muen/linux.git
15 months agoALSA: hda/realtek - Enable the bass speaker of ASUS UX431FLC
Chris Chiu [Mon, 30 Dec 2019 03:11:18 +0000 (11:11 +0800)]
ALSA: hda/realtek - Enable the bass speaker of ASUS UX431FLC

ASUS reported that there's an bass speaker in addition to internal
speaker and it uses DAC 0x02. It was not enabled in the commit
436e25505f34 ("ALSA: hda/realtek - Enable internal speaker of ASUS
UX431FLC") which only enables the amplifier and the front speaker.
This commit enables the bass speaker on top of the aforementioned
work to improve the acoustic experience.

Fixes: 436e25505f34 ("ALSA: hda/realtek - Enable internal speaker of ASUS UX431FLC")
Signed-off-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191230031118.95076-1-chiu@endlessm.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
15 months agoALSA: ice1724: Fix sleep-in-atomic in Infrasonic Quartet support code
Takashi Iwai [Wed, 18 Dec 2019 19:26:06 +0000 (20:26 +0100)]
ALSA: ice1724: Fix sleep-in-atomic in Infrasonic Quartet support code

Jia-Ju Bai reported a possible sleep-in-atomic scenario in the ice1724
driver with Infrasonic Quartet support code: namely, ice->set_rate
callback gets called inside ice->reg_lock spinlock, while the callback
in quartet.c holds ice->gpio_mutex.

This patch fixes the invalid call: it simply moves the calls of
ice->set_rate and ice->set_mclk callbacks outside the spinlock.

Reported-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/5d43135e-73b9-a46a-2155-9e91d0dcdf83@gmail.com
Link: https://lore.kernel.org/r/20191218192606.12866-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
15 months agoALSA: hda/realtek - Add Bass Speaker and fixed dac for bass speaker
Kailang Yang [Thu, 19 Dec 2019 06:12:15 +0000 (14:12 +0800)]
ALSA: hda/realtek - Add Bass Speaker and fixed dac for bass speaker

Dell has new platform which has dual speaker connecting.
They want dual speaker which use same dac for output.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/229c7efa2b474a16b7d8a916cd096b68@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
15 months agoALSA: hda - Apply sync-write workaround to old Intel platforms, too
Takashi Iwai [Mon, 23 Dec 2019 22:18:16 +0000 (23:18 +0100)]
ALSA: hda - Apply sync-write workaround to old Intel platforms, too

Klaus Ethgen reported occasional high CPU usages in his system that
seem caused by HD-audio driver.  The perf output revealed that it's
in the unsolicited event handling in the workqueue, and the problem
seems triggered by some communication stall between the controller and
the codec at the runtime or system resume.

Actually a similar phenomenon was seen in the past for other Intel
platforms, and we already applied the workaround to enforce sync-write
for CORB/RIRB verbs for Skylake and newer chipsets (commit
2756d9143aa5 "ALSA: hda - Fix intermittent CORB/RIRB stall on Intel
chips").  Fortunately, the same workaround is applicable to the old
chipset, and the experiment showed the positive effect.

Based on the experiment result, this patch enables the sync-write
workaround for all Intel chipsets.  The only reason I hesitated to
apply this workaround was about the possibly slightly higher CPU usage.
But if the lack of sync causes a much severer problem even for quite
old chip, we should think this would be necessary for all Intel chips.

Reported-by: Klaus Ethgen <Klaus@ethgen.ch>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191223171833.GA17053@chua
Link: https://lore.kernel.org/r/20191223221816.32572-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
15 months agoALSA: hda/hdmi - fix atpx_present when CLASS is not VGA
Alex Deucher [Sat, 21 Dec 2019 00:17:02 +0000 (19:17 -0500)]
ALSA: hda/hdmi - fix atpx_present when CLASS is not VGA

You can't use PCI_BASE_CLASS with pci_get_class().  This
happens to work by luck on devices with PCI_CLASS_DISPLAY_VGA, but
misses PCI_CLASS_DISPLAY_OTHER.  Add a check for those as well.

Fixes: 586bc4aab878 ("ALSA: hda/hdmi - fix vgaswitcheroo detection for AMD")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20191221001702.1338587-1-alexander.deucher@amd.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 months agoALSA: usb-audio: fix set_format altsetting sanity check
Johan Hovold [Fri, 20 Dec 2019 09:31:34 +0000 (10:31 +0100)]
ALSA: usb-audio: fix set_format altsetting sanity check

Make sure to check the return value of usb_altnum_to_altsetting() to
avoid dereferencing a NULL pointer when the requested alternate settings
is missing.

The format altsetting number may come from a quirk table and there does
not seem to be any other validation of it (the corresponding index is
checked however).

Fixes: b099b9693d23 ("ALSA: usb-audio: Avoid superfluous usb_set_interface() calls")
Cc: stable <stable@vger.kernel.org> # 4.18
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191220093134.1248-1-johan@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 months agoALSA: hda/realtek - Add headset Mic no shutup for ALC283
Kailang Yang [Mon, 9 Dec 2019 07:56:15 +0000 (15:56 +0800)]
ALSA: hda/realtek - Add headset Mic no shutup for ALC283

Chrome machine had humming noise from external speaker plugin at
codec D3 state.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/2692449396954c6c968f5b75e2660358@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 months agoALSA: usb-audio: set the interface format after resume on Dell WD19
Hui Wang [Wed, 18 Dec 2019 13:26:50 +0000 (21:26 +0800)]
ALSA: usb-audio: set the interface format after resume on Dell WD19

Recently we found the headset-mic on the Dell Dock WD19 doesn't work
anymore after s3 (s2i or deep), this problem could be workarounded by
closing (pcm_close) the app and then reopening (pcm_open) the app, so
this bug is not easy to be detected by users.

When problem happens, retire_capture_urb() could still be called
periodically, but the size of captured data is always 0, it could be
a firmware bug on the dock. Anyway I found after resuming, the
snd_usb_pcm_prepare() will be called, and if we forcibly run
set_format() to set the interface and its endpoint, the capture
size will be normal again. This problem and workaound also apply to
playback.

To fix it in the kernel, add a quirk to let set_format() run
forcibly once after resume.

Signed-off-by: Hui Wang <hui.wang@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191218132650.6303-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 months agoMerge tag 'asoc-fix-v5.5-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git...
Takashi Iwai [Tue, 17 Dec 2019 13:18:32 +0000 (14:18 +0100)]
Merge tag 'asoc-fix-v5.5-rc2' of https://git./linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.5

A collection of fixes since the merge window, mostly driver specific but
there's a few in the core that clean up fallout from the refactorings
done in the last cycle.

16 months agoALSA: hda - Downgrade error message for single-cmd fallback
Takashi Iwai [Mon, 16 Dec 2019 15:12:24 +0000 (16:12 +0100)]
ALSA: hda - Downgrade error message for single-cmd fallback

We made the error message for the CORB/RIRB communication clearer by
upgrading to dev_WARN() so that user can notice better.  But this
struck us like a boomerang: now it caught syzbot and reported back as
a fatal issue although it's not really any too serious bug that worth
for stopping the whole system.

OK, OK, let's be softy, downgrade it to the standard dev_err() again.

Fixes: dd65f7e19c69 ("ALSA: hda - Show the fatal CORB/RIRB error more clearly")
Reported-by: syzbot+b3028ac3933f5c466389@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20191216151224.30013-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 months agoASoC: wm8962: fix lambda value
Shengjiu Wang [Wed, 11 Dec 2019 11:57:22 +0000 (19:57 +0800)]
ASoC: wm8962: fix lambda value

According to user manual, it is required that FLL_LAMBDA > 0
in all cases (Integer and Franctional modes).

Fixes: 9a76f1ff6e29 ("ASoC: Add initial WM8962 CODEC driver")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/1576065442-19763-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
16 months agoALSA: hda: Fix regression by strip mask fix
Takashi Iwai [Sat, 14 Dec 2019 17:52:17 +0000 (18:52 +0100)]
ALSA: hda: Fix regression by strip mask fix

The commit e38e486d66e2 ("ALSA: hda: Modify stream stripe mask only
when needed") tried to address the regression by the unconditional
application of the stripe mask, but this caused yet another
regression for the previously working devices.  Namely, the patch
clears the azx_dev->stripe flag at snd_hdac_stream_clear(), but this
may be called multiple times before restarting the stream, so this
ended up with clearance of the flag for the whole time.

This patch fixes the regression by moving the azx_dev->stripe flag
clearance at the counter-part, the close callback of HDMI codec
driver instead.

Fixes: e38e486d66e2 ("ALSA: hda: Modify stream stripe mask only when needed")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205855
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204477
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191214175217.31852-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 months agoALSA: hda/ca0132 - Fix work handling in delayed HP detection
Takashi Iwai [Fri, 13 Dec 2019 08:51:11 +0000 (09:51 +0100)]
ALSA: hda/ca0132 - Fix work handling in delayed HP detection

CA0132 has the delayed HP jack detection code that is invoked from the
unsol handler, but it does a few weird things: it contains the cancel
of a work inside the work handler, and yet it misses the cancel-sync
call at (runtime-)suspend.  This patch addresses those issues.

Fixes: 15c2b3cc09a3 ("ALSA: hda/ca0132 - Fix possible workqueue stall")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191213085111.22855-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 months agoALSA: hda/ca0132 - Avoid endless loop
Takashi Iwai [Fri, 13 Dec 2019 08:51:10 +0000 (09:51 +0100)]
ALSA: hda/ca0132 - Avoid endless loop

Introduce a timeout to dspio_clear_response_queue() so that it won't
be caught in an endless loop even if the hardware doesn't respond
properly.

Fixes: a73d511c4867 ("ALSA: hda/ca0132: Add unsol handler for DSP and jack detection")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191213085111.22855-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 months agoALSA: hda/ca0132 - Keep power on during processing DSP response
Takashi Iwai [Fri, 13 Dec 2019 08:51:09 +0000 (09:51 +0100)]
ALSA: hda/ca0132 - Keep power on during processing DSP response

We need to keep power on while processing the DSP response via unsol
event.  Each snd_hda_codec_read() call does the power management, so
it should work normally, but still it's safer to keep the power up for
the whole function.

Fixes: a73d511c4867 ("ALSA: hda/ca0132: Add unsol handler for DSP and jack detection")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191213085111.22855-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 months agoALSA: pcm: Avoid possible info leaks from PCM stream buffers
Takashi Iwai [Wed, 11 Dec 2019 15:57:42 +0000 (16:57 +0100)]
ALSA: pcm: Avoid possible info leaks from PCM stream buffers

The current PCM code doesn't initialize explicitly the buffers
allocated for PCM streams, hence it might leak some uninitialized
kernel data or previous stream contents by mmapping or reading the
buffer before actually starting the stream.

Since this is a common problem, this patch simply adds the clearance
of the buffer data at hw_params callback.  Although this does only
zero-clear no matter which format is used, which doesn't mean the
silence for some formats, but it should be OK because the intention is
just to clear the previous data on the buffer.

Reported-by: Lionel Koenig <lionel.koenig@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191211155742.3213-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 months agoALSA: hda/realtek - Line-out jack doesn't work on a Dell AIO
Hui Wang [Wed, 11 Dec 2019 05:13:21 +0000 (13:13 +0800)]
ALSA: hda/realtek - Line-out jack doesn't work on a Dell AIO

After applying the fixup ALC274_FIXUP_DELL_AIO_LINEOUT_VERB, the
Line-out jack works well. And instead of adding a new set of pin
definition in the pin_fixup_tbl, we put a more generic matching entry
in the fallback_pin_fixup_tbl.

Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20191211051321.5883-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 months agoALSA: hda/hdmi - Fix duplicate unref of pci_dev
Lukas Wunner [Tue, 10 Dec 2019 13:39:50 +0000 (14:39 +0100)]
ALSA: hda/hdmi - Fix duplicate unref of pci_dev

Nicholas Johnson reports a null pointer deref as well as a refcount
underflow upon hot-removal of a Thunderbolt-attached AMD eGPU.
He's bisected the issue down to commit 586bc4aab878 ("ALSA: hda/hdmi -
fix vgaswitcheroo detection for AMD").

The commit iterates over PCI devices using pci_get_class() and
unreferences each device found, even though pci_get_class()
subsequently unreferences the device as well.  Fix it.

Fixes: 586bc4aab878 ("ALSA: hda/hdmi - fix vgaswitcheroo detection for AMD")
Link: https://lore.kernel.org/r/PSXP216MB0438BFEAA0617283A834E11580580@PSXP216MB0438.KORP216.PROD.OUTLOOK.COM/
Reported-and-tested-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Alexander Deucher <alexander.deucher@amd.com>
Cc: Bjorn Helgaas <helgaas@kernel.org>
Link: https://lore.kernel.org/r/77aa6c01aefe1ebc4004e87b0bc714f2759f15c4.1575985006.git.lukas@wunner.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 months agoASoC: Intel: common: work-around incorrect ACPI HID for CML boards
Amery Song [Tue, 10 Dec 2019 00:48:54 +0000 (18:48 -0600)]
ASoC: Intel: common: work-around incorrect ACPI HID for CML boards

On CML boards with the RT5682 headset codec and RT1011 speaker
amplifier, the platform firmware exposes three ACPI HIDs
(10EC568210EC1011 and MX98357A). The last HID is a mistake in
DSDT tables, which causes the wrong machine driver to be loaded.

This patch changes the key used to identify boards and changes the
order of entries in the table to load the correct machine driver.
The order does matter and should not be modified to work-around this
firmware issue.

Signed-off-by: Amery Song <chao.song@intel.com>
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191210004854.16845-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
16 months agoASoC: SOF: Intel: split cht and byt debug window sizes
Curtis Malainey [Tue, 10 Dec 2019 00:48:52 +0000 (18:48 -0600)]
ASoC: SOF: Intel: split cht and byt debug window sizes

Turns out SSP 3-5 are only available on cht, to avoid dumping on
undefined registers let's split the definition.

Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191210004854.16845-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
16 months agoASoC: SOF: loader: fix snd_sof_fw_parse_ext_data
Karol Trzcinski [Tue, 10 Dec 2019 00:48:49 +0000 (18:48 -0600)]
ASoC: SOF: loader: fix snd_sof_fw_parse_ext_data

An error occurs during parsing more than one ext_data from the mailbox, because
of invalid data offset handling. Fix by removing the incorrect duplicate
increment of the offset.

The return value is also reset in the switch case. This does not change the
behavior but improves readability - there is no longer a need to check what the
return value of get_ext_windows is.

Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Signed-off-by: Bartosz Kokoszko <bartoszx.kokoszko@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191210004854.16845-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
16 months agoASoC: SOF: loader: snd_sof_fw_parse_ext_data log warning on unknown header
Karol Trzcinski [Tue, 10 Dec 2019 00:48:48 +0000 (18:48 -0600)]
ASoC: SOF: loader: snd_sof_fw_parse_ext_data log warning on unknown header

Added warning log when found some unknown FW boot ext header,
to improve debuggability.

Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191210004854.16845-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
16 months agoASoC: simple-card: Don't create separate link when platform is present
Daniel Baluta [Mon, 9 Dec 2019 13:53:53 +0000 (15:53 +0200)]
ASoC: simple-card: Don't create separate link when platform is present

In normal sound case all DAIs are detected as CPU-Codec.
simple_dai_link_of supports the presence of a platform but it counts
it as a CPU DAI resulting in the creation of an extra link.

Adding a platform property to a link description like:

simple-audio-card,dai-link {
cpu {
sound-dai = <&sai1>;
};
plat {
sound-dai = <&dsp>;
};
codec {
sound-dai = <&wm8960>;
}

will result in the creation of two links:
* sai1 <-> wm8960
* dsp  <-> wm8960

which is obviously not what we want. We just want one single link
with:
* sai1 <-> wm8960 (and platform set to dsp).

Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20191209135353.17427-1-daniel.baluta@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
16 months agoASoC: topology: Check return value for soc_tplg_pcm_create()
Dragos Tarcatu [Tue, 10 Dec 2019 00:39:39 +0000 (18:39 -0600)]
ASoC: topology: Check return value for soc_tplg_pcm_create()

The return value of soc_tplg_pcm_create() is currently not checked
in soc_tplg_pcm_elems_load(). If an error is to occur there, the
topology ignores it and continues loading.

Fix that by checking the status and rejecting the topology on error.

Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Dragos Tarcatu <dragos_tarcatu@mentor.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191210003939.15752-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
16 months agoASoC: topology: Check return value for snd_soc_add_dai_link()
Dragos Tarcatu [Tue, 10 Dec 2019 00:39:38 +0000 (18:39 -0600)]
ASoC: topology: Check return value for snd_soc_add_dai_link()

snd_soc_add_dai_link() might fail. This situation occurs for
instance in a very specific use case where a PCM device and a
Back End DAI link are given identical names in the topology.
When this happens, soc_new_pcm_runtime() fails and then
snd_soc_add_dai_link() returns -ENOMEM when called from
soc_tplg_fe_link_create(). Because of that, the link will not
get added into the card list, so any attempt to remove it later
ends up in a panic.

Fix that by checking the return status and free the memory in case
of an error.

Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Dragos Tarcatu <dragos_tarcatu@mentor.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191210003939.15752-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
16 months agoALSA: fireface: fix return value in error path of isochronous resources reservation
Takashi Sakamoto [Mon, 9 Dec 2019 15:05:41 +0000 (00:05 +0900)]
ALSA: fireface: fix return value in error path of isochronous resources reservation

Even if isochronous resources reservation fails, error code doesn't return
in pcm.hw_params callback.

Cc: <stable@vger.kernel.org> #5.3+
Fixes: 55162d2bb0e8 ("ALSA: fireface: reserve/release isochronous resources in pcm.hw_params/hw_free callbacks")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191209151655.GA8090@workstation
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 months agoALSA: oxfw: fix return value in error path of isochronous resources reservation
Takashi Sakamoto [Mon, 9 Dec 2019 15:03:04 +0000 (00:03 +0900)]
ALSA: oxfw: fix return value in error path of isochronous resources reservation

Even if isochronous resources reservation fails, error code doesn't return
in pcm.hw_params callback.

Cc: <stable@vger.kernel.org> #5.3+
Fixes: 4f380d007052 ("ALSA: oxfw: configure packet format in pcm.hw_params callback")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191209151655.GA8090@workstation
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 months agoASoC: core: only flush inited work during free
Curtis Malainey [Thu, 28 Nov 2019 01:13:58 +0000 (17:13 -0800)]
ASoC: core: only flush inited work during free

There are many paths to soc_free_pcm_runtime which can both have and
have not yet inited the workqueue yet. When we flush the queue when we
have not yet inited the queue we cause warnings to be printed.

An example is soc_cleanup_card_resources which is called by
snd_soc_bind_card which has multiple failure points before and after
soc_link_init -> soc_new_pcm which is where the queue is inited.

Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20191128011358.39234-1-cujomalainey@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
16 months agoALSA: firewire-motu: fix double unlocked 'motu->mutex'
Takashi Sakamoto [Sun, 8 Dec 2019 23:22:26 +0000 (08:22 +0900)]
ALSA: firewire-motu: fix double unlocked 'motu->mutex'

Mutex is doubly unlocked in some error path of pcm.open. This commit fixes
ALSA firewire-motu driver in Linux kernel v5.5.

Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 3fd80b200388 ("ALSA: firewire-motu: use the same size of period for PCM substream in AMDTP streams")
Fixes: 0f5482e7875b ("ALSA: firewire-motu: share PCM buffer size for both direction")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191208232226.6685-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 months agoALSA: echoaudio: simplify get_audio_levels
Olof Johansson [Sat, 7 Dec 2019 22:49:53 +0000 (14:49 -0800)]
ALSA: echoaudio: simplify get_audio_levels

The loop optimizer seems to go astray here, and produces some warnings
that don't seem valid.

Still, the code can be simplified -- just clear the whole array at the
beginning, and fill in whatever values are valid on the platform.

Warnings before this change (GCC 8.2.0 ARM allmodconfig):

In file included from ../sound/pci/echoaudio/gina24.c:115:
../sound/pci/echoaudio/echoaudio.c: In function 'snd_echo_vumeters_get':
../sound/pci/echoaudio/echoaudio_dsp.c:647:9: warning: iteration 1073741824 invokes undefined behavior [-Waggressive-loop-optimizations]
In file included from ../sound/pci/echoaudio/layla24.c:112:
../sound/pci/echoaudio/echoaudio.c: In function 'snd_echo_vumeters_get':
../sound/pci/echoaudio/echoaudio_dsp.c:658:9: warning: iteration 1073741824 invokes undefined behavior [-Waggressive-loop-optimizations]
../sound/pci/echoaudio/echoaudio_dsp.c:647:9: warning: iteration 1073741824 invokes undefined behavior [-Waggressive-loop-optimizations]

Signed-off-by: Olof Johansson <olof@lixom.net>
Link: https://lore.kernel.org/r/20191207224953.25944-1-olof@lixom.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 months agoALSA: pcm: oss: Avoid potential buffer overflows
Takashi Iwai [Wed, 4 Dec 2019 14:48:24 +0000 (15:48 +0100)]
ALSA: pcm: oss: Avoid potential buffer overflows

syzkaller reported an invalid access in PCM OSS read, and this seems
to be an overflow of the internal buffer allocated for a plugin.
Since the rate plugin adjusts its transfer size dynamically, the
calculation for the chained plugin might be bigger than the given
buffer size in some extreme cases, which lead to such an buffer
overflow as caught by KASAN.

Fix it by limiting the max transfer size properly by checking against
the destination size in each plugin transfer callback.

Reported-by: syzbot+f153bde47a62e0b05f83@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191204144824.17801-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 months agoASoC: Intel: bytcr_rt5640: Update quirk for Teclast X89
Hans de Goede [Tue, 3 Dec 2019 22:14:42 +0000 (23:14 +0100)]
ASoC: Intel: bytcr_rt5640: Update quirk for Teclast X89

When the Teclast X89 quirk was added we did not have jack-detection
support yet.

Note the over-current detection limit is set to 2mA instead of the usual
1.5mA because this tablet tends to give false-positive button-presses
when it is set to 1.5mA.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191203221442.2657-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
16 months agoASoC: core: Init pcm runtime work early to avoid warnings
Curtis Malainey [Tue, 3 Dec 2019 17:30:07 +0000 (09:30 -0800)]
ASoC: core: Init pcm runtime work early to avoid warnings

There are cases where we fail before we reach soc_new_pcm which would
init the workqueue. When we fail we attempt to flush the queue which
generates warnings from the workqueue subsystem when we have not inited
the queue. Solution is to use a proxy function to get around this issue.

Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20191203173007.46504-1-cujomalainey@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
16 months agoALSA: hda: hdmi - Keep old slot assignment behavior for Intel platforms
Takashi Iwai [Tue, 3 Dec 2019 15:41:05 +0000 (16:41 +0100)]
ALSA: hda: hdmi - Keep old slot assignment behavior for Intel platforms

The commit 609f5485344b ("ALSA: hda: hdmi - preserve non-MST PCM
routing for Intel platforms") tried to restore the old behavior wrt
assignment of the PCM slot for Intel platforms, but this didn't do it
right.  As found in the later discussion, a positive pipe id on Intel
platforms can be passed for single monitor attachment case.

This patch reverts the previous attempt and applies a simpler
workaround instead.  Actually, for Intel platforms, we can handle as
if per_pin->dev_id=0, assign the primary slot at the first try.  This
assures the compatible behavior with the previous versions regarding
the slot assignment.

Fixes: 609f5485344b ("ALSA: hda: hdmi - preserve non-MST PCM routing for Intel platforms")
Link: https://lore.kernel.org/r/20191203154105.30414-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 months agoASoC: Intel: sst: Add missing include <linux/io.h>
YueHaibing [Thu, 28 Nov 2019 13:58:53 +0000 (21:58 +0800)]
ASoC: Intel: sst: Add missing include <linux/io.h>

Fix build error:

sound/soc/intel/atom/sst/sst.c: In function intel_sst_interrupt_mrfld:
sound/soc/intel/atom/sst/sst.c:93:5: error: implicit declaration of function memcpy_fromio;
 did you mean memcpy32_fromio? [-Werror=implicit-function-declaration]
     memcpy_fromio(msg->mailbox_data,
     ^~~~~~~~~~~~~
     memcpy32_fromio

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191128135853.8360-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
16 months agoALSA: hda: Modify stream stripe mask only when needed
Takashi Iwai [Mon, 2 Dec 2019 07:49:47 +0000 (08:49 +0100)]
ALSA: hda: Modify stream stripe mask only when needed

The recent commit in HD-audio stream management for changing the
stripe control seems causing a regression on some platforms.  The
stripe control is currently used only by HDMI codec, and applying the
stripe mask unconditionally may lead to scratchy and static noises as
seen on some MacBooks.

For addressing the regression, this patch changes the stream
management code to apply the stripe mask conditionally only when the
codec driver requested.

Fixes: 9b6f7e7a296e ("ALSA: hda: program stripe bits for controller")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204477
Tested-by: Michael Pobega <mpobega@neverware.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191202074947.1617-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 months agoALSA: hda - fixup for the bass speaker on Lenovo Carbon X1 7th gen
Jaroslav Kysela [Fri, 29 Nov 2019 14:40:27 +0000 (15:40 +0100)]
ALSA: hda - fixup for the bass speaker on Lenovo Carbon X1 7th gen

The auto-parser assigns the bass speaker to DAC3 (NID 0x06) which
is without the volume control. I do not see a reason to use DAC2,
because the shared output to all speakers produces the sufficient
and well balanced sound. The stereo support is enough for this
purpose (laptop).

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20191129144027.14765-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 months agoALSA: hda: hdmi - preserve non-MST PCM routing for Intel platforms
Kai Vehmanen [Fri, 29 Nov 2019 14:37:56 +0000 (16:37 +0200)]
ALSA: hda: hdmi - preserve non-MST PCM routing for Intel platforms

Commit 5398e94fb753 ("ALSA: hda - Add DP-MST support for NVIDIA codecs")
introduced a slight change of behaviour how non-MST monitors are
assigned to PCMs on Intel platforms.

In the drm_audio_component.h interface, the third parameter
to pin_eld_notify() is pipe number. On Intel platforms, this value
is -1 for MST. On other platforms, a non-zero pipe id is used to
signal MST use.

This difference leads to some subtle differences in hdmi_find_pcm_slot()
with regards to how non-MST monitors are assigned to PCMs.
This patch restores the original behaviour on Intel platforms while
keeping the new allocation policy on other platforms.

Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20191129143756.23941-2-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 months agoALSA: hda: hdmi - fix kernel oops caused by invalid PCM idx
Kai Vehmanen [Fri, 29 Nov 2019 14:37:55 +0000 (16:37 +0200)]
ALSA: hda: hdmi - fix kernel oops caused by invalid PCM idx

Add additional check in hdmi_find_pcm_slot() to not return
a pcm index that points to unallocated pcm. This could happen
if codec driver is set up in codec->mst_no_extra_pcms mode.
On some platforms, this leads to a kernel oops in snd_ctl_notify(),
called via update_eld().

BugLink: https://github.com/thesofproject/linux/issues/1536
Fixes: 5398e94fb753 ALSA: hda - Add DP-MST support for NVIDIA codecs
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20191129143756.23941-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 months agoALSA: hda/realtek - Fix inverted bass GPIO pin on Acer 8951G
Takashi Iwai [Thu, 28 Nov 2019 20:26:30 +0000 (21:26 +0100)]
ALSA: hda/realtek - Fix inverted bass GPIO pin on Acer 8951G

We've added the bass speaker support on Acer 8951G by the commit
00066e9733f6 ("Add Acer Aspire Ethos 8951G model quirk"), but it seems
that the GPIO pin was wrongly set: while the commit turns off the bit
to power up the amp, the actual hardware reacts other way round,
i.e. GPIO bit on = amp on.

So this patch fixes the bug, turning on the GPIO bit 0x02 as default.
Since turning on the GPIO bit can be more easily managed with
alc_setup_gpio() call, we simplify the quirk code by integrating the
GPIO setup into the existing alc662_fixup_aspire_ethos_hp() and
dropping the whole ALC669_FIXUP_ACER_ASPIRE_ETHOS_SUBWOOFER quirk.

Fixes: 00066e9733f6 ("Add Acer Aspire Ethos 8951G model quirk")
Reported-and-tested-by: Sergey 'Jin' Bostandzhyan <jin@mediatomb.cc>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191128202630.6626-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 months agoALSA: hda/realtek - Dell headphone has noise on unmute for ALC236
Kailang Yang [Tue, 26 Nov 2019 09:04:23 +0000 (17:04 +0800)]
ALSA: hda/realtek - Dell headphone has noise on unmute for ALC236

headphone have noise even the volume is very small.
Let it fill up pcbeep hidden register to default value.
The issue was gone.

Fixes: 4344aec84bd8 ("ALSA: hda/realtek - New codec support for ALC256")
Fixes: 736f20a70608 ("ALSA: hda/realtek - Add support for ALC236/ALC3204")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/9ae47f23a64d4e41a9c81e263cd8a250@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 months agoALSA: hda: hdmi - fix regression in connect list handling
Kai Vehmanen [Wed, 27 Nov 2019 16:12:40 +0000 (18:12 +0200)]
ALSA: hda: hdmi - fix regression in connect list handling

Fix regression in how intel_haswell_fixup_connect_list()
results are used in hda_read_pin_conn(). Use of
snd_hda_get_raw_connections() in hda_read_pin_conn() bypasses
the cache and thus also bypasses the overridden pin connection
list. On platforms that require the connection list fixup,
mux list will be empty and HDMI playback will fail to -EBUSY
at open.

Fix the regression in hda_read_pinn_conn(). Simplify code
as suggested by Takashi Iwai to remove old
intel_haswell_fixup_connect_list() and copy the cvt_nid list
directly and not use snd_hda_override_conn_list() at all.

Fixes: 9c32fea83692 ("ALSA: hda - Add DP-MST support for non-acomp codecs")
BugLink: https://github.com/thesofproject/linux/issues/1537
Cc: Nikhil Mahale <nmahale@nvidia.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20191127161240.17026-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 months agoASoC: max98090: fix possible race conditions
Tzung-Bi Shih [Fri, 22 Nov 2019 07:31:14 +0000 (15:31 +0800)]
ASoC: max98090: fix possible race conditions

max98090_interrupt() and max98090_pll_work() run in 2 different threads.
There are 2 possible races:

Note: M98090_REG_DEVICE_STATUS = 0x01.
Note: ULK == 0, PLL is locked; ULK == 1, PLL is unlocked.

max98090_interrupt      max98090_pll_work
----------------------------------------------
schedule max98090_pll_work
                        restart max98090 codec
receive ULK INT
                        assert ULK == 0
schedule max98090_pll_work (1).

In the case (1), the PLL is locked but max98090_interrupt unnecessarily
schedules another max98090_pll_work.

max98090_interrupt      max98090_pll_work      max98090 codec
----------------------------------------------------------------------
                                               ULK = 1
receive ULK INT
read 0x01
                                               ULK = 0 (clear on read)
schedule max98090_pll_work
                        restart max98090 codec
                                               ULK = 1
receive ULK INT
read 0x01
                                               ULK = 0 (clear on read)
                        read 0x01
                        assert ULK == 0 (2).

In the case (2), both max98090_interrupt and max98090_pll_work read
the same clear-on-read register.  max98090_pll_work would falsely
thought PLL is locked.
Note: the case (2) race is introduced by the previous commit ("ASoC:
max98090: exit workaround earlier if PLL is locked") to check the status
and exit the loop earlier in max98090_pll_work.

There are 2 possible solution options:
A. turn off ULK interrupt before scheduling max98090_pll_work; and turn
on again before exiting max98090_pll_work.
B. remove the second thread of execution.

Option A cannot fix the case (2) race because it still has 2 threads
access the same clear-on-read register simultaneously.  Although we
could suppose the register is volatile and read the status via I2C could
be much slower than the hardware raises the bits.

Option B introduces a maximum 10~12 msec penalty delay in the interrupt
handler.  However, it could only punish the jack detection by extra
10~12 msec.

Adopts option B which is the better solution overall.

Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20191122073114.219945-4-tzungbi@google.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
16 months agoASoC: max98090: exit workaround earlier if PLL is locked
Tzung-Bi Shih [Fri, 22 Nov 2019 07:31:13 +0000 (15:31 +0800)]
ASoC: max98090: exit workaround earlier if PLL is locked

According to the datasheet, PLL lock time typically takes 2 msec and
at most takes 7 msec.

Check the lock status every 1 msec and exit the workaround if PLL is
locked.

Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20191122073114.219945-3-tzungbi@google.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
16 months agoASoC: max98090: remove msleep in PLL unlocked workaround
Tzung-Bi Shih [Fri, 22 Nov 2019 07:31:12 +0000 (15:31 +0800)]
ASoC: max98090: remove msleep in PLL unlocked workaround

It was observed Baytrail-based chromebooks could cause continuous PLL
unlocked when using playback stream and capture stream simultaneously.
Specifically, starting a capture stream after started a playback stream.
As a result, the audio data could corrupt or turn completely silent.

As the datasheet suggested, the maximum PLL lock time should be 7 msec.
The workaround resets the codec softly by toggling SHDN off and on if
PLL failed to lock for 10 msec.  Notably, there is no suggested hold
time for SHDN off.

On Baytrail-based chromebooks, it would easily happen continuous PLL
unlocked if there is a 10 msec delay between SHDN off and on.  Removes
the msleep().

Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20191122073114.219945-2-tzungbi@google.com
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
16 months agoASoC: wm8904: fix automatic sysclk configuration
Michael Walle [Fri, 22 Nov 2019 23:25:32 +0000 (00:25 +0100)]
ASoC: wm8904: fix automatic sysclk configuration

The simple-card tries to signal the codec to disable rate constraints,
see commit 2458adb8f92a ("SoC: simple-card-utils: set 0Hz to sysclk when
shutdown"). This wasn't handled by the codec, instead it would set the
FLL frequency to 0Hz which isn't working. Since we don't have any rate
constraints just ignore this request.

Fixes: 13409d27cb39 ("ASoC: wm8904: configure sysclk/FLL automatically")
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20191122232532.22258-1-michael@walle.cc
Signed-off-by: Mark Brown <broonie@kernel.org>
16 months agoASoC: rt5677: Fix build error without CONFIG_SPI
YueHaibing [Wed, 27 Nov 2019 08:21:45 +0000 (16:21 +0800)]
ASoC: rt5677: Fix build error without CONFIG_SPI

If CONFIG_SPI is n, SND_SOC_RT5677_SPI also is n, building fails:

sound/soc/codecs/rt5677.o: In function `rt5677_irq':
rt5677.c:(.text+0x2dbf): undefined reference to `rt5677_spi_hotword_detected'
sound/soc/codecs/rt5677.o: In function `rt5677_dsp_work':
rt5677.c:(.text+0x3709): undefined reference to `rt5677_spi_write'

This adds stub helpers to fix this.

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 461c623270e4 ("ASoC: rt5677: Load firmware via SPI using delayed work")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20191127082145.6100-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
16 months agoASoC: SOF: topology: Fix unload for SAI/ESAI
Daniel Baluta [Tue, 26 Nov 2019 14:16:06 +0000 (08:16 -0600)]
ASoC: SOF: topology: Fix unload for SAI/ESAI

Link unload now fails for ESAI/SAI DAIs with:

"error: invalid DAI type 6" because DAI type is not
properly handled.

Fix this by correctly handling cases where type is ESAI or SAI.

Fixes: a4eff5f86c9c5e7 ("ASoC: SOF: imx: Read ESAI parameters and send them to DSP")
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191126141606.21650-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
16 months agoASoC: SOF: Intel: BYT: fix a copy/paste mistake in byt_dump()
Keyon Jie [Tue, 26 Nov 2019 14:15:33 +0000 (08:15 -0600)]
ASoC: SOF: Intel: BYT: fix a copy/paste mistake in byt_dump()

The shim registers in BYT/CHT/BSW are 64bits based, correct the
copy/paste (from bdw.c where the shim registers are 32bits based) error
in byt_dump().

Fixes: 3a9e204d4e36 ("ASoC: SOF: Intel: Add context data to any IPC timeout")
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191126141533.21601-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
16 months agoASoC: AMD: Enable clk in startup intead of hw_params
Yu-Hsuan Hsu [Tue, 26 Nov 2019 07:54:24 +0000 (15:54 +0800)]
ASoC: AMD: Enable clk in startup intead of hw_params

Some usages only call startup and shutdown without setting hw_params
(e.g. arecord --dump-hw-params). If we don't enable clk in startup, it
will cause ref count error because the clk will be disabled in shutdown.
For this reason, we should move enabling clk from hw_params to startup.

In addition, the hw_params is fixed in this driver(48000 rate, 2
channels, S16_LE format) so we don't need to change the clk rate after
the hw_params is set.

Signed-off-by: Yu-Hsuan Hsu <yuhsuan@chromium.org>
Acked-by: Akshu Agrawal <akshu.agarawal@amd.com>
Link: https://lore.kernel.org/r/20191126075424.80668-1-yuhsuan@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
16 months agoALSA: aloop: Avoid pointer dereference before null-check
Andrew Gabbasov [Wed, 27 Nov 2019 11:06:22 +0000 (05:06 -0600)]
ALSA: aloop: Avoid pointer dereference before null-check

Static analysis tools (cppcheck and PVS Studio) report an error
in loopback_snd_timer_period_elapsed() regarding dpcm_play pointer
dereference earlier than its null-check. And although this is a result
of a formal check, and the pointer correctness is also protected
by having a corresponding bit set in the "running" mask, re-ordering
of the lines can imake the code even formally correct and eliminate
those static analysis error reports.

Fixes: 26c53379f98d ("ALSA: aloop: Support selection of snd_timer instead of jiffies")
Reported-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Link: https://lore.kernel.org/r/20191127110622.26105-1-andrew_gabbasov@mentor.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 months agoALSA: hda/hdmi - enable automatic runtime pm for AMD HDMI codecs by default
Alex Deucher [Fri, 22 Nov 2019 21:43:53 +0000 (16:43 -0500)]
ALSA: hda/hdmi - enable automatic runtime pm for AMD HDMI codecs by default

So that we can power down the GPU and audio to save power.

Reviewed-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20191122214353.582899-5-alexander.deucher@amd.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 months agoALSA: hda/hdmi - enable runtime pm for newer AMD display audio
Alex Deucher [Fri, 22 Nov 2019 21:43:52 +0000 (16:43 -0500)]
ALSA: hda/hdmi - enable runtime pm for newer AMD display audio

We are able to power down the GPU and audio via the GPU driver
so flag these asics as supporting runtime pm.

Reviewed-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20191122214353.582899-4-alexander.deucher@amd.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 months agoALSA: hda/hdmi - Add new pci ids for AMD GPU display audio
Alex Deucher [Fri, 22 Nov 2019 21:43:51 +0000 (16:43 -0500)]
ALSA: hda/hdmi - Add new pci ids for AMD GPU display audio

These are needed so we can enable runtime pm in a subsequent
patch.

Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20191122214353.582899-3-alexander.deucher@amd.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 months agoALSA: hda/hdmi - fix vgaswitcheroo detection for AMD
Alex Deucher [Fri, 22 Nov 2019 21:43:50 +0000 (16:43 -0500)]
ALSA: hda/hdmi - fix vgaswitcheroo detection for AMD

Only enable the vga_switcheroo logic on systems with the
ATPX ACPI method.  This logic is not needed for asics
that are not part of a PX (PowerXpress)/HG (Hybrid Graphics)
platform.

Reviewed-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20191122214353.582899-2-alexander.deucher@amd.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 months agoALSA: usb-audio: Fix Focusrite Scarlett 6i6 gen1 - input handling
Jens Verwiebe [Sun, 24 Nov 2019 12:35:44 +0000 (13:35 +0100)]
ALSA: usb-audio: Fix Focusrite Scarlett 6i6 gen1 - input handling

The Scarlett 6i6 has no padding on rear inputs 3/4 but a gainstage.
This patch introduces this functionality as to be seen in the mac
or windows scarlett control.

The correct address could already be found in the dump info, but was
never used. Without this patch inputs 3/4 are quite unusable else.

Signed-off-by: Jens Verwiebe <info@jensverwiebe.de>
Link: https://lore.kernel.org/r/384d65cd-5e87-91eb-9fc3-e57226f534c6@jensverwiebe.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 months agoALSA: hda/realtek - Enable internal speaker of ASUS UX431FLC
Jian-Hong Pan [Mon, 25 Nov 2019 09:34:06 +0000 (17:34 +0800)]
ALSA: hda/realtek - Enable internal speaker of ASUS UX431FLC

Laptops like ASUS UX431FLC and UX431FL can share the same audio quirks.
But UX431FLC needs one more step to enable the internal speaker: Pull
the GPIO from CODEC to initialize the AMP.

Fixes: 60083f9e94b2 ("ALSA: hda/realtek - Enable internal speaker & headset mic of ASUS UX431FL")
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191125093405.5702-1-jian-hong@endlessm.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 months agoASoC: rt5682: fix i2c arbitration lost issue
Shuming Fan [Mon, 25 Nov 2019 09:19:40 +0000 (17:19 +0800)]
ASoC: rt5682: fix i2c arbitration lost issue

This patch modified the HW initial setting to fix i2c arbitration lost issue.

Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20191125091940.11953-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
16 months agoMerge tag 'asoc-v5.5-2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie...
Takashi Iwai [Mon, 25 Nov 2019 13:27:33 +0000 (14:27 +0100)]
Merge tag 'asoc-v5.5-2' of https://git./linux/kernel/git/broonie/sound into for-linus

ASoC: More updates for v5.5

Some more development work for v5.5.  Highlights include:

 - More cleanups from Morimoto-san.
 - Trigger word detection for RT5677.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 months agoALSA: aloop: Fix dependency on timer API
Takashi Iwai [Sun, 24 Nov 2019 08:39:24 +0000 (09:39 +0100)]
ALSA: aloop: Fix dependency on timer API

An explicit Kconfig dependency is missing for the recent addition of
the timer support.  CONFIG_SND_TIMER isn't always selected by SND_PCM.

Fixes: 26c53379f98d ("ALSA: aloop: Support selection of snd_timer instead of jiffies")
Reported-by: kbuild test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20191124083924.14049-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 months agoMerge branch 'asoc-5.5' into asoc-next
Mark Brown [Fri, 22 Nov 2019 19:56:02 +0000 (19:56 +0000)]
Merge branch 'asoc-5.5' into asoc-next

16 months agoMerge branch 'asoc-5.4' into asoc-linus
Mark Brown [Fri, 22 Nov 2019 19:55:59 +0000 (19:55 +0000)]
Merge branch 'asoc-5.4' into asoc-linus

16 months agoASoC: DMI long name - avoid to add board name if matches with product name
Jaroslav Kysela [Wed, 20 Nov 2019 17:44:35 +0000 (18:44 +0100)]
ASoC: DMI long name - avoid to add board name if matches with product name

Current code:

  LENOVO-20QE000VMC-ThinkPadX1Carbon7th-20QE000VMC

With the patch:

  LENOVO-20QE000VMC-ThinkPadX1Carbon7th

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20191120174435.30920-2-perex@perex.cz
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
16 months agoASoC: improve the DMI long card code in asoc-core
Jaroslav Kysela [Wed, 20 Nov 2019 17:44:34 +0000 (18:44 +0100)]
ASoC: improve the DMI long card code in asoc-core

Add append_dmi_string() function and make the code more readable.

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191120174435.30920-1-perex@perex.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
16 months agoASoC: rsnd: fix DALIGN register for SSIU
Nilkanth Ahirrao [Thu, 21 Nov 2019 11:10:23 +0000 (12:10 +0100)]
ASoC: rsnd: fix DALIGN register for SSIU

The current driver only sets 0x76543210 and 0x67452301 for DALIGN.
This doesn’t work well for TDM split and ex-split mode for all SSIU.
This patch programs the DALIGN registers based on the SSIU number.

Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Jiada Wang <jiada_wang@mentor.com>
Cc: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Fixes: a914e44693d41b ("ASoC: rsnd: more clear rsnd_get_dalign() for DALIGN")
Signed-off-by: Nilkanth Ahirrao <anilkanth@jp.adit-jv.com>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20191121111023.10976-1-erosca@de.adit-jv.com
Signed-off-by: Mark Brown <broonie@kernel.org>
16 months agoALSA: aloop: Avoid unexpected timer event callback tasklets
Andrew Gabbasov [Fri, 22 Nov 2019 17:52:18 +0000 (11:52 -0600)]
ALSA: aloop: Avoid unexpected timer event callback tasklets

loopback_snd_timer_close_cable() function waits until all
scheduled tasklets are completed, but the timer is closed after that
and can generate more event callbacks, scheduling new tasklets,
that will not be synchronized with cable closing.
Move tasklet_kill() call to be executed after snd_timer_close()
call to avoid such case.

Fixes: 26c53379f98d ("ALSA: aloop: Support selection of snd_timer instead of jiffies")
Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Link: https://lore.kernel.org/r/20191122175218.17187-2-andrew_gabbasov@mentor.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 months agoALSA: aloop: Remove redundant locking in timer open function
Andrew Gabbasov [Fri, 22 Nov 2019 17:52:17 +0000 (11:52 -0600)]
ALSA: aloop: Remove redundant locking in timer open function

loopback_parse_timer_id() uses snd_card_ref(), that can lock on mutex,
also snd_timer_instance_new() uses non-atomic allocation, that can sleep.
So, both functions can not be called from loopback_snd_timer_open()
with cable->lock spinlock locked.

Moreover, most part of loopback_snd_timer_open() function body works
when the opposite stream of the same cable does not yet exist, and
the current stream is not yet completely open and can't be running,
so existing locking of loopback->cable_lock mutex is enough to protect
from conflicts with simultaneous opening or closing.
Locking of cable->lock spinlock is not needed in this case.

Fixes: 26c53379f98d ("ALSA: aloop: Support selection of snd_timer instead of jiffies")
Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Link: https://lore.kernel.org/r/20191122175218.17187-1-andrew_gabbasov@mentor.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 months agoASoC: component: Add sync_stop PCM ops
Takashi Iwai [Thu, 21 Nov 2019 19:07:09 +0000 (20:07 +0100)]
ASoC: component: Add sync_stop PCM ops

Add the support of the new PCM sync_stop ops in ASoC component.
It's optional and can be NULL unless you need the sync operation.

Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20191121190709.29121-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 months agoASoC: pcm: Make ioctl ops optional
Takashi Iwai [Thu, 21 Nov 2019 19:07:08 +0000 (20:07 +0100)]
ASoC: pcm: Make ioctl ops optional

Now PCM core accepts the NULL ioctl ops as default, and passing a proper
ioctl ops is no longer mandatory.  Adjust soc_new_pcm() to allow also
the NULL for component ioctl ops, too.

Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20191121190709.29121-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 months agoALSA: hda/hdmi - Clear codec->relaxed_resume flag at unbinding
Takashi Iwai [Fri, 22 Nov 2019 13:26:24 +0000 (14:26 +0100)]
ALSA: hda/hdmi - Clear codec->relaxed_resume flag at unbinding

The HDMI codec may leave codec->relaxed_resume flag set even after
unbinding.  Clear it unconditionally.

It's very unlikely that this actually matters in the real use case,
so just a fix for consistency.

Fixes: ade49db337a9 ("ALSA: hda/hdmi - Allow audio component for AMD/ATI and Nvidia HDMI")
Link: https://lore.kernel.org/r/20191122132624.5482-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 months agoALSA: hda - Disable audio component for legacy Nvidia HDMI codecs
Takashi Iwai [Fri, 22 Nov 2019 13:20:00 +0000 (14:20 +0100)]
ALSA: hda - Disable audio component for legacy Nvidia HDMI codecs

The old Nvidia chips have multiple HD-audio codecs on the same
HD-audio controller, and this doesn't work as expected with the current
audio component binding that is implemented under the one-codec-per-
controller assumption; at the probe time, the driver leads to several
kernel WARNING messages.

For the proper support, we may change the pin2port and port2pin to
traverse the codec list per the given pin number, but this needs more
development and testing.

As a quick workaround, instead, this patch drops the binding in the
audio side for these legacy chips since the audio component support in
nouveau graphics driver is still not merged (hence it's basically
unused).

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205625
Fixes: ade49db337a9 ("ALSA: hda/hdmi - Allow audio component for AMD/ATI and Nvidia HDMI")
Link: https://lore.kernel.org/r/20191122132000.4460-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 months agoALSA: cs4236: fix error return comparison of an unsigned integer
Colin Ian King [Fri, 22 Nov 2019 13:13:54 +0000 (13:13 +0000)]
ALSA: cs4236: fix error return comparison of an unsigned integer

The return from pnp_irq is an unsigned integer type resource_size_t
and hence the error check for a positive non-error code is always
going to be true.  A check for a non-failure return from pnp_irq
should in fact be for (resource_size_t)-1 rather than >= 0.

Addresses-Coverity: ("Unsigned compared against 0")
Fixes: a9824c868a2c ("[ALSA] Add CS4232 PnP BIOS support")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20191122131354.58042-1-colin.king@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 months agoALSA: usb-audio: Fix NULL dereference at parsing BADD
Takashi Iwai [Fri, 22 Nov 2019 11:28:40 +0000 (12:28 +0100)]
ALSA: usb-audio: Fix NULL dereference at parsing BADD

snd_usb_mixer_controls_badd() that parses UAC3 BADD profiles misses a
NULL check for the given interfaces.  When a malformed USB descriptor
is passed, this may lead to an Oops, as spotted by syzkaller.
Skip the iteration if the interface doesn't exist for avoiding the
crash.

Fixes: 17156f23e93c ("ALSA: usb: add UAC3 BADD profiles support")
Reported-by: syzbot+a36ab65c6653d7ccdd62@syzkaller.appspotmail.com
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191122112840.24797-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 months agoALSA: usb-audio: Fix Scarlett 6i6 Gen 2 port data
Geoffrey D. Bennett [Sun, 10 Nov 2019 13:43:56 +0000 (00:13 +1030)]
ALSA: usb-audio: Fix Scarlett 6i6 Gen 2 port data

The s6i6_gen2_info.ports[] array had the Mixer and PCM port type
entries in the wrong place. Use designators to explicitly specify the
array elements being set.

Fixes: 9e4d5c1be21f ("ALSA: usb-audio: Scarlett Gen 2 mixer interface")
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Tested-by: Alex Fellows <alex.fellows@gmail.com>
Tested-by: Markus Schroetter <project.m.schroetter@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191110134356.GA31589@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 months agoALSA: hda/realtek - Enable the headset-mic on a Xiaomi's laptop
Hui Wang [Thu, 21 Nov 2019 02:54:27 +0000 (10:54 +0800)]
ALSA: hda/realtek - Enable the headset-mic on a Xiaomi's laptop

The headset on this machine is not defined, after applying the quirk
ALC256_FIXUP_ASUS_HEADSET_MIC, the headset-mic works well

BugLink: https://bugs.launchpad.net/bugs/1846148
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20191121025427.8856-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 months agoALSA: hda/realtek - Move some alc236 pintbls to fallback table
Hui Wang [Thu, 21 Nov 2019 02:26:44 +0000 (10:26 +0800)]
ALSA: hda/realtek - Move some alc236 pintbls to fallback table

We have a new Dell machine which needs to apply the quirk
ALC255_FIXUP_DELL1_MIC_NO_PRESENCE, try to use the fallback table
to fix it this time. And we could remove all pintbls of alc236
for applying DELL1_MIC_NO_PRESENCE on Dell machines.

Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20191121022644.8078-2-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 months agoALSA: hda/realtek - Move some alc256 pintbls to fallback table
Hui Wang [Thu, 21 Nov 2019 02:26:43 +0000 (10:26 +0800)]
ALSA: hda/realtek - Move some alc256 pintbls to fallback table

We have a new Dell machine which needs to apply the quirk
ALC255_FIXUP_DELL1_MIC_NO_PRESENCE, try to use the fallback table
to fix it this time. And we could remove all pintbls of alc256
for applying DELL1_MIC_NO_PRESENCE on Dell machines.

Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20191121022644.8078-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 months agoALSA: docs: Update about the new PCM sync_stop ops
Takashi Iwai [Sun, 17 Nov 2019 08:53:08 +0000 (09:53 +0100)]
ALSA: docs: Update about the new PCM sync_stop ops

Add the documentation about the new PCM sync_stop ops and
card->sync_irq field.

Link: https://lore.kernel.org/r/20191117085308.23915-9-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 months agoALSA: pcm: Add card sync_irq field
Takashi Iwai [Sun, 17 Nov 2019 08:53:07 +0000 (09:53 +0100)]
ALSA: pcm: Add card sync_irq field

Many PCI and other drivers performs snd_pcm_period_elapsed() simply in
its interrupt handler, so the sync_stop operation is just to call
synchronize_irq().  Instead of putting this call multiple times,
introduce the common card->sync_irq field.  When this field is set,
PCM core performs synchronize_irq() for sync-stop operation.  Each
driver just needs to copy its local IRQ number to card->sync_irq, and
that's all we need.

Link: https://lore.kernel.org/r/20191117085308.23915-8-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 months agoALSA: pcm: Add the support for sync-stop operation
Takashi Iwai [Sun, 17 Nov 2019 08:53:06 +0000 (09:53 +0100)]
ALSA: pcm: Add the support for sync-stop operation

The standard programming model of a PCM sound driver is to process
snd_pcm_period_elapsed() from an interrupt handler.  When a running
stream is stopped, PCM core calls the trigger-STOP PCM ops, sets the
stream state to SETUP, and moves on to the next step.  This is
performed in an atomic manner -- this could be called from the interrupt
context, after all.

The problem is that, if the stream goes further and reaches to the
CLOSE state immediately, the stream might be still being processed in
snd_pcm_period_elapsed() in the interrupt context, and hits a NULL
dereference.  Such a crash happens because of the atomic operation,
and we can't wait until the stream-stop finishes.

For addressing such a problem, this commit adds a new PCM ops,
sync_stop.  This gets called at the appropriate places that need a
sync with the stream-stop, i.e. at hw_params, prepare and hw_free.

Some drivers already have a similar mechanism implemented locally, and
we'll refactor the code later.

Link: https://lore.kernel.org/r/20191117085308.23915-7-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 months agoALSA: pcm: Move PCM_RUNTIME_CHECK() macro into local header
Takashi Iwai [Sun, 17 Nov 2019 10:05:12 +0000 (11:05 +0100)]
ALSA: pcm: Move PCM_RUNTIME_CHECK() macro into local header

It should be used only in the PCM core code locally.

Link: https://lore.kernel.org/r/20191117085308.23915-6-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 months agoALSA: docs: Update document about the default PCM ioctl ops
Takashi Iwai [Sun, 17 Nov 2019 08:53:04 +0000 (09:53 +0100)]
ALSA: docs: Update document about the default PCM ioctl ops

Mention that it's completely optional now.

Link: https://lore.kernel.org/r/20191117085308.23915-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 months agoALSA: pcm: Allow NULL ioctl ops
Takashi Iwai [Sun, 17 Nov 2019 08:53:03 +0000 (09:53 +0100)]
ALSA: pcm: Allow NULL ioctl ops

Currently PCM ioctl ops is a mandatory field but almost all drivers
simply pass snd_pcm_lib_ioctl.  For simplicity, allow to set NULL in
the field and call snd_pcm_lib_ioctl() as default.

Link: https://lore.kernel.org/r/20191117085308.23915-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 months agoALSA: docs: Update for managed buffer allocation mode
Takashi Iwai [Sun, 17 Nov 2019 08:53:02 +0000 (09:53 +0100)]
ALSA: docs: Update for managed buffer allocation mode

Update the documentation for the newly introduced managed buffer
allocation mode accordingly.  The old preallocation is no longer
recommended.

Link: https://lore.kernel.org/r/20191117085308.23915-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 months agoALSA: pcm: Introduce managed buffer allocation mode
Takashi Iwai [Sun, 17 Nov 2019 08:53:01 +0000 (09:53 +0100)]
ALSA: pcm: Introduce managed buffer allocation mode

This patch adds the support for the feature to automatically allocate
and free PCM buffers, so called "managed buffer allocation" mode.
It's set up via new PCM helpers, snd_pcm_set_managed_buffer() and
snd_pcm_set_managed_buffer_all(), both of which correspond to the
existing preallocator helpers, snd_pcm_lib_preallocate_pages() and
snd_pcm_lib_preallocate_pages_for_all().  When the new helper is used,
it not only performs the pre-allocation of buffers, but also it
manages to call snd_pcm_lib_malloc_pages() before the PCM hw_params
ops and snd_lib_pcm_free() after the PCM hw_free ops inside PCM core,
respectively.  This allows drivers to drop the explicit calls of the
memory allocation / release functions, and it will be a good amount of
code reduction in the end of this patch series.

When the PCM substream is set to the managed buffer allocation mode,
the managed_buffer_alloc flag is set in the substream object.  Since
some drivers want to know when a buffer is newly allocated or
re-allocated at hw_params callback (e.g. want to set up the additional
stuff for the given buffer only at allocation time), now PCM core
turns on buffer_changed flag when the buffer has changed.

The standard conversions to use the new API will be straightforward:
- Replace snd_pcm_lib_preallocate*() calls with the corresponding
  snd_pcm_set_managed_buffer*(); the arguments should be unchanged
- Drop superfluous snd_pcm_lib_malloc() and snd_pcm_lib_free() calls;
  the check of snd_pcm_lib_malloc() returns should be replaced with
  the check of runtime->buffer_changed flag.
- If hw_params or hw_free becomes empty, drop them from PCM ops

Link: https://lore.kernel.org/r/20191117085308.23915-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 months agoALSA: aloop: Support runtime change of snd_timer via info interface
Andrew Gabbasov [Wed, 20 Nov 2019 17:49:55 +0000 (11:49 -0600)]
ALSA: aloop: Support runtime change of snd_timer via info interface

Show and change sound card timer source with read-write info
file in proc filesystem. Initial string can still be set as
module parameter.

The timer source string value can be changed at any time,
but it is latched by PCM substream open callback (the first one
for a particular cable). At this point it is actually used, that
is the string is parsed, and the timer is looked up and opened.

The timer source is set for a loopback card (the same as initial
setting by module parameter), but every cable uses the value,
current at the moment of open.

Setting the value to empty string switches the timer to jiffies.

Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Link: https://lore.kernel.org/r/20191120174955.6410-8-andrew_gabbasov@mentor.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 months agoALSA: aloop: Support selection of snd_timer instead of jiffies
Timo Wischer [Wed, 20 Nov 2019 17:49:54 +0000 (11:49 -0600)]
ALSA: aloop: Support selection of snd_timer instead of jiffies

to do synchronous audio forwarding between hardware sound card and aloop
devices. Such an audio route could look like the following:
Sound card -> Loopback application -> ALSA loop device -> arecord

In this case the loopback device should use the sound timer of the sound
card. Without this patch the loopback application has to implement an
adaptive sample rate converter to align the different clocks of the
different ALSA devices.

The used timer can be selected by referring to a sound card, its device
and subdevice, when loading the module:
  $ modprobe snd_aloop enable=1 timer_source=[<card>[.<dev>[.<subdev>]]]
<card> is the name (id) of the sound card or a card number.
<dev> and <subdev> are device and subdevice numbers (defaults are 0).
Empty string as a value of timer_source= parameter enables previous
functionality (using jiffies timer).

Signed-off-by: Timo Wischer <twischer@de.adit-jv.com>
Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Link: https://lore.kernel.org/r/20191120174955.6410-7-andrew_gabbasov@mentor.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 months agoALSA: aloop: Move CABLE_VALID_BOTH to the top of file
Timo Wischer [Wed, 20 Nov 2019 17:49:53 +0000 (11:49 -0600)]
ALSA: aloop: Move CABLE_VALID_BOTH to the top of file

so all functions can use the same.

Signed-off-by: Timo Wischer <twischer@de.adit-jv.com>
Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Link: https://lore.kernel.org/r/20191120174955.6410-6-andrew_gabbasov@mentor.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 months agoALSA: aloop: Rename all jiffies timer specific functions
Timo Wischer [Wed, 20 Nov 2019 17:49:52 +0000 (11:49 -0600)]
ALSA: aloop: Rename all jiffies timer specific functions

This commit does not change the behaviour. It only separates the jiffies
timer specific implementation from the generic part.

Signed-off-by: Timo Wischer <twischer@de.adit-jv.com>
Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Link: https://lore.kernel.org/r/20191120174955.6410-5-andrew_gabbasov@mentor.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 months agoALSA: aloop: Use callback functions for timer specific implementations
Timo Wischer [Wed, 20 Nov 2019 17:49:51 +0000 (11:49 -0600)]
ALSA: aloop: Use callback functions for timer specific implementations

This commit only refactors the implementation. It does not change the
behaviour.
It is required to support other timers (e.g sound timer).

Signed-off-by: Timo Wischer <twischer@de.adit-jv.com>
Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Link: https://lore.kernel.org/r/20191120174955.6410-4-andrew_gabbasov@mentor.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 months agoALSA: aloop: Support return of error code for timer start and stop
Timo Wischer [Wed, 20 Nov 2019 17:49:50 +0000 (11:49 -0600)]
ALSA: aloop: Support return of error code for timer start and stop

This is required for additional timer implementations which could detect
errors and want to throw them.

Signed-off-by: Timo Wischer <twischer@de.adit-jv.com>
Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Link: https://lore.kernel.org/r/20191120174955.6410-3-andrew_gabbasov@mentor.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 months agoALSA: aloop: Describe units of variables
Timo Wischer [Wed, 20 Nov 2019 17:49:49 +0000 (11:49 -0600)]
ALSA: aloop: Describe units of variables

Describe the unit of the variables used to calculate the hw pointer
depending on jiffies ticks.

Signed-off-by: Timo Wischer <twischer@de.adit-jv.com>
Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
Link: https://lore.kernel.org/r/20191120174955.6410-2-andrew_gabbasov@mentor.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
16 months agoASoC: Fix Kconfig indentation
Krzysztof Kozlowski [Wed, 20 Nov 2019 13:32:52 +0000 (21:32 +0800)]
ASoC: Fix Kconfig indentation

Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^        /\t/' -i */Kconfig

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191120133252.6365-1-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
16 months agoASoC: soc-pcm: check symmetry before hw_params
Shengjiu Wang [Tue, 12 Nov 2019 10:46:42 +0000 (18:46 +0800)]
ASoC: soc-pcm: check symmetry before hw_params

This reverts commit 957ce0c6b8a1f (ASoC: soc-pcm: check symmetry after
hw_params).

That commit cause soc_pcm_params_symmetry can't take effect.
cpu_dai->rate, cpu_dai->channels and cpu_dai->sample_bits
are updated in the middle of soc_pcm_hw_params, so move
soc_pcm_params_symmetry to the end of soc_pcm_hw_params is
not a good solution, for judgement of symmetry in the function
is always true.

FIXME:
According to the comments of that commit, I think the case
described in the commit should disable symmetric_rates
in Back-End, rather than changing the position of
soc_pcm_params_symmetry.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1573555602-5403-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
16 months agoASoC: pcm3168a: Update the RST gpio handling to align with documentation
Peter Ujfalusi [Wed, 20 Nov 2019 13:17:53 +0000 (15:17 +0200)]
ASoC: pcm3168a: Update the RST gpio handling to align with documentation

The RST (reset-gpios) is low active so the driver must handle it
accordingly.

Add comments to explain clearly how the line is used.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20191120131753.6831-3-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
16 months agoASoC: dt-bindings: pcm3168a: Update the optional RST gpio for clarity
Peter Ujfalusi [Wed, 20 Nov 2019 13:17:52 +0000 (15:17 +0200)]
ASoC: dt-bindings: pcm3168a: Update the optional RST gpio for clarity

Use the standard name for the gpion in DT: reset-gpios

Document that the RST line is low active and update the example
accordingly.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20191120131753.6831-2-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
16 months agoASoC: core: add SND_SOC_BYTES_E
Tzung-Bi Shih [Wed, 20 Nov 2019 06:08:43 +0000 (14:08 +0800)]
ASoC: core: add SND_SOC_BYTES_E

Add SND_SOC_BYTES_E to accept getter and putter.

Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20191120060844.224607-2-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
16 months agoASoC: add control components management
Jaroslav Kysela [Tue, 19 Nov 2019 17:49:32 +0000 (18:49 +0100)]
ASoC: add control components management

This ASCII string can carry additional information about
soundcard components or configuration. Add the possibility
to set this string via the ASoC card.

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20191119174933.25526-1-perex@perex.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
16 months agoALSA: hda - Add mute led support for HP ProBook 645 G4
Kai-Heng Feng [Wed, 20 Nov 2019 08:20:35 +0000 (16:20 +0800)]
ALSA: hda - Add mute led support for HP ProBook 645 G4

Mic mute led does not work on HP ProBook 645 G4.
We can use CXT_FIXUP_MUTE_LED_GPIO fixup to support it.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191120082035.18937-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
17 months agoASoC: soc-pcm: remove soc_pcm_private_free()
Kuninori Morimoto [Mon, 18 Nov 2019 01:51:11 +0000 (10:51 +0900)]
ASoC: soc-pcm: remove soc_pcm_private_free()

soc-topology adds extra dai_link by using snd_soc_add_dai_link(),
and removes it by snd_soc_romove_dai_link().

This snd_soc_add/remove_dai_link() and/or its related
functions are unbalanced before, and now, these are balance-uped.
But, it finds the random operation issue, and it is reported by
Pierre-Louis.

When card was released, topology will call snd_soc_remove_dai_link()
via (A).

static void soc_cleanup_card_resources(struct snd_soc_card *card)
{
struct snd_soc_dai_link *link, *_link;

/* This should be called before snd_card_free() */
(A) soc_remove_link_components(card);

/* free the ALSA card at first; this syncs with pending operations */
if (card->snd_card) {
(B) snd_card_free(card->snd_card);
card->snd_card = NULL;
}

/* remove and free each DAI */
(X) soc_remove_link_dais(card);

for_each_card_links_safe(card, link, _link)
(C) snd_soc_remove_dai_link(card, link);

...
}

At (A), topology calls snd_soc_remove_dai_link().
Then topology rtd, and its related all data are freed.

Next, (B) is called, and then, pcm->private_free = soc_pcm_private_free()
is called.

static void soc_pcm_private_free(struct snd_pcm *pcm)
{
struct snd_soc_pcm_runtime *rtd = pcm->private_data;

/* need to sync the delayed work before releasing resources */
flush_delayed_work(&rtd->delayed_work);
snd_soc_pcm_component_free(rtd);
}

Here, it gets rtd via pcm->private_data.
But, topology related rtd are already freed at (A).
Normal sound card has no damage, becase it frees rtd at (C).

These are finalizing rtd related data.
Thus, these should be called when rtd was freed, not sound card
was freed. It is very natural and understandable.

In other words, pcm->private_free = soc_pcm_private_free()
is no longer needed.

Extra issue is that there is zero chance to call
soc_remove_dai() for topology related dai at (X).
Because (A) removes rtd connection from card too, and,
(X) is based on card connected rtd.

This means, (X) need to be called before (C) (= for normal sound)
and (A) (= for topology).

Now, I want to focus this patch which is the reason why
snd_card_free() = (B) is located there.

commit 4efda5f2130da033aeedc5b3205569893b910de2
("ASoC: Fix use-after-free at card unregistration")

Original snd_card_free() was called last of this function.
But moved to top to avoid use-after-free issue.
The issue was happen at soc_pcm_free() which was pcm->private_free,
today it is updated/renamed to soc_pcm_private_free().

In other words, (B) need to be called before (C) (= for normal sound)
and (A) (= for topology), because it needs (not yet freed) rtd.
But, (A) need to be called before (B),
because it needs card->snd_card pointer.

If we call flush_delayed_work() and snd_soc_pcm_component_free()
(= same as soc_pcm_private_free()) when rtd was freed (= (C), (A)),
there is no reason to call snd_card_free() at top of this function.
It can be called end of this function, again.

But, in such case, it will likely break unbind again, as Takashi-san
reported. When unbind is performed in a busy state, the code may
release still-in-use resources.
At least we need to call snd_card_disconnect_sync() at the first place.

The final code will be...

static void soc_cleanup_card_resources(struct snd_soc_card *card)
{
struct snd_soc_dai_link *link, *_link;

if (card->snd_card)
(Z) snd_card_disconnect_sync(card->snd_card);

(X) soc_remove_link_dais(card);
(A) soc_remove_link_components(card);

for_each_card_links_safe(card, link, _link)
(C) snd_soc_remove_dai_link(card, link);

...
if (card->snd_card) {
(B) snd_card_free(card->snd_card);
card->snd_card = NULL;
}
}

To avoid release still-in-use resources,
call snd_card_disconnect_sync() at (Z).

(X) is needed for both non-topology and topology.

    topology removes rtd via (A), and
non topology removes rtd via (C).

snd_card_free() is no longer related to use-after-free issue.
Thus, locating (B) is no problem.

Fixes: df95a16d2a9626 ("ASoC: soc-core: fix RIP warning on card removal")
Fixes: bc7a9091e5b927 ("ASoC: soc-core: add soc_unbind_dai_link()")
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/87o8xax88g.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>