muen/linux.git
6 years agodrm/nouveau/gm204/6: add voltage control using the new gk104 volt class
Martin Peres [Wed, 16 Sep 2015 19:45:33 +0000 (22:45 +0300)]
drm/nouveau/gm204/6: add voltage control using the new gk104 volt class

I got confirmation that we can read and change the voltage with the same code.
The divider is also computed correctly on the gm204 we got our hands on.

Thanks to Yoshimo on IRC for executing the tests on his gm204!

Signed-off-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
6 years agodrm/nouveau/gm107: add voltage control using the new gk104 volt class
Martin Peres [Wed, 9 Sep 2015 00:13:30 +0000 (02:13 +0200)]
drm/nouveau/gm107: add voltage control using the new gk104 volt class

Let's ignore the other desktop Maxwells until I get my hands on one and confirm
that we still can change the voltage.

Signed-off-by: Martin Peres <martin.peres@free.fr>
6 years agodrm/nouveau/volt/gk104: add support for pwm and gpio modes
Martin Peres [Tue, 8 Sep 2015 22:34:33 +0000 (00:34 +0200)]
drm/nouveau/volt/gk104: add support for pwm and gpio modes

Most Keplers actually use the GPIO-based voltage management instead of the new
PWM-based one. Use the GPIO mode as a fallback as it already gracefully handles
the case where no GPIOs exist.

All the Maxwells seem to use the PWM method though.

v2:
 - Do not forget to commit the PWM configuration change!

Signed-off-by: Martin Peres <martin.peres@free.fr>
6 years agodrm/nouveau/volt: add support for non-vid-based voltage controllers
Martin Peres [Wed, 9 Sep 2015 01:05:51 +0000 (04:05 +0300)]
drm/nouveau/volt: add support for non-vid-based voltage controllers

This patch is not ideal but it definitely beats a rewrite of the current
interface and is very self-contained.

Signed-off-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
6 years agodrm/nouveau/bios/volt: add support for pwm-based volt management
Martin Peres [Wed, 9 Sep 2015 01:05:50 +0000 (04:05 +0300)]
drm/nouveau/bios/volt: add support for pwm-based volt management

Signed-off-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
6 years agodrm/nouveau/ttm: set the DMA mask for platform devices
Alexandre Courbot [Fri, 4 Sep 2015 10:59:34 +0000 (19:59 +0900)]
drm/nouveau/ttm: set the DMA mask for platform devices

So far the DMA mask was not set for platform devices, which limited them
to a 32-bit physical space. Allow dma_set_mask() to be called for
non-PCI devices, and also take the IOMMU bit into account since it could
restrict the physically addressable space.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
6 years agodrm/nouveau/ttm: convert to DMA API
Alexandre Courbot [Fri, 4 Sep 2015 10:59:33 +0000 (19:59 +0900)]
drm/nouveau/ttm: convert to DMA API

The pci_dma_* functions are now superseeded in the kernel by the DMA
API. Make the conversion to this more generic API.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
6 years agodrm/nouveau/instmem/gk20a: make use of the IOMMU bit
Alexandre Courbot [Fri, 4 Sep 2015 10:59:32 +0000 (19:59 +0900)]
drm/nouveau/instmem/gk20a: make use of the IOMMU bit

Use the IOMMU bit specified in platform data instead of hardcoding it to
the bit used by current Tegra GPUs.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
6 years agodrm/nouveau/platform: allow to specify the IOMMU bit
Alexandre Courbot [Fri, 4 Sep 2015 10:59:31 +0000 (19:59 +0900)]
drm/nouveau/platform: allow to specify the IOMMU bit

Current Tegra code taking advantage of the IOMMU assumes a hardcoded
value for the IOMMU bit. Make it a platform property instead for
flexibility.

v2 (Ben Skeggs): remove nvkm dependence on drm structures

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
6 years agodrm/nouveau/instmem/gk20a: use direct CPU access
Alexandre Courbot [Fri, 4 Sep 2015 10:52:11 +0000 (19:52 +0900)]
drm/nouveau/instmem/gk20a: use direct CPU access

The Great Nouveau Refactoring Take II brought us a lot of goodness,
including acquire/release methods that are called before and after an
instobj is modified. These functions can be used as synchronization
points to manage CPU/GPU coherency if we modify an instobj using the
CPU.

This patch replaces the legacy and slow PRAMIN access for gk20a instmem
with CPU mappings and writes. A LRU list is used to unmap unused
mappings after a certain threshold (currently 1MB) of mapped instobjs is
reached. This allows mappings to be reused most of the time.

Accessing instobjs using the CPU requires to maintain the GPU L2 cache,
which we do in the acquire/release functions. This triggers a lot of L2
flushes/invalidates, but most of them are performed on an empty cache
(and thus return immediately), and overall context setup performance
greatly benefits from this (from 250ms to 160ms on Jetson TK1 for a
simple libdrm program).

Making L2 management more explicit should allow us to grab some more
performance in the future.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
6 years agodrm/nouveau: remove unnecessary usage of object handles
Ben Skeggs [Fri, 4 Sep 2015 04:40:32 +0000 (14:40 +1000)]
drm/nouveau: remove unnecessary usage of object handles

No longer required in a lot of cases, as objects are identified over NVIF
via an alternate mechanism since the rework.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
6 years agodrm/nouveau/ltc/gf100: add flush/invalidate functions
Alexandre Courbot [Thu, 3 Sep 2015 08:48:15 +0000 (17:48 +0900)]
drm/nouveau/ltc/gf100: add flush/invalidate functions

Allow clients to manually flush and invalidate L2. This will be useful
for Tegra systems for which we want to write instmem using the CPU.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
6 years agodrm/nouveau/ltc: add hooks for invalidate and flush
Alexandre Courbot [Thu, 3 Sep 2015 08:48:14 +0000 (17:48 +0900)]
drm/nouveau/ltc: add hooks for invalidate and flush

These are useful for systems without a coherent CPU/GPU bus. For such
systems we may need to maintain the L2 ourselves.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
6 years agodrm/nouveau/timer: re-introduce nvkm_wait_xsec macros
Alexandre Courbot [Thu, 3 Sep 2015 08:48:13 +0000 (17:48 +0900)]
drm/nouveau/timer: re-introduce nvkm_wait_xsec macros

Reintroduce macros allowing us to test a register against a certain
mask, since this is the most common usage pattern for the more generic
nvkm_xsec macros and makes the code more concise and readable.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
6 years agodrm/nouveau/pmu: do not assume a PMU is present
Alexandre Courbot [Thu, 3 Sep 2015 08:39:52 +0000 (17:39 +0900)]
drm/nouveau/pmu: do not assume a PMU is present

Some devices may not have a PMU. Avoid a NULL pointer dereference in
such cases by checking whether the pointer given to nvkm_pmu_pgob() is
valid.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
6 years agodrm/nouveau/gem: return only valid domain when there's only one
Ilia Mirkin [Tue, 20 Oct 2015 05:15:39 +0000 (01:15 -0400)]
drm/nouveau/gem: return only valid domain when there's only one

On nv50+, we restrict the valid domains to just the one where the buffer
was originally created. However after the buffer is evicted to system
memory, we might move it back to a different domain that was not
originally valid. When sharing the buffer and retrieving its GEM_INFO
data, we still want the domain that will be valid for this buffer in a
pushbuf, not the one where it currently happens to be.

This resolves fdo#92504 and several others. These are due to suspend
evicting all buffers, making it more likely that they temporarily end up
in the wrong place.

Cc: stable@vger.kernel.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92504
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
6 years agoMerge tag 'topic/drm-misc-2015-10-22' of git://anongit.freedesktop.org/drm-intel...
Dave Airlie [Thu, 29 Oct 2015 23:49:06 +0000 (09:49 +1000)]
Merge tag 'topic/drm-misc-2015-10-22' of git://anongit.freedesktop.org/drm-intel into drm-next

Few more drm-misc stragglers for 4.4. Big thing is the generic probe for
imx/rockchip/armada (but the variant for msm/rpi/exynos is still missing).

Also the hdmi clocking fixes from Ville which was a lot of confusion about
which tree it should be applied to ;-)

* tag 'topic/drm-misc-2015-10-22' of git://anongit.freedesktop.org/drm-intel:
  drm: correctly check failed allocation
  vga_switcheroo: Constify vga_switcheroo_handler
  drm/armada: Convert the probe function to the generic drm_of_component_probe()
  drm/rockchip: Convert the probe function to the generic drm_of_component_probe()
  drm/imx: Convert the probe function to the generic drm_of_component_probe()
  drm: Introduce generic probe function for component based masters.
  drm/edid: Round to closest when computing the CEA/HDMI alternate clock
  drm/edid: Fix up clock for CEA/HDMI modes specified via detailed timings

6 years agoMerge branch 'drm-next-4.4' of git://people.freedesktop.org/~agd5f/linux into drm...
Dave Airlie [Thu, 29 Oct 2015 23:48:28 +0000 (09:48 +1000)]
Merge branch 'drm-next-4.4' of git://people.freedesktop.org/~agd5f/linux into drm-next

More amdgpu and radeon stuff for drm-next.  Stoney support is the big change.
The rest is just bug fixes and code cleanups.  The Stoney stuff is pretty
low impact with respect to existing chips.

* 'drm-next-4.4' of git://people.freedesktop.org/~agd5f/linux:
  drm/amdgpu: change VM size default to 64GB
  drm/amdgpu: add Stoney pci ids
  drm/amdgpu: update the core VI support for Stoney
  drm/amdgpu: add VCE support for Stoney (v2)
  drm/amdgpu: add UVD support for Stoney
  drm/amdgpu: add GFX support for Stoney (v2)
  drm/amdgpu: add SDMA support for Stoney (v2)
  drm/amdgpu: add DCE support for Stoney
  drm/amdgpu: Update SMC/DPM for Stoney
  drm/amdgpu: add GMC support for Stoney
  drm/amdgpu: add Stoney chip family
  drm/amdgpu: fix the broken vm->mutex V2
  drm/amdgpu: remove the unnecessary parameter adev for amdgpu_fence_wait_any()
  drm/amdgpu: remove the exclusive lock
  drm/amdgpu: remove old lockup detection infrastructure
  drm: fix trivial typos
  drm/amdgpu/dce: simplify suspend/resume
  drm/amdgpu/gfx8: set TC_WB_ACTION_EN in RELEASE_MEM packet
  drm/radeon: Use rdev->gem.mutex to protect hyperz/cmask owners

6 years agoMerge tag 'drm-intel-next-fixes-2015-10-22' of git://anongit.freedesktop.org/drm...
Dave Airlie [Thu, 29 Oct 2015 23:45:33 +0000 (09:45 +1000)]
Merge tag 'drm-intel-next-fixes-2015-10-22' of git://anongit.freedesktop.org/drm-intel into drm-next

Bunch of -fixes for 4.4. Well not just, I've left the mmio/register work
from Ville in here since it's low-risk but lots of churn all over.

* tag 'drm-intel-next-fixes-2015-10-22' of git://anongit.freedesktop.org/drm-intel: (23 commits)
  drm/i915: Use round to closest when computing the CEA 1.001 pixel clocks
  drm/i915: Kill the leftover RMW from ivb_sprite_disable()
  drm/i915: restore ggtt double-bind avoidance
  drm/i915/skl: Enable pipe gamma for sprite planes.
  drm/i915/skl+: Enable pipe CSC on cursor planes. (v2)
  MAINTAINERS: add link to the Intel Graphics for Linux web site
  drm/i915: Move skl/bxt gt specific workarounds to ring init
  drm/i915: Drop i915_gem_obj_is_pinned() from set-cache-level
  drm/i915: revert a few more watermark commits
  drm/i915: Remove dev_priv argument from NEEDS_FORCE_WAKE
  drm/i915: Clean up LVDS register handling
  drm/i915: Throw out some useless variables
  drm/i915: Parametrize and fix SWF registers
  drm/i915: s/PIPE_FRMCOUNT_GM45/PIPE_FRMCOUNT_G4X/ etc.
  drm/i915: Turn GEN5_ASSERT_IIR_IS_ZERO() into a function
  drm/i915: Fix a few bad hex numbers in register defines
  drm/i915: Protect register macro arguments
  drm/i915: Include gpio_mmio_base in GMBUS reg defines
  drm/i915: Parametrize HSW video DIP data registers
  drm/i915: Eliminate weird parameter inversion from BXT PPS registers
  ...

6 years agoMerge branch 'msm-next' of git://people.freedesktop.org/~robclark/linux into drm...
Dave Airlie [Fri, 23 Oct 2015 01:54:03 +0000 (11:54 +1000)]
Merge branch 'msm-next' of git://people.freedesktop.org/~robclark/linux into drm-next

A bit smaller pull this time.  Few minor things, plus initial support
for msm8996 (snapdragon 820)..  Sorry, a bit latish, was hoping to get
some 8960/8064 DSI stuff included.  But still waiting on the v2 of the
patchset (just pending some minor review comments).  It would be nice
to get the DSI patches merged since it would help some folks trying to
get upstream kernel running on n4/n7 and xperia z and wanting to write
some more panel drivers.  Also, waiting for OCMEM driver to get merged
via other trees and then I have a small bit to go along with that to
make the gpu actually work on devices w/ OCMEM (snapdragon 800, 805,
etc).  So maybe a second later pull req, time permitting.

* 'msm-next' of git://people.freedesktop.org/~robclark/linux:
  drm/msm: Remove local fbdev emulation Kconfig option
  drm/msm/mdp5: Basic support for MDP5 v1.7 (MSM8996)
  drm/msm/mdp: Add Software Pixel Extension support
  drm/msm/mdp5: Use the newly introduced enum mdp_component_type
  drm/msm/hdmi: Add basic HDMI support for msm8996
  drm/msm/mdp5: Avoid printing error messages for optional clocks
  drm/msm: Fix IOMMU clean up path in case msm_iommu_new() fails
  drm/msm/mdp5: remove the cfg pointer from SMP struct
  drm/msm/dsi: Updata LNn_CFG4 register settings for 28nm PHY
  drm: msm: dsi: Don't attempt changing voltage of switches
  drm/msm: update generated headers

6 years agodrm/msm: Remove local fbdev emulation Kconfig option
Archit Taneja [Mon, 13 Jul 2015 06:42:07 +0000 (12:12 +0530)]
drm/msm: Remove local fbdev emulation Kconfig option

DRM_MSM_FBDEV config is used to enable/disable fbdev emulation for the
msm kms driver.

Replace this with the top level DRM_FBDEV_EMULATION config option where
applicable. This also prevents build breaks caused by undefined
drm_fb_helper_* functions when legacy fbdev support was disabled.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
6 years agodrm/msm/mdp5: Basic support for MDP5 v1.7 (MSM8996)
Stephane Viau [Tue, 15 Sep 2015 12:41:53 +0000 (08:41 -0400)]
drm/msm/mdp5: Basic support for MDP5 v1.7 (MSM8996)

This change adds the basic MDP5 support for MSM8996.

Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
6 years agodrm/msm/mdp: Add Software Pixel Extension support
Stephane Viau [Tue, 15 Sep 2015 12:41:52 +0000 (08:41 -0400)]
drm/msm/mdp: Add Software Pixel Extension support

In order to produce an image, the scalar needs to be fed extra
pixels. These top/bottom/left/right values depend on a various of
factors, including resolution, scaling type, phase step and
initial phase.

Pixel Extension are programmed by hardware in most targets - and
can be overwritten by software. For some targets (e.g.: msm8996),
software *must* program those registers.

In order to ease this computation, let's always use bilinear
filters, which are easier to program from kernel. Eventually,
all of these values will come down from user space for better
quality.

Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
6 years agodrm/msm/mdp5: Use the newly introduced enum mdp_component_type
Stephane Viau [Tue, 15 Sep 2015 12:41:51 +0000 (08:41 -0400)]
drm/msm/mdp5: Use the newly introduced enum mdp_component_type

When calculating phase steps, let's use the same enum
mdp_component_type in order to ease the readability; 0/1 indexes
are a bit confusing and we now have explicit values to index
this type of arrays.

Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
6 years agodrm/msm/hdmi: Add basic HDMI support for msm8996
Stephane Viau [Tue, 15 Sep 2015 12:41:49 +0000 (08:41 -0400)]
drm/msm/hdmi: Add basic HDMI support for msm8996

The HDMI controller is new in MDP5 v1.7. As of now, this change
doesn't reflect the novelty and only adds the basics so the probe
gets triggered.

Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
6 years agodrm/msm/mdp5: Avoid printing error messages for optional clocks
Stephane Viau [Tue, 15 Sep 2015 12:41:47 +0000 (08:41 -0400)]
drm/msm/mdp5: Avoid printing error messages for optional clocks

The current behavior is to try to get optional clocks and print a
dev_err message in case of failure. This looks rather confusing
and may increase with the amount of optional clocks.

We may need a cleaner way to handle per-device clocks but in the
meantime, let's reduce the amount of dev_err messages during the
probe.

Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
6 years agodrm/msm: Fix IOMMU clean up path in case msm_iommu_new() fails
Stephane Viau [Tue, 15 Sep 2015 12:41:46 +0000 (08:41 -0400)]
drm/msm: Fix IOMMU clean up path in case msm_iommu_new() fails

msm_iommu_new() can fail and this change makes sure that we
detect the failure and free the allocated domain before going
any further.

Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
6 years agodrm/msm/mdp5: remove the cfg pointer from SMP struct
Stephane Viau [Tue, 15 Sep 2015 12:41:44 +0000 (08:41 -0400)]
drm/msm/mdp5: remove the cfg pointer from SMP struct

We want to make sure we control all the information being passed
down to SMP block. Having access to the cfg pointer here may create
bad things in the future.

Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
6 years agodrm/msm/dsi: Updata LNn_CFG4 register settings for 28nm PHY
Hai Li [Fri, 11 Sep 2015 19:56:09 +0000 (15:56 -0400)]
drm/msm/dsi: Updata LNn_CFG4 register settings for 28nm PHY

The current settings for 28nm PHY data lane CFG4 registers do
not work with certain panels. This change is to modify them to
hw recommended values.

Signed-off-by: Hai Li <hali@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
6 years agodrm: msm: dsi: Don't attempt changing voltage of switches
Bjorn Andersson [Tue, 18 Aug 2015 17:34:32 +0000 (10:34 -0700)]
drm: msm: dsi: Don't attempt changing voltage of switches

In some configurations the supplies are voltage switches and not LDOs,
making the set voltage call to fail. Check with the regulator framework
if the supply can change voltage before attempting.

Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
6 years agodrm/msm: update generated headers
Rob Clark [Thu, 22 Oct 2015 16:36:57 +0000 (12:36 -0400)]
drm/msm: update generated headers

Signed-off-by: Rob Clark <robdclark@gmail.com>
6 years agoMerge branch 'drm/next/du' of git://linuxtv.org/pinchartl/fbdev into drm-next
Dave Airlie [Thu, 22 Oct 2015 00:31:43 +0000 (10:31 +1000)]
Merge branch 'drm/next/du' of git://linuxtv.org/pinchartl/fbdev into drm-next

rcar-du support for r8a7793/4
* 'drm/next/du' of git://linuxtv.org/pinchartl/fbdev:
  drm: rcar-du: Add support for the R8A7794 DU
  drm: rcar-du: Add support for the R8A7793 DU

6 years agoMerge tag 'drm-vc4-next-2015-10-21' of http://github.com/anholt/linux into drm-next
Dave Airlie [Thu, 22 Oct 2015 00:23:31 +0000 (10:23 +1000)]
Merge tag 'drm-vc4-next-2015-10-21' of github.com/anholt/linux into drm-next

This pull request introduces the vc4 driver, for kernel modesetting on
the Raspberry Pi (bcm2835/bcm2836 architectures).  It currently
supports a display plane and cursor on the HDMI output.  The driver
doesn't do 3D, power management, or overlay planes yet.

[airlied: fixup the enable/disable vblank APIs]

Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
* tag 'drm-vc4-next-2015-10-21' of http://github.com/anholt/linux:
  drm/vc4: Allow vblank to be disabled
  drm/vc4: Use the fbdev_cma helpers
  drm/vc4: Add KMS support for Raspberry Pi.
  drm/vc4: Add devicetree bindings for VC4.

6 years agodrm/amdgpu: change VM size default to 64GB
Christian König [Thu, 15 Oct 2015 15:34:20 +0000 (17:34 +0200)]
drm/amdgpu: change VM size default to 64GB

That's still small enough to not waste to much memory on PD/PTs.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
6 years agodrm/amdgpu: add Stoney pci ids
Samuel Li [Thu, 8 Oct 2015 20:32:03 +0000 (16:32 -0400)]
drm/amdgpu: add Stoney pci ids

Signed-off-by: Samuel Li <samuel.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
6 years agodrm/amdgpu: update the core VI support for Stoney
Samuel Li [Thu, 8 Oct 2015 20:31:43 +0000 (16:31 -0400)]
drm/amdgpu: update the core VI support for Stoney

Add core VI enablement for Stoney.

Signed-off-by: Samuel Li <samuel.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
6 years agodrm/amdgpu: add VCE support for Stoney (v2)
Samuel Li [Thu, 8 Oct 2015 20:27:55 +0000 (16:27 -0400)]
drm/amdgpu: add VCE support for Stoney (v2)

Stoney is VCE 3.x single.

v2: Stoney is single pipe like Fiji

Signed-off-by: Samuel Li <samuel.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
6 years agodrm/amdgpu: add UVD support for Stoney
Samuel Li [Thu, 8 Oct 2015 20:27:21 +0000 (16:27 -0400)]
drm/amdgpu: add UVD support for Stoney

Stoney is UVD 6.x.

Signed-off-by: Samuel Li <samuel.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
6 years agodrm/amdgpu: add GFX support for Stoney (v2)
Samuel Li [Thu, 8 Oct 2015 20:29:40 +0000 (16:29 -0400)]
drm/amdgpu: add GFX support for Stoney (v2)

Stoney is GFX 8.1.

v2: update to latest golden settings

Signed-off-by: Samuel Li <samuel.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
6 years agodrm/amdgpu: add SDMA support for Stoney (v2)
Samuel Li [Thu, 8 Oct 2015 21:17:51 +0000 (17:17 -0400)]
drm/amdgpu: add SDMA support for Stoney (v2)

Stoney is SDMA 3.x.

v2: update to latest golden register settings

Signed-off-by: Samuel Li <samuel.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
6 years agodrm/amdgpu: add DCE support for Stoney
Samuel Li [Thu, 8 Oct 2015 20:29:06 +0000 (16:29 -0400)]
drm/amdgpu: add DCE support for Stoney

Stoney is DCE 11.x.

Signed-off-by: Samuel Li <samuel.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
6 years agodrm/amdgpu: Update SMC/DPM for Stoney
Samuel Li [Thu, 8 Oct 2015 20:28:41 +0000 (16:28 -0400)]
drm/amdgpu: Update SMC/DPM for Stoney

Stoney is SMC 8.x.

Signed-off-by: Samuel Li <samuel.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
6 years agodrm/amdgpu: add GMC support for Stoney
Samuel Li [Thu, 8 Oct 2015 20:26:41 +0000 (16:26 -0400)]
drm/amdgpu: add GMC support for Stoney

Stoney is GMC 8.x.

Signed-off-by: Samuel Li <samuel.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
6 years agodrm/amdgpu: add Stoney chip family
Samuel Li [Thu, 8 Oct 2015 18:50:27 +0000 (14:50 -0400)]
drm/amdgpu: add Stoney chip family

Stoney is based on Carrizo with some IP upgrades.

Signed-off-by: Samuel Li <samuel.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
6 years agodrm: rcar-du: Add support for the R8A7794 DU
Laurent Pinchart [Fri, 17 Jul 2015 07:44:33 +0000 (10:44 +0300)]
drm: rcar-du: Add support for the R8A7794 DU

The R8A7794 DU has a fixed output routing configuration with one RGB
output per CRTC and thus lacks the RGB output routing register field.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
6 years agodrm: rcar-du: Add support for the R8A7793 DU
Laurent Pinchart [Fri, 17 Jul 2015 07:44:33 +0000 (10:44 +0300)]
drm: rcar-du: Add support for the R8A7793 DU

The R8A7793 DU is identical to the R8A7791 and thus only requires a new
DT compatible string.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
6 years agodrm/amdgpu: fix the broken vm->mutex V2
Chunming Zhou [Fri, 16 Oct 2015 06:06:19 +0000 (14:06 +0800)]
drm/amdgpu: fix the broken vm->mutex V2

fix the vm->mutex and ww_mutex confilcts.
vm->mutex is always token first, then ww_mutex.

V2: remove unneccessary checking for pt bo.

Change-Id: Iea56e183752c02831126d06d2f5b7a474a6e4743
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
6 years agodrm/amdgpu: remove the unnecessary parameter adev for amdgpu_fence_wait_any()
Junwei Zhang [Sun, 6 Sep 2015 05:55:03 +0000 (13:55 +0800)]
drm/amdgpu: remove the unnecessary parameter adev for amdgpu_fence_wait_any()

Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
6 years agodrm/amdgpu: remove the exclusive lock
Christian König [Tue, 1 Sep 2015 13:13:53 +0000 (15:13 +0200)]
drm/amdgpu: remove the exclusive lock

Finally getting rid of it.

Signed-off-by: Christian König <christian.koenig@amd.com>
6 years agodrm/amdgpu: remove old lockup detection infrastructure
Christian König [Tue, 1 Sep 2015 08:50:26 +0000 (10:50 +0200)]
drm/amdgpu: remove old lockup detection infrastructure

It didn't worked to well anyway.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
6 years agodrm: fix trivial typos
Geliang Tang [Sun, 18 Oct 2015 15:29:48 +0000 (23:29 +0800)]
drm: fix trivial typos

s/regsiter/register/

Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
6 years agodrm/vc4: Allow vblank to be disabled
Derek Foreman [Thu, 2 Jul 2015 16:20:21 +0000 (11:20 -0500)]
drm/vc4: Allow vblank to be disabled

Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
6 years agodrm/vc4: Use the fbdev_cma helpers
Derek Foreman [Thu, 2 Jul 2015 16:19:54 +0000 (11:19 -0500)]
drm/vc4: Use the fbdev_cma helpers

Keep the fbdev_cma pointer around so we can use it on hotplog and close
to ensure the frame buffer console is in a useful state.

Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
6 years agodrm/vc4: Add KMS support for Raspberry Pi.
Eric Anholt [Mon, 2 Mar 2015 21:01:12 +0000 (13:01 -0800)]
drm/vc4: Add KMS support for Raspberry Pi.

This is enough for fbcon and bringing up X using
xf86-video-modesetting.  It doesn't support the 3D accelerator or
power management yet.

v2: Drop FB_HELPER select thanks to Archit's patches.  Do manual init
    ordering instead of using the .load hook.  Structure registration
    more like tegra's, but still using the typical "component" code.
    Drop no-op hooks for atomic_begin and mode_fixup() now that
    they're optional.  Drop sentinel in Makefile.  Fix minor style
    nits I noticed on another reread.

v3: Use the new bcm2835 clk driver to manage pixel/HSM clocks instead
    of having a fixed video mode.  Use exynos-style component driver
    matching instead of devicetree nodes to list the component driver
    instances.  Rename compatibility strings to say bcm2835, and
    distinguish pv0/1/2.  Clean up some h/vsync code, and add in
    interlaced mode setup.  Fix up probe/bind error paths.  Use
    bitops.h macros for vc4_regs.h

v4: Include i2c.h, allow building under COMPILE_TEST, drop msleep now
    that other bugs have been fixed, add timeouts to cpu_relax()
    loops, rename hpd-gpio to hpd-gpios.

Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
6 years agodrm/vc4: Add devicetree bindings for VC4.
Eric Anholt [Tue, 11 Aug 2015 20:17:11 +0000 (13:17 -0700)]
drm/vc4: Add devicetree bindings for VC4.

VC4 is the GPU (display and 3D) subsystem present on the 2835 and some
other Broadcom SoCs.

This binding follows the model of msm, imx, sti, and others, where
there is a subsystem node for the whole GPU, with nodes for the
individual HW components within it.

v2: Extend the commit message, fix several nits from Stephen Warren.
v3: Rename the compatibility strings, clean up node names, drop the
    unnecessary lists of components.  Use compatibility strings for
    choosing CRTC HVS channel numbers.  Document the HDMI clock usage.
v4: Whitespace fix, expand acronyms, move to display/ instead of gpu/,
    rename "hpd-gpio" to "hpd-gpios".

Signed-off-by: Eric Anholt <eric@anholt.net>
6 years agodrm: correctly check failed allocation
Insu Yun [Mon, 19 Oct 2015 16:33:30 +0000 (16:33 +0000)]
drm: correctly check failed allocation

drm_property_create_range can be failed in memory pressure
Therefore, check return value and handle an error

Signed-off-by: Insu Yun <wuninsu@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
6 years agovga_switcheroo: Constify vga_switcheroo_handler
Lukas Wunner [Sun, 18 Oct 2015 11:05:40 +0000 (13:05 +0200)]
vga_switcheroo: Constify vga_switcheroo_handler

vga_switcheroo_client_ops has always been declared const since its
introduction with 26ec685ff9d9 ("vga_switcheroo: Introduce struct
vga_switcheroo_client_ops").

Do so for vga_switcheroo_handler as well.

 drivers/gpu/drm/amd/amdgpu/amdgpu.ko:
   6 .rodata       00009888
- 19 .data         00001f00
+ 19 .data         00001ee0
 drivers/gpu/drm/nouveau/nouveau.ko:
   6 .rodata       000460b8
  17 .data         00018fe0
 drivers/gpu/drm/radeon/radeon.ko:
-  7 .rodata       00030944
+  7 .rodata       00030964
- 21 .data         0000d6a0
+ 21 .data         0000d678
 drivers/platform/x86/apple-gmux.ko:
-  7 .rodata       00000140
+  7 .rodata       00000160
- 11 .data         000000e0
+ 11 .data         000000b8

Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Darren Hart <dvhart@linux.intel.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Christian König <christian.koenig@amd.com>.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
6 years agodrm/armada: Convert the probe function to the generic drm_of_component_probe()
Liviu Dudau [Tue, 20 Oct 2015 09:23:15 +0000 (10:23 +0100)]
drm/armada: Convert the probe function to the generic drm_of_component_probe()

The armada DRM driver keeps some old platform data compatibility in the
probe function that makes moving to the generic drm_of_component_probe()
a bit more complicated that it should. Refactor the probe function to do
the platform_data processing after the generic probe (and only if that
fails). This way future cleanup can further remove support for it.

Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1445332995-11212-5-git-send-email-Liviu.Dudau@arm.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
6 years agodrm/rockchip: Convert the probe function to the generic drm_of_component_probe()
Liviu Dudau [Tue, 20 Oct 2015 09:23:14 +0000 (10:23 +0100)]
drm/rockchip: Convert the probe function to the generic drm_of_component_probe()

Use the generic drm_of_component_probe() function to probe for components.

Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1445332995-11212-4-git-send-email-Liviu.Dudau@arm.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
6 years agodrm/imx: Convert the probe function to the generic drm_of_component_probe()
Liviu Dudau [Tue, 20 Oct 2015 09:23:13 +0000 (10:23 +0100)]
drm/imx: Convert the probe function to the generic drm_of_component_probe()

The generic function is functionally equivalent to the driver's
imx_drm_platform_probe(). Use the generic function and reduce the
overall code size.

Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1445332995-11212-3-git-send-email-Liviu.Dudau@arm.com
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
6 years agodrm: Introduce generic probe function for component based masters.
Liviu Dudau [Tue, 20 Oct 2015 09:23:12 +0000 (10:23 +0100)]
drm: Introduce generic probe function for component based masters.

A lot of component based DRM drivers use a variant of the same code
as the probe function. They bind the crtc ports in the first iteration
and then scan through the child nodes and bind the encoders attached
to the remote endpoints. Factor the common code into a separate
function called drm_of_component_probe() in order to increase code
reuse.

Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1445332995-11212-2-git-send-email-Liviu.Dudau@arm.com
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
6 years agodrm/edid: Round to closest when computing the CEA/HDMI alternate clock
Ville Syrjälä [Thu, 8 Oct 2015 08:43:33 +0000 (11:43 +0300)]
drm/edid: Round to closest when computing the CEA/HDMI alternate clock

Rounding to the closest kHz seems like the better option that round
down or up when computing the alternate clock for CEA/HDMI modes.
It'll give us a slightly more accurate clock in some cases.

Not sure why I went for the down+up approach originally. Perhaps
I was thinking we can go back and forth betwen the two frequencies
without introducing errors, but round to closest still maintains
that property.

Cc: Adam Jackson <ajax@redhat.com>
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Cc: Libin Yang <libin.yang@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
6 years agodrm/edid: Fix up clock for CEA/HDMI modes specified via detailed timings
Ville Syrjälä [Thu, 8 Oct 2015 08:43:32 +0000 (11:43 +0300)]
drm/edid: Fix up clock for CEA/HDMI modes specified via detailed timings

EDID detailed timings have a resolution of 10kHz for the pixel clock, so
they can't represent certain CEA/HDMI modes accurately. If we see a mode
coming in via detailed timings which otherwise matches one of the
CEA/HDMI modes except the clock is just a bit off, let's assume that the
intention was for that mode to be one of the CEA/HDMI modes and go ahead
and fix up the clock to match the CEA/HDMI spec exactly (well, as close
as we can get with the 1 kHz resolution we use).

This should help code that's looking for an exact clock match (eg. i915
audio N/CTS setup).

Cc: Adam Jackson <ajax@redhat.com>
Cc: Clint Taylor <clinton.a.taylor@intel.com>
Cc: Libin Yang <libin.yang@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
6 years agoMerge tag 'topic/drm-misc-2015-10-19' of git://anongit.freedesktop.org/drm-intel...
Dave Airlie [Mon, 19 Oct 2015 23:01:49 +0000 (09:01 +1000)]
Merge tag 'topic/drm-misc-2015-10-19' of git://anongit.freedesktop.org/drm-intel into drm-next

More drm-misc for 4.4.
- fb refcount fix in atomic fbdev
- various locking reworks to reduce drm_global_mutex and dev->struct_mutex
- rename docbook to gpu.tmpl and include vga_switcheroo stuff, plus more
  vga_switcheroo (Lukas Wunner)
- viewport check fixes for atomic drivers from Ville
- DRM_DEBUG_VBL from Ville
- non-contentious header fixes from Mikko Rapeli
- small things all over

* tag 'topic/drm-misc-2015-10-19' of git://anongit.freedesktop.org/drm-intel: (31 commits)
  drm/fb-helper: Fix fb refcounting in pan_display_atomic
  drm/fb-helper: Set plane rotation directly
  drm: fix mutex leak in drm_dp_get_mst_branch_device
  drm: Check plane src coordinates correctly during page flip for atomic drivers
  drm: Check crtc viewport correctly with rotated primary plane on atomic drivers
  drm: Refactor plane src coordinate checks
  drm: Swap w/h when converting the mode to src coordidates for a rotated primary plane
  drm: Don't leak fb when plane crtc coodinates are bad
  ALSA: hda - Spell vga_switcheroo consistently
  drm/gem: Use kref_get_unless_zero for the weak mmap references
  drm/vgem: Drop vgem_drm_gem_mmap
  drm: Fix return value of drm_framebuffer_init()
  drm/gem: Use container_of in drm_gem_object_free
  drm/gem: Check locking in drm_gem_object_unreference
  drm/gem: Drop struct_mutex requirement from drm_gem_mmap_obj
  drm/i810_drm.h: include drm/drm.h
  r128_drm.h: include drm/drm.h
  savage_drm.h: include <drm/drm.h>
  gpu/doc: Convert to markdown harder
  gpu/doc: Add vga_switcheroo documentation
  ...

6 years agoMerge tag 'drm-intel-next-2015-10-10' of git://anongit.freedesktop.org/drm-intel...
Dave Airlie [Mon, 19 Oct 2015 23:00:01 +0000 (09:00 +1000)]
Merge tag 'drm-intel-next-2015-10-10' of git://anongit.freedesktop.org/drm-intel into drm-next

- dmc fixes from Animesh (not yet all) for deeper sleep states
- piles of prep patches from Ville to make mmio functions type-safe
- more fbc work from Paulo all over
- w/a shuffling from Arun Siluvery
- first part of atomic watermark updates from Matt and Ville (later parts had to
  be dropped again unfortunately)
- lots of patches to prepare bxt dsi support ( Shashank Sharma)
- userptr fixes from Chris
- audio rate interface between i915/snd_hda plus kerneldoc (Libin Yang)
- shrinker improvements and fixes (Chris Wilson)
- lots and lots of small patches all over

* tag 'drm-intel-next-2015-10-10' of git://anongit.freedesktop.org/drm-intel: (134 commits)
  drm/i915: Update DRIVER_DATE to 20151010
  drm/i915: Partial revert of atomic watermark series
  drm/i915: Early exit from semaphore_waits_for for execlist mode.
  drm/i915: Remove wrong warning from i915_gem_context_clean
  drm/i915: Determine the stolen memory base address on gen2
  drm/i915: fix FBC buffer size checks
  drm/i915: fix CFB size calculation
  drm/i915: remove pre-atomic check from SKL update_primary_plane
  drm/i915: don't allocate fbcon from stolen memory if it's too big
  Revert "drm/i915: Call encoder hotplug for init and resume cases"
  Revert "drm/i915: Add hot_plug hook for hdmi encoder"
  drm/i915: use error path
  drm/i915/irq: Fix misspelled word register in kernel-doc
  drm/i915/irq: Fix kernel-doc warnings
  drm/i915: Hook up ring workaround writes at context creation time on Gen6-7.
  drm/i915: Don't warn if the workaround list is empty.
  drm/i915: Resurrect golden context on gen6/7
  drm/i915/chv: remove pre-production hardware workarounds
  drm/i915/snb: remove pre-production hardware workaround
  drm/i915/bxt: Set time interval unit to 0.833us
  ...

6 years agoMerge branch 'drm/next/du' of git://linuxtv.org/pinchartl/fbdev into drm-next
Dave Airlie [Mon, 19 Oct 2015 22:58:45 +0000 (08:58 +1000)]
Merge branch 'drm/next/du' of git://linuxtv.org/pinchartl/fbdev into drm-next

some rcar fixes.

* 'drm/next/du' of git://linuxtv.org/pinchartl/fbdev:
  drm: rcar-du: Fix plane state free in plane reset handler
  drm: rcar-du: Enable DU0 to DPAD connection on R8A7791
  drm: rcar-du: Add dependency on OF
  drm: rcar-du: Remove obsolete rcar-du-r8a779x platform_device_id entries

6 years agodrm: rcar-du: Fix plane state free in plane reset handler
Laurent Pinchart [Mon, 27 Jul 2015 08:42:54 +0000 (11:42 +0300)]
drm: rcar-du: Fix plane state free in plane reset handler

The plane reset handler frees the plane state and allocates a new
default state, but when doing so attempt to free the plane state using
the base plane state pointer instead of casting it to the
driver-specific state object that has been allocated. Fix it by using
the rcar_du_plane_atomic_destroy_state() function to destroy the plane
state instead of duplicating the code.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
6 years agodrm: rcar-du: Enable DU0 to DPAD connection on R8A7791
Laurent Pinchart [Tue, 28 Apr 2015 12:26:33 +0000 (15:26 +0300)]
drm: rcar-du: Enable DU0 to DPAD connection on R8A7791

The DPAD RGB output can be driven by both DU0 and DU1 on R8A7791. Mark
the DU0 connection as possible.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
6 years agodrm: rcar-du: Add dependency on OF
Laurent Pinchart [Thu, 16 Jul 2015 08:42:37 +0000 (11:42 +0300)]
drm: rcar-du: Add dependency on OF

The driver requires OF support, add a dependency in Kconfig and remove
the platform_device_id table that isn't used anymore.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
6 years agodrm: rcar-du: Remove obsolete rcar-du-r8a779x platform_device_id entries
Geert Uytterhoeven [Tue, 23 Jun 2015 12:58:52 +0000 (14:58 +0200)]
drm: rcar-du: Remove obsolete rcar-du-r8a779x platform_device_id entries

Since commit a483dcbfa21f919c ("ARM: shmobile: lager: Remove legacy
board support"), R-Car Gen2 SoCs are only supported in generic DT-only
ARM multi-platform builds.  The driver doesn't need to match platform
devices by name anymore, hence remove the corresponding
platform_device_id entry.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
6 years agodrm/amdgpu/dce: simplify suspend/resume
Alex Deucher [Thu, 15 Oct 2015 20:53:27 +0000 (16:53 -0400)]
drm/amdgpu/dce: simplify suspend/resume

We were basically opencoding the same thing in both
hw_init and resume and hw_fini and suspend.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
6 years agodrm/i915: Use round to closest when computing the CEA 1.001 pixel clocks
Ville Syrjälä [Thu, 8 Oct 2015 08:43:34 +0000 (11:43 +0300)]
drm/i915: Use round to closest when computing the CEA 1.001 pixel clocks

drm_edid.c now computes the alternate CEA clocks using
DIV_ROUND_CLOSEST(), so follow suit in the N/CTS setup to make sure we
pick the right setting for the mode.

Unfortunately we can't actually use DIV_ROUND_CLOSEST() here due to the
({}) construct used, so just stick in raw numbers instead.

Cc: Clint Taylor <clinton.a.taylor@intel.com>
Cc: Libin Yang <libin.yang@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
6 years agodrm/amdgpu/gfx8: set TC_WB_ACTION_EN in RELEASE_MEM packet
Alex Deucher [Thu, 15 Oct 2015 22:20:45 +0000 (18:20 -0400)]
drm/amdgpu/gfx8: set TC_WB_ACTION_EN in RELEASE_MEM packet

This is the recommended setting from the hw team for newer
versions of the firmware.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
6 years agodrm/fb-helper: Fix fb refcounting in pan_display_atomic
Daniel Vetter [Fri, 16 Oct 2015 17:11:30 +0000 (19:11 +0200)]
drm/fb-helper: Fix fb refcounting in pan_display_atomic

In

commit bbb1e52402b2a288b09ae37e8182599931c7e9df
Author: Rob Clark <robdclark@gmail.com>
Date:   Tue Aug 25 15:35:58 2015 -0400

    drm/fb-helper: atomic restore_fbdev_mode()..

we've forgotten to do the plane->old_fb refcount dance for
pan_display_atomic, which can result in refcount leaks if the current
configuration is not from fbcon. Which apparently can happen when
vt-switching - fbcon does a pan first before a set_par.

OCD-align function parameters while at it.

v2: Actually git add the OCD.

Cc: Rob Clark <robdclark@gmail.com>
Cc: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92483
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1445015490-27682-1-git-send-email-daniel.vetter@ffwll.ch
Tested-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
6 years agodrm/fb-helper: Set plane rotation directly
Daniel Vetter [Fri, 16 Oct 2015 16:23:13 +0000 (18:23 +0200)]
drm/fb-helper: Set plane rotation directly

The point behind standardizing properties into core drm state
structures is also that internal code looks prettiers. Take advantage
of that and set rotation directly in the fbdev atomic code.

Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1445012594-25988-1-git-send-email-daniel.vetter@ffwll.ch
Acked-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
6 years agodrm: fix mutex leak in drm_dp_get_mst_branch_device
Adam Richter [Fri, 16 Oct 2015 10:33:02 +0000 (03:33 -0700)]
drm: fix mutex leak in drm_dp_get_mst_branch_device

In Linux 4.3-rc5, there is an error case in drm_dp_get_branch_device
that returns without releasing mgr->lock, resulting a spew of kernel
messages about a kernel work function possibly having leaked a mutex
and presumably more serious adverse consequences later.  This patch
changes the error to "goto out" to unlock the mutex before returning.

Signed-off-by: Adam J. Richter <adam_richter2004@yahoo.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
6 years agodrm: Check plane src coordinates correctly during page flip for atomic drivers
Ville Syrjälä [Thu, 15 Oct 2015 17:40:02 +0000 (20:40 +0300)]
drm: Check plane src coordinates correctly during page flip for atomic drivers

Instead of relying on the old crtc-{x,y,mode} gunk, dig out the primary
plane coordinates from the plane state when checking them against the
new framebuffer during page flip.

Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1444930802-8515-5-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
6 years agodrm: Check crtc viewport correctly with rotated primary plane on atomic drivers
Ville Syrjälä [Fri, 16 Oct 2015 15:38:39 +0000 (18:38 +0300)]
drm: Check crtc viewport correctly with rotated primary plane on atomic drivers

On atomic drivers we can dig out the primary plane rotation from the
plane state instead of looking at the legacy crtc->invert_dimensions
flag. The flag is not set by anyone except omapdrm, and it would be
racy to set it the same way in the atomic helpers.

v2: Kill crtc->invert_dimensions totally since omap is state based
    already and no one else ever used it (Matt)

Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1445009919-22746-1-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
6 years agodrm: Refactor plane src coordinate checks
Ville Syrjälä [Thu, 15 Oct 2015 17:40:00 +0000 (20:40 +0300)]
drm: Refactor plane src coordinate checks

Pull the plane src coordinate checks into a separate function so that we
can share them for the legacy and new stuff.

Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1444930802-8515-3-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
6 years agodrm: Swap w/h when converting the mode to src coordidates for a rotated primary plane
Ville Syrjälä [Thu, 15 Oct 2015 17:39:59 +0000 (20:39 +0300)]
drm: Swap w/h when converting the mode to src coordidates for a rotated primary plane

When converting the mode hdisplay/vdisplay to primary plane src
coordinates we need to take into account the current plane
rotation.

Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1444930802-8515-2-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
6 years agodrm: Don't leak fb when plane crtc coodinates are bad
Ville Syrjälä [Thu, 15 Oct 2015 17:39:58 +0000 (20:39 +0300)]
drm: Don't leak fb when plane crtc coodinates are bad

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
6 years agoALSA: hda - Spell vga_switcheroo consistently
Lukas Wunner [Fri, 4 Sep 2015 18:49:36 +0000 (20:49 +0200)]
ALSA: hda - Spell vga_switcheroo consistently

Currently everyone and their dog has their own favourite spelling
for vga_switcheroo. This makes it hard to grep dmesg for log entries
relating to vga_switcheroo. It also makes it hard to find related
source files in the tree.

vga_switcheroo.c uses pr_fmt "vga_switcheroo". Use that everywhere.

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/9b0175319ce78d831acfcf11e4c6c760f826b0e3.1444663039.git.lukas@wunner.de
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
6 years agodrm/gem: Use kref_get_unless_zero for the weak mmap references
Daniel Vetter [Thu, 15 Oct 2015 09:33:43 +0000 (11:33 +0200)]
drm/gem: Use kref_get_unless_zero for the weak mmap references

Compared to wrapping the final kref_put with dev->struct_mutex this
allows us to only acquire the offset manager look both in the final
cleanup and in the lookup. Which has the upside that no locks leak out
of the core abstractions. But it means that we need to hold a
temporary reference to the object while checking mmap constraints, to
make sure the object doesn't disappear. Extended the critical region
would have worked too, but would result in more leaky locking.

Also, this is the final bit which required dev->struct_mutex in gem
core, now modern drivers can be completely struct_mutex free!

This needs a new drm_vma_offset_exact_lookup_locked and makes both
drm_vma_offset_exact_lookup and drm_vma_offset_lookup unused.

v2: Don't leak object references in failure paths (David).

v3: Add a comment from Chris explaining how the ordering works, with
the slight adjustment that I dropped any mention of struct_mutex since
with this patch it's now immaterial ot core gem.

Cc: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://mid.gmane.org/1444901623-18918-1-git-send-email-daniel.vetter@ffwll.ch
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
6 years agodrm/vgem: Drop vgem_drm_gem_mmap
Daniel Vetter [Thu, 15 Oct 2015 07:36:23 +0000 (09:36 +0200)]
drm/vgem: Drop vgem_drm_gem_mmap

It's duplicating (without using some of the helpers) drm_gem_mmap with
the addition that it can redirect to drm-buf mmap support. But prime
import/export was dropped in

commit 990ed2720717173bbdea4cfb2bad37cc7aa91495
Author: Rob Clark <robdclark@gmail.com>
Date:   Thu May 21 11:58:30 2015 -0400

    drm/vgem: drop DRIVER_PRIME (v2)

for now, so this is dead code. And since I want to rework the locking
for drm_gem_mmap it seems simpler to de-dupe this code for now and
then start over with the reworked one again, if we want to resurrect
this all indeed.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://mid.gmane.org/1444894601-5200-8-git-send-email-daniel.vetter@ffwll.ch
Acked-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
6 years agodrm: Fix return value of drm_framebuffer_init()
Lukas Wunner [Thu, 15 Oct 2015 09:56:56 +0000 (11:56 +0200)]
drm: Fix return value of drm_framebuffer_init()

In its original version, drm_framebuffer_init() returned a negative int
if drm_mode_object_get() failed (f453ba046074, "DRM: add mode setting
support").

This was accidentally disabled by commit 4b096ac10da0 ("drm: revamp
locking around fb creation/destruction"). Thus, drm_framebuffer_init()
pretends success if drm_mode_object_get() failed.

Reinstate the original behaviour. Also fix erroneous kernel-doc of
drm_mode_object_get().

Fixes: 4b096ac10da0 ("drm: revamp locking around fb creation/
    destruction")
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
6 years agodrm/gem: Use container_of in drm_gem_object_free
Daniel Vetter [Thu, 15 Oct 2015 07:36:26 +0000 (09:36 +0200)]
drm/gem: Use container_of in drm_gem_object_free

Just a random thing I spotted while reading code - better safe than
sorry.

Link: http://mid.gmane.org/1444894601-5200-11-git-send-email-daniel.vetter@ffwll.ch
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
6 years agodrm/gem: Check locking in drm_gem_object_unreference
Daniel Vetter [Thu, 15 Oct 2015 07:36:25 +0000 (09:36 +0200)]
drm/gem: Check locking in drm_gem_object_unreference

Pretty soon only some drivers will need dev->struct_mutex in their
gem_free_object callbacks. Hence it's really important to make sure
everything still keeps getting this right.

v2: Don't check for locking before we check for non-NULL obj. Spotted
by Dan Carpenter.

Link: http://mid.gmane.org/1444894601-5200-10-git-send-email-daniel.vetter@ffwll.ch
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
6 years agoMerge branch 'virtio-gpu-for-drm-next' of git://git.kraxel.org/linux into drm-next
Dave Airlie [Sun, 18 Oct 2015 21:16:15 +0000 (07:16 +1000)]
Merge branch 'virtio-gpu-for-drm-next' of git://git.kraxel.org/linux into drm-next

Add 3D support to the virtio-gpu.

* 'virtio-gpu-for-drm-next' of git://git.kraxel.org/linux:
  virtio-gpu: add page flip support
  virtio-gpu: mark as a render gpu
  virtio-gpu: add basic prime support
  virtio-gpu: add 3d/virgl support
  virtio-gpu: don't free things on ttm_bo_init failure
  virtio-gpu: wait for cursor updates finish
  virtio-gpu: add & use virtio_gpu_queue_fenced_ctrl_buffer
  virtio-gpu: add virtio_gpu_queue_ctrl_buffer_locked

6 years agodrm/gem: Drop struct_mutex requirement from drm_gem_mmap_obj
Daniel Vetter [Thu, 15 Oct 2015 07:36:24 +0000 (09:36 +0200)]
drm/gem: Drop struct_mutex requirement from drm_gem_mmap_obj

Since

commit 131e663bd6f1055caaff128f9aa5071d227eeb72
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Thu Jul 9 23:32:33 2015 +0200

    drm/gem: rip out drm vma accounting for gem mmaps

there is no need for this any more.

v2: Fixup compile noise spotted by 0-day build.

Link: http://mid.gmane.org/1444894601-5200-9-git-send-email-daniel.vetter@ffwll.ch
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
6 years agodrm/i810_drm.h: include drm/drm.h
Mikko Rapeli [Thu, 15 Oct 2015 05:55:51 +0000 (07:55 +0200)]
drm/i810_drm.h: include drm/drm.h

Fixes userspace compilation error:

error: array type has incomplete element type
struct drm_clip_rect boxes[I810_NR_SAREA_CLIPRECTS];

Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
6 years agor128_drm.h: include drm/drm.h
Mikko Rapeli [Thu, 15 Oct 2015 05:55:46 +0000 (07:55 +0200)]
r128_drm.h: include drm/drm.h

Fixes compile error:

drm/r128_drm.h:156:23: error: array type has incomplete element type
  struct drm_clip_rect boxes[R128_NR_SAREA_CLIPRECTS];

Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
6 years agosavage_drm.h: include <drm/drm.h>
Mikko Rapeli [Thu, 15 Oct 2015 05:55:49 +0000 (07:55 +0200)]
savage_drm.h: include <drm/drm.h>

Fixes compiler error:

drm/savage_drm.h:50:24: error: array type has incomplete element type
  struct drm_tex_region texList[SAVAGE_NR_TEX_HEAPS][SAVAGE_NR_TEX_REGIONS +

Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
6 years agogpu/doc: Convert to markdown harder
Lukas Wunner [Mon, 12 Oct 2015 07:10:33 +0000 (09:10 +0200)]
gpu/doc: Convert to markdown harder

This snippet...

    * Lock VMA manager for extended lookups. Only *_locked() VMA function calls
    * are allowed while holding this lock. All other contexts are blocked from VMA
    * until the lock is released via drm_vma_offset_unlock_lookup().

...causes markdown-enabled kernel-doc to barf:

    debian/build/build-doc/Documentation/DocBook/gpu.aux.xml:3247: parser error : Opening and ending tag mismatch: emphasis line 3247 and function
       *<function><emphasis>locked</function> VMA function calls are allowed while
                                             ^
    /root/airlied/debian/build/build-doc/Documentation/DocBook/gpu.aux.xml:3249: parser error : Opening and ending tag mismatch: function line 3249 and emphasis
       released via <function>drm</emphasis>vma_offset_unlock_lookup</function>.
                                            ^
    unable to parse /root/airlied/debian/build/build-doc/Documentation/DocBook/gpu.aux.xml

A quick workaround is to replace *_locked() by X_locked().

Cc: Danilo Cesar Lemes de Paula <danilo.cesar@collabora.co.uk>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
[danvet: Just drop the X_ too, the usual style is _unlocked, except
that _ seems to be what annoys markdown.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
6 years agogpu/doc: Add vga_switcheroo documentation
Lukas Wunner [Sun, 11 Oct 2015 09:55:00 +0000 (11:55 +0200)]
gpu/doc: Add vga_switcheroo documentation

Requires Markdown support.

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
6 years agogpu/doc: Fix up remaining occurrences of old document title
Lukas Wunner [Sun, 11 Oct 2015 09:26:26 +0000 (11:26 +0200)]
gpu/doc: Fix up remaining occurrences of old document title

Following Daniel's renaming of the document.

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
6 years agodrm/doc: Rename docbook to gpu.tmpl
Daniel Vetter [Wed, 7 Oct 2015 07:55:28 +0000 (09:55 +0200)]
drm/doc: Rename docbook to gpu.tmpl

DRM is a lot more than a direct rendering manager nowadays, and there's
also a bunch of things worth documenting for gpu driver developers
outside of drivers/gpu/drm, like vgaarb, vga_switcheroo or the various
hardware buses like host1x and ipu-v3.

To avoid further confusion let's rename the top-level to reflect
reality.

And yes I'm already looking forward to when we need to replace the G
in GPU with a * ;-)

Inspired by a thread with Lukas since he refused to include the
vga_switcheroo docs into the drm docs because it's not drm.

Cc: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
[Lukas: Drop BUG() easter egg in i915_gem_execbuffer.c spotted by Jani
and fix typos in commit message.]
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
6 years agodrm: misc cleanup
Rob Clark [Tue, 13 Oct 2015 14:13:28 +0000 (10:13 -0400)]
drm: misc cleanup

Drop unused drm_atomic and fix comment for drm_debug.

Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
6 years agovga_switcheroo: Use enum vga_switcheroo_client_id instead of int
Lukas Wunner [Fri, 28 Aug 2015 10:54:07 +0000 (12:54 +0200)]
vga_switcheroo: Use enum vga_switcheroo_client_id instead of int

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
6 years agovga_switcheroo: Use VGA_SWITCHEROO_UNKNOWN_ID instead of -1
Lukas Wunner [Fri, 28 Aug 2015 11:30:32 +0000 (13:30 +0200)]
vga_switcheroo: Use VGA_SWITCHEROO_UNKNOWN_ID instead of -1

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
6 years agovga_switcheroo: Use enum vga_switcheroo_state instead of int
Lukas Wunner [Fri, 28 Aug 2015 09:56:26 +0000 (11:56 +0200)]
vga_switcheroo: Use enum vga_switcheroo_state instead of int

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>