Merge tag 'gemini-dts-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw...
authorOlof Johansson <olof@lixom.net>
Sun, 15 Jul 2018 05:47:22 +0000 (22:47 -0700)
committerOlof Johansson <olof@lixom.net>
Sun, 15 Jul 2018 05:47:22 +0000 (22:47 -0700)
Gemini DTS updates for v4.19:
- Add Vitesse switch chips
- Add a new DT for a reference design

* tag 'gemini-dts-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
  ARM: dts: Add devicetree for Storlink/Storm SL93512R
  ARM: dts: Add Vitesse G5e switch to the Gemini SQ201
  ARM: dts: Add WAN ethernet port to the SQ201

Signed-off-by: Olof Johansson <olof@lixom.net>
999 files changed:
Documentation/admin-guide/pm/intel_pstate.rst
Documentation/core-api/kernel-api.rst
Documentation/devicetree/bindings/arm/cpus.txt
Documentation/devicetree/bindings/arm/insignal-boards.txt [deleted file]
Documentation/devicetree/bindings/arm/rockchip.txt
Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt
Documentation/devicetree/bindings/bus/ti-sysc.txt
Documentation/devicetree/bindings/input/sprd,sc27xx-vibra.txt [new file with mode: 0644]
Documentation/devicetree/bindings/sound/mrvl,pxa-ssp.txt
Documentation/devicetree/bindings/timer/ti,davinci-timer.txt [new file with mode: 0644]
Documentation/driver-api/infrastructure.rst
Documentation/filesystems/Locking
Documentation/filesystems/cifs/AUTHORS
Documentation/filesystems/cifs/CHANGES
Documentation/filesystems/cifs/TODO
Documentation/filesystems/vfs.txt
Documentation/kbuild/kconfig-language.txt
Documentation/networking/e100.rst
Documentation/networking/e1000.rst
Documentation/networking/strparser.txt
Documentation/trace/histogram.txt
Documentation/usb/gadget_configfs.txt
Documentation/virtual/kvm/api.txt
MAINTAINERS
Makefile
arch/alpha/Kconfig
arch/alpha/lib/Makefile
arch/alpha/lib/dec_and_lock.c [deleted file]
arch/arm/Kconfig
arch/arm/boot/dts/Makefile
arch/arm/boot/dts/am335x-baltos.dtsi
arch/arm/boot/dts/am335x-evm.dts
arch/arm/boot/dts/am335x-evmsk.dts
arch/arm/boot/dts/am335x-sl50.dts
arch/arm/boot/dts/am33xx.dtsi
arch/arm/boot/dts/am3517-evm.dts
arch/arm/boot/dts/am3517-som.dtsi
arch/arm/boot/dts/am437x-gp-evm.dts
arch/arm/boot/dts/am571x-idk.dts
arch/arm/boot/dts/am572x-idk-common.dtsi
arch/arm/boot/dts/am57xx-idk-common.dtsi
arch/arm/boot/dts/armada-385-synology-ds116.dts
arch/arm/boot/dts/armada-388-clearfog-base.dts
arch/arm/boot/dts/armada-388-clearfog-pro.dts
arch/arm/boot/dts/armada-388-clearfog.dts
arch/arm/boot/dts/armada-388-clearfog.dtsi
arch/arm/boot/dts/armada-388-helios4.dts [new file with mode: 0644]
arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
arch/arm/boot/dts/bcm-cygnus.dtsi
arch/arm/boot/dts/bcm-hr2.dtsi
arch/arm/boot/dts/bcm-nsp.dtsi
arch/arm/boot/dts/bcm2835-rpi-cm1-io1.dts [new file with mode: 0644]
arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi [new file with mode: 0644]
arch/arm/boot/dts/bcm2837.dtsi
arch/arm/boot/dts/bcm283x.dtsi
arch/arm/boot/dts/bcm4708-asus-rt-ac56u.dts
arch/arm/boot/dts/bcm4708-asus-rt-ac68u.dts
arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
arch/arm/boot/dts/bcm4708-linksys-ea6300-v1.dts
arch/arm/boot/dts/bcm4708-luxul-xap-1510.dts
arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
arch/arm/boot/dts/bcm4708-netgear-r6250.dts
arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
arch/arm/boot/dts/bcm47081-luxul-xap-1410.dts
arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
arch/arm/boot/dts/bcm47081-tplink-archer-c5-v2.dts
arch/arm/boot/dts/bcm4709-asus-rt-ac87u.dts
arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts
arch/arm/boot/dts/bcm4709-linksys-ea9200.dts
arch/arm/boot/dts/bcm4709-netgear-r7000.dts
arch/arm/boot/dts/bcm4709-netgear-r8000.dts
arch/arm/boot/dts/bcm4709-tplink-archer-c9-v1.dts
arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts
arch/arm/boot/dts/bcm47094-linksys-panamera.dts
arch/arm/boot/dts/bcm47094-luxul-abr-4500.dts
arch/arm/boot/dts/bcm47094-luxul-xbr-4500.dts
arch/arm/boot/dts/bcm47094-luxul-xwr-3100.dts
arch/arm/boot/dts/bcm47094-netgear-r8500.dts
arch/arm/boot/dts/bcm47094.dtsi
arch/arm/boot/dts/bcm5301x.dtsi
arch/arm/boot/dts/bcm53573.dtsi
arch/arm/boot/dts/bcm94708.dts
arch/arm/boot/dts/bcm94709.dts
arch/arm/boot/dts/bcm953012er.dts
arch/arm/boot/dts/bcm953012hr.dts
arch/arm/boot/dts/bcm953012k.dts
arch/arm/boot/dts/da850-enbw-cmc.dts
arch/arm/boot/dts/da850-evm.dts
arch/arm/boot/dts/da850-lcdk.dts
arch/arm/boot/dts/da850-lego-ev3.dts
arch/arm/boot/dts/da850.dtsi
arch/arm/boot/dts/dra7-evm-common.dtsi
arch/arm/boot/dts/dra7-evm.dts
arch/arm/boot/dts/dra7.dtsi
arch/arm/boot/dts/dra71-evm.dts
arch/arm/boot/dts/dra72-evm-common.dtsi
arch/arm/boot/dts/dra74x.dtsi
arch/arm/boot/dts/dra76-evm.dts
arch/arm/boot/dts/dra76x.dtsi
arch/arm/boot/dts/exynos3250.dtsi
arch/arm/boot/dts/exynos4.dtsi
arch/arm/boot/dts/exynos4210.dtsi
arch/arm/boot/dts/exynos4412-tmu-sensor-conf.dtsi [deleted file]
arch/arm/boot/dts/exynos4412.dtsi
arch/arm/boot/dts/exynos5250.dtsi
arch/arm/boot/dts/exynos5410.dtsi
arch/arm/boot/dts/exynos5420-cpus.dtsi
arch/arm/boot/dts/exynos5420-tmu-sensor-conf.dtsi [deleted file]
arch/arm/boot/dts/exynos5420.dtsi
arch/arm/boot/dts/exynos5422-cpus.dtsi
arch/arm/boot/dts/highbank.dts
arch/arm/boot/dts/imx6q.dtsi
arch/arm/boot/dts/imx6sx.dtsi
arch/arm/boot/dts/keystone-k2e-netcp.dtsi
arch/arm/boot/dts/keystone-k2g-evm.dts
arch/arm/boot/dts/keystone-k2g-ice.dts
arch/arm/boot/dts/keystone-k2g-netcp.dtsi [new file with mode: 0644]
arch/arm/boot/dts/keystone-k2g.dtsi
arch/arm/boot/dts/keystone-k2hk-netcp.dtsi
arch/arm/boot/dts/keystone-k2l-netcp.dtsi
arch/arm/boot/dts/logicpd-som-lv.dtsi
arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts
arch/arm/boot/dts/omap3-cm-t3517.dts
arch/arm/boot/dts/omap3-cm-t3730.dts
arch/arm/boot/dts/omap3-evm-common.dtsi
arch/arm/boot/dts/omap3-igep0020-rev-f.dts
arch/arm/boot/dts/omap3-igep0030-rev-g.dts
arch/arm/boot/dts/omap3-zoom3.dts
arch/arm/boot/dts/omap4-droid4-xt894.dts
arch/arm/boot/dts/omap4-duovero-parlor.dts
arch/arm/boot/dts/omap4-duovero.dtsi
arch/arm/boot/dts/omap4-panda-common.dtsi
arch/arm/boot/dts/omap4-panda-es.dts
arch/arm/boot/dts/omap4-sdp.dts
arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi
arch/arm/boot/dts/omap5-board-common.dtsi
arch/arm/boot/dts/omap5.dtsi
arch/arm/boot/dts/pxa2xx.dtsi
arch/arm/boot/dts/pxa3xx.dtsi
arch/arm/boot/dts/rk3036-evb.dts
arch/arm/boot/dts/rk3036-kylin.dts
arch/arm/boot/dts/rk3036.dtsi
arch/arm/boot/dts/rk3066a-bqcurie2.dts
arch/arm/boot/dts/rk3066a-marsboard.dts
arch/arm/boot/dts/rk3066a-mk808.dts
arch/arm/boot/dts/rk3066a-rayeager.dts
arch/arm/boot/dts/rk3066a.dtsi
arch/arm/boot/dts/rk3188-px3-evb.dts
arch/arm/boot/dts/rk3188-radxarock.dts
arch/arm/boot/dts/rk3188.dtsi
arch/arm/boot/dts/rk3228-evb.dts
arch/arm/boot/dts/rk3229-evb.dts
arch/arm/boot/dts/rk3229.dtsi
arch/arm/boot/dts/rk322x.dtsi
arch/arm/boot/dts/rk3288-evb-act8846.dts
arch/arm/boot/dts/rk3288-evb-rk808.dts
arch/arm/boot/dts/rk3288-evb.dtsi
arch/arm/boot/dts/rk3288-fennec.dts
arch/arm/boot/dts/rk3288-firefly-beta.dts
arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi
arch/arm/boot/dts/rk3288-firefly-reload.dts
arch/arm/boot/dts/rk3288-firefly.dts
arch/arm/boot/dts/rk3288-firefly.dtsi
arch/arm/boot/dts/rk3288-miqi.dts
arch/arm/boot/dts/rk3288-phycore-rdk.dts
arch/arm/boot/dts/rk3288-phycore-som.dtsi
arch/arm/boot/dts/rk3288-popmetal.dts
arch/arm/boot/dts/rk3288-r89.dts
arch/arm/boot/dts/rk3288-rock2-som.dtsi
arch/arm/boot/dts/rk3288-rock2-square.dts
arch/arm/boot/dts/rk3288-tinker.dts
arch/arm/boot/dts/rk3288-veyron-analog-audio.dtsi
arch/arm/boot/dts/rk3288-veyron-brain.dts
arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi
arch/arm/boot/dts/rk3288-veyron-jaq.dts
arch/arm/boot/dts/rk3288-veyron-jerry.dts
arch/arm/boot/dts/rk3288-veyron-mickey.dts
arch/arm/boot/dts/rk3288-veyron-minnie.dts
arch/arm/boot/dts/rk3288-veyron-pinky.dts
arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi
arch/arm/boot/dts/rk3288-veyron-speedy.dts
arch/arm/boot/dts/rk3288-veyron.dtsi
arch/arm/boot/dts/rk3288-vyasa.dts
arch/arm/boot/dts/rk3288.dtsi
arch/arm/boot/dts/rk3xxx.dtsi
arch/arm/boot/dts/rv1108-evb.dts
arch/arm/boot/dts/rv1108.dtsi
arch/arm/boot/dts/s5pv210-aries.dtsi [new file with mode: 0644]
arch/arm/boot/dts/s5pv210-fascinate4g.dts [new file with mode: 0644]
arch/arm/boot/dts/s5pv210-galaxys.dts [new file with mode: 0644]
arch/arm/boot/dts/s5pv210-pinctrl.dtsi
arch/arm/boot/dts/socfpga.dtsi
arch/arm/boot/dts/socfpga_arria10.dtsi
arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
arch/arm/boot/dts/stm32f429.dtsi
arch/arm/boot/dts/stm32f746.dtsi
arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
arch/arm/boot/dts/stm32mp157c-ed1.dts
arch/arm/boot/dts/stm32mp157c-ev1.dts
arch/arm/boot/dts/stm32mp157c.dtsi
arch/arm/boot/dts/tegra114-dalmore.dts
arch/arm/boot/dts/tegra114-roth.dts
arch/arm/boot/dts/tegra114-tn7.dts
arch/arm/boot/dts/tegra114.dtsi
arch/arm/boot/dts/tegra124-apalis-v1.2.dtsi
arch/arm/boot/dts/tegra124-apalis.dtsi
arch/arm/boot/dts/tegra124-jetson-tk1.dts
arch/arm/boot/dts/tegra124-nyan.dtsi
arch/arm/boot/dts/tegra124-venice2.dts
arch/arm/boot/dts/tegra124.dtsi
arch/arm/boot/dts/tegra20-colibri-512.dtsi [deleted file]
arch/arm/boot/dts/tegra20-colibri-iris.dts [new file with mode: 0644]
arch/arm/boot/dts/tegra20-colibri.dtsi [new file with mode: 0644]
arch/arm/boot/dts/tegra20-harmony.dts
arch/arm/boot/dts/tegra20-iris-512.dts [deleted file]
arch/arm/boot/dts/tegra20-paz00.dts
arch/arm/boot/dts/tegra20-seaboard.dts
arch/arm/boot/dts/tegra20-tamonten.dtsi
arch/arm/boot/dts/tegra20-trimslice.dts
arch/arm/boot/dts/tegra20-ventana.dts
arch/arm/boot/dts/tegra20.dtsi
arch/arm/boot/dts/tegra30-apalis.dtsi
arch/arm/boot/dts/tegra30-beaver.dts
arch/arm/boot/dts/tegra30-cardhu.dtsi
arch/arm/boot/dts/tegra30-colibri.dtsi
arch/arm/boot/dts/tegra30.dtsi
arch/arm/common/Makefile
arch/arm/configs/multi_v7_defconfig
arch/arm/kernel/signal.c
arch/arm/mach-bcm/Kconfig
arch/arm/mach-davinci/board-da850-evm.c
arch/arm/mach-socfpga/Kconfig
arch/arm/xen/enlighten.c
arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dts
arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
arch/arm64/boot/dts/amlogic/meson-axg.dtsi
arch/arm64/boot/dts/amlogic/meson-gx.dtsi
arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-libretech-cc.dts
arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi
arch/arm64/boot/dts/broadcom/stingray/Makefile
arch/arm64/boot/dts/broadcom/stingray/bcm958742-base.dtsi
arch/arm64/boot/dts/broadcom/stingray/bcm958742k.dts
arch/arm64/boot/dts/broadcom/stingray/bcm958742t.dts
arch/arm64/boot/dts/broadcom/stingray/bcm958802a802x.dts [new file with mode: 0644]
arch/arm64/boot/dts/broadcom/stingray/stingray-board-base.dtsi [new file with mode: 0644]
arch/arm64/boot/dts/broadcom/stingray/stingray-clock.dtsi
arch/arm64/boot/dts/broadcom/stingray/stingray-pcie.dtsi [new file with mode: 0644]
arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
arch/arm64/boot/dts/exynos/exynos5433-tmu-g3d-sensor-conf.dtsi [deleted file]
arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi [deleted file]
arch/arm64/boot/dts/exynos/exynos5433.dtsi
arch/arm64/boot/dts/exynos/exynos7-tmu-sensor-conf.dtsi [deleted file]
arch/arm64/boot/dts/exynos/exynos7.dtsi
arch/arm64/boot/dts/hisilicon/hi3660-hikey960.dts
arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
arch/arm64/boot/dts/marvell/armada-37xx.dtsi
arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
arch/arm64/boot/dts/marvell/armada-cp110.dtsi
arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
arch/arm64/boot/dts/nvidia/tegra194.dtsi
arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
arch/arm64/boot/dts/qcom/msm8916.dtsi
arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb-kf.dts
arch/arm64/boot/dts/renesas/r8a7795-es1-h3ulcb.dts
arch/arm64/boot/dts/renesas/r8a7795-es1-salvator-x.dts
arch/arm64/boot/dts/renesas/r8a7795-es1.dtsi
arch/arm64/boot/dts/renesas/r8a7795-h3ulcb-kf.dts
arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts
arch/arm64/boot/dts/renesas/r8a7795.dtsi
arch/arm64/boot/dts/renesas/r8a7796-m3ulcb-kf.dts
arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts
arch/arm64/boot/dts/renesas/r8a7796-salvator-xs.dts
arch/arm64/boot/dts/renesas/r8a7796.dtsi
arch/arm64/boot/dts/renesas/r8a77965.dtsi
arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
arch/arm64/boot/dts/renesas/r8a77970-v3msk.dts
arch/arm64/boot/dts/renesas/r8a77970.dtsi
arch/arm64/boot/dts/renesas/r8a77980-condor.dts
arch/arm64/boot/dts/renesas/r8a77980-v3hsk.dts
arch/arm64/boot/dts/renesas/r8a77980.dtsi
arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts
arch/arm64/boot/dts/renesas/r8a77990.dtsi
arch/arm64/boot/dts/renesas/r8a77995-draak.dts
arch/arm64/boot/dts/renesas/r8a77995.dtsi
arch/arm64/boot/dts/renesas/salvator-common.dtsi
arch/arm64/boot/dts/renesas/salvator-x.dtsi
arch/arm64/boot/dts/renesas/salvator-xs.dtsi
arch/arm64/boot/dts/renesas/ulcb-kf.dtsi
arch/arm64/boot/dts/renesas/ulcb.dtsi
arch/arm64/boot/dts/rockchip/Makefile
arch/arm64/boot/dts/rockchip/rk3328-evb.dts
arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
arch/arm64/boot/dts/rockchip/rk3328.dtsi
arch/arm64/boot/dts/rockchip/rk3368-evb-act8846.dts
arch/arm64/boot/dts/rockchip/rk3368-evb.dtsi
arch/arm64/boot/dts/rockchip/rk3368-geekbox.dts
arch/arm64/boot/dts/rockchip/rk3368-orion-r68-meta.dts
arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts
arch/arm64/boot/dts/rockchip/rk3368-r88.dts
arch/arm64/boot/dts/rockchip/rk3368.dtsi
arch/arm64/boot/dts/rockchip/rk3399-evb.dts
arch/arm64/boot/dts/rockchip/rk3399-firefly.dts
arch/arm64/boot/dts/rockchip/rk3399-gru-bob.dts [new file with mode: 0644]
arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi [new file with mode: 0644]
arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi
arch/arm64/boot/dts/rockchip/rk3399-op1-opp.dtsi
arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi
arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts
arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
arch/arm64/boot/dts/rockchip/rk3399.dtsi
arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts
arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts
arch/arm64/configs/defconfig
arch/arm64/crypto/aes-glue.c
arch/arm64/include/asm/alternative.h
arch/arm64/include/asm/kvm_host.h
arch/arm64/include/asm/pgtable.h
arch/arm64/include/asm/sysreg.h
arch/arm64/kernel/alternative.c
arch/arm64/kernel/cpufeature.c
arch/arm64/kernel/module.c
arch/arm64/kernel/smp.c
arch/arm64/kvm/fpsimd.c
arch/arm64/mm/dma-mapping.c
arch/arm64/mm/proc.S
arch/microblaze/Kconfig.debug
arch/microblaze/include/asm/setup.h
arch/microblaze/include/asm/unistd.h
arch/microblaze/include/uapi/asm/unistd.h
arch/microblaze/kernel/Makefile
arch/microblaze/kernel/heartbeat.c [deleted file]
arch/microblaze/kernel/platform.c [deleted file]
arch/microblaze/kernel/reset.c
arch/microblaze/kernel/syscall_table.S
arch/microblaze/kernel/timer.c
arch/mips/Kconfig
arch/mips/ath79/mach-pb44.c
arch/mips/bcm47xx/setup.c
arch/mips/include/asm/io.h
arch/mips/include/asm/mipsregs.h
arch/mips/include/uapi/asm/unistd.h
arch/mips/kernel/entry.S
arch/mips/kernel/mcount.S
arch/mips/kernel/scall32-o32.S
arch/mips/kernel/scall64-64.S
arch/mips/kernel/scall64-n32.S
arch/mips/kernel/scall64-o32.S
arch/mips/kernel/signal.c
arch/parisc/Kconfig
arch/parisc/Makefile
arch/parisc/include/asm/signal.h
arch/parisc/include/uapi/asm/unistd.h
arch/parisc/kernel/drivers.c
arch/parisc/kernel/syscall_table.S
arch/parisc/kernel/unwind.c
arch/powerpc/Makefile
arch/powerpc/include/asm/book3s/32/pgalloc.h
arch/powerpc/include/asm/book3s/64/pgtable-4k.h
arch/powerpc/include/asm/book3s/64/pgtable-64k.h
arch/powerpc/include/asm/book3s/64/pgtable.h
arch/powerpc/include/asm/nmi.h
arch/powerpc/include/asm/nohash/32/pgalloc.h
arch/powerpc/include/asm/nohash/64/pgalloc.h
arch/powerpc/include/asm/systbl.h
arch/powerpc/include/asm/unistd.h
arch/powerpc/include/uapi/asm/unistd.h
arch/powerpc/kernel/dt_cpu_ftrs.c
arch/powerpc/kernel/pci_32.c
arch/powerpc/kernel/pci_64.c
arch/powerpc/kernel/rtas.c
arch/powerpc/kernel/setup-common.c
arch/powerpc/kernel/setup_64.c
arch/powerpc/kernel/signal.c
arch/powerpc/kernel/signal_32.c
arch/powerpc/kernel/signal_64.c
arch/powerpc/kernel/smp.c
arch/powerpc/kernel/stacktrace.c
arch/powerpc/kernel/syscalls.c
arch/powerpc/mm/hugetlbpage.c
arch/powerpc/mm/pgtable-book3s64.c
arch/powerpc/mm/subpage-prot.c
arch/powerpc/mm/tlb-radix.c
arch/powerpc/platforms/powermac/time.c
arch/s390/include/asm/css_chars.h
arch/x86/Makefile
arch/x86/boot/compressed/eboot.c
arch/x86/entry/common.c
arch/x86/entry/entry_32.S
arch/x86/entry/entry_64_compat.S
arch/x86/include/asm/barrier.h
arch/x86/include/asm/pgalloc.h
arch/x86/include/asm/pgtable.h
arch/x86/include/asm/pgtable_64.h
arch/x86/include/asm/vmx.h
arch/x86/kernel/apic/x2apic_uv_x.c
arch/x86/kernel/cpu/bugs.c
arch/x86/kernel/cpu/cacheinfo.c
arch/x86/kernel/cpu/common.c
arch/x86/kernel/cpu/mcheck/mce-severity.c
arch/x86/kernel/cpu/mcheck/mce.c
arch/x86/kernel/cpu/microcode/intel.c
arch/x86/kernel/e820.c
arch/x86/kernel/head64.c
arch/x86/kernel/quirks.c
arch/x86/kernel/signal.c
arch/x86/kernel/traps.c
arch/x86/kernel/uprobes.c
arch/x86/kvm/vmx.c
arch/x86/kvm/x86.h
arch/x86/mm/fault.c
arch/x86/mm/init_64.c
arch/x86/platform/efi/efi_64.c
arch/x86/xen/enlighten.c
arch/x86/xen/enlighten_pv.c
arch/x86/xen/enlighten_pvh.c
arch/x86/xen/smp_pv.c
block/bio.c
block/blk-core.c
block/blk-mq-debugfs.c
block/blk-mq.c
block/blk-softirq.c
block/blk-timeout.c
block/sed-opal.c
certs/blacklist.h
crypto/af_alg.c
crypto/algif_aead.c
crypto/algif_skcipher.c
crypto/asymmetric_keys/x509_cert_parser.c
crypto/morus640.c
crypto/sha3_generic.c
drivers/acpi/acpi_lpss.c
drivers/acpi/ec.c
drivers/acpi/osl.c
drivers/base/Makefile
drivers/base/core.c
drivers/base/dma-coherent.c [deleted file]
drivers/base/dma-contiguous.c [deleted file]
drivers/base/dma-mapping.c [deleted file]
drivers/base/power/domain.c
drivers/block/drbd/drbd_req.c
drivers/block/nbd.c
drivers/block/null_blk.c
drivers/bluetooth/hci_nokia.c
drivers/bus/ti-sysc.c
drivers/char/hw_random/core.c
drivers/char/random.c
drivers/clk/ti/clk-7xx.c
drivers/clocksource/timer-stm32.c
drivers/cpufreq/intel_pstate.c
drivers/cpufreq/qcom-cpufreq-kryo.c
drivers/crypto/chelsio/chtls/chtls_io.c
drivers/dax/super.c
drivers/firmware/dmi-id.c
drivers/firmware/dmi_scan.c
drivers/firmware/efi/libstub/tpm.c
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c
drivers/gpu/drm/amd/amdgpu/amdgpu_object.c
drivers/gpu/drm/amd/amdgpu/amdgpu_ttm.h
drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c
drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.h
drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c
drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c
drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
drivers/gpu/drm/amd/powerplay/hwmgr/vega10_powertune.c
drivers/gpu/drm/arm/malidp_drv.c
drivers/gpu/drm/arm/malidp_hw.c
drivers/gpu/drm/arm/malidp_planes.c
drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c
drivers/gpu/drm/bridge/sil-sii8620.c
drivers/gpu/drm/drm_drv.c
drivers/gpu/drm/i915/i915_drv.h
drivers/gpu/drm/i915/i915_gem.c
drivers/gpu/drm/i915/i915_gem_context.c
drivers/gpu/drm/i915/i915_gem_execbuffer.c
drivers/gpu/drm/i915/i915_irq.c
drivers/gpu/drm/i915/i915_reg.h
drivers/gpu/drm/i915/intel_crt.c
drivers/gpu/drm/i915/intel_display.c
drivers/gpu/drm/i915/intel_dp.c
drivers/gpu/drm/i915/intel_dp_mst.c
drivers/gpu/drm/i915/intel_dsi.c
drivers/gpu/drm/i915/intel_dvo.c
drivers/gpu/drm/i915/intel_hdmi.c
drivers/gpu/drm/i915/intel_lrc.c
drivers/gpu/drm/i915/intel_lvds.c
drivers/gpu/drm/i915/intel_sdvo.c
drivers/gpu/drm/i915/intel_tv.c
drivers/gpu/drm/meson/meson_drv.c
drivers/gpu/drm/nouveau/dispnv50/curs507a.c
drivers/gpu/drm/nouveau/dispnv50/wndw.c
drivers/gpu/drm/qxl/qxl_display.c
drivers/gpu/drm/sun4i/sun4i_tcon.c
drivers/hid/hid-google-hammer.c
drivers/hid/hid-ids.h
drivers/hid/hid-steam.c
drivers/hid/intel-ish-hid/ipc/pci-ish.c
drivers/hid/wacom_sys.c
drivers/hwmon/dell-smm-hwmon.c
drivers/hwmon/nct6775.c
drivers/i2c/algos/i2c-algo-bit.c
drivers/i2c/busses/i2c-gpio.c
drivers/i2c/i2c-core-smbus.c
drivers/iio/accel/mma8452.c
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
drivers/iio/light/tsl2772.c
drivers/iio/pressure/bmp280-core.c
drivers/infiniband/core/uverbs_main.c
drivers/infiniband/core/verbs.c
drivers/infiniband/hw/mlx4/mr.c
drivers/infiniband/hw/mlx5/main.c
drivers/infiniband/hw/qedr/verbs.c
drivers/infiniband/sw/rxe/rxe_req.c
drivers/input/input-mt.c
drivers/input/joystick/xpad.c
drivers/input/keyboard/goldfish_events.c
drivers/input/misc/Kconfig
drivers/input/misc/Makefile
drivers/input/misc/sc27xx-vibra.c [new file with mode: 0644]
drivers/input/mouse/elan_i2c.h
drivers/input/mouse/elan_i2c_core.c
drivers/input/mouse/elan_i2c_smbus.c
drivers/input/mouse/elantech.c
drivers/input/mouse/psmouse-base.c
drivers/input/rmi4/Kconfig
drivers/input/rmi4/rmi_2d_sensor.c
drivers/input/rmi4/rmi_bus.c
drivers/input/rmi4/rmi_bus.h
drivers/input/rmi4/rmi_driver.c
drivers/input/rmi4/rmi_f01.c
drivers/input/rmi4/rmi_f03.c
drivers/input/rmi4/rmi_f11.c
drivers/input/rmi4/rmi_f12.c
drivers/input/rmi4/rmi_f30.c
drivers/input/rmi4/rmi_f34.c
drivers/input/rmi4/rmi_f54.c
drivers/input/touchscreen/silead.c
drivers/irqchip/irq-gic-v2m.c
drivers/irqchip/irq-gic-v3-its.c
drivers/irqchip/irq-ls-scfg-msi.c
drivers/isdn/mISDN/socket.c
drivers/lightnvm/Kconfig
drivers/md/dm-raid.c
drivers/md/dm-table.c
drivers/md/dm-thin-metadata.c
drivers/md/dm-thin.c
drivers/md/dm-writecache.c
drivers/md/dm-zoned-target.c
drivers/md/dm.c
drivers/mtd/chips/cfi_cmdset_0002.c
drivers/mtd/devices/mtd_dataflash.c
drivers/mtd/nand/raw/denali_dt.c
drivers/mtd/nand/raw/mxc_nand.c
drivers/mtd/nand/raw/nand_base.c
drivers/mtd/nand/raw/nand_macronix.c
drivers/mtd/nand/raw/nand_micron.c
drivers/net/ethernet/amd/Kconfig
drivers/net/ethernet/apm/xgene-v2/Kconfig
drivers/net/ethernet/apm/xgene/Kconfig
drivers/net/ethernet/arc/Kconfig
drivers/net/ethernet/broadcom/Kconfig
drivers/net/ethernet/cadence/macb_ptp.c
drivers/net/ethernet/calxeda/Kconfig
drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c
drivers/net/ethernet/cisco/enic/enic_clsf.c
drivers/net/ethernet/cisco/enic/enic_main.c
drivers/net/ethernet/faraday/ftgmac100.c
drivers/net/ethernet/hisilicon/Kconfig
drivers/net/ethernet/intel/i40e/i40e_txrx.c
drivers/net/ethernet/marvell/Kconfig
drivers/net/ethernet/marvell/mvneta.c
drivers/net/ethernet/mellanox/mlxsw/Kconfig
drivers/net/ethernet/mscc/ocelot.c
drivers/net/ethernet/qlogic/qed/qed_dcbx.c
drivers/net/ethernet/qlogic/qed/qed_ll2.c
drivers/net/ethernet/qlogic/qed/qed_main.c
drivers/net/ethernet/realtek/r8169.c
drivers/net/ethernet/renesas/Kconfig
drivers/net/ethernet/sfc/efx.c
drivers/net/ethernet/stmicro/stmmac/Kconfig
drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
drivers/net/ethernet/sun/sungem.c
drivers/net/ethernet/ti/davinci_cpdma.c
drivers/net/ethernet/ti/davinci_emac.c
drivers/net/hamradio/bpqether.c
drivers/net/ipvlan/ipvlan_main.c
drivers/net/net_failover.c
drivers/net/ppp/pppoe.c
drivers/net/usb/cdc_ncm.c
drivers/net/usb/qmi_wwan.c
drivers/net/wireless/broadcom/brcm80211/Kconfig
drivers/net/wireless/quantenna/qtnfmac/Kconfig
drivers/net/xen-netfront.c
drivers/nfc/pn533/usb.c
drivers/nvdimm/pmem.c
drivers/nvme/host/core.c
drivers/nvme/host/fc.c
drivers/nvme/host/nvme.h
drivers/nvme/host/pci.c
drivers/nvme/host/rdma.c
drivers/nvme/target/core.c
drivers/opp/core.c
drivers/pci/Makefile
drivers/pci/controller/Kconfig
drivers/pci/hotplug/acpi_pcihp.c
drivers/perf/xgene_pmu.c
drivers/pinctrl/actions/pinctrl-owl.c
drivers/pinctrl/devicetree.c
drivers/pinctrl/mediatek/pinctrl-mt7622.c
drivers/pinctrl/mediatek/pinctrl-mtk-common.c
drivers/pinctrl/pinctrl-single.c
drivers/ptp/ptp_chardev.c
drivers/ptp/ptp_qoriq.c
drivers/s390/block/dasd.c
drivers/s390/block/dasd_alias.c
drivers/s390/block/dasd_diag.c
drivers/s390/block/dasd_eckd.c
drivers/s390/block/dasd_eer.c
drivers/s390/block/dasd_fba.c
drivers/s390/block/dasd_int.h
drivers/s390/cio/Makefile
drivers/s390/cio/vfio_ccw_cp.c
drivers/s390/cio/vfio_ccw_drv.c
drivers/s390/cio/vfio_ccw_fsm.c
drivers/s390/cio/vfio_ccw_trace.h [new file with mode: 0644]
drivers/scsi/ipr.c
drivers/scsi/qla2xxx/qla_target.c
drivers/scsi/scsi_debug.c
drivers/scsi/scsi_transport_fc.c
drivers/scsi/xen-scsifront.c
drivers/soc/imx/gpcv2.c
drivers/soc/qcom/Kconfig
drivers/soc/renesas/rcar-sysc.c
drivers/staging/android/ion/ion_heap.c
drivers/staging/comedi/drivers/quatech_daqp_cs.c
drivers/staging/typec/Kconfig
drivers/target/target_core_user.c
drivers/tty/n_tty.c
drivers/tty/serdev/core.c
drivers/tty/serial/8250/8250_pci.c
drivers/tty/vt/vt.c
drivers/usb/chipidea/host.c
drivers/usb/class/cdc-acm.c
drivers/usb/dwc2/core.h
drivers/usb/dwc2/gadget.c
drivers/usb/dwc2/hcd.c
drivers/usb/dwc2/hcd.h
drivers/usb/dwc2/hcd_intr.c
drivers/usb/dwc2/hcd_queue.c
drivers/usb/dwc3/core.c
drivers/usb/dwc3/dwc3-of-simple.c
drivers/usb/dwc3/dwc3-pci.c
drivers/usb/dwc3/dwc3-qcom.c
drivers/usb/gadget/composite.c
drivers/usb/gadget/function/f_fs.c
drivers/usb/host/xhci-mem.c
drivers/usb/host/xhci-tegra.c
drivers/usb/host/xhci-trace.h
drivers/usb/host/xhci.c
drivers/usb/host/xhci.h
drivers/usb/serial/cp210x.c
drivers/usb/typec/tcpm.c
drivers/usb/typec/ucsi/ucsi.c
drivers/usb/typec/ucsi/ucsi_acpi.c
drivers/vhost/net.c
drivers/xen/Makefile
drivers/xen/events/events_base.c
drivers/xen/grant-table.c
drivers/xen/manage.c
drivers/xen/privcmd-buf.c [new file with mode: 0644]
drivers/xen/privcmd.c
drivers/xen/privcmd.h
drivers/xen/xen-scsiback.c
fs/aio.c
fs/btrfs/extent_io.c
fs/btrfs/inode.c
fs/btrfs/ioctl.c
fs/btrfs/qgroup.c
fs/ceph/inode.c
fs/cifs/cifs_debug.c
fs/cifs/cifsencrypt.c
fs/cifs/cifsglob.h
fs/cifs/cifsproto.h
fs/cifs/cifssmb.c
fs/cifs/connect.c
fs/cifs/inode.c
fs/cifs/misc.c
fs/cifs/smb2misc.c
fs/cifs/smb2ops.c
fs/cifs/smb2pdu.c
fs/cifs/smb2pdu.h
fs/cifs/smb2proto.h
fs/cifs/smb2transport.c
fs/cifs/smbdirect.c
fs/cifs/trace.h
fs/cifs/transport.c
fs/eventfd.c
fs/eventpoll.c
fs/ext2/ext2.h
fs/ext2/super.c
fs/jfs/xattr.c
fs/nfs/delegation.c
fs/nfs/flexfilelayout/flexfilelayout.c
fs/nfs/nfs4proc.c
fs/nfs/pnfs.h
fs/pipe.c
fs/proc/base.c
fs/proc/generic.c
fs/quota/dquot.c
fs/select.c
fs/timerfd.c
fs/udf/balloc.c
fs/udf/directory.c
fs/udf/inode.c
fs/udf/namei.c
fs/udf/udfdecl.h
fs/xfs/libxfs/xfs_ag_resv.c
fs/xfs/libxfs/xfs_bmap.c
fs/xfs/libxfs/xfs_bmap.h
fs/xfs/libxfs/xfs_format.h
fs/xfs/libxfs/xfs_inode_buf.c
fs/xfs/libxfs/xfs_rtbitmap.c
fs/xfs/xfs_bmap_util.c
fs/xfs/xfs_fsmap.c
fs/xfs/xfs_fsops.c
fs/xfs/xfs_inode.c
fs/xfs/xfs_iomap.c
fs/xfs/xfs_trans.c
include/acpi/processor.h
include/asm-generic/qspinlock_types.h
include/crypto/if_alg.h
include/dt-bindings/bus/ti-sysc.h
include/dt-bindings/clock/dra7.h
include/linux/acpi.h
include/linux/atmdev.h
include/linux/backing-dev-defs.h
include/linux/blkdev.h
include/linux/bpf.h
include/linux/compat.h
include/linux/compiler-gcc.h
include/linux/compiler_types.h
include/linux/dax.h
include/linux/dma-contiguous.h
include/linux/filter.h
include/linux/fs.h
include/linux/iio/buffer-dma.h
include/linux/input/mt.h
include/linux/irq.h
include/linux/irqdesc.h
include/linux/kernel.h
include/linux/memory.h
include/linux/mod_devicetable.h
include/linux/net.h
include/linux/nfs_xdr.h
include/linux/platform_data/ti-sysc.h
include/linux/pm_domain.h
include/linux/poll.h
include/linux/refcount.h
include/linux/rmi.h
include/linux/scatterlist.h
include/linux/sched.h
include/linux/skbuff.h
include/linux/slub_def.h
include/linux/spinlock.h
include/linux/syscalls.h
include/net/bluetooth/bluetooth.h
include/net/ip6_fib.h
include/net/iucv/af_iucv.h
include/net/sctp/sctp.h
include/net/tcp.h
include/net/tls.h
include/net/udp.h
include/rdma/ib_verbs.h
include/uapi/linux/aio_abi.h
include/uapi/linux/nbd.h
include/uapi/linux/target_core_user.h
include/xen/xen.h
init/Kconfig
kernel/Makefile
kernel/bpf/core.c
kernel/bpf/devmap.c
kernel/bpf/syscall.c
kernel/dma/Kconfig [new file with mode: 0644]
kernel/dma/Makefile [new file with mode: 0644]
kernel/dma/coherent.c [new file with mode: 0644]
kernel/dma/contiguous.c [new file with mode: 0644]
kernel/dma/debug.c [new file with mode: 0644]
kernel/dma/direct.c [new file with mode: 0644]
kernel/dma/mapping.c [new file with mode: 0644]
kernel/dma/noncoherent.c [new file with mode: 0644]
kernel/dma/swiotlb.c [new file with mode: 0644]
kernel/dma/virt.c [new file with mode: 0644]
kernel/events/core.c
kernel/events/ring_buffer.c
kernel/irq/debugfs.c
kernel/locking/lockdep.c
kernel/locking/rwsem.c
kernel/rseq.c
kernel/softirq.c
kernel/time/hrtimer.c
kernel/time/posix-cpu-timers.c
kernel/time/time.c
kernel/trace/trace.c
kernel/trace/trace_events_filter.c
lib/Kconfig
lib/Kconfig.kasan
lib/Makefile
lib/dec_and_lock.c
lib/dma-debug.c [deleted file]
lib/dma-direct.c [deleted file]
lib/dma-noncoherent.c [deleted file]
lib/dma-virt.c [deleted file]
lib/percpu_ida.c
lib/refcount.c
lib/scatterlist.c
lib/swiotlb.c [deleted file]
lib/test_printf.c
mm/backing-dev.c
mm/memblock.c
mm/slab_common.c
mm/slub.c
mm/vmstat.c
net/appletalk/ddp.c
net/atm/br2684.c
net/atm/clip.c
net/atm/common.c
net/atm/common.h
net/atm/lec.c
net/atm/mpc.c
net/atm/pppoatm.c
net/atm/pvc.c
net/atm/raw.c
net/atm/svc.c
net/ax25/af_ax25.c
net/bluetooth/af_bluetooth.c
net/bluetooth/hci_sock.c
net/bluetooth/l2cap_sock.c
net/bluetooth/rfcomm/sock.c
net/bluetooth/sco.c
net/bpfilter/.gitignore [new file with mode: 0644]
net/bpfilter/Makefile
net/caif/caif_socket.c
net/can/bcm.c
net/can/raw.c
net/core/datagram.c
net/core/dev.c
net/core/filter.c
net/dccp/ccids/ccid3.c
net/dccp/dccp.h
net/dccp/ipv4.c
net/dccp/ipv6.c
net/dccp/proto.c
net/decnet/af_decnet.c
net/ieee802154/socket.c
net/ipv4/af_inet.c
net/ipv4/inet_hashtables.c
net/ipv4/ip_output.c
net/ipv4/tcp.c
net/ipv4/udp.c
net/ipv6/af_inet6.c
net/ipv6/inet6_hashtables.c
net/ipv6/ip6_fib.c
net/ipv6/ip6_output.c
net/ipv6/mcast.c
net/ipv6/raw.c
net/iucv/af_iucv.c
net/kcm/kcmsock.c
net/key/af_key.c
net/l2tp/l2tp_ip.c
net/l2tp/l2tp_ip6.c
net/l2tp/l2tp_ppp.c
net/llc/af_llc.c
net/ncsi/ncsi-aen.c
net/ncsi/ncsi-manage.c
net/netlink/af_netlink.c
net/netrom/af_netrom.c
net/nfc/llcp_sock.c
net/nfc/rawsock.c
net/packet/af_packet.c
net/phonet/socket.c
net/qrtr/qrtr.c
net/rose/af_rose.c
net/rxrpc/af_rxrpc.c
net/sched/act_ife.c
net/sched/cls_flower.c
net/sched/sch_blackhole.c
net/sched/sch_hfsc.c
net/sctp/chunk.c
net/sctp/ipv6.c
net/sctp/protocol.c
net/sctp/socket.c
net/smc/af_smc.c
net/socket.c
net/strparser/strparser.c
net/sunrpc/xprt.c
net/tipc/socket.c
net/tls/tls_main.c
net/tls/tls_sw.c
net/unix/af_unix.c
net/vmw_vsock/af_vsock.c
net/vmw_vsock/virtio_transport.c
net/x25/af_x25.c
net/xdp/xsk.c
scripts/Makefile.build
scripts/checkpatch.pl
scripts/gcc-x86_64-has-stack-protector.sh
scripts/kconfig/expr.h
scripts/kconfig/preprocess.c
scripts/kconfig/zconf.y
security/keys/dh.c
security/selinux/selinuxfs.c
security/smack/smack_lsm.c
sound/core/seq/seq_clientmgr.c
sound/core/timer.c
sound/pci/hda/hda_codec.c
sound/pci/hda/hda_codec.h
sound/pci/hda/patch_ca0132.c
sound/pci/hda/patch_hdmi.c
sound/pci/hda/patch_realtek.c
sound/pci/lx6464es/lx6464es.c
tools/arch/arm/include/uapi/asm/kvm.h
tools/arch/arm64/include/uapi/asm/kvm.h
tools/arch/powerpc/include/uapi/asm/kvm.h
tools/arch/powerpc/include/uapi/asm/unistd.h
tools/arch/x86/include/asm/cpufeatures.h
tools/bpf/bpftool/perf.c
tools/bpf/bpftool/prog.c
tools/include/uapi/drm/drm.h
tools/include/uapi/linux/bpf.h
tools/include/uapi/linux/if_link.h
tools/include/uapi/linux/kvm.h
tools/objtool/check.c
tools/perf/Documentation/perf-stat.txt
tools/perf/arch/powerpc/util/skip-callchain-idx.c
tools/perf/arch/x86/entry/syscalls/syscall_64.tbl
tools/perf/bench/numa.c
tools/perf/builtin-annotate.c
tools/perf/builtin-c2c.c
tools/perf/builtin-report.c
tools/perf/builtin-script.c
tools/perf/builtin-stat.c
tools/perf/tests/parse-events.c
tools/perf/tests/topology.c
tools/perf/ui/gtk/hists.c
tools/perf/util/c++/clang.cpp
tools/perf/util/header.c
tools/perf/util/hist.c
tools/perf/util/hist.h
tools/perf/util/intel-pt-decoder/intel-pt-pkt-decoder.c
tools/perf/util/parse-events.y
tools/perf/util/pmu.c
tools/perf/util/sort.h
tools/power/x86/turbostat/turbostat.8
tools/power/x86/turbostat/turbostat.c
tools/testing/selftests/bpf/config
tools/testing/selftests/bpf/test_offload.py
tools/testing/selftests/bpf/test_tunnel.sh
tools/testing/selftests/net/.gitignore
tools/testing/selftests/net/config
tools/testing/selftests/pstore/pstore_post_reboot_tests
tools/testing/selftests/rseq/param_test.c
tools/testing/selftests/rseq/rseq-arm.h
tools/testing/selftests/rseq/rseq-mips.h [new file with mode: 0644]
tools/testing/selftests/rseq/rseq.h
tools/testing/selftests/rseq/run_param_test.sh [changed mode: 0644->0755]
tools/testing/selftests/sparc64/Makefile
tools/testing/selftests/sparc64/drivers/Makefile
tools/testing/selftests/static_keys/test_static_keys.sh
tools/testing/selftests/sync/config [new file with mode: 0644]
tools/testing/selftests/sysctl/sysctl.sh
tools/testing/selftests/user/test_user_copy.sh
tools/testing/selftests/vm/compaction_test.c
tools/testing/selftests/vm/mlock2-tests.c
tools/testing/selftests/vm/run_vmtests
tools/testing/selftests/vm/userfaultfd.c
tools/testing/selftests/x86/sigreturn.c
tools/testing/selftests/zram/zram.sh
tools/testing/selftests/zram/zram_lib.sh
tools/virtio/linux/scatterlist.h
virt/kvm/Kconfig
virt/kvm/arm/mmu.c
virt/kvm/arm/vgic/vgic-v3.c
virt/kvm/kvm_main.c

index ab2fe0eda1d7c317faefab52363ce96755ac64d5..8f1d3de449b53fedcc78d1aee506e6882f2be90c 100644 (file)
@@ -324,8 +324,7 @@ Global Attributes
 
 ``intel_pstate`` exposes several global attributes (files) in ``sysfs`` to
 control its functionality at the system level.  They are located in the
-``/sys/devices/system/cpu/cpufreq/intel_pstate/`` directory and affect all
-CPUs.
+``/sys/devices/system/cpu/intel_pstate/`` directory and affect all CPUs.
 
 Some of them are not present if the ``intel_pstate=per_cpu_perf_limits``
 argument is passed to the kernel in the command line.
@@ -379,6 +378,17 @@ argument is passed to the kernel in the command line.
        but it affects the maximum possible value of per-policy P-state limits
        (see `Interpretation of Policy Attributes`_ below for details).
 
+``hwp_dynamic_boost``
+       This attribute is only present if ``intel_pstate`` works in the
+       `active mode with the HWP feature enabled <Active Mode With HWP_>`_ in
+       the processor.  If set (equal to 1), it causes the minimum P-state limit
+       to be increased dynamically for a short time whenever a task previously
+       waiting on I/O is selected to run on a given logical CPU (the purpose
+       of this mechanism is to improve performance).
+
+       This setting has no effect on logical CPUs whose minimum P-state limit
+       is directly set to the highest non-turbo P-state or above it.
+
 .. _status_attr:
 
 ``status``
@@ -410,7 +420,7 @@ argument is passed to the kernel in the command line.
        That only is supported in some configurations, though (for example, if
        the `HWP feature is enabled in the processor <Active Mode With HWP_>`_,
        the operation mode of the driver cannot be changed), and if it is not
-       supported in the current configuration, writes to this attribute with
+       supported in the current configuration, writes to this attribute will
        fail with an appropriate error.
 
 Interpretation of Policy Attributes
index 8e44aea366c262068900cddaabd240d8615ac552..76fe2d0f5e7d7db307bfa4ead890ead2d8840bdd 100644 (file)
@@ -284,7 +284,7 @@ Resources Management
 MTRR Handling
 -------------
 
-.. kernel-doc:: arch/x86/kernel/cpu/mtrr/main.c
+.. kernel-doc:: arch/x86/kernel/cpu/mtrr/mtrr.c
    :export:
 
 Security Framework
index 29e1dc5d506dc4ce692abcaceb5eb691dc33f507..c4090c5a4f9f5b5128556ae7d4641f810c3fb6e5 100644 (file)
@@ -183,6 +183,7 @@ described below.
                            "marvell,sheeva-v5"
                            "nvidia,tegra132-denver"
                            "nvidia,tegra186-denver"
+                           "nvidia,tegra194-carmel"
                            "qcom,krait"
                            "qcom,kryo"
                            "qcom,kryo385"
diff --git a/Documentation/devicetree/bindings/arm/insignal-boards.txt b/Documentation/devicetree/bindings/arm/insignal-boards.txt
deleted file mode 100644 (file)
index 524c3dc..0000000
+++ /dev/null
@@ -1,8 +0,0 @@
-* Insignal's Exynos4210 based Origen evaluation board
-
-Origen low-cost evaluation board is based on Samsung's Exynos4210 SoC.
-
-Required root node properties:
-    - compatible = should be one or more of the following.
-        (a) "samsung,smdkv310" - for Samsung's SMDKV310 eval board.
-        (b) "samsung,exynos4210"  - for boards based on Exynos4210 SoC.
index 1c1d62d03c4ff293100385581a6c2367570c05c3..145ab0b0a030aa5a66ede4307b04acde62784aec 100644 (file)
@@ -66,6 +66,15 @@ Rockchip platforms device tree bindings
     Required root node properties:
       - compatible = "geekbuying,geekbox", "rockchip,rk3368";
 
+- Google Bob (Asus Chromebook Flip C101PA):
+    Required root node properties:
+       compatible = "google,bob-rev13", "google,bob-rev12",
+                    "google,bob-rev11", "google,bob-rev10",
+                    "google,bob-rev9", "google,bob-rev8",
+                    "google,bob-rev7", "google,bob-rev6",
+                    "google,bob-rev5", "google,bob-rev4",
+                    "google,bob", "google,gru", "rockchip,rk3399";
+
 - Google Brain (dev-board):
     Required root node properties:
       - compatible = "google,veyron-brain-rev0", "google,veyron-brain",
index bdadc3da9556d47e52372f0a68846779dccc1d95..ff75bf7ac3a228af183e7fc029dcc48d1ba3c719 100644 (file)
@@ -1,7 +1,10 @@
-* Samsung's Exynos SoC based boards
+* Samsung's Exynos and S5P SoC based boards
 
 Required root node properties:
     - compatible = should be one or more of the following.
+       - "samsung,aries"       - for S5PV210-based Samsung Aries board.
+       - "samsung,fascinate4g" - for S5PV210-based Samsung Galaxy S Fascinate 4G (SGH-T959P) board.
+       - "samsung,galaxys"     - for S5PV210-based Samsung Galaxy S (i9000)  board.
        - "samsung,artik5"      - for Exynos3250-based Samsung ARTIK5 module.
        - "samsung,artik5-eval" - for Exynos3250-based Samsung ARTIK5 eval board.
        - "samsung,monk"        - for Exynos3250-based Samsung Simband board.
index d8ed5b780ed9d31dec1ee7b59aa6758abde4b41d..91dc2333af012771e915981ed5df8bb8800d8d5b 100644 (file)
@@ -36,6 +36,7 @@ Required standard properties:
                "ti,sysc-omap-aes"
                "ti,sysc-mcasp"
                "ti,sysc-usb-host-fs"
+               "ti,sysc-dra7-mcan"
 
 - reg          shall have register areas implemented for the interconnect
                target module in question such as revision, sysc and syss
diff --git a/Documentation/devicetree/bindings/input/sprd,sc27xx-vibra.txt b/Documentation/devicetree/bindings/input/sprd,sc27xx-vibra.txt
new file mode 100644 (file)
index 0000000..f2ec0d4
--- /dev/null
@@ -0,0 +1,23 @@
+Spreadtrum SC27xx PMIC Vibrator
+
+Required properties:
+- compatible: should be "sprd,sc2731-vibrator".
+- reg: address of vibrator control register.
+
+Example :
+
+       sc2731_pmic: pmic@0 {
+               compatible = "sprd,sc2731";
+               reg = <0>;
+               spi-max-frequency = <26000000>;
+               interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+               interrupt-controller;
+               #interrupt-cells = <2>;
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               vibrator@eb4 {
+                       compatible = "sprd,sc2731-vibrator";
+                       reg = <0xeb4>;
+               };
+       };
index 74c9ba6c2823d9d1dc0704bc7338f8b3414e2eca..efd3fb1f68d2b96af04c1df2cc16e36eaf461e6e 100644 (file)
@@ -9,20 +9,18 @@ Example:
 
        /* upstream device */
 
-       ssp0: ssp@41000000 {
+       ssp1: ssp@41000000 {
                compatible = "mrvl,pxa3xx-ssp";
                reg = <0x41000000 0x40>;
                interrupts = <24>;
                clock-names = "pxa27x-ssp.0";
-               dmas = <&dma 13
-                       &dma 14>;
-               dma-names = "rx", "tx";
        };
 
        /* DAI as user */
 
        ssp_dai0: ssp_dai@0 {
                compatible = "mrvl,pxa-ssp-dai";
-               port = <&ssp0>;
+               port = <&ssp1>;
+               #sound-dai-cells = <0>;
        };
 
diff --git a/Documentation/devicetree/bindings/timer/ti,davinci-timer.txt b/Documentation/devicetree/bindings/timer/ti,davinci-timer.txt
new file mode 100644 (file)
index 0000000..29bf91c
--- /dev/null
@@ -0,0 +1,37 @@
+* Device tree bindings for Texas Instruments DaVinci timer
+
+This document provides bindings for the 64-bit timer in the DaVinci
+architecture devices. The timer can be configured as a general-purpose 64-bit
+timer, dual general-purpose 32-bit timers. When configured as dual 32-bit
+timers, each half can operate in conjunction (chain mode) or independently
+(unchained mode) of each other.
+
+The timer is a free running up-counter and can generate interrupts when the
+counter reaches preset counter values.
+
+Also see ../watchdog/davinci-wdt.txt for timers that are configurable as
+watchdog timers.
+
+Required properties:
+
+- compatible : should be "ti,da830-timer".
+- reg : specifies base physical address and count of the registers.
+- interrupts : interrupts generated by the timer.
+- interrupt-names: should be "tint12", "tint34", "cmpint0", "cmpint1",
+                  "cmpint2", "cmpint3", "cmpint4", "cmpint5", "cmpint6",
+                  "cmpint7" ("cmpintX" may be omitted if not present in the
+                  hardware).
+- clocks : the clock feeding the timer clock.
+
+Example:
+
+       clocksource: timer@20000 {
+               compatible = "ti,da830-timer";
+               reg = <0x20000 0x1000>;
+               interrupts = <21>, <22>, <74>, <75>, <76>, <77>, <78>, <79>,
+                            <80>, <81>;
+               interrupt-names = "tint12", "tint34", "cmpint0", "cmpint1",
+                                 "cmpint2", "cmpint3", "cmpint4", "cmpint5",
+                                 "cmpint6", "cmpint7";
+               clocks = <&pll0_auxclk>;
+       };
index bee1b9a1702f1cc6c89811aff6b8bdbc1eefb0b0..6172f3cc3d0b2109916cfccda2da1836065f8766 100644 (file)
@@ -49,10 +49,10 @@ Device Drivers Base
 Device Drivers DMA Management
 -----------------------------
 
-.. kernel-doc:: drivers/base/dma-coherent.c
+.. kernel-doc:: kernel/dma/coherent.c
    :export:
 
-.. kernel-doc:: drivers/base/dma-mapping.c
+.. kernel-doc:: kernel/dma/mapping.c
    :export:
 
 Device drivers PnP support
index 2c391338c6757f505eac6dfcbe98a169452ad305..37bf0a9de75cbe79794e653ff161e4a5eb37a97a 100644 (file)
@@ -441,8 +441,6 @@ prototypes:
        int (*iterate) (struct file *, struct dir_context *);
        int (*iterate_shared) (struct file *, struct dir_context *);
        __poll_t (*poll) (struct file *, struct poll_table_struct *);
-       struct wait_queue_head * (*get_poll_head)(struct file *, __poll_t);
-       __poll_t (*poll_mask) (struct file *, __poll_t);
        long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long);
        long (*compat_ioctl) (struct file *, unsigned int, unsigned long);
        int (*mmap) (struct file *, struct vm_area_struct *);
@@ -473,7 +471,7 @@ prototypes:
 };
 
 locking rules:
-       All except for ->poll_mask may block.
+       All may block.
 
 ->llseek() locking has moved from llseek to the individual llseek
 implementations.  If your fs is not using generic_file_llseek, you
@@ -505,9 +503,6 @@ in sys_read() and friends.
 the lease within the individual filesystem to record the result of the
 operation
 
-->poll_mask can be called with or without the waitqueue lock for the waitqueue
-returned from ->get_poll_head.
-
 --------------------------- dquot_operations -------------------------------
 prototypes:
        int (*write_dquot) (struct dquot *);
index 9f4f87e1624036349533adf9534bfd3c4b08535d..75865da2ce1475c27bea1050b3e80ff7160f6d6f 100644 (file)
@@ -42,9 +42,11 @@ Jeff Layton (many, many fixes, as well as great work on the cifs Kerberos code)
 Scott Lovenberg
 Pavel Shilovsky (for great work adding SMB2 support, and various SMB3 features)
 Aurelien Aptel (for DFS SMB3 work and some key bug fixes)
-Ronnie Sahlberg (for SMB3 xattr work and bug fixes)
+Ronnie Sahlberg (for SMB3 xattr work, bug fixes, and lots of great work on compounding)
 Shirish Pargaonkar (for many ACL patches over the years)
 Sachin Prabhu (many bug fixes, including for reconnect, copy offload and security)
+Paulo Alcantara
+Long Li (some great work on RDMA, SMB Direct)
 
 
 Test case and Bug Report contributors
@@ -58,5 +60,4 @@ mention to the Stanford Checker (SWAT) which pointed out many minor
 bugs in error paths.  Valuable suggestions also have come from Al Viro
 and Dave Miller.
 
-And thanks to the IBM LTC and Power test teams and SuSE testers for
-finding multiple bugs during excellent stress test runs.
+And thanks to the IBM LTC and Power test teams and SuSE and Citrix and RedHat testers for finding multiple bugs during excellent stress test runs.
index bc0025cdd1c9c0d285c32e8d7656103868126ca8..455e1cc494a9f2e78ee1d45b89bfbe5ee55048eb 100644 (file)
@@ -1,3 +1,6 @@
+See https://wiki.samba.org/index.php/LinuxCIFSKernel for
+more current information.
+
 Version 1.62
 ------------
 Add sockopt=TCP_NODELAY mount option. EA (xattr) routines hardened
index c5adf149b57f7f8f6e2d0b104d5b74f6bc7f5f84..852499aed64b52bb321c0b9656b0b606a4710772 100644 (file)
@@ -9,14 +9,14 @@ is a partial list of the known problems and missing features:
 
 a) SMB3 (and SMB3.02) missing optional features:
    - multichannel (started), integration with RDMA
-   - directory leases (improved metadata caching)
-   - T10 copy offload (copy chunk, and "Duplicate Extents" ioctl
+   - directory leases (improved metadata caching), started (root dir only)
+   - T10 copy offload ie "ODX" (copy chunk, and "Duplicate Extents" ioctl
      currently the only two server side copy mechanisms supported)
 
 b) improved sparse file support
 
 c) Directory entry caching relies on a 1 second timer, rather than
-using Directory Leases
+using Directory Leases, currently only the root file handle is cached longer
 
 d) quota support (needs minor kernel change since quota calls
 to make it to network filesystems or deviceless filesystems)
@@ -42,6 +42,8 @@ mount or a per server basis to client UIDs or nobody if no mapping
 exists. Also better integration with winbind for resolving SID owners
 
 k) Add tools to take advantage of more smb3 specific ioctls and features
+(passthrough ioctl/fsctl for sending various SMB3 fsctls to the server
+is in progress)
 
 l) encrypted file support
 
@@ -71,9 +73,8 @@ t) split cifs and smb3 support into separate modules so legacy (and less
 secure) CIFS dialect can be disabled in environments that don't need it
 and simplify the code.
 
-u) Finish up SMB3.1.1 dialect support
-
-v) POSIX Extensions for SMB3.1.1
+v) POSIX Extensions for SMB3.1.1 (started, create and mkdir support added
+so far).
 
 KNOWN BUGS
 ====================================
@@ -92,8 +93,8 @@ Misc testing to do
 1) check out max path names and max path name components against various server
 types. Try nested symlinks (8 deep). Return max path name in stat -f information
 
-2) Improve xfstest's cifs enablement and adapt xfstests where needed to test
-cifs better
+2) Improve xfstest's cifs/smb3 enablement and adapt xfstests where needed to test
+cifs/smb3 better
 
 3) Additional performance testing and optimization using iozone and similar - 
 there are some easy changes that can be done to parallelize sequential writes,
index 829a7b7857a46904cfb7f02646212504a3a7f259..f608180ad59d71ab2bcc2d2d818699bfaaee1470 100644 (file)
@@ -857,8 +857,6 @@ struct file_operations {
        ssize_t (*write_iter) (struct kiocb *, struct iov_iter *);
        int (*iterate) (struct file *, struct dir_context *);
        __poll_t (*poll) (struct file *, struct poll_table_struct *);
-       struct wait_queue_head * (*get_poll_head)(struct file *, __poll_t);
-       __poll_t (*poll_mask) (struct file *, __poll_t);
        long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long);
        long (*compat_ioctl) (struct file *, unsigned int, unsigned long);
        int (*mmap) (struct file *, struct vm_area_struct *);
@@ -903,17 +901,6 @@ otherwise noted.
        activity on this file and (optionally) go to sleep until there
        is activity. Called by the select(2) and poll(2) system calls
 
-  get_poll_head: Returns the struct wait_queue_head that callers can
-  wait on.  Callers need to check the returned events using ->poll_mask
-  once woken.  Can return NULL to indicate polling is not supported,
-  or any error code using the ERR_PTR convention to indicate that a
-  grave error occured and ->poll_mask shall not be called.
-
-  poll_mask: return the mask of EPOLL* values describing the file descriptor
-  state.  Called either before going to sleep on the waitqueue returned by
-  get_poll_head, or after it has been woken.  If ->get_poll_head and
-  ->poll_mask are implemented ->poll does not need to be implement.
-
   unlocked_ioctl: called by the ioctl(2) system call.
 
   compat_ioctl: called by the ioctl(2) system call when 32 bit system calls
index 3534a84d206caf324423a9422eb985b48c97813b..64e0775a62d4475ec378d033332b5099987954ff 100644 (file)
@@ -430,6 +430,12 @@ This sets the config program's title bar if the config program chooses
 to use it. It should be placed at the top of the configuration, before any
 other statement.
 
+'#' Kconfig source file comment:
+
+An unquoted '#' character anywhere in a source file line indicates
+the beginning of a source file comment.  The remainder of that line
+is a comment.
+
 
 Kconfig hints
 -------------
index d4d8370279254472ed812488ea61d4e3bd64651b..9708f5fa76de2deae7ddf562e757c3d9c4e90079 100644 (file)
@@ -1,3 +1,4 @@
+==============================================================
 Linux* Base Driver for the Intel(R) PRO/100 Family of Adapters
 ==============================================================
 
@@ -86,83 +87,84 @@ Event Log Message Level:  The driver uses the message level flag to log events
 Additional Configurations
 =========================
 
-  Configuring the Driver on Different Distributions
-  -------------------------------------------------
+Configuring the Driver on Different Distributions
+-------------------------------------------------
 
-  Configuring a network driver to load properly when the system is started is
-  distribution dependent. Typically, the configuration process involves adding
-  an alias line to /etc/modprobe.d/*.conf as well as editing other system
-  startup scripts and/or configuration files.  Many popular Linux
-  distributions ship with tools to make these changes for you. To learn the
-  proper way to configure a network device for your system, refer to your
-  distribution documentation.  If during this process you are asked for the
-  driver or module name, the name for the Linux Base Driver for the Intel
-  PRO/100 Family of Adapters is e100.
+Configuring a network driver to load properly when the system is started
+is distribution dependent.  Typically, the configuration process involves
+adding an alias line to /etc/modprobe.d/*.conf as well as editing other
+system startup scripts and/or configuration files.  Many popular Linux
+distributions ship with tools to make these changes for you.  To learn
+the proper way to configure a network device for your system, refer to
+your distribution documentation.  If during this process you are asked
+for the driver or module name, the name for the Linux Base Driver for
+the Intel PRO/100 Family of Adapters is e100.
 
-  As an example, if you install the e100 driver for two PRO/100 adapters
-  (eth0 and eth1), add the following to a configuration file in /etc/modprobe.d/
+As an example, if you install the e100 driver for two PRO/100 adapters
+(eth0 and eth1), add the following to a configuration file in
+/etc/modprobe.d/::
 
        alias eth0 e100
        alias eth1 e100
 
-  Viewing Link Messages
-  ---------------------
-  In order to see link messages and other Intel driver information on your
-  console, you must set the dmesg level up to six. This can be done by
-  entering the following on the command line before loading the e100 driver::
-
-       dmesg -n 6
+Viewing Link Messages
+---------------------
 
-  If you wish to see all messages issued by the driver, including debug
-  messages, set the dmesg level to eight.
+In order to see link messages and other Intel driver information on your
+console, you must set the dmesg level up to six.  This can be done by
+entering the following on the command line before loading the e100
+driver::
 
-  NOTE: This setting is not saved across reboots.
+       dmesg -n 6
 
+If you wish to see all messages issued by the driver, including debug
+messages, set the dmesg level to eight.
 
-  ethtool
-  -------
+NOTE: This setting is not saved across reboots.
 
-  The driver utilizes the ethtool interface for driver configuration and
-  diagnostics, as well as displaying statistical information.  The ethtool
-  version 1.6 or later is required for this functionality.
+ethtool
+-------
 
-  The latest release of ethtool can be found from
-  https://www.kernel.org/pub/software/network/ethtool/
+The driver utilizes the ethtool interface for driver configuration and
+diagnostics, as well as displaying statistical information.  The ethtool
+version 1.6 or later is required for this functionality.
 
-  Enabling Wake on LAN* (WoL)
-  ---------------------------
-  WoL is provided through the ethtool* utility.  For instructions on enabling
-  WoL with ethtool, refer to the ethtool man page.
+The latest release of ethtool can be found from
+https://www.kernel.org/pub/software/network/ethtool/
 
-  WoL will be enabled on the system during the next shut down or reboot. For
-  this driver version, in order to enable WoL, the e100 driver must be
-  loaded when shutting down or rebooting the system.
+Enabling Wake on LAN* (WoL)
+---------------------------
+WoL is provided through the ethtool* utility.  For instructions on
+enabling WoL with ethtool, refer to the ethtool man page.  WoL will be
+enabled on the system during the next shut down or reboot.  For this
+driver version, in order to enable WoL, the e100 driver must be loaded
+when shutting down or rebooting the system.
 
-  NAPI
-  ----
+NAPI
+----
 
-  NAPI (Rx polling mode) is supported in the e100 driver.
+NAPI (Rx polling mode) is supported in the e100 driver.
 
-  See https://wiki.linuxfoundation.org/networking/napi for more information
-  on NAPI.
+See https://wiki.linuxfoundation.org/networking/napi for more
+information on NAPI.
 
-  Multiple Interfaces on Same Ethernet Broadcast Network
-  ------------------------------------------------------
+Multiple Interfaces on Same Ethernet Broadcast Network
+------------------------------------------------------
 
-  Due to the default ARP behavior on Linux, it is not possible to have
-  one system on two IP networks in the same Ethernet broadcast domain
-  (non-partitioned switch) behave as expected. All Ethernet interfaces
-  will respond to IP traffic for any IP address assigned to the system.
-  This results in unbalanced receive traffic.
+Due to the default ARP behavior on Linux, it is not possible to have one
+system on two IP networks in the same Ethernet broadcast domain
+(non-partitioned switch) behave as expected.  All Ethernet interfaces
+will respond to IP traffic for any IP address assigned to the system.
+This results in unbalanced receive traffic.
 
-  If you have multiple interfaces in a server, either turn on ARP
-  filtering by
+If you have multiple interfaces in a server, either turn on ARP
+filtering by
 
-  (1) entering:: echo 1 > /proc/sys/net/ipv4/conf/all/arp_filter
-      (this only works if your kernel's version is higher than 2.4.5), or
+(1) entering:: echo 1 > /proc/sys/net/ipv4/conf/all/arp_filter
+    (this only works if your kernel's version is higher than 2.4.5), or
 
-  (2) installing the interfaces in separate broadcast domains (either
-      in different switches or in a switch partitioned to VLANs).
+(2) installing the interfaces in separate broadcast domains (either
+    in different switches or in a switch partitioned to VLANs).
 
 
 Support
index 616848940e63f7303633e0be67febc86bee6ac6f..144b87eef15341059b06655dcc1b0b65c5822b2a 100644 (file)
@@ -1,3 +1,4 @@
+===========================================================
 Linux* Base Driver for Intel(R) Ethernet Network Connection
 ===========================================================
 
@@ -354,57 +355,58 @@ previously mentioned to force the adapter to the same speed and duplex.
 Additional Configurations
 =========================
 
-  Jumbo Frames
-  ------------
-  Jumbo Frames support is enabled by changing the MTU to a value larger than
-  the default of 1500.  Use the ifconfig command to increase the MTU size.
-  For example::
+Jumbo Frames
+------------
+Jumbo Frames support is enabled by changing the MTU to a value larger
+than the default of 1500.  Use the ifconfig command to increase the MTU
+size.  For example::
 
        ifconfig eth<x> mtu 9000 up
 
-  This setting is not saved across reboots.  It can be made permanent if
-  you add::
+This setting is not saved across reboots.  It can be made permanent if
+you add::
 
        MTU=9000
 
-   to the file /etc/sysconfig/network-scripts/ifcfg-eth<x>.  This example
-   applies to the Red Hat distributions; other distributions may store this
-   setting in a different location.
+to the file /etc/sysconfig/network-scripts/ifcfg-eth<x>.  This example
+applies to the Red Hat distributions; other distributions may store this
+setting in a different location.
+
+Notes: Degradation in throughput performance may be observed in some
+Jumbo frames environments.  If this is observed, increasing the
+application's socket buffer size and/or increasing the
+/proc/sys/net/ipv4/tcp_*mem entry values may help.  See the specific
+application manual and /usr/src/linux*/Documentation/
+networking/ip-sysctl.txt for more details.
 
-  Notes:
-  Degradation in throughput performance may be observed in some Jumbo frames
-  environments. If this is observed, increasing the application's socket buffer
-  size and/or increasing the /proc/sys/net/ipv4/tcp_*mem entry values may help.
-  See the specific application manual and /usr/src/linux*/Documentation/
-  networking/ip-sysctl.txt for more details.
+- The maximum MTU setting for Jumbo Frames is 16110.  This value
+  coincides with the maximum Jumbo Frames size of 16128.
 
-  - The maximum MTU setting for Jumbo Frames is 16110.  This value coincides
-    with the maximum Jumbo Frames size of 16128.
+- Using Jumbo frames at 10 or 100 Mbps is not supported and may result
+  in poor performance or loss of link.
 
-  - Using Jumbo frames at 10 or 100 Mbps is not supported and may result in
-    poor performance or loss of link.
+- Adapters based on the Intel(R) 82542 and 82573V/E controller do not
+  support Jumbo Frames.  These correspond to the following product names:
+  Intel(R) PRO/1000 Gigabit Server Adapter Intel(R) PRO/1000 PM Network
+  Connection
 
-  - Adapters based on the Intel(R) 82542 and 82573V/E controller do not
-    support Jumbo Frames. These correspond to the following product names:
-     Intel(R) PRO/1000 Gigabit Server Adapter
-     Intel(R) PRO/1000 PM Network Connection
+ethtool
+-------
+The driver utilizes the ethtool interface for driver configuration and
+diagnostics, as well as displaying statistical information.  The ethtool
+version 1.6 or later is required for this functionality.
 
-  ethtool
-  -------
-  The driver utilizes the ethtool interface for driver configuration and
-  diagnostics, as well as displaying statistical information.  The ethtool
-  version 1.6 or later is required for this functionality.
+The latest release of ethtool can be found from
+https://www.kernel.org/pub/software/network/ethtool/
 
-  The latest release of ethtool can be found from
-  https://www.kernel.org/pub/software/network/ethtool/
+Enabling Wake on LAN* (WoL)
+---------------------------
+WoL is configured through the ethtool* utility.
 
-  Enabling Wake on LAN* (WoL)
-  ---------------------------
-  WoL is configured through the ethtool* utility.
+WoL will be enabled on the system during the next shut down or reboot.
+For this driver version, in order to enable WoL, the e1000 driver must be
+loaded when shutting down or rebooting the system.
 
-  WoL will be enabled on the system during the next shut down or reboot.
-  For this driver version, in order to enable WoL, the e1000 driver must be
-  loaded when shutting down or rebooting the system.
 
 Support
 =======
index 13081b3decefa834824b544182d0986e83bc50b4..a7d354ddda7baeb59760215cb41222e3b4698a8d 100644 (file)
@@ -48,7 +48,7 @@ void strp_pause(struct strparser *strp)
      Temporarily pause a stream parser. Message parsing is suspended
      and no new messages are delivered to the upper layer.
 
-void strp_pause(struct strparser *strp)
+void strp_unpause(struct strparser *strp)
 
      Unpause a paused stream parser.
 
index e73bcf9cb5f31cc756521702bbc15fd142e09c71..7ffea6aa22e3c89d4b6e6c7359d40a55c4241176 100644 (file)
@@ -1729,35 +1729,35 @@ If a variable isn't a key variable or prefixed with 'vals=', the
 associated event field will be saved in a variable but won't be summed
 as a value:
 
-  # echo 'hist:keys=next_pid:ts1=common_timestamp ... >> event/trigger
+  # echo 'hist:keys=next_pid:ts1=common_timestamp ...' >> event/trigger
 
 Multiple variables can be assigned at the same time.  The below would
 result in both ts0 and b being created as variables, with both
 common_timestamp and field1 additionally being summed as values:
 
-  # echo 'hist:keys=pid:vals=$ts0,$b:ts0=common_timestamp,b=field1 ... >> \
+  # echo 'hist:keys=pid:vals=$ts0,$b:ts0=common_timestamp,b=field1 ...' >> \
        event/trigger
 
 Note that variable assignments can appear either preceding or
 following their use.  The command below behaves identically to the
 command above:
 
-  # echo 'hist:keys=pid:ts0=common_timestamp,b=field1:vals=$ts0,$b ... >> \
+  # echo 'hist:keys=pid:ts0=common_timestamp,b=field1:vals=$ts0,$b ...' >> \
        event/trigger
 
 Any number of variables not bound to a 'vals=' prefix can also be
 assigned by simply separating them with colons.  Below is the same
 thing but without the values being summed in the histogram:
 
-  # echo 'hist:keys=pid:ts0=common_timestamp:b=field1 ... >> event/trigger
+  # echo 'hist:keys=pid:ts0=common_timestamp:b=field1 ...' >> event/trigger
 
 Variables set as above can be referenced and used in expressions on
 another event.
 
 For example, here's how a latency can be calculated:
 
-  # echo 'hist:keys=pid,prio:ts0=common_timestamp ... >> event1/trigger
-  # echo 'hist:keys=next_pid:wakeup_lat=common_timestamp-$ts0 ... >> event2/trigger
+  # echo 'hist:keys=pid,prio:ts0=common_timestamp ...' >> event1/trigger
+  # echo 'hist:keys=next_pid:wakeup_lat=common_timestamp-$ts0 ...' >> event2/trigger
 
 In the first line above, the event's timetamp is saved into the
 variable ts0.  In the next line, ts0 is subtracted from the second
@@ -1766,7 +1766,7 @@ yet another variable, 'wakeup_lat'.  The hist trigger below in turn
 makes use of the wakeup_lat variable to compute a combined latency
 using the same key and variable from yet another event:
 
-  # echo 'hist:key=pid:wakeupswitch_lat=$wakeup_lat+$switchtime_lat ... >> event3/trigger
+  # echo 'hist:key=pid:wakeupswitch_lat=$wakeup_lat+$switchtime_lat ...' >> event3/trigger
 
 2.2.2 Synthetic Events
 ----------------------
@@ -1807,10 +1807,11 @@ the command that defined it with a '!':
 At this point, there isn't yet an actual 'wakeup_latency' event
 instantiated in the event subsytem - for this to happen, a 'hist
 trigger action' needs to be instantiated and bound to actual fields
-and variables defined on other events (see Section 6.3.3 below).
+and variables defined on other events (see Section 2.2.3 below on
+how that is done using hist trigger 'onmatch' action). Once that is
+done, the 'wakeup_latency' synthetic event instance is created.
 
-Once that is done, an event instance is created, and a histogram can
-be defined using it:
+A histogram can now be defined for the new synthetic event:
 
   # echo 'hist:keys=pid,prio,lat.log2:sort=pid,lat' >> \
         /sys/kernel/debug/tracing/events/synthetic/wakeup_latency/trigger
@@ -1960,7 +1961,7 @@ hist trigger specification.
     back to that pid, the timestamp difference is calculated.  If the
     resulting latency, stored in wakeup_lat, exceeds the current
     maximum latency, the values specified in the save() fields are
-    recoreded:
+    recorded:
 
     # echo 'hist:keys=pid:ts0=common_timestamp.usecs \
             if comm=="cyclictest"' >> \
index 635e57493709e16fbecc0235723dc742a608ae0e..b8cb38a98c1989eef926795b79b7399d65700135 100644 (file)
@@ -226,7 +226,7 @@ $ rm configs/<config name>.<number>/<function>
 where <config name>.<number> specify the configuration and <function> is
 a symlink to a function being removed from the configuration, e.g.:
 
-$ rm configfs/c.1/ncm.usb0
+$ rm configs/c.1/ncm.usb0
 
 ...
 ...
index 495b7742ab58086b5c81fff88eeb884769391b49..d10944e619d3d28c43bcca85bc3dd2761cee37f0 100644 (file)
@@ -4610,7 +4610,7 @@ This capability indicates that kvm will implement the interfaces to handle
 reset, migration and nested KVM for branch prediction blocking. The stfle
 facility 82 should not be provided to the guest without this capability.
 
-8.14 KVM_CAP_HYPERV_TLBFLUSH
+8.18 KVM_CAP_HYPERV_TLBFLUSH
 
 Architectures: x86
 
index 9d5eeff51b5fd32979f64d288375b6489ff25712..07d1576fc766069866471028009a17bf4c281db0 100644 (file)
@@ -2971,9 +2971,13 @@ N:       bcm585*
 N:     bcm586*
 N:     bcm88312
 N:     hr2
-F:     arch/arm64/boot/dts/broadcom/ns2*
+N:     stingray
+F:     arch/arm64/boot/dts/broadcom/northstar2/*
+F:     arch/arm64/boot/dts/broadcom/stingray/*
 F:     drivers/clk/bcm/clk-ns*
+F:     drivers/clk/bcm/clk-sr*
 F:     drivers/pinctrl/bcm/pinctrl-ns*
+F:     include/dt-bindings/clock/bcm-sr*
 
 BROADCOM KONA GPIO DRIVER
 M:     Ray Jui <rjui@broadcom.com>
@@ -4360,12 +4364,7 @@ L:       iommu@lists.linux-foundation.org
 T:     git git://git.infradead.org/users/hch/dma-mapping.git
 W:     http://git.infradead.org/users/hch/dma-mapping.git
 S:     Supported
-F:     lib/dma-debug.c
-F:     lib/dma-direct.c
-F:     lib/dma-noncoherent.c
-F:     lib/dma-virt.c
-F:     drivers/base/dma-mapping.c
-F:     drivers/base/dma-coherent.c
+F:     kernel/dma/
 F:     include/asm-generic/dma-mapping.h
 F:     include/linux/dma-direct.h
 F:     include/linux/dma-mapping.h
@@ -5674,7 +5673,7 @@ F:        drivers/crypto/caam/
 F:     Documentation/devicetree/bindings/crypto/fsl-sec4.txt
 
 FREESCALE DIU FRAMEBUFFER DRIVER
-M:     Timur Tabi <timur@tabi.org>
+M:     Timur Tabi <timur@kernel.org>
 L:     linux-fbdev@vger.kernel.org
 S:     Maintained
 F:     drivers/video/fbdev/fsl-diu-fb.*
@@ -5774,7 +5773,7 @@ S:        Maintained
 F:     drivers/net/wan/fsl_ucc_hdlc*
 
 FREESCALE QUICC ENGINE UCC UART DRIVER
-M:     Timur Tabi <timur@tabi.org>
+M:     Timur Tabi <timur@kernel.org>
 L:     linuxppc-dev@lists.ozlabs.org
 S:     Maintained
 F:     drivers/tty/serial/ucc_uart.c
@@ -5798,7 +5797,7 @@ F:        drivers/net/ethernet/freescale/fs_enet/
 F:     include/linux/fs_enet_pd.h
 
 FREESCALE SOC SOUND DRIVERS
-M:     Timur Tabi <timur@tabi.org>
+M:     Timur Tabi <timur@kernel.org>
 M:     Nicolin Chen <nicoleotsuka@gmail.com>
 M:     Xiubo Li <Xiubo.Lee@gmail.com>
 R:     Fabio Estevam <fabio.estevam@nxp.com>
@@ -9756,6 +9755,11 @@ L:       linux-scsi@vger.kernel.org
 S:     Maintained
 F:     drivers/scsi/NCR_D700.*
 
+NCSI LIBRARY:
+M:     Samuel Mendoza-Jonas <sam@mendozajonas.com>
+S:     Maintained
+F:     net/ncsi/
+
 NCT6775 HARDWARE MONITOR DRIVER
 M:     Guenter Roeck <linux@roeck-us.net>
 L:     linux-hwmon@vger.kernel.org
@@ -9882,6 +9886,7 @@ M:        Andrew Lunn <andrew@lunn.ch>
 M:     Vivien Didelot <vivien.didelot@savoirfairelinux.com>
 M:     Florian Fainelli <f.fainelli@gmail.com>
 S:     Maintained
+F:     Documentation/devicetree/bindings/net/dsa/
 F:     net/dsa/
 F:     include/net/dsa.h
 F:     include/linux/dsa/
@@ -11476,6 +11481,15 @@ W:     http://wireless.kernel.org/en/users/Drivers/p54
 S:     Obsolete
 F:     drivers/net/wireless/intersil/prism54/
 
+PROC FILESYSTEM
+R:     Alexey Dobriyan <adobriyan@gmail.com>
+L:     linux-kernel@vger.kernel.org
+L:     linux-fsdevel@vger.kernel.org
+S:     Maintained
+F:     fs/proc/
+F:     include/linux/proc_fs.h
+F:     tools/testing/selftests/proc/
+
 PROC SYSCTL
 M:     "Luis R. Rodriguez" <mcgrof@kernel.org>
 M:     Kees Cook <keescook@chromium.org>
@@ -11808,9 +11822,9 @@ F:  Documentation/devicetree/bindings/opp/kryo-cpufreq.txt
 F:  drivers/cpufreq/qcom-cpufreq-kryo.c
 
 QUALCOMM EMAC GIGABIT ETHERNET DRIVER
-M:     Timur Tabi <timur@codeaurora.org>
+M:     Timur Tabi <timur@kernel.org>
 L:     netdev@vger.kernel.org
-S:     Supported
+S:     Maintained
 F:     drivers/net/ethernet/qualcomm/emac/
 
 QUALCOMM HEXAGON ARCHITECTURE
@@ -13648,7 +13662,7 @@ M:      Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
 L:     iommu@lists.linux-foundation.org
 T:     git git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb.git
 S:     Supported
-F:     lib/swiotlb.c
+F:     kernel/dma/swiotlb.c
 F:     arch/*/kernel/pci-swiotlb.c
 F:     include/linux/swiotlb.h
 
@@ -15572,9 +15586,17 @@ M:     x86@kernel.org
 L:     linux-kernel@vger.kernel.org
 T:     git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86/core
 S:     Maintained
+F:     Documentation/devicetree/bindings/x86/
 F:     Documentation/x86/
 F:     arch/x86/
 
+X86 ENTRY CODE
+M:     Andy Lutomirski <luto@kernel.org>
+L:     linux-kernel@vger.kernel.org
+T:     git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86/asm
+S:     Maintained
+F:     arch/x86/entry/
+
 X86 MCE INFRASTRUCTURE
 M:     Tony Luck <tony.luck@intel.com>
 M:     Borislav Petkov <bp@alien8.de>
@@ -15597,7 +15619,7 @@ F:      drivers/platform/x86/
 F:     drivers/platform/olpc/
 
 X86 VDSO
-M:     Andy Lutomirski <luto@amacapital.net>
+M:     Andy Lutomirski <luto@kernel.org>
 L:     linux-kernel@vger.kernel.org
 T:     git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86/vdso
 S:     Maintained
index ca2af1ab91ebadf6ac5c62150b4e72f2a1f1441d..c5ce55cbc543c9c676580381f2a1cf727e8e7cd7 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -2,7 +2,7 @@
 VERSION = 4
 PATCHLEVEL = 18
 SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc3
 NAME = Merciless Moray
 
 # *DOCUMENTATION*
index 0c4805a572c8739ff9d657c63961747e3ea08ff3..04a4a138ed131c7256aeb4108453400516b8965a 100644 (file)
@@ -555,11 +555,6 @@ config SMP
 
          If you don't know what to do here, say N.
 
-config HAVE_DEC_LOCK
-       bool
-       depends on SMP
-       default y
-
 config NR_CPUS
        int "Maximum number of CPUs (2-32)"
        range 2 32
index 04f9729de57c351c7e142b9aab9d9bca0878a2f3..854d5e79979e4ce929d7998bf1135a12880238f8 100644 (file)
@@ -35,8 +35,6 @@ lib-y =       __divqu.o __remqu.o __divlu.o __remlu.o \
        callback_srm.o srm_puts.o srm_printk.o \
        fls.o
 
-lib-$(CONFIG_SMP) += dec_and_lock.o
-
 # The division routines are built from single source, with different defines.
 AFLAGS___divqu.o = -DDIV
 AFLAGS___remqu.o =       -DREM
diff --git a/arch/alpha/lib/dec_and_lock.c b/arch/alpha/lib/dec_and_lock.c
deleted file mode 100644 (file)
index a117707..0000000
+++ /dev/null
@@ -1,44 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * arch/alpha/lib/dec_and_lock.c
- *
- * ll/sc version of atomic_dec_and_lock()
- * 
- */
-
-#include <linux/spinlock.h>
-#include <linux/atomic.h>
-#include <linux/export.h>
-
-  asm (".text                                  \n\
-       .global _atomic_dec_and_lock            \n\
-       .ent _atomic_dec_and_lock               \n\
-       .align  4                               \n\
-_atomic_dec_and_lock:                          \n\
-       .prologue 0                             \n\
-1:     ldl_l   $1, 0($16)                      \n\
-       subl    $1, 1, $1                       \n\
-       beq     $1, 2f                          \n\
-       stl_c   $1, 0($16)                      \n\
-       beq     $1, 4f                          \n\
-       mb                                      \n\
-       clr     $0                              \n\
-       ret                                     \n\
-2:     br      $29, 3f                         \n\
-3:     ldgp    $29, 0($29)                     \n\
-       br      $atomic_dec_and_lock_1..ng      \n\
-       .subsection 2                           \n\
-4:     br      1b                              \n\
-       .previous                               \n\
-       .end _atomic_dec_and_lock");
-
-static int __used atomic_dec_and_lock_1(atomic_t *atomic, spinlock_t *lock)
-{
-       /* Slow path */
-       spin_lock(lock);
-       if (atomic_dec_and_test(atomic))
-               return 1;
-       spin_unlock(lock);
-       return 0;
-}
-EXPORT_SYMBOL(_atomic_dec_and_lock);
index 54eeb8d00bc62a9f818aa9a833cbc15e7a1d9324..843edfd000be7210ebef62e529ba074df5ee242f 100644 (file)
@@ -1245,8 +1245,14 @@ config PCI
          VESA. If you have PCI, say Y, otherwise N.
 
 config PCI_DOMAINS
-       bool
+       bool "Support for multiple PCI domains"
        depends on PCI
+       help
+         Enable PCI domains kernel management. Say Y if your machine
+         has a PCI bus hierarchy that requires more than one PCI
+         domain (aka segment) to be correctly managed. Say N otherwise.
+
+         If you don't know what to do here, say N.
 
 config PCI_DOMAINS_GENERIC
        def_bool PCI_DOMAINS
index a10ef98c6d755d28c1ffba27739d5744df0405e8..ed4bab8be2f6b2549be7858bd184b562fd5e58a3 100644 (file)
@@ -73,6 +73,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
        bcm2835-rpi-b-rev2.dtb \
        bcm2835-rpi-b-plus.dtb \
        bcm2835-rpi-a-plus.dtb \
+       bcm2835-rpi-cm1-io1.dtb \
        bcm2836-rpi-2-b.dtb \
        bcm2837-rpi-3-b.dtb \
        bcm2837-rpi-3-b-plus.dtb \
@@ -860,6 +861,8 @@ dtb-$(CONFIG_ARCH_S3C64XX) += \
        s3c6410-smdk6410.dtb
 dtb-$(CONFIG_ARCH_S5PV210) += \
        s5pv210-aquila.dtb \
+       s5pv210-fascinate4g.dtb \
+       s5pv210-galaxys.dtb \
        s5pv210-goni.dtb \
        s5pv210-smdkc110.dtb \
        s5pv210-smdkv210.dtb \
@@ -1040,7 +1043,7 @@ dtb-$(CONFIG_ARCH_TANGO) += \
        tango4-vantage-1172.dtb
 dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \
        tegra20-harmony.dtb \
-       tegra20-iris-512.dtb \
+       tegra20-colibri-iris.dtb \
        tegra20-medcom-wide.dtb \
        tegra20-paz00.dtb \
        tegra20-plutux.dtb \
@@ -1139,6 +1142,7 @@ dtb-$(CONFIG_MACH_ARMADA_38X) += \
        armada-388-clearfog-pro.dtb \
        armada-388-db.dtb \
        armada-388-gp.dtb \
+       armada-388-helios4.dtb \
        armada-388-rd.dtb
 dtb-$(CONFIG_MACH_ARMADA_39X) += \
        armada-398-db.dtb
index ed7a5a3daa423cf6c935a2c25d56845949e0d9fd..8c6fc4161ad701d09e99612559a6b04a94ea6a83 100644 (file)
                compatible = "ti,wl1835";
                reg = <2>;
                interrupt-parent = <&gpio3>;
-               interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
+               interrupts = <7 IRQ_TYPE_EDGE_RISING>;
        };
 };
 
index 1356fd6f8da3f8d4b8643ab2686dc0c6181a4f52..c87d01297a013b60b8752594b13b89392ce95e7a 100644 (file)
                compatible = "ti,wl1835";
                reg = <2>;
                interrupt-parent = <&gpio3>;
-               interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
+               interrupts = <17 IRQ_TYPE_EDGE_RISING>;
        };
 };
 
index 0c096a795e3703651ec8127042610186a121f487..bf1a40e45c97b1b3a0cbbfa6ea583509f4e5bb8a 100644 (file)
                compatible = "ti,wl1271";
                reg = <2>;
                interrupt-parent = <&gpio0>;
-               interrupts = <31 IRQ_TYPE_LEVEL_HIGH>; /* gpio 31 */
+               interrupts = <31 IRQ_TYPE_EDGE_RISING>; /* gpio 31 */
                ref-clock-frequency = <38400000>;
        };
 };
index 1bcc60424ecd1eeb7134e7eb973dfc64f3bb9edf..38d57b89f7d39a504644714735b46080ef990daf 100644 (file)
@@ -8,6 +8,8 @@
 /dts-v1/;
 
 #include "am33xx.dtsi"
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 
 / {
        model = "Toby Churchill SL50 Series";
                pinctrl-0 = <&led_pins>;
 
                led0 {
-                       label = "sl50:green:usr0";
+                       label = "sl50:red:usr0";
                        gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
                        default-state = "off";
                };
 
                led1 {
-                       label = "sl50:red:usr1";
+                       label = "sl50:green:usr1";
                        gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
                        default-state = "off";
                };
 
                led2 {
-                       label = "sl50:green:usr2";
+                       label = "sl50:red:usr2";
                        gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
                        default-state = "off";
                };
 
                led3 {
-                       label = "sl50:red:usr3";
+                       label = "sl50:green:usr3";
                        gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
                        default-state = "off";
                };
 
        backlight0: disp0 {
                compatible = "pwm-backlight";
-               pwms = <&ehrpwm1 0 500000 0>;
-               brightness-levels = <0 10 20 30 40 50 60 70 80 90 99>;
-               default-brightness-level = <6>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&backlight0_pins>;
+               pwms = <&ehrpwm1 0 500000 PWM_POLARITY_INVERTED>;
+               brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+                                    10 11 12 13 14 15 16 17 18 19
+                                    20 21 22 23 24 25 26 27 28 29
+                                    30 31 32 33 34 35 36 37 38 39
+                                    40 41 42 43 44 45 46 47 48 49
+                                    50 51 52 53 54 55 56 57 58 59
+                                    60 61 62 63 64 65 66 67 68 69
+                                    70 71 72 73 74 75 76 77 78 79
+                                    80 81 82 83 84 85 86 87 88 89
+                                    90 91 92 93 94 95 96 97 98 99
+                                   100>;
+               default-brightness-level = <50>;
+               enable-gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
+               power-supply = <&vdd_sys_reg>;
        };
 
        backlight1: disp1 {
                compatible = "pwm-backlight";
-               pwms = <&ehrpwm1 1 500000 0>;
-               brightness-levels = <0 10 20 30 40 50 60 70 80 90 99>;
-               default-brightness-level = <6>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&backlight1_pins>;
+               pwms = <&ehrpwm1 1 500000 PWM_POLARITY_INVERTED>;
+               brightness-levels = < 0  1  2  3  4  5  6  7  8  9
+                                    10 11 12 13 14 15 16 17 18 19
+                                    20 21 22 23 24 25 26 27 28 29
+                                    30 31 32 33 34 35 36 37 38 39
+                                    40 41 42 43 44 45 46 47 48 49
+                                    50 51 52 53 54 55 56 57 58 59
+                                    60 61 62 63 64 65 66 67 68 69
+                                    70 71 72 73 74 75 76 77 78 79
+                                    80 81 82 83 84 85 86 87 88 89
+                                    90 91 92 93 94 95 96 97 98 99
+                                   100>;
+               default-brightness-level = <50>;
+               enable-gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+               power-supply = <&vdd_sys_reg>;
        };
 
        clocks {
                #size-cells = <0>;
 
                /* audio external oscillator */
-               tlv320aic3x_mclk: oscillator@0 {
+               audio_mclk_fixed: oscillator@0 {
                        compatible = "fixed-clock";
                        #clock-cells = <0>;
                        clock-frequency  = <24576000>;  /* 24.576MHz */
                };
+
+               audio_mclk: audio_mclk_gate@0 {
+                       compatible = "gpio-gate-clock";
+                       #clock-cells = <0>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&audio_mclk_pins>;
+                       clocks = <&audio_mclk_fixed>;
+                       enable-gpios = <&gpio1 27 0>;
+               };
+       };
+
+       panel: lcd_panel {
+               compatible = "ti,tilcdc,panel";
+               pinctrl-names = "default";
+               pinctrl-0 = <&lcd_pins>;
+
+               panel-info {
+                       ac-bias = <255>;
+                       ac-bias-intrpt = <0>;
+                       dma-burst-sz = <16>;
+                       bpp = <16>;
+                       fdd = <0x80>;
+                       tft-alt-mode = <0>;
+                       mono-8bit-mode = <0>;
+                       sync-edge = <0>;
+                       sync-ctrl = <1>;
+                       raster-order = <0>;
+                       fifo-th = <0>;
+               };
+
+               display-timings {
+                       native-mode = <&timing0>;
+                       timing0: 960x128 {
+                               clock-frequency = <18000000>;
+                               hactive = <960>;
+                               vactive = <272>;
+
+                               hback-porch = <40>;
+                               hfront-porch = <16>;
+                               hsync-len = <24>;
+                               hsync-active = <0>;
+
+                               vback-porch = <3>;
+                               vfront-porch = <8>;
+                               vsync-len = <4>;
+                               vsync-active = <0>;
+                       };
+               };
        };
 
        sound {
-               compatible = "ti,da830-evm-audio";
-               ti,model = "AM335x-SL50";
-               ti,audio-codec = <&audio_codec>;
-               ti,mcasp-controller = <&mcasp0>;
+               compatible = "audio-graph-card";
+               label = "sound-card";
+               pinctrl-names = "default";
+               pinctrl-0 = <&audio_pa_pins>;
+
+               widgets = "Headphone", "Headphone Jack",
+                         "Speaker", "Speaker External",
+                         "Line", "Line In",
+                         "Microphone", "Microphone Jack";
 
-               clocks = <&tlv320aic3x_mclk>;
-               clock-names = "mclk";
+               routing = "Headphone Jack",     "HPLOUT",
+                         "Headphone Jack",     "HPROUT",
+                         "Amplifier",          "MONO_LOUT",
+                         "Speaker External",   "Amplifier",
+                         "LINE1R",             "Line In",
+                         "LINE1L",             "Line In",
+                         "MIC3L",              "Microphone Jack",
+                         "MIC3R",              "Microphone Jack",
+                         "Microphone Jack",    "Mic Bias";
 
-               ti,audio-routing =
-                       "Headphone Jack",       "HPLOUT",
-                       "Headphone Jack",       "HPROUT",
-                       "LINE1R",               "Line In",
-                       "LINE1L",               "Line In";
+               dais = <&cpu_port>;
+
+               pa-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
        };
 
        emmc_pwrseq: pwrseq@0 {
                reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
        };
 
+       vdd_sys_reg: regulator@0 {
+               compatible = "regulator-fixed";
+               regulator-name = "vdd_sys_reg";
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               regulator-always-on;
+       };
+
        vmmcsd_fixed: fixedregulator0 {
                compatible = "regulator-fixed";
                regulator-name = "vmmcsd_fixed";
        pinctrl-names = "default";
        pinctrl-0 = <&lwb_pins>;
 
+       audio_pins: pinmux_audio_pins {
+               pinctrl-single,pins = <
+                       AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE0)     /* mcasp0_ahcklx.mcasp0_ahclkx */
+                       AM33XX_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE0)     /* mcasp0_fsx.mcasp0_fsx */
+                       AM33XX_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE0)     /* mcasp0_aclkx.mcasp0_aclkx */
+                       AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE0)     /* mcasp0_axr0.mcasp0_axr0 */
+                       AM33XX_IOPAD(0x99c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)    /* mcasp0_ahclkr.mcasp0_axr2 */
+               >;
+       };
+
+       audio_pa_pins: pinmux_audio_pa_pins {
+               pinctrl-single,pins = <
+                       AM33XX_IOPAD(0x9a0, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* SoundPA_en - mcasp0_aclkr.gpio3_18 */
+               >;
+       };
+
+       audio_mclk_pins: pinmux_audio_mclk_pins {
+               pinctrl-single,pins = <
+                       AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* gpmc_a11.gpio1_27 */
+               >;
+       };
+
+       backlight0_pins: pinmux_backlight0_pins {
+               pinctrl-single,pins = <
+                       AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE7)     /* gpmc_wen.gpio2_4 */
+               >;
+       };
+
+       backlight1_pins: pinmux_backlight1_pins {
+               pinctrl-single,pins = <
+                       AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE7)     /* gpmc_ad10.gpio0_26 */
+               >;
+       };
+
+       lcd_pins: pinmux_lcd_pins {
+               pinctrl-single,pins = <
+                       AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0)     /* lcd_data0.lcd_data0 */
+                       AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0)     /* lcd_data1.lcd_data1 */
+                       AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0)     /* lcd_data2.lcd_data2 */
+                       AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0)     /* lcd_data3.lcd_data3 */
+                       AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0)     /* lcd_data4.lcd_data4 */
+                       AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0)     /* lcd_data5.lcd_data5 */
+                       AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0)     /* lcd_data6.lcd_data6 */
+                       AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0)     /* lcd_data7.lcd_data7 */
+                       AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0)     /* lcd_data8.lcd_data8 */
+                       AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0)     /* lcd_data9.lcd_data9 */
+                       AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0)     /* lcd_data10.lcd_data10 */
+                       AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0)     /* lcd_data11.lcd_data11 */
+                       AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0)     /* lcd_data12.lcd_data12 */
+                       AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0)     /* lcd_data13.lcd_data13 */
+                       AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0)     /* lcd_data14.lcd_data14 */
+                       AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0)     /* lcd_data15.lcd_data15 */
+                       AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE0)    /* lcd_vsync.lcd_vsync */
+                       AM33XX_IOPAD(0x8e4, PIN_OUTPUT_PULLDOWN | MUX_MODE0)    /* lcd_hsync.lcd_hsync */
+                       AM33XX_IOPAD(0x8e8, PIN_OUTPUT_PULLDOWN | MUX_MODE0)    /* lcd_pclk.lcd_pclk */
+                       AM33XX_IOPAD(0x8ec, PIN_OUTPUT_PULLDOWN | MUX_MODE0)    /* lcd_ac_bias_en.lcd_ac_bias_en */
+               >;
+       };
+
        led_pins: pinmux_led_pins {
                pinctrl-single,pins = <
                        AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7)     /* gpmc_a5.gpio1_21 */
                        /* MDIO */
                        AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)       /* mdio_data.mdio_data */
                        AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0)                      /* mdio_clk.mdio_clk */
+                       /* Ethernet */
+                       AM33XX_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE7)       /* Ethernet_nRST - gpmc_ad14.gpio1_14 */
                >;
        };
 
                >;
        };
 
-       audio_pins: pinmux_audio_pins {
+       ehrpwm1_pins: pinmux_ehrpwm1a_pins {
                pinctrl-single,pins = <
-                       AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE0)     /* mcasp0_ahcklx.mcasp0_ahclkx */
-                       AM33XX_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE0)     /* mcasp0_fsx.mcasp0_fsx */
-                       AM33XX_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE0)     /* mcasp0_aclkx.mcasp0_aclkx */
-                       AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE0)     /* mcasp0_axr0.mcasp0_axr0 */
-                       AM33XX_IOPAD(0x99c, PIN_OUTPUT_PULLDOWN | MUX_MODE2)    /* mcasp0_ahclkr.mcasp0_axr2 */
+                       AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE6)     /* gpmc_a2.ehrpwm1a */
+                       AM33XX_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE6)     /* gpmc_a3.ehrpwm1b */
                >;
        };
 
-       ehrpwm1_pins: pinmux_ehrpwm1a_pins {
+       rtc0_irq_pins: pinmux_rtc0_irq_pins {
                pinctrl-single,pins = <
-                       AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE6)     /* gpmc_a2.ehrpwm1a */
-                       AM33XX_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE6)     /* gpmc_a3.ehrpwm1b */
+                       AM33XX_IOPAD(0x824, PIN_INPUT_PULLUP | MUX_MODE7)     /* gpmc_ad9.gpio0_23 */
                >;
        };
 
 
        lwb_pins: pinmux_lwb_pins {
                pinctrl-single,pins = <
-                       AM33XX_IOPAD(0x9a4, PIN_OUTPUT | MUX_MODE7)     /* SoundPA_en - mcasp0_fsr.gpio3_19 */
-                       AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE7)     /* nKbdOnC - gpmc_ad10.gpio0_26 */
                        AM33XX_IOPAD(0x830, PIN_INPUT_PULLUP | MUX_MODE7)       /* nKbdInt - gpmc_ad12.gpio1_12 */
                        AM33XX_IOPAD(0x834, PIN_INPUT_PULLUP | MUX_MODE7)       /* nKbdReset - gpmc_ad13.gpio1_13 */
-                       AM33XX_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE7)       /* nDispReset - gpmc_ad14.gpio1_14 */
                        AM33XX_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE7)       /* USB1_enPower - gpmc_a1.gpio1_17 */
                        /* PDI Bus - Battery system */
                        AM33XX_IOPAD(0x840, PIN_INPUT_PULLUP | MUX_MODE7)       /* nBattReset  gpmc_a0.gpio1_16 */
                        AM33XX_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE7)       /* BattPDIData gpmc_ad15.gpio1_15 */
+                       /* FPGA */
+                       AM33XX_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE7)       /* FPGA_DONE - gpmc_ad8.gpio0_22 */
+                       AM33XX_IOPAD(0x840, PIN_INPUT_PULLUP | MUX_MODE7)       /* FPGA_NRST - gpmc_a0.gpio1_16 */
+                       AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* FPGA_RUN - gpmc_a1.gpio1_17 */
+                       AM33XX_IOPAD(0x864, PIN_INPUT_PULLUP | MUX_MODE7)       /* ENFPGA - gpmc_a9.gpio1_25 */
+                       AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7)     /* FPGA_PROGRAM - gpmc_a10.gpio1_26 */
                >;
        };
 };
                reg = <0x24>;
        };
 
-       bq32000: rtc@68 {
-               compatible = "ti,bq32000";
-               trickle-resistor-ohms = <1120>;
+       rtc0: rtc@68 {
+               compatible = "dallas,ds1339";
+               pinctrl-names = "default";
+               pinctrl-0 = <&rtc0_irq_pins>;
+               interrupt-parent = <&gpio0>;
+               interrupts = <23 IRQ_TYPE_EDGE_FALLING>; /* gpio 23 */
+               wakeup-source;
+               trickle-resistor-ohms = <2000>;
                reg = <0x68>;
        };
 
        audio_codec: tlv320aic3106@1b {
                status = "okay";
                compatible = "ti,tlv320aic3106";
+               #sound-dai-cells = <0>;
                reg = <0x1b>;
+               ai3x-micbias-vg = <2>;  /* 2.5V */
 
                AVDD-supply = <&ldo4_reg>;
                IOVDD-supply = <&ldo4_reg>;
                DRVDD-supply = <&ldo4_reg>;
                DVDD-supply = <&ldo3_reg>;
+
+               codec_port: port {
+                       codec_endpoint: endpoint {
+                               remote-endpoint = <&cpu_endpoint>;
+                               clocks = <&audio_mclk>;
+                       };
+               };
        };
 
        /* Ambient Light Sensor */
 
 &usb0 {
        status = "okay";
-       dr_mode = "peripheral";
+       dr_mode = "otg";
 };
 
 &usb1 {
        status = "okay";
        pinctrl-names = "default";
        pinctrl-0 = <&audio_pins>;
-
+       #sound-dai-cells = <0>;
        op-mode = <0>;  /* MCASP_ISS_MODE */
        tdm-slots = <2>;
-       serial-dir = <
-               2 0 1 0
-               0 0 0 0
-               0 0 0 0
-               0 0 0 0
+       /* 4 serializers */
+       serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
+               0 0 1 2
        >;
-       tx-num-evt = <1>;
-       rx-num-evt = <1>;
+       tx-num-evt = <32>;
+       rx-num-evt = <32>;
+
+       cpu_port: port {
+               cpu_endpoint: endpoint {
+                       remote-endpoint = <&codec_endpoint>;
+
+                       dai-format = "dsp_b";
+                       bitclock-master = <&codec_port>;
+                       frame-master = <&codec_port>;
+                       bitclock-inversion;
+                       clocks = <&audio_mclk>;
+               };
+       };
 };
 
 &uart0 {
 };
 
 &cpsw_emac0 {
-       phy_id = <&davinci_mdio>, <0>;
-       phy-mode = "mii";
-};
-
-&cpsw_emac1 {
-       phy_id = <&davinci_mdio>, <1>;
        phy-mode = "mii";
+       phy-handle = <&ethphy0>;
 };
 
 &mac {
        pinctrl-names = "default", "sleep";
        pinctrl-0 = <&davinci_mdio_default>;
        pinctrl-1 = <&davinci_mdio_sleep>;
+       reset-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+       reset-delay-us = <100>;   /* PHY datasheet states 100us min */
+
+       ethphy0: ethernet-phy@0 {
+               reg = <0>;
+       };
 };
 
 &sham {
        pinctrl-names = "default";
        pinctrl-0 = <&ehrpwm1_pins>;
 };
+
+&lcdc {
+       status = "okay";
+};
+
+&tscadc {
+       status = "okay";
+};
+
+&am335x_adc {
+       ti,adc-channels = <0 1 2 3 4 5 6 7>;
+};
index 9cd62bc2ca352c54b49d5617e48005ee9ed0f4ce..d3dd6a16e70a706f214bf5ab54bdff396ed2c2bc 100644 (file)
@@ -29,8 +29,8 @@
                serial3 = &uart3;
                serial4 = &uart4;
                serial5 = &uart5;
-               d_can0 = &dcan0;
-               d_can1 = &dcan1;
+               d-can0 = &dcan0;
+               d-can1 = &dcan1;
                usb0 = &usb0;
                usb1 = &usb1;
                phy0 = &usb0_phy;
index 98aadb0f81c5e04153f0ac4ad4f5fdea1bd0bf2f..1d158cfda15f2653fe829aa4faf610f5a926f883 100644 (file)
                status = "okay";
                pinctrl-names = "default";
                enable-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;    /* gpio176, lcd INI */
+               vcc-supply = <&vdd_io_reg>;
 
                port {
                        lcd_in: endpoint {
        bl: backlight {
                compatible = "pwm-backlight";
                pinctrl-names = "default";
+               power-supply = <&vdd_io_reg>;
                pinctrl-0 = <&backlight_pins>;
                pwms = <&pwm11 0 5000000 0>;
                brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
                ti,timers = <&timer11>;
                #pwm-cells = <3>;
        };
+
+       /* HS USB Host PHY on PORT 1 */
+       hsusb1_phy: hsusb1_phy {
+               compatible = "usb-nop-xceiv";
+               reset-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; /* gpio_57 */
+               #phy-cells = <0>;
+       };
 };
 
 &davinci_emac {
                reg = <0x21>;
                gpio-controller;
                #gpio-cells = <2>;
+               vcc-supply = <&vdd_io_reg>;
        };
 };
 
        cd-gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpio_127 */
 };
 
-&mmc2 {
+&mmc3 {
       status = "disabled";
 };
 
-&mmc3 {
-      status = "disabled";
+&usbhshost {
+       port1-mode = "ehci-phy";
+};
+
+&usbhsehci {
+       phys = <&hsusb1_phy>;
 };
 
 &omap3_pmx_core {
+       pinctrl-names = "default";
+       pinctrl-0 = <&hsusb1_rst_pins>;
 
        leds_pins: pinmux_leds_pins {
                pinctrl-single,pins = <
                        OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0)       /* dss_data15.dss_data15 */
                >;
        };
+
+       hsusb1_rst_pins: pinmux_hsusb1_rst_pins {
+               pinctrl-single,pins = <
+                       OMAP3_CORE1_IOPAD(0x20ba, PIN_OUTPUT | MUX_MODE4)       /* gpmc_ncs6.gpio_57 */
+               >;
+       };
+};
+
+&omap3_pmx_core2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&hsusb1_pins>;
+
+       hsusb1_pins: pinmux_hsusb1_pins {
+               pinctrl-single,pins = <
+                       OMAP3430_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3)    /* etk_clk.hsusb1_stp */
+                       OMAP3430_CORE2_IOPAD(0x25da, PIN_OUTPUT | MUX_MODE3)    /* etk_ctl.hsusb1_clk */
+                       OMAP3430_CORE2_IOPAD(0x25ec, PIN_INPUT | MUX_MODE3)     /* etk_d8.hsusb1_dir */
+                       OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE3)     /* etk_d9.hsusb1_nxt */
+                       OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE3)     /* etk_d0.hsusb1_data0 */
+                       OMAP3430_CORE2_IOPAD(0x25de, PIN_INPUT | MUX_MODE3)     /* etk_d1.hsusb1_data1 */
+                       OMAP3430_CORE2_IOPAD(0x25e0, PIN_INPUT | MUX_MODE3)     /* etk_d2.hsusb1_data2 */
+                       OMAP3430_CORE2_IOPAD(0x25ea, PIN_INPUT | MUX_MODE3)     /* etk_d7.hsusb1_data3 */
+                       OMAP3430_CORE2_IOPAD(0x25e4, PIN_INPUT | MUX_MODE3)     /* etk_d4.hsusb1_data4 */
+                       OMAP3430_CORE2_IOPAD(0x25e6, PIN_INPUT | MUX_MODE3)     /* etk_d5.hsusb1_data5 */
+                       OMAP3430_CORE2_IOPAD(0x25e8, PIN_INPUT | MUX_MODE3)     /* etk_d6.hsusb1_data6 */
+                       OMAP3430_CORE2_IOPAD(0x25e2, PIN_INPUT | MUX_MODE3)     /* etk_d3.hsusb1_data7 */
+               >;
+       };
 };
index a6d5ff73c163074b03f21ea77aed21103f84d096..dae6e458e59fe7e4b49c65c78ed5224169a4407c 100644 (file)
                        cpu0-supply = <&vdd_core_reg>;
                };
        };
+
+       wl12xx_buffer: wl12xx_buf {
+               compatible = "regulator-fixed";
+               regulator-name = "wl1271_buf";
+               regulator-min-microvolt = <1800000>;
+               regulator-max-microvolt = <1800000>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&wl12xx_buffer_pins>;
+               gpio = <&gpio5 1 GPIO_ACTIVE_LOW>; /* gpio 129 */
+               regulator-always-on;
+               vin-supply = <&vdd_1v8_reg>;
+       };
+
+       wl12xx_vmmc2: wl12xx_vmmc2 {
+               compatible = "regulator-fixed";
+               regulator-name = "vwl1271";
+               regulator-min-microvolt = <1800000>;
+               regulator-max-microvolt = <1800000>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&wl12xx_wkup_pins>;
+               gpio = <&gpio1 3 GPIO_ACTIVE_HIGH >; /* gpio 3 */
+               startup-delay-us = <70000>;
+               enable-active-high;
+               regulator-always-on;
+               vin-supply = <&wl12xx_buffer>;
+       };
 };
 
 &gpmc {
@@ -64,7 +90,6 @@
                regulators {
                        vdd_core_reg: VDCDC1 {
                                regulator-name = "vdd_core";
-                               compatible = "regulator-fixed";
                                regulator-always-on;
                                regulator-min-microvolt = <1200000>;
                                regulator-max-microvolt = <1200000>;
@@ -72,7 +97,6 @@
 
                        vdd_io_reg: VDCDC2 {
                                regulator-name = "vdd_io";
-                               compatible = "regulator-fixed";
                                regulator-always-on;
                                regulator-min-microvolt = <3300000>;
                                regulator-max-microvolt = <3300000>;
 
                        vdd_1v8_reg: VDCDC3 {
                                regulator-name = "vdd_1v8";
-                               compatible = "regulator-fixed";
                                regulator-always-on;
                                regulator-min-microvolt = <1800000>;
                                regulator-max-microvolt = <1800000>;
 
                        vdd_usb18_reg: LDO1 {
                                regulator-name = "vdd_usb18";
-                               compatible = "regulator-fixed";
                                regulator-always-on;
                                regulator-min-microvolt = <1800000>;
                                regulator-max-microvolt = <1800000>;
 
                        vdd_usb33_reg: LDO2 {
                                regulator-name = "vdd_usb33";
-                               compatible = "regulator-fixed";
                                regulator-always-on;
                                regulator-min-microvolt = <3300000>;
                                regulator-max-microvolt = <3300000>;
        };
 };
 
+&mmc2 {
+       interrupts-extended = <&intc 86 /* &omap3_pmx_core 0x12c */>;
+
+       status = "okay";
+       pinctrl-names = "default";
+       pinctrl-0 = <&mmc2_pins>;
+       vmmc-supply = <&wl12xx_vmmc2>;
+       non-removable;
+       bus-width = <4>;
+       cap-power-off-card;
+       #address-cells = <1>;
+       #size-cells = <0>;
+       wlcore: wlcore@2 {
+               compatible = "ti,wl1271";
+               reg = <2>;
+               interrupt-parent = <&gpio6>;
+               interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; /* gpio_170 */
+               ref-clock-frequency = <26000000>;
+               tcxo-clock-frequency = <26000000>;
+       };
+};
+
+&uart2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart2_pins>;
+
+       bluetooth {
+               compatible = "ti,wl1271-st";
+               enable-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>; /* gpio 56 */
+               max-speed = <3000000>;
+       };
+};
+
 &omap3_pmx_core {
 
+       wl12xx_buffer_pins: pinmux_wl12xx_buffer_pins {
+               pinctrl-single,pins = <
+                       OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4)  /* mmc1_dat7.gpio_129 */
+               >;
+       };
+
+       mmc2_pins: pinmux_mmc2_pins {
+               pinctrl-single,pins = <
+                       OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc2_clk.mmc2_clk */
+                       OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc2_cmd.mmc2_cmd */
+                       OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc2_dat0.mmc2_dat0 */
+                       OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc2_dat1.mmc2_dat1 */
+                       OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc2_dat2.mmc2_dat2 */
+                       OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0)  /* mmc2_dat3.mmc2_dat3 */
+                       OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT | MUX_MODE1) /* mmc2_dat4.mmc2_dir_dat0 */
+                       OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE1) /* mmc2_dat5.mmc2_dir_dat1 */
+                       OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE1) /* mmc2_dat6.mmc2_dir_cmd */
+                       OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE1) /* mmc2_dat7.mmc2_clkin */
+                       OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE4) /* hdq_sio.gpio_170 */
+               >;
+       };
+
        rtc_pins: pinmux_rtc_pins {
                pinctrl-single,pins = <
                        OMAP3_CORE1_IOPAD(0x20b6, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_ncs4.gpio_55 */
                        OMAP3_CORE1_IOPAD(0x20d2, PIN_INPUT | MUX_MODE4) /* gpmc_wait3.gpio_65 */
                >;
        };
+
+       uart2_pins: pinmux_uart2_pins {
+               pinctrl-single,pins = <
+                       OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0)         /* uart2_cts */
+                       OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT_PULLUP | MUX_MODE0)        /* uart2_rts */
+                       OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0)               /* uart2_tx */
+                       OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0)                /* uart2_rx */
+                       OMAP3_CORE1_IOPAD(0x20b8, PIN_INPUT | MUX_MODE0)                /* gpio_56 */
+               >;
+       };
+};
+
+&omap3_pmx_wkup {
+
+       wl12xx_wkup_pins: pinmux_wl12xx_wkup_pins {
+               pinctrl-single,pins = <
+                       OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4)        /* sys_boot1.gpio_3 */
+               >;
+       };
 };
index 60414b1ca4044f38d71877d61cf0da8e34d54db9..5b97c20c5ed49c2de9432742442a322e4e127728 100644 (file)
                compatible = "ti,wl1835";
                reg = <2>;
                interrupt-parent = <&gpio1>;
-               interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
+               interrupts = <23 IRQ_TYPE_EDGE_RISING>;
        };
 };
 
index 5bb9d68d6e90a411b117c3a9b736f281dad6fdbc..d9a2049a1ea8ad49163c8028d85ab9af45a0af0b 100644 (file)
        };
 };
 
-&omap_dwc3_2 {
-       extcon = <&extcon_usb2>;
-};
-
 &extcon_usb2 {
        id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
        vbus-gpio = <&gpio7 22 GPIO_ACTIVE_HIGH>;
index c6d858b310117ea6ea54b1393aaf6d4600f132ba..784639ddf4513a316971ec181b3a1ade74fe18f1 100644 (file)
        };
 };
 
-&omap_dwc3_2 {
-       extcon = <&extcon_usb2>;
-};
-
 &extcon_usb2 {
        id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
        vbus-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>;
index ad87f1ae904db15c313678c5b59c68bb78fdb733..c9063ffca524c8022f97930964d7b03f4de38c4c 100644 (file)
        dr_mode = "host";
 };
 
+&omap_dwc3_2 {
+       extcon = <&extcon_usb2>;
+};
+
 &usb2 {
-       dr_mode = "peripheral";
+       extcon = <&extcon_usb2>;
+       dr_mode = "otg";
 };
 
 &mmc1 {
index 6782ce481ac967ded05bbfc124355aa894790d6f..d8769956cbfcff7b4a38e72959ba8b88f397a1c0 100644 (file)
                                              3700 5
                                              3900 6
                                              4000 7>;
-                       cooling-cells = <2>;
+                       #cooling-cells = <2>;
                };
 
                gpio-leds {
index 50ed4ae5c621af84fd5b0bccf12fcebba2384890..53b4bd35522ad92a2456fe3196cc8778b2afe1a7 100644 (file)
@@ -3,11 +3,6 @@
  * Device Tree file for SolidRun Clearfog Base revision A1 rev 2.0 (88F6828)
  *
  *  Copyright (C) 2015 Russell King
- *
- * This board is in development; the contents of this file work with
- * the A1 rev 2.0 of the board, which does not represent final
- * production board.  Things will change, don't expect this file to
- * remain compatible info the future.
  */
 
 /dts-v1/;
index 24e4b5a509be9b9178d64ebf45124a0401f1c37b..ff890c09c3ede1f0b50583eb1833d348325ecd23 100644 (file)
@@ -3,11 +3,6 @@
  * Device Tree file for SolidRun Clearfog Pro revision A1 rev 2.0 (88F6828)
  *
  *  Copyright (C) 2015 Russell King
- *
- * This board is in development; the contents of this file work with
- * the A1 rev 2.0 of the board, which does not represent final
- * production board.  Things will change, don't expect this file to
- * remain compatible info the future.
  */
 #include "armada-388-clearfog.dts"
 
index 5fd0f6f61e77679c45889fdc7316998fe5e19bd3..89a354b43978fab38a9535c3ee958035c5ba9e3f 100644 (file)