Merge tag 'v5.1-rockchip-dtfixes-1' of git://git.kernel.org/pub/scm/linux/kernel...
authorOlof Johansson <olof@lixom.net>
Sun, 7 Apr 2019 22:15:31 +0000 (15:15 -0700)
committerOlof Johansson <olof@lixom.net>
Sun, 7 Apr 2019 22:15:31 +0000 (15:15 -0700)
Fixes for dtc warnings, fixes for ethernet transfers on rk3328,
sd-card related fixes on both rk3328 ans rk3288-tinker and a
regulator fix on rock64 and making ddc actually work on the
Rock PI 4 due to missing the ddc bus.

* tag 'v5.1-rockchip-dtfixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: Remove #address/#size-cells from rk3288-veyron gpio-keys
  ARM: dts: rockchip: Remove #address/#size-cells from rk3288 mipi_dsi
  ARM: dts: rockchip: Fix gpu opp node names for rk3288
  arm64: dts: rockchip: fix rk3328 sdmmc0 write errors
  arm64: dts: rockchip: fix rk3328 rgmii high tx error rate
  ARM: dts: rockchip: Fix SD card detection on rk3288-tinker
  arm64: dts: rockchip: Fix vcc_host1_5v GPIO polarity on rk3328-rock64
  ARM: dts: rockchip: fix rk3288 cpu opp node reference
  arm64: dts: rockchip: add DDC bus on Rock Pi 4
  arm64: dts: rockchip: fix rk3328-roc-cc gmac2io tx/rx_delay

Signed-off-by: Olof Johansson <olof@lixom.net>
845 files changed:
.mailmap
Documentation/devicetree/bindings/arm/cpus.yaml
Documentation/devicetree/bindings/i2c/i2c-iop3xx.txt [new file with mode: 0644]
Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt [new file with mode: 0644]
Documentation/devicetree/bindings/i2c/i2c-mtk.txt [deleted file]
Documentation/devicetree/bindings/i2c/i2c-st-ddci2c.txt [deleted file]
Documentation/devicetree/bindings/i2c/i2c-stu300.txt [new file with mode: 0644]
Documentation/devicetree/bindings/i2c/i2c-sun6i-p2wi.txt [new file with mode: 0644]
Documentation/devicetree/bindings/i2c/i2c-sunxi-p2wi.txt [deleted file]
Documentation/devicetree/bindings/i2c/i2c-vt8500.txt [deleted file]
Documentation/devicetree/bindings/i2c/i2c-wmt.txt [new file with mode: 0644]
Documentation/devicetree/bindings/i2c/i2c-xscale.txt [deleted file]
Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt
Documentation/devicetree/bindings/net/dsa/qca8k.txt
Documentation/devicetree/bindings/serial/mtk-uart.txt
Documentation/filesystems/mount_api.txt
Documentation/i2c/busses/i2c-i801
Documentation/networking/msg_zerocopy.rst
Documentation/networking/netdev-FAQ.rst
Documentation/networking/nf_flowtable.txt
Documentation/networking/snmp_counter.rst
Documentation/virtual/kvm/api.txt
Documentation/virtual/kvm/mmu.txt
MAINTAINERS
Makefile
arch/alpha/include/asm/Kbuild
arch/alpha/include/uapi/asm/kvm_para.h [deleted file]
arch/arc/Kconfig
arch/arc/Makefile
arch/arc/boot/dts/abilis_tb100.dtsi
arch/arc/boot/dts/abilis_tb100_dvk.dts
arch/arc/boot/dts/abilis_tb101.dtsi
arch/arc/boot/dts/abilis_tb101_dvk.dts
arch/arc/boot/dts/abilis_tb10x.dtsi
arch/arc/boot/dts/axc001.dtsi
arch/arc/boot/dts/axc003.dtsi
arch/arc/boot/dts/axc003_idu.dtsi
arch/arc/boot/dts/axs10x_mb.dtsi
arch/arc/boot/dts/hsdk.dts
arch/arc/boot/dts/vdk_axc003.dtsi
arch/arc/boot/dts/vdk_axc003_idu.dtsi
arch/arc/boot/dts/vdk_axs10x_mb.dtsi
arch/arc/configs/hsdk_defconfig
arch/arc/include/asm/Kbuild
arch/arc/include/asm/arcregs.h
arch/arc/include/asm/irqflags-arcv2.h
arch/arc/include/asm/perf_event.h
arch/arc/include/asm/spinlock.h
arch/arc/include/uapi/asm/Kbuild
arch/arc/kernel/head.S
arch/arc/kernel/intc-arcv2.c
arch/arc/kernel/setup.c
arch/arc/kernel/troubleshoot.c
arch/arc/lib/Makefile
arch/arc/lib/memcpy-archs-unaligned.S [new file with mode: 0644]
arch/arc/plat-eznps/Kconfig
arch/arm/Kconfig
arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts
arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
arch/arm/boot/dts/imx6ull-pinfunc-snvs.h
arch/arm/boot/dts/ste-nomadik-nhk15.dts
arch/arm/configs/imx_v4_v5_defconfig
arch/arm/configs/imx_v6_v7_defconfig
arch/arm/include/asm/kvm_mmu.h
arch/arm/include/asm/stage2_pgtable.h
arch/arm/include/uapi/asm/Kbuild
arch/arm/include/uapi/asm/kvm_para.h [deleted file]
arch/arm/mach-cns3xxx/core.c
arch/arm/mach-imx/cpuidle-imx6q.c
arch/arm/mach-imx/mach-imx51.c
arch/arm64/Kconfig
arch/arm64/Kconfig.platforms
arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
arch/arm64/boot/dts/nvidia/tegra186.dtsi
arch/arm64/boot/dts/renesas/r8a774c0.dtsi
arch/arm64/boot/dts/renesas/r8a77990.dtsi
arch/arm64/include/asm/cputype.h
arch/arm64/include/asm/kvm_mmu.h
arch/arm64/kernel/cpufeature.c
arch/arm64/kernel/probes/kprobes.c
arch/arm64/kernel/setup.c
arch/arm64/kernel/stacktrace.c
arch/arm64/kvm/reset.c
arch/c6x/include/asm/Kbuild
arch/c6x/include/uapi/asm/Kbuild
arch/h8300/include/asm/Kbuild
arch/h8300/include/uapi/asm/Kbuild
arch/hexagon/include/asm/Kbuild
arch/hexagon/include/uapi/asm/kvm_para.h [deleted file]
arch/ia64/include/asm/Kbuild
arch/ia64/include/uapi/asm/Kbuild
arch/m68k/include/asm/Kbuild
arch/m68k/include/uapi/asm/Kbuild
arch/microblaze/include/asm/Kbuild
arch/microblaze/include/uapi/asm/Kbuild
arch/mips/bcm47xx/workarounds.c
arch/mips/include/asm/jump_label.h
arch/mips/include/uapi/asm/posix_types.h
arch/mips/kernel/vmlinux.lds.S
arch/mips/loongson64/lemote-2f/irq.c
arch/nios2/include/asm/Kbuild
arch/nios2/include/uapi/asm/Kbuild
arch/openrisc/include/asm/Kbuild
arch/openrisc/include/uapi/asm/Kbuild
arch/parisc/include/asm/Kbuild
arch/parisc/include/uapi/asm/Kbuild
arch/powerpc/include/asm/mmu.h
arch/powerpc/include/asm/ppc-opcode.h
arch/powerpc/include/asm/vdso_datapage.h
arch/powerpc/kernel/cpu_setup_6xx.S
arch/powerpc/kernel/head_32.S
arch/powerpc/kernel/security.c
arch/powerpc/kernel/vdso64/gettimeofday.S
arch/powerpc/lib/memcmp_64.S
arch/powerpc/mm/hash_low_32.S
arch/powerpc/net/bpf_jit.h
arch/powerpc/net/bpf_jit32.h
arch/powerpc/net/bpf_jit64.h
arch/powerpc/net/bpf_jit_comp64.c
arch/powerpc/platforms/pseries/pseries_energy.c
arch/powerpc/platforms/pseries/ras.c
arch/s390/include/asm/ap.h
arch/s390/include/asm/elf.h
arch/s390/include/asm/lowcore.h
arch/s390/kernel/perf_cpum_cf_diag.c
arch/s390/kernel/smp.c
arch/s390/kernel/vtime.c
arch/sh/include/asm/Kbuild
arch/sh/include/uapi/asm/Kbuild
arch/sparc/include/asm/Kbuild
arch/sparc/include/uapi/asm/kvm_para.h [deleted file]
arch/unicore32/include/asm/Kbuild
arch/unicore32/include/uapi/asm/Kbuild
arch/x86/Kconfig
arch/x86/Makefile
arch/x86/boot/compressed/misc.h
arch/x86/boot/string.c
arch/x86/hyperv/hv_init.c
arch/x86/include/asm/cpu_device_id.h
arch/x86/include/asm/cpufeature.h
arch/x86/include/asm/kvm_host.h
arch/x86/include/asm/processor-cyrix.h
arch/x86/include/asm/realmode.h
arch/x86/kernel/aperture_64.c
arch/x86/kernel/cpu/cyrix.c
arch/x86/kernel/cpu/microcode/core.c
arch/x86/kernel/cpu/resctrl/monitor.c
arch/x86/kernel/hpet.c
arch/x86/kernel/hw_breakpoint.c
arch/x86/kernel/mpparse.c
arch/x86/kvm/hyperv.c
arch/x86/kvm/mmu.c
arch/x86/kvm/mmutrace.h
arch/x86/kvm/svm.c
arch/x86/kvm/vmx/nested.c
arch/x86/kvm/vmx/vmx.c
arch/x86/kvm/vmx/vmx.h
arch/x86/kvm/x86.c
arch/x86/lib/csum-partial_64.c
arch/x86/mm/mmap.c
arch/x86/mm/pti.c
arch/x86/platform/efi/quirks.c
arch/x86/realmode/init.c
arch/xtensa/include/asm/Kbuild
arch/xtensa/include/uapi/asm/Kbuild
block/bio.c
block/blk-cgroup.c
block/blk-flush.c
block/blk-iolatency.c
block/blk-mq.c
block/blk-mq.h
block/blk-sysfs.c
drivers/acpi/bus.c
drivers/acpi/cppc_acpi.c
drivers/acpi/utils.c
drivers/android/binder.c
drivers/android/binder_alloc.c
drivers/ata/libata-zpodd.c
drivers/auxdisplay/Kconfig
drivers/auxdisplay/Makefile
drivers/auxdisplay/charlcd.c
drivers/auxdisplay/hd44780.c
drivers/auxdisplay/panel.c
drivers/base/power/domain.c
drivers/base/swnode.c
drivers/block/loop.c
drivers/block/paride/pcd.c
drivers/block/paride/pf.c
drivers/block/rbd.c
drivers/block/zram/zram_drv.c
drivers/clocksource/clps711x-timer.c
drivers/clocksource/mips-gic-timer.c
drivers/clocksource/tcb_clksrc.c
drivers/clocksource/timer-riscv.c
drivers/clocksource/timer-ti-dm.c
drivers/cpufreq/intel_pstate.c
drivers/cpufreq/scpi-cpufreq.c
drivers/dma/stm32-mdma.c
drivers/gpio/gpio-adnp.c
drivers/gpio/gpio-aspeed.c
drivers/gpio/gpio-exar.c
drivers/gpio/gpio-mockup.c
drivers/gpio/gpiolib-of.c
drivers/gpio/gpiolib.c
drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
drivers/gpu/drm/drm_drv.c
drivers/gpu/drm/drm_fb_helper.c
drivers/gpu/drm/drm_file.c
drivers/gpu/drm/exynos/exynos_mixer.c
drivers/gpu/drm/i915/gvt/cmd_parser.c
drivers/gpu/drm/i915/gvt/gtt.c
drivers/gpu/drm/i915/gvt/gtt.h
drivers/gpu/drm/i915/gvt/mmio_context.c
drivers/gpu/drm/i915/gvt/scheduler.c
drivers/gpu/drm/i915/i915_drv.h
drivers/gpu/drm/i915/i915_gem.c
drivers/gpu/drm/i915/i915_gpu_error.c
drivers/gpu/drm/i915/i915_reg.h
drivers/gpu/drm/i915/intel_bios.c
drivers/gpu/drm/i915/selftests/i915_gem_evict.c
drivers/gpu/drm/meson/meson_drv.c
drivers/gpu/drm/meson/meson_dw_hdmi.c
drivers/gpu/drm/nouveau/nouveau_debugfs.c
drivers/gpu/drm/nouveau/nouveau_dmem.c
drivers/gpu/drm/rockchip/rockchip_drm_vop.c
drivers/gpu/drm/tegra/hub.c
drivers/gpu/drm/tegra/vic.c
drivers/gpu/drm/udl/udl_connector.c
drivers/gpu/drm/udl/udl_gem.c
drivers/gpu/drm/vgem/vgem_drv.c
drivers/gpu/drm/vkms/vkms_gem.c
drivers/gpu/drm/vmwgfx/vmwgfx_fb.c
drivers/gpu/drm/vmwgfx/vmwgfx_gmrid_manager.c
drivers/i2c/busses/Kconfig
drivers/i2c/busses/i2c-i801.c
drivers/infiniband/hw/i40iw/i40iw_utils.c
drivers/infiniband/hw/mlx4/alias_GUID.c
drivers/infiniband/hw/mlx5/devx.c
drivers/infiniband/hw/mlx5/main.c
drivers/infiniband/hw/mlx5/qp.c
drivers/iommu/amd_iommu.c
drivers/iommu/amd_iommu_init.c
drivers/iommu/amd_iommu_types.h
drivers/iommu/intel-iommu.c
drivers/iommu/io-pgtable-arm-v7s.c
drivers/iommu/iommu.c
drivers/iommu/iova.c
drivers/irqchip/irq-brcmstb-l2.c
drivers/irqchip/irq-gic-v3-its.c
drivers/irqchip/irq-gic.c
drivers/irqchip/irq-imx-irqsteer.c
drivers/irqchip/irq-mbigen.c
drivers/irqchip/irq-mmp.c
drivers/irqchip/irq-mvebu-sei.c
drivers/irqchip/irq-stm32-exti.c
drivers/isdn/hardware/mISDN/hfcmulti.c
drivers/leds/leds-pca9532.c
drivers/leds/trigger/ledtrig-netdev.c
drivers/misc/habanalabs/command_submission.c
drivers/misc/habanalabs/debugfs.c
drivers/misc/habanalabs/device.c
drivers/misc/habanalabs/goya/goya.c
drivers/misc/habanalabs/habanalabs.h
drivers/misc/habanalabs/hw_queue.c
drivers/misc/habanalabs/memory.c
drivers/misc/habanalabs/mmu.c
drivers/mmc/host/alcor.c
drivers/mmc/host/davinci_mmc.c
drivers/mmc/host/mxcmmc.c
drivers/mmc/host/pxamci.c
drivers/mmc/host/renesas_sdhi_core.c
drivers/mmc/host/sdhci-omap.c
drivers/net/Kconfig
drivers/net/dsa/qca8k.c
drivers/net/dsa/qca8k.h
drivers/net/ethernet/3com/3c515.c
drivers/net/ethernet/8390/mac8390.c
drivers/net/ethernet/aquantia/atlantic/aq_ring.c
drivers/net/ethernet/cadence/macb_main.c
drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c
drivers/net/ethernet/chelsio/cxgb4/sge.c
drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
drivers/net/ethernet/hisilicon/hns3/hns3_enet.c
drivers/net/ethernet/hisilicon/hns3/hns3_enet.h
drivers/net/ethernet/ibm/ehea/ehea_main.c
drivers/net/ethernet/mellanox/mlx5/core/qp.c
drivers/net/ethernet/mellanox/mlxsw/core_env.c
drivers/net/ethernet/micrel/ks8851.c
drivers/net/ethernet/micrel/ks8851.h
drivers/net/ethernet/micrel/ks8851_mll.c
drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
drivers/net/ethernet/realtek/atp.c
drivers/net/ethernet/realtek/r8169.c
drivers/net/ethernet/sis/sis900.c
drivers/net/ethernet/stmicro/stmmac/ring_mode.c
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
drivers/net/ethernet/ti/netcp_ethss.c
drivers/net/ethernet/xilinx/xilinx_axienet_main.c
drivers/net/ieee802154/adf7242.c
drivers/net/ieee802154/mac802154_hwsim.c
drivers/net/phy/Kconfig
drivers/net/phy/broadcom.c
drivers/net/phy/dp83822.c
drivers/net/phy/meson-gxl.c
drivers/net/phy/phy_device.c
drivers/net/tun.c
drivers/net/usb/aqc111.c
drivers/net/usb/cdc_ether.c
drivers/net/vxlan.c
drivers/net/wireless/intel/iwlwifi/mvm/ftm-initiator.c
drivers/net/wireless/mediatek/mt76/dma.c
drivers/net/wireless/mediatek/mt76/mac80211.c
drivers/net/wireless/mediatek/mt76/mt76.h
drivers/net/wireless/mediatek/mt76/mt7603/beacon.c
drivers/net/wireless/mediatek/mt76/mt7603/dma.c
drivers/net/wireless/mediatek/mt76/mt7603/init.c
drivers/net/wireless/mediatek/mt76/mt7603/mac.c
drivers/net/wireless/mediatek/mt76/mt7603/main.c
drivers/net/wireless/mediatek/mt76/mt7603/mcu.c
drivers/net/wireless/mediatek/mt76/mt7603/soc.c
drivers/net/wireless/mediatek/mt76/mt76x0/initvals.h
drivers/net/wireless/mediatek/mt76/mt76x0/usb.c
drivers/net/wireless/mediatek/mt76/mt76x02.h
drivers/net/wireless/mediatek/mt76/mt76x02_debugfs.c
drivers/net/wireless/mediatek/mt76/mt76x02_dfs.c
drivers/net/wireless/mediatek/mt76/mt76x02_mac.c
drivers/net/wireless/mediatek/mt76/mt76x02_mac.h
drivers/net/wireless/mediatek/mt76/mt76x02_mmio.c
drivers/net/wireless/mediatek/mt76/mt76x02_phy.c
drivers/net/wireless/mediatek/mt76/mt76x02_usb_core.c
drivers/net/wireless/mediatek/mt76/mt76x02_util.c
drivers/net/wireless/mediatek/mt76/mt76x2/init.c
drivers/net/wireless/mediatek/mt76/mt76x2/mt76x2.h
drivers/net/wireless/mediatek/mt76/mt76x2/pci_init.c
drivers/net/wireless/mediatek/mt76/mt76x2/pci_mcu.c
drivers/net/wireless/mediatek/mt76/mt76x2/phy.c
drivers/net/wireless/mediatek/mt76/mt76x2/usb.c
drivers/net/wireless/mediatek/mt76/mt76x2/usb_mac.c
drivers/net/wireless/mediatek/mt76/tx.c
drivers/net/wireless/mediatek/mt76/usb.c
drivers/net/wireless/mediatek/mt7601u/usb.c
drivers/nvme/host/multipath.c
drivers/nvme/host/tcp.c
drivers/nvme/target/core.c
drivers/nvme/target/io-cmd-file.c
drivers/parport/daisy.c
drivers/parport/probe.c
drivers/parport/share.c
drivers/pci/pci.h
drivers/pci/pcie/bw_notification.c
drivers/pci/probe.c
drivers/phy/allwinner/phy-sun4i-usb.c
drivers/platform/chrome/cros_ec_debugfs.c
drivers/platform/chrome/wilco_ec/mailbox.c
drivers/reset/reset-meson-audio-arb.c
drivers/s390/cio/chsc.c
drivers/s390/cio/vfio_ccw_drv.c
drivers/s390/crypto/ap_bus.c
drivers/s390/crypto/ap_bus.h
drivers/s390/crypto/ap_queue.c
drivers/s390/crypto/zcrypt_api.c
drivers/s390/net/qeth_core_main.c
drivers/s390/net/qeth_l2_main.c
drivers/s390/net/qeth_l3_main.c
drivers/s390/scsi/zfcp_erp.c
drivers/s390/scsi/zfcp_ext.h
drivers/s390/scsi/zfcp_fc.c
drivers/s390/scsi/zfcp_scsi.c
drivers/scsi/aacraid/aacraid.h
drivers/scsi/aacraid/commsup.c
drivers/scsi/hisi_sas/hisi_sas_main.c
drivers/scsi/ibmvscsi/ibmvfc.c
drivers/scsi/ibmvscsi/ibmvfc.h
drivers/scsi/ibmvscsi/ibmvscsi.c
drivers/scsi/mpt3sas/mpt3sas_base.c
drivers/scsi/mpt3sas/mpt3sas_scsih.c
drivers/scsi/qla2xxx/qla_init.c
drivers/scsi/qla2xxx/qla_os.c
drivers/scsi/qla4xxx/ql4_os.c
drivers/scsi/scsi_lib.c
drivers/scsi/scsi_sysfs.c
drivers/scsi/scsi_transport_iscsi.c
drivers/scsi/sd.c
drivers/soc/bcm/bcm2835-power.c
drivers/staging/Kconfig
drivers/staging/Makefile
drivers/staging/axis-fifo/Kconfig
drivers/staging/comedi/comedidev.h
drivers/staging/comedi/drivers.c
drivers/staging/comedi/drivers/ni_mio_common.c
drivers/staging/erofs/dir.c
drivers/staging/erofs/unzip_vle.c
drivers/staging/erofs/unzip_vle_lz4.c
drivers/staging/mt7621-dts/gbpc1.dts
drivers/staging/mt7621-dts/mt7621.dtsi
drivers/staging/mt7621-eth/Documentation/devicetree/bindings/net/mediatek-net-gsw.txt [deleted file]
drivers/staging/mt7621-eth/Kconfig [deleted file]
drivers/staging/mt7621-eth/Makefile [deleted file]
drivers/staging/mt7621-eth/TODO [deleted file]
drivers/staging/mt7621-eth/ethtool.c [deleted file]
drivers/staging/mt7621-eth/ethtool.h [deleted file]
drivers/staging/mt7621-eth/gsw_mt7620.h [deleted file]
drivers/staging/mt7621-eth/gsw_mt7621.c [deleted file]
drivers/staging/mt7621-eth/mdio.c [deleted file]
drivers/staging/mt7621-eth/mdio.h [deleted file]
drivers/staging/mt7621-eth/mdio_mt7620.c [deleted file]
drivers/staging/mt7621-eth/mtk_eth_soc.c [deleted file]
drivers/staging/mt7621-eth/mtk_eth_soc.h [deleted file]
drivers/staging/mt7621-eth/soc_mt7621.c [deleted file]
drivers/staging/mt7621-pci/Kconfig
drivers/staging/octeon/ethernet-mdio.c
drivers/staging/octeon/ethernet.c
drivers/staging/octeon/octeon-ethernet.h
drivers/staging/olpc_dcon/olpc_dcon_xo_1.c
drivers/staging/rtl8188eu/core/rtw_xmit.c
drivers/staging/rtl8188eu/include/rtw_xmit.h
drivers/staging/rtl8712/rtl8712_cmd.c
drivers/staging/rtl8712/rtl8712_cmd.h
drivers/staging/rtl8723bs/core/rtw_xmit.c
drivers/staging/rtl8723bs/include/rtw_xmit.h
drivers/staging/rtlwifi/phydm/rtl_phydm.c
drivers/staging/rtlwifi/rtl8822be/fw.c
drivers/staging/speakup/speakup_soft.c
drivers/staging/speakup/spk_priv.h
drivers/staging/speakup/synth.c
drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c
drivers/staging/vt6655/device_main.c
drivers/thermal/broadcom/bcm2835_thermal.c
drivers/thermal/cpu_cooling.c
drivers/thermal/intel/int340x_thermal/int3400_thermal.c
drivers/thermal/intel/intel_powerclamp.c
drivers/thermal/mtk_thermal.c
drivers/thermal/samsung/exynos_tmu.c
drivers/tty/serial/ar933x_uart.c
drivers/tty/serial/atmel_serial.c
drivers/tty/serial/kgdboc.c
drivers/tty/serial/max310x.c
drivers/tty/serial/mvebu-uart.c
drivers/tty/serial/mxs-auart.c
drivers/tty/serial/qcom_geni_serial.c
drivers/tty/serial/sc16is7xx.c
drivers/tty/serial/sh-sci.c
drivers/tty/tty_port.c
drivers/usb/class/cdc-acm.c
drivers/usb/common/common.c
drivers/usb/core/hcd.c
drivers/usb/dwc3/dwc3-pci.c
drivers/usb/gadget/function/f_hid.c
drivers/usb/gadget/udc/net2272.c
drivers/usb/gadget/udc/net2280.c
drivers/usb/host/u132-hcd.c
drivers/usb/host/xhci-dbgcap.c
drivers/usb/host/xhci-hub.c
drivers/usb/host/xhci-rcar.c
drivers/usb/host/xhci-ring.c
drivers/usb/host/xhci.h
drivers/usb/misc/usb251xb.c
drivers/usb/mtu3/Kconfig
drivers/usb/serial/cp210x.c
drivers/usb/serial/ftdi_sio.c
drivers/usb/serial/ftdi_sio_ids.h
drivers/usb/serial/mos7720.c
drivers/usb/serial/option.c
drivers/usb/typec/tcpm/tcpm.c
drivers/usb/typec/tcpm/wcove.c
drivers/virt/vboxguest/vboxguest_core.c
drivers/virt/vboxguest/vboxguest_core.h
drivers/virt/vboxguest/vboxguest_linux.c
drivers/virt/vboxguest/vboxguest_utils.c
drivers/virt/vboxguest/vboxguest_version.h
drivers/virt/vboxguest/vmmdev.h
fs/afs/fsclient.c
fs/afs/yfsclient.c
fs/block_dev.c
fs/btrfs/extent-tree.c
fs/btrfs/qgroup.c
fs/btrfs/raid56.c
fs/btrfs/transaction.c
fs/btrfs/tree-log.c
fs/btrfs/volumes.c
fs/ceph/inode.c
fs/cifs/cifsfs.c
fs/cifs/cifsfs.h
fs/cifs/file.c
fs/cifs/smb2maperror.c
fs/cifs/smb2pdu.c
fs/cifs/trace.h
fs/ext4/ext4_jbd2.h
fs/ext4/file.c
fs/ext4/indirect.c
fs/ext4/inode.c
fs/ext4/ioctl.c
fs/ext4/resize.c
fs/ext4/super.c
fs/fs_parser.c
fs/io_uring.c
fs/iomap.c
fs/lockd/host.c
fs/locks.c
fs/nfs/client.c
fs/nfs/flexfilelayout/flexfilelayout.c
fs/nfs/nfs4proc.c
fs/notify/fanotify/fanotify_user.c
fs/notify/inotify/inotify_user.c
fs/ocfs2/refcounttree.c
fs/open.c
fs/proc/kcore.c
fs/proc/proc_sysctl.c
fs/udf/inode.c
fs/udf/truncate.c
fs/udf/udfdecl.h
fs/xfs/libxfs/xfs_bmap.c
fs/xfs/scrub/btree.c
fs/xfs/scrub/dabtree.c
fs/xfs/xfs_discard.c
fs/xfs/xfs_file.c
include/acpi/acoutput.h
include/acpi/platform/aclinux.h
include/dt-bindings/reset/amlogic,meson-g12a-reset.h
include/linux/atalk.h
include/linux/blk-mq.h
include/linux/blk_types.h
include/linux/blkdev.h
include/linux/bpf.h
include/linux/bpf_verifier.h
include/linux/brcmphy.h
include/linux/ceph/libceph.h
include/linux/device.h
include/linux/hugetlb.h
include/linux/irq.h
include/linux/irqchip/arm-gic.h
include/linux/kcore.h
include/linux/list.h
include/linux/mlx5/qp.h
include/linux/net.h
include/linux/page-isolation.h
include/linux/parport.h
include/linux/platform_data/gpio/gpio-amd-fch.h
include/linux/sbitmap.h
include/linux/sched/signal.h
include/linux/slab.h
include/linux/socket.h
include/linux/uio.h
include/linux/vbox_utils.h
include/misc/charlcd.h
include/net/act_api.h
include/net/sch_generic.h
include/net/sctp/checksum.h
include/net/sock.h
include/net/tc_act/tc_gact.h
include/net/xdp_sock.h
include/uapi/linux/Kbuild
include/uapi/linux/bpf.h
include/uapi/linux/vbox_vmmdev_types.h
kernel/bpf/syscall.c
kernel/bpf/verifier.c
kernel/cpu.c
kernel/events/core.c
kernel/futex.c
kernel/irq/devres.c
kernel/irq/manage.c
kernel/ptrace.c
kernel/sched/core.c
kernel/sched/cpufreq_schedutil.c
kernel/sched/fair.c
kernel/time/jiffies.c
kernel/trace/ftrace.c
kernel/trace/trace_dynevent.c
kernel/trace/trace_events_hist.c
kernel/watchdog.c
kernel/workqueue.c
lib/rhashtable.c
lib/sbitmap.c
mm/debug.c
mm/kasan/kasan.h
mm/memory.c
mm/memory_hotplug.c
mm/mempolicy.c
mm/migrate.c
mm/page_alloc.c
mm/page_isolation.c
mm/slab.c
mm/slab.h
mm/slab_common.c
mm/slub.c
mm/sparse.c
net/appletalk/aarp.c
net/appletalk/ddp.c
net/bridge/br_netfilter_hooks.c
net/bridge/br_netfilter_ipv6.c
net/ceph/ceph_common.c
net/ceph/messenger.c
net/ceph/mon_client.c
net/core/devlink.c
net/core/filter.c
net/core/net-sysfs.c
net/dccp/ipv6.c
net/ipv6/netfilter/ip6t_srh.c
net/ipv6/route.c
net/ipv6/tcp_ipv6.c
net/mpls/mpls_iptunnel.c
net/ncsi/ncsi-netlink.c
net/netfilter/Kconfig
net/netfilter/nf_conntrack_sip.c
net/netfilter/nf_tables_api.c
net/netfilter/nft_objref.c
net/netfilter/nft_redir.c
net/netfilter/nft_set_rbtree.c
net/netlink/genetlink.c
net/nfc/llcp_sock.c
net/openvswitch/datapath.c
net/packet/af_packet.c
net/rose/rose_subr.c
net/rxrpc/output.c
net/sched/Kconfig
net/sched/act_api.c
net/sched/act_bpf.c
net/sched/act_connmark.c
net/sched/act_csum.c
net/sched/act_gact.c
net/sched/act_ife.c
net/sched/act_ipt.c
net/sched/act_mirred.c
net/sched/act_nat.c
net/sched/act_pedit.c
net/sched/act_police.c
net/sched/act_sample.c
net/sched/act_simple.c
net/sched/act_skbedit.c
net/sched/act_skbmod.c
net/sched/act_tunnel_key.c
net/sched/act_vlan.c
net/sched/cls_api.c
net/sched/sch_cake.c
net/sctp/socket.c
net/socket.c
net/strparser/strparser.c
net/sunrpc/clnt.c
net/sunrpc/xprtsock.c
net/tipc/group.c
net/tipc/net.c
net/tipc/node.c
net/tipc/socket.c
net/tipc/topsrv.c
net/xdp/xdp_umem.c
scripts/Makefile.build
scripts/checkpatch.pl
scripts/coccinelle/free/put_device.cocci
scripts/coccinelle/misc/badty.cocci
scripts/kconfig/lxdialog/inputbox.c
scripts/kconfig/nconf.c
scripts/kconfig/nconf.gui.c
scripts/mod/modpost.c
security/Kconfig
security/selinux/ss/policydb.c
security/yama/yama_lsm.c
sound/core/oss/pcm_oss.c
sound/core/pcm_native.c
sound/core/rawmidi.c
sound/core/seq/oss/seq_oss_synth.c
sound/drivers/opl3/opl3_voice.h
sound/firewire/motu/motu.c
sound/isa/sb/sb8.c
sound/pci/echoaudio/echoaudio.c
sound/pci/hda/hda_codec.c
sound/pci/hda/hda_intel.c
sound/pci/hda/patch_ca0132.c
sound/pci/hda/patch_realtek.c
tools/arch/alpha/include/uapi/asm/mman.h
tools/arch/arm64/include/uapi/asm/unistd.h
tools/arch/mips/include/uapi/asm/mman.h
tools/arch/parisc/include/uapi/asm/mman.h
tools/arch/powerpc/include/uapi/asm/kvm.h
tools/arch/x86/include/asm/cpufeatures.h
tools/arch/xtensa/include/uapi/asm/mman.h
tools/bpf/bpftool/prog.c
tools/build/Makefile.feature
tools/build/feature/test-all.c
tools/build/feature/test-libopencsd.c
tools/include/uapi/asm-generic/mman-common-tools.h [new file with mode: 0644]
tools/include/uapi/asm-generic/mman-common.h
tools/include/uapi/asm-generic/mman.h
tools/include/uapi/asm-generic/unistd.h
tools/include/uapi/drm/i915_drm.h
tools/include/uapi/linux/bpf.h
tools/include/uapi/linux/fcntl.h
tools/include/uapi/linux/in.h
tools/include/uapi/linux/mman.h
tools/lib/bpf/Makefile
tools/lib/bpf/README.rst
tools/lib/bpf/btf.c
tools/lib/bpf/libbpf.c
tools/lib/bpf/libbpf.h
tools/lib/bpf/libbpf.map
tools/lib/bpf/xsk.c
tools/objtool/Makefile
tools/objtool/check.c
tools/perf/Documentation/Build.txt
tools/perf/Documentation/perf-config.txt
tools/perf/Documentation/perf-record.txt
tools/perf/Documentation/perf-report.txt
tools/perf/Documentation/perf-script.txt
tools/perf/Documentation/perf-stat.txt
tools/perf/Documentation/tips.txt
tools/perf/Makefile.config
tools/perf/Makefile.perf
tools/perf/arch/x86/entry/syscalls/syscall_64.tbl
tools/perf/arch/x86/util/Build
tools/perf/arch/x86/util/archinsn.c [new file with mode: 0644]
tools/perf/bench/epoll-ctl.c
tools/perf/bench/epoll-wait.c
tools/perf/builtin-list.c
tools/perf/builtin-record.c
tools/perf/builtin-report.c
tools/perf/builtin-script.c
tools/perf/builtin-stat.c
tools/perf/builtin-top.c
tools/perf/builtin.h
tools/perf/check-headers.sh
tools/perf/perf.c
tools/perf/perf.h
tools/perf/pmu-events/arch/powerpc/power8/other.json
tools/perf/pmu-events/arch/x86/amdfam17h/branch.json [new file with mode: 0644]
tools/perf/pmu-events/arch/x86/amdfam17h/cache.json [new file with mode: 0644]
tools/perf/pmu-events/arch/x86/amdfam17h/core.json [new file with mode: 0644]
tools/perf/pmu-events/arch/x86/amdfam17h/floating-point.json [new file with mode: 0644]
tools/perf/pmu-events/arch/x86/amdfam17h/memory.json [new file with mode: 0644]
tools/perf/pmu-events/arch/x86/amdfam17h/other.json [new file with mode: 0644]
tools/perf/pmu-events/arch/x86/mapfile.csv
tools/perf/scripts/python/export-to-postgresql.py
tools/perf/scripts/python/export-to-sqlite.py
tools/perf/scripts/python/exported-sql-viewer.py
tools/perf/tests/attr/test-record-C0
tools/perf/tests/attr/test-record-basic
tools/perf/tests/attr/test-record-branch-any
tools/perf/tests/attr/test-record-branch-filter-any
tools/perf/tests/attr/test-record-branch-filter-any_call
tools/perf/tests/attr/test-record-branch-filter-any_ret
tools/perf/tests/attr/test-record-branch-filter-hv
tools/perf/tests/attr/test-record-branch-filter-ind_call
tools/perf/tests/attr/test-record-branch-filter-k
tools/perf/tests/attr/test-record-branch-filter-u
tools/perf/tests/attr/test-record-count
tools/perf/tests/attr/test-record-data
tools/perf/tests/attr/test-record-freq
tools/perf/tests/attr/test-record-graph-default
tools/perf/tests/attr/test-record-graph-dwarf
tools/perf/tests/attr/test-record-graph-fp
tools/perf/tests/attr/test-record-group
tools/perf/tests/attr/test-record-group-sampling
tools/perf/tests/attr/test-record-group1
tools/perf/tests/attr/test-record-no-buffering
tools/perf/tests/attr/test-record-no-inherit
tools/perf/tests/attr/test-record-no-samples
tools/perf/tests/attr/test-record-period
tools/perf/tests/attr/test-record-raw
tools/perf/tests/backward-ring-buffer.c
tools/perf/tests/evsel-tp-sched.c
tools/perf/tests/expr.c
tools/perf/tests/openat-syscall-all-cpus.c
tools/perf/trace/beauty/mmap_flags.sh
tools/perf/ui/browser.c
tools/perf/ui/browsers/Build
tools/perf/ui/browsers/annotate.c
tools/perf/ui/browsers/hists.c
tools/perf/ui/browsers/res_sample.c [new file with mode: 0644]
tools/perf/ui/browsers/scripts.c
tools/perf/util/annotate.c
tools/perf/util/annotate.h
tools/perf/util/archinsn.h [new file with mode: 0644]
tools/perf/util/bpf-event.c
tools/perf/util/bpf-event.h
tools/perf/util/build-id.c
tools/perf/util/config.c
tools/perf/util/cs-etm-decoder/cs-etm-decoder.c
tools/perf/util/data.c
tools/perf/util/data.h
tools/perf/util/dso.c
tools/perf/util/dso.h
tools/perf/util/env.c
tools/perf/util/env.h
tools/perf/util/evlist.c
tools/perf/util/evlist.h
tools/perf/util/evsel.c
tools/perf/util/evsel.h
tools/perf/util/header.c
tools/perf/util/header.h
tools/perf/util/hist.c
tools/perf/util/hist.h
tools/perf/util/intel-pt-decoder/intel-pt-decoder.c
tools/perf/util/machine.c
tools/perf/util/map.c
tools/perf/util/ordered-events.c
tools/perf/util/parse-events.c
tools/perf/util/pmu.c
tools/perf/util/probe-event.c
tools/perf/util/session.c
tools/perf/util/sort.c
tools/perf/util/sort.h
tools/perf/util/stat.c
tools/perf/util/symbol.c
tools/perf/util/symbol_conf.h
tools/perf/util/time-utils.c
tools/perf/util/time-utils.h
tools/power/x86/turbostat/turbostat.c
tools/testing/selftests/bpf/bpf_helpers.h
tools/testing/selftests/bpf/prog_tests/map_lock.c
tools/testing/selftests/bpf/prog_tests/spinlock.c
tools/testing/selftests/bpf/progs/test_sock_fields_kern.c
tools/testing/selftests/bpf/test_btf.c
tools/testing/selftests/bpf/test_sock_fields.c
tools/testing/selftests/bpf/verifier/calls.c
tools/testing/selftests/bpf/verifier/ref_tracking.c
tools/testing/selftests/bpf/verifier/sock.c
tools/testing/selftests/kvm/Makefile
tools/testing/selftests/kvm/include/kvm_util.h
tools/testing/selftests/kvm/lib/kvm_util.c
tools/testing/selftests/kvm/x86_64/cr4_cpuid_sync_test.c
tools/testing/selftests/kvm/x86_64/state_test.c
tools/testing/selftests/tc-testing/tc-tests/actions/bpf.json
tools/testing/selftests/tc-testing/tc-tests/actions/connmark.json
tools/testing/selftests/tc-testing/tc-tests/actions/csum.json
tools/testing/selftests/tc-testing/tc-tests/actions/gact.json
tools/testing/selftests/tc-testing/tc-tests/actions/ife.json
tools/testing/selftests/tc-testing/tc-tests/actions/mirred.json
tools/testing/selftests/tc-testing/tc-tests/actions/nat.json
tools/testing/selftests/tc-testing/tc-tests/actions/pedit.json [new file with mode: 0644]
tools/testing/selftests/tc-testing/tc-tests/actions/police.json
tools/testing/selftests/tc-testing/tc-tests/actions/sample.json
tools/testing/selftests/tc-testing/tc-tests/actions/simple.json
tools/testing/selftests/tc-testing/tc-tests/actions/skbedit.json
tools/testing/selftests/tc-testing/tc-tests/actions/skbmod.json
tools/testing/selftests/tc-testing/tc-tests/actions/tunnel_key.json
tools/testing/selftests/tc-testing/tc-tests/actions/vlan.json
virt/kvm/arm/hyp/vgic-v3-sr.c
virt/kvm/arm/mmu.c
virt/kvm/arm/vgic/vgic-its.c
virt/kvm/arm/vgic/vgic-v3.c
virt/kvm/arm/vgic/vgic.c
virt/kvm/eventfd.c
virt/kvm/kvm_main.c

index 37e1847..b2cde86 100644 (file)
--- a/.mailmap
+++ b/.mailmap
@@ -224,3 +224,5 @@ Yakir Yang <kuankuan.y@gmail.com> <ykk@rock-chips.com>
 Yusuke Goda <goda.yusuke@renesas.com>
 Gustavo Padovan <gustavo@las.ic.unicamp.br>
 Gustavo Padovan <padovan@profusion.mobi>
+Changbin Du <changbin.du@intel.com> <changbin.du@intel.com>
+Changbin Du <changbin.du@intel.com> <changbin.du@gmail.com>
index 365dcf3..82dd758 100644 (file)
@@ -228,7 +228,7 @@ patternProperties:
                 - renesas,r9a06g032-smp
                 - rockchip,rk3036-smp
                 - rockchip,rk3066-smp
-               - socionext,milbeaut-m10v-smp
+                - socionext,milbeaut-m10v-smp
                 - ste,dbx500-smp
 
       cpu-release-addr:
diff --git a/Documentation/devicetree/bindings/i2c/i2c-iop3xx.txt b/Documentation/devicetree/bindings/i2c/i2c-iop3xx.txt
new file mode 100644 (file)
index 0000000..dcc8390
--- /dev/null
@@ -0,0 +1,20 @@
+i2c Controller on XScale platforms such as IOP3xx and IXP4xx
+
+Required properties:
+- compatible : Must be one of
+  "intel,iop3xx-i2c"
+  "intel,ixp4xx-i2c";
+- reg
+- #address-cells = <1>;
+- #size-cells = <0>;
+
+Optional properties:
+- Child nodes conforming to i2c bus binding
+
+Example:
+
+i2c@c8011000 {
+       compatible = "intel,ixp4xx-i2c";
+       reg = <0xc8011000 0x18>;
+       interrupts = <33 IRQ_TYPE_LEVEL_LOW>;
+};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.txt
new file mode 100644 (file)
index 0000000..ee4c324
--- /dev/null
@@ -0,0 +1,44 @@
+* MediaTek's I2C controller
+
+The MediaTek's I2C controller is used to interface with I2C devices.
+
+Required properties:
+  - compatible: value should be either of the following.
+      "mediatek,mt2701-i2c", "mediatek,mt6577-i2c": for MediaTek MT2701
+      "mediatek,mt2712-i2c": for MediaTek MT2712
+      "mediatek,mt6577-i2c": for MediaTek MT6577
+      "mediatek,mt6589-i2c": for MediaTek MT6589
+      "mediatek,mt7622-i2c": for MediaTek MT7622
+      "mediatek,mt7623-i2c", "mediatek,mt6577-i2c": for MediaTek MT7623
+      "mediatek,mt7629-i2c", "mediatek,mt2712-i2c": for MediaTek MT7629
+      "mediatek,mt8173-i2c": for MediaTek MT8173
+  - reg: physical base address of the controller and dma base, length of memory
+    mapped region.
+  - interrupts: interrupt number to the cpu.
+  - clock-div: the fixed value for frequency divider of clock source in i2c
+    module. Each IC may be different.
+  - clocks: clock name from clock manager
+  - clock-names: Must include "main" and "dma", if enable have-pmic need include
+    "pmic" extra.
+
+Optional properties:
+  - clock-frequency: Frequency in Hz of the bus when transfer, the default value
+    is 100000.
+  - mediatek,have-pmic: platform can control i2c form special pmic side.
+    Only mt6589 and mt8135 support this feature.
+  - mediatek,use-push-pull: IO config use push-pull mode.
+
+Example:
+
+       i2c0: i2c@1100d000 {
+                       compatible = "mediatek,mt6577-i2c";
+                       reg = <0x1100d000 0x70>,
+                             <0x11000300 0x80>;
+                       interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
+                       clock-frequency = <400000>;
+                       mediatek,have-pmic;
+                       clock-div = <16>;
+                       clocks = <&i2c0_ck>, <&ap_dma_ck>;
+                       clock-names = "main", "dma";
+       };
+
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mtk.txt b/Documentation/devicetree/bindings/i2c/i2c-mtk.txt
deleted file mode 100644 (file)
index ee4c324..0000000
+++ /dev/null
@@ -1,44 +0,0 @@
-* MediaTek's I2C controller
-
-The MediaTek's I2C controller is used to interface with I2C devices.
-
-Required properties:
-  - compatible: value should be either of the following.
-      "mediatek,mt2701-i2c", "mediatek,mt6577-i2c": for MediaTek MT2701
-      "mediatek,mt2712-i2c": for MediaTek MT2712
-      "mediatek,mt6577-i2c": for MediaTek MT6577
-      "mediatek,mt6589-i2c": for MediaTek MT6589
-      "mediatek,mt7622-i2c": for MediaTek MT7622
-      "mediatek,mt7623-i2c", "mediatek,mt6577-i2c": for MediaTek MT7623
-      "mediatek,mt7629-i2c", "mediatek,mt2712-i2c": for MediaTek MT7629
-      "mediatek,mt8173-i2c": for MediaTek MT8173
-  - reg: physical base address of the controller and dma base, length of memory
-    mapped region.
-  - interrupts: interrupt number to the cpu.
-  - clock-div: the fixed value for frequency divider of clock source in i2c
-    module. Each IC may be different.
-  - clocks: clock name from clock manager
-  - clock-names: Must include "main" and "dma", if enable have-pmic need include
-    "pmic" extra.
-
-Optional properties:
-  - clock-frequency: Frequency in Hz of the bus when transfer, the default value
-    is 100000.
-  - mediatek,have-pmic: platform can control i2c form special pmic side.
-    Only mt6589 and mt8135 support this feature.
-  - mediatek,use-push-pull: IO config use push-pull mode.
-
-Example:
-
-       i2c0: i2c@1100d000 {
-                       compatible = "mediatek,mt6577-i2c";
-                       reg = <0x1100d000 0x70>,
-                             <0x11000300 0x80>;
-                       interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
-                       clock-frequency = <400000>;
-                       mediatek,have-pmic;
-                       clock-div = <16>;
-                       clocks = <&i2c0_ck>, <&ap_dma_ck>;
-                       clock-names = "main", "dma";
-       };
-
diff --git a/Documentation/devicetree/bindings/i2c/i2c-st-ddci2c.txt b/Documentation/devicetree/bindings/i2c/i2c-st-ddci2c.txt
deleted file mode 100644 (file)
index bd81a48..0000000
+++ /dev/null
@@ -1,15 +0,0 @@
-ST Microelectronics DDC I2C
-
-Required properties :
-- compatible : Must be "st,ddci2c"
-- reg: physical base address of the controller and length of memory mapped
-     region.
-- interrupts: interrupt number to the cpu.
-- #address-cells = <1>;
-- #size-cells = <0>;
-
-Optional properties:
-- Child nodes conforming to i2c bus binding
-
-Examples :
-
diff --git a/Documentation/devicetree/bindings/i2c/i2c-stu300.txt b/Documentation/devicetree/bindings/i2c/i2c-stu300.txt
new file mode 100644 (file)
index 0000000..bd81a48
--- /dev/null
@@ -0,0 +1,15 @@
+ST Microelectronics DDC I2C
+
+Required properties :
+- compatible : Must be "st,ddci2c"
+- reg: physical base address of the controller and length of memory mapped
+     region.
+- interrupts: interrupt number to the cpu.
+- #address-cells = <1>;
+- #size-cells = <0>;
+
+Optional properties:
+- Child nodes conforming to i2c bus binding
+
+Examples :
+
diff --git a/Documentation/devicetree/bindings/i2c/i2c-sun6i-p2wi.txt b/Documentation/devicetree/bindings/i2c/i2c-sun6i-p2wi.txt
new file mode 100644 (file)
index 0000000..49df005
--- /dev/null
@@ -0,0 +1,41 @@
+
+* Allwinner P2WI (Push/Pull 2 Wire Interface) controller
+
+Required properties :
+
+ - reg             : Offset and length of the register set for the device.
+ - compatible      : Should one of the following:
+                     - "allwinner,sun6i-a31-p2wi"
+ - interrupts      : The interrupt line connected to the P2WI peripheral.
+ - clocks          : The gate clk connected to the P2WI peripheral.
+ - resets          : The reset line connected to the P2WI peripheral.
+
+Optional properties :
+
+ - clock-frequency : Desired P2WI bus clock frequency in Hz. If not set the
+default frequency is 100kHz
+
+A P2WI may contain one child node encoding a P2WI slave device.
+
+Slave device properties:
+  Required properties:
+   - reg           : the I2C slave address used during the initialization
+                     process to switch from I2C to P2WI mode
+
+Example:
+
+       p2wi@1f03400 {
+               compatible = "allwinner,sun6i-a31-p2wi";
+               reg = <0x01f03400 0x400>;
+               interrupts = <0 39 4>;
+               clocks = <&apb0_gates 3>;
+               clock-frequency = <6000000>;
+               resets = <&apb0_rst 3>;
+
+               axp221: pmic@68 {
+                       compatible = "x-powers,axp221";
+                       reg = <0x68>;
+
+                       /* ... */
+               };
+       };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-sunxi-p2wi.txt b/Documentation/devicetree/bindings/i2c/i2c-sunxi-p2wi.txt
deleted file mode 100644 (file)
index 49df005..0000000
+++ /dev/null
@@ -1,41 +0,0 @@
-
-* Allwinner P2WI (Push/Pull 2 Wire Interface) controller
-
-Required properties :
-
- - reg             : Offset and length of the register set for the device.
- - compatible      : Should one of the following:
-                     - "allwinner,sun6i-a31-p2wi"
- - interrupts      : The interrupt line connected to the P2WI peripheral.
- - clocks          : The gate clk connected to the P2WI peripheral.
- - resets          : The reset line connected to the P2WI peripheral.
-
-Optional properties :
-
- - clock-frequency : Desired P2WI bus clock frequency in Hz. If not set the
-default frequency is 100kHz
-
-A P2WI may contain one child node encoding a P2WI slave device.
-
-Slave device properties:
-  Required properties:
-   - reg           : the I2C slave address used during the initialization
-                     process to switch from I2C to P2WI mode
-
-Example:
-
-       p2wi@1f03400 {
-               compatible = "allwinner,sun6i-a31-p2wi";
-               reg = <0x01f03400 0x400>;
-               interrupts = <0 39 4>;
-               clocks = <&apb0_gates 3>;
-               clock-frequency = <6000000>;
-               resets = <&apb0_rst 3>;
-
-               axp221: pmic@68 {
-                       compatible = "x-powers,axp221";
-                       reg = <0x68>;
-
-                       /* ... */
-               };
-       };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-vt8500.txt b/Documentation/devicetree/bindings/i2c/i2c-vt8500.txt
deleted file mode 100644 (file)
index 94a425e..0000000
+++ /dev/null
@@ -1,24 +0,0 @@
-* Wondermedia I2C Controller
-
-Required properties :
-
- - compatible : should be "wm,wm8505-i2c"
- - reg : Offset and length of the register set for the device
- - interrupts : <IRQ> where IRQ is the interrupt number
- - clocks : phandle to the I2C clock source
-
-Optional properties :
-
- - clock-frequency : desired I2C bus clock frequency in Hz.
-       Valid values are 100000 and 400000.
-       Default to 100000 if not specified, or invalid value.
-
-Example :
-
-       i2c_0: i2c@d8280000 {
-               compatible = "wm,wm8505-i2c";
-               reg = <0xd8280000 0x1000>;
-               interrupts = <19>;
-               clocks = <&clki2c0>;
-               clock-frequency = <400000>;
-       };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-wmt.txt b/Documentation/devicetree/bindings/i2c/i2c-wmt.txt
new file mode 100644 (file)
index 0000000..94a425e
--- /dev/null
@@ -0,0 +1,24 @@
+* Wondermedia I2C Controller
+
+Required properties :
+
+ - compatible : should be "wm,wm8505-i2c"
+ - reg : Offset and length of the register set for the device
+ - interrupts : <IRQ> where IRQ is the interrupt number
+ - clocks : phandle to the I2C clock source
+
+Optional properties :
+
+ - clock-frequency : desired I2C bus clock frequency in Hz.
+       Valid values are 100000 and 400000.
+       Default to 100000 if not specified, or invalid value.
+
+Example :
+
+       i2c_0: i2c@d8280000 {
+               compatible = "wm,wm8505-i2c";
+               reg = <0xd8280000 0x1000>;
+               interrupts = <19>;
+               clocks = <&clki2c0>;
+               clock-frequency = <400000>;
+       };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-xscale.txt b/Documentation/devicetree/bindings/i2c/i2c-xscale.txt
deleted file mode 100644 (file)
index dcc8390..0000000
+++ /dev/null
@@ -1,20 +0,0 @@
-i2c Controller on XScale platforms such as IOP3xx and IXP4xx
-
-Required properties:
-- compatible : Must be one of
-  "intel,iop3xx-i2c"
-  "intel,ixp4xx-i2c";
-- reg
-- #address-cells = <1>;
-- #size-cells = <0>;
-
-Optional properties:
-- Child nodes conforming to i2c bus binding
-
-Example:
-
-i2c@c8011000 {
-       compatible = "intel,ixp4xx-i2c";
-       reg = <0xc8011000 0x18>;
-       interrupts = <33 IRQ_TYPE_LEVEL_LOW>;
-};
index 8de96a4..f977ea7 100644 (file)
@@ -16,6 +16,7 @@ Required properties:
     - "renesas,irqc-r8a7793" (R-Car M2-N)
     - "renesas,irqc-r8a7794" (R-Car E2)
     - "renesas,intc-ex-r8a774a1" (RZ/G2M)
+    - "renesas,intc-ex-r8a774c0" (RZ/G2E)
     - "renesas,intc-ex-r8a7795" (R-Car H3)
     - "renesas,intc-ex-r8a7796" (R-Car M3-W)
     - "renesas,intc-ex-r8a77965" (R-Car M3-N)
index bbcb255..93a7469 100644 (file)
@@ -12,10 +12,15 @@ Required properties:
 Subnodes:
 
 The integrated switch subnode should be specified according to the binding
-described in dsa/dsa.txt. As the QCA8K switches do not have a N:N mapping of
-port and PHY id, each subnode describing a port needs to have a valid phandle
-referencing the internal PHY connected to it. The CPU port of this switch is
-always port 0.
+described in dsa/dsa.txt. If the QCA8K switch is connect to a SoC's external
+mdio-bus each subnode describing a port needs to have a valid phandle
+referencing the internal PHY it is connected to. This is because there's no
+N:N mapping of port and PHY id.
+
+Don't use mixed external and internal mdio-bus configurations, as this is
+not supported by the hardware.
+
+The CPU port of this switch is always port 0.
 
 A CPU port node has the following optional node:
 
@@ -31,8 +36,9 @@ For QCA8K the 'fixed-link' sub-node supports only the following properties:
 - 'full-duplex' (boolean, optional), to indicate that full duplex is
   used. When absent, half duplex is assumed.
 
-Example:
+Examples:
 
+for the external mdio-bus configuration:
 
        &mdio0 {
                phy_port1: phy@0 {
@@ -55,12 +61,12 @@ Example:
                        reg = <4>;
                };
 
-               switch0@0 {
+               switch@10 {
                        compatible = "qca,qca8337";
                        #address-cells = <1>;
                        #size-cells = <0>;
 
-                       reg = <0>;
+                       reg = <0x10>;
 
                        ports {
                                #address-cells = <1>;
@@ -108,3 +114,56 @@ Example:
                        };
                };
        };
+
+for the internal master mdio-bus configuration:
+
+       &mdio0 {
+               switch@10 {
+                       compatible = "qca,qca8337";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       reg = <0x10>;
+
+                       ports {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+
+                               port@0 {
+                                       reg = <0>;
+                                       label = "cpu";
+                                       ethernet = <&gmac1>;
+                                       phy-mode = "rgmii";
+                                       fixed-link {
+                                               speed = 1000;
+                                               full-duplex;
+                                       };
+                               };
+
+                               port@1 {
+                                       reg = <1>;
+                                       label = "lan1";
+                               };
+
+                               port@2 {
+                                       reg = <2>;
+                                       label = "lan2";
+                               };
+
+                               port@3 {
+                                       reg = <3>;
+                                       label = "lan3";
+                               };
+
+                               port@4 {
+                                       reg = <4>;
+                                       label = "lan4";
+                               };
+
+                               port@5 {
+                                       reg = <5>;
+                                       label = "wan";
+                               };
+                       };
+               };
+       };
index 742cb47..bcfb131 100644 (file)
@@ -16,6 +16,7 @@ Required properties:
   * "mediatek,mt8127-uart" for MT8127 compatible UARTS
   * "mediatek,mt8135-uart" for MT8135 compatible UARTS
   * "mediatek,mt8173-uart" for MT8173 compatible UARTS
+  * "mediatek,mt8183-uart", "mediatek,mt6577-uart" for MT8183 compatible UARTS
   * "mediatek,mt6577-uart" for MT6577 and all of the above
 
 - reg: The base address of the UART register bank.
index 944d196..00ff0cf 100644 (file)
@@ -12,11 +12,13 @@ CONTENTS
 
  (4) Filesystem context security.
 
- (5) VFS filesystem context operations.
+ (5) VFS filesystem context API.
 
- (6) Parameter description.
+ (6) Superblock creation helpers.
 
- (7) Parameter helper functions.
+ (7) Parameter description.
+
+ (8) Parameter helper functions.
 
 
 ========
@@ -41,12 +43,15 @@ The creation of new mounts is now to be done in a multistep process:
 
  (7) Destroy the context.
 
-To support this, the file_system_type struct gains a new field:
+To support this, the file_system_type struct gains two new fields:
 
        int (*init_fs_context)(struct fs_context *fc);
+       const struct fs_parameter_description *parameters;
 
-which is invoked to set up the filesystem-specific parts of a filesystem
-context, including the additional space.
+The first is invoked to set up the filesystem-specific parts of a filesystem
+context, including the additional space, and the second points to the
+parameter description for validation at registration time and querying by a
+future system call.
 
 Note that security initialisation is done *after* the filesystem is called so
 that the namespaces may be adjusted first.
@@ -73,9 +78,9 @@ context.  This is represented by the fs_context structure:
                void                    *s_fs_info;
                unsigned int            sb_flags;
                unsigned int            sb_flags_mask;
+               unsigned int            s_iflags;
+               unsigned int            lsm_flags;
                enum fs_context_purpose purpose:8;
-               bool                    sloppy:1;
-               bool                    silent:1;
                ...
        };
 
@@ -141,6 +146,10 @@ The fs_context fields are as follows:
 
      Which bits SB_* flags are to be set/cleared in super_block::s_flags.
 
+ (*) unsigned int s_iflags
+
+     These will be bitwise-OR'd with s->s_iflags when a superblock is created.
+
  (*) enum fs_context_purpose
 
      This indicates the purpose for which the context is intended.  The
@@ -150,17 +159,6 @@ The fs_context fields are as follows:
        FS_CONTEXT_FOR_SUBMOUNT         -- New automatic submount of extant mount
        FS_CONTEXT_FOR_RECONFIGURE      -- Change an existing mount
 
- (*) bool sloppy
- (*) bool silent
-
-     These are set if the sloppy or silent mount options are given.
-
-     [NOTE] sloppy is probably unnecessary when userspace passes over one
-     option at a time since the error can just be ignored if userspace deems it
-     to be unimportant.
-
-     [NOTE] silent is probably redundant with sb_flags & SB_SILENT.
-
 The mount context is created by calling vfs_new_fs_context() or
 vfs_dup_fs_context() and is destroyed with put_fs_context().  Note that the
 structure is not refcounted.
@@ -342,28 +340,47 @@ number of operations used by the new mount code for this purpose:
      It should return 0 on success or a negative error code on failure.
 
 
-=================================
-VFS FILESYSTEM CONTEXT OPERATIONS
-=================================
+==========================
+VFS FILESYSTEM CONTEXT API
+==========================
 
-There are four operations for creating a filesystem context and
-one for destroying a context:
+There are four operations for creating a filesystem context and one for
+destroying a context:
 
- (*) struct fs_context *vfs_new_fs_context(struct file_system_type *fs_type,
-                                          struct dentry *reference,
-                                          unsigned int sb_flags,
-                                          unsigned int sb_flags_mask,
-                                          enum fs_context_purpose purpose);
+ (*) struct fs_context *fs_context_for_mount(
+               struct file_system_type *fs_type,
+               unsigned int sb_flags);
 
-     Create a filesystem context for a given filesystem type and purpose.  This
-     allocates the filesystem context, sets the superblock flags, initialises
-     the security and calls fs_type->init_fs_context() to initialise the
-     filesystem private data.
+     Allocate a filesystem context for the purpose of setting up a new mount,
+     whether that be with a new superblock or sharing an existing one.  This
+     sets the superblock flags, initialises the security and calls
+     fs_type->init_fs_context() to initialise the filesystem private data.
 
-     reference can be NULL or it may indicate the root dentry of a superblock
-     that is going to be reconfigured (FS_CONTEXT_FOR_RECONFIGURE) or
-     the automount point that triggered a submount (FS_CONTEXT_FOR_SUBMOUNT).
-     This is provided as a source of namespace information.
+     fs_type specifies the filesystem type that will manage the context and
+     sb_flags presets the superblock flags stored therein.
+
+ (*) struct fs_context *fs_context_for_reconfigure(
+               struct dentry *dentry,
+               unsigned int sb_flags,
+               unsigned int sb_flags_mask);
+
+     Allocate a filesystem context for the purpose of reconfiguring an
+     existing superblock.  dentry provides a reference to the superblock to be
+     configured.  sb_flags and sb_flags_mask indicate which superblock flags
+     need changing and to what.
+
+ (*) struct fs_context *fs_context_for_submount(
+               struct file_system_type *fs_type,
+               struct dentry *reference);
+
+     Allocate a filesystem context for the purpose of creating a new mount for
+     an automount point or other derived superblock.  fs_type specifies the
+     filesystem type that will manage the context and the reference dentry
+     supplies the parameters.  Namespaces are propagated from the reference
+     dentry's superblock also.
+
+     Note that it's not a requirement that the reference dentry be of the same
+     filesystem type as fs_type.
 
  (*) struct fs_context *vfs_dup_fs_context(struct fs_context *src_fc);
 
@@ -390,20 +407,6 @@ context pointer or a negative error code.
 For the remaining operations, if an error occurs, a negative error code will be
 returned.
 
- (*) int vfs_get_tree(struct fs_context *fc);
-
-     Get or create the mountable root and superblock, using the parameters in
-     the filesystem context to select/configure the superblock.  This invokes
-     the ->validate() op and then the ->get_tree() op.
-
-     [NOTE] ->validate() could perhaps be rolled into ->get_tree() and
-     ->reconfigure().
-
- (*) struct vfsmount *vfs_create_mount(struct fs_context *fc);
-
-     Create a mount given the parameters in the specified filesystem context.
-     Note that this does not attach the mount to anything.
-
  (*) int vfs_parse_fs_param(struct fs_context *fc,
                            struct fs_parameter *param);
 
@@ -432,17 +435,80 @@ returned.
      clear the pointer, but then becomes responsible for disposing of the
      object.
 
- (*) int vfs_parse_fs_string(struct fs_context *fc, char *key,
+ (*) int vfs_parse_fs_string(struct fs_context *fc, const char *key,
                             const char *value, size_t v_size);
 
-     A wrapper around vfs_parse_fs_param() that just passes a constant string.
+     A wrapper around vfs_parse_fs_param() that copies the value string it is
+     passed.
 
  (*) int generic_parse_monolithic(struct fs_context *fc, void *data);
 
      Parse a sys_mount() data page, assuming the form to be a text list
      consisting of key[=val] options separated by commas.  Each item in the
      list is passed to vfs_mount_option().  This is the default when the
-     ->parse_monolithic() operation is NULL.
+     ->parse_monolithic() method is NULL.
+
+ (*) int vfs_get_tree(struct fs_context *fc);
+
+     Get or create the mountable root and superblock, using the parameters in
+     the filesystem context to select/configure the superblock.  This invokes
+     the ->get_tree() method.
+
+ (*) struct vfsmount *vfs_create_mount(struct fs_context *fc);
+
+     Create a mount given the parameters in the specified filesystem context.
+     Note that this does not attach the mount to anything.
+
+
+===========================
+SUPERBLOCK CREATION HELPERS
+===========================
+
+A number of VFS helpers are available for use by filesystems for the creation
+or looking up of superblocks.
+
+ (*) struct super_block *
+     sget_fc(struct fs_context *fc,
+            int (*test)(struct super_block *sb, struct fs_context *fc),
+            int (*set)(struct super_block *sb, struct fs_context *fc));
+
+     This is the core routine.  If test is non-NULL, it searches for an
+     existing superblock matching the criteria held in the fs_context, using
+     the test function to match them.  If no match is found, a new superblock
+     is created and the set function is called to set it up.
+
+     Prior to the set function being called, fc->s_fs_info will be transferred
+     to sb->s_fs_info - and fc->s_fs_info will be cleared if set returns
+     success (ie. 0).
+
+The following helpers all wrap sget_fc():
+
+ (*) int vfs_get_super(struct fs_context *fc,
+                      enum vfs_get_super_keying keying,
+                      int (*fill_super)(struct super_block *sb,
+                                        struct fs_context *fc))
+
+     This creates/looks up a deviceless superblock.  The keying indicates how
+     many superblocks of this type may exist and in what manner they may be
+     shared:
+
+       (1) vfs_get_single_super
+
+           Only one such superblock may exist in the system.  Any further
+           attempt to get a new superblock gets this one (and any parameter
+           differences are ignored).
+
+       (2) vfs_get_keyed_super
+
+           Multiple superblocks of this type may exist and they're keyed on
+           their s_fs_info pointer (for example this may refer to a
+           namespace).
+
+       (3) vfs_get_independent_super
+
+           Multiple independent superblocks of this type may exist.  This
+           function never matches an existing one and always creates a new
+           one.
 
 
 =====================
@@ -454,35 +520,22 @@ There's a core description struct that links everything together:
 
        struct fs_parameter_description {
                const char      name[16];
-               u8              nr_params;
-               u8              nr_alt_keys;
-               u8              nr_enums;
-               bool            ignore_unknown;
-               bool            no_source;
-               const char *const *keys;
-               const struct constant_table *alt_keys;
                const struct fs_parameter_spec *specs;
                const struct fs_parameter_enum *enums;
        };
 
 For example:
 
-       enum afs_param {
+       enum {
                Opt_autocell,
                Opt_bar,
                Opt_dyn,
                Opt_foo,
                Opt_source,
-               nr__afs_params
        };
 
        static const struct fs_parameter_description afs_fs_parameters = {
                .name           = "kAFS",
-               .nr_params      = nr__afs_params,
-               .nr_alt_keys    = ARRAY_SIZE(afs_param_alt_keys),
-               .nr_enums       = ARRAY_SIZE(afs_param_enums),
-               .keys           = afs_param_keys,
-               .alt_keys       = afs_param_alt_keys,
                .specs          = afs_param_specs,
                .enums          = afs_param_enums,
        };
@@ -494,28 +547,24 @@ The members are as follows:
      The name to be used in error messages generated by the parse helper
      functions.
 
- (2) u8 nr_params;
-
-     The number of discrete parameter identifiers.  This indicates the number
-     of elements in the ->types[] array and also limits the values that may be
-     used in the values that the ->keys[] array maps to.
-
-     It is expected that, for example, two parameters that are related, say
-     "acl" and "noacl" with have the same ID, but will be flagged to indicate
-     that one is the inverse of the other.  The value can then be picked out
-     from the parse result.
+ (2) const struct fs_parameter_specification *specs;
 
- (3) const struct fs_parameter_specification *specs;
+     Table of parameter specifications, terminated with a null entry, where the
+     entries are of type:
 
-     Table of parameter specifications, where the entries are of type:
-
-       struct fs_parameter_type {
-               enum fs_parameter_spec  type:8;
-               u8                      flags;
+       struct fs_parameter_spec {
+               const char              *name;
+               u8                      opt;
+               enum fs_parameter_type  type:8;
+               unsigned short          flags;
        };
 
-     and the parameter identifier is the index to the array.  'type' indicates
-     the desired value type and must be one of:
+     The 'name' field is a string to match exactly to the parameter key (no
+     wildcards, patterns and no case-independence) and 'opt' is the value that
+     will be returned by the fs_parser() function in the case of a successful
+     match.
+
+     The 'type' field indicates the desired value type and must be one of:
 
        TYPE NAME               EXPECTED VALUE          RESULT IN
        ======================= ======================= =====================
@@ -525,85 +574,65 @@ The members are as follows:
        fs_param_is_u32_octal   32-bit octal int        result->uint_32
        fs_param_is_u32_hex     32-bit hex int          result->uint_32
        fs_param_is_s32         32-bit signed int       result->int_32
+       fs_param_is_u64         64-bit unsigned int     result->uint_64
        fs_param_is_enum        Enum value name         result->uint_32
        fs_param_is_string      Arbitrary string        param->string
        fs_param_is_blob        Binary blob             param->blob
        fs_param_is_blockdev    Blockdev path           * Needs lookup
        fs_param_is_path        Path                    * Needs lookup
-       fs_param_is_fd          File descriptor         param->file
-
-     And each parameter can be qualified with 'flags':
-
-       fs_param_v_optional     The value is optional
-       fs_param_neg_with_no    If key name is prefixed with "no", it is false
-       fs_param_neg_with_empty If value is "", it is false
-       fs_param_deprecated     The parameter is deprecated.
-
-     For example:
-
-       static const struct fs_parameter_spec afs_param_specs[nr__afs_params] = {
-               [Opt_autocell]  = { fs_param_is flag },
-               [Opt_bar]       = { fs_param_is_enum },
-               [Opt_dyn]       = { fs_param_is flag },
-               [Opt_foo]       = { fs_param_is_bool, fs_param_neg_with_no },
-               [Opt_source]    = { fs_param_is_string },
-       };
+       fs_param_is_fd          File descriptor         result->int_32
 
      Note that if the value is of fs_param_is_bool type, fs_parse() will try
      to match any string value against "0", "1", "no", "yes", "false", "true".
 
-     [!] NOTE that the table must be sorted according to primary key name so
-        that ->keys[] is also sorted.
-
- (4) const char *const *keys;
-
-     Table of primary key names for the parameters.  There must be one entry
-     per defined parameter.  The table is optional if ->nr_params is 0.  The
-     table is just an array of names e.g.:
+     Each parameter can also be qualified with 'flags':
 
-       static const char *const afs_param_keys[nr__afs_params] = {
-               [Opt_autocell]  = "autocell",
-               [Opt_bar]       = "bar",
-               [Opt_dyn]       = "dyn",
-               [Opt_foo]       = "foo",
-               [Opt_source]    = "source",
-       };
-
-     [!] NOTE that the table must be sorted such that the table can be searched
-        with bsearch() using strcmp().  This means that the Opt_* values must
-        correspond to the entries in this table.
-
- (5) const struct constant_table *alt_keys;
-     u8 nr_alt_keys;
-
-     Table of additional key names and their mappings to parameter ID plus the
-     number of elements in the table.  This is optional.  The table is just an
-     array of { name, integer } pairs, e.g.:
+       fs_param_v_optional     The value is optional
+       fs_param_neg_with_no    result->negated set if key is prefixed with "no"
+       fs_param_neg_with_empty result->negated set if value is ""
+       fs_param_deprecated     The parameter is deprecated.
 
-       static const struct constant_table afs_param_keys[] = {
-               { "baz",        Opt_bar },
-               { "dynamic",    Opt_dyn },
+     These are wrapped with a number of convenience wrappers:
+
+       MACRO                   SPECIFIES
+       ======================= ===============================================
+       fsparam_flag()          fs_param_is_flag
+       fsparam_flag_no()       fs_param_is_flag, fs_param_neg_with_no
+       fsparam_bool()          fs_param_is_bool
+       fsparam_u32()           fs_param_is_u32
+       fsparam_u32oct()        fs_param_is_u32_octal
+       fsparam_u32hex()        fs_param_is_u32_hex
+       fsparam_s32()           fs_param_is_s32
+       fsparam_u64()           fs_param_is_u64
+       fsparam_enum()          fs_param_is_enum
+       fsparam_string()        fs_param_is_string
+       fsparam_blob()          fs_param_is_blob
+       fsparam_bdev()          fs_param_is_blockdev
+       fsparam_path()          fs_param_is_path
+       fsparam_fd()            fs_param_is_fd
+
+     all of which take two arguments, name string and option number - for
+     example:
+
+       static const struct fs_parameter_spec afs_param_specs[] = {
+               fsparam_flag    ("autocell",    Opt_autocell),
+               fsparam_flag    ("dyn",         Opt_dyn),
+               fsparam_string  ("source",      Opt_source),
+               fsparam_flag_no ("foo",         Opt_foo),
+               {}
        };
 
-     [!] NOTE that the table must be sorted such that strcmp() can be used with
-        bsearch() to search the entries.
-
-     The parameter ID can also be fs_param_key_removed to indicate that a
-     deprecated parameter has been removed and that an error will be given.
-     This differs from fs_param_deprecated where the parameter may still have
-     an effect.
-
-     Further, the behaviour of the parameter may differ when an alternate name
-     is used (for instance with NFS, "v3", "v4.2", etc. are alternate names).
+     An addition macro, __fsparam() is provided that takes an additional pair
+     of arguments to specify the type and the flags for anything that doesn't
+     match one of the above macros.
 
  (6) const struct fs_parameter_enum *enums;
-     u8 nr_enums;
 
-     Table of enum value names to integer mappings and the number of elements
-     stored therein.  This is of type:
+     Table of enum value names to integer mappings, terminated with a null
+     entry.  This is of type:
 
        struct fs_parameter_enum {
-               u8              param_id;
+               u8              opt;
                char            name[14];
                u8              value;
        };
@@ -621,11 +650,6 @@ The members are as follows:
      try to look the value up in the enum table and the result will be stored
      in the parse result.
 
- (7) bool no_source;
-
-     If this is set, fs_parse() will ignore any "source" parameter and not
-     pass it to the filesystem.
-
 The parser should be pointed to by the parser pointer in the file_system_type
 struct as this will provide validation on registration (if
 CONFIG_VALIDATE_FS_PARSER=y) and will allow the description to be queried from
@@ -650,9 +674,8 @@ process the parameters it is given.
                int             value;
        };
 
-     and it must be sorted such that it can be searched using bsearch() using
-     strcmp().  If a match is found, the corresponding value is returned.  If a
-     match isn't found, the not_found value is returned instead.
+     If a match is found, the corresponding value is returned.  If a match
+     isn't found, the not_found value is returned instead.
 
  (*) bool validate_constant_table(const struct constant_table *tbl,
                                  size_t tbl_size,
@@ -665,36 +688,36 @@ process the parameters it is given.
      should just be set to lie inside the low-to-high range.
 
      If all is good, true is returned.  If the table is invalid, errors are
-     logged to dmesg, the stack is dumped and false is returned.
+     logged to dmesg and false is returned.
+
+ (*) bool fs_validate_description(const struct fs_parameter_description *desc);
+
+     This performs some validation checks on a parameter description.  It
+     returns true if the description is good and false if it is not.  It will
+     log errors to dmesg if validation fails.
 
  (*) int fs_parse(struct fs_context *fc,
-                 const struct fs_param_parser *parser,
+                 const struct fs_parameter_description *desc,
                  struct fs_parameter *param,
-                 struct fs_param_parse_result *result);
+                 struct fs_parse_result *result);
 
      This is the main interpreter of parameters.  It uses the parameter
-     description (parser) to look up the name of the parameter to use and to
-     convert that to a parameter ID (stored in result->key).
+     description to look up a parameter by key name and to convert that to an
+     option number (which it returns).
 
      If successful, and if the parameter type indicates the result is a
      boolean, integer or enum type, the value is converted by this function and
-     the result stored in result->{boolean,int_32,uint_32}.
+     the result stored in result->{boolean,int_32,uint_32,uint_64}.
 
      If a match isn't initially made, the key is prefixed with "no" and no
      value is present then an attempt will be made to look up the key with the
      prefix removed.  If this matches a parameter for which the type has flag
-     fs_param_neg_with_no set, then a match will be made and the value will be
-     set to false/0/NULL.
-
-     If the parameter is successfully matched and, optionally, parsed
-     correctly, 1 is returned.  If the parameter isn't matched and
-     parser->ignore_unknown is set, then 0 is returned.  Otherwise -EINVAL is
-     returned.
-
- (*) bool fs_validate_description(const struct fs_parameter_description *desc);
+     fs_param_neg_with_no set, then a match will be made and result->negated
+     will be set to true.
 
-     This is validates the parameter description.  It returns true if the
-     description is good and false if it is not.
+     If the parameter isn't matched, -ENOPARAM will be returned; if the
+     parameter is matched, but the value is erroneous, -EINVAL will be
+     returned; otherwise the parameter's option number will be returned.
 
  (*) int fs_lookup_param(struct fs_context *fc,
                         struct fs_parameter *value,
index d1ee484..ee9984f 100644 (file)
@@ -36,6 +36,7 @@ Supported adapters:
   * Intel Cannon Lake (PCH)
   * Intel Cedar Fork (PCH)
   * Intel Ice Lake (PCH)
+  * Intel Comet Lake (PCH)
    Datasheets: Publicly available at the Intel website
 
 On Intel Patsburg and later chipsets, both the normal host SMBus controller
index 18c1415..ace5620 100644 (file)
@@ -50,7 +50,7 @@ the excellent reporting over at LWN.net or read the original code.
 
   patchset
     [PATCH net-next v4 0/9] socket sendmsg MSG_ZEROCOPY
-    http://lkml.kernel.org/r/20170803202945.70750-1-willemdebruijn.kernel@gmail.com
+    https://lkml.kernel.org/netdev/20170803202945.70750-1-willemdebruijn.kernel@gmail.com
 
 
 Interface
index 0ac5fa7..8c7a713 100644 (file)
@@ -131,6 +131,19 @@ it to the maintainer to figure out what is the most recent and current
 version that should be applied. If there is any doubt, the maintainer
 will reply and ask what should be done.
 
+Q: I made changes to only a few patches in a patch series should I resend only those changed?
+--------------------------------------------------------------------------------------------
+A: No, please resend the entire patch series and make sure you do number your
+patches such that it is clear this is the latest and greatest set of patches
+that can be applied.
+
+Q: I submitted multiple versions of a patch series and it looks like a version other than the last one has been accepted, what should I do?
+-------------------------------------------------------------------------------------------------------------------------------------------
+A: There is no revert possible, once it is pushed out, it stays like that.
+Please send incremental versions on top of what has been merged in order to fix
+the patches the way they would look like if your latest patch series was to be
+merged.
+
 Q: How can I tell what patches are queued up for backporting to the various stable releases?
 --------------------------------------------------------------------------------------------
 A: Normally Greg Kroah-Hartman collects stable commits himself, but for
index 54128c5..ca2136c 100644 (file)
@@ -44,10 +44,10 @@ including the Netfilter hooks and the flowtable fastpath bypass.
      /         \    /          \     |Routing |   /            \
   -->  ingress  ---> prerouting ---> |decision|   | postrouting |--> neigh_xmit
      \_________/    \__________/     ----------   \____________/          ^
-       |      ^          |               |               ^                |
-   flowtable  |          |          ____\/___            |                |
-       |      |          |         /         \           |                |
-    __\/___   |          --------->| forward |------------                |
+       |      ^                          |               ^                |
+   flowtable  |                     ____\/___            |                |
+       |      |                    /         \           |                |
+    __\/___   |                    | forward |------------                |
     |-----|   |                    \_________/                            |
     |-----|   |                 'flow offload' rule                       |
     |-----|   |                   adds entry to                           |
index 52b026b..38a4edc 100644 (file)
@@ -413,7 +413,7 @@ algorithm.
 .. _F-RTO: https://tools.ietf.org/html/rfc5682
 
 TCP Fast Path
-============
+=============
 When kernel receives a TCP packet, it has two paths to handler the
 packet, one is fast path, another is slow path. The comment in kernel
 code provides a good explanation of them, I pasted them below::
@@ -681,6 +681,7 @@ The TCP stack receives an out of order duplicate packet, so it sends a
 DSACK to the sender.
 
 * TcpExtTCPDSACKRecv
+
 The TCP stack receives a DSACK, which indicates an acknowledged
 duplicate packet is received.
 
@@ -690,7 +691,7 @@ The TCP stack receives a DSACK, which indicate an out of order
 duplicate packet is received.
 
 invalid SACK and DSACK
-====================
+======================
 When a SACK (or DSACK) block is invalid, a corresponding counter would
 be updated. The validation method is base on the start/end sequence
 number of the SACK block. For more details, please refer the comment
@@ -704,11 +705,13 @@ explaination:
 .. _Add counters for discarded SACK blocks: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=18f02545a9a16c9a89778b91a162ad16d510bb32
 
 * TcpExtTCPSACKDiscard
+
 This counter indicates how many SACK blocks are invalid. If the invalid
 SACK block is caused by ACK recording, the TCP stack will only ignore
 it and won't update this counter.
 
 * TcpExtTCPDSACKIgnoredOld and TcpExtTCPDSACKIgnoredNoUndo
+
 When a DSACK block is invalid, one of these two counters would be
 updated. Which counter will be updated depends on the undo_marker flag
 of the TCP socket. If the undo_marker is not set, the TCP stack isn't
@@ -719,7 +722,7 @@ will be updated. If the undo_marker is set, TcpExtTCPDSACKIgnoredOld
 will be updated. As implied in its name, it might be an old packet.
 
 SACK shift
-=========
+==========
 The linux networking stack stores data in sk_buff struct (skb for
 short). If a SACK block acrosses multiple skb, the TCP stack will try
 to re-arrange data in these skb. E.g. if a SACK block acknowledges seq
@@ -730,12 +733,15 @@ seq 14 to 20. All data in skb2 will be moved to skb1, and skb2 will be
 discard, this operation is 'merge'.
 
 * TcpExtTCPSackShifted
+
 A skb is shifted
 
 * TcpExtTCPSackMerged
+
 A skb is merged
 
 * TcpExtTCPSackShiftFallback
+
 A skb should be shifted or merged, but the TCP stack doesn't do it for
 some reasons.
 
index 7de9eee..67068c4 100644 (file)
@@ -5,25 +5,32 @@ The Definitive KVM (Kernel-based Virtual Machine) API Documentation
 ----------------------
 
 The kvm API is a set of ioctls that are issued to control various aspects
-of a virtual machine.  The ioctls belong to three classes
+of a virtual machine.  The ioctls belong to three classes:
 
  - System ioctls: These query and set global attributes which affect the
    whole kvm subsystem.  In addition a system ioctl is used to create
-   virtual machines
+   virtual machines.
 
  - VM ioctls: These query and set attributes that affect an entire virtual
    machine, for example memory layout.  In addition a VM ioctl is used to
-   create virtual cpus (vcpus).
+   create virtual cpus (vcpus) and devices.
 
-   Only run VM ioctls from the same process (address space) that was used
-   to create the VM.
+   VM ioctls must be issued from the same process (address space) that was
+   used to create the VM.
 
  - vcpu ioctls: These query and set attributes that control the operation
    of a single virtual cpu.
 
-   Only run vcpu ioctls from the same thread that was used to create the
-   vcpu.
+   vcpu ioctls should be issued from the same thread that was used to create
+   the vcpu, except for asynchronous vcpu ioctl that are marked as such in
+   the documentation.  Otherwise, the first ioctl after switching threads
+   could see a performance impact.
 
+ - device ioctls: These query and set attributes that control the operation
+   of a single device.
+
+   device ioctls must be issued from the same process (address space) that
+   was used to create the VM.
 
 2. File descriptors
 -------------------
@@ -32,17 +39,34 @@ The kvm API is centered around file descriptors.  An initial
 open("/dev/kvm") obtains a handle to the kvm subsystem; this handle
 can be used to issue system ioctls.  A KVM_CREATE_VM ioctl on this
 handle will create a VM file descriptor which can be used to issue VM
-ioctls.  A KVM_CREATE_VCPU ioctl on a VM fd will create a virtual cpu
-and return a file descriptor pointing to it.  Finally, ioctls on a vcpu
-fd can be used to control the vcpu, including the important task of
-actually running guest code.
+ioctls.  A KVM_CREATE_VCPU or KVM_CREATE_DEVICE ioctl on a VM fd will
+create a virtual cpu or device and return a file descriptor pointing to
+the new resource.  Finally, ioctls on a vcpu or device fd can be used
+to control the vcpu or device.  For vcpus, this includes the important
+task of actually running guest code.
 
 In general file descriptors can be migrated among processes by means
 of fork() and the SCM_RIGHTS facility of unix domain socket.  These
 kinds of tricks are explicitly not supported by kvm.  While they will
 not cause harm to the host, their actual behavior is not guaranteed by
-the API.  The only supported use is one virtual machine per process,
-and one vcpu per thread.
+the API.  See "General description" for details on the ioctl usage
+model that is supported by KVM.
+
+It is important to note that althought VM ioctls may only be issued from
+the process that created the VM, a VM's lifecycle is associated with its
+file descriptor, not its creator (process).  In other words, the VM and
+its resources, *including the associated address space*, are not freed
+until the last reference to the VM's file descriptor has been released.
+For example, if fork() is issued after ioctl(KVM_CREATE_VM), the VM will
+not be freed until both the parent (original) process and its child have
+put their references to the VM's file descriptor.
+
+Because a VM's resources are not freed until the last reference to its
+file descriptor is released, creating additional references to a VM via
+via fork(), dup(), etc... without careful consideration is strongly
+discouraged and may have unwanted side effects, e.g. memory allocated
+by and on behalf of the VM's process may not be freed/unaccounted when
+the VM is shut down.
 
 
 It is important to note that althought VM ioctls may only be issued from
@@ -515,11 +539,15 @@ c) KVM_INTERRUPT_SET_LEVEL
 Note that any value for 'irq' other than the ones stated above is invalid
 and incurs unexpected behavior.
 
+This is an asynchronous vcpu ioctl and can be invoked from any thread.
+
 MIPS:
 
 Queues an external interrupt to be injected into the virtual CPU. A negative
 interrupt number dequeues the interrupt.
 
+This is an asynchronous vcpu ioctl and can be invoked from any thread.
+
 
 4.17 KVM_DEBUG_GUEST
 
@@ -1086,14 +1114,12 @@ struct kvm_userspace_memory_region {
 #define KVM_MEM_LOG_DIRTY_PAGES        (1UL << 0)
 #define KVM_MEM_READONLY       (1UL << 1)
 
-This ioctl allows the user to create or modify a guest physical memory
-slot.  When changing an existing slot, it may be moved in the guest
-physical memory space, or its flags may be modified.  It may not be
-resized.  Slots may not overlap in guest physical address space.
-Bits 0-15 of "slot" specifies the slot id and this value should be
-less than the maximum number of user memory slots supported per VM.
-The maximum allowed slots can be queried using KVM_CAP_NR_MEMSLOTS,
-if this capability is supported by the architecture.
+This ioctl allows the user to create, modify or delete a guest physical
+memory slot.  Bits 0-15 of "slot" specify the slot id and this value
+should be less than the maximum number of user memory slots supported per
+VM.  The maximum allowed slots can be queried using KVM_CAP_NR_MEMSLOTS,
+if this capability is supported by the architecture.  Slots may not
+overlap in guest physical address space.
 
 If KVM_CAP_MULTI_ADDRESS_SPACE is available, bits 16-31 of "slot"
 specifies the address space which is being modified.  They must be
@@ -1102,6 +1128,10 @@ KVM_CAP_MULTI_ADDRESS_SPACE capability.  Slots in separate address spaces
 are unrelated; the restriction on overlapping slots only applies within
 each address space.
 
+Deleting a slot is done by passing zero for memory_size.  When changing
+an existing slot, it may be moved in the guest physical memory space,
+or its flags may be modified, but it may not be resized.
+
 Memory for the region is taken starting at the address denoted by the
 field userspace_addr, which must point at user addressable memory for
 the entire memory slot size.  Any object may back this memory, including
@@ -2493,7 +2523,7 @@ KVM_S390_MCHK (vm, vcpu) - machine check interrupt; cr 14 bits in parm,
                            machine checks needing further payload are not
                            supported by this ioctl)
 
-Note that the vcpu ioctl is asynchronous to vcpu execution.
+This is an asynchronous vcpu ioctl and can be invoked from any thread.
 
 4.78 KVM_PPC_GET_HTAB_FD
 
@@ -3042,8 +3072,7 @@ KVM_S390_INT_EMERGENCY - sigp emergency; parameters in .emerg
 KVM_S390_INT_EXTERNAL_CALL - sigp external call; parameters in .extcall
 KVM_S390_MCHK - machine check interrupt; parameters in .mchk
 
-
-Note that the vcpu ioctl is asynchronous to vcpu execution.
+This is an asynchronous vcpu ioctl and can be invoked from any thread.
 
 4.94 KVM_S390_GET_IRQ_STATE
 
index f365102..2efe0ef 100644 (file)
@@ -142,7 +142,7 @@ Shadow pages contain the following information:
     If clear, this page corresponds to a guest page table denoted by the gfn
     field.
   role.quadrant:
-    When role.cr4_pae=0, the guest uses 32-bit gptes while the host uses 64-bit
+    When role.gpte_is_8_bytes=0, the guest uses 32-bit gptes while the host uses 64-bit
     sptes.  That means a guest page table contains more ptes than the host,
     so multiple shadow pages are needed to shadow one guest page.
     For first-level shadow pages, role.quadrant can be 0 or 1 and denotes the
@@ -158,9 +158,9 @@ Shadow pages contain the following information:
     The page is invalid and should not be used.  It is a root page that is
     currently pinned (by a cpu hardware register pointing to it); once it is
     unpinned it will be destroyed.
-  role.cr4_pae:
-    Contains the value of cr4.pae for which the page is valid (e.g. whether
-    32-bit or 64-bit gptes are in use).
+  role.gpte_is_8_bytes:
+    Reflects the size of the guest PTE for which the page is valid, i.e. '1'
+    if 64-bit gptes are in use, '0' if 32-bit gptes are in use.
   role.nxe:
     Contains the value of efer.nxe for which the page is valid.
   role.cr0_wp:
@@ -173,6 +173,9 @@ Shadow pages contain the following information:
     Contains the value of cr4.smap && !cr0.wp for which the page is valid
     (pages for which this is true are different from other pages; see the
     treatment of cr0.wp=0 below).
+  role.ept_sp:
+    This is a virtual flag to denote a shadowed nested EPT page.  ept_sp
+    is true if "cr0_wp && smap_andnot_wp", an otherwise invalid combination.
   role.smm:
     Is 1 if the page is valid in system management mode.  This field
     determines which of the kvm_memslots array was used to build this
index e17ebf7..43b36db 100644 (file)
@@ -2356,7 +2356,7 @@ F:        arch/arm/mm/cache-uniphier.c
 F:     arch/arm64/boot/dts/socionext/uniphier*
 F:     drivers/bus/uniphier-system-bus.c
 F:     drivers/clk/uniphier/
-F:     drivers/dmaengine/uniphier-mdmac.c
+F:     drivers/dma/uniphier-mdmac.c
 F:     drivers/gpio/gpio-uniphier.c
 F:     drivers/i2c/busses/i2c-uniphier*
 F:     drivers/irqchip/irq-uniphier-aidet.c
@@ -6408,7 +6408,6 @@ L:        linux-kernel@vger.kernel.org
 T:     git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git locking/core
 S:     Maintained
 F:     kernel/futex.c
-F:     kernel/futex_compat.c
 F:     include/asm-generic/futex.h
 F:     include/linux/futex.h
 F:     include/uapi/linux/futex.h
@@ -8096,6 +8095,16 @@ F:       include/linux/iommu.h
 F:     include/linux/of_iommu.h
 F:     include/linux/iova.h
 
+IO_URING
+M:     Jens Axboe <axboe@kernel.dk>
+L:     linux-block@vger.kernel.org
+L:     linux-fsdevel@vger.kernel.org
+T:     git git://git.kernel.dk/linux-block
+T:     git git://git.kernel.dk/liburing
+S:     Maintained
+F:     fs/io_uring.c
+F:     include/uapi/linux/io_uring.h
+
 IP MASQUERADING
 M:     Juanjo Ciarlante <jjciarla@raiz.uncu.edu.ar>
 S:     Maintained
index 99c0530..026fbc4 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -2,7 +2,7 @@
 VERSION = 5
 PATCHLEVEL = 1
 SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc3
 NAME = Shy Crocodile
 
 # *DOCUMENTATION*
@@ -31,26 +31,12 @@ _all:
 # descending is started. They are now explicitly listed as the
 # prepare rule.
 
-# Ugly workaround for Debian make-kpkg:
-# make-kpkg directly includes the top Makefile of Linux kernel. In such a case,
-# skip sub-make to support debian_* targets in ruleset/kernel_version.mk, but
-# displays warning to discourage such abusage.
-ifneq ($(word 2, $(MAKEFILE_LIST)),)
-$(warning Do not include top Makefile of Linux Kernel)
-sub-make-done := 1
-MAKEFLAGS += -rR
-endif
-
-ifneq ($(sub-make-done),1)
+ifneq ($(sub_make_done),1)
 
 # Do not use make's built-in rules and variables
 # (this increases performance and avoids hard-to-debug behaviour)
 MAKEFLAGS += -rR
 
-# 'MAKEFLAGS += -rR' does not become immediately effective for old
-# GNU Make versions. Cancel implicit rules for this Makefile.
-$(lastword $(MAKEFILE_LIST)): ;
-
 # Avoid funny character set dependencies
 unexport LC_ALL
 LC_COLLATE=C
@@ -153,6 +139,7 @@ $(if $(KBUILD_OUTPUT),, \
 # 'sub-make' below.
 MAKEFLAGS += --include-dir=$(CURDIR)
 
+need-sub-make := 1
 else
 
 # Do not print "Entering directory ..." at all for in-tree build.
@@ -160,6 +147,18 @@ MAKEFLAGS += --no-print-directory
 
 endif # ifneq ($(KBUILD_OUTPUT),)
 
+ifneq ($(filter 3.%,$(MAKE_VERSION)),)
+# 'MAKEFLAGS += -rR' does not immediately become effective for GNU Make 3.x
+# We need to invoke sub-make to avoid implicit rules in the top Makefile.
+need-sub-make := 1
+# Cancel implicit rules for this Makefile.
+$(lastword $(MAKEFILE_LIST)): ;
+endif
+
+export sub_make_done := 1
+
+ifeq ($(need-sub-make),1)
+
 PHONY += $(MAKECMDGOALS) sub-make
 
 $(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make
@@ -167,12 +166,15 @@ $(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make
 
 # Invoke a second make in the output directory, passing relevant variables
 sub-make:
-       $(Q)$(MAKE) sub-make-done=1 \
+       $(Q)$(MAKE) \
        $(if $(KBUILD_OUTPUT),-C $(KBUILD_OUTPUT) KBUILD_SRC=$(CURDIR)) \
        -f $(CURDIR)/Makefile $(filter-out _all sub-make,$(MAKECMDGOALS))
 
-else # sub-make-done
+endif # need-sub-make
+endif # sub_make_done
+
 # We process the rest of the Makefile if this is the final invocation of make
+ifeq ($(need-sub-make),)
 
 # Do not print "Entering directory ...",
 # but we want to display it when entering to the output directory
@@ -497,7 +499,8 @@ outputmakefile:
 ifneq ($(KBUILD_SRC),)
        $(Q)ln -fsn $(srctree) source
        $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile $(srctree)
-       $(Q){ echo "# this is build directory, ignore it"; echo "*"; } > .gitignore
+       $(Q)test -e .gitignore || \
+       { echo "# this is build directory, ignore it"; echo "*"; } > .gitignore
 endif
 
 ifneq ($(shell $(CC) --version 2>&1 | head -n 1 | grep clang),)
@@ -677,7 +680,7 @@ KBUILD_CFLAGS       += $(call cc-disable-warning, format-overflow)
 KBUILD_CFLAGS  += $(call cc-disable-warning, int-in-bool-context)
 
 ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
-KBUILD_CFLAGS  += $(call cc-option,-Oz,-Os)
+KBUILD_CFLAGS  += -Os
 else
 KBUILD_CFLAGS   += -O2
 endif
@@ -950,9 +953,11 @@ mod_sign_cmd = true
 endif
 export mod_sign_cmd
 
+HOST_LIBELF_LIBS = $(shell pkg-config libelf --libs 2>/dev/null || echo -lelf)
+
 ifdef CONFIG_STACK_VALIDATION
   has_libelf := $(call try-run,\
-               echo "int main() {}" | $(HOSTCC) -xc -o /dev/null -lelf -,1,0)
+               echo "int main() {}" | $(HOSTCC) -xc -o /dev/null $(HOST_LIBELF_LIBS) -,1,0)
   ifeq ($(has_libelf),1)
     objtool_target := tools/objtool FORCE
   else
@@ -1757,7 +1762,7 @@ existing-targets := $(wildcard $(sort $(targets)))
 
 endif   # ifeq ($(config-targets),1)
 endif   # ifeq ($(mixed-targets),1)
-endif   # sub-make-done
+endif   # need-sub-make
 
 PHONY += FORCE
 FORCE:
index dc0ab28..70b7833 100644 (file)
@@ -6,6 +6,7 @@ generic-y += exec.h
 generic-y += export.h
 generic-y += fb.h
 generic-y += irq_work.h
+generic-y += kvm_para.h
 generic-y += mcs_spinlock.h
 generic-y += mm-arch-hooks.h
 generic-y += preempt.h
diff --git a/arch/alpha/include/uapi/asm/kvm_para.h b/arch/alpha/include/uapi/asm/kvm_para.h
deleted file mode 100644 (file)
index baacc49..0000000
+++ /dev/null
@@ -1,2 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
-#include <asm-generic/kvm_para.h>
index df55672..c781e45 100644 (file)
@@ -144,11 +144,11 @@ config ARC_CPU_770
          Support for ARC770 core introduced with Rel 4.10 (Summer 2011)
          This core has a bunch of cool new features:
          -MMU-v3: Variable Page Sz (4k, 8k, 16k), bigger J-TLB (128x4)
-                   Shared Address Spaces (for sharing TLB entries in MMU)
+                  Shared Address Spaces (for sharing TLB entries in MMU)
          -Caches: New Prog Model, Region Flush
          -Insns: endian swap, load-locked/store-conditional, time-stamp-ctr
 
-endif  #ISA_ARCOMPACT
+endif #ISA_ARCOMPACT
 
 config ARC_CPU_HS
        bool "ARC-HS"
@@ -198,7 +198,7 @@ config ARC_SMP_HALT_ON_RESET
          at designated entry point. For other case, all jump to common
          entry point and spin wait for Master's signal.
 
-endif  #SMP
+endif #SMP
 
 config ARC_MCIP
        bool "ARConnect Multicore IP (MCIP) Support "
@@ -249,7 +249,7 @@ config ARC_CACHE_VIPT_ALIASING
        bool "Support VIPT Aliasing D$"
        depends on ARC_HAS_DCACHE && ISA_ARCOMPACT
 
-endif  #ARC_CACHE
+endif #ARC_CACHE
 
 config ARC_HAS_ICCM
        bool "Use ICCM"
@@ -370,7 +370,7 @@ config ARC_FPU_SAVE_RESTORE
          based on actual usage of FPU by a task. Thus our implemn does
          this for all tasks in system.
 
-endif  #ISA_ARCOMPACT
+endif #ISA_ARCOMPACT
 
 config ARC_CANT_LLSC
        def_bool n
@@ -386,6 +386,15 @@ config ARC_HAS_SWAPE
 
 if ISA_ARCV2
 
+config ARC_USE_UNALIGNED_MEM_ACCESS
+       bool "Enable unaligned access in HW"
+       default y
+       select HAVE_EFFICIENT_UNALIGNED_ACCESS
+       help
+         The ARC HS architecture supports unaligned memory access
+         which is disabled by default. Enable unaligned access in
+         hardware and use software to use it
+
 config ARC_HAS_LL64
        bool "Insn: 64bit LDD/STD"
        help
@@ -414,7 +423,7 @@ config ARC_IRQ_NO_AUTOSAVE
          This is programmable and can be optionally disabled in which case
          software INTERRUPT_PROLOGUE/EPILGUE do the needed work
 
-endif  # ISA_ARCV2
+endif # ISA_ARCV2
 
 endmenu   # "ARC CPU Configuration"
 
index df00578..e2b991f 100644 (file)
@@ -28,6 +28,12 @@ cflags-$(CONFIG_ARC_HAS_SWAPE)               += -mswape
 
 ifdef CONFIG_ISA_ARCV2
 
+ifdef CONFIG_ARC_USE_UNALIGNED_MEM_ACCESS
+cflags-y                               += -munaligned-access
+else
+cflags-y                               += -mno-unaligned-access
+endif
+
 ifndef CONFIG_ARC_HAS_LL64
 cflags-y                               += -mno-ll64
 endif
index 02410b2..c0bcd97 100644 (file)
@@ -38,7 +38,7 @@
                        clock-div = <6>;
                };
 
-               iomux: iomux@FF10601c {
+               iomux: iomux@ff10601c {
                        /* Port 1 */
                        pctl_tsin_s0: pctl-tsin-s0 {   /* Serial TS-in 0 */
                                abilis,function = "mis0";
                        };
                };
 
-               gpioa: gpio@FF140000 {
+               gpioa: gpio@ff140000 {
                        compatible = "abilis,tb10x-gpio";
                        interrupt-controller;
                        #interrupt-cells = <1>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <27 2>;
-                       reg = <0xFF140000 0x1000>;
+                       reg = <0xff140000 0x1000>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        abilis,ngpio = <3>;
                        gpio-ranges = <&iomux 0 0 0>;
                        gpio-ranges-group-names = "gpioa";
                };
-               gpiob: gpio@FF141000 {
+               gpiob: gpio@ff141000 {
                        compatible = "abilis,tb10x-gpio";
                        interrupt-controller;
                        #interrupt-cells = <1>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <27 2>;
-                       reg = <0xFF141000 0x1000>;
+                       reg = <0xff141000 0x1000>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        abilis,ngpio = <2>;
                        gpio-ranges = <&iomux 0 0 0>;
                        gpio-ranges-group-names = "gpiob";
                };
-               gpioc: gpio@FF142000 {
+               gpioc: gpio@ff142000 {
                        compatible = "abilis,tb10x-gpio";
                        interrupt-controller;
                        #interrupt-cells = <1>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <27 2>;
-                       reg = <0xFF142000 0x1000>;
+                       reg = <0xff142000 0x1000>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        abilis,ngpio = <3>;
                        gpio-ranges = <&iomux 0 0 0>;
                        gpio-ranges-group-names = "gpioc";
                };
-               gpiod: gpio@FF143000 {
+               gpiod: gpio@ff143000 {
                        compatible = "abilis,tb10x-gpio";
                        interrupt-controller;
                        #interrupt-cells = <1>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <27 2>;
-                       reg = <0xFF143000 0x1000>;
+                       reg = <0xff143000 0x1000>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        abilis,ngpio = <2>;
                        gpio-ranges = <&iomux 0 0 0>;
                        gpio-ranges-group-names = "gpiod";
                };
-               gpioe: gpio@FF144000 {
+               gpioe: gpio@ff144000 {
                        compatible = "abilis,tb10x-gpio";
                        interrupt-controller;
                        #interrupt-cells = <1>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <27 2>;
-                       reg = <0xFF144000 0x1000>;
+                       reg = <0xff144000 0x1000>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        abilis,ngpio = <3>;
                        gpio-ranges = <&iomux 0 0 0>;
                        gpio-ranges-group-names = "gpioe";
                };
-               gpiof: gpio@FF145000 {
+               gpiof: gpio@ff145000 {
                        compatible = "abilis,tb10x-gpio";
                        interrupt-controller;
                        #interrupt-cells = <1>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <27 2>;
-                       reg = <0xFF145000 0x1000>;
+                       reg = <0xff145000 0x1000>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        abilis,ngpio = <2>;
                        gpio-ranges = <&iomux 0 0 0>;
                        gpio-ranges-group-names = "gpiof";
                };
-               gpiog: gpio@FF146000 {
+               gpiog: gpio@ff146000 {
                        compatible = "abilis,tb10x-gpio";
                        interrupt-controller;
                        #interrupt-cells = <1>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <27 2>;
-                       reg = <0xFF146000 0x1000>;
+                       reg = <0xff146000 0x1000>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        abilis,ngpio = <3>;
                        gpio-ranges = <&iomux 0 0 0>;
                        gpio-ranges-group-names = "gpiog";
                };
-               gpioh: gpio@FF147000 {
+               gpioh: gpio@ff147000 {
                        compatible = "abilis,tb10x-gpio";
                        interrupt-controller;
                        #interrupt-cells = <1>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <27 2>;
-                       reg = <0xFF147000 0x1000>;
+                       reg = <0xff147000 0x1000>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        abilis,ngpio = <2>;
                        gpio-ranges = <&iomux 0 0 0>;
                        gpio-ranges-group-names = "gpioh";
                };
-               gpioi: gpio@FF148000 {
+               gpioi: gpio@ff148000 {
                        compatible = "abilis,tb10x-gpio";
                        interrupt-controller;
                        #interrupt-cells = <1>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <27 2>;
-                       reg = <0xFF148000 0x1000>;
+                       reg = <0xff148000 0x1000>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        abilis,ngpio = <12>;
                        gpio-ranges = <&iomux 0 0 0>;
                        gpio-ranges-group-names = "gpioi";
                };
-               gpioj: gpio@FF149000 {
+               gpioj: gpio@ff149000 {
                        compatible = "abilis,tb10x-gpio";
                        interrupt-controller;
                        #interrupt-cells = <1>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <27 2>;
-                       reg = <0xFF149000 0x1000>;
+                       reg = <0xff149000 0x1000>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        abilis,ngpio = <32>;
                        gpio-ranges = <&iomux 0 0 0>;
                        gpio-ranges-group-names = "gpioj";
                };
-               gpiok: gpio@FF14a000 {
+               gpiok: gpio@ff14a000 {
                        compatible = "abilis,tb10x-gpio";
                        interrupt-controller;
                        #interrupt-cells = <1>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <27 2>;
-                       reg = <0xFF14A000 0x1000>;
+                       reg = <0xff14a000 0x1000>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        abilis,ngpio = <22>;
                        gpio-ranges = <&iomux 0 0 0>;
                        gpio-ranges-group-names = "gpiok";
                };
-               gpiol: gpio@FF14b000 {
+               gpiol: gpio@ff14b000 {
                        compatible = "abilis,tb10x-gpio";
                        interrupt-controller;
                        #interrupt-cells = <1>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <27 2>;
-                       reg = <0xFF14B000 0x1000>;
+                       reg = <0xff14b000 0x1000>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        abilis,ngpio = <4>;
                        gpio-ranges = <&iomux 0 0 0>;
                        gpio-ranges-group-names = "gpiol";
                };
-               gpiom: gpio@FF14c000 {
+               gpiom: gpio@ff14c000 {
                        compatible = "abilis,tb10x-gpio";
                        interrupt-controller;
                        #interrupt-cells = <1>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <27 2>;
-                       reg = <0xFF14C000 0x1000>;
+                       reg = <0xff14c000 0x1000>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        abilis,ngpio = <4>;
                        gpio-ranges = <&iomux 0 0 0>;
                        gpio-ranges-group-names = "gpiom";
                };
-               gpion: gpio@FF14d000 {
+               gpion: gpio@ff14d000 {
                        compatible = "abilis,tb10x-gpio";
                        interrupt-controller;
                        #interrupt-cells = <1>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <27 2>;
-                       reg = <0xFF14D000 0x1000>;
+                       reg = <0xff14d000 0x1000>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        abilis,ngpio = <5>;
index 3acf04d..c968e67 100644 (file)
        };
 
        soc100 {
-               uart@FF100000 {
+               uart@ff100000 {
                        pinctrl-names = "default";
                        pinctrl-0 = <&pctl_uart0>;
                };
-               ethernet@FE100000 {
+               ethernet@fe100000 {
                        phy-mode = "rgmii";
                };
 
-               i2c0: i2c@FF120000 {
+               i2c0: i2c@ff120000 {
                        i2c-sda-hold-time-ns = <432>;
                };
-               i2c1: i2c@FF121000 {
+               i2c1: i2c@ff121000 {
                        i2c-sda-hold-time-ns = <432>;
                };
-               i2c2: i2c@FF122000 {
+               i2c2: i2c@ff122000 {
                        i2c-sda-hold-time-ns = <432>;
                };
-               i2c3: i2c@FF123000 {
+               i2c3: i2c@ff123000 {
                        i2c-sda-hold-time-ns = <432>;
                };
-               i2c4: i2c@FF124000 {
+               i2c4: i2c@ff124000 {
                        i2c-sda-hold-time-ns = <432>;
                };
 
index f9e7686..6a1615f 100644 (file)
@@ -38,7 +38,7 @@
                        clock-div = <6>;
                };
 
-               iomux: iomux@FF10601c {
+               iomux: iomux@ff10601c {
                        /* Port 1 */
                        pctl_tsin_s0: pctl-tsin-s0 {   /* Serial TS-in 0 */
                                abilis,function = "mis0";
                        };
                };
 
-               gpioa: gpio@FF140000 {
+               gpioa: gpio@ff140000 {
                        compatible = "abilis,tb10x-gpio";
                        interrupt-controller;
                        #interrupt-cells = <1>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <27 2>;
-                       reg = <0xFF140000 0x1000>;
+                       reg = <0xff140000 0x1000>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        abilis,ngpio = <3>;
                        gpio-ranges = <&iomux 0 0 0>;
                        gpio-ranges-group-names = "gpioa";
                };
-               gpiob: gpio@FF141000 {
+               gpiob: gpio@ff141000 {
                        compatible = "abilis,tb10x-gpio";
                        interrupt-controller;
                        #interrupt-cells = <1>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <27 2>;
-                       reg = <0xFF141000 0x1000>;
+                       reg = <0xff141000 0x1000>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        abilis,ngpio = <2>;
                        gpio-ranges = <&iomux 0 0 0>;
                        gpio-ranges-group-names = "gpiob";
                };
-               gpioc: gpio@FF142000 {
+               gpioc: gpio@ff142000 {
                        compatible = "abilis,tb10x-gpio";
                        interrupt-controller;
                        #interrupt-cells = <1>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <27 2>;
-                       reg = <0xFF142000 0x1000>;
+                       reg = <0xff142000 0x1000>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        abilis,ngpio = <3>;
                        gpio-ranges = <&iomux 0 0 0>;
                        gpio-ranges-group-names = "gpioc";
                };
-               gpiod: gpio@FF143000 {
+               gpiod: gpio@ff143000 {
                        compatible = "abilis,tb10x-gpio";
                        interrupt-controller;
                        #interrupt-cells = <1>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <27 2>;
-                       reg = <0xFF143000 0x1000>;
+                       reg = <0xff143000 0x1000>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        abilis,ngpio = <2>;
                        gpio-ranges = <&iomux 0 0 0>;
                        gpio-ranges-group-names = "gpiod";
                };
-               gpioe: gpio@FF144000 {
+               gpioe: gpio@ff144000 {
                        compatible = "abilis,tb10x-gpio";
                        interrupt-controller;
                        #interrupt-cells = <1>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <27 2>;
-                       reg = <0xFF144000 0x1000>;
+                       reg = <0xff144000 0x1000>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        abilis,ngpio = <3>;
                        gpio-ranges = <&iomux 0 0 0>;
                        gpio-ranges-group-names = "gpioe";
                };
-               gpiof: gpio@FF145000 {
+               gpiof: gpio@ff145000 {
                        compatible = "abilis,tb10x-gpio";
                        interrupt-controller;
                        #interrupt-cells = <1>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <27 2>;
-                       reg = <0xFF145000 0x1000>;
+                       reg = <0xff145000 0x1000>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        abilis,ngpio = <2>;
                        gpio-ranges = <&iomux 0 0 0>;
                        gpio-ranges-group-names = "gpiof";
                };
-               gpiog: gpio@FF146000 {
+               gpiog: gpio@ff146000 {
                        compatible = "abilis,tb10x-gpio";
                        interrupt-controller;
                        #interrupt-cells = <1>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <27 2>;
-                       reg = <0xFF146000 0x1000>;
+                       reg = <0xff146000 0x1000>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        abilis,ngpio = <3>;
                        gpio-ranges = <&iomux 0 0 0>;
                        gpio-ranges-group-names = "gpiog";
                };
-               gpioh: gpio@FF147000 {
+               gpioh: gpio@ff147000 {
                        compatible = "abilis,tb10x-gpio";
                        interrupt-controller;
                        #interrupt-cells = <1>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <27 2>;
-                       reg = <0xFF147000 0x1000>;
+                       reg = <0xff147000 0x1000>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        abilis,ngpio = <2>;
                        gpio-ranges = <&iomux 0 0 0>;
                        gpio-ranges-group-names = "gpioh";
                };
-               gpioi: gpio@FF148000 {
+               gpioi: gpio@ff148000 {
                        compatible = "abilis,tb10x-gpio";
                        interrupt-controller;
                        #interrupt-cells = <1>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <27 2>;
-                       reg = <0xFF148000 0x1000>;
+                       reg = <0xff148000 0x1000>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        abilis,ngpio = <12>;
                        gpio-ranges = <&iomux 0 0 0>;
                        gpio-ranges-group-names = "gpioi";
                };
-               gpioj: gpio@FF149000 {
+               gpioj: gpio@ff149000 {
                        compatible = "abilis,tb10x-gpio";
                        interrupt-controller;
                        #interrupt-cells = <1>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <27 2>;
-                       reg = <0xFF149000 0x1000>;
+                       reg = <0xff149000 0x1000>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        abilis,ngpio = <32>;
                        gpio-ranges = <&iomux 0 0 0>;
                        gpio-ranges-group-names = "gpioj";
                };
-               gpiok: gpio@FF14a000 {
+               gpiok: gpio@ff14a000 {
                        compatible = "abilis,tb10x-gpio";
                        interrupt-controller;
                        #interrupt-cells = <1>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <27 2>;
-                       reg = <0xFF14A000 0x1000>;
+                       reg = <0xff14a000 0x1000>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        abilis,ngpio = <22>;
                        gpio-ranges = <&iomux 0 0 0>;
                        gpio-ranges-group-names = "gpiok";
                };
-               gpiol: gpio@FF14b000 {
+               gpiol: gpio@ff14b000 {
                        compatible = "abilis,tb10x-gpio";
                        interrupt-controller;
                        #interrupt-cells = <1>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <27 2>;
-                       reg = <0xFF14B000 0x1000>;
+                       reg = <0xff14b000 0x1000>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        abilis,ngpio = <4>;
                        gpio-ranges = <&iomux 0 0 0>;
                        gpio-ranges-group-names = "gpiol";
                };
-               gpiom: gpio@FF14c000 {
+               gpiom: gpio@ff14c000 {
                        compatible = "abilis,tb10x-gpio";
                        interrupt-controller;
                        #interrupt-cells = <1>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <27 2>;
-                       reg = <0xFF14C000 0x1000>;
+                       reg = <0xff14c000 0x1000>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        abilis,ngpio = <4>;
                        gpio-ranges = <&iomux 0 0 0>;
                        gpio-ranges-group-names = "gpiom";
                };
-               gpion: gpio@FF14d000 {
+               gpion: gpio@ff14d000 {
                        compatible = "abilis,tb10x-gpio";
                        interrupt-controller;
                        #interrupt-cells = <1>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <27 2>;
-                       reg = <0xFF14D000 0x1000>;
+                       reg = <0xff14d000 0x1000>;
                        gpio-controller;
                        #gpio-cells = <2>;
                        abilis,ngpio = <5>;
index 37d88c5..05143ce 100644 (file)
        };
 
        soc100 {
-               uart@FF100000 {
+               uart@ff100000 {
                        pinctrl-names = "default";
                        pinctrl-0 = <&pctl_uart0>;
                };
-               ethernet@FE100000 {
+               ethernet@fe100000 {
                        phy-mode = "rgmii";
                };
 
-               i2c0: i2c@FF120000 {
+               i2c0: i2c@ff120000 {
                        i2c-sda-hold-time-ns = <432>;
                };
-               i2c1: i2c@FF121000 {
+               i2c1: i2c@ff121000 {
                        i2c-sda-hold-time-ns = <432>;
                };
-               i2c2: i2c@FF122000 {
+               i2c2: i2c@ff122000 {
                        i2c-sda-hold-time-ns = <432>;
                };
-               i2c3: i2c@FF123000 {
+               i2c3: i2c@ff123000 {
                        i2c-sda-hold-time-ns = <432>;
                };
-               i2c4: i2c@FF124000 {
+               i2c4: i2c@ff124000 {
                        i2c-sda-hold-time-ns = <432>;
                };
 
index 3121536..2fbf1bd 100644 (file)
@@ -54,7 +54,7 @@
                #size-cells     = <1>;
                device_type     = "soc";
                ranges          = <0xfe000000 0xfe000000 0x02000000
-                               0x000F0000 0x000F0000 0x00010000>;
+                               0x000f0000 0x000f0000 0x00010000>;
                compatible      = "abilis,tb10x", "simple-bus";
 
                pll0: oscillator {
                        clock-output-names = "ahb_clk";
                };
 
-               iomux: iomux@FF10601c {
+               iomux: iomux@ff10601c {
                        compatible = "abilis,tb10x-iomux";
                        #gpio-range-cells = <3>;
-                       reg = <0xFF10601c 0x4>;
+                       reg = <0xff10601c 0x4>;
                };
 
                intc: interrupt-controller {
@@ -88,7 +88,7 @@
                };
                tb10x_ictl: pic@fe002000 {
                        compatible = "abilis,tb10x-ictl";
-                       reg = <0xFE002000 0x20>;
+                       reg = <0xfe002000 0x20>;
                        interrupt-controller;
                        #interrupt-cells = <2>;
                        interrupt-parent = <&intc>;
                                        20 21 22 23 24 25 26 27 28 29 30 31>;
                };
 
-               uart@FF100000 {
+               uart@ff100000 {
                        compatible = "snps,dw-apb-uart";
-                       reg = <0xFF100000 0x100>;
+                       reg = <0xff100000 0x100>;
                        clock-frequency = <166666666>;
                        interrupts = <25 8>;
                        reg-shift = <2>;
                        reg-io-width = <4>;
                        interrupt-parent = <&tb10x_ictl>;
                };
-               ethernet@FE100000 {
+               ethernet@fe100000 {
                        compatible = "snps,dwmac-3.70a","snps,dwmac";
-                       reg = <0xFE100000 0x1058>;
+                       reg = <0xfe100000 0x1058>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <6 8>;
                        interrupt-names = "macirq";
                        clocks = <&ahb_clk>;
                        clock-names = "stmmaceth";
                };
-               dma@FE000000 {
+               dma@fe000000 {
                        compatible = "snps,dma-spear1340";
-                       reg = <0xFE000000 0x400>;
+                       reg = <0xfe000000 0x400>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <14 8>;
                        dma-channels = <6>;
                        multi-block = <1 1 1 1 1 1>;
                };
 
-               i2c0: i2c@FF120000 {
+               i2c0: i2c@ff120000 {
                        #address-cells = <1>;
                        #size-cells = <0>;
                        compatible = "snps,designware-i2c";
-                       reg = <0xFF120000 0x1000>;
+                       reg = <0xff120000 0x1000>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <12 8>;
                        clocks = <&ahb_clk>;
                };
-               i2c1: i2c@FF121000 {
+               i2c1: i2c@ff121000 {
                        #address-cells = <1>;
                        #size-cells = <0>;
                        compatible = "snps,designware-i2c";
-                       reg = <0xFF121000 0x1000>;
+                       reg = <0xff121000 0x1000>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <12 8>;
                        clocks = <&ahb_clk>;
                };
-               i2c2: i2c@FF122000 {
+               i2c2: i2c@ff122000 {
                        #address-cells = <1>;
                        #size-cells = <0>;
                        compatible = "snps,designware-i2c";
-                       reg = <0xFF122000 0x1000>;
+                       reg = <0xff122000 0x1000>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <12 8>;
                        clocks = <&ahb_clk>;
                };
-               i2c3: i2c@FF123000 {
+               i2c3: i2c@ff123000 {
                        #address-cells = <1>;
                        #size-cells = <0>;
                        compatible = "snps,designware-i2c";
-                       reg = <0xFF123000 0x1000>;
+                       reg = <0xff123000 0x1000>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <12 8>;
                        clocks = <&ahb_clk>;
                };
-               i2c4: i2c@FF124000 {
+               i2c4: i2c@ff124000 {
                        #address-cells = <1>;
                        #size-cells = <0>;
                        compatible = "snps,designware-i2c";
-                       reg = <0xFF124000 0x1000>;
+                       reg = <0xff124000 0x1000>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <12 8>;
                        clocks = <&ahb_clk>;
                };
 
-               spi0: spi@0xFE010000 {
+               spi0: spi@fe010000 {
                        #address-cells = <1>;
                        #size-cells = <0>;
                        cell-index = <0>;
                        compatible = "abilis,tb100-spi";
                        num-cs = <1>;
-                       reg = <0xFE010000 0x20>;
+                       reg = <0xfe010000 0x20>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <26 8>;
                        clocks = <&ahb_clk>;
                };
-               spi1: spi@0xFE011000 {
+               spi1: spi@fe011000 {
                        #address-cells = <1>;
                        #size-cells = <0>;
                        cell-index = <1>;
                        compatible = "abilis,tb100-spi";
                        num-cs = <2>;
-                       reg = <0xFE011000 0x20>;
+                       reg = <0xfe011000 0x20>;
                        interrupt-parent = <&tb10x_ictl>;
                        interrupts = <10 8>;
                        clocks = <&ahb_clk>;
                        interrupts = <20 2>, <19 2>;
                        interrupt-names = "cmd_irq", "event_irq";
                };
-               tb10x_mdsc0: tb10x-mdscr@FF300000 {
+               tb10x_mdsc0: tb10x-mdscr@ff300000 {
                        compatible = "abilis,tb100-mdscr";
-                       reg = <0xFF300000 0x7000>;
+                       reg = <0xff300000 0x7000>;
                        tb100-mdscr-manage-tsin;
                };
-               tb10x_mscr0: tb10x-mdscr@FF307000 {
+               tb10x_mscr0: tb10x-mdscr@ff307000 {
                        compatible = "abilis,tb100-mdscr";
-                       reg = <0xFF307000 0x7000>;
+                       reg = <0xff307000 0x7000>;
                };
                tb10x_scr0: tb10x-mdscr@ff30e000 {
                        compatible = "abilis,tb100-mdscr";
-                       reg = <0xFF30e000 0x4000>;
+                       reg = <0xff30e000 0x4000>;
                        tb100-mdscr-manage-tsin;
                };
                tb10x_scr1: tb10x-mdscr@ff312000 {
                        compatible = "abilis,tb100-mdscr";
-                       reg = <0xFF312000 0x4000>;
+                       reg = <0xff312000 0x4000>;
                        tb100-mdscr-manage-tsin;
                };
                tb10x_wfb: tb10x-wfb@ff319000 {
index fdc2665..37be3bf 100644 (file)
@@ -41,7 +41,7 @@
                 * this GPIO block ORs all interrupts on CPU card (creg,..)
                 * to uplink only 1 IRQ to ARC core intc
                 */
-               dw-apb-gpio@0x2000 {
+               dw-apb-gpio@2000 {
                        compatible = "snps,dw-apb-gpio";
                        reg = < 0x2000 0x80 >;
                        #address-cells = <1>;
@@ -60,7 +60,7 @@
                        };
                };
 
-               debug_uart: dw-apb-uart@0x5000 {
+               debug_uart: dw-apb-uart@5000 {
                        compatible = "snps,dw-apb-uart";
                        reg = <0x5000 0x100>;
                        clock-frequency = <33333000>;
@@ -88,7 +88,7 @@
         * avoid duplicating the MB dtsi file given that IRQ from
         * this intc to cpu intc are different for axs101 and axs103
         */
-       mb_intc: dw-apb-ictl@0xe0012000 {
+       mb_intc: dw-apb-ictl@e0012000 {
                #interrupt-cells = <1>;
                compatible = "snps,dw-apb-ictl";
                reg = < 0x0 0xe0012000 0x0 0x200 >;
index d75d65d..effa375 100644 (file)
@@ -55,7 +55,7 @@
                 * this GPIO block ORs all interrupts on CPU card (creg,..)
                 * to uplink only 1 IRQ to ARC core intc
                 */
-               dw-apb-gpio@0x2000 {
+               dw-apb-gpio@2000 {
                        compatible = "snps,dw-apb-gpio";
                        reg = < 0x2000 0x80 >;
                        #address-cells = <1>;
@@ -74,7 +74,7 @@
                        };
                };
 
-               debug_uart: dw-apb-uart@0x5000 {
+               debug_uart: dw-apb-uart@5000 {
                        compatible = "snps,dw-apb-uart";
                        reg = <0x5000 0x100>;
                        clock-frequency = <33333000>;
         * external DMA buffer located outside of IOC aperture.
         */
        axs10x_mb {
-               ethernet@0x18000 {
+               ethernet@18000 {
                        dma-coherent;
                };
 
-               ehci@0x40000 {
+               ehci@40000 {
                        dma-coherent;
                };
 
-               ohci@0x60000 {
+               ohci@60000 {
                        dma-coherent;
                };
 
-               mmc@0x15000 {
+               mmc@15000 {
                        dma-coherent;
                };
        };
         * avoid duplicating the MB dtsi file given that IRQ from
         * this intc to cpu intc are different for axs101 and axs103
         */
-       mb_intc: dw-apb-ictl@0xe0012000 {
+       mb_intc: dw-apb-ictl@e0012000 {
                #interrupt-cells = <1>;
                compatible = "snps,dw-apb-ictl";
                reg = < 0x0 0xe0012000 0x0 0x200 >;
                #size-cells = <2>;
                ranges;
                /*
-                * Move frame buffer out of IOC aperture (0x8z-0xAz).
+                * Move frame buffer out of IOC aperture (0x8z-0xaz).
                 */
                frame_buffer: frame_buffer@be000000 {
                        compatible = "shared-dma-pool";
index a05bb73..e401e59 100644 (file)
@@ -62,7 +62,7 @@
                 * this GPIO block ORs all interrupts on CPU card (creg,..)
                 * to uplink only 1 IRQ to ARC core intc
                 */
-               dw-apb-gpio@0x2000 {
+               dw-apb-gpio@2000 {
                        compatible = "snps,dw-apb-gpio";
                        reg = < 0x2000 0x80 >;
                        #address-cells = <1>;
@@ -81,7 +81,7 @@
                        };
                };
 
-               debug_uart: dw-apb-uart@0x5000 {
+               debug_uart: dw-apb-uart@5000 {
                        compatible = "snps,dw-apb-uart";
                        reg = <0x5000 0x100>;
                        clock-frequency = <33333000>;
         * external DMA buffer located outside of IOC aperture.
         */
        axs10x_mb {
-               ethernet@0x18000 {
+               ethernet@18000 {
                        dma-coherent;
                };
 
-               ehci@0x40000 {
+               ehci@40000 {
                        dma-coherent;
                };
 
-               ohci@0x60000 {
+               ohci@60000 {
                        dma-coherent;
                };
 
-               mmc@0x15000 {
+               mmc@15000 {
                        dma-coherent;
                };
        };
         * avoid duplicating the MB dtsi file given that IRQ from
         * this intc to cpu intc are different for axs101 and axs103
         */
-       mb_intc: dw-apb-ictl@0xe0012000 {
+       mb_intc: dw-apb-ictl@e0012000 {
                #interrupt-cells = <1>;
                compatible = "snps,dw-apb-ictl";
                reg = < 0x0 0xe0012000 0x0 0x200 >;
                #size-cells = <2>;
                ranges;
                /*
-                * Move frame buffer out of IOC aperture (0x8z-0xAz).
+                * Move frame buffer out of IOC aperture (0x8z-0xaz).
                 */
                frame_buffer: frame_buffer@be000000 {
                        compatible = "shared-dma-pool";
index 37bafd4..4ead6dc 100644 (file)
@@ -72,7 +72,7 @@
                        };
                };
 
-               gmac: ethernet@0x18000 {
+               gmac: ethernet@18000 {
                        #interrupt-cells = <1>;
                        compatible = "snps,dwmac";
                        reg = < 0x18000 0x2000 >;
                        mac-address = [00 00 00 00 00 00]; /* Filled in by U-Boot */
                };
 
-               ehci@0x40000 {
+               ehci@40000 {
                        compatible = "generic-ehci";