James Bottomley <jejb@mulgrave.(none)>
James Bottomley <jejb@titanic.il.steeleye.com>
James E Wilson <wilson@specifix.com>
+James Hogan <jhogan@kernel.org> <james.hogan@imgtec.com>
+James Hogan <jhogan@kernel.org> <james@albanarts.com>
James Ketrenos <jketreno@io.(none)>
Javi Merino <javi.merino@kernel.org> <javi.merino@arm.com>
<javier@osg.samsung.com> <javier.martinez@collabora.co.uk>
Show or set the gain boost of the amp, from 0-31 range.
18 = indoors (default)
14 = outdoors
+
+What /sys/bus/iio/devices/iio:deviceX/noise_level_tripped
+Date: May 2017
+KernelVersion: 4.13
+Contact: Matt Ranostay <matt.ranostay@konsulko.com>
+Description:
+ When 1 the noise level is over the trip level and not reporting
+ valid data
still used for tmpfs etc. other users. If set to
false, the global swap readahead algorithm will be
used for all swappable pages.
-
-What: /sys/kernel/mm/swap/vma_ra_max_order
-Date: August 2017
-Contact: Linux memory management mailing list <linux-mm@kvack.org>
-Description: The max readahead size in order for VMA based swap readahead
-
- VMA based swap readahead algorithm will readahead at
- most 1 << max_order pages for each readahead. The
- real readahead size for each readahead will be scaled
- according to the estimation algorithm.
What; /sys/power/pm_trace_dev_match
Date: October 2010
-Contact: James Hogan <james@albanarts.com>
+Contact: James Hogan <jhogan@kernel.org>
Description:
The /sys/power/pm_trace_dev_match file contains the name of the
device associated with the last PM event point saved in the RTC
----------------------
.. kernel-doc:: include/linux/rcupdate.h
- :external:
.. kernel-doc:: include/linux/rcupdate_wait.h
- :external:
.. kernel-doc:: include/linux/rcutree.h
- :external:
.. kernel-doc:: kernel/rcu/tree.c
- :external:
.. kernel-doc:: kernel/rcu/tree_plugin.h
- :external:
.. kernel-doc:: kernel/rcu/tree_exp.h
- :external:
.. kernel-doc:: kernel/rcu/update.c
- :external:
.. kernel-doc:: include/linux/srcu.h
- :external:
.. kernel-doc:: kernel/rcu/srcutree.c
- :external:
.. kernel-doc:: include/linux/rculist_bl.h
- :external:
.. kernel-doc:: include/linux/rculist.h
- :external:
.. kernel-doc:: include/linux/rculist_nulls.h
- :external:
.. kernel-doc:: include/linux/rcu_sync.h
- :external:
.. kernel-doc:: kernel/rcu/sync.c
- :external:
Although MT wq wasted a lot of resource, the level of concurrency
provided was unsatisfactory. The limitation was common to both ST and
MT wq albeit less severe on MT. Each wq maintained its own separate
-worker pool. A MT wq could provide only one execution context per CPU
-while a ST wq one for the whole system. Work items had to compete for
+worker pool. An MT wq could provide only one execution context per CPU
+while an ST wq one for the whole system. Work items had to compete for
those very limited execution contexts leading to various problems
including proneness to deadlocks around the single execution context.
``alloc_workqueue()`` allocates a wq. The original
``create_*workqueue()`` functions are deprecated and scheduled for
-removal. ``alloc_workqueue()`` takes three arguments - @``name``,
+removal. ``alloc_workqueue()`` takes three arguments - ``@name``,
``@flags`` and ``@max_active``. ``@name`` is the name of the wq and
also used as the name of the rescuer thread if there is one.
served by worker threads with elevated nice level.
Note that normal and highpri worker-pools don't interact with
- each other. Each maintain its separate pool of workers and
+ each other. Each maintains its separate pool of workers and
implements concurrency management among its workers.
``WQ_CPU_INTENSIVE``
time thus achieving the same ordering property as ST wq.
In the current implementation the above configuration only guarantees
-ST behavior within a given NUMA node. Instead alloc_ordered_queue should
-be used to achieve system wide ST behavior.
+ST behavior within a given NUMA node. Instead ``alloc_ordered_queue()`` should
+be used to achieve system-wide ST behavior.
Example Execution Scenarios
(wrong raid10_copies/raid10_format sequence)
1.11.1 Add raid4/5/6 journal write-back support via journal_mode option
1.12.1 fix for MD deadlock between mddev_suspend() and md_write_start() available
+1.13.0 Fix dev_health status at end of "recover" (was 'a', now 'A')
- ams,tuning-capacitor-pf: Calibration tuning capacitor stepping
value 0 - 120pF. This will require using the calibration data from
the manufacturer.
+ - ams,nflwdth: Set the noise and watchdog threshold register on
+ startup. This will need to set according to the noise from the
+ MCU board, and possibly the local environment. Refer to the
+ datasheet for the threshold settings.
Example:
interrupt-parent = <&gpio1>;
interrupts = <16 1>;
ams,tuning-capacitor-pf = <80>;
+ ams,nflwdth = <0x44>;
};
compatible = "arm,gic-v3-its";
msi-controller;
#msi-cells = <1>;
- reg = <0x0 0x2c200000 0 0x200000>;
+ reg = <0x0 0x2c200000 0 0x20000>;
};
};
compatible = "arm,gic-v3-its";
msi-controller;
#msi-cells = <1>;
- reg = <0x0 0x2c200000 0 0x200000>;
+ reg = <0x0 0x2c200000 0 0x20000>;
};
gic-its@2c400000 {
compatible = "arm,gic-v3-its";
msi-controller;
#msi-cells = <1>;
- reg = <0x0 0x2c400000 0 0x200000>;
+ reg = <0x0 0x2c400000 0 0x20000>;
};
ppi-partitions {
- clocks:
Array of clocks required for SDHC.
- Require at least input clock for Xenon IP core.
+ Require at least input clock for Xenon IP core. For Armada AP806 and
+ CP110, the AXI clock is also mandatory.
- clock-names:
Array of names corresponding to clocks property.
The input clock for Xenon IP core should be named as "core".
+ The input clock for the AXI bus must be named as "axi".
- reg:
* For "marvell,armada-3700-sdhci", two register areas.
compatible = "marvell,armada-ap806-sdhci";
reg = <0xaa0000 0x1000>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>
- clocks = <&emmc_clk>;
- clock-names = "core";
+ clocks = <&emmc_clk>,<&axi_clk>;
+ clock-names = "core", "axi";
bus-width = <4>;
marvell,xenon-phy-slow-mode;
marvell,xenon-tun-count = <11>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>
vqmmc-supply = <&sd_vqmmc_regulator>;
vmmc-supply = <&sd_vmmc_regulator>;
- clocks = <&sdclk>;
- clock-names = "core";
+ clocks = <&sdclk>, <&axi_clk>;
+ clock-names = "core", "axi";
bus-width = <4>;
marvell,xenon-tun-count = <9>;
};
- main controller clock (for both armada-375-pp2 and armada-7k-pp2)
- GOP clock (for both armada-375-pp2 and armada-7k-pp2)
- MG clock (only for armada-7k-pp2)
-- clock-names: names of used clocks, must be "pp_clk", "gop_clk" and
- "mg_clk" (the latter only for armada-7k-pp2).
+ - AXI clock (only for armada-7k-pp2)
+- clock-names: names of used clocks, must be "pp_clk", "gop_clk", "mg_clk"
+ and "axi_clk" (the 2 latter only for armada-7k-pp2).
The ethernet ports are represented by subnodes. At least one port is
required.
cpm_ethernet: ethernet@0 {
compatible = "marvell,armada-7k-pp22";
reg = <0x0 0x100000>, <0x129000 0xb000>;
- clocks = <&cpm_syscon0 1 3>, <&cpm_syscon0 1 9>, <&cpm_syscon0 1 5>;
- clock-names = "pp_clk", "gop_clk", "gp_clk";
+ clocks = <&cpm_syscon0 1 3>, <&cpm_syscon0 1 9>,
+ <&cpm_syscon0 1 5>, <&cpm_syscon0 1 18>;
+ clock-names = "pp_clk", "gop_clk", "gp_clk", "axi_clk";
eth0: eth0 {
interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>,
Required properties:
- compatible: should be "rockchip,<name>-gamc"
+ "rockchip,rk3128-gmac": found on RK312x SoCs
"rockchip,rk3228-gmac": found on RK322x SoCs
"rockchip,rk3288-gmac": found on RK3288 SoCs
"rockchip,rk3328-gmac": found on RK3328 SoCs
--- /dev/null
+Binding for the Synopsys HSDK reset controller
+
+This binding uses the common reset binding[1].
+
+[1] Documentation/devicetree/bindings/reset/reset.txt
+
+Required properties:
+- compatible: should be "snps,hsdk-reset".
+- reg: should always contain 2 pairs address - length: first for reset
+ configuration register and second for corresponding SW reset and status bits
+ register.
+- #reset-cells: from common reset binding; Should always be set to 1.
+
+Example:
+ reset: reset@880 {
+ compatible = "snps,hsdk-reset";
+ #reset-cells = <1>;
+ reg = <0x8A0 0x4>, <0xFF0 0x4>;
+ };
+
+Specifying reset lines connected to IP modules:
+ ethernet@.... {
+ ....
+ resets = <&reset HSDK_V1_ETH_RESET>;
+ ....
+ };
+
+The index could be found in <dt-bindings/reset/snps,hsdk-reset.h>
- "renesas,hscif-r8a7795" for R8A7795 (R-Car H3) HSCIF compatible UART.
- "renesas,scif-r8a7796" for R8A7796 (R-Car M3-W) SCIF compatible UART.
- "renesas,hscif-r8a7796" for R8A7796 (R-Car M3-W) HSCIF compatible UART.
+ - "renesas,scif-r8a77970" for R8A77970 (R-Car V3M) SCIF compatible UART.
+ - "renesas,hscif-r8a77970" for R8A77970 (R-Car V3M) HSCIF compatible UART.
- "renesas,scif-r8a77995" for R8A77995 (R-Car D3) SCIF compatible UART.
- "renesas,hscif-r8a77995" for R8A77995 (R-Car D3) HSCIF compatible UART.
- "renesas,scifa-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFA compatible UART.
};
Device drivers can export attributes via their sysfs directories.
-Drivers can declare attributes using a DRIVER_ATTR macro that works
-identically to the DEVICE_ATTR macro.
+Drivers can declare attributes using a DRIVER_ATTR_RW and DRIVER_ATTR_RO
+macro that works identically to the DEVICE_ATTR_RW and DEVICE_ATTR_RO
+macros.
Example:
-DRIVER_ATTR(debug,0644,show_debug,store_debug);
+DRIVER_ATTR_RW(debug);
This is equivalent to declaring:
beneath or above the path of another overlay lower layer path.
Using an upper layer path and/or a workdir path that are already used by
-another overlay mount is not allowed and will fail with EBUSY. Using
+another overlay mount is not allowed and may fail with EBUSY. Using
partially overlapping paths is not allowed but will not fail with EBUSY.
+If files are accessed from two overlayfs mounts which share or overlap the
+upper layer and/or workdir path the behavior of the overlay is undefined,
+though it will not result in a crash or deadlock.
Mounting an overlay using an upper layer path, where the upper layer path
was previously used by another mounted overlay in combination with a
Declaring:
-DRIVER_ATTR(_name, _mode, _show, _store)
+DRIVER_ATTR_RO(_name)
+DRIVER_ATTR_RW(_name)
Creation/Removal:
* Intel Gemini Lake (SOC)
* Intel Cannon Lake-H (PCH)
* Intel Cannon Lake-LP (PCH)
+ * Intel Cedar Fork (PCH)
Datasheets: Publicly available at the Intel website
On Intel Patsburg and later chipsets, both the normal host SMBus controller
ld
Link target. Often, LDFLAGS_$@ is used to set specific options to ld.
- objcopy
- Copy binary. Uses OBJCOPYFLAGS usually specified in
- arch/$(ARCH)/Makefile.
- OBJCOPYFLAGS_$@ may be used to set additional options.
-
- gzip
- Compress target. Use maximum compression to compress target.
-
Example:
#arch/x86/boot/Makefile
LDFLAGS_bootsect := -Ttext 0x0 -s --oformat binary
resulting in the target file being recompiled for no
obvious reason.
+ objcopy
+ Copy binary. Uses OBJCOPYFLAGS usually specified in
+ arch/$(ARCH)/Makefile.
+ OBJCOPYFLAGS_$@ may be used to set additional options.
+
+ gzip
+ Compress target. Use maximum compression to compress target.
+
+ Example:
+ #arch/x86/boot/compressed/Makefile
+ $(obj)/vmlinux.bin.gz: $(vmlinux.bin.all-y) FORCE
+ $(call if_changed,gzip)
+
dtc
Create flattened device tree blob object suitable for linking
into vmlinux. Device tree blobs linked into vmlinux are placed
that may be shared between individual architectures.
The recommended approach how to use a generic header file is
to list the file in the Kbuild file.
- See "7.3 generic-y" for further info on syntax etc.
+ See "7.2 generic-y" for further info on syntax etc.
--- 6.11 Post-link pass
arch/<arch>/include/asm/ to list asm files coming from asm-generic.
See subsequent chapter for the syntax of the Kbuild file.
- --- 7.1 no-export-headers
+--- 7.1 no-export-headers
no-export-headers is essentially used by include/uapi/linux/Kbuild to
avoid exporting specific headers (e.g. kvm.h) on architectures that do
not support it. It should be avoided as much as possible.
- --- 7.2 generic-y
+--- 7.2 generic-y
If an architecture uses a verbatim copy of a header from
include/asm-generic then this is listed in the file
Example: termios.h
#include <asm-generic/termios.h>
- --- 7.3 generated-y
+--- 7.3 generated-y
If an architecture generates other header files alongside generic-y
wrappers, generated-y specifies them.
#arch/x86/include/asm/Kbuild
generated-y += syscalls_32.h
- --- 7.5 mandatory-y
+--- 7.4 mandatory-y
mandatory-y is essentially used by include/uapi/asm-generic/Kbuild.asm
to define the minimum set of headers that must be exported in
and packet type ID), so in a "gatewayed" configuration, all
outgoing traffic will generally use the same device. Incoming
traffic may also end up on a single device, but that is
- dependent upon the balancing policy of the peer's 8023.ad
+ dependent upon the balancing policy of the peer's 802.3ad
implementation. In a "local" configuration, traffic will be
distributed across the devices in the bond.
submitting-patches
coding-style
email-clients
+ kernel-enforcement-statement
Other guides to the community that are of interest to most developers are:
--- /dev/null
+Linux Kernel Enforcement Statement
+----------------------------------
+
+As developers of the Linux kernel, we have a keen interest in how our software
+is used and how the license for our software is enforced. Compliance with the
+reciprocal sharing obligations of GPL-2.0 is critical to the long-term
+sustainability of our software and community.
+
+Although there is a right to enforce the separate copyright interests in the
+contributions made to our community, we share an interest in ensuring that
+individual enforcement actions are conducted in a manner that benefits our
+community and do not have an unintended negative impact on the health and
+growth of our software ecosystem. In order to deter unhelpful enforcement
+actions, we agree that it is in the best interests of our development
+community to undertake the following commitment to users of the Linux kernel
+on behalf of ourselves and any successors to our copyright interests:
+
+ Notwithstanding the termination provisions of the GPL-2.0, we agree that
+ it is in the best interests of our development community to adopt the
+ following provisions of GPL-3.0 as additional permissions under our
+ license with respect to any non-defensive assertion of rights under the
+ license.
+
+ However, if you cease all violation of this License, then your license
+ from a particular copyright holder is reinstated (a) provisionally,
+ unless and until the copyright holder explicitly and finally
+ terminates your license, and (b) permanently, if the copyright holder
+ fails to notify you of the violation by some reasonable means prior to
+ 60 days after the cessation.
+
+ Moreover, your license from a particular copyright holder is
+ reinstated permanently if the copyright holder notifies you of the
+ violation by some reasonable means, this is the first time you have
+ received notice of violation of this License (for any work) from that
+ copyright holder, and you cure the violation prior to 30 days after
+ your receipt of the notice.
+
+Our intent in providing these assurances is to encourage more use of the
+software. We want companies and individuals to use, modify and distribute
+this software. We want to work with users in an open and transparent way to
+eliminate any uncertainty about our expectations regarding compliance or
+enforcement that might limit adoption of our software. We view legal action
+as a last resort, to be initiated only when other community efforts have
+failed to resolve the problem.
+
+Finally, once a non-compliance issue is resolved, we hope the user will feel
+welcome to join us in our efforts on this project. Working together, we will
+be stronger.
+
+Except where noted below, we speak only for ourselves, and not for any company
+we might work for today, have in the past, or will in the future.
+
+ - Bjorn Andersson (Linaro)
+ - Andrea Arcangeli (Red Hat)
+ - Neil Armstrong
+ - Jens Axboe
+ - Pablo Neira Ayuso
+ - Khalid Aziz
+ - Ralf Baechle
+ - Felipe Balbi
+ - Arnd Bergmann
+ - Ard Biesheuvel
+ - Paolo Bonzini (Red Hat)
+ - Christian Borntraeger
+ - Mark Brown (Linaro)
+ - Paul Burton
+ - Javier Martinez Canillas
+ - Rob Clark
+ - Jonathan Corbet
+ - Vivien Didelot (Savoir-faire Linux)
+ - Hans de Goede (Red Hat)
+ - Mel Gorman (SUSE)
+ - Sven Eckelmann
+ - Alex Elder (Linaro)
+ - Fabio Estevam
+ - Larry Finger
+ - Bhumika Goyal
+ - Andy Gross
+ - Juergen Gross
+ - Shawn Guo
+ - Ulf Hansson
+ - Tejun Heo
+ - Rob Herring
+ - Masami Hiramatsu
+ - Michal Hocko
+ - Simon Horman
+ - Johan Hovold (Hovold Consulting AB)
+ - Christophe JAILLET
+ - Olof Johansson
+ - Lee Jones (Linaro)
+ - Heiner Kallweit
+ - Srinivas Kandagatla
+ - Jan Kara
+ - Shuah Khan (Samsung)
+ - David Kershner
+ - Jaegeuk Kim
+ - Namhyung Kim
+ - Colin Ian King
+ - Jeff Kirsher
+ - Greg Kroah-Hartman (Linux Foundation)
+ - Christian König
+ - Vinod Koul
+ - Krzysztof Kozlowski
+ - Viresh Kumar
+ - Aneesh Kumar K.V
+ - Julia Lawall
+ - Doug Ledford (Red Hat)
+ - Chuck Lever (Oracle)
+ - Daniel Lezcano
+ - Shaohua Li
+ - Xin Long (Red Hat)
+ - Tony Luck
+ - Mike Marshall
+ - Chris Mason
+ - Paul E. McKenney
+ - David S. Miller
+ - Ingo Molnar
+ - Kuninori Morimoto
+ - Borislav Petkov
+ - Jiri Pirko
+ - Josh Poimboeuf
+ - Sebastian Reichel (Collabora)
+ - Guenter Roeck
+ - Joerg Roedel
+ - Leon Romanovsky
+ - Steven Rostedt (VMware)
+ - Ivan Safonov
+ - Ivan Safonov
+ - Anna Schumaker
+ - Jes Sorensen
+ - K.Y. Srinivasan
+ - Heiko Stuebner
+ - Jiri Kosina (SUSE)
+ - Dmitry Torokhov
+ - Linus Torvalds
+ - Thierry Reding
+ - Rik van Riel
+ - Geert Uytterhoeven (Glider bvba)
+ - Daniel Vetter
+ - Linus Walleij
+ - Richard Weinberger
+ - Dan Williams
+ - Rafael J. Wysocki
+ - Arvind Yadav
+ - Masahiro Yamada
+ - Wei Yongjun
+ - Lv Zheng
F: drivers/iommu/exynos-iommu.c
EZchip NPS platform support
-M: Noam Camus <noamc@ezchip.com>
+M: Elad Kanfi <eladkan@mellanox.com>
+M: Vineet Gupta <vgupta@synopsys.com>
S: Supported
F: arch/arc/plat-eznps
F: arch/arc/boot/dts/eznps.dts
L: linux-fsdevel@vger.kernel.org
S: Maintained
F: include/linux/fcntl.h
-F: include/linux/fs.h
F: include/uapi/linux/fcntl.h
-F: include/uapi/linux/fs.h
F: fs/fcntl.c
F: fs/locks.c
L: linux-fsdevel@vger.kernel.org
S: Maintained
F: fs/*
+F: include/linux/fs.h
+F: include/uapi/linux/fs.h
FINTEK F75375S HARDWARE MONITOR AND FAN CONTROLLER DRIVER
M: Riku Voipio <riku.voipio@iki.fi>
F: Documentation/networking/ieee802154.txt
IFE PROTOCOL
-M: Yotam Gigi <yotamg@mellanox.com>
+M: Yotam Gigi <yotam.gi@gmail.com>
M: Jamal Hadi Salim <jhs@mojatatu.com>
F: net/ife
F: include/net/ife.h
F: drivers/auxdisplay/img-ascii-lcd.c
IMGTEC IR DECODER DRIVER
-M: James Hogan <james.hogan@imgtec.com>
+M: James Hogan <jhogan@kernel.org>
S: Maintained
F: drivers/media/rc/img-ir/
F: arch/arm64/kvm/
KERNEL VIRTUAL MACHINE FOR MIPS (KVM/mips)
-M: James Hogan <james.hogan@imgtec.com>
+M: James Hogan <jhogan@kernel.org>
L: linux-mips@linux-mips.org
S: Supported
F: arch/mips/include/uapi/asm/kvm*
F: arch/mips/kvm/
KERNEL VIRTUAL MACHINE FOR POWERPC (KVM/powerpc)
-M: Alexander Graf <agraf@suse.com>
+M: Paul Mackerras <paulus@ozlabs.org>
L: kvm-ppc@vger.kernel.org
W: http://www.linux-kvm.org/
T: git git://github.com/agraf/linux-2.6.git
S: Orphan
F: drivers/net/wireless/marvell/libertas/
+MARVELL MACCHIATOBIN SUPPORT
+M: Russell King <rmk@armlinux.org.uk>
+L: linux-arm-kernel@lists.infradead.org
+S: Maintained
+F: arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
+
MARVELL MV643XX ETHERNET DRIVER
M: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
L: netdev@vger.kernel.org
F: drivers/net/ethernet/mellanox/mlxsw/
MELLANOX FIRMWARE FLASH LIBRARY (mlxfw)
-M: Yotam Gigi <yotamg@mellanox.com>
+M: mlxsw@mellanox.com
L: netdev@vger.kernel.org
S: Supported
W: http://www.mellanox.com
T: git git://linuxtv.org/media_tree.git
METAG ARCHITECTURE
-M: James Hogan <james.hogan@imgtec.com>
+M: James Hogan <jhogan@kernel.org>
L: linux-metag@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag.git
S: Odd Fixes
MUSB MULTIPOINT HIGH SPEED DUAL-ROLE CONTROLLER
M: Bin Liu <b-liu@ti.com>
L: linux-usb@vger.kernel.org
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git
S: Maintained
F: drivers/usb/musb/
M: Josef Bacik <jbacik@fb.com>
S: Maintained
L: linux-block@vger.kernel.org
-L: nbd-general@lists.sourceforge.net
+L: nbd@other.debian.org
F: Documentation/blockdev/nbd.txt
F: drivers/block/nbd.c
F: include/uapi/linux/nbd.h
PARAVIRT_OPS INTERFACE
M: Juergen Gross <jgross@suse.com>
-M: Chris Wright <chrisw@sous-sol.org>
M: Alok Kataria <akataria@vmware.com>
M: Rusty Russell <rusty@rustcorp.com.au>
L: virtualization@lists.linux-foundation.org
M: Ingo Molnar <mingo@redhat.com>
M: Arnaldo Carvalho de Melo <acme@kernel.org>
R: Alexander Shishkin <alexander.shishkin@linux.intel.com>
+R: Jiri Olsa <jolsa@redhat.com>
+R: Namhyung Kim <namhyung@kernel.org>
L: linux-kernel@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git perf/core
S: Supported
F: drivers/block/ps3vram.c
PSAMPLE PACKET SAMPLING SUPPORT:
-M: Yotam Gigi <yotamg@mellanox.com>
+M: Yotam Gigi <yotam.gi@gmail.com>
S: Maintained
F: net/psample
F: include/net/psample.h
SYNOPSYS HSDK RESET CONTROLLER DRIVER
M: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
S: Supported
-F: drivers/reset/reset-hsdk-v1.c
-F: include/dt-bindings/reset/snps,hsdk-v1-reset.h
-F: Documentation/devicetree/bindings/reset/snps,hsdk-v1-reset.txt
+F: drivers/reset/reset-hsdk.c
+F: include/dt-bindings/reset/snps,hsdk-reset.h
+F: Documentation/devicetree/bindings/reset/snps,hsdk-reset.txt
SYSTEM CONFIGURATION (SYSCON)
M: Lee Jones <lee.jones@linaro.org>
VERSION = 4
PATCHLEVEL = 14
SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc7
NAME = Fearless Coyote
# *DOCUMENTATION*
ifneq ($(KBUILD_OUTPUT),)
# check that the output directory actually exists
saved-output := $(KBUILD_OUTPUT)
-$(shell [ -d $(KBUILD_OUTPUT) ] || mkdir -p $(KBUILD_OUTPUT))
-KBUILD_OUTPUT := $(realpath $(KBUILD_OUTPUT))
+KBUILD_OUTPUT := $(shell mkdir -p $(KBUILD_OUTPUT) && cd $(KBUILD_OUTPUT) \
+ && /bin/pwd)
$(if $(KBUILD_OUTPUT),, \
$(error failed to create output directory "$(saved-output)"))
ifeq ($(cc-name),clang)
ifneq ($(CROSS_COMPILE),)
-CLANG_TARGET := -target $(notdir $(CROSS_COMPILE:%-=%))
+CLANG_TARGET := --target=$(notdir $(CROSS_COMPILE:%-=%))
GCC_TOOLCHAIN := $(realpath $(dir $(shell which $(LD)))/..)
endif
ifneq ($(GCC_TOOLCHAIN),)
-CLANG_GCC_TC := -gcc-toolchain $(GCC_TOOLCHAIN)
+CLANG_GCC_TC := --gcc-toolchain=$(GCC_TOOLCHAIN)
endif
KBUILD_CFLAGS += $(CLANG_TARGET) $(CLANG_GCC_TC)
KBUILD_AFLAGS += $(CLANG_TARGET) $(CLANG_GCC_TC)
ifeq ($(has_libelf),1)
objtool_target := tools/objtool FORCE
else
- $(warning "Cannot use CONFIG_STACK_VALIDATION, please install libelf-dev, libelf-devel or elfutils-libelf-devel")
+ ifdef CONFIG_ORC_UNWINDER
+ $(error "Cannot generate ORC metadata for CONFIG_ORC_UNWINDER=y, please install libelf-dev, libelf-devel or elfutils-libelf-devel")
+ else
+ $(warning "Cannot use CONFIG_STACK_VALIDATION=y, please install libelf-dev, libelf-devel or elfutils-libelf-devel")
+ endif
SKIP_STACK_VALIDATION := 1
export SKIP_STACK_VALIDATION
endif
@echo ' Build, install, and boot kernel before'
@echo ' running kselftest on it'
@echo ' kselftest-clean - Remove all generated kselftest files'
- @echo ' kselftest-merge - Merge all the config dependencies of kselftest to existed'
+ @echo ' kselftest-merge - Merge all the config dependencies of kselftest to existing'
@echo ' .config.'
@echo ''
@echo 'Userspace tools targets:'
and non-text memory will be made non-executable. This provides
protection against certain security exploits (e.g. writing to text)
-config ARCH_WANT_RELAX_ORDER
- bool
-
config ARCH_HAS_REFCOUNT
bool
help
*/
#include <linux/mm_types.h>
+#include <linux/sched.h>
#include <asm/machvec.h>
#include <asm/compiler.h>
* comes in on. This makes interrupt processing much easier.
*/
-static int __init
+static int
alcor_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
- static char irq_tab[7][5] __initdata = {
+ static char irq_tab[7][5] = {
/*INT INTA INTB INTC INTD */
/* note: IDSEL 17 is XLT only */
{16+13, 16+13, 16+13, 16+13, 16+13}, /* IdSel 17, TULIP */
* because it is the Saturn IO (SIO) PCI/ISA Bridge Chip.
*/
-static inline int __init
+static inline int
eb66p_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
- static char irq_tab[5][5] __initdata = {
+ static char irq_tab[5][5] = {
/*INT INTA INTB INTC INTD */
{16+0, 16+0, 16+5, 16+9, 16+13}, /* IdSel 6, slot 0, J25 */
{16+1, 16+1, 16+6, 16+10, 16+14}, /* IdSel 7, slot 1, J26 */
* because it is the Saturn IO (SIO) PCI/ISA Bridge Chip.
*/
-static inline int __init
+static inline int
cabriolet_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
- static char irq_tab[5][5] __initdata = {
+ static char irq_tab[5][5] = {
/*INT INTA INTB INTC INTD */
{ 16+2, 16+2, 16+7, 16+11, 16+15}, /* IdSel 5, slot 2, J21 */
{ 16+0, 16+0, 16+5, 16+9, 16+13}, /* IdSel 6, slot 0, J19 */
*
*/
-static inline int __init
+static inline int
alphapc164_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
- static char irq_tab[7][5] __initdata = {
+ static char irq_tab[7][5] = {
/*INT INTA INTB INTC INTD */
{ 16+2, 16+2, 16+9, 16+13, 16+17}, /* IdSel 5, slot 2, J20 */
{ 16+0, 16+0, 16+7, 16+11, 16+15}, /* IdSel 6, slot 0, J29 */
* 10 64 bit PCI option slot 3 (not bus 0)
*/
-static int __init
+static int
isa_irq_fixup(const struct pci_dev *dev, int irq)
{
u8 irq8;
return irq8 & 0xf;
}
-static int __init
+static int
dp264_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
- static char irq_tab[6][5] __initdata = {
+ static char irq_tab[6][5] = {
/*INT INTA INTB INTC INTD */
{ -1, -1, -1, -1, -1}, /* IdSel 5 ISA Bridge */
{ 16+ 3, 16+ 3, 16+ 2, 16+ 2, 16+ 2}, /* IdSel 6 SCSI builtin*/
return isa_irq_fixup(dev, irq);
}
-static int __init
+static int
monet_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
- static char irq_tab[13][5] __initdata = {
+ static char irq_tab[13][5] = {
/*INT INTA INTB INTC INTD */
{ 45, 45, 45, 45, 45}, /* IdSel 3 21143 PCI1 */
{ -1, -1, -1, -1, -1}, /* IdSel 4 unused */
return isa_irq_fixup(dev, COMMON_TABLE_LOOKUP);
}
-static u8 __init
+static u8
monet_swizzle(struct pci_dev *dev, u8 *pinp)
{
struct pci_controller *hose = dev->sysdata;
return slot;
}
-static int __init
+static int
webbrick_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
- static char irq_tab[13][5] __initdata = {
+ static char irq_tab[13][5] = {
/*INT INTA INTB INTC INTD */
{ -1, -1, -1, -1, -1}, /* IdSel 7 ISA Bridge */
{ -1, -1, -1, -1, -1}, /* IdSel 8 unused */
return isa_irq_fixup(dev, COMMON_TABLE_LOOKUP);
}
-static int __init
+static int
clipper_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
- static char irq_tab[7][5] __initdata = {
+ static char irq_tab[7][5] = {
/*INT INTA INTB INTC INTD */
{ 16+ 8, 16+ 8, 16+ 9, 16+10, 16+11}, /* IdSel 1 slot 1 */
{ 16+12, 16+12, 16+13, 16+14, 16+15}, /* IdSel 2 slot 2 */
* comes in on. This makes interrupt processing much easier.
*/
-static int __init
+static int
eb64p_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
- static char irq_tab[5][5] __initdata = {
+ static char irq_tab[5][5] = {
/*INT INTA INTB INTC INTD */
{16+7, 16+7, 16+7, 16+7, 16+7}, /* IdSel 5, slot ?, ?? */
{16+0, 16+0, 16+2, 16+4, 16+9}, /* IdSel 6, slot ?, ?? */
}
}
-static int __init
+static int
eiger_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
u8 irq_orig;
return irq_orig - 0x80;
}
-static u8 __init
+static u8
eiger_swizzle(struct pci_dev *dev, u8 *pinp)
{
struct pci_controller *hose = dev->sysdata;
* comes in on. This makes interrupt processing much easier.
*/
-static int __init
+static int
miata_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
- static char irq_tab[18][5] __initdata = {
+ static char irq_tab[18][5] = {
/*INT INTA INTB INTC INTD */
{16+ 8, 16+ 8, 16+ 8, 16+ 8, 16+ 8}, /* IdSel 14, DC21142 */
{ -1, -1, -1, -1, -1}, /* IdSel 15, EIDE */
return COMMON_TABLE_LOOKUP;
}
-static u8 __init
+static u8
miata_swizzle(struct pci_dev *dev, u8 *pinp)
{
int slot, pin = *pinp;
* comes in on. This makes interrupt processing much easier.
*/
-static int __init
+static int
mikasa_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
- static char irq_tab[8][5] __initdata = {
+ static char irq_tab[8][5] = {
/*INT INTA INTB INTC INTD */
{16+12, 16+12, 16+12, 16+12, 16+12}, /* IdSel 17, SCSI */
{ -1, -1, -1, -1, -1}, /* IdSel 18, PCEB */
common_init_isa_dma();
}
-static int __init
+static int
nautilus_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
/* Preserve the IRQ set up by the console. */
* comes in on. This makes interrupt processing much easier.
*/
-static int __init
+static int
noritake_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
- static char irq_tab[15][5] __initdata = {
+ static char irq_tab[15][5] = {
/*INT INTA INTB INTC INTD */
/* note: IDSELs 16, 17, and 25 are CORELLE only */
{ 16+1, 16+1, 16+1, 16+1, 16+1}, /* IdSel 16, QLOGIC */
return COMMON_TABLE_LOOKUP;
}
-static u8 __init
+static u8
noritake_swizzle(struct pci_dev *dev, u8 *pinp)
{
int slot, pin = *pinp;
*
*/
-static int __init
+static int
rawhide_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
- static char irq_tab[5][5] __initdata = {
+ static char irq_tab[5][5] = {
/*INT INTA INTB INTC INTD */
{ 16+16, 16+16, 16+16, 16+16, 16+16}, /* IdSel 1 SCSI PCI 1 */
{ 16+ 0, 16+ 0, 16+ 1, 16+ 2, 16+ 3}, /* IdSel 2 slot 2 */
*
*/
-static int __init
+static int
ruffian_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
- static char irq_tab[11][5] __initdata = {
+ static char irq_tab[11][5] = {
/*INT INTA INTB INTC INTD */
{-1, -1, -1, -1, -1}, /* IdSel 13, 21052 */
{-1, -1, -1, -1, -1}, /* IdSel 14, SIO */
return COMMON_TABLE_LOOKUP;
}
-static u8 __init
+static u8
ruffian_swizzle(struct pci_dev *dev, u8 *pinp)
{
int slot, pin = *pinp;
*
*/
-static int __init
+static int
rx164_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
#if 0
{ 16+1, 16+1, 16+6, 16+11, 16+16}, /* IdSel 10, slot 4 */
};
#else
- static char irq_tab[6][5] __initdata = {
+ static char irq_tab[6][5] = {
/*INT INTA INTB INTC INTD */
{ 16+0, 16+0, 16+6, 16+11, 16+16}, /* IdSel 5, slot 0 */
{ 16+1, 16+1, 16+7, 16+12, 16+17}, /* IdSel 6, slot 1 */
* with the values in the irq swizzling tables above.
*/
-static int __init
+static int
sable_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
- static char irq_tab[9][5] __initdata = {
+ static char irq_tab[9][5] = {
/*INT INTA INTB INTC INTD */
{ 32+0, 32+0, 32+0, 32+0, 32+0}, /* IdSel 0, TULIP */
{ 32+1, 32+1, 32+1, 32+1, 32+1}, /* IdSel 1, SCSI */
* with the values in the irq swizzling tables above.
*/
-static int __init
+static int
lynx_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
- static char irq_tab[19][5] __initdata = {
+ static char irq_tab[19][5] = {
/*INT INTA INTB INTC INTD */
{ -1, -1, -1, -1, -1}, /* IdSel 13, PCEB */
{ -1, -1, -1, -1, -1}, /* IdSel 14, PPB */
return COMMON_TABLE_LOOKUP;
}
-static u8 __init
+static u8
lynx_swizzle(struct pci_dev *dev, u8 *pinp)
{
int slot, pin = *pinp;
outb((level_bits >> 8) & 0xff, 0x4d1);
}
-static inline int __init
+static inline int
noname_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
/*
* that they use the default INTA line, if they are interrupt
* driven at all).
*/
- static char irq_tab[][5] __initdata = {
+ static char irq_tab[][5] = {
/*INT A B C D */
{ 3, 3, 3, 3, 3}, /* idsel 6 (53c810) */
{-1, -1, -1, -1, -1}, /* idsel 7 (SIO: PCI/ISA bridge) */
return irq >= 0 ? tmp : -1;
}
-static inline int __init
+static inline int
p2k_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
- static char irq_tab[][5] __initdata = {
+ static char irq_tab[][5] = {
/*INT A B C D */
{ 0, 0, -1, -1, -1}, /* idsel 6 (53c810) */
{-1, -1, -1, -1, -1}, /* idsel 7 (SIO: PCI/ISA bridge) */
* 9 32 bit PCI option slot 3
*/
-static int __init
+static int
sx164_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
- static char irq_tab[5][5] __initdata = {
+ static char irq_tab[5][5] = {
/*INT INTA INTB INTC INTD */
{ 16+ 9, 16+ 9, 16+13, 16+17, 16+21}, /* IdSel 5 slot 2 J17 */
{ 16+11, 16+11, 16+15, 16+19, 16+23}, /* IdSel 6 slot 0 J19 */
* assign it whatever the hell IRQ we like and it doesn't matter.
*/
-static int __init
+static int
takara_map_irq_srm(const struct pci_dev *dev, u8 slot, u8 pin)
{
- static char irq_tab[15][5] __initdata = {
+ static char irq_tab[15][5] = {
{ 16+3, 16+3, 16+3, 16+3, 16+3}, /* slot 6 == device 3 */
{ 16+2, 16+2, 16+2, 16+2, 16+2}, /* slot 7 == device 2 */
{ 16+1, 16+1, 16+1, 16+1, 16+1}, /* slot 8 == device 1 */
return COMMON_TABLE_LOOKUP;
}
-static u8 __init
+static u8
takara_swizzle(struct pci_dev *dev, u8 *pinp)
{
int slot = PCI_SLOT(dev->devfn);
* 7 64 bit PCI 1 option slot 7
*/
-static int __init
+static int
wildfire_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
- static char irq_tab[8][5] __initdata = {
+ static char irq_tab[8][5] = {
/*INT INTA INTB INTC INTD */
{ -1, -1, -1, -1, -1}, /* IdSel 0 ISA Bridge */
{ 36, 36, 36+1, 36+2, 36+3}, /* IdSel 1 SCSI builtin */
select GENERIC_SMP_IDLE_THREAD
select HAVE_ARCH_KGDB
select HAVE_ARCH_TRACEHOOK
- select HAVE_FUTEX_CMPXCHG
+ select HAVE_FUTEX_CMPXCHG if FUTEX
select HAVE_IOREMAP_PROT
select HAVE_KPROBES
select HAVE_KRETPROBES
# published by the Free Software Foundation.
#
-UTS_MACHINE := arc
-
ifeq ($(CROSS_COMPILE),)
ifndef CONFIG_CPU_BIG_ENDIAN
CROSS_COMPILE := arc-linux-
mmcclk: mmcclk {
compatible = "fixed-clock";
- clock-frequency = <50000000>;
+ /*
+ * DW sdio controller has external ciu clock divider
+ * controlled via register in SDIO IP. It divides
+ * sdio_ref_clk (which comes from CGU) by 16 for
+ * default. So default mmcclk clock (which comes
+ * to sdk_in) is 25000000 Hz.
+ */
+ clock-frequency = <25000000>;
#clock-cells = <0>;
};
/dts-v1/;
#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/reset/snps,hsdk-reset.h>
/ {
model = "snps,hsdk";
};
};
- core_clk: core-clk {
+ input_clk: input-clk {
#clock-cells = <0>;
compatible = "fixed-clock";
- clock-frequency = <500000000>;
+ clock-frequency = <33333333>;
};
cpu_intc: cpu-interrupt-controller {
ranges = <0x00000000 0xf0000000 0x10000000>;
+ cgu_rst: reset-controller@8a0 {
+ compatible = "snps,hsdk-reset";
+ #reset-cells = <1>;
+ reg = <0x8A0 0x4>, <0xFF0 0x4>;
+ };
+
+ core_clk: core-clk@0 {
+ compatible = "snps,hsdk-core-pll-clock";
+ reg = <0x00 0x10>, <0x14B8 0x4>;
+ #clock-cells = <0>;
+ clocks = <&input_clk>;
+ };
+
serial: serial@5000 {
compatible = "snps,dw-apb-uart";
reg = <0x5000 0x100>;
mmcclk_ciu: mmcclk-ciu {
compatible = "fixed-clock";
- clock-frequency = <100000000>;
+ /*
+ * DW sdio controller has external ciu clock divider
+ * controlled via register in SDIO IP. Due to its
+ * unexpected default value (it should divide by 1
+ * but it divides by 8) SDIO IP uses wrong clock and
+ * works unstable (see STAR 9001204800)
+ * We switched to the minimum possible value of the
+ * divisor (div-by-2) in HSDK platform code.
+ * So add temporary fix and change clock frequency
+ * to 50000000 Hz until we fix dw sdio driver itself.
+ */
+ clock-frequency = <50000000>;
#clock-cells = <0>;
};
clocks = <&gmacclk>;
clock-names = "stmmaceth";
phy-handle = <&phy0>;
+ resets = <&cgu_rst HSDK_ETH_RESET>;
+ reset-names = "stmmaceth";
mdio {
#address-cells = <1>;
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_STRIP_ASM_SYMS=y
-CONFIG_LOCKUP_DETECTOR=y
+CONFIG_SOFTLOCKUP_DETECTOR=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
# CONFIG_SCHED_DEBUG is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_STRIP_ASM_SYMS=y
-CONFIG_LOCKUP_DETECTOR=y
+CONFIG_SOFTLOCKUP_DETECTOR=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
# CONFIG_SCHED_DEBUG is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_STRIP_ASM_SYMS=y
-CONFIG_LOCKUP_DETECTOR=y
+CONFIG_SOFTLOCKUP_DETECTOR=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
# CONFIG_SCHED_DEBUG is not set
# CONFIG_DEBUG_PREEMPT is not set
CONFIG_NFS_FS=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_LOCKUP_DETECTOR=y
+CONFIG_SOFTLOCKUP_DETECTOR=y
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_STRIP_ASM_SYMS=y
-CONFIG_LOCKUP_DETECTOR=y
+CONFIG_SOFTLOCKUP_DETECTOR=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
# CONFIG_SCHED_DEBUG is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_STRIP_ASM_SYMS=y
CONFIG_DEBUG_SHIRQ=y
-CONFIG_LOCKUP_DETECTOR=y
+CONFIG_SOFTLOCKUP_DETECTOR=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
# CONFIG_SCHED_DEBUG is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_STRIP_ASM_SYMS=y
CONFIG_DEBUG_SHIRQ=y
-CONFIG_LOCKUP_DETECTOR=y
+CONFIG_SOFTLOCKUP_DETECTOR=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=10
# CONFIG_SCHED_DEBUG is not set
# CONFIG_DEBUG_PREEMPT is not set
/* Auxiliary registers */
#define AUX_IDENTITY 4
+#define AUX_EXEC_CTRL 8
#define AUX_INTR_VEC_BASE 0x25
#define AUX_VOL 0x5e
#endif
};
-struct bcr_isa {
+struct bcr_isa_arcv2 {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int div_rem:4, pad2:4, ldd:1, unalign:1, atomic:1, be:1,
- pad1:11, atomic1:1, ver:8;
+ pad1:12, ver:8;
#else
- unsigned int ver:8, atomic1:1, pad1:11, be:1, atomic:1, unalign:1,
+ unsigned int ver:8, pad1:12, be:1, atomic:1, unalign:1,
ldd:1, pad2:4, div_rem:4;
#endif
};
struct cpuinfo_arc_mmu mmu;
struct cpuinfo_arc_bpu bpu;
struct bcr_identity core;
- struct bcr_isa isa;
+ struct bcr_isa_arcv2 isa;
const char *details, *name;
unsigned int vec_base;
struct cpuinfo_arc_ccm iccm, dccm;
struct {
unsigned int swap:1, norm:1, minmax:1, barrel:1, crc:1, swape:1, pad1:2,
- fpu_sp:1, fpu_dp:1, pad2:6,
+ fpu_sp:1, fpu_dp:1, dual_iss_enb:1, dual_iss_exist:1, pad2:4,
debug:1, ap:1, smart:1, rtt:1, pad3:4,
timer0:1, timer1:1, rtc:1, gfrc:1, pad4:4;
} extn;
git.codelabs.ch / muen / linux.git / commitdiff