none" if no device was found behind the link.
-trim
- Shows the DSM TRIM mode currently used by the device. Valid
- values are:
- unsupported: Drive does not support DSM TRIM
- unqueued: Drive supports unqueued DSM TRIM only
- queued: Drive supports queued DSM TRIM
- forced_unqueued: Drive's queued DSM support is known to be
- buggy and only unqueued TRIM commands
- are sent
+What: /sys/class/ata_device/devX[.Y].Z/trim
+Date: May, 2015
+KernelVersion: v4.10
+Contact: Gwendal Grignou <gwendal@chromium.org>
+Description:
+ (RO) Shows the DSM TRIM mode currently used by the device. Valid
+ values are:
-spdn_cnt
+ unsupported: Drive does not support DSM TRIM
- Number of time libata decided to lower the speed of link due to errors.
+ unqueued: Drive supports unqueued DSM TRIM only
-ering
+ queued: Drive supports queued DSM TRIM
- Formatted output of the error ring of the device.
+ forced_unqueued: Drive's queued DSM support is known to
+ be buggy and only unqueued TRIM commands
+ are sent
--- /dev/null
+What: /sys/block/*/device/sw_activity
+Date: Jun, 2008
+KernelVersion: v2.6.27
+Contact: linux-ide@vger.kernel.org
+Description:
+ (RW) Used by drivers which support software controlled activity
+ LEDs.
+
+ It has the following valid values:
+
+ 0 OFF - the LED is not activated on activity
+ 1 BLINK_ON - the LED blinks on every 10ms when activity is
+ detected.
+ 2 BLINK_OFF - the LED is on when idle, and blinks off
+ every 10ms when activity is detected.
+
+ Note that the user must turn sw_activity OFF it they wish to
+ control the activity LED via the em_message file.
+
+
+What: /sys/block/*/device/unload_heads
+Date: Sep, 2008
+KernelVersion: v2.6.28
+Contact: linux-ide@vger.kernel.org
+Description:
+ (RW) Hard disk shock protection
+
+ Writing an integer value to this file will take the heads of the
+ respective drive off the platter and block all I/O operations
+ for the specified number of milliseconds.
+
+ - If the device does not support the unload heads feature,
+ access is denied with -EOPNOTSUPP.
+ - The maximal value accepted for a timeout is 30000
+ milliseconds.
+ - A previously set timeout can be cancelled and disk can resume
+ normal operation immediately by specifying a timeout of 0.
+ - Some hard drives only comply with an earlier version of the
+ ATA standard, but support the unload feature nonetheless.
+ There is no safe way Linux can detect these devices, so this
+ is not enabled by default. If it is known that your device
+ does support the unload feature, then you can tell the kernel
+ to enable it by writing -1. It can be disabled again by
+ writing -2.
+ - Values below -2 are rejected with -EINVAL
+
+ For more information, see
+ Documentation/laptops/disk-shock-protection.txt
+
+
+What: /sys/block/*/device/ncq_prio_enable
+Date: Oct, 2016
+KernelVersion: v4.10
+Contact: linux-ide@vger.kernel.org
+Description:
+ (RW) Write to the file to turn on or off the SATA ncq (native
+ command queueing) support. By default this feature is turned
+ off.
the direct i/o path to physical devices. This setting is
controller wide, affecting all configured logical drives on the
controller. This file is readable and writable.
+
+What: /sys/class/scsi_host/hostX/link_power_management_policy
+Date: Oct, 2007
+KernelVersion: v2.6.24
+Contact: linux-ide@vger.kernel.org
+Description:
+ (RW) This parameter allows the user to read and set the link
+ (interface) power management.
+
+ There are four possible options:
+
+ min_power: Tell the controller to try to make the link use the
+ least possible power when possible. This may sacrifice some
+ performance due to increased latency when coming out of lower
+ power states.
+
+ max_performance: Generally, this means no power management.
+ Tell the controller to have performance be a priority over power
+ management.
+
+ medium_power: Tell the controller to enter a lower power state
+ when possible, but do not enter the lowest power state, thus
+ improving latency over min_power setting.
+
+ med_power_with_dipm: Identical to the existing medium_power
+ setting except that it enables dipm (device initiated power
+ management) on top, which makes it match the Windows IRST (Intel
+ Rapid Storage Technology) driver settings. This setting is also
+ close to min_power, except that:
+ a) It does not use host-initiated slumber mode, but it does
+ allow device-initiated slumber
+ b) It does not enable low power device sleep mode (DevSlp).
+
+What: /sys/class/scsi_host/hostX/em_message
+What: /sys/class/scsi_host/hostX/em_message_type
+Date: Jun, 2008
+KernelVersion: v2.6.27
+Contact: linux-ide@vger.kernel.org
+Description:
+ em_message: (RW) Enclosure management support. For the LED
+ protocol, writes and reads correspond to the LED message format
+ as defined in the AHCI spec.
+
+ The user must turn sw_activity (under /sys/block/*/device/) OFF
+ it they wish to control the activity LED via the em_message
+ file.
+
+ em_message_type: (RO) Displays the current enclosure management
+ protocol that is being used by the driver (for eg. LED, SAF-TE,
+ SES-2, SGPIO etc).
+
+What: /sys/class/scsi_host/hostX/ahci_port_cmd
+What: /sys/class/scsi_host/hostX/ahci_host_caps
+What: /sys/class/scsi_host/hostX/ahci_host_cap2
+Date: Mar, 2010
+KernelVersion: v2.6.35
+Contact: linux-ide@vger.kernel.org
+Description:
+ [to be documented]
+
+What: /sys/class/scsi_host/hostX/ahci_host_version
+Date: Mar, 2010
+KernelVersion: v2.6.35
+Contact: linux-ide@vger.kernel.org
+Description:
+ (RO) Display the version of the AHCI spec implemented by the
+ host.
+
+What: /sys/class/scsi_host/hostX/em_buffer
+Date: Apr, 2010
+KernelVersion: v2.6.35
+Contact: linux-ide@vger.kernel.org
+Description:
+ (RW) Allows access to AHCI EM (enclosure management) buffer
+ directly if the host supports EM.
+
+ For eg. the AHCI driver supports SGPIO EM messages but the
+ SATA/AHCI specs do not define the SGPIO message format of the EM
+ buffer. Different hardware(HW) vendors may have different
+ definitions. With the em_buffer attribute, this issue can be
+ solved by allowing HW vendors to provide userland drivers and
+ tools for their SGPIO initiators.
+
+What: /sys/class/scsi_host/hostX/em_message_supported
+Date: Oct, 2009
+KernelVersion: v2.6.39
+Contact: linux-ide@vger.kernel.org
+Description:
+ (RO) Displays supported enclosure management message types.
Associate an event fd to an AFU interrupt so that the user process
can be notified when the AFU sends an interrupt.
+OCXL_IOCTL_GET_METADATA:
+
+ Obtains configuration information from the card, such at the size of
+ MMIO areas, the AFU version, and the PASID for the current context.
+
mmap
----
interrupts.
Optional properties:
-- clocks: Optional reference to the clock used by the XOR engine.
+- clocks: Optional reference to the clocks used by the XOR engine.
+- clock-names: mandatory if there is a second clock, in this case the
+ name must be "core" for the first clock and "reg" for the second
+ one
+
Example:
compatible = "marvell,mv88e6085";
reg = <0>;
reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
- };
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- switch1phy0: switch1phy0@0 {
- reg = <0>;
- interrupt-parent = <&switch0>;
- interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ switch1phy0: switch1phy0@0 {
+ reg = <0>;
+ interrupt-parent = <&switch0>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+ };
};
};
};
compatible = "marvell,mv88e6390";
reg = <0>;
reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
- };
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- switch1phy0: switch1phy0@0 {
- reg = <0>;
- interrupt-parent = <&switch0>;
- interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ switch1phy0: switch1phy0@0 {
+ reg = <0>;
+ interrupt-parent = <&switch0>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+ };
};
- };
- mdio1 {
- compatible = "marvell,mv88e6xxx-mdio-external";
- #address-cells = <1>;
- #size-cells = <0>;
- switch1phy9: switch1phy0@9 {
- reg = <9>;
+ mdio1 {
+ compatible = "marvell,mv88e6xxx-mdio-external";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ switch1phy9: switch1phy0@9 {
+ reg = <9>;
+ };
};
};
};
- "renesas,etheravb-r8a7795" for the R8A7795 SoC.
- "renesas,etheravb-r8a7796" for the R8A7796 SoC.
- "renesas,etheravb-r8a77970" for the R8A77970 SoC.
+ - "renesas,etheravb-r8a77980" for the R8A77980 SoC.
- "renesas,etheravb-r8a77995" for the R8A77995 SoC.
- "renesas,etheravb-rcar-gen3" as a fallback for the above
R-Car Gen3 devices.
SoC-specific version corresponding to the platform first followed by
the generic version.
-- reg: offset and length of (1) the register block and (2) the stream buffer.
+- reg: Offset and length of (1) the register block and (2) the stream buffer.
+ The region for the register block is mandatory.
+ The region for the stream buffer is optional, as it is only present on
+ R-Car Gen2 and RZ/G1 SoCs, and on R-Car H3 (R8A7795), M3-W (R8A7796),
+ and M3-N (R8A77965).
- interrupts: A list of interrupt-specifiers, one for each entry in
interrupt-names.
If interrupt-names is not present, an interrupt specifier
configured in FS mode;
- "st,stm32f4x9-hsotg": The DWC2 USB HS controller instance in STM32F4x9 SoCs
configured in HS mode;
- - "st,stm32f7xx-hsotg": The DWC2 USB HS controller instance in STM32F7xx SoCs
+ - "st,stm32f7-hsotg": The DWC2 USB HS controller instance in STM32F7 SoCs
configured in HS mode;
- reg : Should contain 1 register range (address and length)
- interrupts : Should contain 1 interrupt
- compatible: Must contain one of the following:
- "renesas,r8a7795-usb3-peri"
- "renesas,r8a7796-usb3-peri"
+ - "renesas,r8a77965-usb3-peri"
- "renesas,rcar-gen3-usb3-peri" for a generic R-Car Gen3 compatible
device
- "renesas,usbhs-r8a7794" for r8a7794 (R-Car E2) compatible device
- "renesas,usbhs-r8a7795" for r8a7795 (R-Car H3) compatible device
- "renesas,usbhs-r8a7796" for r8a7796 (R-Car M3-W) compatible device
+ - "renesas,usbhs-r8a77965" for r8a77965 (R-Car M3-N) compatible device
- "renesas,usbhs-r8a77995" for r8a77995 (R-Car D3) compatible device
- "renesas,usbhs-r7s72100" for r7s72100 (RZ/A1) compatible device
- "renesas,rcar-gen2-usbhs" for R-Car Gen2 or RZ/G1 compatible devices
- "renesas,xhci-r8a7793" for r8a7793 SoC
- "renesas,xhci-r8a7795" for r8a7795 SoC
- "renesas,xhci-r8a7796" for r8a7796 SoC
+ - "renesas,xhci-r8a77965" for r8a77965 SoC
- "renesas,rcar-gen2-xhci" for a generic R-Car Gen2 or RZ/G1 compatible
device
- "renesas,rcar-gen3-xhci" for a generic R-Car Gen3 compatible device
- If you don't have an HCDP, the kernel doesn't know where
your console lives until the driver discovers serial
- devices. Use "console=uart, io,0x3f8" (or appropriate
+ devices. Use "console=uart,io,0x3f8" (or appropriate
address for your machine).
Kernel and init script output works fine, but no "login:" prompt:
TCP segmentation allows a device to segment a single frame into multiple
frames with a data payload size specified in skb_shinfo()->gso_size.
-When TCP segmentation requested the bit for either SKB_GSO_TCP or
-SKB_GSO_TCP6 should be set in skb_shinfo()->gso_type and
+When TCP segmentation requested the bit for either SKB_GSO_TCPV4 or
+SKB_GSO_TCPV6 should be set in skb_shinfo()->gso_type and
skb_shinfo()->gso_size should be set to a non-zero value.
TCP segmentation is dependent on support for the use of partial checksum
Therefore, any code in the core networking stack must be aware of the
possibility that gso_size will be GSO_BY_FRAGS and handle that case
-appropriately. (For size checks, the skb_gso_validate_*_len family of
-helpers do this automatically.)
+appropriately.
+
+There are some helpers to make this easier:
+
+ - skb_is_gso(skb) && skb_is_gso_sctp(skb) is the best way to see if
+ an skb is an SCTP GSO skb.
+
+ - For size checks, the skb_gso_validate_*_len family of helpers correctly
+ considers GSO_BY_FRAGS.
+
+ - For manipulating packets, skb_increase_gso_size and skb_decrease_gso_size
+ will check for GSO_BY_FRAGS and WARN if asked to manipulate these skbs.
This also affects drivers with the NETIF_F_FRAGLIST & NETIF_F_GSO_SCTP bits
set. Note also that NETIF_F_GSO_SCTP is included in NETIF_F_GSO_SOFTWARE.
from docutils import nodes, statemachine
from docutils.statemachine import ViewList
-from docutils.parsers.rst import directives
-from sphinx.util.compat import Directive
+from docutils.parsers.rst import directives, Directive
from sphinx.ext.autodoc import AutodocReporter
__version__ = '1.0'
F: include/linux/nvmem-consumer.h
F: include/linux/nvmem-provider.h
+NXP SGTL5000 DRIVER
+M: Fabio Estevam <fabio.estevam@nxp.com>
+L: alsa-devel@alsa-project.org (moderated for non-subscribers)
+S: Maintained
+F: Documentation/devicetree/bindings/sound/sgtl5000.txt
+F: sound/soc/codecs/sgtl5000*
+
NXP TDA998X DRM DRIVER
M: Russell King <linux@armlinux.org.uk>
S: Supported
PER-CPU MEMORY ALLOCATOR
M: Tejun Heo <tj@kernel.org>
M: Christoph Lameter <cl@linux.com>
+M: Dennis Zhou <dennisszhou@gmail.com>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu.git
S: Maintained
F: include/linux/percpu*.h
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
S: Supported
F: sound/soc/samsung/
+F: Documentation/devicetree/bindings/sound/samsung*
SAMSUNG EXYNOS PSEUDO RANDOM NUMBER GENERATOR (RNG) DRIVER
M: Krzysztof Kozlowski <krzk@kernel.org>
VERSION = 4
PATCHLEVEL = 16
SUBLEVEL = 0
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc6
NAME = Fearless Coyote
# *DOCUMENTATION*
# disable invalid "can't wrap" optimizations for signed / pointers
KBUILD_CFLAGS += $(call cc-option,-fno-strict-overflow)
+# clang sets -fmerge-all-constants by default as optimization, but this
+# is non-conforming behavior for C and in fact breaks the kernel, so we
+# need to disable it here generally.
+KBUILD_CFLAGS += $(call cc-option,-fno-merge-all-constants)
+
+# for gcc -fno-merge-all-constants disables everything, but it is fine
+# to have actual conforming behavior enabled.
+KBUILD_CFLAGS += $(call cc-option,-fmerge-constants)
+
# Make sure -fstack-check isn't enabled (like gentoo apparently did)
KBUILD_CFLAGS += $(call cc-option,-fno-stack-check,)
config MACH_DNS323
bool "D-Link DNS-323"
- select GENERIC_NET_UTILS
select I2C_BOARDINFO if I2C
help
Say 'Y' here if you want your kernel to support the
config MACH_TS209
bool "QNAP TS-109/TS-209"
- select GENERIC_NET_UTILS
help
Say 'Y' here if you want your kernel to support the
QNAP TS-109/TS-209 platform.
config MACH_TS409
bool "QNAP TS-409"
- select GENERIC_NET_UTILS
help
Say 'Y' here if you want your kernel to support the
QNAP TS-409 platform.
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
};
+/* dns323_parse_hex_*() taken from tsx09-common.c; should a common copy of these
+ * functions be kept somewhere?
+ */
+static int __init dns323_parse_hex_nibble(char n)
+{
+ if (n >= '0' && n <= '9')
+ return n - '0';
+
+ if (n >= 'A' && n <= 'F')
+ return n - 'A' + 10;
+
+ if (n >= 'a' && n <= 'f')
+ return n - 'a' + 10;
+
+ return -1;
+}
+
+static int __init dns323_parse_hex_byte(const char *b)
+{
+ int hi;
+ int lo;
+
+ hi = dns323_parse_hex_nibble(b[0]);
+ lo = dns323_parse_hex_nibble(b[1]);
+
+ if (hi < 0 || lo < 0)
+ return -1;
+
+ return (hi << 4) | lo;
+}
+
static int __init dns323_read_mac_addr(void)
{
u_int8_t addr[6];
- void __iomem *mac_page;
+ int i;
+ char *mac_page;
/* MAC address is stored as a regular ol' string in /dev/mtdblock4
* (0x007d0000-0x00800000) starting at offset 196480 (0x2ff80).
if (!mac_page)
return -ENOMEM;
- if (!mac_pton((__force const char *) mac_page, addr))
- goto error_fail;
+ /* Sanity check the string we're looking at */
+ for (i = 0; i < 5; i++) {
+ if (*(mac_page + (i * 3) + 2) != ':') {
+ goto error_fail;
+ }
+ }
+
+ for (i = 0; i < 6; i++) {
+ int byte;
+
+ byte = dns323_parse_hex_byte(mac_page + (i * 3));
+ if (byte < 0) {
+ goto error_fail;
+ }
+
+ addr[i] = byte;
+ }
iounmap(mac_page);
printk("DNS-323: Found ethernet MAC address: %pM\n", addr);
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
};
+static int __init qnap_tsx09_parse_hex_nibble(char n)
+{
+ if (n >= '0' && n <= '9')
+ return n - '0';
+
+ if (n >= 'A' && n <= 'F')
+ return n - 'A' + 10;
+
+ if (n >= 'a' && n <= 'f')
+ return n - 'a' + 10;
+
+ return -1;
+}
+
+static int __init qnap_tsx09_parse_hex_byte(const char *b)
+{
+ int hi;
+ int lo;
+
+ hi = qnap_tsx09_parse_hex_nibble(b[0]);
+ lo = qnap_tsx09_parse_hex_nibble(b[1]);
+
+ if (hi < 0 || lo < 0)
+ return -1;
+
+ return (hi << 4) | lo;
+}
+
static int __init qnap_tsx09_check_mac_addr(const char *addr_str)
{
u_int8_t addr[6];
+ int i;
- if (!mac_pton(addr_str, addr))
- return -1;
+ for (i = 0; i < 6; i++) {
+ int byte;
+
+ /*
+ * Enforce "xx:xx:xx:xx:xx:xx\n" format.
+ */
+ if (addr_str[(i * 3) + 2] != ((i < 5) ? ':' : '\n'))
+ return -1;
+
+ byte = qnap_tsx09_parse_hex_byte(addr_str + (i * 3));
+ if (byte < 0)
+ return -1;
+ addr[i] = byte;
+ }
printk(KERN_INFO "tsx09: found ethernet mac address %pM\n", addr);
unsigned long addr;
for (addr = mem_base; addr < (mem_base + size); addr += 1024) {
- void __iomem *nor_page;
+ char *nor_page;
int ret = 0;
nor_page = ioremap(addr, 1024);
if (nor_page != NULL) {
- ret = qnap_tsx09_check_mac_addr((__force const char *)nor_page);
+ ret = qnap_tsx09_check_mac_addr(nor_page);
iounmap(nor_page);
}
case PSCI_CONDUIT_HVC:
arm_smccc_1_1_hvc(ARM_SMCCC_ARCH_FEATURES_FUNC_ID,
ARM_SMCCC_ARCH_WORKAROUND_1, &res);
- if (res.a0)
+ if ((int)res.a0 < 0)
return 0;
cb = call_hvc_arch_workaround_1;
smccc_start = __smccc_workaround_1_hvc_start;
case PSCI_CONDUIT_SMC:
arm_smccc_1_1_smc(ARM_SMCCC_ARCH_FEATURES_FUNC_ID,
ARM_SMCCC_ARCH_WORKAROUND_1, &res);
- if (res.a0)
+ if ((int)res.a0 < 0)
return 0;
cb = call_smc_arch_workaround_1;
smccc_start = __smccc_workaround_1_smc_start;
{
int ret = 0;
- vcpu_load(vcpu);
-
trace_kvm_set_guest_debug(vcpu, dbg->control);
if (dbg->control & ~KVM_GUESTDBG_VALID_MASK) {
}
out:
- vcpu_put(vcpu);
return ret;
}
* The following mapping attributes may be updated in live
* kernel mappings without the need for break-before-make.
*/
- static const pteval_t mask = PTE_PXN | PTE_RDONLY | PTE_WRITE;
+ static const pteval_t mask = PTE_PXN | PTE_RDONLY | PTE_WRITE | PTE_NG;
/* creating or taking down mappings is always safe */
if (old == 0 || new == 0)
if ((old | new) & PTE_CONT)
return false;
- /* Transitioning from Global to Non-Global is safe */
- if (((old ^ new) == PTE_NG) && (new & PTE_NG))
- return true;
+ /* Transitioning from Non-Global to Global is unsafe */
+ if (old & ~new & PTE_NG)
+ return false;
return ((old ^ new) & ~mask) == 0;
}
ATOMIC_OPS(sub, -)
#ifdef __OPTIMIZE__
-#define __ia64_atomic_const(i) __builtin_constant_p(i) ? \
+#define __ia64_atomic_const(i) \
+ static const int __ia64_atomic_p = __builtin_constant_p(i) ? \
((i) == 1 || (i) == 4 || (i) == 8 || (i) == 16 || \
- (i) == -1 || (i) == -4 || (i) == -8 || (i) == -16) : 0
+ (i) == -1 || (i) == -4 || (i) == -8 || (i) == -16) : 0;\
+ __ia64_atomic_p
+#else
+#define __ia64_atomic_const(i) 0
+#endif
-#define atomic_add_return(i, v) \
+#define atomic_add_return(i,v) \
({ \
- int __i = (i); \
- static const int __ia64_atomic_p = __ia64_atomic_const(i); \
- __ia64_atomic_p ? ia64_fetch_and_add(__i, &(v)->counter) : \
- ia64_atomic_add(__i, v); \
+ int __ia64_aar_i = (i); \
+ __ia64_atomic_const(i) \
+ ? ia64_fetch_and_add(__ia64_aar_i, &(v)->counter) \
+ : ia64_atomic_add(__ia64_aar_i, v); \
})
-#define atomic_sub_return(i, v) \
+#define atomic_sub_return(i,v) \
({ \
- int __i = (i); \
- static const int __ia64_atomic_p = __ia64_atomic_const(i); \
- __ia64_atomic_p ? ia64_fetch_and_add(-__i, &(v)->counter) : \
- ia64_atomic_sub(__i, v); \
+ int __ia64_asr_i = (i); \
+ __ia64_atomic_const(i) \
+ ? ia64_fetch_and_add(-__ia64_asr_i, &(v)->counter) \
+ : ia64_atomic_sub(__ia64_asr_i, v); \
})
-#else
-#define atomic_add_return(i, v) ia64_atomic_add(i, v)
-#define atomic_sub_return(i, v) ia64_atomic_sub(i, v)
-#endif
#define atomic_fetch_add(i,v) \
({ \
int __ia64_aar_i = (i); \
- (__builtin_constant_p(i) \
- && ( (__ia64_aar_i == 1) || (__ia64_aar_i == 4) \
- || (__ia64_aar_i == 8) || (__ia64_aar_i == 16) \
- || (__ia64_aar_i == -1) || (__ia64_aar_i == -4) \
- || (__ia64_aar_i == -8) || (__ia64_aar_i == -16))) \
+ __ia64_atomic_const(i) \
? ia64_fetchadd(__ia64_aar_i, &(v)->counter, acq) \
: ia64_atomic_fetch_add(__ia64_aar_i, v); \
})
#define atomic_fetch_sub(i,v) \
({ \
int __ia64_asr_i = (i); \
- (__builtin_constant_p(i) \
- && ( (__ia64_asr_i == 1) || (__ia64_asr_i == 4) \
- || (__ia64_asr_i == 8) || (__ia64_asr_i == 16) \
- || (__ia64_asr_i == -1) || (__ia64_asr_i == -4) \
- || (__ia64_asr_i == -8) || (__ia64_asr_i == -16))) \
+ __ia64_atomic_const(i) \
? ia64_fetchadd(-__ia64_asr_i, &(v)->counter, acq) \
: ia64_atomic_fetch_sub(__ia64_asr_i, v); \
})
#define atomic64_add_return(i,v) \
({ \
long __ia64_aar_i = (i); \
- (__builtin_constant_p(i) \
- && ( (__ia64_aar_i == 1) || (__ia64_aar_i == 4) \
- || (__ia64_aar_i == 8) || (__ia64_aar_i == 16) \
- || (__ia64_aar_i == -1) || (__ia64_aar_i == -4) \
- || (__ia64_aar_i == -8) || (__ia64_aar_i == -16))) \
+ __ia64_atomic_const(i) \
? ia64_fetch_and_add(__ia64_aar_i, &(v)->counter) \
: ia64_atomic64_add(__ia64_aar_i, v); \
})
#define atomic64_sub_return(i,v) \
({ \
long __ia64_asr_i = (i); \
- (__builtin_constant_p(i) \
- && ( (__ia64_asr_i == 1) || (__ia64_asr_i == 4) \
- || (__ia64_asr_i == 8) || (__ia64_asr_i == 16) \
- || (__ia64_asr_i == -1) || (__ia64_asr_i == -4) \
- || (__ia64_asr_i == -8) || (__ia64_asr_i == -16))) \
+ __ia64_atomic_const(i) \
? ia64_fetch_and_add(-__ia64_asr_i, &(v)->counter) \
: ia64_atomic64_sub(__ia64_asr_i, v); \
})
#define atomic64_fetch_add(i,v) \
({ \
long __ia64_aar_i = (i); \
- (__builtin_constant_p(i) \
- && ( (__ia64_aar_i == 1) || (__ia64_aar_i == 4) \
- || (__ia64_aar_i == 8) || (__ia64_aar_i == 16) \
- || (__ia64_aar_i == -1) || (__ia64_aar_i == -4) \
- || (__ia64_aar_i == -8) || (__ia64_aar_i == -16))) \
+ __ia64_atomic_const(i) \
? ia64_fetchadd(__ia64_aar_i, &(v)->counter, acq) \
: ia64_atomic64_fetch_add(__ia64_aar_i, v); \
})
#define atomic64_fetch_sub(i,v) \
({ \
long __ia64_asr_i = (i); \
- (__builtin_constant_p(i) \
- && ( (__ia64_asr_i == 1) || (__ia64_asr_i == 4) \
- || (__ia64_asr_i == 8) || (__ia64_asr_i == 16) \
- || (__ia64_asr_i == -1) || (__ia64_asr_i == -4) \
- || (__ia64_asr_i == -8) || (__ia64_asr_i == -16))) \
+ __ia64_atomic_const(i) \
? ia64_fetchadd(-__ia64_asr_i, &(v)->counter, acq) \
: ia64_atomic64_fetch_sub(__ia64_asr_i, v); \
})
#ifdef ERR_INJ_DEBUG
printk(KERN_DEBUG "Returns: status=%d,\n", (int)status[cpu]);
- printk(KERN_DEBUG "capapbilities=%lx,\n", capabilities[cpu]);
+ printk(KERN_DEBUG "capabilities=%lx,\n", capabilities[cpu]);
printk(KERN_DEBUG "resources=%lx\n", resources[cpu]);
#endif
return size;
u64 virt_addr=simple_strtoull(buf, NULL, 16);
int ret;
- ret = get_user_pages(virt_addr, 1, FOLL_WRITE, NULL, NULL);
+ ret = get_user_pages_fast(virt_addr, 1, FOLL_WRITE, NULL);
if (ret<=0) {
#ifdef ERR_INJ_DEBUG
printk("Virtual address %lx is not existing.\n",virt_addr);
import sys
if len(sys.argv) != 2:
- print "Usage: %s FILE" % sys.argv[0]
+ print("Usage: %s FILE" % sys.argv[0])
sys.exit(2)
readelf = os.getenv("READELF", "readelf")
global num_errors
num_errors += 1
if not func: func = "[%#x-%#x]" % (start, end)
- print "ERROR: %s: %lu slots, total region length = %lu" % (func, slots, rlen_sum)
+ print("ERROR: %s: %lu slots, total region length = %lu" % (func, slots, rlen_sum))
return
num_funcs = 0
check_func(func, slots, rlen_sum)
func = m.group(1)
- start = long(m.group(2), 16)
- end = long(m.group(3), 16)
+ start = int(m.group(2), 16)
+ end = int(m.group(3), 16)
slots = 3 * (end - start) / 16
- rlen_sum = 0L
+ rlen_sum = 0
num_funcs += 1
else:
m = rlen_pattern.match(line)
if m:
- rlen_sum += long(m.group(1))
+ rlen_sum += int(m.group(1))
check_func(func, slots, rlen_sum)
if num_errors == 0:
- print "No errors detected in %u functions." % num_funcs
+ print("No errors detected in %u functions." % num_funcs)
else:
if num_errors > 1:
err="errors"
else:
err="error"
- print "%u %s detected in %u functions." % (num_errors, err, num_funcs)
+ print("%u %s detected in %u functions." % (num_errors, err, num_funcs))
sys.exit(1)
select HAVE_FTRACE_MCOUNT_RECORD
select HAVE_FUNCTION_GRAPH_TRACER
select HAVE_FUNCTION_TRACER
+ select NO_BOOTMEM
select HAVE_MEMBLOCK
select HAVE_MEMBLOCK_NODE_MAP
select HAVE_OPROFILE
config OPT_LIB_FUNCTION
bool "Optimalized lib function"
- depends on CPU_LITTLE_ENDIAN
default y
help
Allows turn on optimalized library function (memcpy and memmove).
config OPT_LIB_ASM
bool "Optimalized lib function ASM"
depends on OPT_LIB_FUNCTION && (XILINX_MICROBLAZE0_USE_BARREL = 1)
+ depends on CPU_BIG_ENDIAN
default n
help
Allows turn on optimalized library function (memcpy and memmove).
void machine_halt(void);
void machine_power_off(void);
-extern void *alloc_maybe_bootmem(size_t size, gfp_t mask);
extern void *zalloc_maybe_bootmem(size_t size, gfp_t mask);
# endif /* __ASSEMBLY__ */
* between mem locations with size of xfer spec'd in bytes
*/
-#ifdef __MICROBLAZEEL__
-#error Microblaze LE not support ASM optimized lib func. Disable OPT_LIB_ASM.
-#endif
-
#include <linux/linkage.h>
.text
.globl memcpy
#ifndef CONFIG_MMU
unsigned int __page_offset;
EXPORT_SYMBOL(__page_offset);
-
-#else
-static int init_bootmem_done;
#endif /* CONFIG_MMU */
char *klimit = _end;
void __init setup_memory(void)
{
- unsigned long map_size;
struct memblock_region *reg;
#ifndef CONFIG_MMU
pr_info("%s: max_low_pfn: %#lx\n", __func__, max_low_pfn);
pr_info("%s: max_pfn: %#lx\n", __func__, max_pfn);
- /*
- * Find an area to use for the bootmem bitmap.
- * We look for the first area which is at least
- * 128kB in length (128kB is enough for a bitmap
- * for 4GB of memory, using 4kB pages), plus 1 page
- * (in case the address isn't page-aligned).
- */
- map_size = init_bootmem_node(NODE_DATA(0),
- PFN_UP(TOPHYS((u32)klimit)), min_low_pfn, max_low_pfn);
- memblock_reserve(PFN_UP(TOPHYS((u32)klimit)) << PAGE_SHIFT, map_size);
-
/* Add active regions with valid PFNs */
for_each_memblock(memory, reg) {
unsigned long start_pfn, end_pfn;
&memblock.memory, 0);
}
- /* free bootmem is whole main memory */
- free_bootmem_with_active_regions(0, max_low_pfn);
-
- /* reserve allocate blocks */
- for_each_memblock(reserved, reg) {
- unsigned long top = reg->base + reg->size - 1;
-
- pr_debug("reserved - 0x%08x-0x%08x, %lx, %lx\n",
- (u32) reg->base, (u32) reg->size, top,
- memory_start + lowmem_size - 1);
-
- if (top <= (memory_start + lowmem_size - 1)) {
- reserve_bootmem(reg->base, reg->size, BOOTMEM_DEFAULT);
- } else if (reg->base < (memory_start + lowmem_size - 1)) {
- unsigned long trunc_size = memory_start + lowmem_size -
- reg->base;
- reserve_bootmem(reg->base, trunc_size, BOOTMEM_DEFAULT);
- }
- }
-
/* XXX need to clip this if using highmem? */
sparse_memory_present_with_active_regions(0);
-#ifdef CONFIG_MMU
- init_bootmem_done = 1;
-#endif
paging_init();
}
/* This is only called until mem_init is done. */
void __init *early_get_page(void)
{
- void *p;
- if (init_bootmem_done) {
- p = alloc_bootmem_pages(PAGE_SIZE);
- } else {
- /*
- * Mem start + kernel_tlb -> here is limit
- * because of mem mapping from head.S
- */
- p = __va(memblock_alloc_base(PAGE_SIZE, PAGE_SIZE,
- memory_start + kernel_tlb));
- }
- return p;
+ /*
+ * Mem start + kernel_tlb -> here is limit
+ * because of mem mapping from head.S
+ */
+ return __va(memblock_alloc_base(PAGE_SIZE, PAGE_SIZE,
+ memory_start + kernel_tlb));
}
#endif /* CONFIG_MMU */
-void * __ref alloc_maybe_bootmem(size_t size, gfp_t mask)
-{
- if (mem_init_done)
- return kmalloc(size, mask);
- else
- return alloc_bootmem(size);
-}
-
void * __ref zalloc_maybe_bootmem(size_t size, gfp_t mask)
{
void *p;
}
board_data = kzalloc(BOARD_CONFIG_BUFSZ, GFP_KERNEL);
+ if (!board_data)
+ goto error;
ath25_board.config = (struct ath25_boarddata *)board_data;
memcpy_fromio(board_data, bcfg, 0x100);
if (broken_boarddata) {
}
host_data = kzalloc(sizeof(*host_data), GFP_KERNEL);
+ if (!host_data)
+ return -ENOMEM;
raw_spin_lock_init(&host_data->lock);
addr = of_get_address(ciu_node, 0, NULL, NULL);
return;
}
- if (request_irq(IPI0_IRQ, bmips_ipi_interrupt, IRQF_PERCPU,
- "smp_ipi0", NULL))
+ if (request_irq(IPI0_IRQ, bmips_ipi_interrupt,
+ IRQF_PERCPU | IRQF_NO_SUSPEND, "smp_ipi0", NULL))
panic("Can't request IPI0 interrupt");
- if (request_irq(IPI1_IRQ, bmips_ipi_interrupt, IRQF_PERCPU,
- "smp_ipi1", NULL))
+ if (request_irq(IPI1_IRQ, bmips_ipi_interrupt,
+ IRQF_PERCPU | IRQF_NO_SUSPEND, "smp_ipi1", NULL))
panic("Can't request IPI1 interrupt");
}
config LEMOTE_FULOONG2E
bool "Lemote Fuloong(2e) mini-PC"
select ARCH_SPARSEMEM_ENABLE
+ select ARCH_MIGHT_HAVE_PC_PARPORT
+ select ARCH_MIGHT_HAVE_PC_SERIO
select CEVT_R4K
select CSRC_R4K
select SYS_HAS_CPU_LOONGSON2E
config LEMOTE_MACH2F
bool "Lemote Loongson 2F family machines"
select ARCH_SPARSEMEM_ENABLE
+ select ARCH_MIGHT_HAVE_PC_PARPORT
+ select ARCH_MIGHT_HAVE_PC_SERIO
select BOARD_SCACHE
select BOOT_ELF32
select CEVT_R4K if ! MIPS_EXTERNAL_TIMER
config LOONGSON_MACH3X
bool "Generic Loongson 3 family machines"
select ARCH_SPARSEMEM_ENABLE
+ select ARCH_MIGHT_HAVE_PC_PARPORT
+ select ARCH_MIGHT_HAVE_PC_SERIO
select GENERIC_ISA_DMA_SUPPORT_BROKEN
select BOOT_ELF32
select BOARD_SCACHE
rp3440, etc. So, avoid it if the mm isn't too big. */
if ((!IS_ENABLED(CONFIG_SMP) || !arch_irqs_disabled()) &&
mm_total_size(mm) >= parisc_cache_flush_threshold) {
- flush_tlb_all();
+ if (mm->context)
+ flush_tlb_all();
flush_cache_all();
return;
}
pfn = pte_pfn(*ptep);
if (!pfn_valid(pfn))
continue;
+ if (unlikely(mm->context))
+ flush_tlb_page(vma, addr);
__flush_cache_page(vma, addr, PFN_PHYS(pfn));
}
}
void flush_cache_range(struct vm_area_struct *vma,
unsigned long start, unsigned long end)
{
+ pgd_t *pgd;
+ unsigned long addr;
+
if ((!IS_ENABLED(CONFIG_SMP) || !arch_irqs_disabled()) &&
end - start >= parisc_cache_flush_threshold) {
- flush_tlb_range(vma, start, end);
+ if (vma->vm_mm->context)
+ flush_tlb_range(vma, start, end);
flush_cache_all();
return;
}
- flush_user_dcache_range_asm(start, end);
- if (vma->vm_flags & VM_EXEC)
- flush_user_icache_range_asm(start, end);
- flush_tlb_range(vma, start, end);
+ if (vma->vm_mm->context == mfsp(3)) {
+ flush_user_dcache_range_asm(start, end);
+ if (vma->vm_flags & VM_EXEC)
+ flush_user_icache_range_asm(start, end);
+ flush_tlb_range(vma, start, end);
+ return;
+ }
+
+ pgd = vma->vm_mm->pgd;
+ for (addr = vma->vm_start; addr < vma->vm_end; addr += PAGE_SIZE) {
+ unsigned long pfn;
+ pte_t *ptep = get_ptep(pgd, addr);
+ if (!ptep)
+ continue;
+ pfn = pte_pfn(*ptep);
+ if (pfn_valid(pfn)) {
+ if (unlikely(vma->vm_mm->context))
+ flush_tlb_page(vma, addr);
+ __flush_cache_page(vma, addr, PFN_PHYS(pfn));
+ }
+ }
}
void
flush_cache_page(struct vm_area_struct *vma, unsigned long vmaddr, unsigned long pfn)
{
- BUG_ON(!vma->vm_mm->context);
-
if (pfn_valid(pfn)) {
- flush_tlb_page(vma, vmaddr);
+ if (likely(vma->vm_mm->context))
+ flush_tlb_page(vma, vmaddr);
__flush_cache_page(vma, vmaddr, PFN_PHYS(pfn));
}
}
libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c
libfdtheader := fdt.h libfdt.h libfdt_internal.h
-$(addprefix $(obj)/,$(libfdt) libfdt-wrapper.o simpleboot.o epapr.o opal.o): \
+$(addprefix $(obj)/,$(libfdt) libfdt-wrapper.o simpleboot.o epapr.o opal.o \
+ treeboot-akebono.o treeboot-currituck.o treeboot-iss4xx.o): \
$(addprefix $(obj)/,$(libfdtheader))
src-wlib-y := string.S crt0.S stdio.c decompress.c main.c \
.mmu = 0,
.hash_ext = 0,
.radix_ext = 0,
- .byte22 = 0,
},
/* option vector 6: IBM PAPR hints */
kmem_cache_free(kvm_pte_cache, ptep);
}
+/* Like pmd_huge() and pmd_large(), but works regardless of config options */
+static inline int pmd_is_leaf(pmd_t pmd)
+{
+ return !!(pmd_val(pmd) & _PAGE_PTE);
+}
+
static int kvmppc_create_pte(struct kvm *kvm, pte_t pte, unsigned long gpa,
unsigned int level, unsigned long mmu_seq)
{
else
new_pmd = pmd_alloc_one(kvm->mm, gpa);
- if (level == 0 && !(pmd && pmd_present(*pmd)))
+ if (level == 0 && !(pmd && pmd_present(*pmd) && !pmd_is_leaf(*pmd)))
new_ptep = kvmppc_pte_alloc();
/* Check if we might have been invalidated; let the guest retry if so */
new_pmd = NULL;
}
pmd = pmd_offset(pud, gpa);
- if (pmd_large(*pmd)) {
- /* Someone else has instantiated a large page here; retry */
- ret = -EAGAIN;
- goto out_unlock;
- }
- if (level == 1 && !pmd_none(*pmd)) {
+ if (pmd_is_leaf(*pmd)) {
+ unsigned long lgpa = gpa & PMD_MASK;
+
+ /*
+ * If we raced with another CPU which has just put
+ * a 2MB pte in after we saw a pte page, try again.
+ */
+ if (level == 0 && !new_ptep) {
+ ret = -EAGAIN;
+ goto out_unlock;
+ }
+ /* Valid 2MB page here already, remove it */
+ old = kvmppc_radix_update_pte(kvm, pmdp_ptep(pmd),
+ ~0UL, 0, lgpa, PMD_SHIFT);
+ kvmppc_radix_tlbie_page(kvm, lgpa, PMD_SHIFT);
+ if (old & _PAGE_DIRTY) {
+ unsigned long gfn = lgpa >> PAGE_SHIFT;
+ struct kvm_memory_slot *memslot;
+ memslot = gfn_to_memslot(kvm, gfn);
+ if (memslot && memslot->dirty_bitmap)
+ kvmppc_update_dirty_map(memslot,
+ gfn, PMD_SIZE);
+ }
+ } else if (level == 1 && !pmd_none(*pmd)) {
/*
* There's a page table page here, but we wanted
* to install a large page. Tell the caller and let
} else {
page = pages[0];
pfn = page_to_pfn(page);
- if (PageHuge(page)) {
- page = compound_head(page);
- pte_size <<= compound_order(page);
+ if (PageCompound(page)) {
+ pte_size <<= compound_order(compound_head(page));
/* See if we can insert a 2MB large-page PTE here */
if (pte_size >= PMD_SIZE &&
- (gpa & PMD_MASK & PAGE_MASK) ==
- (hva & PMD_MASK & PAGE_MASK)) {
+ (gpa & (PMD_SIZE - PAGE_SIZE)) ==
+ (hva & (PMD_SIZE - PAGE_SIZE))) {
level = 1;
pfn &= ~((PMD_SIZE >> PAGE_SHIFT) - 1);
}
}
/* See if we can provide write access */
if (writing) {
- /*
- * We assume gup_fast has set dirty on the host PTE.
- */
pgflags |= _PAGE_WRITE;
} else {
local_irq_save(flags);
ptep = find_current_mm_pte(current->mm->pgd,
hva, NULL, NULL);
- if (ptep && pte_write(*ptep) && pte_dirty(*ptep))
+ if (ptep && pte_write(*ptep))
pgflags |= _PAGE_WRITE;
local_irq_restore(flags);
}
pte = pfn_pte(pfn, __pgprot(pgflags));
ret = kvmppc_create_pte(kvm, pte, gpa, level, mmu_seq);
}
- if (ret == 0 || ret == -EAGAIN)
- ret = RESUME_GUEST;
if (page) {
- /*
- * We drop pages[0] here, not page because page might
- * have been set to the head page of a compound, but
- * we have to drop the reference on the correct tail
- * page to match the get inside gup()
- */
- put_page(pages[0]);
+ if (!ret && (pgflags & _PAGE_WRITE))
+ set_page_dirty_lock(page);
+ put_page(page);
}
+
+ if (ret == 0 || ret == -EAGAIN)
+ ret = RESUME_GUEST;
return ret;
}
continue;
pmd = pmd_offset(pud, 0);
for (im = 0; im < PTRS_PER_PMD; ++im, ++pmd) {
- if (pmd_huge(*pmd)) {
+ if (pmd_is_leaf(*pmd)) {
pmd_clear(pmd);
continue;
}
*/
trace_hardirqs_on();
- guest_enter();
+ guest_enter_irqoff();
srcu_idx = srcu_read_lock(&vc->kvm->srcu);
srcu_read_unlock(&vc->kvm->srcu, srcu_idx);
- guest_exit();
-
trace_hardirqs_off();
set_irq_happened(trap);
kvmppc_set_host_core(pcpu);
local_irq_enable();
+ guest_exit();
/* Let secondaries go back to the offline loop */
for (i = 0; i < controlled_threads; ++i) {
goto up_out;
psize = vma_kernel_pagesize(vma);
- porder = __ilog2(psize);
up_read(¤t->mm->mmap_sem);
/* We can handle 4k, 64k or 16M pages in the VRMA */
- err = -EINVAL;
- if (!(psize == 0x1000 || psize == 0x10000 ||
- psize == 0x1000000))
- goto out_srcu;
+ if (psize >= 0x1000000)
+ psize = 0x1000000;
+ else if (psize >= 0x10000)
+ psize = 0x10000;
+ else
+ psize = 0x1000;
+ porder = __ilog2(psize);
senc = slb_pgsize_encoding(psize);
kvm->arch.vrma_slb_v = senc | SLB_VSID_B_1T |
stw r12, STACK_SLOT_TRAP(r1)
bl kvmhv_commence_exit
nop
- lwz r12, STACK_SLOT_TRAP(r1)
b kvmhv_switch_to_host
/*
secondary_too_late:
li r12, 0
+ stw r12, STACK_SLOT_TRAP(r1)
cmpdi r4, 0
beq 11f
stw r12, VCPU_TRAP(r4)
3: stw r5,VCPU_SLB_MAX(r9)
guest_bypass:
+ stw r12, STACK_SLOT_TRAP(r1)
mr r3, r12
/* Increment exit count, poke other threads to exit */
bl kvmhv_commence_exit
nop
ld r9, HSTATE_KVM_VCPU(r13)
- lwz r12, VCPU_TRAP(r9)
/* Stop others sending VCPU interrupts to this physical CPU */
li r0, -1
* POWER7/POWER8 guest -> host partition switch code.
* We don't have to lock against tlbies but we do
* have to coordinate the hardware threads.
+ * Here STACK_SLOT_TRAP(r1) contains the trap number.
*/
kvmhv_switch_to_host:
/* Secondary threads wait for primary to do partition switch */
END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
/* If HMI, call kvmppc_realmode_hmi_handler() */
+ lwz r12, STACK_SLOT_TRAP(r1)
cmpwi r12, BOOK3S_INTERRUPT_HMI
bne 27f
bl kvmppc_realmode_hmi_handler
nop
cmpdi r3, 0
- li r12, BOOK3S_INTERRUPT_HMI
/*
* At this point kvmppc_realmode_hmi_handler may have resync-ed
* the TB, and if it has, we must not subtract the guest timebase
lwz r8, KVM_SPLIT_DO_RESTORE(r3)
cmpwi r8, 0
beq 47f
- stw r12, STACK_SLOT_TRAP(r1)
bl kvmhv_p9_restore_lpcr
nop
- lwz r12, STACK_SLOT_TRAP(r1)
b 48f
47:
END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300)
li r0, KVM_GUEST_MODE_NONE
stb r0, HSTATE_IN_GUEST(r13)
+ lwz r12, STACK_SLOT_TRAP(r1) /* return trap # in r12 */
ld r0, SFS+PPC_LR_STKOFF(r1)
addi r1, r1, SFS
mtlr r0
int kvmppc_handle_load128_by2x64(struct kvm_run *run, struct kvm_vcpu *vcpu,
unsigned int rt, int is_default_endian)
{
- enum emulation_result emulated;
+ enum emulation_result emulated = EMULATE_DONE;
while (vcpu->arch.mmio_vmx_copy_nums) {
emulated = __kvmppc_handle_load(run, vcpu, rt, 8,
kvm_sigset_deactivate(vcpu);
+#ifdef CONFIG_ALTIVEC
out:
+#endif
vcpu_put(vcpu);
return r;
}
* goto out;
*/
PPC_LWZ(b2p[TMP_REG_1], b2p_bpf_array, offsetof(struct bpf_array, map.max_entries));
+ PPC_RLWINM(b2p_index, b2p_index, 0, 0, 31);
PPC_CMPLW(b2p_index, b2p[TMP_REG_1]);
PPC_BCC(COND_GE, out);
_ASCE_USER_BITS | _ASCE_TYPE_SEGMENT;
/* pgd_alloc() did not account this pmd */
mm_inc_nr_pmds(mm);
+ mm_inc_nr_puds(mm);
}
crst_table_init((unsigned long *) mm->pgd, pgd_entry_type(mm));
return 0;
#include <asm/processor.h>
#include <asm/cache.h>
#include <asm/ctl_reg.h>
+#include <asm/dwarf.h>
#include <asm/errno.h>
#include <asm/ptrace.h>
#include <asm/thread_info.h>
.hidden \name
.type \name,@function
\name:
- .cfi_startproc
+ CFI_STARTPROC
#ifdef CONFIG_HAVE_MARCH_Z10_FEATURES
exrl 0,0f
#else
#endif
j .
0: br \reg
- .cfi_endproc
+ CFI_ENDPROC
.endm
GEN_BR_THUNK __s390x_indirect_jump_r1use_r9,%r9,%r1
UPDATE_VTIME %r8,%r9,__LC_SYNC_ENTER_TIMER
BPENTER __TI_flags(%r12),_TIF_ISOLATE_BP
stmg %r0,%r7,__PT_R0(%r11)
- # clear user controlled register to prevent speculative use
- xgr %r0,%r0
mvc __PT_R8(64,%r11),__LC_SAVE_AREA_SYNC
mvc __PT_PSW(16,%r11),__LC_SVC_OLD_PSW
mvc __PT_INT_CODE(4,%r11),__LC_SVC_ILC
stg %r14,__PT_FLAGS(%r11)
.Lsysc_do_svc:
+ # clear user controlled register to prevent speculative use
+ xgr %r0,%r0
# load address of system call table
lg %r10,__THREAD_sysc_table(%r13,%r12)
llgh %r8,__PT_INT_CODE+2(%r11)
stg %r15,__LC_SYSTEM_TIMER
0: # update accounting time stamp
mvc __LC_LAST_UPDATE_TIMER(8),__LC_SYNC_ENTER_TIMER
+ BPENTER __TI_flags(%r12),_TIF_ISOLATE_BP
# set up saved register r11
lg %r15,__LC_KERNEL_STACK
la %r9,STACK_FRAME_OVERHEAD(%r15)
#include <linux/module.h>
#include <asm/nospec-branch.h>
-int nospec_call_disable = IS_ENABLED(EXPOLINE_OFF);
-int nospec_return_disable = !IS_ENABLED(EXPOLINE_FULL);
+int nospec_call_disable = IS_ENABLED(CONFIG_EXPOLINE_OFF);
+int nospec_return_disable = !IS_ENABLED(CONFIG_EXPOLINE_FULL);
static int __init nospectre_v2_setup_early(char *str)
{
{ "deliver_prefix_signal", VCPU_STAT(deliver_prefix_signal) },
{ "deliver_restart_signal", VCPU_STAT(deliver_restart_signal) },
{ "deliver_program_interruption", VCPU_STAT(deliver_program_int) },
+ { "deliver_io_interrupt", VCPU_STAT(deliver_io_int) },
{ "exit_wait_state", VCPU_STAT(exit_wait_state) },
{ "instruction_epsw", VCPU_STAT(instruction_epsw) },
{ "instruction_gs", VCPU_STAT(instruction_gs) },
/* we still need the basic sca for the ipte control */
vcpu->arch.sie_block->scaoh = (__u32)(((__u64)sca) >> 32);
vcpu->arch.sie_block->scaol = (__u32)(__u64)sca;
+ return;
}
read_lock(&vcpu->kvm->arch.sca_lock);
if (vcpu->kvm->arch.use_esca) {
pte_unmap(pte);
}
-void set_pmd_at(struct mm_struct *mm, unsigned long addr,
- pmd_t *pmdp, pmd_t pmd)
-{
- pmd_t orig = *pmdp;
-
- *pmdp = pmd;
+static void __set_pmd_acct(struct mm_struct *mm, unsigned long addr,
+ pmd_t orig, pmd_t pmd)
+{
if (mm == &init_mm)
return;
}
}
+void set_pmd_at(struct mm_struct *mm, unsigned long addr,
+ pmd_t *pmdp, pmd_t pmd)
+{
+ pmd_t orig = *pmdp;
+
+ *pmdp = pmd;
+ __set_pmd_acct(mm, addr, orig, pmd);
+}
+
static inline pmd_t pmdp_establish(struct vm_area_struct *vma,
unsigned long address, pmd_t *pmdp, pmd_t pmd)
{
do {
old = *pmdp;
} while (cmpxchg64(&pmdp->pmd, old.pmd, pmd.pmd) != old.pmd);
+ __set_pmd_acct(vma->vm_mm, address, old, pmd);
return old;
}
it can be used to assist security vulnerability exploitation.
This setting can be changed at boot time via the kernel command
- line parameter vsyscall=[native|emulate|none].
+ line parameter vsyscall=[emulate|none].
On a system with recent enough glibc (2.14 or newer) and no
static binaries, you can say None without a performance penalty
If unsure, select "Emulate".
- config LEGACY_VSYSCALL_NATIVE
- bool "Native"
- help
- Actual executable code is located in the fixed vsyscall
- address mapping, implementing time() efficiently. Since
- this makes the mapping executable, it can be used during
- security vulnerability exploitation (traditionally as
- ROP gadgets). This configuration is not recommended.
-
config LEGACY_VSYSCALL_EMULATE
bool "Emulate"
help
pushq 2*8(%rdi) /* regs->ip */
pushq 1*8(%rdi) /* regs->orig_ax */
- movq (%rdi), %rdi /* restore %rdi */
-
- pushq %rdi /* pt_regs->di */
+ pushq (%rdi) /* pt_regs->di */
pushq %rsi /* pt_regs->si */
pushq %rdx /* pt_regs->dx */
pushq %rcx /* pt_regs->cx */
TRACE_IRQS_ON
jmp swapgs_restore_regs_and_return_to_usermode
END(entry_INT80_compat)
-
-ENTRY(stub32_clone)
- /*
- * The 32-bit clone ABI is: clone(..., int tls_val, int *child_tidptr).
- * The 64-bit clone ABI is: clone(..., int *child_tidptr, int tls_val).
- *
- * The native 64-bit kernel's sys_clone() implements the latter,
- * so we need to swap arguments here before calling it:
- */
- xchg %r8, %rcx
- jmp sys_clone
-ENDPROC(stub32_clone)
#
0 i386 restart_syscall sys_restart_syscall
1 i386 exit sys_exit
-2 i386 fork sys_fork sys_fork
+2 i386 fork sys_fork
3 i386 read sys_read
4 i386 write sys_write
5 i386 open sys_open compat_sys_open
6 i386 close sys_close
-7 i386 waitpid sys_waitpid sys32_waitpid
+7 i386 waitpid sys_waitpid compat_sys_x86_waitpid
8 i386 creat sys_creat
9 i386 link sys_link
10 i386 unlink sys_unlink
69 i386 ssetmask sys_ssetmask
70 i386 setreuid sys_setreuid16
71 i386 setregid sys_setregid16
-72 i386 sigsuspend sys_sigsuspend sys_sigsuspend
+72 i386 sigsuspend sys_sigsuspend
73 i386 sigpending sys_sigpending compat_sys_sigpending
74 i386 sethostname sys_sethostname
75 i386 setrlimit sys_setrlimit compat_sys_setrlimit
87 i386 swapon sys_swapon
88 i386 reboot sys_reboot
89 i386 readdir sys_old_readdir compat_sys_old_readdir
-90 i386 mmap sys_old_mmap sys32_mmap
+90 i386 mmap sys_old_mmap compat_sys_x86_mmap
91 i386 munmap sys_munmap
92 i386 truncate sys_truncate compat_sys_truncate
93 i386 ftruncate sys_ftruncate compat_sys_ftruncate
117 i386 ipc sys_ipc compat_sys_ipc
118 i386 fsync sys_fsync
119 i386 sigreturn sys_sigreturn sys32_sigreturn
-120 i386 clone sys_clone stub32_clone
+120 i386 clone sys_clone compat_sys_x86_clone
121 i386 setdomainname sys_setdomainname
122 i386 uname sys_newuname
123 i386 modify_ldt sys_modify_ldt
177 i386 rt_sigtimedwait sys_rt_sigtimedwait compat_sys_rt_sigtimedwait
178 i386 rt_sigqueueinfo sys_rt_sigqueueinfo compat_sys_rt_sigqueueinfo
179 i386 rt_sigsuspend sys_rt_sigsuspend
-180 i386 pread64 sys_pread64 sys32_pread
-181 i386 pwrite64 sys_pwrite64 sys32_pwrite
+180 i386 pread64 sys_pread64 compat_sys_x86_pread
+181 i386 pwrite64 sys_pwrite64 compat_sys_x86_pwrite
182 i386 chown sys_chown16
183 i386 getcwd sys_getcwd
184 i386 capget sys_capget
187 i386 sendfile sys_sendfile compat_sys_sendfile
188 i386 getpmsg
189 i386 putpmsg
-190 i386 vfork sys_vfork sys_vfork
+190 i386 vfork sys_vfork
191 i386 ugetrlimit sys_getrlimit compat_sys_getrlimit
192 i386 mmap2 sys_mmap_pgoff
-193 i386 truncate64 sys_truncate64 sys32_truncate64
-194 i386 ftruncate64 sys_ftruncate64 sys32_ftruncate64
-195 i386 stat64 sys_stat64 sys32_stat64
-196 i386 lstat64 sys_lstat64 sys32_lstat64
-197 i386 fstat64 sys_fstat64 sys32_fstat64
+193 i386 truncate64 sys_truncate64 compat_sys_x86_truncate64
+194 i386 ftruncate64 sys_ftruncate64 compat_sys_x86_ftruncate64
+195 i386 stat64 sys_stat64 compat_sys_x86_stat64
+196 i386 lstat64 sys_lstat64 compat_sys_x86_lstat64
+197 i386 fstat64 sys_fstat64 compat_sys_x86_fstat64
198 i386 lchown32 sys_lchown
199 i386 getuid32 sys_getuid
200 i386 getgid32 sys_getgid
# 222 is unused
# 223 is unused
224 i386 gettid sys_gettid
-225 i386 readahead sys_readahead sys32_readahead
+225 i386 readahead sys_readahead compat_sys_x86_readahead
226 i386 setxattr sys_setxattr
227 i386 lsetxattr sys_lsetxattr
228 i386 fsetxattr sys_fsetxattr
247 i386 io_getevents sys_io_getevents compat_sys_io_getevents
248 i386 io_submit sys_io_submit compat_sys_io_submit
249 i386 io_cancel sys_io_cancel
-250 i386 fadvise64 sys_fadvise64 sys32_fadvise64
+250 i386 fadvise64 sys_fadvise64 compat_sys_x86_fadvise64
# 251 is available for reuse (was briefly sys_set_zone_reclaim)
252 i386 exit_group sys_exit_group
253 i386 lookup_dcookie sys_lookup_dcookie compat_sys_lookup_dcookie
269 i386 fstatfs64 sys_fstatfs64 compat_sys_fstatfs64
270 i386 tgkill sys_tgkill
271 i386 utimes sys_utimes compat_sys_utimes
-272 i386 fadvise64_64 sys_fadvise64_64 sys32_fadvise64_64
+272 i386 fadvise64_64 sys_fadvise64_64 compat_sys_x86_fadvise64_64
273 i386 vserver
274 i386 mbind sys_mbind
275 i386 get_mempolicy sys_get_mempolicy compat_sys_get_mempolicy
297 i386 mknodat sys_mknodat
298 i386 fchownat sys_fchownat
299 i386 futimesat sys_futimesat compat_sys_futimesat
-300 i386 fstatat64 sys_fstatat64 sys32_fstatat
+300 i386 fstatat64 sys_fstatat64 compat_sys_x86_fstatat
301 i386 unlinkat sys_unlinkat
302 i386 renameat sys_renameat
303 i386 linkat sys_linkat
311 i386 set_robust_list sys_set_robust_list compat_sys_set_robust_list
312 i386 get_robust_list sys_get_robust_list compat_sys_get_robust_list
313 i386 splice sys_splice
-314 i386 sync_file_range sys_sync_file_range sys32_sync_file_range
+314 i386 sync_file_range sys_sync_file_range compat_sys_x86_sync_file_range
315 i386 tee sys_tee
316 i386 vmsplice sys_vmsplice compat_sys_vmsplice
317 i386 move_pages sys_move_pages compat_sys_move_pages
321 i386 signalfd sys_signalfd compat_sys_signalfd
322 i386 timerfd_create sys_timerfd_create
323 i386 eventfd sys_eventfd
-324 i386 fallocate sys_fallocate sys32_fallocate
+324 i386 fallocate sys_fallocate compat_sys_x86_fallocate
325 i386 timerfd_settime sys_timerfd_settime compat_sys_timerfd_settime
326 i386 timerfd_gettime sys_timerfd_gettime compat_sys_timerfd_gettime
327 i386 signalfd4 sys_signalfd4 compat_sys_signalfd4
#define CREATE_TRACE_POINTS
#include "vsyscall_trace.h"
-static enum { EMULATE, NATIVE, NONE } vsyscall_mode =
-#if defined(CONFIG_LEGACY_VSYSCALL_NATIVE)
- NATIVE;
-#elif defined(CONFIG_LEGACY_VSYSCALL_NONE)
+static enum { EMULATE, NONE } vsyscall_mode =
+#ifdef CONFIG_LEGACY_VSYSCALL_NONE
NONE;
#else
EMULATE;
if (str) {
if (!strcmp("emulate", str))
vsyscall_mode = EMULATE;
- else if (!strcmp("native", str))
- vsyscall_mode = NATIVE;
else if (!strcmp("none", str))
vsyscall_mode = NONE;
else
WARN_ON_ONCE(address != regs->ip);
- /* This should be unreachable in NATIVE mode. */
- if (WARN_ON(vsyscall_mode == NATIVE))
- return false;
-
if (vsyscall_mode == NONE) {
warn_bad_vsyscall(KERN_INFO, regs,
"vsyscall attempted with vsyscall=none");
if (vsyscall_mode != NONE) {
__set_fixmap(VSYSCALL_PAGE, physaddr_vsyscall,
- vsyscall_mode == NATIVE
- ? PAGE_KERNEL_VSYSCALL
- : PAGE_KERNEL_VVAR);
+ PAGE_KERNEL_VVAR);
set_vsyscall_pgtable_user_bits(swapper_pg_dir);
}
};
static struct attribute *skx_upi_uncore_formats_attr[] = {
- &format_attr_event_ext.attr,
+ &format_attr_event.attr,
&format_attr_umask_ext.attr,
&format_attr_edge.attr,
&format_attr_inv.attr,
#define AA(__x) ((unsigned long)(__x))
-asmlinkage long sys32_truncate64(const char __user *filename,
- unsigned long offset_low,
- unsigned long offset_high)
+COMPAT_SYSCALL_DEFINE3(x86_truncate64, const char __user *, filename,
+ unsigned long, offset_low, unsigned long, offset_high)
{
return sys_truncate(filename, ((loff_t) offset_high << 32) | offset_low);
}
-asmlinkage long sys32_ftruncate64(unsigned int fd, unsigned long offset_low,
- unsigned long offset_high)
+COMPAT_SYSCALL_DEFINE3(x86_ftruncate64, unsigned int, fd,
+ unsigned long, offset_low, unsigned long, offset_high)
{
return sys_ftruncate(fd, ((loff_t) offset_high << 32) | offset_low);
}
return 0;
}
-asmlinkage long sys32_stat64(const char __user *filename,
- struct stat64 __user *statbuf)
+COMPAT_SYSCALL_DEFINE2(x86_stat64, const char __user *, filename,
+ struct stat64 __user *, statbuf)
{
struct kstat stat;
int ret = vfs_stat(filename, &stat);
return ret;
}
-asmlinkage long sys32_lstat64(const char __user *filename,
- struct stat64 __user *statbuf)
+COMPAT_SYSCALL_DEFINE2(x86_lstat64, const char __user *, filename,
+ struct stat64 __user *, statbuf)
{
struct kstat stat;
int ret = vfs_lstat(filename, &stat);
return ret;
}
-asmlinkage long sys32_fstat64(unsigned int fd, struct stat64 __user *statbuf)
+COMPAT_SYSCALL_DEFINE2(x86_fstat64, unsigned int, fd,
+ struct stat64 __user *, statbuf)
{
struct kstat stat;
int ret = vfs_fstat(fd, &stat);
return ret;
}
-asmlinkage long sys32_fstatat(unsigned int dfd, const char __user *filename,
- struct stat64 __user *statbuf, int flag)
+COMPAT_SYSCALL_DEFINE4(x86_fstatat, unsigned int, dfd,
+ const char __user *, filename,
+ struct stat64 __user *, statbuf, int, flag)
{
struct kstat stat;
int error;
unsigned int offset;
};
-asmlinkage long sys32_mmap(struct mmap_arg_struct32 __user *arg)
+COMPAT_SYSCALL_DEFINE1(x86_mmap, struct mmap_arg_struct32 __user *, arg)
{
struct mmap_arg_struct32 a;
a.offset>>PAGE_SHIFT);
}
-asmlinkage long sys32_waitpid(compat_pid_t pid, unsigned int __user *stat_addr,
- int options)
+COMPAT_SYSCALL_DEFINE3(x86_waitpid, compat_pid_t, pid, unsigned int __user *,
+ stat_addr, int, options)
{
return compat_sys_wait4(pid, stat_addr, options, NULL);
}
/* warning: next two assume little endian */
-asmlinkage long sys32_pread(unsigned int fd, char __user *ubuf, u32 count,
- u32 poslo, u32 poshi)
+COMPAT_SYSCALL_DEFINE5(x86_pread, unsigned int, fd, char __user *, ubuf,
+ u32, count, u32, poslo, u32, poshi)
{
return sys_pread64(fd, ubuf, count,
((loff_t)AA(poshi) << 32) | AA(poslo));
}
-asmlinkage long sys32_pwrite(unsigned int fd, const char __user *ubuf,
- u32 count, u32 poslo, u32 poshi)
+COMPAT_SYSCALL_DEFINE5(x86_pwrite, unsigned int, fd, const char __user *, ubuf,
+ u32, count, u32, poslo, u32, poshi)
{
return sys_pwrite64(fd, ubuf, count,
((loff_t)AA(poshi) << 32) | AA(poslo));
* Some system calls that need sign extended arguments. This could be
* done by a generic wrapper.
*/
-long sys32_fadvise64_64(int fd, __u32 offset_low, __u32 offset_high,
- __u32 len_low, __u32 len_high, int advice)
+COMPAT_SYSCALL_DEFINE6(x86_fadvise64_64, int, fd, __u32, offset_low,
+ __u32, offset_high, __u32, len_low, __u32, len_high,
+ int, advice)
{
return sys_fadvise64_64(fd,
(((u64)offset_high)<<32) | offset_low,
advice);
}
-asmlinkage ssize_t sys32_readahead(int fd, unsigned off_lo, unsigned off_hi,
- size_t count)
+COMPAT_SYSCALL_DEFINE4(x86_readahead, int, fd, unsigned int, off_lo,
+ unsigned int, off_hi, size_t, count)
{
return sys_readahead(fd, ((u64)off_hi << 32) | off_lo, count);
}
-asmlinkage long sys32_sync_file_range(int fd, unsigned off_low, unsigned off_hi,
- unsigned n_low, unsigned n_hi, int flags)
+COMPAT_SYSCALL_DEFINE6(x86_sync_file_range, int, fd, unsigned int, off_low,
+ unsigned int, off_hi, unsigned int, n_low,
+ unsigned int, n_hi, int, flags)
{
return sys_sync_file_range(fd,
((u64)off_hi << 32) | off_low,
((u64)n_hi << 32) | n_low, flags);
}
-asmlinkage long sys32_fadvise64(int fd, unsigned offset_lo, unsigned offset_hi,
- size_t len, int advice)
+COMPAT_SYSCALL_DEFINE5(x86_fadvise64, int, fd, unsigned int, offset_lo,
+ unsigned int, offset_hi, size_t, len, int, advice)
{
return sys_fadvise64_64(fd, ((u64)offset_hi << 32) | offset_lo,
len, advice);
}
-asmlinkage long sys32_fallocate(int fd, int mode, unsigned offset_lo,
- unsigned offset_hi, unsigned len_lo,
- unsigned len_hi)
+COMPAT_SYSCALL_DEFINE6(x86_fallocate, int, fd, int, mode,
+ unsigned int, offset_lo, unsigned int, offset_hi,
+ unsigned int, len_lo, unsigned int, len_hi)
{
return sys_fallocate(fd, mode, ((u64)offset_hi << 32) | offset_lo,
((u64)len_hi << 32) | len_lo);
}
+
+/*
+ * The 32-bit clone ABI is CONFIG_CLONE_BACKWARDS
+ */
+COMPAT_SYSCALL_DEFINE5(x86_clone, unsigned long, clone_flags,
+ unsigned long, newsp, int __user *, parent_tidptr,
+ unsigned long, tls_val, int __user *, child_tidptr)
+{
+ return sys_clone(clone_flags, newsp, parent_tidptr, child_tidptr,
+ tls_val);
+}
#define X86_FEATURE_VPCLMULQDQ (16*32+10) /* Carry-Less Multiplication Double Quadword */
#define X86_FEATURE_AVX512_VNNI (16*32+11) /* Vector Neural Network Instructions */
#define X86_FEATURE_AVX512_BITALG (16*32+12) /* Support for VPOPCNT[B,W] and VPSHUF-BITQMB instructions */
+#define X86_FEATURE_TME (16*32+13) /* Intel Total Memory Encryption */
#define X86_FEATURE_AVX512_VPOPCNTDQ (16*32+14) /* POPCNT for vectors of DW/QW */
#define X86_FEATURE_LA57 (16*32+16) /* 5-level page tables */
#define X86_FEATURE_RDPID (16*32+22) /* RDPID instruction */
/* Intel-defined CPU features, CPUID level 0x00000007:0 (EDX), word 18 */
#define X86_FEATURE_AVX512_4VNNIW (18*32+ 2) /* AVX-512 Neural Network Instructions */
#define X86_FEATURE_AVX512_4FMAPS (18*32+ 3) /* AVX-512 Multiply Accumulation Single precision */
+#define X86_FEATURE_PCONFIG (18*32+18) /* Intel PCONFIG */
#define X86_FEATURE_SPEC_CTRL (18*32+26) /* "" Speculation Control (IBRS + IBPB) */
#define X86_FEATURE_INTEL_STIBP (18*32+27) /* "" Single Thread Indirect Branch Predictors */
#define X86_FEATURE_ARCH_CAPABILITIES (18*32+29) /* IA32_ARCH_CAPABILITIES MSR (Intel) */
enum ucode_state {
UCODE_OK = 0,
+ UCODE_NEW,
UCODE_UPDATED,
UCODE_NFOUND,
UCODE_ERROR,
* otherwise we'll run out of registers. We don't care about CET
* here, anyway.
*/
-# define CALL_NOSPEC ALTERNATIVE("call *%[thunk_target]\n", \
+# define CALL_NOSPEC \
+ ALTERNATIVE( \
+ ANNOTATE_RETPOLINE_SAFE \
+ "call *%[thunk_target]\n", \
" jmp 904f;\n" \
" .align 16\n" \
"901: call 903f;\n" \
#define __PAGE_KERNEL_RO (__PAGE_KERNEL & ~_PAGE_RW)
#define __PAGE_KERNEL_RX (__PAGE_KERNEL_EXEC & ~_PAGE_RW)
#define __PAGE_KERNEL_NOCACHE (__PAGE_KERNEL | _PAGE_NOCACHE)
-#define __PAGE_KERNEL_VSYSCALL (__PAGE_KERNEL_RX | _PAGE_USER)
#define __PAGE_KERNEL_VVAR (__PAGE_KERNEL_RO | _PAGE_USER)
#define __PAGE_KERNEL_LARGE (__PAGE_KERNEL | _PAGE_PSE)
#define __PAGE_KERNEL_LARGE_EXEC (__PAGE_KERNEL_EXEC | _PAGE_PSE)
#define PAGE_KERNEL_NOCACHE __pgprot(__PAGE_KERNEL_NOCACHE | _PAGE_ENC)
#define PAGE_KERNEL_LARGE __pgprot(__PAGE_KERNEL_LARGE | _PAGE_ENC)
#define PAGE_KERNEL_LARGE_EXEC __pgprot(__PAGE_KERNEL_LARGE_EXEC | _PAGE_ENC)
-#define PAGE_KERNEL_VSYSCALL __pgprot(__PAGE_KERNEL_VSYSCALL | _PAGE_ENC)
#define PAGE_KERNEL_VVAR __pgprot(__PAGE_KERNEL_VVAR | _PAGE_ENC)
#define PAGE_KERNEL_IO __pgprot(__PAGE_KERNEL_IO)
#if defined(CONFIG_X86_64)
extern char __end_rodata_hpage_align[];
+extern char __entry_trampoline_start[], __entry_trampoline_end[];
#endif
#endif /* _ASM_X86_SECTIONS_H */
#include <asm/ia32.h>
/* ia32/sys_ia32.c */
-asmlinkage long sys32_truncate64(const char __user *, unsigned long, unsigned long);
-asmlinkage long sys32_ftruncate64(unsigned int, unsigned long, unsigned long);
+asmlinkage long compat_sys_x86_truncate64(const char __user *, unsigned long,
+ unsigned long);
+asmlinkage long compat_sys_x86_ftruncate64(unsigned int, unsigned long,
+ unsigned long);
-asmlinkage long sys32_stat64(const char __user *, struct stat64 __user *);
-asmlinkage long sys32_lstat64(const char __user *, struct stat64 __user *);
-asmlinkage long sys32_fstat64(unsigned int, struct stat64 __user *);
-asmlinkage long sys32_fstatat(unsigned int, const char __user *,
+asmlinkage long compat_sys_x86_stat64(const char __user *,
+ struct stat64 __user *);
+asmlinkage long compat_sys_x86_lstat64(const char __user *,
+ struct stat64 __user *);
+asmlinkage long compat_sys_x86_fstat64(unsigned int, struct stat64 __user *);
+asmlinkage long compat_sys_x86_fstatat(unsigned int, const char __user *,
struct stat64 __user *, int);
struct mmap_arg_struct32;
-asmlinkage long sys32_mmap(struct mmap_arg_struct32 __user *);
+asmlinkage long compat_sys_x86_mmap(struct mmap_arg_struct32 __user *);
-asmlinkage long sys32_waitpid(compat_pid_t, unsigned int __user *, int);
+asmlinkage long compat_sys_x86_waitpid(compat_pid_t, unsigned int __user *,
+ int);
-asmlinkage long sys32_pread(unsigned int, char __user *, u32, u32, u32);
-asmlinkage long sys32_pwrite(unsigned int, const char __user *, u32, u32, u32);
+asmlinkage long compat_sys_x86_pread(unsigned int, char __user *, u32, u32,
+ u32);
+asmlinkage long compat_sys_x86_pwrite(unsigned int, const char __user *, u32,
+ u32, u32);
-long sys32_fadvise64_64(int, __u32, __u32, __u32, __u32, int);
-long sys32_vm86_warning(void);
+asmlinkage long compat_sys_x86_fadvise64_64(int, __u32, __u32, __u32, __u32,
+ int);
-asmlinkage ssize_t sys32_readahead(int, unsigned, unsigned, size_t);
-asmlinkage long sys32_sync_file_range(int, unsigned, unsigned,
- unsigned, unsigned, int);
-asmlinkage long sys32_fadvise64(int, unsigned, unsigned, size_t, int);
-asmlinkage long sys32_fallocate(int, int, unsigned,
- unsigned, unsigned, unsigned);
+asmlinkage ssize_t compat_sys_x86_readahead(int, unsigned int, unsigned int,
+ size_t);
+asmlinkage long compat_sys_x86_sync_file_range(int, unsigned int, unsigned int,
+ unsigned int, unsigned int,
+ int);
+asmlinkage long compat_sys_x86_fadvise64(int, unsigned int, unsigned int,
+ size_t, int);
+asmlinkage long compat_sys_x86_fallocate(int, int, unsigned int, unsigned int,
+ unsigned int, unsigned int);
+asmlinkage long compat_sys_x86_clone(unsigned long, unsigned long, int __user *,
+ unsigned long, int __user *);
/* ia32/ia32_signal.c */
asmlinkage long sys32_sigreturn(void);
#define INTR_TYPE_NMI_INTR (2 << 8) /* NMI */
#define INTR_TYPE_HARD_EXCEPTION (3 << 8) /* processor exception */
#define INTR_TYPE_SOFT_INTR (4 << 8) /* software interrupt */
+#define INTR_TYPE_PRIV_SW_EXCEPTION (5 << 8) /* ICE breakpoint - undocumented */
#define INTR_TYPE_SOFT_EXCEPTION (6 << 8) /* software exception */
/* GUEST_INTERRUPTIBILITY_INFO flags. */
__u64 synd; /* MCA_SYND MSR: only valid on SMCA systems */
__u64 ipid; /* MCA_IPID MSR: only valid on SMCA systems */
__u64 ppin; /* Protected Processor Inventory Number */
+ __u32 microcode;/* Microcode revision */
};
#define MCE_GET_RECORD_LEN _IOR('M', 1, int)
/*
* Early microcode releases for the Spectre v2 mitigation were broken.
* Information taken from;
- * - https://newsroom.intel.com/wp-content/uploads/sites/11/2018/01/microcode-update-guidance.pdf
+ * - https://newsroom.intel.com/wp-content/uploads/sites/11/2018/03/microcode-update-guidance.pdf
* - https://kb.vmware.com/s/article/52345
* - Microcode revisions observed in the wild
* - Release note from 20180108 microcode release
{ INTEL_FAM6_KABYLAKE_MOBILE, 0x09, 0x80 },
{ INTEL_FAM6_SKYLAKE_X, 0x03, 0x0100013e },
{ INTEL_FAM6_SKYLAKE_X, 0x04, 0x0200003c },
- { INTEL_FAM6_SKYLAKE_DESKTOP, 0x03, 0xc2 },
{ INTEL_FAM6_BROADWELL_CORE, 0x04, 0x28 },
{ INTEL_FAM6_BROADWELL_GT3E, 0x01, 0x1b },
{ INTEL_FAM6_BROADWELL_XEON_D, 0x02, 0x14 },
{
int i;
+ /*
+ * We know that the hypervisor lie to us on the microcode version so
+ * we may as well hope that it is running the correct version.
+ */
+ if (cpu_has(c, X86_FEATURE_HYPERVISOR))
+ return false;
+
for (i = 0; i < ARRAY_SIZE(spectre_bad_microcodes); i++) {
if (c->x86_model == spectre_bad_microcodes[i].model &&
c->x86_stepping == spectre_bad_microcodes[i].stepping)
static DEFINE_MUTEX(mce_log_mutex);
+/* sysfs synchronization */
+static DEFINE_MUTEX(mce_sysfs_mutex);
+
#define CREATE_TRACE_POINTS
#include <trace/events/mce.h>
if (this_cpu_has(X86_FEATURE_INTEL_PPIN))
rdmsrl(MSR_PPIN, m->ppin);
+
+ m->microcode = boot_cpu_data.microcode;
}
DEFINE_PER_CPU(struct mce, injectm);
*/
pr_emerg(HW_ERR "PROCESSOR %u:%x TIME %llu SOCKET %u APIC %x microcode %x\n",
m->cpuvendor, m->cpuid, m->time, m->socketid, m->apicid,
- cpu_data(m->extcpu).microcode);
+ m->microcode);
}
static void print_mce(struct mce *m)
if (kstrtou64(buf, 0, &new) < 0)
return -EINVAL;
+ mutex_lock(&mce_sysfs_mutex);
if (mca_cfg.ignore_ce ^ !!new) {
if (new) {
/* disable ce features */
on_each_cpu(mce_enable_ce, (void *)1, 1);
}
}
+ mutex_unlock(&mce_sysfs_mutex);
+
return size;
}
if (kstrtou64(buf, 0, &new) < 0)
return -EINVAL;
+ mutex_lock(&mce_sysfs_mutex);
if (mca_cfg.cmci_disabled ^ !!new) {
if (new) {
/* disable cmci */
on_each_cpu(mce_enable_ce, NULL, 1);
}
}
+ mutex_unlock(&mce_sysfs_mutex);
+
return size;
}
struct device_attribute *attr,
const char *buf, size_t size)
{
- ssize_t ret = device_store_int(s, attr, buf, size);
+ unsigned long old_check_interval = check_interval;
+ ssize_t ret = device_store_ulong(s, attr, buf, size);
+
+ if (check_interval == old_check_interval)
+ return ret;
+
+ if (check_interval < 1)
+ check_interval = 1;
+
+ mutex_lock(&mce_sysfs_mutex);
mce_restart();
+ mutex_unlock(&mce_sysfs_mutex);
+
return ret;
}
return -EINVAL;
ret = load_microcode_amd(true, x86_family(cpuid_1_eax), desc.data, desc.size);
- if (ret != UCODE_OK)
+ if (ret > UCODE_UPDATED)
return -EINVAL;
return 0;
static enum ucode_state
load_microcode_amd(bool save, u8 family, const u8 *data, size_t size)
{
+ struct ucode_patch *p;
enum ucode_state ret;
/* free old equiv table */
free_equiv_cpu_table();
ret = __load_microcode_amd(family, data, size);
-
- if (ret != UCODE_OK)
+ if (ret != UCODE_OK) {
cleanup();
+ return ret;
+ }
-#ifdef CONFIG_X86_32
- /* save BSP's matching patch for early load */
- if (save) {
- struct ucode_patch *p = find_patch(0);
- if (p) {
- memset(amd_ucode_patch, 0, PATCH_MAX_SIZE);
- memcpy(amd_ucode_patch, p->data, min_t(u32, ksize(p->data),
- PATCH_MAX_SIZE));
- }
+ p = find_patch(0);
+ if (!p) {
+ return ret;
+ } else {
+ if (boot_cpu_data.microcode == p->patch_id)
+ return ret;
+
+ ret = UCODE_NEW;
}
-#endif
+
+ /* save BSP's matching patch for early load */
+ if (!save)
+ return ret;
+
+ memset(amd_ucode_patch, 0, PATCH_MAX_SIZE);
+ memcpy(amd_ucode_patch, p->data, min_t(u32, ksize(p->data), PATCH_MAX_SIZE));
+
return ret;
}
#define pr_fmt(fmt) "microcode: " fmt
#include <linux/platform_device.h>
+#include <linux/stop_machine.h>
#include <linux/syscore_ops.h>
#include <linux/miscdevice.h>
#include <linux/capability.h>
#include <linux/firmware.h>
#include <linux/kernel.h>
+#include <linux/delay.h>
#include <linux/mutex.h>
#include <linux/cpu.h>
+#include <linux/nmi.h>
#include <linux/fs.h>
#include <linux/mm.h>
*/
static DEFINE_MUTEX(microcode_mutex);
+/*
+ * Serialize late loading so that CPUs get updated one-by-one.
+ */
+static DEFINE_SPINLOCK(update_lock);
+
struct ucode_cpu_info ucode_cpu_info[NR_CPUS];
struct cpu_info_ctx {
return ret;
}
-struct apply_microcode_ctx {
- enum ucode_state err;
-};
-
static void apply_microcode_local(void *arg)
{
- struct apply_microcode_ctx *ctx = arg;
+ enum ucode_state *err = arg;
- ctx->err = microcode_ops->apply_microcode(smp_processor_id());
+ *err = microcode_ops->apply_microcode(smp_processor_id());
}
static int apply_microcode_on_target(int cpu)
{
- struct apply_microcode_ctx ctx = { .err = 0 };
+ enum ucode_state err;
int ret;
- ret = smp_call_function_single(cpu, apply_microcode_local, &ctx, 1);
- if (!ret)
- ret = ctx.err;
-
+ ret = smp_call_function_single(cpu, apply_microcode_local, &err, 1);
+ if (!ret) {
+ if (err == UCODE_ERROR)
+ ret = 1;
+ }
return ret;
}
/* fake device for request_firmware */
static struct platform_device *microcode_pdev;
-static enum ucode_state reload_for_cpu(int cpu)
+/*
+ * Late loading dance. Why the heavy-handed stomp_machine effort?
+ *
+ * - HT siblings must be idle and not execute other code while the other sibling
+ * is loading microcode in order to avoid any negative interactions caused by
+ * the loading.
+ *
+ * - In addition, microcode update on the cores must be serialized until this
+ * requirement can be relaxed in the future. Right now, this is conservative
+ * and good.
+ */
+#define SPINUNIT 100 /* 100 nsec */
+
+static int check_online_cpus(void)
{
- struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
- enum ucode_state ustate;
+ if (num_online_cpus() == num_present_cpus())
+ return 0;
- if (!uci->valid)
- return UCODE_OK;
+ pr_err("Not all CPUs online, aborting microcode update.\n");
+
+ return -EINVAL;
+}
+
+static atomic_t late_cpus_in;
+static atomic_t late_cpus_out;
+
+static int __wait_for_cpus(atomic_t *t, long long timeout)
+{
+ int all_cpus = num_online_cpus();
+
+ atomic_inc(t);
- ustate = microcode_ops->request_microcode_fw(cpu, µcode_pdev->dev, true);
- if (ustate != UCODE_OK)
- return ustate;
+ while (atomic_read(t) < all_cpus) {
+ if (timeout < SPINUNIT) {
+ pr_err("Timeout while waiting for CPUs rendezvous, remaining: %d\n",
+ all_cpus - atomic_read(t));
+ return 1;
+ }
- return apply_microcode_on_target(cpu);
+ ndelay(SPINUNIT);
+ timeout -= SPINUNIT;
+
+ touch_nmi_watchdog();
+ }
+ return 0;
+}
+
+/*
+ * Returns:
+ * < 0 - on error
+ * 0 - no update done
+ * 1 - microcode was updated
+ */
+static int __reload_late(void *info)
+{
+ int cpu = smp_processor_id();
+ enum ucode_state err;
+ int ret = 0;
+
+ /*
+ * Wait for all CPUs to arrive. A load will not be attempted unless all
+ * CPUs show up.
+ * */
+ if (__wait_for_cpus(&late_cpus_in, NSEC_PER_SEC))
+ return -1;
+
+ spin_lock(&update_lock);
+ apply_microcode_local(&err);
+ spin_unlock(&update_lock);
+
+ if (err > UCODE_NFOUND) {
+ pr_warn("Error reloading microcode on CPU %d\n", cpu);
+ return -1;
+ /* siblings return UCODE_OK because their engine got updated already */
+ } else if (err == UCODE_UPDATED || err == UCODE_OK) {
+ ret = 1;
+ } else {
+ return ret;
+ }
+
+ /*
+ * Increase the wait timeout to a safe value here since we're
+ * serializing the microcode update and that could take a while on a
+ * large number of CPUs. And that is fine as the *actual* timeout will
+ * be determined by the last CPU finished updating and thus cut short.
+ */
+ if (__wait_for_cpus(&late_cpus_out, NSEC_PER_SEC * num_online_cpus()))
+ panic("Timeout during microcode update!\n");
+
+ return ret;
+}
+
+/*
+ * Reload microcode late on all CPUs. Wait for a sec until they
+ * all gather together.
+ */
+static int microcode_reload_late(void)
+{
+ int ret;
+
+ atomic_set(&late_cpus_in, 0);
+ atomic_set(&late_cpus_out, 0);
+
+ ret = stop_machine_cpuslocked(__reload_late, NULL, cpu_online_mask);
+ if (ret > 0)
+ microcode_check();
+
+ return ret;
}
static ssize_t reload_store(struct device *dev,
const char *buf, size_t size)
{
enum ucode_state tmp_ret = UCODE_OK;
- bool do_callback = false;
+ int bsp = boot_cpu_data.cpu_index;
unsigned long val;
ssize_t ret = 0;
- int cpu;
ret = kstrtoul(buf, 0, &val);
if (ret)
if (val != 1)
return size;
- get_online_cpus();
- mutex_lock(µcode_mutex);
- for_each_online_cpu(cpu) {
- tmp_ret = reload_for_cpu(cpu);
- if (tmp_ret > UCODE_NFOUND) {
- pr_warn("Error reloading microcode on CPU %d\n", cpu);
-
- /* set retval for the first encountered reload error */
- if (!ret)
- ret = -EINVAL;
- }
+ tmp_ret = microcode_ops->request_microcode_fw(bsp, µcode_pdev->dev, true);
+ if (tmp_ret != UCODE_NEW)
+ return size;
- if (tmp_ret == UCODE_UPDATED)
- do_callback = true;
- }
+ get_online_cpus();
- if (!ret && do_callback)
- microcode_check();
+ ret = check_online_cpus();
+ if (ret)
+ goto put;
+ mutex_lock(µcode_mutex);
+ ret = microcode_reload_late();
mutex_unlock(µcode_mutex);
+
+put:
put_online_cpus();
- if (!ret)
+ if (ret >= 0)
ret = size;
return ret;
if (system_state != SYSTEM_RUNNING)
return UCODE_NFOUND;
- ustate = microcode_ops->request_microcode_fw(cpu, µcode_pdev->dev,
- refresh_fw);
-
- if (ustate == UCODE_OK) {
+ ustate = microcode_ops->request_microcode_fw(cpu, µcode_pdev->dev, refresh_fw);
+ if (ustate == UCODE_NEW) {
pr_debug("CPU%d updated upon init\n", cpu);
apply_microcode_on_target(cpu);
}
if (!mc)
return 0;
+ /*
+ * Save us the MSR write below - which is a particular expensive
+ * operation - when the other hyperthread has updated the microcode
+ * already.
+ */
+ rev = intel_get_microcode_revision();
+ if (rev >= mc->hdr.rev) {
+ uci->cpu_sig.rev = rev;
+ return UCODE_OK;
+ }
+
+ /*
+ * Writeback and invalidate caches before updating microcode to avoid
+ * internal issues depending on what the microcode is updating.
+ */
+ native_wbinvd();
+
/* write microcode via MSR 0x79 */
native_wrmsrl(MSR_IA32_UCODE_WRITE, (unsigned long)mc->bits);
static enum ucode_state apply_microcode_intel(int cpu)
{
+ struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+ struct cpuinfo_x86 *c = &cpu_data(cpu);
struct microcode_intel *mc;
- struct ucode_cpu_info *uci;
- struct cpuinfo_x86 *c;
static int prev_rev;
u32 rev;
if (WARN_ON(raw_smp_processor_id() != cpu))
return UCODE_ERROR;
- uci = ucode_cpu_info + cpu;
- mc = uci->mc;
+ /* Look for a newer patch in our cache: */
+ mc = find_patch(uci);
if (!mc) {
- /* Look for a newer patch in our cache: */
- mc = find_patch(uci);
+ mc = uci->mc;
if (!mc)
return UCODE_NFOUND;
}
+ /*
+ * Save us the MSR write below - which is a particular expensive
+ * operation - when the other hyperthread has updated the microcode
+ * already.
+ */
+ rev = intel_get_microcode_revision();
+ if (rev >= mc->hdr.rev) {
+ uci->cpu_sig.rev = rev;
+ c->microcode = rev;
+ return UCODE_OK;
+ }
+
+ /*
+ * Writeback and invalidate caches before updating microcode to avoid
+ * internal issues depending on what the microcode is updating.
+ */
+ native_wbinvd();
+
/* write microcode via MSR 0x79 */
wrmsrl(MSR_IA32_UCODE_WRITE, (unsigned long)mc->bits);
prev_rev = rev;
}
- c = &cpu_data(cpu);
-
uci->cpu_sig.rev = rev;
c->microcode = rev;
unsigned int leftover = size;
unsigned int curr_mc_size = 0, new_mc_size = 0;
unsigned int csig, cpf;
+ enum ucode_state ret = UCODE_OK;
while (leftover) {
struct microcode_header_intel mc_header;
new_mc = mc;
new_mc_size = mc_size;
mc = NULL; /* trigger new vmalloc */
+ ret = UCODE_NEW;
}
ucode_ptr += mc_size;
pr_debug("CPU%d found a matching microcode update with version 0x%x (current=0x%x)\n",
cpu, new_rev, uci->cpu_sig.rev);
- return UCODE_OK;
+ return ret;
}
static int get_ucode_fw(void *to, const void *from, size_t n)
/*
* this changes the io permissions bitmap in the current task.
*/
-asmlinkage long sys_ioperm(unsigned long from, unsigned long num, int turn_on)
+SYSCALL_DEFINE3(ioperm, unsigned long, from, unsigned long, num, int, turn_on)
{
struct thread_struct *t = ¤t->thread;
struct tss_struct *tss;
bool arch_within_kprobe_blacklist(unsigned long addr)
{
+ bool is_in_entry_trampoline_section = false;
+
+#ifdef CONFIG_X86_64
+ is_in_entry_trampoline_section =
+ (addr >= (unsigned long)__entry_trampoline_start &&
+ addr < (unsigned long)__entry_trampoline_end);
+#endif
return (addr >= (unsigned long)__kprobes_text_start &&
addr < (unsigned long)__kprobes_text_end) ||
(addr >= (unsigned long)__entry_text_start &&
- addr < (unsigned long)__entry_text_end);
+ addr < (unsigned long)__entry_text_end) ||
+ is_in_entry_trampoline_section;
}
int __init arch_init_kprobes(void)
BUILD_BUG_ON(offsetof(compat_siginfo_t, _sifields) != 3 * sizeof(int));
#define CHECK_CSI_OFFSET(name) BUILD_BUG_ON(_sifields_offset != offsetof(compat_siginfo_t, _sifields.name))
+ BUILD_BUG_ON(offsetof(siginfo_t, si_signo) != 0);
+ BUILD_BUG_ON(offsetof(siginfo_t, si_errno) != 4);
+ BUILD_BUG_ON(offsetof(siginfo_t, si_code) != 8);
+
+ BUILD_BUG_ON(offsetof(compat_siginfo_t, si_signo) != 0);
+ BUILD_BUG_ON(offsetof(compat_siginfo_t, si_errno) != 4);
+ BUILD_BUG_ON(offsetof(compat_siginfo_t, si_code) != 8);
/*
* Ensure that the size of each si_field never changes.
* If it does, it is a sign that the
CHECK_CSI_SIZE (_kill, 2*sizeof(int));
CHECK_SI_SIZE (_kill, 2*sizeof(int));
+ BUILD_BUG_ON(offsetof(siginfo_t, si_pid) != 0x10);
+ BUILD_BUG_ON(offsetof(siginfo_t, si_uid) != 0x14);
+ BUILD_BUG_ON(offsetof(compat_siginfo_t, si_pid) != 0xC);
+ BUILD_BUG_ON(offsetof(compat_siginfo_t, si_uid) != 0x10);
+
CHECK_CSI_OFFSET(_timer);
CHECK_CSI_SIZE (_timer, 3*sizeof(int));
CHECK_SI_SIZE (_timer, 6*sizeof(int));
+ BUILD_BUG_ON(offsetof(siginfo_t, si_tid) != 0x10);
+ BUILD_BUG_ON(offsetof(siginfo_t, si_overrun) != 0x14);
+ BUILD_BUG_ON(offsetof(siginfo_t, si_value) != 0x18);
+ BUILD_BUG_ON(offsetof(compat_siginfo_t, si_tid) != 0x0C);
+ BUILD_BUG_ON(offsetof(compat_siginfo_t, si_overrun) != 0x10);
+ BUILD_BUG_ON(offsetof(compat_siginfo_t, si_value) != 0x14);
+
CHECK_CSI_OFFSET(_rt);
CHECK_CSI_SIZE (_rt, 3*sizeof(int));
CHECK_SI_SIZE (_rt, 4*sizeof(int));
+ BUILD_BUG_ON(offsetof(siginfo_t, si_pid) != 0x10);
+ BUILD_BUG_ON(offsetof(siginfo_t, si_uid) != 0x14);
+ BUILD_BUG_ON(offsetof(siginfo_t, si_value) != 0x18);
+ BUILD_BUG_ON(offsetof(compat_siginfo_t, si_pid) != 0x0C);
+ BUILD_BUG_ON(offsetof(compat_siginfo_t, si_uid) != 0x10);
+ BUILD_BUG_ON(offsetof(compat_siginfo_t, si_value) != 0x14);
+
CHECK_CSI_OFFSET(_sigchld);
CHECK_CSI_SIZE (_sigchld, 5*sizeof(int));
CHECK_SI_SIZE (_sigchld, 8*sizeof(int));
+ BUILD_BUG_ON(offsetof(siginfo_t, si_pid) != 0x10);
+ BUILD_BUG_ON(offsetof(siginfo_t, si_uid) != 0x14);
+ BUILD_BUG_ON(offsetof(siginfo_t, si_status) != 0x18);
+ BUILD_BUG_ON(offsetof(siginfo_t, si_utime) != 0x20);
+ BUILD_BUG_ON(offsetof(siginfo_t, si_stime) != 0x28);
+ BUILD_BUG_ON(offsetof(compat_siginfo_t, si_pid) != 0x0C);
+ BUILD_BUG_ON(offsetof(compat_siginfo_t, si_uid) != 0x10);
+ BUILD_BUG_ON(offsetof(compat_siginfo_t, si_status) != 0x14);
+ BUILD_BUG_ON(offsetof(compat_siginfo_t, si_utime) != 0x18);
+ BUILD_BUG_ON(offsetof(compat_siginfo_t, si_stime) != 0x1C);
+
#ifdef CONFIG_X86_X32_ABI
CHECK_CSI_OFFSET(_sigchld_x32);
CHECK_CSI_SIZE (_sigchld_x32, 7*sizeof(int));
/* no _sigchld_x32 in the generic siginfo_t */
+ BUILD_BUG_ON(offsetof(compat_siginfo_t, _sifields._sigchld_x32._utime) != 0x18);
+ BUILD_BUG_ON(offsetof(compat_siginfo_t, _sifields._sigchld_x32._stime) != 0x20);
#endif
CHECK_CSI_OFFSET(_sigfault);
CHECK_CSI_SIZE (_sigfault, 4*sizeof(int));
CHECK_SI_SIZE (_sigfault, 8*sizeof(int));
+ BUILD_BUG_ON(offsetof(siginfo_t, si_addr) != 0x10);
+ BUILD_BUG_ON(offsetof(compat_siginfo_t, si_addr) != 0x0C);
+
+ BUILD_BUG_ON(offsetof(siginfo_t, si_addr_lsb) != 0x18);
+ BUILD_BUG_ON(offsetof(compat_siginfo_t, si_addr_lsb) != 0x10);
+
+ BUILD_BUG_ON(offsetof(siginfo_t, si_lower) != 0x20);
+ BUILD_BUG_ON(offsetof(siginfo_t, si_upper) != 0x28);
+ BUILD_BUG_ON(offsetof(compat_siginfo_t, si_lower) != 0x14);
+ BUILD_BUG_ON(offsetof(compat_siginfo_t, si_upper) != 0x18);
+
+ BUILD_BUG_ON(offsetof(siginfo_t, si_pkey) != 0x20);
+ BUILD_BUG_ON(offsetof(compat_siginfo_t, si_pkey) != 0x14);
+
CHECK_CSI_OFFSET(_sigpoll);
CHECK_CSI_SIZE (_sigpoll, 2*sizeof(int));
CHECK_SI_SIZE (_sigpoll, 4*sizeof(int));
+ BUILD_BUG_ON(offsetof(siginfo_t, si_band) != 0x10);
+ BUILD_BUG_ON(offsetof(siginfo_t, si_fd) != 0x18);
+ BUILD_BUG_ON(offsetof(compat_siginfo_t, si_band) != 0x0C);
+ BUILD_BUG_ON(offsetof(compat_siginfo_t, si_fd) != 0x10);
+
CHECK_CSI_OFFSET(_sigsys);
CHECK_CSI_SIZE (_sigsys, 3*sizeof(int));
CHECK_SI_SIZE (_sigsys, 4*sizeof(int));
+ BUILD_BUG_ON(offsetof(siginfo_t, si_call_addr) != 0x10);
+ BUILD_BUG_ON(offsetof(siginfo_t, si_syscall) != 0x18);
+ BUILD_BUG_ON(offsetof(siginfo_t, si_arch) != 0x1C);
+ BUILD_BUG_ON(offsetof(compat_siginfo_t, si_call_addr) != 0x0C);
+ BUILD_BUG_ON(offsetof(compat_siginfo_t, si_syscall) != 0x10);
+ BUILD_BUG_ON(offsetof(compat_siginfo_t, si_arch) != 0x14);
+
/* any new si_fields should be added here */
}
return;
check_vip:
- if (VEFLAGS & X86_EFLAGS_VIP) {
+ if ((VEFLAGS & (X86_EFLAGS_VIP | X86_EFLAGS_VIF)) ==
+ (X86_EFLAGS_VIP | X86_EFLAGS_VIF)) {
save_v86_state(regs, VM86_STI);
return;
}
#ifdef CONFIG_X86_64
. = ALIGN(PAGE_SIZE);
+ VMLINUX_SYMBOL(__entry_trampoline_start) = .;
_entry_trampoline = .;
*(.entry_trampoline)
. = ALIGN(PAGE_SIZE);
+ VMLINUX_SYMBOL(__entry_trampoline_end) = .;
ASSERT(. - _entry_trampoline == PAGE_SIZE, "entry trampoline is too big");
#endif
else
pte_access &= ~ACC_WRITE_MASK;
+ if (!kvm_is_mmio_pfn(pfn))
+ spte |= shadow_me_mask;
+
spte |= (u64)pfn << PAGE_SHIFT;
- spte |= shadow_me_mask;
if (pte_access & ACC_WRITE_MASK) {
(INTR_TYPE_HARD_EXCEPTION | MC_VECTOR | INTR_INFO_VALID_MASK);
}
+/* Undocumented: icebp/int1 */
+static inline bool is_icebp(u32 intr_info)
+{
+ return (intr_info & (INTR_INFO_INTR_TYPE_MASK | INTR_INFO_VALID_MASK))
+ == (INTR_TYPE_PRIV_SW_EXCEPTION | INTR_INFO_VALID_MASK);
+}
+
static inline bool cpu_has_vmx_msr_bitmap(void)
{
return vmcs_config.cpu_based_exec_ctrl & CPU_BASED_USE_MSR_BITMAPS;
(KVM_GUESTDBG_SINGLESTEP | KVM_GUESTDBG_USE_HW_BP))) {
vcpu->arch.dr6 &= ~15;
vcpu->arch.dr6 |= dr6 | DR6_RTM;
- if (!(dr6 & ~DR6_RESERVED)) /* icebp */
+ if (is_icebp(intr_info))
skip_emulated_instruction(vcpu);
kvm_queue_exception(vcpu, DB_VECTOR);
if (!pmd_k)
return -1;
- if (pmd_huge(*pmd_k))
+ if (pmd_large(*pmd_k))
return 0;
pte_k = pte_offset_kernel(pmd_k, address);
if (pud_none(*pud) || pud_pfn(*pud) != pud_pfn(*pud_ref))
BUG();
- if (pud_huge(*pud))
+ if (pud_large(*pud))
return 0;
pmd = pmd_offset(pud, address);
git.codelabs.ch / muen / linux.git / commitdiff