dscc4.setup= [NET]
+ dt_cpu_ftrs= [PPC]
+ Format: {"off" | "known"}
+ Control how the dt_cpu_ftrs device-tree binding is
+ used for CPU feature discovery and setup (if it
+ exists).
+ off: Do not use it, fall back to legacy cpu table.
+ known: Do not pass through unknown features to guests
+ or userspace, only those that the kernel is aware of.
+
dump_apple_properties [X86]
Dump name and content of EFI device properties on
x86 Macs. Useful for driver authors to determine
- interrupt-controller : Indicates the switch is itself an interrupt
controller. This is used for the PHY interrupts.
#interrupt-cells = <2> : Controller uses two cells, number and flag
+- eeprom-length : Set to the length of an EEPROM connected to the
+ switch. Must be set if the switch can not detect
+ the presence and/or size of a connected EEPROM,
+ otherwise optional.
- mdio : Container of PHY and devices on the switches MDIO
bus.
- mdio? : Container of PHYs and devices on the external MDIO
- "rockchip,rk3288-usb", "rockchip,rk3066-usb", "snps,dwc2": for rk3288 Soc;
- "lantiq,arx100-usb": The DWC2 USB controller instance in Lantiq ARX SoCs;
- "lantiq,xrx200-usb": The DWC2 USB controller instance in Lantiq XRX SoCs;
+ - "amlogic,meson8-usb": The DWC2 USB controller instance in Amlogic Meson8 SoCs;
- "amlogic,meson8b-usb": The DWC2 USB controller instance in Amlogic Meson8b SoCs;
- "amlogic,meson-gxbb-usb": The DWC2 USB controller instance in Amlogic S905 SoCs;
- "amcc,dwc-otg": The DWC2 USB controller instance in AMCC Canyonlands 460EX SoCs;
--- /dev/null
+The QorIQ DPAA Ethernet Driver
+==============================
+
+Authors:
+Madalin Bucur <madalin.bucur@nxp.com>
+Camelia Groza <camelia.groza@nxp.com>
+
+Contents
+========
+
+ - DPAA Ethernet Overview
+ - DPAA Ethernet Supported SoCs
+ - Configuring DPAA Ethernet in your kernel
+ - DPAA Ethernet Frame Processing
+ - DPAA Ethernet Features
+ - Debugging
+
+DPAA Ethernet Overview
+======================
+
+DPAA stands for Data Path Acceleration Architecture and it is a
+set of networking acceleration IPs that are available on several
+generations of SoCs, both on PowerPC and ARM64.
+
+The Freescale DPAA architecture consists of a series of hardware blocks
+that support Ethernet connectivity. The Ethernet driver depends upon the
+following drivers in the Linux kernel:
+
+ - Peripheral Access Memory Unit (PAMU) (* needed only for PPC platforms)
+ drivers/iommu/fsl_*
+ - Frame Manager (FMan)
+ drivers/net/ethernet/freescale/fman
+ - Queue Manager (QMan), Buffer Manager (BMan)
+ drivers/soc/fsl/qbman
+
+A simplified view of the dpaa_eth interfaces mapped to FMan MACs:
+
+ dpaa_eth /eth0\ ... /ethN\
+ driver | | | |
+ ------------- ---- ----------- ---- -------------
+ -Ports / Tx Rx \ ... / Tx Rx \
+ FMan | | | |
+ -MACs | MAC0 | | MACN |
+ / dtsec0 \ ... / dtsecN \ (or tgec)
+ / \ / \(or memac)
+ --------- -------------- --- -------------- ---------
+ FMan, FMan Port, FMan SP, FMan MURAM drivers
+ ---------------------------------------------------------
+ FMan HW blocks: MURAM, MACs, Ports, SP
+ ---------------------------------------------------------
+
+The dpaa_eth relation to the QMan, BMan and FMan:
+ ________________________________
+ dpaa_eth / eth0 \
+ driver / \
+ --------- -^- -^- -^- --- ---------
+ QMan driver / \ / \ / \ \ / | BMan |
+ |Rx | |Rx | |Tx | |Tx | | driver |
+ --------- |Dfl| |Err| |Cnf| |FQs| | |
+ QMan HW |FQ | |FQ | |FQs| | | | |
+ / \ / \ / \ \ / | |
+ --------- --- --- --- -v- ---------
+ | FMan QMI | |
+ | FMan HW FMan BMI | BMan HW |
+ ----------------------- --------
+
+where the acronyms used above (and in the code) are:
+DPAA = Data Path Acceleration Architecture
+FMan = DPAA Frame Manager
+QMan = DPAA Queue Manager
+BMan = DPAA Buffers Manager
+QMI = QMan interface in FMan
+BMI = BMan interface in FMan
+FMan SP = FMan Storage Profiles
+MURAM = Multi-user RAM in FMan
+FQ = QMan Frame Queue
+Rx Dfl FQ = default reception FQ
+Rx Err FQ = Rx error frames FQ
+Tx Cnf FQ = Tx confirmation FQs
+Tx FQs = transmission frame queues
+dtsec = datapath three speed Ethernet controller (10/100/1000 Mbps)
+tgec = ten gigabit Ethernet controller (10 Gbps)
+memac = multirate Ethernet MAC (10/100/1000/10000)
+
+DPAA Ethernet Supported SoCs
+============================
+
+The DPAA drivers enable the Ethernet controllers present on the following SoCs:
+
+# PPC
+P1023
+P2041
+P3041
+P4080
+P5020
+P5040
+T1023
+T1024
+T1040
+T1042
+T2080
+T4240
+B4860
+
+# ARM
+LS1043A
+LS1046A
+
+Configuring DPAA Ethernet in your kernel
+========================================
+
+To enable the DPAA Ethernet driver, the following Kconfig options are required:
+
+# common for arch/arm64 and arch/powerpc platforms
+CONFIG_FSL_DPAA=y
+CONFIG_FSL_FMAN=y
+CONFIG_FSL_DPAA_ETH=y
+CONFIG_FSL_XGMAC_MDIO=y
+
+# for arch/powerpc only
+CONFIG_FSL_PAMU=y
+
+# common options needed for the PHYs used on the RDBs
+CONFIG_VITESSE_PHY=y
+CONFIG_REALTEK_PHY=y
+CONFIG_AQUANTIA_PHY=y
+
+DPAA Ethernet Frame Processing
+==============================
+
+On Rx, buffers for the incoming frames are retrieved from one of the three
+existing buffers pools. The driver initializes and seeds these, each with
+buffers of different sizes: 1KB, 2KB and 4KB.
+
+On Tx, all transmitted frames are returned to the driver through Tx
+confirmation frame queues. The driver is then responsible for freeing the
+buffers. In order to do this properly, a backpointer is added to the buffer
+before transmission that points to the skb. When the buffer returns to the
+driver on a confirmation FQ, the skb can be correctly consumed.
+
+DPAA Ethernet Features
+======================
+
+Currently the DPAA Ethernet driver enables the basic features required for
+a Linux Ethernet driver. The support for advanced features will be added
+gradually.
+
+The driver has Rx and Tx checksum offloading for UDP and TCP. Currently the Rx
+checksum offload feature is enabled by default and cannot be controlled through
+ethtool.
+
+The driver has support for multiple prioritized Tx traffic classes. Priorities
+range from 0 (lowest) to 3 (highest). These are mapped to HW workqueues with
+strict priority levels. Each traffic class contains NR_CPU TX queues. By
+default, only one traffic class is enabled and the lowest priority Tx queues
+are used. Higher priority traffic classes can be enabled with the mqprio
+qdisc. For example, all four traffic classes are enabled on an interface with
+the following command. Furthermore, skb priority levels are mapped to traffic
+classes as follows:
+
+ * priorities 0 to 3 - traffic class 0 (low priority)
+ * priorities 4 to 7 - traffic class 1 (medium-low priority)
+ * priorities 8 to 11 - traffic class 2 (medium-high priority)
+ * priorities 12 to 15 - traffic class 3 (high priority)
+
+tc qdisc add dev <int> root handle 1: \
+ mqprio num_tc 4 map 0 0 0 0 1 1 1 1 2 2 2 2 3 3 3 3 hw 1
+
+Debugging
+=========
+
+The following statistics are exported for each interface through ethtool:
+
+ - interrupt count per CPU
+ - Rx packets count per CPU
+ - Tx packets count per CPU
+ - Tx confirmed packets count per CPU
+ - Tx S/G frames count per CPU
+ - Tx error count per CPU
+ - Rx error count per CPU
+ - Rx error count per type
+ - congestion related statistics:
+ - congestion status
+ - time spent in congestion
+ - number of time the device entered congestion
+ - dropped packets count per cause
+
+The driver also exports the following information in sysfs:
+
+ - the FQ IDs for each FQ type
+ /sys/devices/platform/dpaa-ethernet.0/net/<int>/fqids
+
+ - the IDs of the buffer pools in use
+ /sys/devices/platform/dpaa-ethernet.0/net/<int>/bpids
or will be computed in the stack. Capable hardware can pass the hash in
the receive descriptor for the packet; this would usually be the same
hash used for RSS (e.g. computed Toeplitz hash). The hash is saved in
-skb->rx_hash and can be used elsewhere in the stack as a hash of the
+skb->hash and can be used elsewhere in the stack as a hash of the
packet’s flow.
Each receive hardware queue has an associated list of CPUs to which
TCP protocol
============
-Last updated: 9 February 2008
+Last updated: 3 June 2017
Contents
========
A congestion control mechanism can be registered through functions in
tcp_cong.c. The functions used by the congestion control mechanism are
registered via passing a tcp_congestion_ops struct to
-tcp_register_congestion_control. As a minimum name, ssthresh,
-cong_avoid must be valid.
+tcp_register_congestion_control. As a minimum, the congestion control
+mechanism must provide a valid name and must implement either ssthresh,
+cong_avoid and undo_cwnd hooks or the "omnipotent" cong_control hook.
Private data for a congestion control mechanism is stored in tp->ca_priv.
tcp_ca(tp) returns a pointer to this space. This is preallocated space - it
is important to check the size of your private data will fit this space, or
-alternatively space could be allocated elsewhere and a pointer to it could
+alternatively, space could be allocated elsewhere and a pointer to it could
be stored here.
There are three kinds of congestion control algorithms currently: The
simplest ones are derived from TCP reno (highspeed, scalable) and just
-provide an alternative the congestion window calculation. More complex
+provide an alternative congestion window calculation. More complex
ones like BIC try to look at other events to provide better
heuristics. There are also round trip time based algorithms like
Vegas and Westwood+.
needs to maintain fairness and performance. Please review current
research and RFC's before developing new modules.
-The method that is used to determine which congestion control mechanism is
-determined by the setting of the sysctl net.ipv4.tcp_congestion_control.
-The default congestion control will be the last one registered (LIFO);
-so if you built everything as modules, the default will be reno. If you
-build with the defaults from Kconfig, then CUBIC will be builtin (not a
-module) and it will end up the default.
+The default congestion control mechanism is chosen based on the
+DEFAULT_TCP_CONG Kconfig parameter. If you really want a particular default
+value then you can set it using sysctl net.ipv4.tcp_congestion_control. The
+module will be autoloaded if needed and you will get the expected protocol. If
+you ask for an unknown congestion method, then the sysctl attempt will fail.
-If you really want a particular default value then you will need
-to set it with the sysctl. If you use a sysctl, the module will be autoloaded
-if needed and you will get the expected protocol. If you ask for an
-unknown congestion method, then the sysctl attempt will fail.
-
-If you remove a tcp congestion control module, then you will get the next
+If you remove a TCP congestion control module, then you will get the next
available one. Since reno cannot be built as a module, and cannot be
-deleted, it will always be available.
+removed, it will always be available.
How the new TCP output machine [nyi] works.
===========================================
ARM/CIRRUS LOGIC EP93XX ARM ARCHITECTURE
M: Hartley Sweeten <hsweeten@visionengravers.com>
-M: Ryan Mallon <rmallon@gmail.com>
+M: Alexander Sverdlin <alexander.sverdlin@gmail.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-ep93xx/
M: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
-F: arch/arm/mach-mvebu/
-F: drivers/rtc/rtc-armada38x.c
F: arch/arm/boot/dts/armada*
F: arch/arm/boot/dts/kirkwood*
+F: arch/arm/configs/mvebu_*_defconfig
+F: arch/arm/mach-mvebu/
F: arch/arm64/boot/dts/marvell/armada*
F: drivers/cpufreq/mvebu-cpufreq.c
-F: arch/arm/configs/mvebu_*_defconfig
+F: drivers/irqchip/irq-armada-370-xp.c
+F: drivers/irqchip/irq-mvebu-*
+F: drivers/rtc/rtc-armada38x.c
ARM/Marvell Berlin SoC support
M: Jisheng Zhang <jszhang@marvell.com>
ARM/SAMSUNG EXYNOS ARM ARCHITECTURES
M: Kukjin Kim <kgene@kernel.org>
M: Krzysztof Kozlowski <krzk@kernel.org>
-R: Javier Martinez Canillas <javier@osg.samsung.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
Q: https://patchwork.kernel.org/project/linux-samsung-soc/list/
ARM/STI ARCHITECTURE
M: Patrice Chotard <patrice.chotard@st.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-L: kernel@stlinux.com
W: http://www.stlinux.com
S: Maintained
F: arch/arm/mach-sti/
GENWQE (IBM Generic Workqueue Card)
M: Frank Haverkamp <haver@linux.vnet.ibm.com>
-M: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
+M: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
S: Supported
F: drivers/misc/genwqe/
GPIO SUBSYSTEM
M: Linus Walleij <linus.walleij@linaro.org>
-M: Alexandre Courbot <gnurou@gmail.com>
L: linux-gpio@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio.git
S: Maintained
LIVE PATCHING
M: Josh Poimboeuf <jpoimboe@redhat.com>
-M: Jessica Yu <jeyu@redhat.com>
+M: Jessica Yu <jeyu@kernel.org>
M: Jiri Kosina <jikos@kernel.org>
M: Miroslav Benes <mbenes@suse.cz>
R: Petr Mladek <pmladek@suse.com>
F: drivers/media/radio/radio-miropcm20*
MELLANOX MLX4 core VPI driver
-M: Yishai Hadas <yishaih@mellanox.com>
+M: Tariq Toukan <tariqt@mellanox.com>
L: netdev@vger.kernel.org
L: linux-rdma@vger.kernel.org
W: http://www.mellanox.com
S: Supported
F: drivers/net/ethernet/mellanox/mlx4/
F: include/linux/mlx4/
-F: include/uapi/rdma/mlx4-abi.h
MELLANOX MLX4 IB driver
M: Yishai Hadas <yishaih@mellanox.com>
S: Supported
F: drivers/infiniband/hw/mlx4/
F: include/linux/mlx4/
+F: include/uapi/rdma/mlx4-abi.h
MELLANOX MLX5 core VPI driver
M: Saeed Mahameed <saeedm@mellanox.com>
S: Supported
F: drivers/net/ethernet/mellanox/mlx5/core/
F: include/linux/mlx5/
-F: include/uapi/rdma/mlx5-abi.h
MELLANOX MLX5 IB driver
M: Matan Barak <matanb@mellanox.com>
S: Supported
F: drivers/infiniband/hw/mlx5/
F: include/linux/mlx5/
+F: include/uapi/rdma/mlx5-abi.h
MELEXIS MLX90614 DRIVER
M: Crt Mori <cmo@melexis.com>
F: drivers/media/dvb-frontends/mn88473*
MODULE SUPPORT
-M: Jessica Yu <jeyu@redhat.com>
+M: Jessica Yu <jeyu@kernel.org>
M: Rusty Russell <rusty@rustcorp.com.au>
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux.git modules-next
S: Maintained
STI CEC DRIVER
M: Benjamin Gaignard <benjamin.gaignard@linaro.org>
-L: kernel@stlinux.com
S: Maintained
F: drivers/staging/media/st-cec/
F: Documentation/devicetree/bindings/media/stih-cec.txt
S: Supported
F: arch/arm/mach-davinci/
F: drivers/i2c/busses/i2c-davinci.c
+F: arch/arm/boot/dts/da850*
TI DAVINCI SERIES MEDIA DRIVER
M: "Lad, Prabhakar" <prabhakar.csengg@gmail.com>
F: drivers/net/wireless/wl3501*
WOLFSON MICROELECTRONICS DRIVERS
-L: patches@opensource.wolfsonmicro.com
+L: patches@opensource.cirrus.com
T: git https://github.com/CirrusLogic/linux-drivers.git
W: https://github.com/CirrusLogic/linux-drivers/wiki
S: Supported
VERSION = 4
PATCHLEVEL = 12
SUBLEVEL = 0
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc5
NAME = Fearless Coyote
# *DOCUMENTATION*
@ there.
.inst 'M' | ('Z' << 8) | (0x1310 << 16) @ tstne r0, #0x4d000
#else
- mov r0, r0
+ W(mov) r0, r0
#endif
.endm
.macro __EFI_HEADER
#ifdef CONFIG_EFI_STUB
- b __efi_start
-
.set start_offset, __efi_start - start
.org start + 0x3c
@
.rept 7
__nop
.endr
- ARM( mov r0, r0 )
- ARM( b 1f )
- THUMB( badr r12, 1f )
- THUMB( bx r12 )
+#ifndef CONFIG_THUMB2_KERNEL
+ mov r0, r0
+#else
+ AR_CLASS( sub pc, pc, #3 ) @ A/R: switch to Thumb2 mode
+ M_CLASS( nop.w ) @ M: already in Thumb2 mode
+ .thumb
+#endif
+ W(b) 1f
.word _magic_sig @ Magic numbers to help the loader
.word _magic_start @ absolute load/run zImage address
.word _magic_end @ zImage end address
.word 0x04030201 @ endianness flag
- THUMB( .thumb )
-1: __EFI_HEADER
-
+ __EFI_HEADER
+1:
ARM_BE8( setend be ) @ go BE8 if compiled for BE8
AR_CLASS( mrs r9, cpsr )
#ifdef CONFIG_ARM_VIRT_EXT
#include <dt-bindings/clock/bcm2835-aux.h>
#include <dt-bindings/gpio/gpio.h>
+/* firmware-provided startup stubs live here, where the secondary CPUs are
+ * spinning.
+ */
+/memreserve/ 0x00000000 0x00001000;
+
/* This include file covers the common peripherals and configuration between
* bcm2835 and bcm2836 implementations, leaving the CPU configuration to
* bcm2835.dtsi and bcm2836.dtsi.
ethphy0: ethernet-phy@2 {
reg = <2>;
+ micrel,led-mode = <1>;
+ clocks = <&clks IMX6UL_CLK_ENET_REF>;
+ clock-names = "rmii-ref";
};
ethphy1: ethernet-phy@1 {
reg = <1>;
+ micrel,led-mode = <1>;
+ clocks = <&clks IMX6UL_CLK_ENET2_REF>;
+ clock-names = "rmii-ref";
};
};
};
/* NetCP address range */
ranges = <0 0x26000000 0x1000000>;
- clocks = <&clkpa>, <&clkcpgmac>, <&chipclk12>, <&clkosr>;
- clock-names = "pa_clk", "ethss_clk", "cpts", "osr_clk";
+ clocks = <&clkpa>, <&clkcpgmac>, <&chipclk12>;
+ clock-names = "pa_clk", "ethss_clk", "cpts";
dma-coherent;
ti,navigator-dmas = <&dma_gbe 0>,
};
};
+ osr: sram@70000000 {
+ compatible = "mmio-sram";
+ reg = <0x70000000 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ clocks = <&clkosr>;
+ };
+
dspgpio0: keystone_dsp_gpio@02620240 {
compatible = "ti,keystone-dsp-gpio";
gpio-controller;
-#include <versatile-ab.dts>
+#include "versatile-ab.dts"
/ {
model = "ARM Versatile PB";
return ret;
}
-typedef void (*phys_reset_t)(unsigned long);
+typedef typeof(cpu_reset) phys_reset_t;
void mcpm_cpu_power_down(void)
{
* on the CPU.
*/
phys_reset = (phys_reset_t)(unsigned long)__pa_symbol(cpu_reset);
- phys_reset(__pa_symbol(mcpm_entry_point));
+ phys_reset(__pa_symbol(mcpm_entry_point), false);
/* should never get here */
BUG();
__mcpm_cpu_down(cpu, cluster);
phys_reset = (phys_reset_t)(unsigned long)__pa_symbol(cpu_reset);
- phys_reset(__pa_symbol(mcpm_entry_point));
+ phys_reset(__pa_symbol(mcpm_entry_point), false);
BUG();
}
#ifdef CONFIG_XEN
const struct dma_map_ops *dev_dma_ops;
#endif
- bool dma_coherent;
+ unsigned int dma_coherent:1;
+ unsigned int dma_ops_setup:1;
};
struct omap_device;
#define pgprot_noncached(prot) (prot)
#define pgprot_writecombine(prot) (prot)
#define pgprot_dmacoherent(prot) (prot)
+#define pgprot_device(prot) (prot)
/*
@ - Write permission implies XN: disabled
@ - Instruction cache: enabled
@ - Data/Unified cache: enabled
- @ - Memory alignment checks: enabled
@ - MMU: enabled (this code must be run from an identity mapping)
mrc p15, 4, r0, c1, c0, 0 @ HSCR
ldr r2, =HSCTLR_MASK
mrc p15, 0, r1, c1, c0, 0 @ SCTLR
ldr r2, =(HSCTLR_EE | HSCTLR_FI | HSCTLR_I | HSCTLR_C)
and r1, r1, r2
- ARM( ldr r2, =(HSCTLR_M | HSCTLR_A) )
- THUMB( ldr r2, =(HSCTLR_M | HSCTLR_A | HSCTLR_TE) )
+ ARM( ldr r2, =(HSCTLR_M) )
+ THUMB( ldr r2, =(HSCTLR_M | HSCTLR_TE) )
orr r1, r1, r2
orr r0, r0, r1
mcr p15, 4, r0, c1, c0, 0 @ HSCR
menuconfig ARCH_AT91
bool "Atmel SoCs"
depends on ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V7
+ select ARM_CPU_SUSPEND if PM
select COMMON_CLK_AT91
select GPIOLIB
select PINCTRL
davinci_sram_suspend = sram_alloc(davinci_cpu_suspend_sz, NULL);
if (!davinci_sram_suspend) {
pr_err("PM: cannot allocate SRAM memory\n");
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto no_sram_mem;
}
davinci_sram_push(davinci_sram_suspend, davinci_cpu_suspend,
suspend_set_ops(&davinci_pm_ops);
+ return 0;
+
+no_sram_mem:
+ iounmap(pm_config.ddrpsc_reg_base);
no_ddrpsc_mem:
iounmap(pm_config.ddrpll_reg_base);
no_ddrpll_mem:
}
EXPORT_SYMBOL_GPL(arm_iommu_attach_device);
-static void __arm_iommu_detach_device(struct device *dev)
+/**
+ * arm_iommu_detach_device
+ * @dev: valid struct device pointer
+ *
+ * Detaches the provided device from a previously attached map.
+ * This voids the dma operations (dma_map_ops pointer)
+ */
+void arm_iommu_detach_device(struct device *dev)
{
struct dma_iommu_mapping *mapping;
iommu_detach_device(mapping->domain, dev);
kref_put(&mapping->kref, release_iommu_mapping);
to_dma_iommu_mapping(dev) = NULL;
+ set_dma_ops(dev, NULL);
pr_debug("Detached IOMMU controller from %s device.\n", dev_name(dev));
}
-
-/**
- * arm_iommu_detach_device
- * @dev: valid struct device pointer
- *
- * Detaches the provided device from a previously attached map.
- * This voids the dma operations (dma_map_ops pointer)
- */
-void arm_iommu_detach_device(struct device *dev)
-{
- __arm_iommu_detach_device(dev);
- set_dma_ops(dev, NULL);
-}
EXPORT_SYMBOL_GPL(arm_iommu_detach_device);
static const struct dma_map_ops *arm_get_iommu_dma_map_ops(bool coherent)
if (!mapping)
return;
- __arm_iommu_detach_device(dev);
+ arm_iommu_detach_device(dev);
arm_iommu_release_mapping(mapping);
}
dev->dma_ops = xen_dma_ops;
}
#endif
+ dev->archdata.dma_ops_setup = true;
}
void arch_teardown_dma_ops(struct device *dev)
{
+ if (!dev->archdata.dma_ops_setup)
+ return;
+
arm_teardown_iommu_dma_ops(dev);
}
def_bool y
depends on COMPAT && SYSVIPC
-config KEYS_COMPAT
- def_bool y
- depends on COMPAT && KEYS
-
endmenu
menu "Power management options"
cpm_crypto: crypto@800000 {
compatible = "inside-secure,safexcel-eip197";
reg = <0x800000 0x200000>;
- interrupts = <GIC_SPI 34 (IRQ_TYPE_EDGE_RISING
- | IRQ_TYPE_LEVEL_HIGH)>,
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
cps_crypto: crypto@800000 {
compatible = "inside-secure,safexcel-eip197";
reg = <0x800000 0x200000>;
- interrupts = <GIC_SPI 34 (IRQ_TYPE_EDGE_RISING
- | IRQ_TYPE_LEVEL_HIGH)>,
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
CONFIG_PCIE_ARMADA_8K=y
CONFIG_PCI_AARDVARK=y
CONFIG_PCIE_RCAR=y
+CONFIG_PCIE_ROCKCHIP=m
CONFIG_PCI_HOST_GENERIC=y
CONFIG_PCI_XGENE=y
CONFIG_ARM64_VA_BITS_48=y
CONFIG_WL18XX=m
CONFIG_WLCORE_SDIO=m
CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_ADC=m
+CONFIG_KEYBOARD_CROS_EC=y
CONFIG_KEYBOARD_GPIO=y
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PM8941_PWRKEY=y
CONFIG_SPI_ORION=y
CONFIG_SPI_PL022=y
CONFIG_SPI_QUP=y
+CONFIG_SPI_ROCKCHIP=y
CONFIG_SPI_S3C64XX=y
CONFIG_SPI_SPIDEV=m
CONFIG_SPMI=y
CONFIG_CPU_THERMAL=y
CONFIG_THERMAL_EMULATION=y
CONFIG_EXYNOS_THERMAL=y
+CONFIG_ROCKCHIP_THERMAL=m
CONFIG_WATCHDOG=y
CONFIG_S3C2410_WATCHDOG=y
CONFIG_MESON_GXBB_WATCHDOG=m
CONFIG_BCM2835_WDT=y
CONFIG_MFD_CROS_EC=y
CONFIG_MFD_CROS_EC_I2C=y
+CONFIG_MFD_CROS_EC_SPI=y
CONFIG_MFD_EXYNOS_LPASS=m
CONFIG_MFD_HI655X_PMIC=y
CONFIG_MFD_MAX77620=y
CONFIG_MFD_SPMI_PMIC=y
CONFIG_MFD_RK808=y
CONFIG_MFD_SEC_CORE=y
+CONFIG_REGULATOR_FAN53555=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_GPIO=y
CONFIG_REGULATOR_HI655X=y
CONFIG_EXTCON_USB_GPIO=y
CONFIG_IIO=y
CONFIG_EXYNOS_ADC=y
+CONFIG_ROCKCHIP_SARADC=m
CONFIG_PWM=y
CONFIG_PWM_BCM2835=m
+CONFIG_PWM_CROS_EC=m
CONFIG_PWM_MESON=m
CONFIG_PWM_ROCKCHIP=y
CONFIG_PWM_SAMSUNG=y
CONFIG_PHY_SUN4I_USB=y
CONFIG_PHY_ROCKCHIP_INNO_USB2=y
CONFIG_PHY_ROCKCHIP_EMMC=y
+CONFIG_PHY_ROCKCHIP_PCIE=m
CONFIG_PHY_XGENE=y
CONFIG_PHY_TEGRA_XUSB=y
CONFIG_ARM_SCPI_PROTOCOL=y
#define SCTLR_ELx_A (1 << 1)
#define SCTLR_ELx_M 1
+#define SCTLR_EL2_RES1 ((1 << 4) | (1 << 5) | (1 << 11) | (1 << 16) | \
+ (1 << 16) | (1 << 18) | (1 << 22) | (1 << 23) | \
+ (1 << 28) | (1 << 29))
+
#define SCTLR_ELx_FLAGS (SCTLR_ELx_M | SCTLR_ELx_A | SCTLR_ELx_C | \
SCTLR_ELx_SA | SCTLR_ELx_I)
tlbi alle2
dsb sy
- mrs x4, sctlr_el2
- and x4, x4, #SCTLR_ELx_EE // preserve endianness of EL2
- ldr x5, =SCTLR_ELx_FLAGS
- orr x4, x4, x5
+ /*
+ * Preserve all the RES1 bits while setting the default flags,
+ * as well as the EE bit on BE. Drop the A flag since the compiler
+ * is allowed to generate unaligned accesses.
+ */
+ ldr x4, =(SCTLR_EL2_RES1 | (SCTLR_ELx_FLAGS & ~SCTLR_ELx_A))
+CPU_BE( orr x4, x4, #SCTLR_ELx_EE)
msr sctlr_el2, x4
isb
* Here set VMCR.CTLR in ICC_CTLR_EL1 layout.
* The vgic_set_vmcr() will convert to ICH_VMCR layout.
*/
- vmcr.ctlr = val & ICC_CTLR_EL1_CBPR_MASK;
- vmcr.ctlr |= val & ICC_CTLR_EL1_EOImode_MASK;
+ vmcr.cbpr = (val & ICC_CTLR_EL1_CBPR_MASK) >> ICC_CTLR_EL1_CBPR_SHIFT;
+ vmcr.eoim = (val & ICC_CTLR_EL1_EOImode_MASK) >> ICC_CTLR_EL1_EOImode_SHIFT;
vgic_set_vmcr(vcpu, &vmcr);
} else {
val = 0;
* The VMCR.CTLR value is in ICC_CTLR_EL1 layout.
* Extract it directly using ICC_CTLR_EL1 reg definitions.
*/
- val |= vmcr.ctlr & ICC_CTLR_EL1_CBPR_MASK;
- val |= vmcr.ctlr & ICC_CTLR_EL1_EOImode_MASK;
+ val |= (vmcr.cbpr << ICC_CTLR_EL1_CBPR_SHIFT) & ICC_CTLR_EL1_CBPR_MASK;
+ val |= (vmcr.eoim << ICC_CTLR_EL1_EOImode_SHIFT) & ICC_CTLR_EL1_EOImode_MASK;
p->regval = val;
}
p->regval = 0;
vgic_get_vmcr(vcpu, &vmcr);
- if (!((vmcr.ctlr & ICH_VMCR_CBPR_MASK) >> ICH_VMCR_CBPR_SHIFT)) {
+ if (!vmcr.cbpr) {
if (p->is_write) {
vmcr.abpr = (p->regval & ICC_BPR1_EL1_MASK) >>
ICC_BPR1_EL1_SHIFT;
#define TMP_REG_1 (MAX_BPF_JIT_REG + 0)
#define TMP_REG_2 (MAX_BPF_JIT_REG + 1)
#define TCALL_CNT (MAX_BPF_JIT_REG + 2)
+#define TMP_REG_3 (MAX_BPF_JIT_REG + 3)
/* Map BPF registers to A64 registers */
static const int bpf2a64[] = {
/* temporary registers for internal BPF JIT */
[TMP_REG_1] = A64_R(10),
[TMP_REG_2] = A64_R(11),
+ [TMP_REG_3] = A64_R(12),
/* tail_call_cnt */
[TCALL_CNT] = A64_R(26),
/* temporary register for blinding constants */
const u8 src = bpf2a64[insn->src_reg];
const u8 tmp = bpf2a64[TMP_REG_1];
const u8 tmp2 = bpf2a64[TMP_REG_2];
+ const u8 tmp3 = bpf2a64[TMP_REG_3];
const s16 off = insn->off;
const s32 imm = insn->imm;
const int i = insn - ctx->prog->insnsi;
emit(A64_PRFM(tmp, PST, L1, STRM), ctx);
emit(A64_LDXR(isdw, tmp2, tmp), ctx);
emit(A64_ADD(isdw, tmp2, tmp2, src), ctx);
- emit(A64_STXR(isdw, tmp2, tmp, tmp2), ctx);
+ emit(A64_STXR(isdw, tmp2, tmp, tmp3), ctx);
jmp_offset = -3;
check_imm19(jmp_offset);
- emit(A64_CBNZ(0, tmp2, jmp_offset), ctx);
+ emit(A64_CBNZ(0, tmp3, jmp_offset), ctx);
break;
/* R0 = ntohx(*(size *)(((struct sk_buff *)R6)->data + imm)) */
long uncleared;
while (count > PAGE_SIZE) {
- uncleared = __copy_to_user_hexagon(dest, &empty_zero_page,
- PAGE_SIZE);
+ uncleared = raw_copy_to_user(dest, &empty_zero_page, PAGE_SIZE);
if (uncleared)
return count - (PAGE_SIZE - uncleared);
count -= PAGE_SIZE;
dest += PAGE_SIZE;
}
if (count)
- count = __copy_to_user_hexagon(dest, &empty_zero_page, count);
+ count = raw_copy_to_user(dest, &empty_zero_page, count);
return count;
}
menu "Kernel options"
-config PPC_DT_CPU_FTRS
- bool "Device-tree based CPU feature discovery & setup"
- depends on PPC_BOOK3S_64
- default n
- help
- This enables code to use a new device tree binding for describing CPU
- compatibility and features. Saying Y here will attempt to use the new
- binding if the firmware provides it. Currently only the skiboot
- firmware provides this binding.
- If you're not sure say Y.
-
-config PPC_CPUFEATURES_ENABLE_UNKNOWN
- bool "cpufeatures pass through unknown features to guest/userspace"
- depends on PPC_DT_CPU_FTRS
- default y
-
config HIGHMEM
bool "High memory support"
depends on PPC32
source "security/Kconfig"
-config KEYS_COMPAT
- bool
- depends on COMPAT && KEYS
- default y
-
source "crypto/Kconfig"
config PPC_LIB_RHEAP
#define H_PTE_INDEX_SIZE 9
#define H_PMD_INDEX_SIZE 7
#define H_PUD_INDEX_SIZE 9
-#define H_PGD_INDEX_SIZE 12
+#define H_PGD_INDEX_SIZE 9
#ifndef __ASSEMBLY__
#define H_PTE_TABLE_SIZE (sizeof(pte_t) << H_PTE_INDEX_SIZE)
"1: "PPC_TLNEI" %4,0\n" \
_EMIT_BUG_ENTRY \
: : "i" (__FILE__), "i" (__LINE__), \
- "i" (BUGFLAG_TAINT(TAINT_WARN)), \
+ "i" (BUGFLAG_WARNING|BUGFLAG_TAINT(TAINT_WARN)),\
"i" (sizeof(struct bug_entry)), \
"r" (__ret_warn_on)); \
} \
#define CPU_FTR_DAWR LONG_ASM_CONST(0x0400000000000000)
#define CPU_FTR_DABRX LONG_ASM_CONST(0x0800000000000000)
#define CPU_FTR_PMAO_BUG LONG_ASM_CONST(0x1000000000000000)
-#define CPU_FTR_SUBCORE LONG_ASM_CONST(0x2000000000000000)
#define CPU_FTR_POWER9_DD1 LONG_ASM_CONST(0x4000000000000000)
#ifndef __ASSEMBLY__
CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \
CPU_FTR_ICSWX | CPU_FTR_CFAR | CPU_FTR_HVMODE | CPU_FTR_VMX_COPY | \
CPU_FTR_DBELL | CPU_FTR_HAS_PPR | CPU_FTR_DAWR | \
- CPU_FTR_ARCH_207S | CPU_FTR_TM_COMP | CPU_FTR_SUBCORE)
+ CPU_FTR_ARCH_207S | CPU_FTR_TM_COMP)
#define CPU_FTRS_POWER8E (CPU_FTRS_POWER8 | CPU_FTR_PMAO_BUG)
#define CPU_FTRS_POWER8_DD1 (CPU_FTRS_POWER8 & ~CPU_FTR_DBELL)
#define CPU_FTRS_POWER9 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
#define TASK_SIZE_128TB (0x0000800000000000UL)
#define TASK_SIZE_512TB (0x0002000000000000UL)
-#ifdef CONFIG_PPC_BOOK3S_64
+/*
+ * For now 512TB is only supported with book3s and 64K linux page size.
+ */
+#if defined(CONFIG_PPC_BOOK3S_64) && defined(CONFIG_PPC_64K_PAGES)
/*
* Max value currently used:
*/
-#define TASK_SIZE_USER64 TASK_SIZE_512TB
+#define TASK_SIZE_USER64 TASK_SIZE_512TB
+#define DEFAULT_MAP_WINDOW_USER64 TASK_SIZE_128TB
#else
-#define TASK_SIZE_USER64 TASK_SIZE_64TB
+#define TASK_SIZE_USER64 TASK_SIZE_64TB
+#define DEFAULT_MAP_WINDOW_USER64 TASK_SIZE_64TB
#endif
/*
* space during mmap's.
*/
#define TASK_UNMAPPED_BASE_USER32 (PAGE_ALIGN(TASK_SIZE_USER32 / 4))
-#define TASK_UNMAPPED_BASE_USER64 (PAGE_ALIGN(TASK_SIZE_128TB / 4))
+#define TASK_UNMAPPED_BASE_USER64 (PAGE_ALIGN(DEFAULT_MAP_WINDOW_USER64 / 4))
#define TASK_UNMAPPED_BASE ((is_32bit_task()) ? \
TASK_UNMAPPED_BASE_USER32 : TASK_UNMAPPED_BASE_USER64 )
* with 128TB and conditionally enable upto 512TB
*/
#ifdef CONFIG_PPC_BOOK3S_64
-#define DEFAULT_MAP_WINDOW ((is_32bit_task()) ? \
- TASK_SIZE_USER32 : TASK_SIZE_128TB)
+#define DEFAULT_MAP_WINDOW ((is_32bit_task()) ? \
+ TASK_SIZE_USER32 : DEFAULT_MAP_WINDOW_USER64)
#else
#define DEFAULT_MAP_WINDOW TASK_SIZE
#endif
#ifdef __powerpc64__
-#ifdef CONFIG_PPC_BOOK3S_64
-/* Limit stack to 128TB */
-#define STACK_TOP_USER64 TASK_SIZE_128TB
-#else
-#define STACK_TOP_USER64 TASK_SIZE_USER64
-#endif
-
+#define STACK_TOP_USER64 DEFAULT_MAP_WINDOW_USER64
#define STACK_TOP_USER32 TASK_SIZE_USER32
#define STACK_TOP (is_32bit_task() ? \
extern int sysfs_add_device_to_node(struct device *dev, int nid);
extern void sysfs_remove_device_from_node(struct device *dev, int nid);
+static inline int early_cpu_to_node(int cpu)
+{
+ int nid;
+
+ nid = numa_cpu_lookup_table[cpu];
+
+ /*
+ * Fall back to node 0 if nid is unset (it should be, except bugs).
+ * This allows callers to safely do NODE_DATA(early_cpu_to_node(cpu)).
+ */
+ return (nid < 0) ? 0 : nid;
+}
#else
+static inline int early_cpu_to_node(int cpu) { return 0; }
+
static inline void dump_numa_cpu_topology(void) {}
static inline int sysfs_add_device_to_node(struct device *dev, int nid)
* store at 0 and some ESBs support doing a trigger via a
* separate trigger page.
*/
-#define XIVE_ESB_GET 0x800
-#define XIVE_ESB_SET_PQ_00 0xc00
-#define XIVE_ESB_SET_PQ_01 0xd00
-#define XIVE_ESB_SET_PQ_10 0xe00
-#define XIVE_ESB_SET_PQ_11 0xf00
+#define XIVE_ESB_STORE_EOI 0x400 /* Store */
+#define XIVE_ESB_LOAD_EOI 0x000 /* Load */
+#define XIVE_ESB_GET 0x800 /* Load */
+#define XIVE_ESB_SET_PQ_00 0xc00 /* Load */
+#define XIVE_ESB_SET_PQ_01 0xd00 /* Load */
+#define XIVE_ESB_SET_PQ_10 0xe00 /* Load */
+#define XIVE_ESB_SET_PQ_11 0xf00 /* Load */
#define XIVE_ESB_VAL_P 0x2
#define XIVE_ESB_VAL_Q 0x1
#include <linux/export.h>
#include <linux/init.h>
#include <linux/jump_label.h>
+#include <linux/libfdt.h>
#include <linux/memblock.h>
#include <linux/printk.h>
#include <linux/sched.h>
{"processor-control-facility", feat_enable_dbell, CPU_FTR_DBELL},
{"processor-control-facility-v3", feat_enable_dbell, CPU_FTR_DBELL},
{"processor-utilization-of-resources-register", feat_enable_purr, 0},
- {"subcore", feat_enable, CPU_FTR_SUBCORE},
{"no-execute", feat_enable, 0},
{"strong-access-ordering", feat_enable, CPU_FTR_SAO},
{"cache-inhibited-large-page", feat_enable_large_ci, 0},
{"wait-v3", feat_enable, 0},
};
-/* XXX: how to configure this? Default + boot time? */
-#ifdef CONFIG_PPC_CPUFEATURES_ENABLE_UNKNOWN
-#define CPU_FEATURE_ENABLE_UNKNOWN 1
-#else
-#define CPU_FEATURE_ENABLE_UNKNOWN 0
-#endif
+static bool __initdata using_dt_cpu_ftrs;
+static bool __initdata enable_unknown = true;
+
+static int __init dt_cpu_ftrs_parse(char *str)
+{
+ if (!str)
+ return 0;
+
+ if (!strcmp(str, "off"))
+ using_dt_cpu_ftrs = false;
+ else if (!strcmp(str, "known"))
+ enable_unknown = false;
+ else
+ return 1;
+
+ return 0;
+}
+early_param("dt_cpu_ftrs", dt_cpu_ftrs_parse);
static void __init cpufeatures_setup_start(u32 isa)
{
}
}
- if (!known && CPU_FEATURE_ENABLE_UNKNOWN) {
+ if (!known && enable_unknown) {
if (!feat_try_enable_unknown(f)) {
pr_info("not enabling: %s (unknown and unsupported by kernel)\n",
f->name);
cur_cpu_spec->cpu_features, cur_cpu_spec->mmu_features);
}
+static int __init disabled_on_cmdline(void)
+{
+ unsigned long root, chosen;
+ const char *p;
+
+ root = of_get_flat_dt_root();
+ chosen = of_get_flat_dt_subnode_by_name(root, "chosen");
+ if (chosen == -FDT_ERR_NOTFOUND)
+ return false;
+
+ p = of_get_flat_dt_prop(chosen, "bootargs", NULL);
+ if (!p)
+ return false;
+
+ if (strstr(p, "dt_cpu_ftrs=off"))
+ return true;
+
+ return false;
+}
+
static int __init fdt_find_cpu_features(unsigned long node, const char *uname,
int depth, void *data)
{
return 0;
}
-static bool __initdata using_dt_cpu_ftrs = false;
-
bool __init dt_cpu_ftrs_in_use(void)
{
return using_dt_cpu_ftrs;
bool __init dt_cpu_ftrs_init(void *fdt)
{
+ using_dt_cpu_ftrs = false;
+
/* Setup and verify the FDT, if it fails we just bail */
if (!early_init_dt_verify(fdt))
return false;
if (!of_scan_flat_dt(fdt_find_cpu_features, NULL))
return false;
+ if (disabled_on_cmdline())
+ return false;
+
cpufeatures_setup_cpu();
using_dt_cpu_ftrs = true;
void __init dt_cpu_ftrs_scan(void)
{
+ if (!using_dt_cpu_ftrs)
+ return;
+
of_scan_flat_dt(dt_cpu_ftrs_scan_callback, NULL);
}
#ifdef CONFIG_VSX
current->thread.used_vsr = 0;
#endif
+ current->thread.load_fp = 0;
memset(¤t->thread.fp_state, 0, sizeof(current->thread.fp_state));
current->thread.fp_save_area = NULL;
#ifdef CONFIG_ALTIVEC
current->thread.vr_save_area = NULL;
current->thread.vrsave = 0;
current->thread.used_vr = 0;
+ current->thread.load_vec = 0;
#endif /* CONFIG_ALTIVEC */
#ifdef CONFIG_SPE
memset(current->thread.evr, 0, sizeof(current->thread.evr));
current->thread.tm_tfhar = 0;
current->thread.tm_texasr = 0;
current->thread.tm_tfiar = 0;
+ current->thread.load_tm = 0;
#endif /* CONFIG_PPC_TRANSACTIONAL_MEM */
}
EXPORT_SYMBOL(start_thread);
#ifdef CONFIG_PPC_MM_SLICES
#ifdef CONFIG_PPC64
- init_mm.context.addr_limit = TASK_SIZE_128TB;
+ init_mm.context.addr_limit = DEFAULT_MAP_WINDOW_USER64;
#else
#error "context.addr_limit not initialized."
#endif
static void * __init pcpu_fc_alloc(unsigned int cpu, size_t size, size_t align)
{
- return __alloc_bootmem_node(NODE_DATA(cpu_to_node(cpu)), size, align,
+ return __alloc_bootmem_node(NODE_DATA(early_cpu_to_node(cpu)), size, align,
__pa(MAX_DMA_ADDRESS));
}
static int pcpu_cpu_distance(unsigned int from, unsigned int to)
{
- if (cpu_to_node(from) == cpu_to_node(to))
+ if (early_cpu_to_node(from) == early_cpu_to_node(to))
return LOCAL_DISTANCE;
else
return REMOTE_DISTANCE;
{
/* If the XIVE supports the new "store EOI facility, use it */
if (xd->flags & XIVE_IRQ_FLAG_STORE_EOI)
- __x_writeq(0, __x_eoi_page(xd));
+ __x_writeq(0, __x_eoi_page(xd) + XIVE_ESB_STORE_EOI);
else if (hw_irq && xd->flags & XIVE_IRQ_FLAG_EOI_FW) {
opal_int_eoi(hw_irq);
} else {
* properly.
*/
if (xd->flags & XIVE_IRQ_FLAG_LSI)
- __x_readq(__x_eoi_page(xd));
+ __x_readq(__x_eoi_page(xd) + XIVE_ESB_LOAD_EOI);
else {
eoi_val = GLUE(X_PFX,esb_load)(xd, XIVE_ESB_SET_PQ_00);
* mm->context.addr_limit. Default to max task size so that we copy the
* default values to paca which will help us to handle slb miss early.
*/
- mm->context.addr_limit = TASK_SIZE_128TB;
+ mm->context.addr_limit = DEFAULT_MAP_WINDOW_USER64;
/*
* The old code would re-promote on fork, we don't do that when using
.name = "POWER9",
.n_counter = MAX_PMU_COUNTERS,
.add_fields = ISA207_ADD_FIELDS,
- .test_adder = ISA207_TEST_ADDER,
+ .test_adder = P9_DD1_TEST_ADDER,
.compute_mmcr = isa207_compute_mmcr,
.config_bhrb = power9_config_bhrb,
.bhrb_filter_map = power9_bhrb_filter_map,
.name = "POWER9",
.n_counter = MAX_PMU_COUNTERS,
.add_fields = ISA207_ADD_FIELDS,
- .test_adder = P9_DD1_TEST_ADDER,
+ .test_adder = ISA207_TEST_ADDER,
.compute_mmcr = isa207_compute_mmcr,
.config_bhrb = power9_config_bhrb,
.bhrb_filter_map = power9_bhrb_filter_map,
In case of doubt, say Y
+config PPC_DT_CPU_FTRS
+ bool "Device-tree based CPU feature discovery & setup"
+ depends on PPC_BOOK3S_64
+ default y
+ help
+ This enables code to use a new device tree binding for describing CPU
+ compatibility and features. Saying Y here will attempt to use the new
+ binding if the firmware provides it. Currently only the skiboot
+ firmware provides this binding.
+ If you're not sure say Y.
+
config UDBG_RTAS_CONSOLE
bool "RTAS based debug console"
depends on PPC_RTAS
skip = roundup(cprm->pos - total + sz, 4) - cprm->pos;
if (!dump_skip(cprm, skip))
goto Eio;
+
+ rc = 0;
out:
free_page((unsigned long)buf);
return rc;
if (WARN_ON(!gpdev))
return NULL;
- if (WARN_ON(!gpdev->dev.of_node))
+ /* Not all PCI devices have device-tree nodes */
+ if (!gpdev->dev.of_node)
return NULL;
/* Get assoicated PCI device */
static int subcore_init(void)
{
- if (!cpu_has_feature(CPU_FTR_SUBCORE))
+ unsigned pvr_ver;
+
+ pvr_ver = PVR_VER(mfspr(SPRN_PVR));
+
+ if (pvr_ver != PVR_POWER8 &&
+ pvr_ver != PVR_POWER8E &&
+ pvr_ver != PVR_POWER8NVL)
return 0;
/*
for (i = 0; i < num_lmbs; i++) {
lmbs[i].base_addr = be64_to_cpu(lmbs[i].base_addr);
lmbs[i].drc_index = be32_to_cpu(lmbs[i].drc_index);
+ lmbs[i].aa_index = be32_to_cpu(lmbs[i].aa_index);
lmbs[i].flags = be32_to_cpu(lmbs[i].flags);
}
for (i = 0; i < num_lmbs; i++) {
lmbs[i].base_addr = cpu_to_be64(lmbs[i].base_addr);
lmbs[i].drc_index = cpu_to_be32(lmbs[i].drc_index);
+ lmbs[i].aa_index = cpu_to_be32(lmbs[i].aa_index);
lmbs[i].flags = cpu_to_be32(lmbs[i].flags);
}
static void u8_gpio_save_regs(struct of_mm_gpio_chip *mm_gc)
{
- struct u8_gpio_chip *u8_gc = gpiochip_get_data(&mm_gc->gc);
+ struct u8_gpio_chip *u8_gc =
+ container_of(mm_gc, struct u8_gpio_chip, mm_gc);
u8_gc->data = in_8(mm_gc->regs);
}
{
/* If the XIVE supports the new "store EOI facility, use it */
if (xd->flags & XIVE_IRQ_FLAG_STORE_EOI)
- out_be64(xd->eoi_mmio, 0);
+ out_be64(xd->eoi_mmio + XIVE_ESB_STORE_EOI, 0);
else if (hw_irq && xd->flags & XIVE_IRQ_FLAG_EOI_FW) {
/*
* The FW told us to call it. This happens for some
config SYSVIPC_COMPAT
def_bool y if COMPAT && SYSVIPC
-config KEYS_COMPAT
- def_bool y if COMPAT && KEYS
-
config SMP
def_bool y
prompt "Symmetric multi-processing support"
CONFIG_SCHED_AUTOGROUP=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_EXPERT=y
+# CONFIG_SYSFS_SYSCALL is not set
CONFIG_BPF_SYSCALL=y
CONFIG_USERFAULTFD=y
# CONFIG_COMPAT_BRK is not set
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_THROTTLING=y
+CONFIG_BLK_WBT=y
+CONFIG_BLK_WBT_SQ=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_IBM_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_UNIX_DIAG=m
CONFIG_XFRM_USER=m
CONFIG_NET_KEY=m
+CONFIG_SMC=m
+CONFIG_SMC_DIAG=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_ACT_CSUM=m
CONFIG_DNS_RESOLVER=y
+CONFIG_NETLINK_DIAG=m
CONFIG_CGROUP_NET_PRIO=y
CONFIG_BPF_JIT=y
CONFIG_NET_PKTGEN=m
CONFIG_DMA_CMA=y
CONFIG_CMA_SIZE_MBYTES=0
CONFIG_CONNECTOR=y
+CONFIG_ZRAM=m
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_DRBD=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_OSD=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_ATA_OVER_ETH=m
+CONFIG_BLK_DEV_RAM_DAX=y
CONFIG_VIRTIO_BLK=y
+CONFIG_BLK_DEV_RBD=m
CONFIG_ENCLOSURE_SERVICES=m
+CONFIG_GENWQE=m
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
CONFIG_MLX4_EN=m
+CONFIG_MLX5_CORE=m
+CONFIG_MLX5_CORE_EN=y
# CONFIG_NET_VENDOR_NATSEMI is not set
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPPOL2TP=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_MLX4_INFINIBAND=m
+CONFIG_MLX5_INFINIBAND=m
CONFIG_VIRTIO_BALLOON=m
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_XFS_DEBUG=y
CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_DLM=y
CONFIG_OCFS2_FS=m
CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
+CONFIG_BTRFS_DEBUG=y
CONFIG_NILFS2_FS=m
+CONFIG_FS_DAX=y
+CONFIG_EXPORTFS_BLOCK_OPS=y
CONFIG_FANOTIFY=y
+CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
+CONFIG_QUOTA_DEBUG=y
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_AUTOFS4_FS=m
CONFIG_DEBUG_SECTION_MISMATCH=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_PAGEALLOC=y
+CONFIG_DEBUG_RODATA_TEST=y
CONFIG_DEBUG_OBJECTS=y
CONFIG_DEBUG_OBJECTS_SELFTEST=y
CONFIG_DEBUG_OBJECTS_FREE=y
CONFIG_WQ_WATCHDOG=y
CONFIG_PANIC_ON_OOPS=y
CONFIG_DEBUG_TIMEKEEPING=y
-CONFIG_TIMER_STATS=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
CONFIG_PROVE_LOCKING=y
CONFIG_RCU_CPU_STALL_TIMEOUT=300
CONFIG_NOTIFIER_ERROR_INJECTION=m
CONFIG_PM_NOTIFIER_ERROR_INJECT=m
+CONFIG_NETDEV_NOTIFIER_ERROR_INJECT=m
CONFIG_FAULT_INJECTION=y
CONFIG_FAILSLAB=y
CONFIG_FAIL_PAGE_ALLOC=y
CONFIG_TRACE_ENUM_MAP_FILE=y
CONFIG_LKDTM=m
CONFIG_TEST_LIST_SORT=y
+CONFIG_TEST_SORT=y
CONFIG_KPROBES_SANITY_TEST=y
CONFIG_RBTREE_TEST=y
CONFIG_INTERVAL_TREE_TEST=m
CONFIG_PERCPU_TEST=m
CONFIG_ATOMIC64_SELFTEST=y
-CONFIG_TEST_STRING_HELPERS=y
-CONFIG_TEST_KSTRTOX=y
CONFIG_DMA_API_DEBUG=y
CONFIG_TEST_BPF=m
CONFIG_BUG_ON_DATA_CORRUPTION=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
+CONFIG_HARDENED_USERCOPY=y
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
CONFIG_CRYPTO_DH=m
CONFIG_CRYPTO_ECDH=m
CONFIG_CRYPTO_USER=m
+CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_MCRYPTD=m
CONFIG_CRYPTO_TEST=m
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m
CONFIG_CRYPTO_CRC32=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_SHA3=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_AES_TI=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_842=m
CONFIG_CRYPTO_LZ4=m
CONFIG_CRYPTO_LZ4HC=m
+CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_USER_API_HASH=m
CONFIG_CRYPTO_USER_API_SKCIPHER=m
CONFIG_CRYPTO_USER_API_RNG=m
CONFIG_CRYPTO_SHA512_S390=m
CONFIG_CRYPTO_DES_S390=m
CONFIG_CRYPTO_AES_S390=m
+CONFIG_CRYPTO_PAES_S390=m
CONFIG_CRYPTO_GHASH_S390=m
CONFIG_CRYPTO_CRC32_S390=y
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_X509_CERTIFICATE_PARSER=m
CONFIG_CRC7=m
CONFIG_CRC8=m
+CONFIG_RANDOM32_SELFTEST=y
CONFIG_CORDIC=m
CONFIG_CMM=m
CONFIG_APPLDATA_BASE=y
CONFIG_SCHED_AUTOGROUP=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_EXPERT=y
+# CONFIG_SYSFS_SYSCALL is not set
CONFIG_BPF_SYSCALL=y
CONFIG_USERFAULTFD=y
# CONFIG_COMPAT_BRK is not set
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_THROTTLING=y
+CONFIG_BLK_WBT=y
+CONFIG_BLK_WBT_SQ=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_IBM_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_UNIX_DIAG=m
CONFIG_XFRM_USER=m
CONFIG_NET_KEY=m
+CONFIG_SMC=m
+CONFIG_SMC_DIAG=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_ACT_CSUM=m
CONFIG_DNS_RESOLVER=y
+CONFIG_NETLINK_DIAG=m
CONFIG_CGROUP_NET_PRIO=y
CONFIG_BPF_JIT=y
CONFIG_NET_PKTGEN=m
CONFIG_DMA_CMA=y
CONFIG_CMA_SIZE_MBYTES=0
CONFIG_CONNECTOR=y
+CONFIG_ZRAM=m
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_DRBD=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_OSD=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_ATA_OVER_ETH=m
+CONFIG_BLK_DEV_RAM_DAX=y
CONFIG_VIRTIO_BLK=y
CONFIG_ENCLOSURE_SERVICES=m
+CONFIG_GENWQE=m
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
CONFIG_MLX4_EN=m
+CONFIG_MLX5_CORE=m
+CONFIG_MLX5_CORE_EN=y
# CONFIG_NET_VENDOR_NATSEMI is not set
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPPOL2TP=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_MLX4_INFINIBAND=m
+CONFIG_MLX5_INFINIBAND=m
CONFIG_VIRTIO_BALLOON=m
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_DLM=y
CONFIG_OCFS2_FS=m
CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
CONFIG_NILFS2_FS=m
+CONFIG_FS_DAX=y
+CONFIG_EXPORTFS_BLOCK_OPS=y
CONFIG_FANOTIFY=y
+CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_PANIC_ON_OOPS=y
-CONFIG_TIMER_STATS=y
CONFIG_RCU_TORTURE_TEST=m
CONFIG_RCU_CPU_STALL_TIMEOUT=60
CONFIG_LATENCYTOP=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
+CONFIG_HARDENED_USERCOPY=y
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m
CONFIG_CRYPTO_CRC32=m
CONFIG_CRYPTO_SHA3=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_AES_TI=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_842=m
CONFIG_CRYPTO_LZ4=m
CONFIG_CRYPTO_LZ4HC=m
+CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_USER_API_HASH=m
CONFIG_CRYPTO_USER_API_SKCIPHER=m
CONFIG_CRYPTO_USER_API_RNG=m
CONFIG_CRYPTO_USER_API_AEAD=m
CONFIG_ZCRYPT=m
+CONFIG_PKEY=m
CONFIG_CRYPTO_SHA1_S390=m
CONFIG_CRYPTO_SHA256_S390=m
CONFIG_CRYPTO_SHA512_S390=m
CONFIG_CRYPTO_DES_S390=m
CONFIG_CRYPTO_AES_S390=m
+CONFIG_CRYPTO_PAES_S390=m
CONFIG_CRYPTO_GHASH_S390=m
CONFIG_CRYPTO_CRC32_S390=y
CONFIG_CRC7=m
CONFIG_SCHED_AUTOGROUP=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_EXPERT=y
+# CONFIG_SYSFS_SYSCALL is not set
CONFIG_BPF_SYSCALL=y
CONFIG_USERFAULTFD=y
# CONFIG_COMPAT_BRK is not set
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_THROTTLING=y
+CONFIG_BLK_WBT=y
+CONFIG_BLK_WBT_SQ=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_IBM_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_UNIX_DIAG=m
CONFIG_XFRM_USER=m
CONFIG_NET_KEY=m
+CONFIG_SMC=m
+CONFIG_SMC_DIAG=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_NET_ACT_SKBEDIT=m
CONFIG_NET_ACT_CSUM=m
CONFIG_DNS_RESOLVER=y
+CONFIG_NETLINK_DIAG=m
CONFIG_CGROUP_NET_PRIO=y
CONFIG_BPF_JIT=y
CONFIG_NET_PKTGEN=m
CONFIG_DMA_CMA=y
CONFIG_CMA_SIZE_MBYTES=0
CONFIG_CONNECTOR=y
+CONFIG_ZRAM=m
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_DRBD=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_OSD=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=32768
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_ATA_OVER_ETH=m
+CONFIG_BLK_DEV_RAM_DAX=y
CONFIG_VIRTIO_BLK=y
CONFIG_ENCLOSURE_SERVICES=m
+CONFIG_GENWQE=m
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
CONFIG_MLX4_EN=m
+CONFIG_MLX5_CORE=m
+CONFIG_MLX5_CORE_EN=y
# CONFIG_NET_VENDOR_NATSEMI is not set
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPPOL2TP=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_ACCESS=m
CONFIG_MLX4_INFINIBAND=m
+CONFIG_MLX5_INFINIBAND=m
CONFIG_VIRTIO_BALLOON=m
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_GFS2_FS=m
+CONFIG_GFS2_FS_LOCKING_DLM=y
CONFIG_OCFS2_FS=m
CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
CONFIG_NILFS2_FS=m
+CONFIG_FS_DAX=y
+CONFIG_EXPORTFS_BLOCK_OPS=y
CONFIG_FANOTIFY=y
+CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_PANIC_ON_OOPS=y
-CONFIG_TIMER_STATS=y
CONFIG_RCU_TORTURE_TEST=m
CONFIG_RCU_CPU_STALL_TIMEOUT=60
CONFIG_LATENCYTOP=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
+CONFIG_HARDENED_USERCOPY=y
CONFIG_SECURITY_SELINUX=y
CONFIG_SECURITY_SELINUX_BOOTPARAM=y
CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_KEYWRAP=m
+CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m
CONFIG_CRYPTO_CRC32=m
CONFIG_CRYPTO_SHA3=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_AES_TI=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_842=m
CONFIG_CRYPTO_LZ4=m
CONFIG_CRYPTO_LZ4HC=m
+CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_USER_API_HASH=m
CONFIG_CRYPTO_USER_API_SKCIPHER=m
CONFIG_CRYPTO_USER_API_RNG=m
CONFIG_CRYPTO_SHA512_S390=m
CONFIG_CRYPTO_DES_S390=m
CONFIG_CRYPTO_AES_S390=m
+CONFIG_CRYPTO_PAES_S390=m
CONFIG_CRYPTO_GHASH_S390=m
CONFIG_CRYPTO_CRC32_S390=y
CONFIG_CRC7=m
CONFIG_NR_CPUS=2
# CONFIG_HOTPLUG_CPU is not set
CONFIG_HZ_100=y
+# CONFIG_ARCH_RANDOM is not set
# CONFIG_COMPACTION is not set
# CONFIG_MIGRATION is not set
+# CONFIG_BOUNCE is not set
# CONFIG_CHECK_STACK is not set
# CONFIG_CHSC_SCH is not set
# CONFIG_SCM_BUS is not set
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_ZFCP=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
# CONFIG_HVC_IUCV is not set
+# CONFIG_HW_RANDOM_S390 is not set
CONFIG_RAW_DRIVER=y
# CONFIG_SCLP_ASYNC is not set
# CONFIG_HMC_DRV is not set
# CONFIG_INOTIFY_USER is not set
CONFIG_CONFIGFS_FS=y
# CONFIG_MISC_FILESYSTEMS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
CONFIG_PANIC_ON_OOPS=y
# CONFIG_SCHED_DEBUG is not set
CONFIG_USER_NS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_EXPERT=y
+# CONFIG_SYSFS_SYSCALL is not set
CONFIG_BPF_SYSCALL=y
CONFIG_USERFAULTFD=y
# CONFIG_COMPAT_BRK is not set
CONFIG_SCSI_VIRTIO=y
CONFIG_MD=y
CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
CONFIG_MD_MULTIPATH=m
CONFIG_BLK_DEV_DM=y
CONFIG_DM_CRYPT=m
CONFIG_VIRTIO_NET=y
# CONFIG_NET_VENDOR_ALACRITECH is not set
# CONFIG_NET_VENDOR_SOLARFLARE is not set
+# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_INPUT is not set
# CONFIG_SERIO is not set
CONFIG_DEVKMEM=y
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_PANIC_ON_OOPS=y
-CONFIG_TIMER_STATS=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCK_STAT=y
CONFIG_DEBUG_SG=y
CONFIG_DEBUG_NOTIFIERS=y
CONFIG_RCU_CPU_STALL_TIMEOUT=60
-CONFIG_RCU_TRACE=y
CONFIG_LATENCYTOP=y
CONFIG_SCHED_TRACER=y
CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP=y
CONFIG_STACK_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
-CONFIG_UPROBE_EVENTS=y
CONFIG_FUNCTION_PROFILER=y
CONFIG_TRACE_ENUM_MAP_FILE=y
CONFIG_KPROBES_SANITY_TEST=y
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTS=m
-CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_USER_API_RNG=m
CONFIG_ZCRYPT=m
CONFIG_PKEY=m
+CONFIG_CRYPTO_PAES_S390=m
CONFIG_CRYPTO_SHA1_S390=m
CONFIG_CRYPTO_SHA256_S390=m
CONFIG_CRYPTO_SHA512_S390=m
struct mutex ais_lock;
u8 simm;
u8 nimm;
- int ais_enabled;
};
struct kvm_hw_wp_info_arch {
lctlg %c1,%c1,__LC_USER_ASCE # load primary asce
.Lsie_done:
# some program checks are suppressing. C code (e.g. do_protection_exception)
-# will rewind the PSW by the ILC, which is 4 bytes in case of SIE. Other
-# instructions between sie64a and .Lsie_done should not cause program
-# interrupts. So lets use a nop (47 00 00 00) as a landing pad.
+# will rewind the PSW by the ILC, which is often 4 bytes in case of SIE. There
+# are some corner cases (e.g. runtime instrumentation) where ILC is unpredictable.
+# Other instructions between sie64a and .Lsie_done should not cause program
+# interrupts. So lets use 3 nops as a landing pad for all possible rewinds.
# See also .Lcleanup_sie
-.Lrewind_pad:
- nop 0
+.Lrewind_pad6:
+ nopr 7
+.Lrewind_pad4:
+ nopr 7
+.Lrewind_pad2:
+ nopr 7
.globl sie_exit
sie_exit:
lg %r14,__SF_EMPTY+8(%r15) # load guest register save area
stg %r14,__SF_EMPTY+16(%r15) # set exit reason code
j sie_exit
- EX_TABLE(.Lrewind_pad,.Lsie_fault)
+ EX_TABLE(.Lrewind_pad6,.Lsie_fault)
+ EX_TABLE(.Lrewind_pad4,.Lsie_fault)
+ EX_TABLE(.Lrewind_pad2,.Lsie_fault)
EX_TABLE(sie_exit,.Lsie_fault)
EXPORT_SYMBOL(sie64a)
EXPORT_SYMBOL(sie_exit)
struct kvm_s390_ais_req req;
int ret = 0;
- if (!fi->ais_enabled)
+ if (!test_kvm_facility(kvm, 72))
return -ENOTSUPP;
if (copy_from_user(&req, (void __user *)attr->addr, sizeof(req)))
};
int ret = 0;
- if (!fi->ais_enabled || !adapter->suppressible)
+ if (!test_kvm_facility(kvm, 72) || !adapter->suppressible)
return kvm_s390_inject_vm(kvm, &s390int);
mutex_lock(&fi->ais_lock);
} else {
set_kvm_facility(kvm->arch.model.fac_mask, 72);
set_kvm_facility(kvm->arch.model.fac_list, 72);
- kvm->arch.float_int.ais_enabled = 1;
r = 0;
}
mutex_unlock(&kvm->lock);
mutex_init(&kvm->arch.float_int.ais_lock);
kvm->arch.float_int.simm = 0;
kvm->arch.float_int.nimm = 0;
- kvm->arch.float_int.ais_enabled = 0;
spin_lock_init(&kvm->arch.float_int.lock);
for (i = 0; i < FIRQ_LIST_COUNT; i++)
INIT_LIST_HEAD(&kvm->arch.float_int.lists[i]);
int "Maximum number of CPUs"
depends on SMP
range 2 32 if SPARC32
- range 2 1024 if SPARC64
+ range 2 4096 if SPARC64
default 32 if SPARC32
- default 64 if SPARC64
+ default 4096 if SPARC64
source kernel/Kconfig.hz
depends on SPARC64 && SMP
config NODES_SHIFT
- int
- default "4"
+ int "Maximum NUMA Nodes (as a power of 2)"
+ range 4 5 if SPARC64
+ default "5"
depends on NEED_MULTIPLE_NODES
+ help
+ Specify the maximum number of NUMA Nodes available on the target
+ system. Increases memory reserved to accommodate various tables.
# Some NUMA nodes have memory ranges that span
# other nodes. Even though a pfn is valid and
depends on COMPAT && SYSVIPC
default y
-config KEYS_COMPAT
- def_bool y if COMPAT && KEYS
-
endmenu
source "net/Kconfig"
#define CTX_NR_MASK TAG_CONTEXT_BITS
#define CTX_HW_MASK (CTX_NR_MASK | CTX_PGSZ_MASK)
-#define CTX_FIRST_VERSION ((_AC(1,UL) << CTX_VERSION_SHIFT) + _AC(1,UL))
+#define CTX_FIRST_VERSION BIT(CTX_VERSION_SHIFT)
#define CTX_VALID(__ctx) \
(!(((__ctx.sparc64_ctx_val) ^ tlb_context_cache) & CTX_VERSION_MASK))
#define CTX_HWBITS(__ctx) ((__ctx.sparc64_ctx_val) & CTX_HW_MASK)
extern unsigned long tlb_context_cache;
extern unsigned long mmu_context_bmap[];
+DECLARE_PER_CPU(struct mm_struct *, per_cpu_secondary_mm);
void get_new_mmu_context(struct mm_struct *mm);
-#ifdef CONFIG_SMP
-void smp_new_mmu_context_version(void);
-#else
-#define smp_new_mmu_context_version() do { } while (0)
-#endif
-
int init_new_context(struct task_struct *tsk, struct mm_struct *mm);
void destroy_context(struct mm_struct *mm);
static inline void switch_mm(struct mm_struct *old_mm, struct mm_struct *mm, struct task_struct *tsk)
{
unsigned long ctx_valid, flags;
- int cpu;
+ int cpu = smp_processor_id();
+ per_cpu(per_cpu_secondary_mm, cpu) = mm;
if (unlikely(mm == &init_mm))
return;
* for the first time, we must flush that context out of the
* local TLB.
*/
- cpu = smp_processor_id();
if (!ctx_valid || !cpumask_test_cpu(cpu, mm_cpumask(mm))) {
cpumask_set_cpu(cpu, mm_cpumask(mm));
__flush_tlb_mm(CTX_HWBITS(mm->context),
}
#define deactivate_mm(tsk,mm) do { } while (0)
-
-/* Activate a new MM instance for the current task. */
-static inline void activate_mm(struct mm_struct *active_mm, struct mm_struct *mm)
-{
- unsigned long flags;
- int cpu;
-
- spin_lock_irqsave(&mm->context.lock, flags);
- if (!CTX_VALID(mm->context))
- get_new_mmu_context(mm);
- cpu = smp_processor_id();
- if (!cpumask_test_cpu(cpu, mm_cpumask(mm)))
- cpumask_set_cpu(cpu, mm_cpumask(mm));
-
- load_secondary_context(mm);
- __flush_tlb_mm(CTX_HWBITS(mm->context), SECONDARY_CONTEXT);
- tsb_context_switch(mm);
- spin_unlock_irqrestore(&mm->context.lock, flags);
-}
-
+#define activate_mm(active_mm, mm) switch_mm(active_mm, mm, NULL)
#endif /* !(__ASSEMBLY__) */
#endif /* !(__SPARC64_MMU_CONTEXT_H) */
#define PIL_SMP_CALL_FUNC 1
#define PIL_SMP_RECEIVE_SIGNAL 2
#define PIL_SMP_CAPTURE 3
-#define PIL_SMP_CTX_NEW_VERSION 4
#define PIL_DEVICE_IRQ 5
#define PIL_SMP_CALL_FUNC_SNGL 6
#define PIL_DEFERRED_PCR_WORK 7
int compat_len;
u64 dev_no;
+ u64 id;
unsigned long channel_id;
pbuf.req.handle = cp->handle;
pbuf.req.major = 1;
pbuf.req.minor = 0;
- strcpy(pbuf.req.svc_id, cp->service_id);
+ strcpy(pbuf.id_buf, cp->service_id);
err = __ds_send(lp, &pbuf, msg_len);
if (err > 0)
{
#ifdef CONFIG_SMP
unsigned long page;
+ void *mondo, *p;
- BUILD_BUG_ON((NR_CPUS * sizeof(u16)) > (PAGE_SIZE - 64));
+ BUILD_BUG_ON((NR_CPUS * sizeof(u16)) > PAGE_SIZE);
+
+ /* Make sure mondo block is 64byte aligned */
+ p = kzalloc(127, GFP_KERNEL);
+ if (!p) {
+ prom_printf("SUN4V: Error, cannot allocate mondo block.\n");
+ prom_halt();
+ }
+ mondo = (void *)(((unsigned long)p + 63) & ~0x3f);
+ tb->cpu_mondo_block_pa = __pa(mondo);
page = get_zeroed_page(GFP_KERNEL);
if (!page) {
- prom_printf("SUN4V: Error, cannot allocate cpu mondo page.\n");
+ prom_printf("SUN4V: Error, cannot allocate cpu list page.\n");
prom_halt();
}
- tb->cpu_mondo_block_pa = __pa(page);
- tb->cpu_list_pa = __pa(page + 64);
+ tb->cpu_list_pa = __pa(page);
#endif
}
/* smp_64.c */
void __irq_entry smp_call_function_client(int irq, struct pt_regs *regs);
void __irq_entry smp_call_function_single_client(int irq, struct pt_regs *regs);
-void __irq_entry smp_new_mmu_context_version_client(int irq, struct pt_regs *regs);
void __irq_entry smp_penguin_jailcell(int irq, struct pt_regs *regs);
void __irq_entry smp_receive_signal_client(int irq, struct pt_regs *regs);
preempt_enable();
}
-void __irq_entry smp_new_mmu_context_version_client(int irq, struct pt_regs *regs)
-{
- struct mm_struct *mm;
- unsigned long flags;
-
- clear_softint(1 << irq);
-
- /* See if we need to allocate a new TLB context because
- * the version of the one we are using is now out of date.
- */
- mm = current->active_mm;
- if (unlikely(!mm || (mm == &init_mm)))
- return;
-
- spin_lock_irqsave(&mm->context.lock, flags);
-
- if (unlikely(!CTX_VALID(mm->context)))
- get_new_mmu_context(mm);
-
- spin_unlock_irqrestore(&mm->context.lock, flags);
-
- load_secondary_context(mm);
- __flush_tlb_mm(CTX_HWBITS(mm->context),
- SECONDARY_CONTEXT);
-}
-
-void smp_new_mmu_context_version(void)
-{
- smp_cross_call(&xcall_new_mmu_context_version, 0, 0, 0);
-}
-
#ifdef CONFIG_KGDB
void kgdb_roundup_cpus(unsigned long flags)
{
.type copy_tsb,#function
copy_tsb: /* %o0=old_tsb_base, %o1=old_tsb_size
* %o2=new_tsb_base, %o3=new_tsb_size
+ * %o4=page_size_shift
*/
sethi %uhi(TSB_PASS_BITS), %g7
srlx %o3, 4, %o3
- add %o0, %o1, %g1 /* end of old tsb */
+ add %o0, %o1, %o1 /* end of old tsb */
sllx %g7, 32, %g7
sub %o3, 1, %o3 /* %o3 == new tsb hash mask */
+ mov %o4, %g1 /* page_size_shift */
+
661: prefetcha [%o0] ASI_N, #one_read
.section .tsb_phys_patch, "ax"
.word 661b
/* This can definitely be computed faster... */
srlx %o0, 4, %o5 /* Build index */
and %o5, 511, %o5 /* Mask index */
- sllx %o5, PAGE_SHIFT, %o5 /* Put into vaddr position */
+ sllx %o5, %g1, %o5 /* Put into vaddr position */
or %o4, %o5, %o4 /* Full VADDR. */
- srlx %o4, PAGE_SHIFT, %o4 /* Shift down to create index */
+ srlx %o4, %g1, %o4 /* Shift down to create index */
and %o4, %o3, %o4 /* Mask with new_tsb_nents-1 */
sllx %o4, 4, %o4 /* Shift back up into tsb ent offset */
TSB_STORE(%o2 + %o4, %g2) /* Store TAG */
TSB_STORE(%o2 + %o4, %g3) /* Store TTE */
80: add %o0, 16, %o0
- cmp %o0, %g1
+ cmp %o0, %o1
bne,pt %xcc, 90b
nop
tl0_irq1: TRAP_IRQ(smp_call_function_client, 1)
tl0_irq2: TRAP_IRQ(smp_receive_signal_client, 2)
tl0_irq3: TRAP_IRQ(smp_penguin_jailcell, 3)
-tl0_irq4: TRAP_IRQ(smp_new_mmu_context_version_client, 4)
+tl0_irq4: BTRAP(0x44)
#else
tl0_irq1: BTRAP(0x41)
tl0_irq2: BTRAP(0x42)
if (!id) {
dev_set_name(&vdev->dev, "%s", bus_id_name);
vdev->dev_no = ~(u64)0;
+ vdev->id = ~(u64)0;
} else if (!cfg_handle) {
dev_set_name(&vdev->dev, "%s-%llu", bus_id_name, *id);
vdev->dev_no = *id;
+ vdev->id = ~(u64)0;
} else {
dev_set_name(&vdev->dev, "%s-%llu-%llu", bus_id_name,
*cfg_handle, *id);
vdev->dev_no = *cfg_handle;
+ vdev->id = *id;
}
vdev->dev.parent = parent;
(void) vio_create_one(hp, node, &root_vdev->dev);
}
+struct vio_md_node_query {
+ const char *type;
+ u64 dev_no;
+ u64 id;
+};
+
static int vio_md_node_match(struct device *dev, void *arg)
{
+ struct vio_md_node_query *query = (struct vio_md_node_query *) arg;
struct vio_dev *vdev = to_vio_dev(dev);
- if (vdev->mp == (u64) arg)
- return 1;
+ if (vdev->dev_no != query->dev_no)
+ return 0;
+ if (vdev->id != query->id)
+ return 0;
+ if (strcmp(vdev->type, query->type))
+ return 0;
- return 0;
+ return 1;
}
static void vio_remove(struct mdesc_handle *hp, u64 node)
{
+ const char *type;
+ const u64 *id, *cfg_handle;
+ u64 a;
+ struct vio_md_node_query query;
struct device *dev;
- dev = device_find_child(&root_vdev->dev, (void *) node,
+ type = mdesc_get_property(hp, node, "device-type", NULL);
+ if (!type) {
+ type = mdesc_get_property(hp, node, "name", NULL);
+ if (!type)
+ type = mdesc_node_name(hp, node);
+ }
+
+ query.type = type;
+
+ id = mdesc_get_property(hp, node, "id", NULL);
+ cfg_handle = NULL;
+ mdesc_for_each_arc(a, hp, node, MDESC_ARC_TYPE_BACK) {
+ u64 target;
+
+ target = mdesc_arc_target(hp, a);
+ cfg_handle = mdesc_get_property(hp, target,
+ "cfg-handle", NULL);
+ if (cfg_handle)
+ break;
+ }
+
+ if (!id) {
+ query.dev_no = ~(u64)0;
+ query.id = ~(u64)0;
+ } else if (!cfg_handle) {
+ query.dev_no = *id;
+ query.id = ~(u64)0;
+ } else {
+ query.dev_no = *cfg_handle;
+ query.id = *id;
+ }
+
+ dev = device_find_child(&root_vdev->dev, &query,
vio_md_node_match);
if (dev) {
printk(KERN_INFO "VIO: Removing device %s\n", dev_name(dev));
device_unregister(dev);
put_device(dev);
+ } else {
+ if (!id)
+ printk(KERN_ERR "VIO: Removed unknown %s node.\n",
+ type);
+ else if (!cfg_handle)
+ printk(KERN_ERR "VIO: Removed unknown %s node %llu.\n",
+ type, *id);
+ else
+ printk(KERN_ERR "VIO: Removed unknown %s node %llu-%llu.\n",
+ type, *cfg_handle, *id);
}
}
lib-$(CONFIG_SPARC64) += atomic_64.o
lib-$(CONFIG_SPARC32) += lshrdi3.o ashldi3.o
lib-$(CONFIG_SPARC32) += muldi3.o bitext.o cmpdi2.o
+lib-$(CONFIG_SPARC64) += multi3.o
lib-$(CONFIG_SPARC64) += copy_page.o clear_page.o bzero.o
lib-$(CONFIG_SPARC64) += csum_copy.o csum_copy_from_user.o csum_copy_to_user.o
--- /dev/null
+#include <linux/linkage.h>
+#include <asm/export.h>
+
+ .text
+ .align 4
+ENTRY(__multi3) /* %o0 = u, %o1 = v */
+ mov %o1, %g1
+ srl %o3, 0, %g4
+ mulx %g4, %g1, %o1
+ srlx %g1, 0x20, %g3
+ mulx %g3, %g4, %g5
+ sllx %g5, 0x20, %o5
+ srl %g1, 0, %g4
+ sub %o1, %o5, %o5
+ srlx %o5, 0x20, %o5
+ addcc %g5, %o5, %g5
+ srlx %o3, 0x20, %o5
+ mulx %g4, %o5, %g4
+ mulx %g3, %o5, %o5
+ sethi %hi(0x80000000), %g3
+ addcc %g5, %g4, %g5
+ srlx %g5, 0x20, %g5
+ add %g3, %g3, %g3
+ movcc %xcc, %g0, %g3
+ addcc %o5, %g5, %o5
+ sllx %g4, 0x20, %g4
+ add %o1, %g4, %o1
+ add %o5, %g3, %g2
+ mulx %g1, %o2, %g1
+ add %g1, %g2, %g1
+ mulx %o0, %o3, %o0
+ retl
+ add %g1, %o0, %o0
+ENDPROC(__multi3)
+EXPORT_SYMBOL(__multi3)
}
if ((hv_pgsz_mask & cpu_pgsz_mask) == 0U) {
- pr_warn("hugepagesz=%llu not supported by MMU.\n",
+ hugetlb_bad_size();
+ pr_err("hugepagesz=%llu not supported by MMU.\n",
hugepage_size);
goto out;
}
/* get_new_mmu_context() uses "cache + 1". */
DEFINE_SPINLOCK(ctx_alloc_lock);
-unsigned long tlb_context_cache = CTX_FIRST_VERSION - 1;
+unsigned long tlb_context_cache = CTX_FIRST_VERSION;
#define MAX_CTX_NR (1UL << CTX_NR_BITS)
#define CTX_BMAP_SLOTS BITS_TO_LONGS(MAX_CTX_NR)
DECLARE_BITMAP(mmu_context_bmap, MAX_CTX_NR);
+DEFINE_PER_CPU(struct mm_struct *, per_cpu_secondary_mm) = {0};
+
+static void mmu_context_wrap(void)
+{
+ unsigned long old_ver = tlb_context_cache & CTX_VERSION_MASK;
+ unsigned long new_ver, new_ctx, old_ctx;
+ struct mm_struct *mm;
+ int cpu;
+
+ bitmap_zero(mmu_context_bmap, 1 << CTX_NR_BITS);
+
+ /* Reserve kernel context */
+ set_bit(0, mmu_context_bmap);
+
+ new_ver = (tlb_context_cache & CTX_VERSION_MASK) + CTX_FIRST_VERSION;
+ if (unlikely(new_ver == 0))
+ new_ver = CTX_FIRST_VERSION;
+ tlb_context_cache = new_ver;
+
+ /*
+ * Make sure that any new mm that are added into per_cpu_secondary_mm,
+ * are going to go through get_new_mmu_context() path.
+ */
+ mb();
+
+ /*
+ * Updated versions to current on those CPUs that had valid secondary
+ * contexts
+ */
+ for_each_online_cpu(cpu) {
+ /*
+ * If a new mm is stored after we took this mm from the array,
+ * it will go into get_new_mmu_context() path, because we
+ * already bumped the version in tlb_context_cache.
+ */
+ mm = per_cpu(per_cpu_secondary_mm, cpu);
+
+ if (unlikely(!mm || mm == &init_mm))
+ continue;
+
+ old_ctx = mm->context.sparc64_ctx_val;
+ if (likely((old_ctx & CTX_VERSION_MASK) == old_ver)) {
+ new_ctx = (old_ctx & ~CTX_VERSION_MASK) | new_ver;
+ set_bit(new_ctx & CTX_NR_MASK, mmu_context_bmap);
+ mm->context.sparc64_ctx_val = new_ctx;
+ }
+ }
+}
/* Caller does TLB context flushing on local CPU if necessary.
* The caller also ensures that CTX_VALID(mm->context) is false.
{
unsigned long ctx, new_ctx;
unsigned long orig_pgsz_bits;
- int new_version;
spin_lock(&ctx_alloc_lock);
+retry:
+ /* wrap might have happened, test again if our context became valid */
+ if (unlikely(CTX_VALID(mm->context)))
+ goto out;
orig_pgsz_bits = (mm->context.sparc64_ctx_val & CTX_PGSZ_MASK);
ctx = (tlb_context_cache + 1) & CTX_NR_MASK;
new_ctx = find_next_zero_bit(mmu_context_bmap, 1 << CTX_NR_BITS, ctx);
- new_version = 0;
if (new_ctx >= (1 << CTX_NR_BITS)) {
new_ctx = find_next_zero_bit(mmu_context_bmap, ctx, 1);
if (new_ctx >= ctx) {
- int i;
- new_ctx = (tlb_context_cache & CTX_VERSION_MASK) +
- CTX_FIRST_VERSION;
- if (new_ctx == 1)
- new_ctx = CTX_FIRST_VERSION;
-
- /* Don't call memset, for 16 entries that's just
- * plain silly...
- */
- mmu_context_bmap[0] = 3;
- mmu_context_bmap[1] = 0;
- mmu_context_bmap[2] = 0;
- mmu_context_bmap[3] = 0;
- for (i = 4; i < CTX_BMAP_SLOTS; i += 4) {
- mmu_context_bmap[i + 0] = 0;
- mmu_context_bmap[i + 1] = 0;
- mmu_context_bmap[i + 2] = 0;
- mmu_context_bmap[i + 3] = 0;
- }
- new_version = 1;
- goto out;
+ mmu_context_wrap();
+ goto retry;
}
}
+ if (mm->context.sparc64_ctx_val)
+ cpumask_clear(mm_cpumask(mm));
mmu_context_bmap[new_ctx>>6] |= (1UL << (new_ctx & 63));
new_ctx |= (tlb_context_cache & CTX_VERSION_MASK);
-out:
tlb_context_cache = new_ctx;
mm->context.sparc64_ctx_val = new_ctx | orig_pgsz_bits;
+out:
spin_unlock(&ctx_alloc_lock);
-
- if (unlikely(new_version))
- smp_new_mmu_context_version();
}
static int numa_enabled = 1;
extern void copy_tsb(unsigned long old_tsb_base,
unsigned long old_tsb_size,
unsigned long new_tsb_base,
- unsigned long new_tsb_size);
+ unsigned long new_tsb_size,
+ unsigned long page_size_shift);
unsigned long old_tsb_base = (unsigned long) old_tsb;
unsigned long new_tsb_base = (unsigned long) new_tsb;
old_tsb_base = __pa(old_tsb_base);
new_tsb_base = __pa(new_tsb_base);
}
- copy_tsb(old_tsb_base, old_size, new_tsb_base, new_size);
+ copy_tsb(old_tsb_base, old_size, new_tsb_base, new_size,
+ tsb_index == MM_TSB_BASE ?
+ PAGE_SHIFT : REAL_HPAGE_SHIFT);
}
mm->context.tsb_block[tsb_index].tsb = new_tsb;
wr %g0, (1 << PIL_SMP_CAPTURE), %set_softint
retry
- .globl xcall_new_mmu_context_version
-xcall_new_mmu_context_version:
- wr %g0, (1 << PIL_SMP_CTX_NEW_VERSION), %set_softint
- retry
-
#ifdef CONFIG_KGDB
.globl xcall_kgdb_capture
xcall_kgdb_capture:
config SYSVIPC_COMPAT
def_bool y
depends on SYSVIPC
-
-config KEYS_COMPAT
- def_bool y
- depends on KEYS
endif
endmenu
} while (0)
extern int fixup_exception(struct pt_regs *regs, int trapnr);
+extern int fixup_bug(struct pt_regs *regs, int trapnr);
extern bool ex_has_fault_handler(unsigned long ip);
extern void early_fixup_exception(struct pt_regs *regs, int trapnr);
break;
case 4: /* MediaGX/GXm or Geode GXM/GXLV/GX1 */
+ case 11: /* GX1 with inverted Device ID */
#ifdef CONFIG_PCI
{
u32 vendor, device;
show_saved_mc();
+ /* initrd is going away, clear patch ptr. */
+ intel_ucode_patch = NULL;
+
return 0;
}
*/
rcu_irq_exit();
native_safe_halt();
- rcu_irq_enter();
local_irq_disable();
+ rcu_irq_enter();
}
}
if (!n.halted)
return ud == INSN_UD0 || ud == INSN_UD2;
}
-static int fixup_bug(struct pt_regs *regs, int trapnr)
+int fixup_bug(struct pt_regs *regs, int trapnr)
{
if (trapnr != X86_TRAP_UD)
return 0;
static int move_to_next_stateful_cpuid_entry(struct kvm_vcpu *vcpu, int i)
{
struct kvm_cpuid_entry2 *e = &vcpu->arch.cpuid_entries[i];
- int j, nent = vcpu->arch.cpuid_nent;
+ struct kvm_cpuid_entry2 *ej;
+ int j = i;
+ int nent = vcpu->arch.cpuid_nent;
e->flags &= ~KVM_CPUID_FLAG_STATE_READ_NEXT;
/* when no next entry is found, the current entry[i] is reselected */
- for (j = i + 1; ; j = (j + 1) % nent) {
- struct kvm_cpuid_entry2 *ej = &vcpu->arch.cpuid_entries[j];
- if (ej->function == e->function) {
- ej->flags |= KVM_CPUID_FLAG_STATE_READ_NEXT;
- return j;
- }
- }
- return 0; /* silence gcc, even though control never reaches here */
+ do {
+ j = (j + 1) % nent;
+ ej = &vcpu->arch.cpuid_entries[j];
+ } while (ej->function != e->function);
+
+ ej->flags |= KVM_CPUID_FLAG_STATE_READ_NEXT;
+
+ return j;
}
/* find an entry with matching function, matching index (if needed), and that
return kvm_setup_async_pf(vcpu, gva, kvm_vcpu_gfn_to_hva(vcpu, gfn), &arch);
}
-static bool can_do_async_pf(struct kvm_vcpu *vcpu)
+bool kvm_can_do_async_pf(struct kvm_vcpu *vcpu)
{
if (unlikely(!lapic_in_kernel(vcpu) ||
kvm_event_needs_reinjection(vcpu)))
return false;
+ if (is_guest_mode(vcpu))
+ return false;
+
return kvm_x86_ops->interrupt_allowed(vcpu);
}
if (!async)
return false; /* *pfn has correct page already */
- if (!prefault && can_do_async_pf(vcpu)) {
+ if (!prefault && kvm_can_do_async_pf(vcpu)) {
trace_kvm_try_async_get_page(gva, gfn);
if (kvm_find_async_pf_gfn(vcpu, gfn)) {
trace_kvm_async_pf_doublefault(gva, gfn);
void kvm_init_shadow_mmu(struct kvm_vcpu *vcpu);
void kvm_init_shadow_ept_mmu(struct kvm_vcpu *vcpu, bool execonly,
bool accessed_dirty);
+bool kvm_can_do_async_pf(struct kvm_vcpu *vcpu);
static inline unsigned int kvm_mmu_available_pages(struct kvm *kvm)
{
if (!(vmcs12->exception_bitmap & (1u << nr)))
return 0;
- nested_vmx_vmexit(vcpu, to_vmx(vcpu)->exit_reason,
+ nested_vmx_vmexit(vcpu, EXIT_REASON_EXCEPTION_NMI,
vmcs_read32(VM_EXIT_INTR_INFO),
vmcs_readl(EXIT_QUALIFICATION));
return 1;
if (!(vcpu->arch.apf.msr_val & KVM_ASYNC_PF_ENABLED))
return true;
else
- return !kvm_event_needs_reinjection(vcpu) &&
- kvm_x86_ops->interrupt_allowed(vcpu);
+ return kvm_can_do_async_pf(vcpu);
}
void kvm_arch_start_assignment(struct kvm *kvm)
if (fixup_exception(regs, trapnr))
return;
+ if (fixup_bug(regs, trapnr))
+ return;
+
fail:
early_printk("PANIC: early exception 0x%02x IP %lx:%lx error %lx cr2 0x%lx\n",
(unsigned)trapnr, (unsigned long)regs->cs, regs->ip,
static void __init probe_page_size_mask(void)
{
-#if !defined(CONFIG_KMEMCHECK)
/*
* For CONFIG_KMEMCHECK or pagealloc debugging, identity mapping will
* use small pages.
* This will simplify cpa(), which otherwise needs to support splitting
* large pages into small in interrupt context, etc.
*/
- if (boot_cpu_has(X86_FEATURE_PSE) && !debug_pagealloc_enabled())
+ if (boot_cpu_has(X86_FEATURE_PSE) && !debug_pagealloc_enabled() && !IS_ENABLED(CONFIG_KMEMCHECK))
page_size_mask |= 1 << PG_LEVEL_2M;
-#endif
+ else
+ direct_gbpages = 0;
/* Enable PSE if available */
if (boot_cpu_has(X86_FEATURE_PSE))
# define PLATFORM_NR_IRQS 0
#endif
#define XTENSA_NR_IRQS XCHAL_NUM_INTERRUPTS
-#define NR_IRQS (XTENSA_NR_IRQS + VARIANT_NR_IRQS + PLATFORM_NR_IRQS)
+#define NR_IRQS (XTENSA_NR_IRQS + VARIANT_NR_IRQS + PLATFORM_NR_IRQS + 1)
+#define XTENSA_PIC_LINUX_IRQ(hwirq) ((hwirq) + 1)
#if VARIANT_NR_IRQS == 0
static inline void variant_init_irq(void) { }
{
int irq = irq_find_mapping(NULL, hwirq);
- if (hwirq >= NR_IRQS) {
- printk(KERN_EMERG "%s: cannot handle IRQ %d\n",
- __func__, hwirq);
- }
-
#ifdef CONFIG_DEBUG_STACKOVERFLOW
/* Debugging check for stack overflow: is there less than 1KB free? */
{
(ccount_freq/10000) % 100,
loops_per_jiffy/(500000/HZ),
(loops_per_jiffy/(5000/HZ)) % 100);
-
- seq_printf(f,"flags\t\t: "
+ seq_puts(f, "flags\t\t: "
#if XCHAL_HAVE_NMI
"nmi "
#endif
SECTION_VECTOR (.KernelExceptionVector.text, KERNEL_VECTOR_VADDR)
SECTION_VECTOR (.UserExceptionVector.literal, USER_VECTOR_VADDR - 4)
SECTION_VECTOR (.UserExceptionVector.text, USER_VECTOR_VADDR)
- SECTION_VECTOR (.DoubleExceptionVector.literal, DOUBLEEXC_VECTOR_VADDR - 48)
+ SECTION_VECTOR (.DoubleExceptionVector.literal, DOUBLEEXC_VECTOR_VADDR - 20)
SECTION_VECTOR (.DoubleExceptionVector.text, DOUBLEEXC_VECTOR_VADDR)
#endif
.UserExceptionVector.literal)
SECTION_VECTOR (_DoubleExceptionVector_literal,
.DoubleExceptionVector.literal,
- DOUBLEEXC_VECTOR_VADDR - 48,
+ DOUBLEEXC_VECTOR_VADDR - 20,
SIZEOF(.UserExceptionVector.text),
.UserExceptionVector.text)
SECTION_VECTOR (_DoubleExceptionVector_text,
.DoubleExceptionVector.text,
DOUBLEEXC_VECTOR_VADDR,
- 48,
+ 20,
.DoubleExceptionVector.literal)
. = (LOADADDR( .DoubleExceptionVector.text ) + SIZEOF( .DoubleExceptionVector.text ) + 3) & ~ 3;
if (simdisk_count > MAX_SIMDISK_COUNT)
simdisk_count = MAX_SIMDISK_COUNT;
- sddev = kmalloc(simdisk_count * sizeof(struct simdisk),
- GFP_KERNEL);
+ sddev = kmalloc_array(simdisk_count, sizeof(*sddev), GFP_KERNEL);
if (sddev == NULL)
goto out_unregister;
/* Interrupt configuration. */
-#define PLATFORM_NR_IRQS 10
+#define PLATFORM_NR_IRQS 0
/* Default assignment of LX60 devices to external interrupts. */
#ifdef CONFIG_XTENSA_MX
#define DUART16552_INTNUM XCHAL_EXTINT3_NUM
#define OETH_IRQ XCHAL_EXTINT4_NUM
+#define C67X00_IRQ XCHAL_EXTINT8_NUM
#else
#define DUART16552_INTNUM XCHAL_EXTINT0_NUM
#define OETH_IRQ XCHAL_EXTINT1_NUM
+#define C67X00_IRQ XCHAL_EXTINT5_NUM
#endif
/*
#define C67X00_PADDR (XCHAL_KIO_PADDR + 0x0D0D0000)
#define C67X00_SIZE 0x10
-#define C67X00_IRQ 5
+
#endif /* __XTENSA_XTAVNET_HARDWARE_H */
.flags = IORESOURCE_MEM,
},
[2] = { /* IRQ number */
- .start = OETH_IRQ,
- .end = OETH_IRQ,
+ .start = XTENSA_PIC_LINUX_IRQ(OETH_IRQ),
+ .end = XTENSA_PIC_LINUX_IRQ(OETH_IRQ),
.flags = IORESOURCE_IRQ,
},
};
.flags = IORESOURCE_MEM,
},
[1] = { /* IRQ number */
- .start = C67X00_IRQ,
- .end = C67X00_IRQ,
+ .start = XTENSA_PIC_LINUX_IRQ(C67X00_IRQ),
+ .end = XTENSA_PIC_LINUX_IRQ(C67X00_IRQ),
.flags = IORESOURCE_IRQ,
},
};
static struct plat_serial8250_port serial_platform_data[] = {
[0] = {
.mapbase = DUART16552_PADDR,
- .irq = DUART16552_INTNUM,
+ .irq = XTENSA_PIC_LINUX_IRQ(DUART16552_INTNUM),
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
UPF_IOREMAP,
.iotype = XCHAL_HAVE_BE ? UPIO_MEM32BE : UPIO_MEM32,
BFQG_FLAG_FNS(empty)
#undef BFQG_FLAG_FNS
-/* This should be called with the queue_lock held. */
+/* This should be called with the scheduler lock held. */
static void bfqg_stats_update_group_wait_time(struct bfqg_stats *stats)
{
unsigned long long now;
bfqg_stats_clear_waiting(stats);
}
-/* This should be called with the queue_lock held. */
+/* This should be called with the scheduler lock held. */
static void bfqg_stats_set_start_group_wait_time(struct bfq_group *bfqg,
struct bfq_group *curr_bfqg)
{
bfqg_stats_mark_waiting(stats);
}
-/* This should be called with the queue_lock held. */
+/* This should be called with the scheduler lock held. */
static void bfqg_stats_end_empty_time(struct bfqg_stats *stats)
{
unsigned long long now;
static void bfqg_get(struct bfq_group *bfqg)
{
- return blkg_get(bfqg_to_blkg(bfqg));
+ bfqg->ref++;
}
void bfqg_put(struct bfq_group *bfqg)
{
- return blkg_put(bfqg_to_blkg(bfqg));
+ bfqg->ref--;
+
+ if (bfqg->ref == 0)
+ kfree(bfqg);
+}
+
+static void bfqg_and_blkg_get(struct bfq_group *bfqg)
+{
+ /* see comments in bfq_bic_update_cgroup for why refcounting bfqg */
+ bfqg_get(bfqg);
+
+ blkg_get(bfqg_to_blkg(bfqg));
+}
+
+void bfqg_and_blkg_put(struct bfq_group *bfqg)
+{
+ bfqg_put(bfqg);
+
+ blkg_put(bfqg_to_blkg(bfqg));
}
void bfqg_stats_update_io_add(struct bfq_group *bfqg, struct bfq_queue *bfqq,
if (bfqq) {
bfqq->ioprio = bfqq->new_ioprio;
bfqq->ioprio_class = bfqq->new_ioprio_class;
- bfqg_get(bfqg);
+ /*
+ * Make sure that bfqg and its associated blkg do not
+ * disappear before entity.
+ */
+ bfqg_and_blkg_get(bfqg);
}
entity->parent = bfqg->my_entity; /* NULL for root group */
entity->sched_data = &bfqg->sched_data;
return NULL;
}
+ /* see comments in bfq_bic_update_cgroup for why refcounting */
+ bfqg_get(bfqg);
return &bfqg->pd;
}
struct bfq_group *bfqg = pd_to_bfqg(pd);
bfqg_stats_exit(&bfqg->stats);
- return kfree(bfqg);
+ bfqg_put(bfqg);
}
void bfq_pd_reset_stats(struct blkg_policy_data *pd)
* Move @bfqq to @bfqg, deactivating it from its old group and reactivating
* it on the new one. Avoid putting the entity on the old group idle tree.
*
- * Must be called under the queue lock; the cgroup owning @bfqg must
- * not disappear (by now this just means that we are called under
- * rcu_read_lock()).
+ * Must be called under the scheduler lock, to make sure that the blkg
+ * owning @bfqg does not disappear (see comments in
+ * bfq_bic_update_cgroup on guaranteeing the consistency of blkg
+ * objects).
*/
void bfq_bfqq_move(struct bfq_data *bfqd, struct bfq_queue *bfqq,
struct bfq_group *bfqg)
bfq_deactivate_bfqq(bfqd, bfqq, false, false);
else if (entity->on_st)
bfq_put_idle_entity(bfq_entity_service_tree(entity), entity);
- bfqg_put(bfqq_group(bfqq));
+ bfqg_and_blkg_put(bfqq_group(bfqq));
- /*
- * Here we use a reference to bfqg. We don't need a refcounter
- * as the cgroup reference will not be dropped, so that its
- * destroy() callback will not be invoked.
- */
entity->parent = bfqg->my_entity;
entity->sched_data = &bfqg->sched_data;
- bfqg_get(bfqg);
+ /* pin down bfqg and its associated blkg */
+ bfqg_and_blkg_get(bfqg);
if (bfq_bfqq_busy(bfqq)) {
bfq_pos_tree_add_move(bfqd, bfqq);
* @bic: the bic to move.
* @blkcg: the blk-cgroup to move to.
*
- * Move bic to blkcg, assuming that bfqd->queue is locked; the caller
- * has to make sure that the reference to cgroup is valid across the call.
+ * Move bic to blkcg, assuming that bfqd->lock is held; which makes
+ * sure that the reference to cgroup is valid across the call (see
+ * comments in bfq_bic_update_cgroup on this issue)
*
* NOTE: an alternative approach might have been to store the current
* cgroup in bfqq and getting a reference to it, reducing the lookup
goto out;
bfqg = __bfq_bic_change_cgroup(bfqd, bic, bio_blkcg(bio));
+ /*
+ * Update blkg_path for bfq_log_* functions. We cache this
+ * path, and update it here, for the following
+ * reasons. Operations on blkg objects in blk-cgroup are
+ * protected with the request_queue lock, and not with the
+ * lock that protects the instances of this scheduler
+ * (bfqd->lock). This exposes BFQ to the following sort of
+ * race.
+ *
+ * The blkg_lookup performed in bfq_get_queue, protected
+ * through rcu, may happen to return the address of a copy of
+ * the original blkg. If this is the case, then the
+ * bfqg_and_blkg_get performed in bfq_get_queue, to pin down
+ * the blkg, is useless: it does not prevent blk-cgroup code
+ * from destroying both the original blkg and all objects
+ * directly or indirectly referred by the copy of the
+ * blkg.
+ *
+ * On the bright side, destroy operations on a blkg invoke, as
+ * a first step, hooks of the scheduler associated with the
+ * blkg. And these hooks are executed with bfqd->lock held for
+ * BFQ. As a consequence, for any blkg associated with the
+ * request queue this instance of the scheduler is attached
+ * to, we are guaranteed that such a blkg is not destroyed, and
+ * that all the pointers it contains are consistent, while we
+ * are holding bfqd->lock. A blkg_lookup performed with
+ * bfqd->lock held then returns a fully consistent blkg, which
+ * remains consistent until this lock is held.
+ *
+ * Thanks to the last fact, and to the fact that: (1) bfqg has
+ * been obtained through a blkg_lookup in the above
+ * assignment, and (2) bfqd->lock is being held, here we can
+ * safely use the policy data for the involved blkg (i.e., the
+ * field bfqg->pd) to get to the blkg associated with bfqg,
+ * and then we can safely use any field of blkg. After we
+ * release bfqd->lock, even just getting blkg through this
+ * bfqg may cause dangling references to be traversed, as
+ * bfqg->pd may not exist any more.
+ *
+ * In view of the above facts, here we cache, in the bfqg, any
+ * blkg data we may need for this bic, and for its associated
+ * bfq_queue. As of now, we need to cache only the path of the
+ * blkg, which is used in the bfq_log_* functions.
+ *
+ * Finally, note that bfqg itself needs to be protected from
+ * destruction on the blkg_free of the original blkg (which
+ * invokes bfq_pd_free). We use an additional private
+ * refcounter for bfqg, to let it disappear only after no
+ * bfq_queue refers to it any longer.
+ */
+ blkg_path(bfqg_to_blkg(bfqg), bfqg->blkg_path, sizeof(bfqg->blkg_path));
bic->blkcg_serial_nr = serial_nr;
out:
rcu_read_unlock();
* @bfqd: the device data structure with the root group.
* @bfqg: the group to move from.
* @st: the service tree with the entities.
- *
- * Needs queue_lock to be taken and reference to be valid over the call.
*/
static void bfq_reparent_active_entities(struct bfq_data *bfqd,
struct bfq_group *bfqg,
/*
* The idle tree may still contain bfq_queues belonging
* to exited task because they never migrated to a different
- * cgroup from the one being destroyed now. No one else
- * can access them so it's safe to act without any lock.
+ * cgroup from the one being destroyed now.
*/
bfq_flush_idle_tree(st);
kmem_cache_free(bfq_pool, bfqq);
#ifdef CONFIG_BFQ_GROUP_IOSCHED
- bfqg_put(bfqg);
+ bfqg_and_blkg_put(bfqg);
#endif
}
/* must be the first member */
struct blkg_policy_data pd;
git.codelabs.ch / muen / linux.git / commitdiff