muen/linux.git
2 years agoMerge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 24 Mar 2019 18:12:27 +0000 (11:12 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Thomas Gleixner:
 "A set of x86 fixes:

   - Prevent potential NULL pointer dereferences in the HPET and HyperV
     code

   - Exclude the GART aperture from /proc/kcore to prevent kernel
     crashes on access

   - Use the correct macros for Cyrix I/O on Geode processors

   - Remove yet another kernel address printk leak

   - Announce microcode reload completion as requested by quite some
     people. Microcode loading has become popular recently.

   - Some 'Make Clang' happy fixlets

   - A few cleanups for recently added code"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/gart: Exclude GART aperture from kcore
  x86/hw_breakpoints: Make default case in hw_breakpoint_arch_parse() return an error
  x86/mm/pti: Make local symbols static
  x86/cpu/cyrix: Remove {get,set}Cx86_old macros used for Cyrix processors
  x86/cpu/cyrix: Use correct macros for Cyrix calls on Geode processors
  x86/microcode: Announce reload operation's completion
  x86/hyperv: Prevent potential NULL pointer dereference
  x86/hpet: Prevent potential NULL pointer dereference
  x86/lib: Fix indentation issue, remove extra tab
  x86/boot: Restrict header scope to make Clang happy
  x86/mm: Don't leak kernel addresses
  x86/cpufeature: Fix various quality problems in the <asm/cpu_device_hd.h> header

2 years agoMerge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 24 Mar 2019 18:09:47 +0000 (11:09 -0700)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull timer fixes from Thomas Gleixner:
 "A set of small fixes plus the removal of stale board support code:

   - Remove the board support code from the clpx711x clocksource driver.
     This change had fallen through the cracks and I'm sending it now
     rather than dealing with people who want to improve that stale code
     for 3 month.

   - Use the proper clocksource mask on RICSV

   - Make local scope functions and variables static"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource/drivers/clps711x: Remove board support
  clocksource/drivers/riscv: Fix clocksource mask
  clocksource/drivers/mips-gic-timer: Make gic_compare_irqaction static
  clocksource/drivers/timer-ti-dm: Make omap_dm_timer_set_load_start() static
  clocksource/drivers/tcb_clksrc: Make tc_clksrc_suspend/resume() static
  clocksource/drivers/clps711x: Make clps711x_clksrc_init() static
  time/jiffies: Make refined_jiffies static

2 years agoMerge branch 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 24 Mar 2019 17:58:01 +0000 (10:58 -0700)]
Merge branch 'locking-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull locking fixes from Thomas Gleixner:
 "Two small fixes:

   - Cure a recently introduces error path hickup which tries to
     unregister a not registered lockdep key in te workqueue code

   - Prevent unaligned cmpxchg() crashes in the robust list handling
     code by sanity checking the user space supplied futex pointer"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  futex: Ensure that futex address is aligned in handle_futex_death()
  workqueue: Only unregister a registered lockdep key

2 years agoMerge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 24 Mar 2019 17:51:23 +0000 (10:51 -0700)]
Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull irq fixes from Thomas Gleixner:
 "A set of fixes for the interrupt subsystem:

   - Remove secondary GIC support on systems w/o device-tree support

   - A set of small fixlets in various irqchip drivers

   - static and fall-through annotations

   - Kernel doc and typo fixes"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Mark expected switch case fall-through
  genirq/devres: Remove excess parameter from kernel doc
  irqchip/irq-mvebu-sei: Make mvebu_sei_ap806_caps static
  irqchip/mbigen: Don't clear eventid when freeing an MSI
  irqchip/stm32: Don't set rising configuration registers at init
  irqchip/stm32: Don't clear rising/falling config registers at init
  dt-bindings: irqchip: renesas-irqc: Document r8a774c0 support
  irqchip/mmp: Make mmp_irq_domain_ops static
  irqchip/brcmstb-l2: Make two init functions static
  genirq: Fix typo in comment of IRQD_MOVE_PCNTXT
  irqchip/gic-v3-its: Fix comparison logic in lpi_range_cmp
  irqchip/gic: Drop support for secondary GIC in non-DT systems
  irqchip/imx-irqsteer: Fix of_property_read_u32() error handling

2 years agoMerge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 24 Mar 2019 17:17:33 +0000 (10:17 -0700)]
Merge branch 'core-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull core fixes from Thomas Gleixner:
 "Two small fixes:

   - Move the large objtool_file struct off the stack so objtool works
     in setups with a tight stack limit.

   - Make a few variables static in the watchdog core code"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  watchdog/core: Make variables static
  objtool: Move objtool_file struct off the stack

2 years agoMerge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux
Linus Torvalds [Sun, 24 Mar 2019 17:01:53 +0000 (10:01 -0700)]
Merge branch 'next' of git://git./linux/kernel/git/rzhang/linux

Pull thermal management fixes from Zhang Rui:

 - Fix a wrong __percpu structure declaration in intel_powerclamp driver
   (Luc Van Oostenryck)

 - Fix truncated name of the idle injection kthreads created by
   intel_powerclamp driver (Zhang Rui)

 - Fix the missing UUID supports in int3400 thermal driver (Matthew
   Garrett)

 - Fix a crash when accessing the debugfs of bcm2835 SoC thermal driver
   (Phil Elwell)

 - A couple of trivial fixes/cleanups in some SoC thermal drivers

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
  thermal/intel_powerclamp: fix truncated kthread name
  thermal: mtk: Allocate enough space for mtk_thermal.
  thermal/int340x_thermal: fix mode setting
  thermal/int340x_thermal: Add additional UUIDs
  thermal: cpu_cooling: Remove unused cur_freq variable
  thermal: bcm2835: Fix crash in bcm2835_thermal_debugfs
  thermal: samsung: Fix incorrect check after code merge
  thermal/intel_powerclamp: fix __percpu declaration of worker_data

2 years agoMerge tag '5.1-rc1-cifs-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Linus Torvalds [Sun, 24 Mar 2019 16:58:08 +0000 (09:58 -0700)]
Merge tag '5.1-rc1-cifs-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull smb3 fixes from Steve French:

 - two fixes for stable for guest mount problems with smb3.1.1

 - two fixes for crediting (SMB3 flow control) on resent requests

 - a byte range lock leak fix

 - two fixes for incorrect rc mappings

* tag '5.1-rc1-cifs-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: update internal module version number
  SMB3: Fix SMB3.1.1 guest mounts to Samba
  cifs: Fix slab-out-of-bounds when tracing SMB tcon
  cifs: allow guest mounts to work for smb3.11
  fix incorrect error code mapping for OBJECTID_NOT_FOUND
  cifs: fix that return -EINVAL when do dedupe operation
  CIFS: Fix an issue with re-sending rdata when transport returning -EAGAIN
  CIFS: Fix an issue with re-sending wdata when transport returning -EAGAIN

2 years agoMerge tag 'auxdisplay-for-linus-v5.1-rc2' of git://github.com/ojeda/linux
Linus Torvalds [Sun, 24 Mar 2019 16:51:55 +0000 (09:51 -0700)]
Merge tag 'auxdisplay-for-linus-v5.1-rc2' of git://github.com/ojeda/linux

Pull auxdisplay updates from Miguel Ojeda:
 "A few fixes and improvements for auxdisplay:

   - Series to fix a memory leak in hd44780 while introducing
     charlcd_free(). From Andy Shevchenko

   - Series to clean up the Kconfig menus and a couple of improvements
     for charlcd. From Mans Rullgard"

* tag 'auxdisplay-for-linus-v5.1-rc2' of git://github.com/ojeda/linux:
  auxdisplay: charlcd: make backlight initial state configurable
  auxdisplay: charlcd: simplify init message display
  auxdisplay: deconfuse configuration
  auxdisplay: hd44780: Convert to use charlcd_free()
  auxdisplay: panel: Convert to use charlcd_free()
  auxdisplay: charlcd: Introduce charlcd_free() helper
  auxdisplay: charlcd: Move to_priv() to charlcd namespace
  auxdisplay: hd44780: Fix memory leak on ->remove()

2 years agoMerge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Linus Torvalds [Sun, 24 Mar 2019 16:43:35 +0000 (09:43 -0700)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "Six fixes to four drivers and two core fixes.

  One core fix simply corrects a missed destroy_rcu_head() but the other
  is hopefully the end of an ongoing effort to make suspend/resume play
  nicely with scsi quiesce"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ibmvscsi: Fix empty event pool access during host removal
  scsi: ibmvscsi: Protect ibmvscsi_head from concurrent modificaiton
  scsi: hisi_sas: Add softreset in hisi_sas_I_T_nexus_reset()
  scsi: qla2xxx: Fix NULL pointer crash due to stale CPUID
  scsi: qla2xxx: Fix FC-AL connection target discovery
  scsi: core: Avoid that a kernel warning appears during system resume
  scsi: core: Also call destroy_rcu_head() for passthrough requests
  scsi: iscsi: flush running unbind operations when removing a session

2 years agoclocksource/drivers/clps711x: Remove board support
Alexander Shiyan [Thu, 20 Dec 2018 11:16:26 +0000 (14:16 +0300)]
clocksource/drivers/clps711x: Remove board support

Since board support for the CLPS711X platform was removed,
remove the board support from the clps711x-timer driver.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lkml.kernel.org/r/20181220111626.17140-1-shc_work@mail.ru
2 years agoMerge tag 'io_uring-20190323' of git://git.kernel.dk/linux-block
Linus Torvalds [Sat, 23 Mar 2019 17:25:12 +0000 (10:25 -0700)]
Merge tag 'io_uring-20190323' of git://git.kernel.dk/linux-block

Pull io_uring fixes and improvements from Jens Axboe:
 "The first five in this series are heavily inspired by the work Al did
  on the aio side to fix the races there.

  The last two re-introduce a feature that was in io_uring before it got
  merged, but which I pulled since we didn't have a good way to have
  BVEC iters that already have a stable reference. These aren't
  necessarily related to block, it's just how io_uring pins fixed
  buffers"

* tag 'io_uring-20190323' of git://git.kernel.dk/linux-block:
  block: add BIO_NO_PAGE_REF flag
  iov_iter: add ITER_BVEC_FLAG_NO_REF flag
  io_uring: mark me as the maintainer
  io_uring: retry bulk slab allocs as single allocs
  io_uring: fix poll races
  io_uring: fix fget/fput handling
  io_uring: add prepped flag
  io_uring: make io_read/write return an integer
  io_uring: use regular request ref counts

2 years agoMerge tag 'for-linus-20190323' of git://git.kernel.dk/linux-block
Linus Torvalds [Sat, 23 Mar 2019 17:14:42 +0000 (10:14 -0700)]
Merge tag 'for-linus-20190323' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:
 "A set of fixes/changes that should go into this series. This contains:

   - Kernel doc / comment updates (Bart, Shenghui)

   - Un-export of core-only used function (Bart)

   - Fix race on loop file access (Dongli)

   - pf/pcd queue cleanup fixes (me)

   - Use appropriate helper for RESTART bit set (Yufen)

   - Use named identifier for classic poll (Yufen)"

* tag 'for-linus-20190323' of git://git.kernel.dk/linux-block:
  sbitmap: trivial - update comment for sbitmap_deferred_clear_bit
  blkcg: Fix kernel-doc warnings
  blk-iolatency: #include "blk.h"
  block: Unexport blk_mq_add_to_requeue_list()
  block: add BLK_MQ_POLL_CLASSIC for hybrid poll and return EINVAL for unexpected value
  blk-mq: remove unused 'nr_expired' from blk_mq_hw_ctx
  loop: access lo_backing_file only when the loop device is Lo_bound
  blk-mq: use blk_mq_sched_mark_restart_hctx to set RESTART
  paride/pcd: cleanup queues when detection fails
  paride/pf: cleanup queues when detection fails

2 years agoMerge tag 'ceph-for-5.1-rc2' of git://github.com/ceph/ceph-client
Linus Torvalds [Sat, 23 Mar 2019 17:04:47 +0000 (10:04 -0700)]
Merge tag 'ceph-for-5.1-rc2' of git://github.com/ceph/ceph-client

Pull ceph fixes from Ilya Dryomov:
 "A follow up for the new alloc_size logic and a blacklisting fix,
  marked for stable"

* tag 'ceph-for-5.1-rc2' of git://github.com/ceph/ceph-client:
  rbd: drop wait_for_latest_osdmap()
  libceph: wait for latest osdmap in ceph_monc_blacklist_add()
  rbd: set io_min, io_opt and discard_granularity to alloc_size

2 years agogenirq: Mark expected switch case fall-through
Gustavo A. R. Silva [Thu, 28 Feb 2019 21:37:14 +0000 (15:37 -0600)]
genirq: Mark expected switch case fall-through

In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.

With -Wimplicit-fallthrough added to CFLAGS:

 kernel/irq/manage.c: In function ‘irq_do_set_affinity’:
 kernel/irq/manage.c:198:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
   cpumask_copy(desc->irq_common_data.affinity, mask);
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 kernel/irq/manage.c:199:2: note: here
   case IRQ_SET_MASK_OK_NOCOPY:
   ^~~~

Annotate it.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20190228213714.GA9246@embeddedor
2 years agoclocksource/drivers/riscv: Fix clocksource mask
Atish Patra [Fri, 22 Mar 2019 21:54:11 +0000 (14:54 -0700)]
clocksource/drivers/riscv: Fix clocksource mask

For all riscv architectures (RV32, RV64 and RV128), the clocksource
is a 64 bit incrementing counter.

Fix the clock source mask accordingly.

Tested on both 64bit and 32 bit virt machine in QEMU.

Fixes: 62b019436814 ("clocksource: new RISC-V SBI timer driver")
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: linux-riscv@lists.infradead.org
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Anup Patel <Anup.Patel@wdc.com>
Cc: Damien Le Moal <Damien.LeMoal@wdc.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20190322215411.19362-1-atish.patra@wdc.com
2 years agox86/gart: Exclude GART aperture from kcore
Kairui Song [Fri, 8 Mar 2019 03:05:08 +0000 (11:05 +0800)]
x86/gart: Exclude GART aperture from kcore

On machines where the GART aperture is mapped over physical RAM,
/proc/kcore contains the GART aperture range. Accessing the GART range via
/proc/kcore results in a kernel crash.

vmcore used to have the same issue, until it was fixed with commit
2a3e83c6f96c ("x86/gart: Exclude GART aperture from vmcore")', leveraging
existing hook infrastructure in vmcore to let /proc/vmcore return zeroes
when attempting to read the aperture region, and so it won't read from the
actual memory.

Apply the same workaround for kcore. First implement the same hook
infrastructure for kcore, then reuse the hook functions introduced in the
previous vmcore fix. Just with some minor adjustment, rename some functions
for more general usage, and simplify the hook infrastructure a bit as there
is no module usage yet.

Suggested-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Kairui Song <kasong@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jiri Bohac <jbohac@suse.cz>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Omar Sandoval <osandov@fb.com>
Cc: Dave Young <dyoung@redhat.com>
Link: https://lkml.kernel.org/r/20190308030508.13548-1-kasong@redhat.com
2 years agocifs: update internal module version number
Steve French [Wed, 20 Mar 2019 21:42:50 +0000 (16:42 -0500)]
cifs: update internal module version number

To 2.19

Signed-off-by: Steve French <stfrench@microsoft.com>
2 years agoSMB3: Fix SMB3.1.1 guest mounts to Samba
Steve French [Sat, 23 Mar 2019 03:31:17 +0000 (22:31 -0500)]
SMB3: Fix SMB3.1.1 guest mounts to Samba

Workaround problem with Samba responses to SMB3.1.1
null user (guest) mounts.  The server doesn't set the
expected flag in the session setup response so we have
to do a similar check to what is done in smb3_validate_negotiate
where we also check if the user is a null user (but not sec=krb5
since username might not be passed in on mount for Kerberos case).

Note that the commit below tightened the conditions and forced signing
for the SMB2-TreeConnect commands as per MS-SMB2.
However, this should only apply to normal user sessions and not for
cases where there is no user (even if server forgets to set the flag
in the response) since we don't have anything useful to sign with.
This is especially important now that the more secure SMB3.1.1 protocol
is in the default dialect list.

An earlier patch ("cifs: allow guest mounts to work for smb3.11") fixed
the guest mounts to Windows.

    Fixes: 6188f28bf608 ("Tree connect for SMB3.1.1 must be signed for non-encrypted shares")

Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
2 years agocifs: Fix slab-out-of-bounds when tracing SMB tcon
Paulo Alcantara (SUSE) [Thu, 21 Mar 2019 22:31:22 +0000 (19:31 -0300)]
cifs: Fix slab-out-of-bounds when tracing SMB tcon

This patch fixes the following KASAN report:

[  779.044746] BUG: KASAN: slab-out-of-bounds in string+0xab/0x180
[  779.044750] Read of size 1 at addr ffff88814f327968 by task trace-cmd/2812

[  779.044756] CPU: 1 PID: 2812 Comm: trace-cmd Not tainted 5.1.0-rc1+ #62
[  779.044760] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-0-ga698c89-prebuilt.qemu.org 04/01/2014
[  779.044761] Call Trace:
[  779.044769]  dump_stack+0x5b/0x90
[  779.044775]  ? string+0xab/0x180
[  779.044781]  print_address_description+0x6c/0x23c
[  779.044787]  ? string+0xab/0x180
[  779.044792]  ? string+0xab/0x180
[  779.044797]  kasan_report.cold.3+0x1a/0x32
[  779.044803]  ? string+0xab/0x180
[  779.044809]  string+0xab/0x180
[  779.044816]  ? widen_string+0x160/0x160
[  779.044822]  ? vsnprintf+0x5bf/0x7f0
[  779.044829]  vsnprintf+0x4e7/0x7f0
[  779.044836]  ? pointer+0x4a0/0x4a0
[  779.044841]  ? seq_buf_vprintf+0x79/0xc0
[  779.044848]  seq_buf_vprintf+0x62/0xc0
[  779.044855]  trace_seq_printf+0x113/0x210
[  779.044861]  ? trace_seq_puts+0x110/0x110
[  779.044867]  ? trace_raw_output_prep+0xd8/0x110
[  779.044876]  trace_raw_output_smb3_tcon_class+0x9f/0xc0
[  779.044882]  print_trace_line+0x377/0x890
[  779.044888]  ? tracing_buffers_read+0x300/0x300
[  779.044893]  ? ring_buffer_read+0x58/0x70
[  779.044899]  s_show+0x6e/0x140
[  779.044906]  seq_read+0x505/0x6a0
[  779.044913]  vfs_read+0xaf/0x1b0
[  779.044919]  ksys_read+0xa1/0x130
[  779.044925]  ? kernel_write+0xa0/0xa0
[  779.044931]  ? __do_page_fault+0x3d5/0x620
[  779.044938]  do_syscall_64+0x63/0x150
[  779.044944]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  779.044949] RIP: 0033:0x7f62c2c2db31
[ 779.044955] Code: fe ff ff 48 8d 3d 17 9e 09 00 48 83 ec 08 e8 96 02
02 00 66 0f 1f 44 00 00 8b 05 fa fc 2c 00 48 63 ff 85 c0 75 13 31 c0
0f 05 <48> 3d 00 f0 ff ff 77 57 f3 c3 0f 1f 44 00 00 55 53 48 89 d5 48
89
[  779.044958] RSP: 002b:00007ffd6e116678 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[  779.044964] RAX: ffffffffffffffda RBX: 0000560a38be9260 RCX: 00007f62c2c2db31
[  779.044966] RDX: 0000000000002000 RSI: 00007ffd6e116710 RDI: 0000000000000003
[  779.044966] RDX: 0000000000002000 RSI: 00007ffd6e116710 RDI: 0000000000000003
[  779.044969] RBP: 00007f62c2ef5420 R08: 0000000000000000 R09: 0000000000000003
[  779.044972] R10: ffffffffffffffa8 R11: 0000000000000246 R12: 00007ffd6e116710
[  779.044975] R13: 0000000000002000 R14: 0000000000000d68 R15: 0000000000002000

[  779.044981] Allocated by task 1257:
[  779.044987]  __kasan_kmalloc.constprop.5+0xc1/0xd0
[  779.044992]  kmem_cache_alloc+0xad/0x1a0
[  779.044997]  getname_flags+0x6c/0x2a0
[  779.045003]  user_path_at_empty+0x1d/0x40
[  779.045008]  do_faccessat+0x12a/0x330
[  779.045012]  do_syscall_64+0x63/0x150
[  779.045017]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

[  779.045019] Freed by task 1257:
[  779.045023]  __kasan_slab_free+0x12e/0x180
[  779.045029]  kmem_cache_free+0x85/0x1b0
[  779.045034]  filename_lookup.part.70+0x176/0x250
[  779.045039]  do_faccessat+0x12a/0x330
[  779.045043]  do_syscall_64+0x63/0x150
[  779.045048]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

[  779.045052] The buggy address belongs to the object at ffff88814f326600
which belongs to the cache names_cache of size 4096
[  779.045057] The buggy address is located 872 bytes to the right of
4096-byte region [ffff88814f326600ffff88814f327600)
[  779.045058] The buggy address belongs to the page:
[  779.045062] page:ffffea00053cc800 count:1 mapcount:0 mapping:ffff88815b191b40 index:0x0 compound_mapcount: 0
[  779.045067] flags: 0x200000000010200(slab|head)
[  779.045075] raw: 0200000000010200 dead000000000100 dead000000000200 ffff88815b191b40
[  779.045081] raw: 0000000000000000 0000000000070007 00000001ffffffff 0000000000000000
[  779.045083] page dumped because: kasan: bad access detected

[  779.045085] Memory state around the buggy address:
[  779.045089]  ffff88814f327800: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  779.045093]  ffff88814f327880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  779.045097] >ffff88814f327900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  779.045099]                                                           ^
[  779.045103]  ffff88814f327980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  779.045107]  ffff88814f327a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  779.045109] ==================================================================
[  779.045110] Disabling lock debugging due to kernel taint

Correctly assign tree name str for smb3_tcon event.

Signed-off-by: Paulo Alcantara (SUSE) <paulo@paulo.ac>
Signed-off-by: Steve French <stfrench@microsoft.com>
2 years agocifs: allow guest mounts to work for smb3.11
Ronnie Sahlberg [Thu, 21 Mar 2019 04:59:02 +0000 (14:59 +1000)]
cifs: allow guest mounts to work for smb3.11

Fix Guest/Anonymous sessions so that they work with SMB 3.11.

The commit noted below tightened the conditions and forced signing for
the SMB2-TreeConnect commands as per MS-SMB2.
However, this should only apply to normal user sessions and not for
Guest/Anonumous sessions.

Fixes: 6188f28bf608 ("Tree connect for SMB3.1.1 must be signed for non-encrypted shares")

Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
2 years agofix incorrect error code mapping for OBJECTID_NOT_FOUND
Steve French [Sun, 17 Mar 2019 20:58:38 +0000 (15:58 -0500)]
fix incorrect error code mapping for OBJECTID_NOT_FOUND

It was mapped to EIO which can be confusing when user space
queries for an object GUID for an object for which the server
file system doesn't support (or hasn't saved one).

As Amir Goldstein suggested this is similar to ENOATTR
(equivalently ENODATA in Linux errno definitions) so
changing NT STATUS code mapping for OBJECTID_NOT_FOUND
to ENODATA.

Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Amir Goldstein <amir73il@gmail.com>
2 years agocifs: fix that return -EINVAL when do dedupe operation
Xiaoli Feng [Sat, 16 Mar 2019 04:11:54 +0000 (12:11 +0800)]
cifs: fix that return -EINVAL when do dedupe operation

dedupe_file_range operations is combiled into remap_file_range.
But it's always skipped for dedupe operations in function
cifs_remap_file_range.

Example to test:
Before this patch:
  # dd if=/dev/zero of=cifs/file bs=1M count=1
  # xfs_io -c "dedupe cifs/file 4k 64k 4k" cifs/file
  XFS_IOC_FILE_EXTENT_SAME: Invalid argument

After this patch:
  # dd if=/dev/zero of=cifs/file bs=1M count=1
  # xfs_io -c "dedupe cifs/file 4k 64k 4k" cifs/file
  XFS_IOC_FILE_EXTENT_SAME: Operation not supported

Influence for xfstests:
generic/091
generic/112
generic/127
generic/263
These tests report this error "do_copy_range:: Invalid
argument" instead of "FIDEDUPERANGE: Invalid argument".
Because there are still two bugs cause these test failed.
https://bugzilla.kernel.org/show_bug.cgi?id=202935
https://bugzilla.kernel.org/show_bug.cgi?id=202785

Signed-off-by: Xiaoli Feng <fengxiaoli0714@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
2 years agoCIFS: Fix an issue with re-sending rdata when transport returning -EAGAIN
Long Li [Fri, 15 Mar 2019 07:55:00 +0000 (07:55 +0000)]
CIFS: Fix an issue with re-sending rdata when transport returning -EAGAIN

When sending a rdata, transport may return -EAGAIN. In this case
we should re-obtain credits because the session may have been
reconnected.

Change in v2: adjust_credits before re-sending

Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2 years agoCIFS: Fix an issue with re-sending wdata when transport returning -EAGAIN
Long Li [Fri, 15 Mar 2019 07:54:59 +0000 (07:54 +0000)]
CIFS: Fix an issue with re-sending wdata when transport returning -EAGAIN

When sending a wdata, transport may return -EAGAIN. In this case
we should re-obtain credits because the session may have been
reconnected.

Change in v2: adjust_credits before re-sending

Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
2 years agoclocksource/drivers/mips-gic-timer: Make gic_compare_irqaction static
YueHaibing [Fri, 22 Mar 2019 14:43:59 +0000 (22:43 +0800)]
clocksource/drivers/mips-gic-timer: Make gic_compare_irqaction static

Fix sparse warning:

drivers/clocksource/mips-gic-timer.c:70:18: warning:
 symbol 'gic_compare_irqaction' was not declared. Should it be static?

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <daniel.lezcano@linaro.org>
Link: https://lkml.kernel.org/r/20190322144359.19516-1-yuehaibing@huawei.com
2 years agoclocksource/drivers/timer-ti-dm: Make omap_dm_timer_set_load_start() static
YueHaibing [Fri, 22 Mar 2019 14:43:02 +0000 (22:43 +0800)]
clocksource/drivers/timer-ti-dm: Make omap_dm_timer_set_load_start() static

Fix sparse warning:

drivers/clocksource/timer-ti-dm.c:589:5: warning:
 symbol 'omap_dm_timer_set_load_start' was not declared. Should it be static?

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <daniel.lezcano@linaro.org>
Link: https://lkml.kernel.org/r/20190322144302.6704-1-yuehaibing@huawei.com
2 years agoclocksource/drivers/tcb_clksrc: Make tc_clksrc_suspend/resume() static
YueHaibing [Fri, 22 Mar 2019 14:39:40 +0000 (22:39 +0800)]
clocksource/drivers/tcb_clksrc: Make tc_clksrc_suspend/resume() static

Fix sparse warnings:

drivers/clocksource/tcb_clksrc.c:74:6: warning:
 symbol 'tc_clksrc_suspend' was not declared. Should it be static?
drivers/clocksource/tcb_clksrc.c:89:6: warning:
 symbol 'tc_clksrc_resume' was not declared. Should it be static?

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <nicolas.ferre@microchip.com>
Cc: <daniel.lezcano@linaro.org>
Cc: <linux-arm-kernel@lists.infradead.org>
Link: https://lkml.kernel.org/r/20190322143940.12396-1-yuehaibing@huawei.com
2 years agoclocksource/drivers/clps711x: Make clps711x_clksrc_init() static
YueHaibing [Fri, 22 Mar 2019 14:37:08 +0000 (22:37 +0800)]
clocksource/drivers/clps711x: Make clps711x_clksrc_init() static

Fix sparse warning:

drivers/clocksource/clps711x-timer.c:96:13: warning:
 symbol 'clps711x_clksrc_init' was not declared. Should it be static?

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <daniel.lezcano@linaro.org>
Cc: <shc_work@mail.ru>
Cc: <linux-arm-kernel@lists.infradead.org>
Link: https://lkml.kernel.org/r/20190322143708.12716-1-yuehaibing@huawei.com
2 years agoMerge tag 'powerpc-5.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc...
Linus Torvalds [Fri, 22 Mar 2019 21:15:11 +0000 (14:15 -0700)]
Merge tag 'powerpc-5.1-3' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:
 "One fix for a boot failure on 32-bit, introduced during the merge
  window.

  A fix for our handling of CLOCK_MONOTONIC in the 64-bit VDSO. Changing
  the wall clock across the Y2038 boundary could cause CLOCK_MONOTONIC
  to jump forward and backward.

  Our spectre_v2 reporting was a bit confusing due to a bug I
  introduced. On some systems it was reporting that the count cache was
  disabled and also that we were flushing the count cache on context
  switch. Only the former is true, and given that the count cache is
  disabled it doesn't make any sense to flush it. No one reported it, so
  presumably the presence of any mitigation is all people check for.

  Finally a small build fix for zsmalloc on 32-bit.

  Thanks to: Ben Hutchings, Christophe Leroy, Diana Craciun, Guenter
  Roeck, Michael Neuling"

* tag 'powerpc-5.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/security: Fix spectre_v2 reporting
  powerpc/mm: Only define MAX_PHYSMEM_BITS in SPARSEMEM configurations
  powerpc/6xx: fix setup and use of SPRN_SPRG_PGDIR for hash32
  powerpc/vdso64: Fix CLOCK_MONOTONIC inconsistencies across Y2038

2 years agoMerge tag 'iommu-fixes-v5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Fri, 22 Mar 2019 21:10:27 +0000 (14:10 -0700)]
Merge tag 'iommu-fixes-v5.1-rc2' of git://git./linux/kernel/git/joro/iommu

Pull iommu fixes from Joerg Roedel:

 - AMD IOMMU fix for sg-mapping with sg->offset > PAGE_SIZE

 - Fix for IOVA code to trigger the slow-path less often

 - Two fixes for Intel VT-d to avoid writing to read-only registers and
   to flush the right domain id for the default domains in scalable mode

* tag 'iommu-fixes-v5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/vt-d: Save the right domain ID used by hardware
  iommu/vt-d: Check capability before disabling protected memory
  iommu/iova: Fix tracking of recently failed iova address
  iommu/amd: fix sg->dma_address for sg->offset bigger than PAGE_SIZE

2 years agoMerge tag 'sound-5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai...
Linus Torvalds [Fri, 22 Mar 2019 21:04:38 +0000 (14:04 -0700)]
Merge tag 'sound-5.1-rc2' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "The only significant change is the regression fixes for the jack
  detection at resume on HD-audio, while others are all small or trivial
  fixes like the coverage of missing error code or usual HD-audio quirk"

* tag 'sound-5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/realtek: Enable headset MIC of Acer AIO with ALC286
  ALSA: hda - Enforces runtime_resume after S3 and S4 for each codec
  ALSA: hda - Don't trigger jackpoll_work in azx_resume
  ALSA: opl3: fix mismatch between snd_opl3_drum_switch definition and declaration
  ALSA: hda - add Lenovo IdeaCentre B550 to the power_save_blacklist
  ALSA: firewire-motu: use 'version' field of unit directory to identify model
  ALSA: sb8: add a check for request_region
  ALSA: echoaudio: add a check for ioremap_nocache

2 years agoMerge tag 'devprop-5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael...
Linus Torvalds [Fri, 22 Mar 2019 19:08:52 +0000 (12:08 -0700)]
Merge tag 'devprop-5.1-rc2' of git://git./linux/kernel/git/rafael/linux-pm

Pull device properties framework fix from Rafael Wysocki:
 "Add missing 'static' in two places (YueHaibing)"

* tag 'devprop-5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  drivers: base: swnode: Make two functions static

2 years agoMerge tag 'acpi-5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael...
Linus Torvalds [Fri, 22 Mar 2019 19:07:06 +0000 (12:07 -0700)]
Merge tag 'acpi-5.1-rc2' of git://git./linux/kernel/git/rafael/linux-pm

Pull ACPI fix from Rafael Wysocki:
 "Prevent device references acquired by bus_find_device() in
  acpi_dev_present() from being leaked (Andy Shevchenko)"

* tag 'acpi-5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / utils: Drop reference in test for device presence

2 years agoMerge tag 'pm-5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Linus Torvalds [Fri, 22 Mar 2019 19:03:19 +0000 (12:03 -0700)]
Merge tag 'pm-5.1-rc2' of git://git./linux/kernel/git/rafael/linux-pm

Pull power management fixes from Rafael Wysocki:
 "These rearrange some code in the generic power domains (genpd)
  framework to avoid a potential deadlock and make the turbostat utility
  behave more as expected.

  Specifics:

   - Rearrange the generic power domains (genpd) code to avoid a
     potential deadlock possible due to its interactions with the clock
     framework (Jiada Wang)

   - Make turbostat return the exit status of the command run under it
     if that command fails (David Arcari)"

* tag 'pm-5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM / Domains: Avoid a potential deadlock
  tools/power turbostat: return the exit status of a command

2 years agoMerge tag 'mmc-v5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Linus Torvalds [Fri, 22 Mar 2019 18:26:57 +0000 (11:26 -0700)]
Merge tag 'mmc-v5.1-rc1' of git://git./linux/kernel/git/ulfh/mmc

Pull MMC fixes from Ulf Hansson:
 "A couple of MMC host fixes intended for v5.1:

   - alcor: Fix DMA reads

   - renesas_sdhi: Limit block count to 16-bit for old revisions

   - sdhci-omap: Fixup support for read-only pins

   - mxcmmc: Revert support for highmem pages

   - davinci/pxamci: Fix clang build warnings"

* tag 'mmc-v5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: renesas_sdhi: limit block count to 16 bit for old revisions
  mmc: alcor: fix DMA reads
  mmc: sdhci-omap: Set caps2 to indicate no physical write protect pin
  mmc: mxcmmc: "Revert mmc: mxcmmc: handle highmem pages"
  mmc: davinci: remove extraneous __init annotation
  mmc: pxamci: fix enum type confusion

2 years agosbitmap: trivial - update comment for sbitmap_deferred_clear_bit
Shenghui Wang [Sat, 16 Mar 2019 08:24:37 +0000 (16:24 +0800)]
sbitmap: trivial - update comment for sbitmap_deferred_clear_bit

"sbitmap_batch_clear" should be "sbitmap_deferred_clear"

Acked-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Shenghui Wang <shhuiw@foxmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2 years agoMerge branch 'x86/cpu' into x86/urgent
Thomas Gleixner [Fri, 22 Mar 2019 16:09:59 +0000 (17:09 +0100)]
Merge branch 'x86/cpu' into x86/urgent

Merge the forgotten cleanup patch for the new file, so the mess does not
propagate further.

2 years agox86/hw_breakpoints: Make default case in hw_breakpoint_arch_parse() return an error
Nathan Chancellor [Thu, 7 Mar 2019 21:27:56 +0000 (14:27 -0700)]
x86/hw_breakpoints: Make default case in hw_breakpoint_arch_parse() return an error

When building with -Wsometimes-uninitialized, Clang warns:

arch/x86/kernel/hw_breakpoint.c:355:2: warning: variable 'align' is used
uninitialized whenever switch default is taken
[-Wsometimes-uninitialized]

The default cannot be reached because arch_build_bp_info() initializes
hw->len to one of the specified cases. Nevertheless the warning is valid
and returning -EINVAL makes sure that this cannot be broken by future
modifications.

Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: clang-built-linux@googlegroups.com
Link: https://github.com/ClangBuiltLinux/linux/issues/392
Link: https://lkml.kernel.org/r/20190307212756.4648-1-natechancellor@gmail.com
2 years agowatchdog/core: Make variables static
Valdis Kletnieks [Tue, 12 Mar 2019 09:33:48 +0000 (05:33 -0400)]
watchdog/core: Make variables static

sparse complains:
  CHECK   kernel/watchdog.c
kernel/watchdog.c:45:19: warning: symbol 'nmi_watchdog_available'
    was not declared. Should it be static?
kernel/watchdog.c:47:16: warning: symbol 'watchdog_allowed_mask'
    was not declared. Should it be static?

They're not referenced by name from anyplace else, make them static.

Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/7855.1552383228@turing-police
2 years agotime/jiffies: Make refined_jiffies static
Valdis Kletnieks [Tue, 12 Mar 2019 08:38:35 +0000 (04:38 -0400)]
time/jiffies: Make refined_jiffies static

sparse complains:

  CHECK   kernel/time/jiffies.c
kernel/time/jiffies.c:92:20: warning: symbol 'refined_jiffies' was not
            declared. Should it be static?

Its only used in file scope. Make it static.

Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/32342.1552379915@turing-police
2 years agogenirq/devres: Remove excess parameter from kernel doc
Valdis Kletnieks [Tue, 12 Mar 2019 08:17:56 +0000 (04:17 -0400)]
genirq/devres: Remove excess parameter from kernel doc

Building with 'make W=1' complains:

  CC      kernel/irq/devres.o
kernel/irq/devres.c:104: warning: Excess function parameter 'thread_fn'
 description in 'devm_request_any_context_irq'

Remove it.

Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/31207.1552378676@turing-police
2 years agox86/mm/pti: Make local symbols static
Valdis Kletnieks [Tue, 12 Mar 2019 07:47:53 +0000 (03:47 -0400)]
x86/mm/pti: Make local symbols static

With 'make C=2 W=1', sparse and gcc both complain:

  CHECK   arch/x86/mm/pti.c
arch/x86/mm/pti.c:84:3: warning: symbol 'pti_mode' was not declared. Should it be static?
arch/x86/mm/pti.c:605:6: warning: symbol 'pti_set_kernel_image_nonglobal' was not declared. Should it be static?
  CC      arch/x86/mm/pti.o
arch/x86/mm/pti.c:605:6: warning: no previous prototype for 'pti_set_kernel_image_nonglobal' [-Wmissing-prototypes]
  605 | void pti_set_kernel_image_nonglobal(void)
      |      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

pti_set_kernel_image_nonglobal() is only used locally. 'pti_mode' exists in
drivers/hwtracing/intel_th/pti.c as well, but it's a completely unrelated
local (static) symbol.

Make both static.

Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/27680.1552376873@turing-police
2 years agofutex: Ensure that futex address is aligned in handle_futex_death()
Chen Jie [Fri, 15 Mar 2019 03:44:38 +0000 (03:44 +0000)]
futex: Ensure that futex address is aligned in handle_futex_death()

The futex code requires that the user space addresses of futexes are 32bit
aligned. sys_futex() checks this in futex_get_keys() but the robust list
code has no alignment check in place.

As a consequence the kernel crashes on architectures with strict alignment
requirements in handle_futex_death() when trying to cmpxchg() on an
unaligned futex address which was retrieved from the robust list.

[ tglx: Rewrote changelog, proper sizeof() based alignement check and add
   comment ]

Fixes: 0771dfefc9e5 ("[PATCH] lightweight robust futexes: core")
Signed-off-by: Chen Jie <chenjie6@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <dvhart@infradead.org>
Cc: <peterz@infradead.org>
Cc: <zengweilin@huawei.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1552621478-119787-1-git-send-email-chenjie6@huawei.com
2 years agoiommu/vt-d: Save the right domain ID used by hardware
Lu Baolu [Wed, 20 Mar 2019 01:58:34 +0000 (09:58 +0800)]
iommu/vt-d: Save the right domain ID used by hardware

The driver sets a default domain id (FLPT_DEFAULT_DID) in the
first level only pasid entry, but saves a different domain id
in @sdev->did. The value saved in @sdev->did will be used to
invalidate the translation caches. Hence, the driver might
result in invalidating the caches with a wrong domain id.

Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Fixes: 1c4f88b7f1f92 ("iommu/vt-d: Shared virtual address in scalable mode")
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2 years agoiommu/vt-d: Check capability before disabling protected memory
Lu Baolu [Wed, 20 Mar 2019 01:58:33 +0000 (09:58 +0800)]
iommu/vt-d: Check capability before disabling protected memory

The spec states in 10.4.16 that the Protected Memory Enable
Register should be treated as read-only for implementations
not supporting protected memory regions (PLMR and PHMR fields
reported as Clear in the Capability register).

Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: mark gross <mgross@intel.com>
Suggested-by: Ashok Raj <ashok.raj@intel.com>
Fixes: f8bab73515ca5 ("intel-iommu: PMEN support")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2 years agoiommu/iova: Fix tracking of recently failed iova address
Robert Richter [Wed, 20 Mar 2019 18:57:23 +0000 (18:57 +0000)]
iommu/iova: Fix tracking of recently failed iova address

If a 32 bit allocation request is too big to possibly succeed, it
early exits with a failure and then should never update max32_alloc_
size. This patch fixes current code, now the size is only updated if
the slow path failed while walking the tree. Without the fix the
allocation may enter the slow path again even if there was a failure
before of a request with the same or a smaller size.

Cc: <stable@vger.kernel.org> # 4.20+
Fixes: bee60e94a1e2 ("iommu/iova: Optimise attempts to allocate iova from 32bit address range")
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Robert Richter <rrichter@marvell.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2 years agoMerge branch 'pm-domains' into pm
Rafael J. Wysocki [Fri, 22 Mar 2019 09:12:13 +0000 (10:12 +0100)]
Merge branch 'pm-domains' into pm

* pm-domains:
  PM / Domains: Avoid a potential deadlock

2 years agoMerge tag 'drm-fixes-2019-03-22' of git://anongit.freedesktop.org/drm/drm
Linus Torvalds [Fri, 22 Mar 2019 03:40:05 +0000 (20:40 -0700)]
Merge tag 'drm-fixes-2019-03-22' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
 "i915, amdgpu, vmwgfx, exynos, nouveau and udl fixes.

  Seems to be lots of little minor ones for regressions in rc1, and some
  cleanups. The exynos one is the largest one, and is for a hw
  difference between exynos versions"

* tag 'drm-fixes-2019-03-22' of git://anongit.freedesktop.org/drm/drm:
  drm/nouveau/dmem: empty chunk do not have a buffer object associated with them.
  drm/nouveau/debugfs: Fix check of pm_runtime_get_sync failure
  drm/nouveau/dmem: Fix a NULL vs IS_ERR() check
  drm/nouveau/dmem: remove set but not used variable 'drm'
  drm/exynos/mixer: fix MIXER shadow registry synchronisation code
  drm/vmwgfx: Don't double-free the mode stored in par->set_mode
  drm/vmwgfx: Return 0 when gmrid::get_node runs out of ID's
  drm/amdgpu: fix invalid use of change_bit
  drm/amdgpu: revert "cleanup setting bulk_movable"
  drm/i915: Sanity check mmap length against object size
  drm/i915: Fix off-by-one in reporting hanging process
  drm/i915/bios: assume eDP is present on port A when there is no VBT
  drm/udl: use drm_gem_object_put_unlocked.

2 years agoMerge branch 'drm-fixes-5.1' of git://people.freedesktop.org/~agd5f/linux into drm...
Dave Airlie [Fri, 22 Mar 2019 02:07:16 +0000 (12:07 +1000)]
Merge branch 'drm-fixes-5.1' of git://people.freedesktop.org/~agd5f/linux into drm-fixes

- Parially revert a bulk move clean up change to fix a ref count bug
- Fix invalid use of change_bit that caused a crash on PPC64 and ARM64

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190321020933.3508-1-alexander.deucher@amd.com
2 years agoMerge branch 'vmwgfx-fixes-5.1' of git://people.freedesktop.org/~thomash/linux into...
Dave Airlie [Fri, 22 Mar 2019 01:53:28 +0000 (11:53 +1000)]
Merge branch 'vmwgfx-fixes-5.1' of git://people.freedesktop.org/~thomash/linux into drm-fixes

Two fixes CC'd stable. One fix for a long-standing a bit hard-to-trigger fbdev
modesetting bug and one out-of-bo-id fix.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thellstrom@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190321112026.114328-1-thellstrom@vmware.com
2 years agoMerge tag 'exynos-drm-fixes-for-5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel...
Dave Airlie [Fri, 22 Mar 2019 01:52:40 +0000 (11:52 +1000)]
Merge tag 'exynos-drm-fixes-for-5.1-rc2' of git://git./linux/kernel/git/daeinki/drm-exynos into drm-fixes

- Fix page fault issue at Mixer device
  . This patch fixes the page fault issue by correcting sychronization
    method for updating shadow registers for Mixer device.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1553162223-10090-1-git-send-email-inki.dae@samsung.com
2 years agoMerge tag 'drm-intel-fixes-2019-03-20' of git://anongit.freedesktop.org/drm/drm-intel...
Dave Airlie [Fri, 22 Mar 2019 00:41:51 +0000 (10:41 +1000)]
Merge tag 'drm-intel-fixes-2019-03-20' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

A protection on our mmap against attempts to map past the end of the object;
plus a fix off-by-one in our hang report and a protection;
and a fix for eDP panels on Gen9 platforms on VBT absence.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190320201451.GA7993@intel.com
2 years agoMerge branch 'linux-5.1' of git://github.com/skeggsb/linux into drm-fixes
Dave Airlie [Fri, 22 Mar 2019 00:39:27 +0000 (10:39 +1000)]
Merge branch 'linux-5.1' of git://github.com/skeggsb/linux into drm-fixes

Some minor nouveau dmem and other fixes.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CABDvA==kMkD6n-cS9KpQBcTU1E8p7Wc+H1ZuOhSfD7yTFJVvkw@mail.gmail.com
2 years agodrm/nouveau/dmem: empty chunk do not have a buffer object associated with them.
Jérôme Glisse [Thu, 21 Mar 2019 19:42:18 +0000 (15:42 -0400)]
drm/nouveau/dmem: empty chunk do not have a buffer object associated with them.

Empty chunk do not have a bo associated with them so no need to pin/unpin
on suspend/resume.

This fix suspend/resume on 5.1rc1 when NOUVEAU_SVM is enabled.

Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
Reviewed-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de>
Tested-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2 years agodrm/nouveau/debugfs: Fix check of pm_runtime_get_sync failure
YueHaibing [Thu, 28 Feb 2019 12:24:59 +0000 (20:24 +0800)]
drm/nouveau/debugfs: Fix check of pm_runtime_get_sync failure

pm_runtime_get_sync returns negative on failure.

Fixes: eaeb9010bb4b ("drm/nouveau/debugfs: Wake up GPU before doing any reclocking")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2 years agodrm/nouveau/dmem: Fix a NULL vs IS_ERR() check
Dan Carpenter [Fri, 22 Feb 2019 06:34:04 +0000 (09:34 +0300)]
drm/nouveau/dmem: Fix a NULL vs IS_ERR() check

The hmm_devmem_add() function doesn't return NULL, it returns error
pointers.

Fixes: 5be73b690875 ("drm/nouveau/dmem: device memory helpers for SVM")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2 years agodrm/nouveau/dmem: remove set but not used variable 'drm'
YueHaibing [Thu, 21 Feb 2019 03:38:51 +0000 (03:38 +0000)]
drm/nouveau/dmem: remove set but not used variable 'drm'

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/gpu/drm/nouveau/nouveau_dmem.c: In function 'nouveau_dmem_free':
drivers/gpu/drm/nouveau/nouveau_dmem.c:103:22: warning:
 variable 'drm' set but not used [-Wunused-but-set-variable]
  struct nouveau_drm *drm;
                      ^

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2 years agoMerge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Linus Torvalds [Thu, 21 Mar 2019 18:48:06 +0000 (11:48 -0700)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull arm64 fixes from Catalin Marinas:
 "Mostly fixes apart from the kprobe blacklist checking which was
  deferred because of conflicting with a fix merged after I pinned the
  arm64 for-next/core branch (f2b3d8566d81 "arm64: kprobe: Always
  blacklist the KVM world-switch code").

  Summary:

   - Update the kprobe blacklist checking for arm64. This was supposed
     to be queued during the merging window but, due to conflicts, it
     was deferred post -rc1

   - Extend the Fujitsu erratum 010001 workaround to A64FX v1r0

   - Whitelist HiSilicon Taishan v110 CPUs as not susceptible to
     Meltdown

   - Export save_stack_trace_regs()

   - Remove obsolete selection of MULTI_IRQ_HANDLER"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: remove obsolete selection of MULTI_IRQ_HANDLER
  arm64: kpti: Whitelist HiSilicon Taishan v110 CPUs
  arm64: Add MIDR encoding for HiSilicon Taishan CPUs
  arm64/stacktrace: Export save_stack_trace_regs()
  arm64: apply workaround on A64FX v1r0
  arm64: kprobes: Use arch_populate_kprobe_blacklist()
  arm64: kprobes: Move exception_text check in blacklist
  arm64: kprobes: Remove unneeded RODATA check
  arm64: kprobes: Move extable address check into arch_prepare_kprobe()

2 years agoMerge tag 'selinux-pr-20190321' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Thu, 21 Mar 2019 18:12:56 +0000 (11:12 -0700)]
Merge tag 'selinux-pr-20190321' of git://git./linux/kernel/git/pcmoore/selinux

Pull selinux fix from Paul Moore:
 "Another small SELinux fix for v5.1"

* tag 'selinux-pr-20190321' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: fix NULL dereference in policydb_destroy()

2 years agoMerge tag 'fixes_for_v5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack...
Linus Torvalds [Thu, 21 Mar 2019 17:31:55 +0000 (10:31 -0700)]
Merge tag 'fixes_for_v5.1-rc2' of git://git./linux/kernel/git/jack/linux-fs

Pull udf fixes from Jan Kara:
 "Two udf error handling fixes"

* tag 'fixes_for_v5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  udf: Propagate errors from udf_truncate_extents()
  udf: Fix crash on IO error during truncate

2 years agoMerge tag 'fsnotify_for_v5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Thu, 21 Mar 2019 17:24:00 +0000 (10:24 -0700)]
Merge tag 'fsnotify_for_v5.1-rc2' of git://git./linux/kernel/git/jack/linux-fs

Pull fsnotify fixes from Jan Kara:
 "One inotify and one fanotify fix"

* tag 'fsnotify_for_v5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  fanotify: Allow copying of file handle to userspace
  inotify: Fix fsnotify_mark refcount leak in inotify_update_existing_watch()

2 years agoirqchip/irq-mvebu-sei: Make mvebu_sei_ap806_caps static
YueHaibing [Thu, 21 Mar 2019 15:14:48 +0000 (23:14 +0800)]
irqchip/irq-mvebu-sei: Make mvebu_sei_ap806_caps static

Fix sparse warning:

drivers/irqchip/irq-mvebu-sei.c:481:23: warning:
 symbol 'mvebu_sei_ap806_caps' was not declared. Should it be static?

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <jason@lakedaemon.net>
Cc: <andrew@lunn.ch>
Cc: <gregory.clement@bootlin.com>
Cc: <sebastian.hesselbarth@gmail.com>
Cc: <marc.zyngier@arm.com>
Cc: <linux-arm-kernel@lists.infradead.org>
Link: https://lkml.kernel.org/r/20190321151448.15600-1-yuehaibing@huawei.com
2 years agoMerge tag 'irqchip-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm...
Thomas Gleixner [Thu, 21 Mar 2019 11:30:54 +0000 (12:30 +0100)]
Merge tag 'irqchip-5.1-2' of git://git./linux/kernel/git/maz/arm-platforms into irq/urgent

Pull irqchip updates for 5.1 from Marc Zyngier:

 - irqsteer error handling fix
 - GICv3 range coalescing fix
 - stm32 coprocessor coexistence fixes
 - mbigen MSI teardown fix
 - non-DT secondary GIC infrastructure removed
 - various cleanups (brcmstb-l2, mmp)
 - new DT bindings (r8a774c0)

2 years agox86/cpu/cyrix: Remove {get,set}Cx86_old macros used for Cyrix processors
Matthew Whitehead [Thu, 14 Mar 2019 20:46:01 +0000 (16:46 -0400)]
x86/cpu/cyrix: Remove {get,set}Cx86_old macros used for Cyrix processors

The getCx86_old() and setCx86_old() macros have been replaced with
correctly working getCx86() and setCx86(), so remove these unused macros.

Signed-off-by: Matthew Whitehead <tedheadster@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: luto@kernel.org
Link: https://lkml.kernel.org/r/1552596361-8967-3-git-send-email-tedheadster@gmail.com
2 years agox86/cpu/cyrix: Use correct macros for Cyrix calls on Geode processors
Matthew Whitehead [Thu, 14 Mar 2019 20:46:00 +0000 (16:46 -0400)]
x86/cpu/cyrix: Use correct macros for Cyrix calls on Geode processors

There are comments in processor-cyrix.h advising you to _not_ make calls
using the deprecated macros in this style:

  setCx86_old(CX86_CCR4, getCx86_old(CX86_CCR4) | 0x80);

This is because it expands the macro into a non-functioning calling
sequence. The calling order must be:

  outb(CX86_CCR2, 0x22);
  inb(0x23);

From the comments:

 * When using the old macros a line like
 *   setCx86(CX86_CCR2, getCx86(CX86_CCR2) | 0x88);
 * gets expanded to:
 *  do {
 *    outb((CX86_CCR2), 0x22);
 *    outb((({
 *        outb((CX86_CCR2), 0x22);
 *        inb(0x23);
 *    }) | 0x88), 0x23);
 *  } while (0);

The new macros fix this problem, so use them instead. Tested on an
actual Geode processor.

Signed-off-by: Matthew Whitehead <tedheadster@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: luto@kernel.org
Link: https://lkml.kernel.org/r/1552596361-8967-2-git-send-email-tedheadster@gmail.com
2 years agox86/microcode: Announce reload operation's completion
Borislav Petkov [Wed, 13 Mar 2019 11:00:22 +0000 (12:00 +0100)]
x86/microcode: Announce reload operation's completion

By popular demand, issue a single line to dmesg after the reload
operation completes to let the user know that a reload has at least been
attempted.

Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190313110022.8229-1-bp@alien8.de
2 years agox86/hyperv: Prevent potential NULL pointer dereference
Kangjie Lu [Thu, 14 Mar 2019 05:46:51 +0000 (00:46 -0500)]
x86/hyperv: Prevent potential NULL pointer dereference

The page allocation in hv_cpu_init() can fail, but the code does not
have a check for that.

Add a check and return -ENOMEM when the allocation fails.

[ tglx: Massaged changelog ]

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Acked-by: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: pakki001@umn.edu
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: linux-hyperv@vger.kernel.org
Link: https://lkml.kernel.org/r/20190314054651.1315-1-kjlu@umn.edu
2 years agox86/hpet: Prevent potential NULL pointer dereference
Aditya Pakki [Tue, 19 Mar 2019 02:19:56 +0000 (21:19 -0500)]
x86/hpet: Prevent potential NULL pointer dereference

hpet_virt_address may be NULL when ioremap_nocache fail, but the code lacks
a check.

Add a check to prevent NULL pointer dereference.

Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: kjlu@umn.edu
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Joe Perches <joe@perches.com>
Cc: Nicolai Stange <nstange@suse.de>
Cc: Roland Dreier <roland@purestorage.com>
Link: https://lkml.kernel.org/r/20190319021958.17275-1-pakki001@umn.edu
2 years agox86/lib: Fix indentation issue, remove extra tab
Colin Ian King [Thu, 14 Mar 2019 23:08:38 +0000 (23:08 +0000)]
x86/lib: Fix indentation issue, remove extra tab

The increment of buff is indented one level too deeply, clean
this up by removing a tab.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: kernel-janitors@vger.kernel.org
Link: https://lkml.kernel.org/r/20190314230838.18256-1-colin.king@canonical.com
2 years agox86/boot: Restrict header scope to make Clang happy
Nick Desaulniers [Thu, 14 Mar 2019 22:14:57 +0000 (15:14 -0700)]
x86/boot: Restrict header scope to make Clang happy

The inclusion of <linux/kernel.h> was causing issue as the definition of
__arch_hweight64 from arch/x86/include/asm/arch_hweight.h eventually gets
included. The definition is problematic when compiled with -m16 (all code
in arch/x86/boot/ is) as the "D" inline assembly constraint is rejected
by both compilers when passed an argument of type long long (regardless
of signedness, anything smaller is fine).

Because GCC performs inlining before semantic analysis, and
__arch_hweight64 is dead in this translation unit, GCC does not report
any issues at compile time.  Clang does the semantic analysis in the
front end, before inlining (run in the middle) can determine the code is
dead. I consider this another case of PR33587, which I think we can do
more work to solve.

It turns out that arch/x86/boot/string.c doesn't actually need
linux/kernel.h, simply linux/limits.h and linux/compiler.h.

Suggested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Cc: bp@alien8.de
Cc: niravd@google.com
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Chao Fan <fanc.fnst@cn.fujitsu.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Link: https://bugs.llvm.org/show_bug.cgi?id=33587
Link: https://github.com/ClangBuiltLinux/linux/issues/347
Link: https://lkml.kernel.org/r/20190314221458.83047-1-ndesaulniers@google.com
2 years agoirqchip/mbigen: Don't clear eventid when freeing an MSI
Jianguo Chen [Wed, 20 Mar 2019 18:54:21 +0000 (18:54 +0000)]
irqchip/mbigen: Don't clear eventid when freeing an MSI

mbigen_write_msg clears eventid bits of a mbigen register
when free a interrupt, because msi_domain_deactivate memset
struct msg to zero. Then multiple mbigen pins with zero eventid
will report the same interrupt number.

The eventid clear call trace:
                free_irq
                __free_irq
                irq_shutdown
                irq_domain_deactivate_irq
                __irq_domain_deactivate_irq
                __irq_domain_deactivate_irq
                msi_domain_deactivate
                platform_msi_write_msg
                mbigen_write_msg

Signed-off-by: Jianguo Chen <chenjianguo3@huawei.com>
[maz: massaged subject]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2 years agoirqchip/stm32: Don't set rising configuration registers at init
Fabien Dessenne [Thu, 7 Mar 2019 18:40:36 +0000 (19:40 +0100)]
irqchip/stm32: Don't set rising configuration registers at init

The rising configuration status register (rtsr) is not banked.
As it is shared with the co-processor, it should not be written at probe
time, else the co-processor configuration will be lost.

Fixes: f9fc1745501e ("irqchip/stm32: Add host and driver data structures")
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2 years agoirqchip/stm32: Don't clear rising/falling config registers at init
Fabien Dessenne [Thu, 7 Mar 2019 18:40:35 +0000 (19:40 +0100)]
irqchip/stm32: Don't clear rising/falling config registers at init

Falling and rising configuration and status registers are not banked.
As they are shared with M4 co-processor, they should not be cleared
at probe time, else M4 co-processor configuration will be lost.

Fixes: f9fc1745501e ("irqchip/stm32: Add host and driver data structures")
Signed-off-by: Loic Pallardy <loic.pallardy@st.com>
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2 years agodt-bindings: irqchip: renesas-irqc: Document r8a774c0 support
Fabrizio Castro [Tue, 19 Mar 2019 11:02:01 +0000 (11:02 +0000)]
dt-bindings: irqchip: renesas-irqc: Document r8a774c0 support

Document RZ/G2E (R8A774C0) SoC bindings.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2 years agoirqchip/mmp: Make mmp_irq_domain_ops static
YueHaibing [Wed, 20 Mar 2019 13:40:27 +0000 (21:40 +0800)]
irqchip/mmp: Make mmp_irq_domain_ops static

Fix sparse warning:

drivers/irqchip/irq-mmp.c:182:29: warning:
 symbol 'mmp_irq_domain_ops' was not declared. Should it be static?

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2 years agoirqchip/brcmstb-l2: Make two init functions static
YueHaibing [Wed, 20 Mar 2019 14:22:20 +0000 (22:22 +0800)]
irqchip/brcmstb-l2: Make two init functions static

Fix sparse warnings:

drivers/irqchip/irq-brcmstb-l2.c:278:12: warning:
 symbol 'brcmstb_l2_edge_intc_of_init' was not declared. Should it be static?
drivers/irqchip/irq-brcmstb-l2.c:285:12: warning:
 symbol 'brcmstb_l2_lvl_intc_of_init' was not declared. Should it be static?

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2 years agoobjtool: Move objtool_file struct off the stack
Josh Poimboeuf [Tue, 19 Mar 2019 00:09:38 +0000 (19:09 -0500)]
objtool: Move objtool_file struct off the stack

Objtool uses over 512k of stack, thanks to the hash table embedded in
the objtool_file struct.  This causes an unnecessarily large stack
allocation and breaks users with low stack limits.

Move the struct off the stack.

Fixes: 042ba73fe7eb ("objtool: Add several performance improvements")
Reported-by: Vassili Karpov <moosotc@gmail.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/df92dcbc4b84b02ffa252f46876df125fb56e2d7.1552954176.git.jpoimboe@redhat.com
2 years agoworkqueue: Only unregister a registered lockdep key
Bart Van Assche [Mon, 11 Mar 2019 23:02:55 +0000 (16:02 -0700)]
workqueue: Only unregister a registered lockdep key

The recent change to prevent use after free and a memory leak introduced an
unconditional call to wq_unregister_lockdep() in the error handling
path. If the lockdep key had not been registered yet, then the lockdep core
emits a warning.

Only call wq_unregister_lockdep() if wq_register_lockdep() has been
called first.

Fixes: 009bb421b6ce ("workqueue, lockdep: Fix an alloc_workqueue() error path")
Reported-by: syzbot+be0c198232f86389c3dd@syzkaller.appspotmail.com
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Qian Cai <cai@lca.pw>
Link: https://lkml.kernel.org/r/20190311230255.176081-1-bvanassche@acm.org
2 years agogenirq: Fix typo in comment of IRQD_MOVE_PCNTXT
Peter Xu [Mon, 18 Mar 2019 06:51:23 +0000 (14:51 +0800)]
genirq: Fix typo in comment of IRQD_MOVE_PCNTXT

Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Dou Liyang <douliyangs@gmail.com>
Cc: Julien Thierry <julien.thierry@arm.com>
Link: https://lkml.kernel.org/r/20190318065123.11862-1-peterx@redhat.com
2 years agommc: renesas_sdhi: limit block count to 16 bit for old revisions
Wolfram Sang [Tue, 19 Mar 2019 10:12:59 +0000 (11:12 +0100)]
mmc: renesas_sdhi: limit block count to 16 bit for old revisions

R-Car Gen2 has two different SDHI incarnations in the same chip. The
older one does not support the recently introduced 32 bit register
access to the block count register. Make sure we use this feature only
after the first known version.

Thanks to the Renesas Testing team for this bug report!

Fixes: 5603731a15ef ("mmc: tmio: fix access width of Block Count Register")
Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Tested-by: Phong Hoang <phong.hoang.wz@renesas.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2 years agommc: alcor: fix DMA reads
Daniel Drake [Wed, 20 Mar 2019 06:36:53 +0000 (14:36 +0800)]
mmc: alcor: fix DMA reads

Setting max_blk_count to 1 here was causing the mmc block layer
to always use the MMC_READ_SINGLE_BLOCK command here, which the
driver does not DMA-accelerate.

Drop the max_blk_ settings here. The mmc host defaults suffice,
along with the max_segs and max_seg_size settings, which I have
now documented in more detail.

Now each MMC command reads 4 512-byte blocks, using DMA instead of
PIO. On my SD card, this increases read performance (measured with dd)
from 167kb/sec to 4.6mb/sec.

Link: http://lkml.kernel.org/r/CAD8Lp47L5T3jnAjBiPs1cQ+yFA3L6LJtgFvMETnBrY63-Zdi2g@mail.gmail.com
Signed-off-by: Daniel Drake <drake@endlessm.com>
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
Fixes: c5413ad815a6 ("mmc: add new Alcor Micro Cardreader SD/MMC driver")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2 years agommc: sdhci-omap: Set caps2 to indicate no physical write protect pin
Kishon Vijay Abraham I [Thu, 21 Mar 2019 06:15:44 +0000 (11:45 +0530)]
mmc: sdhci-omap: Set caps2 to indicate no physical write protect pin

After commit 6d5cd068ee59fba ("mmc: sdhci: use WP GPIO in
sdhci_check_ro()") and commit 39ee32ce486756f ("mmc: sdhci-omap: drop
->get_ro() implementation"), sdhci-omap relied on SDHCI_PRESENT_STATE
to check if the card is read-only, if wp-gpios is not populated
in device tree. However SDHCI_PRESENT_STATE in sdhci-omap does not have
correct read-only state.

sdhci-omap can be used by platforms with both micro SD slot and standard
SD slot with physical write protect pin (using GPIO). Set caps2 to
MMC_CAP2_NO_WRITE_PROTECT based on if wp-gpios property is populated or
not.

This fix is required since existing device-tree node doesn't have
"disable-wp" property and to preserve old-dt compatibility.

Fixes: 6d5cd068ee59fba ("mmc: sdhci: use WP GPIO in sdhci_check_ro()")
Fixes: 39ee32ce486756f ("mmc: sdhci-omap: drop ->get_ro() implementation")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2 years agopowerpc/security: Fix spectre_v2 reporting
Michael Ellerman [Thu, 21 Mar 2019 04:24:33 +0000 (15:24 +1100)]
powerpc/security: Fix spectre_v2 reporting

When I updated the spectre_v2 reporting to handle software count cache
flush I got the logic wrong when there's no software count cache
enabled at all.

The result is that on systems with the software count cache flush
disabled we print:

  Mitigation: Indirect branch cache disabled, Software count cache flush

Which correctly indicates that the count cache is disabled, but
incorrectly says the software count cache flush is enabled.

The root of the problem is that we are trying to handle all
combinations of options. But we know now that we only expect to see
the software count cache flush enabled if the other options are false.

So split the two cases, which simplifies the logic and fixes the bug.
We were also missing a space before "(hardware accelerated)".

The result is we see one of:

  Mitigation: Indirect branch serialisation (kernel only)
  Mitigation: Indirect branch cache disabled
  Mitigation: Software count cache flush
  Mitigation: Software count cache flush (hardware accelerated)

Fixes: ee13cb249fab ("powerpc/64s: Add support for software count cache flush")
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Michael Neuling <mikey@neuling.org>
Reviewed-by: Diana Craciun <diana.craciun@nxp.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2 years agommc: mxcmmc: "Revert mmc: mxcmmc: handle highmem pages"
Alexander Shiyan [Sun, 17 Mar 2019 09:58:25 +0000 (12:58 +0300)]
mmc: mxcmmc: "Revert mmc: mxcmmc: handle highmem pages"

This reverts commit b189e7589f6d3411e85c6b7ae6eef158f08f388f.

Unable to handle kernel paging request at virtual address c8358000
pgd = efa405c3
[c8358000] *pgd=00000000
Internal error: Oops: 805 [#1] PREEMPT ARM
CPU: 0 PID: 711 Comm: kworker/0:2 Not tainted 4.20.0+ #30
Hardware name: Freescale i.MX27 (Device Tree Support)
Workqueue: events mxcmci_datawork
PC is at mxcmci_datawork+0xbc/0x2ac
LR is at mxcmci_datawork+0xac/0x2ac
pc : [<c04e33c8>]    lr : [<c04e33b8>]    psr: 60000013
sp : c6c93f08  ip : 24004180  fp : 00000008
r10: c8358000  r9 : c78b3e24  r8 : c6c92000
r7 : 00000000  r6 : c7bb8680  r5 : c7bb86d4  r4 : c78b3de0
r3 : 00002502  r2 : c090b2e0  r1 : 00000880  r0 : 00000000
Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
Control: 0005317f  Table: a68a8000  DAC: 00000055
Process kworker/0:2 (pid: 711, stack limit = 0x389543bc)
Stack: (0xc6c93f08 to 0xc6c94000)
3f00:                   c7bb86d4 00000000 00000000 c6cbfde0 c7bb86d4 c7ee4200
3f20: 00000000 c0907ea8 00000000 c7bb86d8 c0907ea8 c012077c c6cbfde0 c7bb86d4
3f40: c6cbfde0 c6c92000 c6cbfdf4 c09280ba c0907ea8 c090b2e0 c0907ebc c0120c18
3f60: c6cbfde0 00000000 00000000 c6cbb580 c7ba7c40 c7837edc c6cbb598 00000000
3f80: c6cbfde0 c01208f8 00000000 c01254fc c7ba7c40 c0125400 00000000 00000000
3fa0: 00000000 00000000 00000000 c01010d0 00000000 00000000 00000000 00000000
3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[<c04e33c8>] (mxcmci_datawork) from [<c012077c>] (process_one_work+0x1f0/0x338)
[<c012077c>] (process_one_work) from [<c0120c18>] (worker_thread+0x320/0x474)
[<c0120c18>] (worker_thread) from [<c01254fc>] (kthread+0xfc/0x118)
[<c01254fc>] (kthread) from [<c01010d0>] (ret_from_fork+0x14/0x24)
Exception stack(0xc6c93fb0 to 0xc6c93ff8)
3fa0:                                     00000000 00000000 00000000 00000000
3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
3fe0: 00000000 00000000 00000000 00000000 00000013 00000000
Code: e3500000 1a000059 e5153050 e5933038 (e48a3004)
---[ end trace 54ca629b75f0e737 ]---
note: kworker/0:2[711] exited with preempt_count 1

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Fixes: b189e7589f6d ("mmc: mxcmmc: handle highmem pages")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2 years agoALSA: hda/realtek: Enable headset MIC of Acer AIO with ALC286
Jian-Hong Pan [Fri, 15 Mar 2019 09:51:09 +0000 (17:51 +0800)]
ALSA: hda/realtek: Enable headset MIC of Acer AIO with ALC286

Some Acer AIO desktops like Veriton Z6860G, Z4860G and Z4660G cannot
record sound from headset MIC.  This patch adds the
ALC286_FIXUP_ACER_AIO_HEADSET_MIC quirk to fix this issue.

Fixes: 9f8aefed9623 ("ALSA: hda/realtek: Fix mic issue on Acer AIO Veriton Z4660G")
Fixes: b72f936f6b32 ("ALSA: hda/realtek: Fix mic issue on Acer AIO Veriton Z4860G/Z6860G")
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Reviewed-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2 years agodrm/exynos/mixer: fix MIXER shadow registry synchronisation code
Andrzej Hajda [Tue, 19 Mar 2019 13:05:11 +0000 (14:05 +0100)]
drm/exynos/mixer: fix MIXER shadow registry synchronisation code

MIXER on Exynos5 SoCs uses different synchronisation method than Exynos4
to update internal state (shadow registers).
Apparently the driver implements it incorrectly. The rule should be
as follows:
- do not request updating registers until previous request was finished,
  ie. MXR_CFG_LAYER_UPDATE_COUNT must be 0.
- before setting registers synchronisation on VSYNC should be turned off,
  ie. MXR_STATUS_SYNC_ENABLE should be reset,
- after finishing MXR_STATUS_SYNC_ENABLE should be set again.
The patch hopefully implements it correctly.
Below sample kernel log from page fault caused by the bug:

[   25.670038] exynos-sysmmu 14650000.sysmmu: 14450000.mixer: PAGE FAULT occurred at 0x2247b800
[   25.677888] ------------[ cut here ]------------
[   25.682164] kernel BUG at ../drivers/iommu/exynos-iommu.c:450!
[   25.687971] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM
[   25.693778] Modules linked in:
[   25.696816] CPU: 5 PID: 1553 Comm: fb-release_test Not tainted 5.0.0-rc7-01157-g5f86b1566bdd #136
[   25.705646] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[   25.711710] PC is at exynos_sysmmu_irq+0x1c0/0x264
[   25.716470] LR is at lock_is_held_type+0x44/0x64

v2: added missing MXR_CFG_LAYER_UPDATE bit setting in mixer_enable_sync

Reported-by: Marian Mihailescu <mihailescu2m@gmail.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
2 years agoscsi: ibmvscsi: Fix empty event pool access during host removal
Tyrel Datwyler [Wed, 20 Mar 2019 18:41:51 +0000 (13:41 -0500)]
scsi: ibmvscsi: Fix empty event pool access during host removal

The event pool used for queueing commands is destroyed fairly early in the
ibmvscsi_remove() code path. Since, this happens prior to the call so
scsi_remove_host() it is possible for further calls to queuecommand to be
processed which manifest as a panic due to a NULL pointer dereference as
seen here:

PANIC: "Unable to handle kernel paging request for data at address
0x00000000"

Context process backtrace:

DSISR: 0000000042000000 ????Syscall Result: 0000000000000000
4 [c000000002cb3820] memcpy_power7 at c000000000064204
[Link Register] [c000000002cb3820] ibmvscsi_send_srp_event at d000000003ed14a4
5 [c000000002cb3920] ibmvscsi_send_srp_event at d000000003ed14a4 [ibmvscsi] ?(unreliable)
6 [c000000002cb39c0] ibmvscsi_queuecommand at d000000003ed2388 [ibmvscsi]
7 [c000000002cb3a70] scsi_dispatch_cmd at d00000000395c2d8 [scsi_mod]
8 [c000000002cb3af0] scsi_request_fn at d00000000395ef88 [scsi_mod]
9 [c000000002cb3be0] __blk_run_queue at c000000000429860
10 [c000000002cb3c10] blk_delay_work at c00000000042a0ec
11 [c000000002cb3c40] process_one_work at c0000000000dac30
12 [c000000002cb3cd0] worker_thread at c0000000000db110
13 [c000000002cb3d80] kthread at c0000000000e3378
14 [c000000002cb3e30] ret_from_kernel_thread at c00000000000982c

The kernel buffer log is overfilled with this log:

[11261.952732] ibmvscsi: found no event struct in pool!

This patch reorders the operations during host teardown. Start by calling
the SRP transport and Scsi_Host remove functions to flush any outstanding
work and set the host offline. LLDD teardown follows including destruction
of the event pool, freeing the Command Response Queue (CRQ), and unmapping
any persistent buffers. The event pool destruction is protected by the
scsi_host lock, and the pool is purged prior of any requests for which we
never received a response. Finally, move the removal of the scsi host from
our global list to the end so that the host is easily locatable for
debugging purposes during teardown.

Cc: <stable@vger.kernel.org> # v2.6.12+
Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2 years agoscsi: ibmvscsi: Protect ibmvscsi_head from concurrent modificaiton
Tyrel Datwyler [Wed, 20 Mar 2019 18:41:50 +0000 (13:41 -0500)]
scsi: ibmvscsi: Protect ibmvscsi_head from concurrent modificaiton

For each ibmvscsi host created during a probe or destroyed during a remove
we either add or remove that host to/from the global ibmvscsi_head
list. This runs the risk of concurrent modification.

This patch adds a simple spinlock around the list modification calls to
prevent concurrent updates as is done similarly in the ibmvfc driver and
ipr driver.

Fixes: 32d6e4b6e4ea ("scsi: ibmvscsi: add vscsi hosts to global list_head")
Cc: <stable@vger.kernel.org> # v4.10+
Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2 years agoblkcg: Fix kernel-doc warnings
Bart Van Assche [Wed, 20 Mar 2019 20:18:45 +0000 (13:18 -0700)]
blkcg: Fix kernel-doc warnings

Avoid that the following warnings are reported when building with W=1:

block/blk-cgroup.c:1755: warning: Function parameter or member 'q' not described in 'blkcg_schedule_throttle'
block/blk-cgroup.c:1755: warning: Function parameter or member 'use_memdelay' not described in 'blkcg_schedule_throttle'
block/blk-cgroup.c:1779: warning: Function parameter or member 'blkg' not described in 'blkcg_add_delay'
block/blk-cgroup.c:1779: warning: Function parameter or member 'now' not described in 'blkcg_add_delay'
block/blk-cgroup.c:1779: warning: Function parameter or member 'delta' not described in 'blkcg_add_delay'

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2 years agoblk-iolatency: #include "blk.h"
Bart Van Assche [Wed, 20 Mar 2019 20:15:01 +0000 (13:15 -0700)]
blk-iolatency: #include "blk.h"

This patch avoids that the following warning is reported when building
with W=1:

block/blk-iolatency.c:734:5: warning: no previous prototype for 'blk_iolatency_init' [-Wmissing-prototypes]

Cc: Josef Bacik <jbacik@fb.com>
Fixes: d70675121546 ("block: introduce blk-iolatency io controller") # v4.19
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2 years agoblock: Unexport blk_mq_add_to_requeue_list()
Bart Van Assche [Wed, 20 Mar 2019 20:14:37 +0000 (13:14 -0700)]
block: Unexport blk_mq_add_to_requeue_list()

This function is not used outside the block layer core. Hence unexport it.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2 years agoblock: add BLK_MQ_POLL_CLASSIC for hybrid poll and return EINVAL for unexpected value
Yufen Yu [Mon, 18 Mar 2019 14:44:41 +0000 (22:44 +0800)]
block: add BLK_MQ_POLL_CLASSIC for hybrid poll and return EINVAL for unexpected value

For q->poll_nsec == -1, means doing classic poll, not hybrid poll.
We introduce a new flag BLK_MQ_POLL_CLASSIC to replace -1, which
may make code much easier to read.

Additionally, since val is an int obtained with kstrtoint(), val can be
a negative value other than -1, so return -EINVAL for that case.

Thanks to Damien Le Moal for some good suggestion.

Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2 years agoscsi: hisi_sas: Add softreset in hisi_sas_I_T_nexus_reset()
Luo Jiaxing [Wed, 20 Mar 2019 10:21:34 +0000 (18:21 +0800)]
scsi: hisi_sas: Add softreset in hisi_sas_I_T_nexus_reset()

We found out that for v2 hw, a SATA disk can not be written to after the
system comes up.

In commit ffb1c820b8b6 ("scsi: hisi_sas: remove the check of sas_dev status
in hisi_sas_I_T_nexus_reset()"), we introduced a path where we may issue an
internal abort for a SATA device, but without following it with a
softreset.

We need to always follow an internal abort with a software reset, as per HW
programming flow, so add this.

Fixes: ffb1c820b8b6 ("scsi: hisi_sas: remove the check of sas_dev status in hisi_sas_I_T_nexus_reset()")
Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2 years agoirqchip/gic-v3-its: Fix comparison logic in lpi_range_cmp
Rasmus Villemoes [Tue, 12 Mar 2019 17:33:46 +0000 (18:33 +0100)]
irqchip/gic-v3-its: Fix comparison logic in lpi_range_cmp

The lpi_range_list is supposed to be sorted in ascending order of
->base_id (at least if the range merging is to work), but the current
comparison function returns a positive value if rb->base_id >
ra->base_id, which means that list_sort() will put A after B in that
case - and vice versa, of course.

Fixes: 880cb3cddd16 (irqchip/gic-v3-its: Refactor LPI allocator)
Cc: stable@vger.kernel.org (v4.19+)
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2 years agoMerge tag 'arc-5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Linus Torvalds [Wed, 20 Mar 2019 18:01:52 +0000 (11:01 -0700)]
Merge tag 'arc-5.1-rc2' of git://git./linux/kernel/git/vgupta/arc

Pull ARC updates from Vineet Gupta:

 - unaligned access support for HS cores

 - Removed extra memory barrier around spinlock code

 - HSDK platform updates: enable dmac, reset

 - some more boot logging updates

 - misc minor fixes

* tag 'arc-5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  arch: arc: Kconfig: pedantic formatting
  ARCv2: spinlock: remove the extra smp_mb before lock, after unlock
  ARC: unaligned: relax the check for gcc supporting -mno-unaligned-access
  ARC: boot log: cut down on verbosity
  ARCv2: boot log: refurbish HS core/release identification
  arc: hsdk_defconfig: Enable CONFIG_BLK_DEV_RAM
  ARC: u-boot args: check that magic number is correct
  ARC: perf: bpok condition only exists for ARCompact
  ARCv2: Add explcit unaligned access support (and ability to disable too)
  ARCv2: lib: introduce memcpy optimized for unaligned access
  ARC: [plat-hsdk]: Enable AXI DW DMAC support
  ARC: [plat-hsdk]: Add reset controller handle to manage USB reset
  ARC: DTB: [scripted] fix node name and address spelling

2 years agoarm64: remove obsolete selection of MULTI_IRQ_HANDLER
Matthias Kaehlcke [Wed, 20 Mar 2019 17:20:56 +0000 (10:20 -0700)]
arm64: remove obsolete selection of MULTI_IRQ_HANDLER

The arm64 config selects MULTI_IRQ_HANDLER, which was renamed to
GENERIC_IRQ_MULTI_HANDLER by commit 4c301f9b6a94 ("ARM: Convert
to GENERIC_IRQ_MULTI_HANDLER"). The 'new' option is already
selected, so just remove the obsolete entry.

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2 years agorbd: drop wait_for_latest_osdmap()
Ilya Dryomov [Wed, 20 Mar 2019 09:58:05 +0000 (10:58 +0100)]
rbd: drop wait_for_latest_osdmap()

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
2 years agolibceph: wait for latest osdmap in ceph_monc_blacklist_add()
Ilya Dryomov [Wed, 20 Mar 2019 08:46:58 +0000 (09:46 +0100)]
libceph: wait for latest osdmap in ceph_monc_blacklist_add()

Because map updates are distributed lazily, an OSD may not know about
the new blacklist for quite some time after "osd blacklist add" command
is completed.  This makes it possible for a blacklisted but still alive
client to overwrite a post-blacklist update, resulting in data
corruption.

Waiting for latest osdmap in ceph_monc_blacklist_add() and thus using
the post-blacklist epoch for all post-blacklist requests ensures that
all such requests "wait" for the blacklist to come into force on their
respective OSDs.

Cc: stable@vger.kernel.org
Fixes: 6305a3b41515 ("libceph: support for blacklisting clients")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
2 years agopowerpc/mm: Only define MAX_PHYSMEM_BITS in SPARSEMEM configurations
Ben Hutchings [Sun, 17 Mar 2019 01:17:56 +0000 (01:17 +0000)]
powerpc/mm: Only define MAX_PHYSMEM_BITS in SPARSEMEM configurations

MAX_PHYSMEM_BITS only needs to be defined if CONFIG_SPARSEMEM is
enabled, and that was the case before commit 4ffe713b7587
("powerpc/mm: Increase the max addressable memory to 2PB").

On 32-bit systems, where CONFIG_SPARSEMEM is not enabled, we now
define it as 46.  That is larger than the real number of physical
address bits, and breaks calculations in zsmalloc:

  mm/zsmalloc.c:130:49: warning: right shift count is negative
    MAX(32, (ZS_MAX_PAGES_PER_ZSPAGE << PAGE_SHIFT >> OBJ_INDEX_BITS))
                                                   ^~
  ...
  mm/zsmalloc.c:253:21: error: variably modified 'size_class' at file scope
    struct size_class *size_class[ZS_SIZE_CLASSES];
                       ^~~~~~~~~~

Fixes: 4ffe713b7587 ("powerpc/mm: Increase the max addressable memory to 2PB")
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2 years agodrm/vmwgfx: Don't double-free the mode stored in par->set_mode
Thomas Zimmermann [Mon, 18 Mar 2019 14:47:58 +0000 (15:47 +0100)]
drm/vmwgfx: Don't double-free the mode stored in par->set_mode

When calling vmw_fb_set_par(), the mode stored in par->set_mode gets free'd
twice. The first free is in vmw_fb_kms_detach(), the second is near the
end of vmw_fb_set_par() under the name of 'old_mode'. The mode-setting code
only works correctly if the mode doesn't actually change. Removing
'old_mode' in favor of using par->set_mode directly fixes the problem.

Cc: <stable@vger.kernel.org>
Fixes: a278724aa23c ("drm/vmwgfx: Implement fbdev on kms v2")
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>