muen/linux.git
2 years agoMerge tag 'tegra-for-4.21-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel...
Olof Johansson [Tue, 11 Dec 2018 16:05:17 +0000 (08:05 -0800)]
Merge tag 'tegra-for-4.21-dt-bindings' of git://git./linux/kernel/git/tegra/linux into next/dt

dt-bindings: Changes for v4.21-rc1

This contains a few cleanups of and additions to existing device tree
bindings, such as XUSB, EMC, PMC and thermal.

* tag 'tegra-for-4.21-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  dt-bindings: tegra186-pmc: Add interrupt controller properties
  dt-bindings: thermal: tegra-bpmp: Add Tegra194 support
  dt: bindings: Move tegra20-emc binding to memory-controllers directory
  dt: bindings: tegra20-emc: Document clock property
  dt: bindings: tegra20-emc: Document interrupt property
  dt-bindings: usb: xhci-tegra: Add power-domain details

Signed-off-by: Olof Johansson <olof@lixom.net>
2 years agoMerge tag 'renesas-dt-bindings-for-v4.21' of https://git.kernel.org/pub/scm/linux...
Olof Johansson [Tue, 11 Dec 2018 16:05:01 +0000 (08:05 -0800)]
Merge tag 'renesas-dt-bindings-for-v4.21' of https://git./linux/kernel/git/horms/renesas into next/dt

Renesas ARM Based SoC DT Bindings Updates for v4.21

* Move 'renesas,prr' binding to its own document
  - Prepration for converting board-level bindings to json-schema

* Document iW-RainboW-G20D-Qseven-RZG1N board and iWave RZ/G1N SOM

* tag 'renesas-dt-bindings-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  dt-bindings: arm: renesas: Move 'renesas,prr' binding to its own doc
  dt-bindings: arm: renesas: Document iW-RainboW-G20D-Qseven-RZG1N board
  dt-bindings: arm: renesas: Document iWave RZ/G1N SOM

Signed-off-by: Olof Johansson <olof@lixom.net>
2 years agoMerge tag 'renesas-arm-dt2-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel...
Olof Johansson [Tue, 11 Dec 2018 16:03:48 +0000 (08:03 -0800)]
Merge tag 'renesas-arm-dt2-for-v4.21' of https://git./linux/kernel/git/horms/renesas into next/dt

Second Round of Renesas ARM Based SoC DT Updates for v4.21

* RZ/G1N (r8a7744) SoC
  - Describe in DT: SYS-DMAC, GPIO, Ethernet AVB, SMP, [H]SCIF{A|B},
    I2C, USB 2.0 and 3.0 hosts, USB-DMAC, HSUSB, RWDT, Audio, CAN, IRQC,
    thermal, CMT, VIN, VSP, IPMMU, PMU, TPU, QSPI MSIOF, and PCIE
  - iWave G20D-Q7 board
    - Initial support
    - Enable eMMC, SDHI and SPIO NOR support
  - Add camera daughterboard

* RZ/G1M (r8a7743) SoC
  - Remove legacy "renesas,rcar-thermal" compatibility

* tag 'renesas-arm-dt2-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (34 commits)
  ARM: dts: r8a7744-iwg20m: Add SPI NOR support
  ARM: dts: iwg20d-q7-common: Move cmt/rwdt node out of RZ/G1M SOM
  ARM: dts: r8a7744: Add PCIe Controller device node
  ARM: dts: r8a7744: Add xhci support
  ARM: dts: r8a7744: Add MSIOF[012] support
  ARM: dts: r8a7744: Add QSPI support
  ARM: dts: r8a7744-iwg20d-q7-dbcm-ca: Add device tree for camera DB
  ARM: dts: r8a7744: Add TPU support
  ARM: dts: r8a7744: Add PWM SoC support
  ARM: dts: r8a7744: Add IPMMU DT nodes
  ARM: dts: r8a7744: Add VSP support
  ARM: dts: r8a7744: add VIN dt support
  ARM: dts: r8a7744: Add CMT SoC specific support
  ARM: dts: r8a7744: Add thermal device to DT
  ARM: dts: r8a7744: Add IRQC support
  ARM: dts: r8a7744: Add CAN support
  ARM: dts: r8a7744: Add audio support
  ARM: dts: r8a7744: Add RWDT node
  ARM: dts: r8a7744: Add USB-DMAC and HSUSB device nodes
  ARM: dts: r8a7744: USB 2.0 host support
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
2 years agoMerge tag 'renesas-arm64-dt2-for-v4.21' of https://git.kernel.org/pub/scm/linux/kerne...
Olof Johansson [Tue, 11 Dec 2018 16:01:55 +0000 (08:01 -0800)]
Merge tag 'renesas-arm64-dt2-for-v4.21' of https://git./linux/kernel/git/horms/renesas into next/dt

Second Round of Renesas ARM64 Based SoC DT Updates for v4.21

* R-Car D3 (r8a77995) SoC based Draak board
  - Add the backlight device for the LVDS1 output

* R-Car H3 (r8a7795) ES1.0 SoC
  - Add missing power domains to IPMMU nodes

* R-Car M3-N (r8a77965) SoC
  - Remove non-existent IPMMU-IR

* tag 'renesas-arm64-dt2-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  arm64: dts: renesas: r8a77995: draak: Add backlight
  arm64: dts: renesas: r8a7795-es1: Add missing power domains to IPMMU nodes
  arm64: dts: renesas: r8a77965: Remove non-existent IPMMU-IR

Signed-off-by: Olof Johansson <olof@lixom.net>
2 years agoMerge tag 'aspeed-4.21-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git...
Olof Johansson [Tue, 11 Dec 2018 15:59:16 +0000 (07:59 -0800)]
Merge tag 'aspeed-4.21-devicetree' of git://git./linux/kernel/git/joel/aspeed into next/dt

ASPEED device tree updates for 4.20

 - New machine: Facebook Backpack-CMM BMC and flash layout

 - OpenPower reference systems (Palmetto P8, Romulus P9) move to the
   ColdFire based FSI driver

 - Misc device tree updates from the OpenBMC project

* tag 'aspeed-4.21-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
  ARM: dts: aspeed: Add Facebook Backpack-CMM BMC
  ARM: dts: Add Facebook BMC flash layout
  ARM: dts: aspeed: wspoon: Enable iio-hwmon battery
  ARM: dts: aspeed: romulus: Enable iio-hwmon-battery
  ARM: dts: aspeed: Enable VHUB on Romulus
  ARM: dts: aspeed-palmetto: Add LPC control node
  ARM: dts: aspeed: Palmetto system can use coprocessor for FSI
  ARM: dts: aspeed: Romulus system can use coprocessor for FSI

Signed-off-by: Olof Johansson <olof@lixom.net>
2 years agoMerge tag 'pxa-dt-4.21' of https://github.com/rjarzmik/linux into next/dt
Olof Johansson [Tue, 11 Dec 2018 15:43:46 +0000 (07:43 -0800)]
Merge tag 'pxa-dt-4.21' of https://github.com/rjarzmik/linux into next/dt

This device-tree pxa update brings :
 - various fixes from Daniel (W=12 issues mainly)
 - support for the first pxa3xx devicetree pxa board

* tag 'pxa-dt-4.21' of https://github.com/rjarzmik/linux:
  ARM: dts: pxa3xx: Add Raumfeld DTS files
  ARM: dts: pxa: clean up USB controller nodes
  ARM: dts: pxa3xx: clean up pxa3xx clock controller node name
  ARM: dts: pxa3xx: order timer and gcu nodes under /pxabus
  ARM: dts: pxa2xx: fix hwuart memory range
  ARM: dts: pxa3xx: drop #address-cells and #size-cells from pinctrl node
  ARM: dts: pxa2xx: drop #address-cells and #size-cells from /cpus
  ARM: dts: pxa3xx: add gcu node

Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agodt-bindings: arm: renesas: Move 'renesas,prr' binding to its own doc
Rob Herring [Mon, 3 Dec 2018 21:32:14 +0000 (15:32 -0600)]
dt-bindings: arm: renesas: Move 'renesas,prr' binding to its own doc

In preparation to convert board-level bindings to json-schema, move
various misc SoC bindings out to their own file.

Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
3 years agodt-bindings: arm: renesas: Document iW-RainboW-G20D-Qseven-RZG1N board
Biju Das [Wed, 26 Sep 2018 10:44:46 +0000 (11:44 +0100)]
dt-bindings: arm: renesas: Document iW-RainboW-G20D-Qseven-RZG1N board

Document the iW-RainboW-G20D-Qseven-RZG1N device tree bindings,
listing it as a supported board.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
3 years agodt-bindings: arm: renesas: Document iWave RZ/G1N SOM
Biju Das [Wed, 26 Sep 2018 08:21:44 +0000 (09:21 +0100)]
dt-bindings: arm: renesas: Document iWave RZ/G1N SOM

Document the iW-RainboW-G20M-RZ/G1N Qseven device tree bindings,
listing it as a supported system on module.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
3 years agoARM: dts: r8a7744-iwg20m: Add SPI NOR support
Biju Das [Wed, 5 Dec 2018 09:06:52 +0000 (09:06 +0000)]
ARM: dts: r8a7744-iwg20m: Add SPI NOR support

Add support for the SPI NOR device used to boot up the system
to the iWave RZ/G1N Qseven System On Module DT.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
3 years agoarm64: dts: renesas: r8a77995: draak: Add backlight
Laurent Pinchart [Sun, 25 Nov 2018 14:40:30 +0000 (16:40 +0200)]
arm64: dts: renesas: r8a77995: draak: Add backlight

Add the backlight device for the LVDS1 output, in preparation for panel
support.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
3 years agoARM: dts: iwg20d-q7-common: Move cmt/rwdt node out of RZ/G1M SOM
Biju Das [Wed, 5 Dec 2018 09:06:51 +0000 (09:06 +0000)]
ARM: dts: iwg20d-q7-common: Move cmt/rwdt node out of RZ/G1M SOM

The iWave RZ/G1N board is almost identical to RZ/G1M. cmt and rwdt modules
are SoC specific and should be part of board dts rather than SoM dtsi. By
moving these nodes to the common dtsi it allows cmt and rwdt to be enabled
on both of these boards with less lines of code.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
3 years agoARM: dts: r8a7744: Add PCIe Controller device node
Biju Das [Tue, 27 Nov 2018 11:56:35 +0000 (11:56 +0000)]
ARM: dts: r8a7744: Add PCIe Controller device node

Add a device node for the PCIe controller on the Renesas
RZ/G1N (r8a7744) SoC.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
3 years agoARM: dts: r8a7744: Add xhci support
Biju Das [Tue, 27 Nov 2018 11:56:34 +0000 (11:56 +0000)]
ARM: dts: r8a7744: Add xhci support

Add a device node for the xhci controller on the Renesas
RZ/G1N (r8a7744) SoC.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
3 years agoARM: dts: r8a7744: Add MSIOF[012] support
Biju Das [Tue, 27 Nov 2018 11:56:33 +0000 (11:56 +0000)]
ARM: dts: r8a7744: Add MSIOF[012] support

Add the DT nodes needed by MSIOF[012] interfaces to the SoC dtsi.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
3 years agoARM: dts: r8a7744: Add QSPI support
Biju Das [Tue, 27 Nov 2018 11:56:31 +0000 (11:56 +0000)]
ARM: dts: r8a7744: Add QSPI support

Add the DT node for the QSPI interface to the SoC dtsi.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
3 years agoARM: dts: r8a7744-iwg20d-q7-dbcm-ca: Add device tree for camera DB
Biju Das [Tue, 27 Nov 2018 11:56:25 +0000 (11:56 +0000)]
ARM: dts: r8a7744-iwg20d-q7-dbcm-ca: Add device tree for camera DB

This patch adds support for the camera daughter board which is
connected to iWave's RZ/G1N Qseven carrier board.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
3 years agoARM: dts: r8a7744: Add TPU support
Biju Das [Wed, 28 Nov 2018 16:38:31 +0000 (16:38 +0000)]
ARM: dts: r8a7744: Add TPU support

Add TPU support to SoC DT.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
3 years agoARM: dts: r8a7744: Add PWM SoC support
Biju Das [Wed, 28 Nov 2018 16:38:30 +0000 (16:38 +0000)]
ARM: dts: r8a7744: Add PWM SoC support

Add the definitions for pwm[0123456] to the SoC dtsi.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
3 years agoARM: dts: r8a7744: Add IPMMU DT nodes
Biju Das [Wed, 28 Nov 2018 16:38:29 +0000 (16:38 +0000)]
ARM: dts: r8a7744: Add IPMMU DT nodes

Add the six IPMMU instances found in the r8a7744 to DT with a disabled
status.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
3 years agoARM: dts: r8a7744: Add VSP support
Biju Das [Wed, 28 Nov 2018 16:38:28 +0000 (16:38 +0000)]
ARM: dts: r8a7744: Add VSP support

Add VSP support to SoC DT.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
3 years agoARM: dts: r8a7744: add VIN dt support
Biju Das [Wed, 28 Nov 2018 16:38:27 +0000 (16:38 +0000)]
ARM: dts: r8a7744: add VIN dt support

Add VIN[012] support to SoC dt.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
3 years agoARM: dts: r8a7744: Add CMT SoC specific support
Biju Das [Fri, 30 Nov 2018 15:26:35 +0000 (15:26 +0000)]
ARM: dts: r8a7744: Add CMT SoC specific support

Add CMT[01] support to SoC DT.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
3 years agoARM: dts: r8a7744: Add thermal device to DT
Biju Das [Fri, 30 Nov 2018 15:26:34 +0000 (15:26 +0000)]
ARM: dts: r8a7744: Add thermal device to DT

This patch instantiates the thermal sensor module with thermal-zone
support.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
3 years agoARM: dts: r8a7744: Add IRQC support
Biju Das [Fri, 30 Nov 2018 15:26:33 +0000 (15:26 +0000)]
ARM: dts: r8a7744: Add IRQC support

Describe the IRQC interrupt controller in the r8a7744 device tree.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
3 years agoARM: dts: r8a7744: Add CAN support
Biju Das [Fri, 30 Nov 2018 15:26:32 +0000 (15:26 +0000)]
ARM: dts: r8a7744: Add CAN support

Add the definitions for can0 and can1 to the r8a7744 SoC dtsi.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
3 years agoARM: dts: r8a7744: Add audio support
Biju Das [Fri, 30 Nov 2018 15:26:31 +0000 (15:26 +0000)]
ARM: dts: r8a7744: Add audio support

Add sound support for the RZ/G1N SoC (a.k.a. R8A7744).

This work is based on similar work done on the R8A7743 SoC.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
3 years agoARM: dts: r8a7744: Add RWDT node
Biju Das [Fri, 30 Nov 2018 15:26:30 +0000 (15:26 +0000)]
ARM: dts: r8a7744: Add RWDT node

Add a device node for the Watchdog Timer (RWDT) controller on the Renesas
RZ/G1N (r8a7744) SoC.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
3 years agoARM: dts: r8a7744: Add USB-DMAC and HSUSB device nodes
Biju Das [Fri, 30 Nov 2018 15:26:29 +0000 (15:26 +0000)]
ARM: dts: r8a7744: Add USB-DMAC and HSUSB device nodes

Add usb dmac and hsusb device nodes on RZ/G1N SoC dtsi.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
3 years agoARM: dts: r8a7744: USB 2.0 host support
Biju Das [Fri, 30 Nov 2018 15:26:28 +0000 (15:26 +0000)]
ARM: dts: r8a7744: USB 2.0 host support

Describe internal PCI bridge devices, USB phy device and
link PCI USB devices to USB phy.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
3 years agoARM: dts: r8a7744-iwg20m: Enable SDHI0 controller
Biju Das [Fri, 30 Nov 2018 15:26:27 +0000 (15:26 +0000)]
ARM: dts: r8a7744-iwg20m: Enable SDHI0 controller

Enable the SDHI0 controller on iWave RZ/G1N Qseven System On Module.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
3 years agoARM: dts: r8a7744-iwg20m: Add eMMC support
Biju Das [Fri, 30 Nov 2018 15:26:26 +0000 (15:26 +0000)]
ARM: dts: r8a7744-iwg20m: Add eMMC support

Add eMMC support for iWave RZ/G1N Qseven System On Module.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
3 years agoARM: dts: r8a7744: Add MMC node
Biju Das [Fri, 30 Nov 2018 15:26:25 +0000 (15:26 +0000)]
ARM: dts: r8a7744: Add MMC node

Add MMC node to the DT of the r8a7744 SoC.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
3 years agoARM: dts: r8a7744: Add SDHI nodes
Biju Das [Fri, 30 Nov 2018 15:26:24 +0000 (15:26 +0000)]
ARM: dts: r8a7744: Add SDHI nodes

Add SDHI nodes to the DT of the r8a7744 SoC.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
3 years agoARM: dts: r8a7744: Add I2C and IIC support
Biju Das [Fri, 30 Nov 2018 15:26:23 +0000 (15:26 +0000)]
ARM: dts: r8a7744: Add I2C and IIC support

Add the I2C[0-5] and IIC[0,1,3] devices nodes to the R8A7744 device tree.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
3 years agoARM: dts: r8a7744: Add [H]SCIF{A|B} support
Biju Das [Fri, 30 Nov 2018 15:26:22 +0000 (15:26 +0000)]
ARM: dts: r8a7744: Add [H]SCIF{A|B} support

Describe [H]SCIF{|A|B} ports in the R8A7744 device tree.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
3 years agoARM: dts: r8a7744: Add SMP support
Biju Das [Fri, 30 Nov 2018 15:26:21 +0000 (15:26 +0000)]
ARM: dts: r8a7744: Add SMP support

Add DT node for the Advanced Power Management Unit (APMU), add the
second CPU core, and use "renesas,apmu" as "enable-method".

Also add cpu1 phandle node to the PMU interrupt-affinity property.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
3 years agoARM: dts: r8a7744: Add Ethernet AVB support
Biju Das [Fri, 30 Nov 2018 15:26:20 +0000 (15:26 +0000)]
ARM: dts: r8a7744: Add Ethernet AVB support

Add Ethernet AVB support for R8A7744 SoC.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
3 years agoARM: dts: r8a7744: Add GPIO support
Biju Das [Fri, 30 Nov 2018 15:26:19 +0000 (15:26 +0000)]
ARM: dts: r8a7744: Add GPIO support

Describe GPIO blocks in the R8A7744 device tree.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
3 years agoARM: dts: r8a7744: Add SYS-DMAC support
Biju Das [Fri, 30 Nov 2018 15:26:18 +0000 (15:26 +0000)]
ARM: dts: r8a7744: Add SYS-DMAC support

Describe SYS-DMAC0/1 in the R8A7744 device tree.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
3 years agoARM: dts: r8a7744-iwg20d-q7: Add support for iWave G20D-Q7 board based on RZ/G1N
Biju Das [Fri, 30 Nov 2018 15:26:17 +0000 (15:26 +0000)]
ARM: dts: r8a7744-iwg20d-q7: Add support for iWave G20D-Q7 board based on RZ/G1N

Add support for iWave RainboW-G20D-Qseven board based on RZ/G1N.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
3 years agoARM: dts: r8a7744: Initial SoC device tree
Biju Das [Fri, 30 Nov 2018 15:26:16 +0000 (15:26 +0000)]
ARM: dts: r8a7744: Initial SoC device tree

Basic support for the RZ/G1N (R8A7744) SoC. Added placeholders
to avoid compilation error with the common platform code.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
3 years agoARM: dts: r8a7744-iwg20m: Add iWave RZ/G1N Qseven SOM
Biju Das [Fri, 30 Nov 2018 15:26:15 +0000 (15:26 +0000)]
ARM: dts: r8a7744-iwg20m: Add iWave RZ/G1N Qseven SOM

Add support for iWave RZ/G1N Qseven System On Module.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
3 years agoARM: dts: r8a7743: Remove legacy "renesas,rcar-thermal" compatibility
Geert Uytterhoeven [Mon, 3 Dec 2018 15:04:47 +0000 (16:04 +0100)]
ARM: dts: r8a7743: Remove legacy "renesas,rcar-thermal" compatibility

The thermal hardware description for the RZ/G1M SoC was added to its DTS
after the introduction of support for thermal zones, and included a
thermal-zones node from the beginning.

Hence there is no need to claim compatibility with
"renesas,rcar-thermal", which would be needed only for backwards
compatibility with kernels predating thermal zone support.

Fixes: 6c76b4f7d89e89f0 ("ARM: dts: r8a7743: Add thermal device to DT")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
3 years agoARM: dts: pxa3xx: Add Raumfeld DTS files
Daniel Mack [Fri, 30 Nov 2018 17:55:43 +0000 (18:55 +0100)]
ARM: dts: pxa3xx: Add Raumfeld DTS files

This patch adds a set of DTS files that support all PXA3xx based Raumfeld
audio hardware devices.

Common nodes are factored out into 'common' and 'tuneable-clock' include
files to keep the top-level DTS files smaller.

Signed-off-by: Daniel Mack <daniel@zonque.org>
[Robert: Reordered Makefile in alphabetical order]
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
3 years agoMerge tag 'qcom-dts-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/agross...
Olof Johansson [Mon, 3 Dec 2018 21:04:49 +0000 (13:04 -0800)]
Merge tag 'qcom-dts-for-4.21' of git://git./linux/kernel/git/agross/linux into next/dt

Qualcomm Device Tree Changes for v4.21

* Add entry for Qualcomm TSENS thermal drivers
* Update msm8974 thermal entries
* Fix msm8974 Hammerhead magnetometer gpios
* Add SoC specific compatibles for SDHC nodes
* Remove Arrow SD600 eval board

* tag 'qcom-dts-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
  ARM: dts: qcom: Remove Arrow SD600 eval board
  ARM: dts: qcom: Add SoC-specific string for sdhci-msm-v4 nodes
  ARM: dts: qcom: msm8974-hammerhead: correct gpios property on magnetometer
  ARM: dts: msm8974: thermal: Add "qcom,sensors" property
  ARM: dts: msm8974: thermal: split address space into two
  MAINTAINERS: Add entry for Qualcomm TSENS thermal drivers

Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoMerge tag 'qcom-arm64-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git...
Olof Johansson [Mon, 3 Dec 2018 21:04:14 +0000 (13:04 -0800)]
Merge tag 'qcom-arm64-for-4.21' of git://git./linux/kernel/git/agross/linux into next/dt

Qualcomm ARM64 Updates for v4.21

* Add QCS404 base platform and nodes
* Add QCS404 EVB boards
* Add external SD and dependencies for MSM8998-mtp
* Add default scm compatible for MSM8998
* Fix XO clk name on MSM8998
* Add prng-ee nodes for SDM845 and MSM8996
* Add ADC die temp node for pm8998
* Fix documentation on QCOM ADC sample

* tag 'qcom-arm64-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: (34 commits)
  arm64: dts: qcom: msm8998: Fix compatible of scm node
  arm64: dts: qcom: msm8998: Add SDC2 control pins
  arm64: dts: qcom: msm8998-mtp: Add external SD
  arm64: dts: qcom: msm8998: Add SDCC2
  arm64: dts: qcom: msm8998: correct xo clock name
  arm64: dts: qcom: pms405: Add pon and pwrkey nodes
  arm64: dts: qcom: qcs404: Use BAM DMA for serial uart2
  arm64: dts: qcom: qcs404: Add BAM DMA node
  arm64: dts: qcom: qcs404: add prng-ee node
  arm64: dts: qcom: qcs404: Add remoteproc nodes
  arm64: dts: qcom: qcs404: Add scm firmware node
  arm64: dts: qcom: pms405: add gpios
  arm64: dts: qcom: pms405: add rtc node
  arm64: dts: qcom: qcs404: add spmi node
  arm64: dts: qcom: pms405: add spmi node
  arm64: dts: qcom: qcs404: Add sdcc1 node
  arm64: dts: qcom: qcs404: Add TLMM pinctrl node
  arm64: dts: qcom: qcs404: add smp2p nodes
  arm64: dts: qcom: qcs404: Add PMS405 RPM regulators
  arm64: dts: qcom: qcs404: Add RPM GLINK related nodes
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoARM: mmp2: DT: be compatible with mrvl,mmp2
Lubomir Rintel [Sun, 2 Dec 2018 11:38:48 +0000 (12:38 +0100)]
ARM: mmp2: DT: be compatible with mrvl,mmp2

There are more boards that can work with mmp2-dt than just Brownstone.
The OLPC XO-1.75 device tree root is compatible with "mrvl,mmp2" only.

The "mrvl,mmp2-brownstone" string is safe to remove: the Brownstone
device tree contains the "mrvl,mmp2" compatible string too.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoMerge tag 'arm-soc/for-4.21/devicetree' of https://github.com/Broadcom/stblinux into...
Olof Johansson [Mon, 3 Dec 2018 20:50:41 +0000 (12:50 -0800)]
Merge tag 'arm-soc/for-4.21/devicetree' of https://github.com/Broadcom/stblinux into next/dt

This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 4.21, please pull the following:

- Rafal relicenses a bunch of DTS files he wrote under the GPL 2.0+/MIT
  license and adds proper SPDX license tags in the process

- Rene adds support for the Linksys EA6500 v2 Wi-Fi router based on
  BCM4708 plus two BCM4360 and BCM4331 radios

- Phil documents and updates the vchiq mailbox compatible string in
  order to establish a correct agreement between the Raspberry Pi
  firmware and the ARM CPU's view of what an ARM CPU cache line size is,
  he also fixes the mailbox "reg" property to be correctly expressed in
  bytes

- Stefan updates the Raspberry Pi Zero DTS files to use SPDX tags

- Florian enables the SATA PHY and AHCI controller on the BCM63138 SoCs,
  he also does a bit of refactoring of aliases for the Northstar Plus
  DTS files

* tag 'arm-soc/for-4.21/devicetree' of https://github.com/Broadcom/stblinux:
  ARM: dts: BCM5301X: Describe Northstar pins mux controller
  ARM: dts: BCM5301X: Add basic DT for Linksys EA6500 V2
  ARM: dts: bcm2835-rpi-zero: Switch to SPDX identifier
  ARM: dts: bcm283x: Correct mailbox register sizes
  ARM: dts: bcm283x: Correct vchiq compatible string
  dt-bindings: soc: Document "brcm,bcm2836-vchiq"
  ARM: dts: NSP: Move aliases to bcm-nsp.dtsi
  ARM: dts: BCM53573: Relicense SoC file to the GPL 2.0+ / MIT
  ARM: dts: BCM63xx: Enable SATA AHCI and PHY for BCM963138DVT
  ARM: dts: BCM63xx: enable SATA PHY and AHCI controller
  ARM: dts: BCM53573: Relicense Tenda AC9 file to the GPL 2.0+ / MIT
  ARM: dts: BCM5301X: Relicense BCM47094 file to the GPL 2.0+ / MIT
  ARM: dts: BCM5301X: Relicense BCM47081/BCM4709 files to the GPL 2.0+ / MIT

Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoARM: dts: aspeed: Add Facebook Backpack-CMM BMC
Tao Ren [Fri, 9 Nov 2018 00:50:46 +0000 (16:50 -0800)]
ARM: dts: aspeed: Add Facebook Backpack-CMM BMC

Add initial version of device tree file for Facebook Backpack CMM
(Chasis Management Module) ast2500 BMC.

Signed-off-by: Tao Ren <taoren@fb.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
3 years agoARM: dts: Add Facebook BMC flash layout
Tao Ren [Fri, 9 Nov 2018 00:50:34 +0000 (16:50 -0800)]
ARM: dts: Add Facebook BMC flash layout

This is the layout used by Facebook BMC systems. It describes the fixed
flash layout of a 32MB mtd device.

Signed-off-by: Tao Ren <taoren@fb.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
3 years agoARM: dts: aspeed: wspoon: Enable iio-hwmon battery
Matt Spinler [Fri, 12 Oct 2018 15:29:15 +0000 (10:29 -0500)]
ARM: dts: aspeed: wspoon: Enable iio-hwmon battery

The BMC can read the RTC battery voltage via ADC
channel 12.

Signed-off-by: Matt Spinler <spinler@linux.vnet.ibm.com>
Reviewed-by: Lei YU <mine260309@gmail.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
3 years agoARM: dts: aspeed: romulus: Enable iio-hwmon-battery
Lei YU [Wed, 22 Aug 2018 07:47:28 +0000 (15:47 +0800)]
ARM: dts: aspeed: romulus: Enable iio-hwmon-battery

Add iio-hwmon-battery using adc channel 12 and enable adc to make
adc running. This channel is used to read RTC battery voltage.

Note with Romulus hardware design, it requires GPIOR3 to be pulled
high to read the voltage, otherwise the reading is 0.
When GPIOR3 is high, it consumes battery and impacts the battery life.
So it is left for user space to toggle the GPIO when trying to read the
voltage.

Signed-off-by: Lei YU <mine260309@gmail.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
3 years agoARM: dts: aspeed: Enable VHUB on Romulus
Joel Stanley [Wed, 4 Jul 2018 06:25:41 +0000 (16:25 +1000)]
ARM: dts: aspeed: Enable VHUB on Romulus

The Romulus USB bus is connected to the Power9's PCIe USB controller.

Signed-off-by: Joel Stanley <joel@jms.id.au>
3 years agoARM: dts: aspeed-palmetto: Add LPC control node
Joel Stanley [Mon, 27 Aug 2018 23:15:19 +0000 (16:15 -0700)]
ARM: dts: aspeed-palmetto: Add LPC control node

This adds the required LPC node with phandles to the reserved memory
region and the mtd device.

Signed-off-by: Joel Stanley <joel@jms.id.au>
3 years agoARM: dts: aspeed: Palmetto system can use coprocessor for FSI
Benjamin Herrenschmidt [Tue, 24 Jul 2018 04:24:04 +0000 (14:24 +1000)]
ARM: dts: aspeed: Palmetto system can use coprocessor for FSI

This allows userspace to switch away from bitbanging to use kernel
FSI with the coprocessor.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
3 years agoARM: dts: aspeed: Romulus system can use coprocessor for FSI
Benjamin Herrenschmidt [Tue, 24 Jul 2018 04:24:03 +0000 (14:24 +1000)]
ARM: dts: aspeed: Romulus system can use coprocessor for FSI

This replaces the FSI compatible with the ColdFire FSI compatible.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
3 years agoARM: dts: pxa: clean up USB controller nodes
Daniel Mack [Sat, 1 Dec 2018 13:54:51 +0000 (14:54 +0100)]
ARM: dts: pxa: clean up USB controller nodes

PXA25xx SoCs don't have a USB controller, so drop the node from the
common pxa2xx.dtsi base file. Both pxa27x and pxa3xx have a dedicated
node already anyway.

While at it, unify the names for the nodes across all pxa platforms.

Signed-off-by: Daniel Mack <daniel@zonque.org>
Reported-by: Sergey Yanovich <ynvich@gmail.com>
Link: https://patchwork.kernel.org/patch/8375421/
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
3 years agoARM: dts: pxa3xx: clean up pxa3xx clock controller node name
Daniel Mack [Fri, 30 Nov 2018 17:55:42 +0000 (18:55 +0100)]
ARM: dts: pxa3xx: clean up pxa3xx clock controller node name

The clock controller node does not need a unit slave designator as it does
not have a reg property. Also, remove the underscore from the name.

Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
3 years agoARM: dts: pxa3xx: order timer and gcu nodes under /pxabus
Daniel Mack [Fri, 30 Nov 2018 17:55:41 +0000 (18:55 +0100)]
ARM: dts: pxa3xx: order timer and gcu nodes under /pxabus

These are devices on the PXA bus, so make the device tree structure
reflect that.

Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
3 years agoARM: dts: pxa2xx: fix hwuart memory range
Daniel Mack [Fri, 30 Nov 2018 17:55:39 +0000 (18:55 +0100)]
ARM: dts: pxa2xx: fix hwuart memory range

The memory range for the hwuart is at 0x41600000, not 0x41100000.
This also solves a conflict with the MMC controller node.

Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
3 years agoARM: dts: pxa3xx: drop #address-cells and #size-cells from pinctrl node
Daniel Mack [Fri, 30 Nov 2018 17:55:38 +0000 (18:55 +0100)]
ARM: dts: pxa3xx: drop #address-cells and #size-cells from pinctrl node

The pinctrl node does not have any children, so the #address-cells and #size-cells
properties are not needed.

Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
3 years agoARM: dts: pxa2xx: drop #address-cells and #size-cells from /cpus
Daniel Mack [Fri, 30 Nov 2018 17:55:37 +0000 (18:55 +0100)]
ARM: dts: pxa2xx: drop #address-cells and #size-cells from /cpus

PXA is single-core only, so this node will not have enumerable children.
Drop the #address-cells and #size-cells properties to squelch a dtc warning.

Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
3 years agoARM: dts: pxa3xx: add gcu node
Daniel Mack [Mon, 5 Nov 2018 19:18:27 +0000 (20:18 +0100)]
ARM: dts: pxa3xx: add gcu node

Add a device node for hardware graphic acceleration.

Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
3 years agoMerge tag 'hisi-arm64-dt-for-4.21' of git://github.com/hisilicon/linux-hisi into...
Olof Johansson [Fri, 30 Nov 2018 23:46:17 +0000 (15:46 -0800)]
Merge tag 'hisi-arm64-dt-for-4.21' of git://github.com/hisilicon/linux-hisi into next/dt

ARM64: DT: Hisilicon SoCs DT updates for 4.21

* Hi3660 SoC and related boards:
  - Standardize LED labels and triggers for the hikey960 board
  - Add the missing cooling-cells property for the cpu nodes
  - Add all cpus into the cooling maps

* Hi3670 SoC and related boards:
  - Add clock nodes and update the uart clock
  - Add Pinctrl, GPIO and uart nodes
  - Enable uart and add GPIO line names for the hikey970 board

* Hi3798 SoC and related boards:
  - Standardize LED labels and triggers for the poplar board

* Hi6220 SoC and related boards:
  - Standardize LED labels and triggers for the hikey board
  - Add all cpus into the cooling maps

* tag 'hisi-arm64-dt-for-4.21' of git://github.com/hisilicon/linux-hisi:
  ARM64: dts: hisilicon: Add all CPUs in cooling maps
  arm64: dts: hi3660: Add missing cooling device properties for CPUs
  arm64: dts: hisilicon: poplar: Standardize LED labels and triggers
  arm64: dts: hisilicon: hikey960: Standardize LED labels and triggers
  arm64: dts: hisilicon: hikey: Standardize LED labels and triggers
  arm64: dts: hisilicon: hikey970: Add GPIO line names
  arm64: dts: hisilicon: hikey970: Enable on-board UARTs
  arm64: dts: hisilicon: hi3670: Add UART nodes
  arm64: dts: hisilicon: hi3670: Add GPIO controller support
  arm64: dts: hisilicon: Add Pinctrl support for HiKey970 board
  arm64: dts: hisilicon: Source SoC clock for UART6
  arm64: dts: hisilicon: Add clock nodes for Hi3670 SoC

Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoARM: dts: aspeed: add missing memory unit-address
Rob Herring [Fri, 30 Nov 2018 01:52:51 +0000 (19:52 -0600)]
ARM: dts: aspeed: add missing memory unit-address

The base aspeed-g5.dtsi already defines a '/memory@80000000' node, so
'/memory' in the board files create a duplicate node. We're probably
getting lucky that the bootloader fixes up the memory node that the
kernel ends up using. Add the unit-address so it's merged with the base
node.

Found with DT json-schema checks.

Cc: Joel Stanley <joel@jms.id.au>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-aspeed@lists.ozlabs.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoARM: dts: realview-pbx: Fix duplicate regulator nodes
Rob Herring [Fri, 30 Nov 2018 01:05:47 +0000 (19:05 -0600)]
ARM: dts: realview-pbx: Fix duplicate regulator nodes

There's a bug in dtc in checking for duplicate node names when there's
another section (e.g. "/ { };"). In this case, skeleton.dtsi provides
another section. Upon removal of skeleton.dtsi, the dtb fails to build
due to a duplicate node 'fixedregulator@0'. As both nodes were pretty
much the same 3.3V fixed regulator, it hasn't really mattered. Fix this
by renaming the nodes to something unique. In the process, drop the
unit-address which shouldn't be present wtihout reg property.

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoMerge tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman...
Olof Johansson [Fri, 30 Nov 2018 23:18:30 +0000 (15:18 -0800)]
Merge tag 'amlogic-dt64' of https://git./linux/kernel/git/khilman/linux-amlogic into next/dt

arm64: Amlogic DT updates for v4.21
Some highlights:
- new boards: Phicomm N1 (S905D), Libretech S805-AC
- fixes for pinmux pad bias, GPIO line names
- AXG: enable SCPI, add secure monitor

* tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: (26 commits)
  arm64: dts: meson-gx: Add Internal Clock Measurer node
  arm64: dts: amlogic: Add all CPUs in cooling maps
  arm64: dts: meson: add libretech aml-s805x-ac board
  dt-bindings: arm: amlogic: add libretech aml-s805x-ac bindings
  dt-bindings: arm: amlogic: Add Phicomm N1
  dt-bindings: Add vendor prefix for PHICOMM Co., Ltd.
  arm64: dts: meson-gxl: add support for phicomm n1
  arm64: dts: meson: consistently disable pin bias
  arm64: dts: meson: disable pad bias for mmc pinmuxes
  arm64: dts: meson: remove extra subnode in mmc clk_gate pinmux
  arm64: dts: meson: s400: add bcm bluetooth device
  arm64: dts: meson: p230: disable advertisement EEE for GbE.
  arm64: dts: meson-axg: enable SCPI
  Documentation: bindings: Add missing Amlogic SCPI sensor bindings
  arm64: dts: meson-axg: correct sram shared mem unit-address
  arm64: dts: meson-axg: fix mailbox address
  arm64: dts: meson-gx: Add hdmi_5v regulator as hdmi tx supply
  arm64: dts: meson-axg: add secure monitor
  arm64: dts: meson-axg: s400: add cts-rts to the bluetooth uart
  arm64: dts: meson-gxl-khadas-vim: fix GPIO lines names
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoMerge tag 'amlogic-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman...
Olof Johansson [Fri, 30 Nov 2018 23:18:03 +0000 (15:18 -0800)]
Merge tag 'amlogic-dt' of https://git./linux/kernel/git/khilman/linux-amlogic into next/dt

Amlogic 32-bit DT updates for v4.21
- support more timers on meson8
- add the stdout-path property on several boards

* tag 'amlogic-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  ARM: dts: meson: add the clock inputs for the Meson timer
  ARM: dts: meson: add the TIMER B/C/D interrupts
  ARM: dts: meson: consistently disable pin bias
  ARM: dts: meson8b: mxq: add the /chosen/stdout-path property
  ARM: dts: meson8: minix-neo-x8: add the /chosen/stdout-path property
  ARM: dts: meson6: atv1200: add the /chosen/stdout-path property
  dt-bindings: timer: meson6_timer: document the clock inputs
  dt-bindings: timer: meson6_timer: document all interrupts

Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoMerge tag 'omap-for-v4.21/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel...
Olof Johansson [Fri, 30 Nov 2018 23:17:33 +0000 (15:17 -0800)]
Merge tag 'omap-for-v4.21/dt-signed' of git://git./linux/kernel/git/tmlind/linux-omap into next/dt

Device tree changes for omaps for v4.21 merge window

These changes mostly configure pinctrl for am437x-gp-evm. There is
also non-critical fix for a comment for Clang, and we enable earlycon
for am3517-evm.

* tag 'omap-for-v4.21/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: am437x-gp-evm: Add sleep state for beeper pins
  ARM: dts: am437x-gp-evm: Add pinmux for gpio0 wake
  ARM: dts: am437x-gp-evm: Add uart0 pinctrl default and sleep states
  ARM: dts: am437x-gp-evm: Add pinctrl for debugss pins
  ARM: dts: am437x-gp-evm: Add pinctrl for unused_pins
  ARM: dts: am437x-gp-evm: Add state for ddr3 vtt toggle pin
  ARM: dts: am3517-evm: Enable earlycon stdout path
  ARM: dts: omap3-gta04: Fix comment block

Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoMerge tag 'vexpress-drm-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git...
Olof Johansson [Fri, 30 Nov 2018 23:16:42 +0000 (15:16 -0800)]
Merge tag 'vexpress-drm-arm-soc' of git://git./linux/kernel/git/linusw/linux-integrator into next/dt

Versatile Express DTS update for DRM:
This updates the Versatile Express family DTS files to
contain the correct and detailed information required
for the PL11x DRM driver to work properly.

* tag 'vexpress-drm-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
  ARM: dts: Modernize the Vexpress PL111 integration

Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoARM: dts: mmp2: Add SSP controllers
Lubomir Rintel [Wed, 28 Nov 2018 17:53:14 +0000 (18:53 +0100)]
ARM: dts: mmp2: Add SSP controllers

Despite Marvel keeps their base addresses secret there's a good chance
they're actually correct.

SSP1 and SSP3 bases were taken from OLPC 1.75: OpenFirmware and kernel
respectively. SSP2 and SSP4 addresses are from James Cameron who actually
has a copy of the data sheet.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoARM: dts: mmp2: add USB OTG host controller
Lubomir Rintel [Wed, 28 Nov 2018 17:53:13 +0000 (18:53 +0100)]
ARM: dts: mmp2: add USB OTG host controller

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoARM: dts: mmp2: add OTG PHY
Lubomir Rintel [Wed, 28 Nov 2018 17:53:12 +0000 (18:53 +0100)]
ARM: dts: mmp2: add OTG PHY

The USB OTG PHY chip. To be used by the OTG controller.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoARM: dts: mmp2: add more TWSI controllers
Lubomir Rintel [Wed, 28 Nov 2018 17:53:11 +0000 (18:53 +0100)]
ARM: dts: mmp2: add more TWSI controllers

I've gotten the base addresses, clocks and interrupts from an rusty and old
out-of-tree driver. I haven't actually checked against the datasheet, since
that one is reserved for the Marvell inner circle.

Tested with an accelerometer on TWSI6 on an OLPC XO 1.75 machine.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoARM: dts: mmp2: fix TWSI2
Lubomir Rintel [Wed, 28 Nov 2018 17:53:10 +0000 (18:53 +0100)]
ARM: dts: mmp2: fix TWSI2

Marvell keeps their MMP2 datasheet secret, but there are good clues
that TWSI2 is not on 0xd4025000 on that platform, not does it use
IRQ 58. In fact, the IRQ 58 on MMP2 seems to be a signal processor:

   arch/arm/mach-mmp/irqs.h:#define IRQ_MMP2_MSP  58

I'm taking a somewhat educated guess that is probably a copy & paste
error from PXA168 or PXA910 and that the real controller in fact hides
at address 0xd4031000 and uses an interrupt line multiplexed via IRQ 17.

I'm also copying some properties from TWSI1 that were missing or
incorrect.

Tested on a OLPC XO 1.75 machine, where the RTC is on TWSI2.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Tested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoARM: dts: mmp2: add MMC controllers
Lubomir Rintel [Wed, 28 Nov 2018 17:53:09 +0000 (18:53 +0100)]
ARM: dts: mmp2: add MMC controllers

There's apparently four of them on a MMP2.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoARM: dts: mmp2: add clock to the timer
Lubomir Rintel [Wed, 28 Nov 2018 17:53:08 +0000 (18:53 +0100)]
ARM: dts: mmp2: add clock to the timer

The timer needs the timer clock to be enabled, otherwise it stops
ticking.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoARM: dts: mmp2: give gpio node a name
Lubomir Rintel [Wed, 28 Nov 2018 17:53:07 +0000 (18:53 +0100)]
ARM: dts: mmp2: give gpio node a name

This will be useful for boards that actually use GPIO pins.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoARM: dts: mmp2: fix the gpio interrupt cell number
Lubomir Rintel [Wed, 28 Nov 2018 17:53:06 +0000 (18:53 +0100)]
ARM: dts: mmp2: fix the gpio interrupt cell number

gpio-pxa uses two cell to encode the interrupt source: the pin number
and the trigger type. Adjust the device node accordingly.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agodt-bindings: mrvl,mmp-timer: add clock
Lubomir Rintel [Wed, 28 Nov 2018 17:53:05 +0000 (18:53 +0100)]
dt-bindings: mrvl,mmp-timer: add clock

The timer needs the timer clock to be enabled, otherwise it stops
ticking.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoMerge tag 'socfpga_dts_updates_for_v5.0' of git://git.kernel.org/pub/scm/linux/kernel...
Olof Johansson [Fri, 30 Nov 2018 23:09:13 +0000 (15:09 -0800)]
Merge tag 'socfpga_dts_updates_for_v5.0' of git://git./linux/kernel/git/dinguyen/linux into next/dt

SoCFPGA DTS updates for v5.0
- Use SPDX license identifier for all SoCFPGA DTS files.
- Remove dma-mask property as it has been deprecated.
- Use tabs in DTS files.
- Use the specific "altr,stratix10-rst-mgr" property for the Stratix10
  reset manager.

* tag 'socfpga_dts_updates_for_v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
  arm64: dts: stratix10: use "altr,stratix10-rst-mgr" binding
  ARM: dts: socfpga: use tabs for indentation
  arm: dts: socfpga: remove dma-mask property
  arm: dts: socfpga*.dts*: use SPDX-License-Identifier

Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoMerge tag 'renesas-arm64-dt-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel...
Olof Johansson [Fri, 30 Nov 2018 23:05:34 +0000 (15:05 -0800)]
Merge tag 'renesas-arm64-dt-for-v4.21' of https://git./linux/kernel/git/horms/renesas into next/dt

Renesas ARM64 Based SoC DT Updates for v4.21

* H3 (r8a7795) SoC:
  - Remove unneeded sound #address/size-cells

* M3-W (r8a7796) SoC:
  - Describe CMT (Compare Match Timer) devices in DT
  - Describe I2C-DVFS device node in DT

* M3-N (r8a77965) SoC:
  - Describe CAN, CANFD and LVDS in DT

* R-Car H3 (r8a7795) and M3-W (r8a7796) SoCs:
  - Describe CPU topology, capacity and cooling maps in DT
  - Add SSIU support to R-Car audio

* R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) SoCs:
  - Extend register range of HSUSB device to match documentation

* R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) based
  Salvator-X, Salvator-XS and ULCB boards:
  - Switch eMMC bus to 1V8

* R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) based
  Salvator-X and Salvator-XS boards:
  - Describe USB3.0 xHCI host and prerepheral devices as companions

* R-Car E3 (r8a77990) SoC:
  - Add thermal support
  - Add support for interupt controller for external devices (INTC-EX)
  - Describe all SCIF devices and SYS-DMA for I2C and MSIOF devices

* R-Car E3 (r8a77990) based Ebisu board:
  - Enable SDHI, CAN, CANFD, audio and USB3.0
  - Describe serial console pins

* R-Car E3 (r8a77990) based Ebisu and
  R-Car D3 (r8a77995) based Draak board:
  - Enable USB2.0 peripheral device

* R-Car M3-N (r8a77965), E3 (r8a77990) and V3H (r8a77980) SoCs:
  - Connect EtherAVB to IPMMU

* R-Car V3M (r8a77970) and V3H (r8a77980) SoCs:
  - Describe TMU (timer unit), PWM timer controller and MSIOF devides in DT
  - Add thermal support

* RZ/G2M (r8a774a1) SoC:
  - Use clock and power index macros
  - Describe VIN, CSI-2 and CAN devices in DT

* tag 'renesas-arm64-dt-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (40 commits)
  arm64: dts: renesas: Add all CPUs in cooling maps
  arm64: dts: renesas: r8a77990: add thermal device support
  arm64: dts: renesas: r8a77990: Enable I2C DMA
  arm64: dts: renesas: r8a7796: Add CMT device nodes
  arm64: dts: renesas: r8a7796: add SSIU support for sound
  arm64: dts: renesas: r8a77990: Add I2C-DVFS device node
  arm64: dts: renesas: r8a77990: ebisu: Add and enable CAN,FD device nodes
  arm64: dts: renesas: r8a77965: Add CAN and CANFD controller nodes
  arm64: dts: renesas: r8a77990: ebisu: Add and enable PCIe device node
  arm64: dts: renesas: Add CPU capacity-dmips-mhz
  arm64: dts: renesas: Add CPU topology on R-Car Gen3 SoCs
  arm64: dts: renesas: r8a774a1: Replace clock magic numbers
  arm64: dts: renesas: r8a774a1: Replace power magic numbers
  arm64: dts: renesas: r8a7795: add SSIU support for sound
  arm64: dts: renesas: r8a77990: Fix VIN endpoint numbering
  arm64: dts: renesas: ebisu: Add and enable SDHI device nodes
  arm64: dts: renesas: ebisu: Add serial console pins
  arm64: dts: renesas: Switch eMMC bus to 1V8 on Salvator-X and ULCB
  arm64: dts: renesas: r8a77990: Add all HSCIF nodes
  arm64: dts: renesas: r8a779{7|8}0: add TMU support
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoMerge tag 'renesas-arm-dt-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel...
Olof Johansson [Fri, 30 Nov 2018 23:04:37 +0000 (15:04 -0800)]
Merge tag 'renesas-arm-dt-for-v4.21' of https://git./linux/kernel/git/horms/renesas into next/dt

Renesas ARM Based SoC DT Updates for v4.21

* RZ/N1D (r9a06g032) SoC:
  - Correct GIC DT node name
  - Enable pin controller

* RZ/G1C (r8a77470) iWave g23S single board computer
  - Add QSPI flash support
  - Add pinctl support for EtherAVB
  - Enable CMT0 (Renesas R-Car Compare Match Timer)
  - Enable RWDT (Renesas Watchdog Timer)
  - Enable uSD and eMMC support

* RZ/G1C (r8a77470) SoC:
  - Describe USB-DMAC and I2C devices in DT

* R-Mobile A1 (r8a7740), Emma Mobile EV2 (emev2) and
  SH-Mobile AG5 (sh72a0) SoCs:
  - Include SoC name in DTSI

* R-Car H2 (r8a7790) based lager, and
  R-Car M2-W (r8a7791) based koelsch and porter boards:
  - Disable unconnected LVDS encoders

* tag 'renesas-arm-dt-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: dts: r9a06g032: Correct the GIC DT node name
  ARM: dts: iwg23s-sbc: Add QSPI flash support
  ARM: dts: r8a77470: Add QSPI support
  ARM: dts: iwg23s-sbc: Add pinctl support for EtherAVB
  ARM: dts: iwg23s-sbc: Enable cmt0
  ARM: dts: r8a77470: Add CMT SoC specific support
  ARM: dts: r8a77470: Add USB-DMAC device nodes
  ARM: dts: iwg23s-sbc: Enable watchdog support
  ARM: dts: r8a77470: Add watchdog support to SoC dtsi
  ARM: dts: r8a7740, emev2, sh73a0: Include SoC name in DTSI
  ARM: dts: r8a779[01]: Disable unconnected LVDS encoders
  ARM: dts: iwg23s-sbc: Add uSD and eMMC support
  ARM: dts: r8a77470: Add SDHI1 support
  ARM: dts: r8a77470: Add SDHI0 support
  ARM: dts: r8a77470: Add I2C[0123] support
  ARM: dts: r9a06g032: Add pinctrl node

Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoMerge tag 'v4.21-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git...
Olof Johansson [Fri, 30 Nov 2018 23:04:01 +0000 (15:04 -0800)]
Merge tag 'v4.21-rockchip-dts64-1' of git://git./linux/kernel/git/mmind/linux-rockchip into next/dt

New dts for Gru-Scarlet (tablet device), default backlight brightness
for all Gru devices, rk3399 spi dma properties, some improvements for
the rk3399-sapphire board (fan, chosen, backlight), hs200 mode for the
emmc on the rock64 and declaring all cpu cores in the cooling maps
instead of just cpu0.

* tag 'v4.21-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: Add all CPUs in cooling maps
  arm64: dts: rockchip: add Gru Scarlet devicetrees
  arm64: dts: rockchip: move backlight from rk3399 sapphire to excavator
  arm64: dts: rockchip: Use default brightness table for rk3399-gru
  arm64: dts: rockchip: add chosen node on rk3399-sapphire
  arm64: dts: rockchip: enable HS200 for eMMC on rock64
  arm64: dts: rockchip: add fan on rk3399-sapphire board
  arm64: dts: rockchip: add rk3399 SPI DMAs

Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoMerge tag 'v4.21-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git...
Olof Johansson [Fri, 30 Nov 2018 23:03:39 +0000 (15:03 -0800)]
Merge tag 'v4.21-rockchip-dts32-1' of git://git./linux/kernel/git/mmind/linux-rockchip into next/dt

Powerdomain and QoS nodes for rk3066 and rk3188. A fix for a rock2
regulator name and referencing all cpus in the cooling maps instead
of only cpu0.

* tag 'v4.21-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: Add all CPUs in cooling maps
  ARM: dts: rockchip: Fix rk3288-rock2 vcc_flash name
  ARM: dts: rockchip: add rk3066/rk3188 power-domains
  ARM: dts: rockchip: add qos nodes found on rk3066 and rk3188
  dt-bindings: add power-domain header for RK3066 SoCs
  dt-bindings: add power-domain header for RK3188 SoCs

Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoMerge tag 'vexpress-updates-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git...
Olof Johansson [Fri, 30 Nov 2018 19:45:47 +0000 (11:45 -0800)]
Merge tag 'vexpress-updates-4.20' of git://git./linux/kernel/git/sudeep.holla/linux into next/dt

ARMv7 Vexpress updates for v4.20

Single patch to use updated coresight graph bindings thereby removing
loads of dtc warnings

* tag 'vexpress-updates-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  ARM: dts: vexpress/TC2: Update entries to match latest coresight bindings

Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoARM: dts: BCM5301X: Describe Northstar pins mux controller
Rafał Miłecki [Fri, 9 Nov 2018 08:56:49 +0000 (09:56 +0100)]
ARM: dts: BCM5301X: Describe Northstar pins mux controller

This describes hardware & will allow referencing pin functions. The
first usage is UART1 which allows supporting devices using it.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
3 years agoARM: dts: BCM5301X: Add basic DT for Linksys EA6500 V2
René Kjellerup [Mon, 1 Oct 2018 22:07:16 +0000 (15:07 -0700)]
ARM: dts: BCM5301X: Add basic DT for Linksys EA6500 V2

It is wireless home router based on BCM4708A0 with BCM4360 + BCM4331
wireless chipsets. The BCM4331 5GHz chip currently isn't supported only
due to missing compatible firmware.

Signed-off-by: Rene Kjellerup <rk.katana.steel@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
3 years agoarm64: dts: qcom: msm8998: Fix compatible of scm node
Bjorn Andersson [Fri, 30 Nov 2018 06:56:55 +0000 (22:56 -0800)]
arm64: dts: qcom: msm8998: Fix compatible of scm node

The scm binding and driver was updated to rely on the fallback to the
default qcom,scm for any modern SoC and as such both are required. Add
the default compatible to make the scm instance probe.

Fixes: d850156a226a ("arm64: dts: qcom: msm8998: Add firmware node")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
3 years agoarm64: dts: renesas: r8a7795-es1: Add missing power domains to IPMMU nodes
Geert Uytterhoeven [Thu, 29 Nov 2018 10:34:35 +0000 (11:34 +0100)]
arm64: dts: renesas: r8a7795-es1: Add missing power domains to IPMMU nodes

While commit 3b7e7848f0e88b36 ("arm64: dts: renesas: r8a7795: Add IPMMU
device nodes") for R-Car H3 ES2.0 did include power-domains properties,
they were forgotten in the counterpart for older R-Car H3 ES1.x SoCs.

Fixes: e4b9a493df45075b ("arm64: dts: renesas: r8a7795-es1: Add IPMMU device nodes")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
3 years agoarm64: dts: renesas: r8a77965: Remove non-existent IPMMU-IR
Geert Uytterhoeven [Thu, 29 Nov 2018 10:34:34 +0000 (11:34 +0100)]
arm64: dts: renesas: r8a77965: Remove non-existent IPMMU-IR

The R-Car Gen3 HardWare Manual Errata for Rev. 1.00 (Aug 24, 2018)
removed the IPMMU-IR IOMMU instance on R-Car M3-N, as this SoC does not
have an Image Processing Unit (IMP-X5) nor the A3IR power domain.

Fixes: 55697cbb44e4f7ea ("arm64: dts: renesas: r8a779{65,80,90}: Add IPMMU devices nodes")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
3 years agoarm64: dts: qcom: msm8998: Add SDC2 control pins
Jeffrey Hugo [Thu, 15 Nov 2018 17:18:10 +0000 (10:18 -0700)]
arm64: dts: qcom: msm8998: Add SDC2 control pins

The SDC2 control pins are typically used to manage sleep.

Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
3 years agoarm64: dts: qcom: msm8998-mtp: Add external SD
Jeffrey Hugo [Thu, 15 Nov 2018 17:18:11 +0000 (10:18 -0700)]
arm64: dts: qcom: msm8998-mtp: Add external SD

The externally accessible SD card slot on the MTP is driven by SDCC2.
Wire it up for use.

Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
3 years agoarm64: dts: qcom: msm8998: Add SDCC2
Jeffrey Hugo [Thu, 15 Nov 2018 17:18:09 +0000 (10:18 -0700)]
arm64: dts: qcom: msm8998: Add SDCC2

SDCC2 is typically used as the controller for an external SD card slot.

Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
3 years agoarm64: dts: qcom: msm8998: correct xo clock name
Jeffrey Hugo [Thu, 15 Nov 2018 17:18:08 +0000 (10:18 -0700)]
arm64: dts: qcom: msm8998: correct xo clock name

The root parent clock of most msm8998 clock is the "xo" clock.  The DT node
is incorrectly named "xo_board", which prevents Linux from correctly
parsing the clock tree, resulting in most clocks being unparented and
unable to be manipulated.  The end result is that we can't turn on clocks
for peripherals like SD, so init usually fails.

Fixes: 4807c71cc688 (arm64: dts: Add msm8998 SoC and MTP board support)
Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
3 years agoMerge branch 'qcs404-topic-revised' into arm64-for-4.21-3
Andy Gross [Fri, 30 Nov 2018 01:28:48 +0000 (19:28 -0600)]
Merge branch 'qcs404-topic-revised' into arm64-for-4.21-3

3 years agoMerge branch 'arm64-for-4.21' into arm64-for-4.21-3
Andy Gross [Fri, 30 Nov 2018 01:25:42 +0000 (19:25 -0600)]
Merge branch 'arm64-for-4.21' into arm64-for-4.21-3

3 years agoMerge tag 'qcom-fixes-for-4.20-rc1' into arm64-for-4.21-3
Andy Gross [Fri, 30 Nov 2018 01:25:23 +0000 (19:25 -0600)]
Merge tag 'qcom-fixes-for-4.20-rc1' into arm64-for-4.21-3

Qualcomm ARM64 DT Fixes for 4.20-rc1

* Fix reserved gpio ranges for SDM845 and MSM8998

3 years agoarm64: dts: meson-gx: Add Internal Clock Measurer node
Neil Armstrong [Sun, 18 Nov 2018 13:50:24 +0000 (14:50 +0100)]
arm64: dts: meson-gx: Add Internal Clock Measurer node

The Amlogic Meson GX SoCs embeds a clock measurer IP to measure the internal
clock paths frequencies.
This patch adds the node in the top-level meson-gx dtsi.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>