Returns 1 if the psl timebase register is synchronized
with the core timebase register, 0 otherwise.
Users: https://github.com/ibm-capi/libcxl
+
+What: /sys/class/cxl/<card>/tunneled_ops_supported
+Date: May 2018
+Contact: linuxppc-dev@lists.ozlabs.org
+Description: read only
+ Returns 1 if tunneled operations are supported in capi mode,
+ 0 otherwise.
+Users: https://github.com/ibm-capi/libcxl
/sys/devices/system/cpu/vulnerabilities/meltdown
/sys/devices/system/cpu/vulnerabilities/spectre_v1
/sys/devices/system/cpu/vulnerabilities/spectre_v2
+ /sys/devices/system/cpu/vulnerabilities/spec_store_bypass
Date: January 2018
Contact: Linux kernel mailing list <linux-kernel@vger.kernel.org>
Description: Information about CPU vulnerabilities
allow data leaks with this option, which is equivalent
to spectre_v2=off.
+ nospec_store_bypass_disable
+ [HW] Disable all mitigations for the Speculative Store Bypass vulnerability
+
noxsave [BUGS=X86] Disables x86 extended register state save
and restore using xsave. The kernel will fallback to
enabling legacy floating-point and sse state.
Not specifying this option is equivalent to
spectre_v2=auto.
+ spec_store_bypass_disable=
+ [HW] Control Speculative Store Bypass (SSB) Disable mitigation
+ (Speculative Store Bypass vulnerability)
+
+ Certain CPUs are vulnerable to an exploit against a
+ a common industry wide performance optimization known
+ as "Speculative Store Bypass" in which recent stores
+ to the same memory location may not be observed by
+ later loads during speculative execution. The idea
+ is that such stores are unlikely and that they can
+ be detected prior to instruction retirement at the
+ end of a particular speculation execution window.
+
+ In vulnerable processors, the speculatively forwarded
+ store can be used in a cache side channel attack, for
+ example to read memory to which the attacker does not
+ directly have access (e.g. inside sandboxed code).
+
+ This parameter controls whether the Speculative Store
+ Bypass optimization is used.
+
+ on - Unconditionally disable Speculative Store Bypass
+ off - Unconditionally enable Speculative Store Bypass
+ auto - Kernel detects whether the CPU model contains an
+ implementation of Speculative Store Bypass and
+ picks the most appropriate mitigation. If the
+ CPU is not vulnerable, "off" is selected. If the
+ CPU is vulnerable the default mitigation is
+ architecture and Kconfig dependent. See below.
+ prctl - Control Speculative Store Bypass per thread
+ via prctl. Speculative Store Bypass is enabled
+ for a process by default. The state of the control
+ is inherited on fork.
+ seccomp - Same as "prctl" above, but all seccomp threads
+ will disable SSB unless they explicitly opt out.
+
+ Not specifying this option is equivalent to
+ spec_store_bypass_disable=auto.
+
+ Default mitigations:
+ X86: If CONFIG_SECCOMP=y "seccomp", otherwise "prctl"
+
spia_io_base= [HW,MTD]
spia_fio_base=
spia_pedr=
In this mode ``intel_pstate`` registers utilization update callbacks with the
CPU scheduler in order to run a P-state selection algorithm, either
-``powersave`` or ``performance``, depending on the ``scaling_cur_freq`` policy
+``powersave`` or ``performance``, depending on the ``scaling_governor`` policy
setting in ``sysfs``. The current CPU frequency information to be made
available from the ``scaling_cur_freq`` policy attribute in ``sysfs`` is
periodically updated by those utilization update callbacks too.
==================================
Depending on its configuration and the capabilities of the platform it runs on,
-the Linux kernel can support up to four system sleep states, includig
+the Linux kernel can support up to four system sleep states, including
hibernation and up to three variants of system suspend. The sleep states that
can be supported by the kernel are listed below.
data device, but just remove the mapping.
read_only: Don't allow any changes to be made to the pool
- metadata.
+ metadata. This mode is only available after the
+ thin-pool has been created and first used in full
+ read/write mode. It cannot be specified on initial
+ thin-pool creation.
error_if_no_space: Error IOs, instead of queueing, if no space.
Optional properties:
- dma-coherent : Present if dma operations are coherent
- clocks : a list of phandle + clock specifier pairs
-- resets : a list of phandle + reset specifier pairs
- target-supply : regulator for SATA target power
- phys : reference to the SATA PHY node
- phy-names : must be "sata-phy"
require specific display timings. The panel-timing subnode expresses those
timings as specified in the timing subnode section of the display timing
bindings defined in
- Documentation/devicetree/bindings/display/display-timing.txt.
+ Documentation/devicetree/bindings/display/panel/display-timing.txt.
Connectivity
- "renesas,dmac-r8a7794" (R-Car E2)
- "renesas,dmac-r8a7795" (R-Car H3)
- "renesas,dmac-r8a7796" (R-Car M3-W)
+ - "renesas,dmac-r8a77965" (R-Car M3-N)
- "renesas,dmac-r8a77970" (R-Car V3M)
- "renesas,dmac-r8a77980" (R-Car V3H)
- compatible: Must contain one or more of the following:
- "renesas,rcar-gen3-canfd" for R-Car Gen3 compatible controller.
- "renesas,r8a7795-canfd" for R8A7795 (R-Car H3) compatible controller.
- - "renesas,r8a7796-canfd" for R8A7796 (R-Car M3) compatible controller.
+ - "renesas,r8a7796-canfd" for R8A7796 (R-Car M3-W) compatible controller.
+ - "renesas,r8a77970-canfd" for R8A77970 (R-Car V3M) compatible controller.
+ - "renesas,r8a77980-canfd" for R8A77980 (R-Car V3H) compatible controller.
When compatible with the generic version, nodes must list the
SoC-specific version corresponding to the platform first, followed by the
"brcm,bcm53128"
"brcm,bcm5365"
"brcm,bcm5395"
+ "brcm,bcm5389"
"brcm,bcm5397"
"brcm,bcm5398"
- main controller clock (for both armada-375-pp2 and armada-7k-pp2)
- GOP clock (for both armada-375-pp2 and armada-7k-pp2)
- MG clock (only for armada-7k-pp2)
+ - MG Core clock (only for armada-7k-pp2)
- AXI clock (only for armada-7k-pp2)
-- clock-names: names of used clocks, must be "pp_clk", "gop_clk", "mg_clk"
- and "axi_clk" (the 2 latter only for armada-7k-pp2).
+- clock-names: names of used clocks, must be "pp_clk", "gop_clk", "mg_clk",
+ "mg_core_clk" and "axi_clk" (the 3 latter only for armada-7k-pp2).
The ethernet ports are represented by subnodes. At least one port is
required.
compatible = "marvell,armada-7k-pp22";
reg = <0x0 0x100000>, <0x129000 0xb000>;
clocks = <&cpm_syscon0 1 3>, <&cpm_syscon0 1 9>,
- <&cpm_syscon0 1 5>, <&cpm_syscon0 1 18>;
- clock-names = "pp_clk", "gop_clk", "gp_clk", "axi_clk";
+ <&cpm_syscon0 1 5>, <&cpm_syscon0 1 6>, <&cpm_syscon0 1 18>;
+ clock-names = "pp_clk", "gop_clk", "mg_clk", "mg_core_clk", "axi_clk";
eth0: eth0 {
interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>,
- txd2-skew-ps : Skew control of TX data 2 pad
- txd3-skew-ps : Skew control of TX data 3 pad
+ - micrel,force-master:
+ Boolean, force phy to master mode. Only set this option if the phy
+ reference clock provided at CLK125_NDO pin is used as MAC reference
+ clock because the clock jitter in slave mode is to high (errata#2).
+ Attention: The link partner must be configurable as slave otherwise
+ no link will be established.
+
Examples:
mdio {
- "renesas,etheravb-r8a7795" for the R8A7795 SoC.
- "renesas,etheravb-r8a7796" for the R8A7796 SoC.
+ - "renesas,etheravb-r8a77965" for the R8A77965 SoC.
- "renesas,etheravb-r8a77970" for the R8A77970 SoC.
- "renesas,etheravb-r8a77980" for the R8A77980 SoC.
- "renesas,etheravb-r8a77995" for the R8A77995 SoC.
configuration, drive strength and pullups. If one of these options is
not set, its actual value will be unspecified.
-This driver supports the generic pin multiplexing and configuration
-bindings. For details on each properties, you can refer to
-./pinctrl-bindings.txt.
+Allwinner A1X Pin Controller supports the generic pin multiplexing and
+configuration bindings. For details on each properties, you can refer to
+ ./pinctrl-bindings.txt.
Required sub-node properties:
- pins
- "renesas,hscif-r8a7795" for R8A7795 (R-Car H3) HSCIF compatible UART.
- "renesas,scif-r8a7796" for R8A7796 (R-Car M3-W) SCIF compatible UART.
- "renesas,hscif-r8a7796" for R8A7796 (R-Car M3-W) HSCIF compatible UART.
+ - "renesas,scif-r8a77965" for R8A77965 (R-Car M3-N) SCIF compatible UART.
+ - "renesas,hscif-r8a77965" for R8A77965 (R-Car M3-N) HSCIF compatible UART.
- "renesas,scif-r8a77970" for R8A77970 (R-Car V3M) SCIF compatible UART.
- "renesas,hscif-r8a77970" for R8A77970 (R-Car V3M) HSCIF compatible UART.
- "renesas,scif-r8a77980" for R8A77980 (R-Car V3H) SCIF compatible UART.
keithkoep Keith & Koep GmbH
keymile Keymile GmbH
khadas Khadas
+kiebackpeter Kieback & Peter GmbH
kinetic Kinetic Technologies
kingnovel Kingnovel Technology Co., Ltd.
kosagi Sutajio Ko-Usagi PTE Ltd.
of_overlay_remove_all() which will remove every single one in the correct
order.
+In addition, there is the option to register notifiers that get called on
+overlay operations. See of_overlay_notifier_register/unregister and
+enum of_overlay_notify_action for details.
+
+Note that a notifier callback is not supposed to store pointers to a device
+tree node or its content beyond OF_OVERLAY_POST_REMOVE corresponding to the
+respective node it received.
+
Overlay DTS Format
------------------
****
-Report bugs to Mauro Carvalho Chehab <mchehab@s-opensource.com>
+Report bugs to Mauro Carvalho Chehab <mchehab@kernel.org>
COPYRIGHT
*********
-Copyright (c) 2016 by Mauro Carvalho Chehab <mchehab@s-opensource.com>.
+Copyright (c) 2016 by Mauro Carvalho Chehab <mchehab+samsung@kernel.org>.
License GPLv2: GNU GPL version 2 <http://gnu.org/licenses/gpl.html>.
/* keytable.c - This program allows checking/replacing keys at IR
- Copyright (C) 2006-2009 Mauro Carvalho Chehab <mchehab@infradead.org>
+ Copyright (C) 2006-2009 Mauro Carvalho Chehab <mchehab@kernel.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
.. code-block:: c
/* V4L2 video picture grabber
- Copyright (C) 2009 Mauro Carvalho Chehab <mchehab@infradead.org>
+ Copyright (C) 2009 Mauro Carvalho Chehab <mchehab@kernel.org>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
The ioctl calls available on an instance of /dev/ppp attached to a
channel are:
-* PPPIOCDETACH detaches the instance from the channel. This ioctl is
- deprecated since the same effect can be achieved by closing the
- instance. In order to prevent possible races this ioctl will fail
- with an EINVAL error if more than one file descriptor refers to this
- instance (i.e. as a result of dup(), dup2() or fork()).
-
* PPPIOCCONNECT connects this channel to a PPP interface. The
argument should point to an int containing the interface unit
number. It will return an EINVAL error if the channel is already
=head1 BUGS
-Report bugs to Mauro Carvalho Chehab <mchehab@s-opensource.com>
+Report bugs to Mauro Carvalho Chehab <mchehab@kernel.org>
=head1 COPYRIGHT
-Copyright (c) 2016 by Mauro Carvalho Chehab <mchehab@s-opensource.com>.
+Copyright (c) 2016 by Mauro Carvalho Chehab <mchehab+samsung@kernel.org>.
License GPLv2: GNU GPL version 2 <http://gnu.org/licenses/gpl.html>.
help. Contact the Chinese maintainer if this translation is outdated
or if there is a problem with the translation.
-Maintainer: Mauro Carvalho Chehab <mchehab@infradead.org>
+Maintainer: Mauro Carvalho Chehab <mchehab@kernel.org>
Chinese maintainer: Fu Wei <tekkamanninja@gmail.com>
---------------------------------------------------------------------
Documentation/video4linux/v4l2-framework.txt 的中文翻译
如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文
交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻
译存在问题，请联系中文版维护者。
-英文版维护者： Mauro Carvalho Chehab <mchehab@infradead.org>
+英文版维护者： Mauro Carvalho Chehab <mchehab@kernel.org>
中文版维护者： 傅炜 Fu Wei <tekkamanninja@gmail.com>
中文版翻译者： 傅炜 Fu Wei <tekkamanninja@gmail.com>
中文版校译者： 傅炜 Fu Wei <tekkamanninja@gmail.com>
no_new_privs
seccomp_filter
unshare
+ spec_ctrl
.. only:: subproject and html
--- /dev/null
+===================
+Speculation Control
+===================
+
+Quite some CPUs have speculation-related misfeatures which are in
+fact vulnerabilities causing data leaks in various forms even across
+privilege domains.
+
+The kernel provides mitigation for such vulnerabilities in various
+forms. Some of these mitigations are compile-time configurable and some
+can be supplied on the kernel command line.
+
+There is also a class of mitigations which are very expensive, but they can
+be restricted to a certain set of processes or tasks in controlled
+environments. The mechanism to control these mitigations is via
+:manpage:`prctl(2)`.
+
+There are two prctl options which are related to this:
+
+ * PR_GET_SPECULATION_CTRL
+
+ * PR_SET_SPECULATION_CTRL
+
+PR_GET_SPECULATION_CTRL
+-----------------------
+
+PR_GET_SPECULATION_CTRL returns the state of the speculation misfeature
+which is selected with arg2 of prctl(2). The return value uses bits 0-3 with
+the following meaning:
+
+==== ===================== ===================================================
+Bit Define Description
+==== ===================== ===================================================
+0 PR_SPEC_PRCTL Mitigation can be controlled per task by
+ PR_SET_SPECULATION_CTRL.
+1 PR_SPEC_ENABLE The speculation feature is enabled, mitigation is
+ disabled.
+2 PR_SPEC_DISABLE The speculation feature is disabled, mitigation is
+ enabled.
+3 PR_SPEC_FORCE_DISABLE Same as PR_SPEC_DISABLE, but cannot be undone. A
+ subsequent prctl(..., PR_SPEC_ENABLE) will fail.
+==== ===================== ===================================================
+
+If all bits are 0 the CPU is not affected by the speculation misfeature.
+
+If PR_SPEC_PRCTL is set, then the per-task control of the mitigation is
+available. If not set, prctl(PR_SET_SPECULATION_CTRL) for the speculation
+misfeature will fail.
+
+PR_SET_SPECULATION_CTRL
+-----------------------
+
+PR_SET_SPECULATION_CTRL allows to control the speculation misfeature, which
+is selected by arg2 of :manpage:`prctl(2)` per task. arg3 is used to hand
+in the control value, i.e. either PR_SPEC_ENABLE or PR_SPEC_DISABLE or
+PR_SPEC_FORCE_DISABLE.
+
+Common error codes
+------------------
+======= =================================================================
+Value Meaning
+======= =================================================================
+EINVAL The prctl is not implemented by the architecture or unused
+ prctl(2) arguments are not 0.
+
+ENODEV arg2 is selecting a not supported speculation misfeature.
+======= =================================================================
+
+PR_SET_SPECULATION_CTRL error codes
+-----------------------------------
+======= =================================================================
+Value Meaning
+======= =================================================================
+0 Success
+
+ERANGE arg3 is incorrect, i.e. it's neither PR_SPEC_ENABLE nor
+ PR_SPEC_DISABLE nor PR_SPEC_FORCE_DISABLE.
+
+ENXIO Control of the selected speculation misfeature is not possible.
+ See PR_GET_SPECULATION_CTRL.
+
+EPERM Speculation was disabled with PR_SPEC_FORCE_DISABLE and caller
+ tried to enable it again.
+======= =================================================================
+
+Speculation misfeature controls
+-------------------------------
+- PR_SPEC_STORE_BYPASS: Speculative Store Bypass
+
+ Invocations:
+ * prctl(PR_GET_SPECULATION_CTRL, PR_SPEC_STORE_BYPASS, 0, 0, 0);
+ * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_STORE_BYPASS, PR_SPEC_ENABLE, 0, 0);
+ * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_STORE_BYPASS, PR_SPEC_DISABLE, 0, 0);
+ * prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_STORE_BYPASS, PR_SPEC_FORCE_DISABLE, 0, 0);
flag || value || meaning
==================================================================================
-KVM_HINTS_DEDICATED || 0 || guest checks this feature bit to
- || || determine if there is vCPU pinning
- || || and there is no vCPU over-commitment,
+KVM_HINTS_REALTIME || 0 || guest checks this feature bit to
+ || || determine that vCPUs are never
+ || || preempted for an unlimited time,
|| || allowing optimizations
----------------------------------------------------------------------------------
F: Documentation/devicetree/bindings/gpio/gpio-ath79.txt
ATHEROS ATH GENERIC UTILITIES
-M: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
+M: Kalle Valo <kvalo@codeaurora.org>
L: linux-wireless@vger.kernel.org
S: Supported
F: drivers/net/wireless/ath/*
F: drivers/net/wireless/ath/ath5k/
ATHEROS ATH6KL WIRELESS DRIVER
-M: Kalle Valo <kvalo@qca.qualcomm.com>
+M: Kalle Valo <kvalo@codeaurora.org>
L: linux-wireless@vger.kernel.org
W: http://wireless.kernel.org/en/users/Drivers/ath6kl
T: git git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
F: sound/soc/atmel/tse850-pcm5142.c
AZ6007 DVB DRIVER
-M: Mauro Carvalho Chehab <mchehab@s-opensource.com>
M: Mauro Carvalho Chehab <mchehab@kernel.org>
L: linux-media@vger.kernel.org
W: https://linuxtv.org
F: include/uapi/linux/btrfs*
BTTV VIDEO4LINUX DRIVER
-M: Mauro Carvalho Chehab <mchehab@s-opensource.com>
M: Mauro Carvalho Chehab <mchehab@kernel.org>
L: linux-media@vger.kernel.org
W: https://linuxtv.org
CPU POWER MONITORING SUBSYSTEM
M: Thomas Renninger <trenn@suse.com>
-M: Shuah Khan <shuahkh@osg.samsung.com>
M: Shuah Khan <shuah@kernel.org>
L: linux-pm@vger.kernel.org
S: Maintained
F: drivers/media/dvb-frontends/cx24120*
CX88 VIDEO4LINUX DRIVER
-M: Mauro Carvalho Chehab <mchehab@s-opensource.com>
M: Mauro Carvalho Chehab <mchehab@kernel.org>
L: linux-media@vger.kernel.org
W: https://linuxtv.org
T: git git://anongit.freedesktop.org/drm/drm-misc
DMA GENERIC OFFLOAD ENGINE SUBSYSTEM
-M: Vinod Koul <vinod.koul@intel.com>
+M: Vinod Koul <vkoul@kernel.org>
L: dmaengine@vger.kernel.org
Q: https://patchwork.kernel.org/project/linux-dmaengine/list/
S: Maintained
EDAC-CORE
M: Borislav Petkov <bp@alien8.de>
-M: Mauro Carvalho Chehab <mchehab@s-opensource.com>
M: Mauro Carvalho Chehab <mchehab@kernel.org>
L: linux-edac@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp.git for-next
F: drivers/edac/fsl_ddr_edac.*
EDAC-GHES
-M: Mauro Carvalho Chehab <mchehab@s-opensource.com>
M: Mauro Carvalho Chehab <mchehab@kernel.org>
L: linux-edac@vger.kernel.org
S: Maintained
F: drivers/edac/i5000_edac.c
EDAC-I5400
-M: Mauro Carvalho Chehab <mchehab@s-opensource.com>
M: Mauro Carvalho Chehab <mchehab@kernel.org>
L: linux-edac@vger.kernel.org
S: Maintained
F: drivers/edac/i5400_edac.c
EDAC-I7300
-M: Mauro Carvalho Chehab <mchehab@s-opensource.com>
M: Mauro Carvalho Chehab <mchehab@kernel.org>
L: linux-edac@vger.kernel.org
S: Maintained
F: drivers/edac/i7300_edac.c
EDAC-I7CORE
-M: Mauro Carvalho Chehab <mchehab@s-opensource.com>
M: Mauro Carvalho Chehab <mchehab@kernel.org>
L: linux-edac@vger.kernel.org
S: Maintained
F: drivers/edac/r82600_edac.c
EDAC-SBRIDGE
-M: Mauro Carvalho Chehab <mchehab@s-opensource.com>
M: Mauro Carvalho Chehab <mchehab@kernel.org>
L: linux-edac@vger.kernel.org
S: Maintained
F: drivers/net/ethernet/ibm/ehea/
EM28XX VIDEO4LINUX DRIVER
-M: Mauro Carvalho Chehab <mchehab@s-opensource.com>
M: Mauro Carvalho Chehab <mchehab@kernel.org>
L: linux-media@vger.kernel.org
W: https://linuxtv.org
F: drivers/iommu/exynos-iommu.c
EZchip NPS platform support
-M: Elad Kanfi <eladkan@mellanox.com>
M: Vineet Gupta <vgupta@synopsys.com>
S: Supported
F: arch/arc/plat-eznps
F: drivers/net/ethernet/huawei/hinic/
HUGETLB FILESYSTEM
-M: Nadia Yvette Chambers <nyc@holomorphy.com>
+M: Mike Kravetz <mike.kravetz@oracle.com>
+L: linux-mm@kvack.org
S: Maintained
F: fs/hugetlbfs/
+F: mm/hugetlb.c
+F: include/linux/hugetlb.h
+F: Documentation/admin-guide/mm/hugetlbpage.rst
+F: Documentation/vm/hugetlbfs_reserv.rst
+F: Documentation/ABI/testing/sysfs-kernel-mm-hugepages
HVA ST MEDIA DRIVER
M: Jean-Christophe Trotin <jean-christophe.trotin@st.com>
S: Maintained
F: Documentation/kbuild/
F: Makefile
-F: scripts/Makefile.*
+F: scripts/Kbuild*
+F: scripts/Makefile*
F: scripts/basic/
F: scripts/mk*
+F: scripts/mod/
F: scripts/package/
KERNEL JANITORS
F: include/uapi/linux/sunrpc/
KERNEL SELFTEST FRAMEWORK
-M: Shuah Khan <shuahkh@osg.samsung.com>
M: Shuah Khan <shuah@kernel.org>
L: linux-kselftest@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git
+Q: https://patchwork.kernel.org/project/linux-kselftest/list/
S: Maintained
F: tools/testing/selftests/
F: Documentation/dev-tools/kselftest*
F: drivers/staging/media/tegra-vde/
MEDIA INPUT INFRASTRUCTURE (V4L/DVB)
-M: Mauro Carvalho Chehab <mchehab@s-opensource.com>
M: Mauro Carvalho Chehab <mchehab@kernel.org>
P: LinuxTV.org Project
L: linux-media@vger.kernel.org
F: drivers/net/ethernet/mellanox/mlx5/core/en_*
MELLANOX ETHERNET INNOVA DRIVER
-M: Ilan Tayari <ilant@mellanox.com>
R: Boris Pismenny <borisp@mellanox.com>
L: netdev@vger.kernel.org
S: Supported
F: include/linux/mlx5/mlx5_ifc_fpga.h
MELLANOX ETHERNET INNOVA IPSEC DRIVER
-M: Ilan Tayari <ilant@mellanox.com>
R: Boris Pismenny <borisp@mellanox.com>
L: netdev@vger.kernel.org
S: Supported
MELLANOX MLX5 core VPI driver
M: Saeed Mahameed <saeedm@mellanox.com>
-M: Matan Barak <matanb@mellanox.com>
M: Leon Romanovsky <leonro@mellanox.com>
L: netdev@vger.kernel.org
L: linux-rdma@vger.kernel.org
F: include/linux/mlx5/
MELLANOX MLX5 IB driver
-M: Matan Barak <matanb@mellanox.com>
M: Leon Romanovsky <leonro@mellanox.com>
L: linux-rdma@vger.kernel.org
W: http://www.mellanox.com
F: net/netfilter/xt_SECMARK.c
NETWORKING [TLS]
-M: Ilya Lesokhin <ilyal@mellanox.com>
M: Aviad Yehezkel <aviadye@mellanox.com>
M: Dave Watson <davejwatson@fb.com>
L: netdev@vger.kernel.org
F: Documentation/devicetree/bindings/net/nfc/
NFS, SUNRPC, AND LOCKD CLIENTS
-M: Trond Myklebust <trond.myklebust@primarydata.com>
+M: Trond Myklebust <trond.myklebust@hammerspace.com>
M: Anna Schumaker <anna.schumaker@netapp.com>
L: linux-nfs@vger.kernel.org
W: http://client.linux-nfs.org
F: drivers/media/tuners/qt1010*
QUALCOMM ATHEROS ATH10K WIRELESS DRIVER
-M: Kalle Valo <kvalo@qca.qualcomm.com>
+M: Kalle Valo <kvalo@codeaurora.org>
L: ath10k@lists.infradead.org
W: http://wireless.kernel.org/en/users/Drivers/ath10k
T: git git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
F: drivers/media/platform/qcom/venus/
QUALCOMM WCN36XX WIRELESS DRIVER
-M: Eugene Krasnikov <k.eugene.e@gmail.com>
+M: Kalle Valo <kvalo@codeaurora.org>
L: wcn36xx@lists.infradead.org
W: http://wireless.kernel.org/en/users/Drivers/wcn36xx
T: git git://github.com/KrasnikovEugene/wcn36xx.git
F: include/uapi/linux/vfio_ccw.h
S390 ZCRYPT DRIVER
-M: Harald Freudenberger <freude@de.ibm.com>
+M: Harald Freudenberger <freude@linux.ibm.com>
L: linux-s390@vger.kernel.org
W: http://www.ibm.com/developerworks/linux/linux390/
S: Supported
F: drivers/media/i2c/saa6588*
SAA7134 VIDEO4LINUX DRIVER
-M: Mauro Carvalho Chehab <mchehab@s-opensource.com>
M: Mauro Carvalho Chehab <mchehab@kernel.org>
L: linux-media@vger.kernel.org
W: https://linuxtv.org
F: drivers/media/radio/si4713/radio-usb-si4713.c
SIANO DVB DRIVER
-M: Mauro Carvalho Chehab <mchehab@s-opensource.com>
M: Mauro Carvalho Chehab <mchehab@kernel.org>
L: linux-media@vger.kernel.org
W: https://linuxtv.org
S: Maintained
F: arch/alpha/kernel/srm_env.c
+ST STM32 I2C/SMBUS DRIVER
+M: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
+L: linux-i2c@vger.kernel.org
+S: Maintained
+F: drivers/i2c/busses/i2c-stm32*
+
STABLE BRANCH
M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
L: stable@vger.kernel.org
F: drivers/media/i2c/tda9840*
TEA5761 TUNER DRIVER
-M: Mauro Carvalho Chehab <mchehab@s-opensource.com>
M: Mauro Carvalho Chehab <mchehab@kernel.org>
L: linux-media@vger.kernel.org
W: https://linuxtv.org
F: drivers/media/tuners/tea5761.*
TEA5767 TUNER DRIVER
-M: Mauro Carvalho Chehab <mchehab@s-opensource.com>
M: Mauro Carvalho Chehab <mchehab@kernel.org>
L: linux-media@vger.kernel.org
W: https://linuxtv.org
F: drivers/net/ethernet/ti/tlan.*
TM6000 VIDEO4LINUX DRIVER
-M: Mauro Carvalho Chehab <mchehab@s-opensource.com>
M: Mauro Carvalho Chehab <mchehab@kernel.org>
L: linux-media@vger.kernel.org
W: https://linuxtv.org
USB OVER IP DRIVER
M: Valentina Manea <valentina.manea.m@gmail.com>
-M: Shuah Khan <shuahkh@osg.samsung.com>
M: Shuah Khan <shuah@kernel.org>
L: linux-usb@vger.kernel.org
S: Maintained
F: arch/x86/entry/vdso/
XC2028/3028 TUNER DRIVER
-M: Mauro Carvalho Chehab <mchehab@s-opensource.com>
M: Mauro Carvalho Chehab <mchehab@kernel.org>
L: linux-media@vger.kernel.org
W: https://linuxtv.org
VERSION = 4
PATCHLEVEL = 17
SUBLEVEL = 0
-EXTRAVERSION = -rc3
-NAME = Fearless Coyote
+EXTRAVERSION = -rc6
+NAME = Merciless Moray
# *DOCUMENTATION*
# To see a list of typical targets execute "make help"
config GCC_PLUGIN_STRUCTLEAK
bool "Force initialization of variables containing userspace addresses"
depends on GCC_PLUGINS
+ # Currently STRUCTLEAK inserts initialization out of live scope of
+ # variables from KASAN point of view. This leads to KASAN false
+ # positive reports. Prohibit this combination for now.
+ depends on !KASAN_EXTRA
help
This plugin zero-initializes any structures containing a
__user attribute. This can prevent some classes of information
config ALPHA_JENSEN
bool "Jensen"
depends on BROKEN
+ select DMA_DIRECT_OPS
help
DEC PC 150 AXP (aka Jensen): This is a very old Digital system - one
of the first-generation Alpha systems. A number of these systems
#ifndef _ALPHA_DMA_MAPPING_H
#define _ALPHA_DMA_MAPPING_H
-extern const struct dma_map_ops *dma_ops;
+extern const struct dma_map_ops alpha_pci_ops;
static inline const struct dma_map_ops *get_arch_dma_ops(struct bus_type *bus)
{
- return dma_ops;
+#ifdef CONFIG_ALPHA_JENSEN
+ return &dma_direct_ops;
+#else
+ return &alpha_pci_ops;
+#endif
}
#endif /* _ALPHA_DMA_MAPPING_H */
void iowrite8(u8 b, void __iomem *addr)
{
- IO_CONCAT(__IO_PREFIX,iowrite8)(b, addr);
mb();
+ IO_CONCAT(__IO_PREFIX,iowrite8)(b, addr);
}
void iowrite16(u16 b, void __iomem *addr)
{
- IO_CONCAT(__IO_PREFIX,iowrite16)(b, addr);
mb();
+ IO_CONCAT(__IO_PREFIX,iowrite16)(b, addr);
}
void iowrite32(u32 b, void __iomem *addr)
{
- IO_CONCAT(__IO_PREFIX,iowrite32)(b, addr);
mb();
+ IO_CONCAT(__IO_PREFIX,iowrite32)(b, addr);
}
EXPORT_SYMBOL(ioread8);
void writeb(u8 b, volatile void __iomem *addr)
{
- __raw_writeb(b, addr);
mb();
+ __raw_writeb(b, addr);
}
void writew(u16 b, volatile void __iomem *addr)
{
- __raw_writew(b, addr);
mb();
+ __raw_writew(b, addr);
}
void writel(u32 b, volatile void __iomem *addr)
{
- __raw_writel(b, addr);
mb();
+ __raw_writel(b, addr);
}
void writeq(u64 b, volatile void __iomem *addr)
{
- __raw_writeq(b, addr);
mb();
+ __raw_writeq(b, addr);
}
EXPORT_SYMBOL(readb);
else
return -ENODEV;
}
-
-static void *alpha_noop_alloc_coherent(struct device *dev, size_t size,
- dma_addr_t *dma_handle, gfp_t gfp,
- unsigned long attrs)
-{
- void *ret;
-
- if (!dev || *dev->dma_mask >= 0xffffffffUL)
- gfp &= ~GFP_DMA;
- ret = (void *)__get_free_pages(gfp, get_order(size));
- if (ret) {
- memset(ret, 0, size);
- *dma_handle = virt_to_phys(ret);
- }
- return ret;
-}
-
-static int alpha_noop_supported(struct device *dev, u64 mask)
-{
- return mask < 0x00ffffffUL ? 0 : 1;
-}
-
-const struct dma_map_ops alpha_noop_ops = {
- .alloc = alpha_noop_alloc_coherent,
- .free = dma_noop_free_coherent,
- .map_page = dma_noop_map_page,
- .map_sg = dma_noop_map_sg,
- .mapping_error = dma_noop_mapping_error,
- .dma_supported = alpha_noop_supported,
-};
-
-const struct dma_map_ops *dma_ops = &alpha_noop_ops;
-EXPORT_SYMBOL(dma_ops);
.mapping_error = alpha_pci_mapping_error,
.dma_supported = alpha_pci_supported,
};
-
-const struct dma_map_ops *dma_ops = &alpha_pci_ops;
-EXPORT_SYMBOL(dma_ops);
+EXPORT_SYMBOL(alpha_pci_ops);
asflags-y := -DZIMAGE
# Supply kernel BSS size to the decompressor via a linker symbol.
-KBSS_SZ = $(shell $(CROSS_COMPILE)nm $(obj)/../../../../vmlinux | \
- perl -e 'while (<>) { \
- $$bss_start=hex($$1) if /^([[:xdigit:]]+) B __bss_start$$/; \
- $$bss_end=hex($$1) if /^([[:xdigit:]]+) B __bss_stop$$/; \
- }; printf "%d\n", $$bss_end - $$bss_start;')
+KBSS_SZ = $(shell echo $$(($$($(CROSS_COMPILE)nm $(obj)/../../../../vmlinux | \
+ sed -n -e 's/^\([^ ]*\) [AB] __bss_start$$/-0x\1/p' \
+ -e 's/^\([^ ]*\) [AB] __bss_stop$$/+0x\1/p') )) )
LDFLAGS_vmlinux = --defsym _kernel_bss_size=$(KBSS_SZ)
# Supply ZRELADDR to the decompressor via a linker symbol.
ifneq ($(CONFIG_AUTO_ZRELADDR),y)
#if defined(CONFIG_DEBUG_ICEDCC)
#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7)
- .macro loadsp, rb, tmp
+ .macro loadsp, rb, tmp1, tmp2
.endm
.macro writeb, ch, rb
mcr p14, 0, \ch, c0, c5, 0
.endm
#elif defined(CONFIG_CPU_XSCALE)
- .macro loadsp, rb, tmp
+ .macro loadsp, rb, tmp1, tmp2
.endm
.macro writeb, ch, rb
mcr p14, 0, \ch, c8, c0, 0
.endm
#else
- .macro loadsp, rb, tmp
+ .macro loadsp, rb, tmp1, tmp2
.endm
.macro writeb, ch, rb
mcr p14, 0, \ch, c1, c0, 0
.endm
#if defined(CONFIG_ARCH_SA1100)
- .macro loadsp, rb, tmp
+ .macro loadsp, rb, tmp1, tmp2
mov \rb, #0x80000000 @ physical base address
#ifdef CONFIG_DEBUG_LL_SER3
add \rb, \rb, #0x00050000 @ Ser3
#endif
.endm
#else
- .macro loadsp, rb, tmp
- addruart \rb, \tmp
+ .macro loadsp, rb, tmp1, tmp2
+ addruart \rb, \tmp1, \tmp2
.endm
#endif
#endif
bl decompress_kernel
bl cache_clean_flush
bl cache_off
- mov r1, r7 @ restore architecture number
- mov r2, r8 @ restore atags pointer
#ifdef CONFIG_ARM_VIRT_EXT
mrs r0, spsr @ Get saved CPU boot mode
b 1b
@ puts corrupts {r0, r1, r2, r3}
-puts: loadsp r3, r1
+puts: loadsp r3, r2, r1
1: ldrb r2, [r0], #1
teq r2, #0
moveq pc, lr
@ putc corrupts {r0, r1, r2, r3}
putc:
mov r2, r0
+ loadsp r3, r1, r0
mov r0, #0
- loadsp r3, r1
b 2b
@ memdump corrupts {r0, r1, r2, r3, r10, r11, r12, lr}
__enter_kernel:
mov r0, #0 @ must be 0
+ mov r1, r7 @ restore architecture number
+ mov r2, r8 @ restore atags pointer
ARM( mov pc, r4 ) @ call kernel
M_CLASS( add r4, r4, #1 ) @ enter in Thumb mode for M class
THUMB( bx r4 ) @ entry point is always ARM for A/R classes
timer@20200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0x20200 0x100>;
- interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
clocks = <&periph_clk>;
};
stdout-path = "serial2:115200n8";
};
- memory {
- device_type = "memory";
+ memory@c0000000 {
+ /* 128 MB DDR2 SDRAM @ 0xc0000000 */
reg = <0xc0000000 0x08000000>;
};
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
-#include "skeleton.dtsi"
#include <dt-bindings/interrupt-controller/irq.h>
/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ chosen { };
+ aliases { };
+
+ memory@c0000000 {
+ device_type = "memory";
+ reg = <0xc0000000 0x0>;
+ };
+
arm {
#address-cells = <1>;
#size-cells = <1>;
pmx_core: pinmux@14120 {
compatible = "pinctrl-single";
reg = <0x14120 0x50>;
- #address-cells = <1>;
- #size-cells = <0>;
#pinctrl-cells = <2>;
pinctrl-single,bit-per-mux;
pinctrl-single,register-width = <32>;
/ {
model = "DM8148 EVM";
- compatible = "ti,dm8148-evm", "ti,dm8148";
+ compatible = "ti,dm8148-evm", "ti,dm8148", "ti,dm814";
memory@80000000 {
device_type = "memory";
/ {
model = "HP t410 Smart Zero Client";
- compatible = "hp,t410", "ti,dm8148";
+ compatible = "hp,t410", "ti,dm8148", "ti,dm814";
memory@80000000 {
device_type = "memory";
/ {
model = "DM8168 EVM";
- compatible = "ti,dm8168-evm", "ti,dm8168";
+ compatible = "ti,dm8168-evm", "ti,dm8168", "ti,dm816";
memory@80000000 {
device_type = "memory";
/ {
model = "DRA62x J5 Eco EVM";
- compatible = "ti,dra62x-j5eco-evm", "ti,dra62x", "ti,dm8148";
+ compatible = "ti,dra62x-j5eco-evm", "ti,dra62x", "ti,dm8148", "ti,dm814";
memory@80000000 {
device_type = "memory";
};
can1: can@53fe4000 {
- compatible = "fsl,imx35-flexcan";
+ compatible = "fsl,imx35-flexcan", "fsl,imx25-flexcan";
reg = <0x53fe4000 0x1000>;
clocks = <&clks 33>, <&clks 33>;
clock-names = "ipg", "per";
};
can2: can@53fe8000 {
- compatible = "fsl,imx35-flexcan";
+ compatible = "fsl,imx35-flexcan", "fsl,imx25-flexcan";
reg = <0x53fe8000 0x1000>;
clocks = <&clks 34>, <&clks 34>;
clock-names = "ipg", "per";
};
touchscreen@20 {
- compatible = "syna,rmi4_i2c";
+ compatible = "syna,rmi4-i2c";
reg = <0x20>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ts>;
rmi4-f11@11 {
reg = <0x11>;
- touch-inverted-y;
- touch-swapped-x-y;
+ touchscreen-inverted-y;
+ touchscreen-swapped-x-y;
syna,sensor-type = <1>;
};
};
};
can1: can@53fc8000 {
- compatible = "fsl,imx53-flexcan";
+ compatible = "fsl,imx53-flexcan", "fsl,imx25-flexcan";
reg = <0x53fc8000 0x4000>;
interrupts = <82>;
clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>,
};
can2: can@53fcc000 {
- compatible = "fsl,imx53-flexcan";
+ compatible = "fsl,imx53-flexcan", "fsl,imx25-flexcan";
reg = <0x53fcc000 0x4000>;
interrupts = <83>;
clocks = <&clks IMX5_CLK_CAN2_IPG_GATE>,
crypto: caam@30900000 {
compatible = "fsl,sec-v4.0";
+ fsl,sec-era = <8>;
#address-cells = <1>;
#size-cells = <1>;
reg = <0x30900000 0x40000>;
gpio = <&gpio1 3 0>; /* gpio_3 */
startup-delay-us = <70000>;
enable-active-high;
- vin-supply = <&vmmc2>;
+ vin-supply = <&vaux3>;
};
/* HS USB Host PHY on PORT 1 */
twl_audio: audio {
compatible = "ti,twl4030-audio";
codec {
+ ti,hs_extmute_gpio = <&gpio2 25 GPIO_ACTIVE_HIGH>;
};
};
};
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */
OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0) /* i2c1_sda.i2c1_sda */
+ OMAP3_CORE1_IOPAD(0x20ba, PIN_OUTPUT | MUX_MODE4) /* gpmc_ncs6.gpio_57 */
>;
};
};
};
wl127x_gpio: pinmux_wl127x_gpio_pin {
pinctrl-single,pins = <
- OMAP3_WKUP_IOPAD(0x2a0c, PIN_INPUT | MUX_MODE4) /* sys_boot0.gpio_2 */
+ OMAP3_WKUP_IOPAD(0x2a0a, PIN_INPUT | MUX_MODE4) /* sys_boot0.gpio_2 */
OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4) /* sys_boot1.gpio_3 */
>;
};
#include "twl4030.dtsi"
#include "twl4030_omap3.dtsi"
+&vaux3 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+};
+
&twl {
twl_power: power {
compatible = "ti,twl4030-power-idle-osc-off", "ti,twl4030-power-idle";
port@0 {
reg = <0>;
adv7511_in: endpoint {
- remote-endpoint = <&du_out_lvds0>;
+ remote-endpoint = <&lvds0_out>;
};
};
status = "okay";
clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 722>,
- <&cpg CPG_MOD 726>, <&cpg CPG_MOD 725>,
<&x13_clk>, <&x2_clk>;
- clock-names = "du.0", "du.1", "du.2", "lvds.0", "lvds.1",
- "dclkin.0", "dclkin.1";
+ clock-names = "du.0", "du.1", "du.2", "dclkin.0", "dclkin.1";
ports {
port@0 {
remote-endpoint = <&adv7123_in>;
};
};
+ };
+};
+
+&lvds0 {
+ status = "okay";
+
+ ports {
port@1 {
endpoint {
remote-endpoint = <&adv7511_in>;
};
};
- port@2 {
+ };
+};
+
+&lvds1 {
+ status = "okay";
+
+ ports {
+ port@1 {
lvds_connector: endpoint {
};
};
du: display@feb00000 {
compatible = "renesas,du-r8a7790";
- reg = <0 0xfeb00000 0 0x70000>,
- <0 0xfeb90000 0 0x1c>,
- <0 0xfeb94000 0 0x1c>;
- reg-names = "du", "lvds.0", "lvds.1";
+ reg = <0 0xfeb00000 0 0x70000>;
interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
- <&cpg CPG_MOD 722>, <&cpg CPG_MOD 726>,
- <&cpg CPG_MOD 725>;
- clock-names = "du.0", "du.1", "du.2", "lvds.0",
- "lvds.1";
+ <&cpg CPG_MOD 722>;
+ clock-names = "du.0", "du.1", "du.2";
status = "disabled";
ports {
port@1 {
reg = <1>;
du_out_lvds0: endpoint {
+ remote-endpoint = <&lvds0_in>;
};
};
port@2 {
reg = <2>;
du_out_lvds1: endpoint {
+ remote-endpoint = <&lvds1_in>;
+ };
+ };
+ };
+ };
+
+ lvds0: lvds@feb90000 {
+ compatible = "renesas,r8a7790-lvds";
+ reg = <0 0xfeb90000 0 0x1c>;
+ clocks = <&cpg CPG_MOD 726>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 726>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ lvds0_in: endpoint {
+ remote-endpoint = <&du_out_lvds0>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ lvds0_out: endpoint {
+ };
+ };
+ };
+ };
+
+ lvds1: lvds@feb94000 {
+ compatible = "renesas,r8a7790-lvds";
+ reg = <0 0xfeb94000 0 0x1c>;
+ clocks = <&cpg CPG_MOD 725>;
+ power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
+ resets = <&cpg 725>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ lvds1_in: endpoint {
+ remote-endpoint = <&du_out_lvds1>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ lvds1_out: endpoint {
};
};
};
pinctrl-names = "default";
status = "okay";
- clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 726>,
+ clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
<&x13_clk>, <&x2_clk>;
- clock-names = "du.0", "du.1", "lvds.0",
- "dclkin.0", "dclkin.1";
+ clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
ports {
port@0 {
remote-endpoint = <&adv7511_in>;
};
};
+ };
+};
+
+&lvds0 {
+ status = "okay";
+
+ ports {
port@1 {
lvds_connector: endpoint {
};
pinctrl-names = "default";
status = "okay";
- clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 726>,
+ clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
<&x3_clk>, <&x16_clk>;
- clock-names = "du.0", "du.1", "lvds.0",
- "dclkin.0", "dclkin.1";
+ clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
ports {
port@0 {
};
};
+&lvds0 {
+ status = "okay";
+
+ ports {
+ port@1 {
+ lvds_connector: endpoint {
+ };
+ };
+ };
+};
+
&rcar_sound {
pinctrl-0 = <&ssi_pins &audio_clk_pins>;
pinctrl-names = "default";
du: display@feb00000 {
compatible = "renesas,du-r8a7791";
- reg = <0 0xfeb00000 0 0x40000>,
- <0 0xfeb90000 0 0x1c>;
- reg-names = "du", "lvds.0";
+ reg = <0 0xfeb00000 0 0x40000>;
interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 724>,
- <&cpg CPG_MOD 723>,
- <&cpg CPG_MOD 726>;
- clock-names = "du.0", "du.1", "lvds.0";
+ <&cpg CPG_MOD 723>;
+ clock-names = "du.0", "du.1";
status = "disabled";
ports {
port@1 {
reg = <1>;
du_out_lvds0: endpoint {
+ remote-endpoint = <&lvds0_in>;
+ };
+ };
+ };
+ };
+
+ lvds0: lvds@feb90000 {
+ compatible = "renesas,r8a7791-lvds";
+ reg = <0 0xfeb90000 0 0x1c>;
+ clocks = <&cpg CPG_MOD 726>;
+ power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+ resets = <&cpg 726>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ lvds0_in: endpoint {
+ remote-endpoint = <&du_out_lvds0>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ lvds0_out: endpoint {
};
};
};
pinctrl-names = "default";
status = "okay";
- clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 726>,
+ clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
<&x13_clk>, <&x2_clk>;
- clock-names = "du.0", "du.1", "lvds.0",
- "dclkin.0", "dclkin.1";
+ clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
ports {
port@0 {
remote-endpoint = <&adv7511_in>;
};
};
+ };
+};
+
+&lvds0 {
+ ports {
port@1 {
lvds_connector: endpoint {
};
du: display@feb00000 {
compatible = "renesas,du-r8a7793";
- reg = <0 0xfeb00000 0 0x40000>,
- <0 0xfeb90000 0 0x1c>;
- reg-names = "du", "lvds.0";
+ reg = <0 0xfeb00000 0 0x40000>;
interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&cpg CPG_MOD 724>,
- <&cpg CPG_MOD 723>,
- <&cpg CPG_MOD 726>;
- clock-names = "du.0", "du.1", "lvds.0";
+ <&cpg CPG_MOD 723>;
+ clock-names = "du.0", "du.1";
status = "disabled";
ports {
port@1 {
reg = <1>;
du_out_lvds0: endpoint {
+ remote-endpoint = <&lvds0_in>;
+ };
+ };
+ };
+ };
+
+ lvds0: lvds@feb90000 {
+ compatible = "renesas,r8a7793-lvds";
+ reg = <0 0xfeb90000 0 0x1c>;
+ clocks = <&cpg CPG_MOD 726>;
+ power-domains = <&sysc R8A7793_PD_ALWAYS_ON>;
+ resets = <&cpg 726>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ lvds0_in: endpoint {
+ remote-endpoint = <&du_out_lvds0>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ lvds0_out: endpoint {
};
};
};
phy_type = "ulpi";
clocks = <&tegra_car TEGRA20_CLK_USB2>,
<&tegra_car TEGRA20_CLK_PLL_U>,
- <&tegra_car TEGRA20_CLK_PLL_P_OUT4>;
+ <&tegra_car TEGRA20_CLK_CDEV2>;
clock-names = "reg", "pll_u", "ulpi-link";
resets = <&tegra_car 58>, <&tegra_car 22>;
reset-names = "usb", "utmi-pads";
#endif
.endm
+#ifdef CONFIG_KPROBES
+#define _ASM_NOKPROBE(entry) \
+ .pushsection "_kprobe_blacklist", "aw" ; \
+ .balign 4 ; \
+ .long entry; \
+ .popsection
+#else
+#define _ASM_NOKPROBE(entry)
+#endif
+
#endif /* __ASM_ASSEMBLER_H__ */
return 8;
}
+/*
+ * We are not in the kvm->srcu critical section most of the time, so we take
+ * the SRCU read lock here. Since we copy the data from the user page, we
+ * can immediately drop the lock again.
+ */
+static inline int kvm_read_guest_lock(struct kvm *kvm,
+ gpa_t gpa, void *data, unsigned long len)
+{
+ int srcu_idx = srcu_read_lock(&kvm->srcu);
+ int ret = kvm_read_guest(kvm, gpa, data, len);
+
+ srcu_read_unlock(&kvm->srcu, srcu_idx);
+
+ return ret;
+}
+
static inline void *kvm_get_hyp_vector(void)
{
return kvm_ksym_ref(__kvm_hyp_vector);
+++ /dev/null
-#ifndef __ASM_SIGINFO_H
-#define __ASM_SIGINFO_H
-
-#include <asm-generic/siginfo.h>
-
-/*
- * SIGFPE si_codes
- */
-#ifdef __KERNEL__
-#define FPE_FIXME 0 /* Broken dup of SI_USER */
-#endif /* __KERNEL__ */
-
-#endif
{
struct pt_regs regs;
- crash_setup_regs(®s, NULL);
+ crash_setup_regs(®s, get_irq_regs());
printk(KERN_DEBUG "CPU %u will stop doing anything useful since another CPU has crashed\n",
smp_processor_id());
crash_save_cpu(®s, smp_processor_id());
cpu_relax();
}
+void crash_smp_send_stop(void)
+{
+ static int cpus_stopped;
+ unsigned long msecs;
+
+ if (cpus_stopped)
+ return;
+
+ atomic_set(&waiting_for_crash_ipi, num_online_cpus() - 1);
+ smp_call_function(machine_crash_nonpanic_core, NULL, false);
+ msecs = 1000; /* Wait at most a second for the other cpus to stop */
+ while ((atomic_read(&waiting_for_crash_ipi) > 0) && msecs) {
+ mdelay(1);
+ msecs--;
+ }
+ if (atomic_read(&waiting_for_crash_ipi) > 0)
+ pr_warn("Non-crashing CPUs did not react to IPI\n");
+
+ cpus_stopped = 1;
+}
+
static void machine_kexec_mask_interrupts(void)
{
unsigned int i;
void machine_crash_shutdown(struct pt_regs *regs)
{
- unsigned long msecs;
-
local_irq_disable();
-
- atomic_set(&waiting_for_crash_ipi, num_online_cpus() - 1);
- smp_call_function(machine_crash_nonpanic_core, NULL, false);
- msecs = 1000; /* Wait at most a second for the other cpus to stop */
- while ((atomic_read(&waiting_for_crash_ipi) > 0) && msecs) {
- mdelay(1);
- msecs--;
- }
- if (atomic_read(&waiting_for_crash_ipi) > 0)
- pr_warn("Non-crashing CPUs did not react to IPI\n");
+ crash_smp_send_stop();
crash_save_cpu(regs, smp_processor_id());
machine_kexec_mask_interrupts();
#include <linux/uaccess.h>
#include <linux/hardirq.h>
#include <linux/kdebug.h>
+#include <linux/kprobes.h>
#include <linux/module.h>
#include <linux/kexec.h>
#include <linux/bug.h>
raw_spin_unlock_irqrestore(&undef_lock, flags);
}
-static int call_undef_hook(struct pt_regs *regs, unsigned int instr)
+static nokprobe_inline
+int call_undef_hook(struct pt_regs *regs, unsigned int instr)
{
struct undef_hook *hook;
unsigned long flags;
arm_notify_die("Oops - undefined instruction", regs, &info, 0, 6);
}
+NOKPROBE_SYMBOL(do_undefinstr)
/*
* Handle FIQ similarly to NMI on x86 systems.
mov r0, #0
ret lr
ENDPROC(__get_user_1)
+_ASM_NOKPROBE(__get_user_1)
ENTRY(__get_user_2)
check_uaccess r0, 2, r1, r2, __get_user_bad
mov r0, #0
ret lr
ENDPROC(__get_user_2)
+_ASM_NOKPROBE(__get_user_2)
ENTRY(__get_user_4)
check_uaccess r0, 4, r1, r2, __get_user_bad
mov r0, #0
ret lr
ENDPROC(__get_user_4)
+_ASM_NOKPROBE(__get_user_4)
ENTRY(__get_user_8)
check_uaccess r0, 8, r1, r2, __get_user_bad8
mov r0, #0
ret lr
ENDPROC(__get_user_8)
+_ASM_NOKPROBE(__get_user_8)
#ifdef __ARMEB__
ENTRY(__get_user_32t_8)
mov r0, #0
ret lr
ENDPROC(__get_user_32t_8)
+_ASM_NOKPROBE(__get_user_32t_8)
ENTRY(__get_user_64t_1)
check_uaccess r0, 1, r1, r2, __get_user_bad8
mov r0, #0
ret lr
ENDPROC(__get_user_64t_1)
+_ASM_NOKPROBE(__get_user_64t_1)
ENTRY(__get_user_64t_2)
check_uaccess r0, 2, r1, r2, __get_user_bad8
mov r0, #0
ret lr
ENDPROC(__get_user_64t_2)
+_ASM_NOKPROBE(__get_user_64t_2)
ENTRY(__get_user_64t_4)
check_uaccess r0, 4, r1, r2, __get_user_bad8
mov r0, #0
ret lr
ENDPROC(__get_user_64t_4)
+_ASM_NOKPROBE(__get_user_64t_4)
#endif
__get_user_bad8:
ret lr
ENDPROC(__get_user_bad)
ENDPROC(__get_user_bad8)
+_ASM_NOKPROBE(__get_user_bad)
+_ASM_NOKPROBE(__get_user_bad8)
.pushsection __ex_table, "a"
.long 1b, __get_user_bad
-1
};
+#define DA830_MMCSD_WP_PIN GPIO_TO_PIN(2, 1)
+#define DA830_MMCSD_CD_PIN GPIO_TO_PIN(2, 2)
+
static struct gpiod_lookup_table mmc_gpios_table = {
.dev_id = "da830-mmc.0",
.table = {
/* gpio chip 1 contains gpio range 32-63 */
- GPIO_LOOKUP("davinci_gpio.1", 2, "cd", GPIO_ACTIVE_LOW),
- GPIO_LOOKUP("davinci_gpio.1", 1, "wp", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("davinci_gpio.0", DA830_MMCSD_CD_PIN, "cd",
+ GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("davinci_gpio.0", DA830_MMCSD_WP_PIN, "wp",
+ GPIO_ACTIVE_LOW),
},
};
-1
};
+#define DA850_MMCSD_CD_PIN GPIO_TO_PIN(4, 0)
+#define DA850_MMCSD_WP_PIN GPIO_TO_PIN(4, 1)
+
static struct gpiod_lookup_table mmc_gpios_table = {
.dev_id = "da830-mmc.0",
.table = {
/* gpio chip 2 contains gpio range 64-95 */
- GPIO_LOOKUP("davinci_gpio.2", 0, "cd", GPIO_ACTIVE_LOW),
- GPIO_LOOKUP("davinci_gpio.2", 1, "wp", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("davinci_gpio.0", DA850_MMCSD_CD_PIN, "cd",
+ GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("davinci_gpio.0", DA850_MMCSD_WP_PIN, "wp",
+ GPIO_ACTIVE_LOW),
},
};
#include <linux/gpio.h>
#include <linux/gpio/machine.h>
#include <linux/clk.h>
+#include <linux/dm9000.h>
#include <linux/videodev2.h>
#include <media/i2c/tvp514x.h>
#include <linux/spi/spi.h>
},
};
+#define DM355_I2C_SDA_PIN GPIO_TO_PIN(0, 15)
+#define DM355_I2C_SCL_PIN GPIO_TO_PIN(0, 14)
+
static struct gpiod_lookup_table i2c_recovery_gpiod_table = {
- .dev_id = "i2c_davinci",
+ .dev_id = "i2c_davinci.1",
.table = {
- GPIO_LOOKUP("davinci_gpio", 15, "sda",
+ GPIO_LOOKUP("davinci_gpio.0", DM355_I2C_SDA_PIN, "sda",
GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
- GPIO_LOOKUP("davinci_gpio", 14, "scl",
+ GPIO_LOOKUP("davinci_gpio.0", DM355_I2C_SCL_PIN, "scl",
GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
},
};
},
};
+static struct dm9000_plat_data dm335evm_dm9000_platdata;
+
static struct platform_device dm355evm_dm9000 = {
.name = "dm9000",
.id = -1,
.resource = dm355evm_dm9000_rsrc,
.num_resources = ARRAY_SIZE(dm355evm_dm9000_rsrc),
+ .dev = {
+ .platform_data = &dm335evm_dm9000_platdata,
+ },
};
static struct tvp514x_platform_data tvp5146_pdata = {
git.codelabs.ch / muen / linux.git / commitdiff