muen/linux.git
8 months agoMerge tag 'warning-fixes-20211005' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Tue, 5 Oct 2021 17:52:53 +0000 (10:52 -0700)]
Merge tag 'warning-fixes-20211005' of git://git./linux/kernel/git/dhowells/linux-fs

Pull misc fs warning fixes from David Howells:
 "The first four patches fix kerneldoc warnings in fscache, afs, 9p and
  nfs - they're mostly just comment changes, though there's one place in
  9p where a comment got detached from the function it was attached to
  (v9fs_fid_add) and has to switch places with a function that got
  inserted between (__add_fid).

  The patch on the end removes an unused symbol in fscache"

* tag 'warning-fixes-20211005' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  fscache: Remove an unused static variable
  fscache: Fix some kerneldoc warnings shown up by W=1
  9p: Fix a bunch of kerneldoc warnings shown up by W=1
  afs: Fix kerneldoc warning shown up by W=1
  nfs: Fix kerneldoc warning shown up by W=1

9 months agoMerge tag 'linux-kselftest-fixes-5.15-rc5' of git://git.kernel.org/pub/scm/linux...
Linus Torvalds [Mon, 4 Oct 2021 21:33:30 +0000 (14:33 -0700)]
Merge tag 'linux-kselftest-fixes-5.15-rc5' of git://git./linux/kernel/git/shuah/linux-kselftest

Pull Kselftest fixes from Shuah Khan:
 "A fix to implicit declaration warns in drivers/dma-buf test"

* tag 'linux-kselftest-fixes-5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests: drivers/dma-buf: Fix implicit declaration warns

9 months agofscache: Remove an unused static variable
David Howells [Mon, 20 Sep 2021 09:33:55 +0000 (10:33 +0100)]
fscache: Remove an unused static variable

The fscache object CREATE_OBJECT work state isn't ever referred to, so
remove it and avoid the unused variable warning caused by W=1.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-fsdevel@vger.kernel.org
cc: linux-doc@vger.kernel.org
Link: https://lore.kernel.org/r/163214005516.2945267.7000234432243167892.stgit@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/163281899704.2790286.9177774252843775348.stgit@warthog.procyon.org.uk/
9 months agofscache: Fix some kerneldoc warnings shown up by W=1
David Howells [Mon, 4 Oct 2021 21:08:50 +0000 (22:08 +0100)]
fscache: Fix some kerneldoc warnings shown up by W=1

Fix some kerneldoc warnings in the fscache driver that are shown up by W=1.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Mauro Carvalho Chehab <mchehab@kernel.org>
cc: linux-fsdevel@vger.kernel.org
cc: linux-doc@vger.kernel.org
Link: https://lore.kernel.org/r/163214005516.2945267.7000234432243167892.stgit@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/163281899704.2790286.9177774252843775348.stgit@warthog.procyon.org.uk/
9 months ago9p: Fix a bunch of kerneldoc warnings shown up by W=1
David Howells [Mon, 4 Oct 2021 21:07:22 +0000 (22:07 +0100)]
9p: Fix a bunch of kerneldoc warnings shown up by W=1

Fix a bunch of kerneldoc warnings shown up by W=1 in the 9p filesystem:

 (1) Add/remove/fix kerneldoc parameters descriptions.

 (2) Move __add_fid() from between v9fs_fid_add() and its comment.

 (3) 9p's caches_show() doesn't really make sense as an API function, so
     remove the kerneldoc annotation.  It's also not prefixed with 'v9fs_'.
     Also remove the kerneldoc markers from the 9p fscache wrappers.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Dominique Martinet <asmadeus@codewreck.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Mauro Carvalho Chehab <mchehab@kernel.org>
cc: v9fs-developer@lists.sourceforge.net
cc: linux-fsdevel@vger.kernel.org
cc: linux-doc@vger.kernel.org
Link: https://lore.kernel.org/r/163214005516.2945267.7000234432243167892.stgit@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/163281899704.2790286.9177774252843775348.stgit@warthog.procyon.org.uk/
9 months agoafs: Fix kerneldoc warning shown up by W=1
David Howells [Mon, 4 Oct 2021 21:04:33 +0000 (22:04 +0100)]
afs: Fix kerneldoc warning shown up by W=1

Fix a kerneldoc warning in afs due to a partially documented internal
function by removing the kerneldoc marker.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-doc@vger.kernel.org
Link: https://lore.kernel.org/r/163214005516.2945267.7000234432243167892.stgit@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/163281899704.2790286.9177774252843775348.stgit@warthog.procyon.org.uk/
9 months agonfs: Fix kerneldoc warning shown up by W=1
David Howells [Mon, 4 Oct 2021 21:02:01 +0000 (22:02 +0100)]
nfs: Fix kerneldoc warning shown up by W=1

Fix a kerneldoc warning in nfs due to documentation for a parameter that
isn't present.

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Trond Myklebust <trond.myklebust@hammerspace.com>
cc: Anna Schumaker <anna.schumaker@netapp.com>
cc: Mauro Carvalho Chehab <mchehab@kernel.org>
cc: linux-nfs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
cc: linux-doc@vger.kernel.org
Link: https://lore.kernel.org/r/163214005516.2945267.7000234432243167892.stgit@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/163281899704.2790286.9177774252843775348.stgit@warthog.procyon.org.uk/
9 months agoMerge tag 'media/v5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab...
Linus Torvalds [Mon, 4 Oct 2021 16:53:40 +0000 (09:53 -0700)]
Merge tag 'media/v5.15-3' of git://git./linux/kernel/git/mchehab/linux-media

Pull media fix from Mauro Carvalho Chehab:
 "There's just one patch here, fixing a -Werror issue at
  staging/atomisp"

* tag 'media/v5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: atomisp: restore missing 'return' statement

9 months agoMerge tag 'ovl-fixes-5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mszer...
Linus Torvalds [Mon, 4 Oct 2021 16:46:36 +0000 (09:46 -0700)]
Merge tag 'ovl-fixes-5.15-rc5' of git://git./linux/kernel/git/mszeredi/vfs

Pull overlayfs fixes from Miklos Szeredi:
 "Fix two bugs, both of them corner cases not affecting most users"

* tag 'ovl-fixes-5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
  ovl: fix IOCB_DIRECT if underlying fs doesn't support direct IO
  ovl: fix missing negative dentry check in ovl_rename()

9 months agoMerge tag 'mips-fixes_5.15_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips...
Linus Torvalds [Mon, 4 Oct 2021 16:38:55 +0000 (09:38 -0700)]
Merge tag 'mips-fixes_5.15_1' of git://git./linux/kernel/git/mips/linux

Pull MIPS fix from Thomas Bogendoerfer:
 "Revert workaround for buggy cpu detection because regressions"

* tag 'mips-fixes_5.15_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: Revert "add support for buggy MT7621S core detection"

9 months agomedia: atomisp: restore missing 'return' statement
Arnd Bergmann [Mon, 2 Aug 2021 14:38:14 +0000 (16:38 +0200)]
media: atomisp: restore missing 'return' statement

The input_system_configure_channel_sensor() function lost its final
return code in a previous patch:

drivers/staging/media/atomisp/pci/hive_isp_css_common/host/input_system.c: In function 'input_system_configure_channel_sensor':
drivers/staging/media/atomisp/pci/hive_isp_css_common/host/input_system.c:1649:1: error: control reaches end of non-void function [-Werror=return-type]

Restore what was there originally.

Link: https://lore.kernel.org/linux-media/20210802143820.1150099-1-arnd@kernel.org
Fixes: 728a5c64ae5f ("media: atomisp: remove dublicate code")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
9 months agoLinux 5.15-rc4 v5.15-rc4
Linus Torvalds [Sun, 3 Oct 2021 21:08:47 +0000 (14:08 -0700)]
Linux 5.15-rc4

9 months agoelf: don't use MAP_FIXED_NOREPLACE for elf interpreter mappings
Chen Jingwen [Tue, 28 Sep 2021 12:56:57 +0000 (20:56 +0800)]
elf: don't use MAP_FIXED_NOREPLACE for elf interpreter mappings

In commit b212921b13bd ("elf: don't use MAP_FIXED_NOREPLACE for elf
executable mappings") we still leave MAP_FIXED_NOREPLACE in place for
load_elf_interp.

Unfortunately, this will cause kernel to fail to start with:

    1 (init): Uhuuh, elf segment at 00003ffff7ffd000 requested but the memory is mapped already
    Failed to execute /init (error -17)

The reason is that the elf interpreter (ld.so) has overlapping segments.

  readelf -l ld-2.31.so
  Program Headers:
    Type           Offset             VirtAddr           PhysAddr
                   FileSiz            MemSiz              Flags  Align
    LOAD           0x0000000000000000 0x0000000000000000 0x0000000000000000
                   0x000000000002c94c 0x000000000002c94c  R E    0x10000
    LOAD           0x000000000002dae0 0x000000000003dae0 0x000000000003dae0
                   0x00000000000021e8 0x0000000000002320  RW     0x10000
    LOAD           0x000000000002fe00 0x000000000003fe00 0x000000000003fe00
                   0x00000000000011ac 0x0000000000001328  RW     0x10000

The reason for this problem is the same as described in commit
ad55eac74f20 ("elf: enforce MAP_FIXED on overlaying elf segments").

Not only executable binaries, elf interpreters (e.g. ld.so) can have
overlapping elf segments, so we better drop MAP_FIXED_NOREPLACE and go
back to MAP_FIXED in load_elf_interp.

Fixes: 4ed28639519c ("fs, elf: drop MAP_FIXED usage from elf_map")
Cc: <stable@vger.kernel.org> # v4.19
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Chen Jingwen <chenjingwen6@huawei.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 months agoMerge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sun, 3 Oct 2021 20:56:53 +0000 (13:56 -0700)]
Merge tag 'ext4_for_linus_stable' of git://git./linux/kernel/git/tytso/ext4

Pull ext4 fixes from Ted Ts'o:
 "Fix a number of ext4 bugs in fast_commit, inline data, and delayed
  allocation.

  Also fix error handling code paths in ext4_dx_readdir() and
  ext4_fill_super().

  Finally, avoid a grabbing a journal head in the delayed allocation
  write in the common cases where we are overwriting a pre-existing
  block or appending to an inode"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: recheck buffer uptodate bit under buffer lock
  ext4: fix potential infinite loop in ext4_dx_readdir()
  ext4: flush s_error_work before journal destroy in ext4_fill_super
  ext4: fix loff_t overflow in ext4_max_bitmap_size()
  ext4: fix reserved space counter leakage
  ext4: limit the number of blocks in one ADD_RANGE TLV
  ext4: enforce buffer head state assertion in ext4_da_map_blocks
  ext4: remove extent cache entries when truncating inline data
  ext4: drop unnecessary journal handle in delalloc write
  ext4: factor out write end code of inline file
  ext4: correct the error path of ext4_write_inline_data_end()
  ext4: check and update i_disksize properly
  ext4: add error checking to ext4_ext_replay_set_iblocks()

9 months agoobjtool: print out the symbol type when complaining about it
Linus Torvalds [Sun, 3 Oct 2021 20:45:48 +0000 (13:45 -0700)]
objtool: print out the symbol type when complaining about it

The objtool warning that the kvm instruction emulation code triggered
wasn't very useful:

    arch/x86/kvm/emulate.o: warning: objtool: __ex_table+0x4: don't know how to handle reloc symbol type: kvm_fastop_exception

in that it helpfully tells you which symbol name it had trouble figuring
out the relocation for, but it doesn't actually say what the unknown
symbol type was that triggered it all.

In this case it was because of missing type information (type 0, aka
STT_NOTYPE), but on the whole it really should just have printed that
out as part of the message.

Because if this warning triggers, that's very much the first thing you
want to know - why did reloc2sec_off() return failure for that symbol?

So rather than just saying you can't handle some type of symbol without
saying what the type _was_, just print out the type number too.

Fixes: 24ff65257375 ("objtool: Teach get_alt_entry() about more relocation types")
Link: https://lore.kernel.org/lkml/CAHk-=wiZwq-0LknKhXN4M+T8jbxn_2i9mcKpO+OaBSSq_Eh7tg@mail.gmail.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 months agokvm: fix objtool relocation warning
Linus Torvalds [Sun, 3 Oct 2021 20:34:19 +0000 (13:34 -0700)]
kvm: fix objtool relocation warning

The recent change to make objtool aware of more symbol relocation types
(commit 24ff65257375: "objtool: Teach get_alt_entry() about more
relocation types") also added another check, and resulted in this
objtool warning when building kvm on x86:

    arch/x86/kvm/emulate.o: warning: objtool: __ex_table+0x4: don't know how to handle reloc symbol type: kvm_fastop_exception

The reason seems to be that kvm_fastop_exception() is marked as a global
symbol, which causes the relocation to ke kept around for objtool.  And
at the same time, the kvm_fastop_exception definition (which is done as
an inline asm statement) doesn't actually set the type of the global,
which then makes objtool unhappy.

The minimal fix is to just not mark kvm_fastop_exception as being a
global symbol.  It's only used in that one compilation unit anyway, so
it was always pointless.  That's how all the other local exception table
labels are done.

I'm not entirely happy about the kinds of games that the kvm code plays
with doing its own exception handling, and the fact that it confused
objtool is most definitely a symptom of the code being a bit too subtle
and ad-hoc.  But at least this trivial one-liner makes objtool no longer
upset about what is going on.

Fixes: 24ff65257375 ("objtool: Teach get_alt_entry() about more relocation types")
Link: https://lore.kernel.org/lkml/CAHk-=wiZwq-0LknKhXN4M+T8jbxn_2i9mcKpO+OaBSSq_Eh7tg@mail.gmail.com/
Cc: Borislav Petkov <bp@suse.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Wanpeng Li <wanpengli@tencent.com>
Cc: Jim Mattson <jmattson@google.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 months agoMerge tag 'char-misc-5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregk...
Linus Torvalds [Sun, 3 Oct 2021 18:19:02 +0000 (11:19 -0700)]
Merge tag 'char-misc-5.15-rc4' of git://git./linux/kernel/git/gregkh/char-misc

Pull char/misc driver fixes from Greg KH:
 "Here are some small misc driver fixes for 5.15-rc4. They are in two
  "groups":

   - ipack driver fixes for issues found by Johan Hovold

   - interconnect driver fixes for reported problems

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  ipack: ipoctal: fix module reference leak
  ipack: ipoctal: fix missing allocation-failure check
  ipack: ipoctal: fix tty-registration error handling
  ipack: ipoctal: fix tty registration race
  ipack: ipoctal: fix stack information leak
  interconnect: qcom: sdm660: Add missing a2noc qos clocks
  dt-bindings: interconnect: sdm660: Add missing a2noc qos clocks
  interconnect: qcom: sdm660: Correct NOC_QOS_PRIORITY shift and mask
  interconnect: qcom: sdm660: Fix id of slv_cnoc_mnoc_cfg

9 months agoMerge tag 'driver-core-5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sun, 3 Oct 2021 18:10:09 +0000 (11:10 -0700)]
Merge tag 'driver-core-5.15-rc4' of git://git./linux/kernel/git/gregkh/driver-core

Pull driver core fixes from Greg KH:
 "Here are some driver core and kernfs fixes for reported issues for
  5.15-rc4. These fixes include:

   - kernfs positive dentry bugfix

   - debugfs_create_file_size error path fix

   - cpumask sysfs file bugfix to preserve the user/kernel abi (has been
     reported multiple times.)

   - devlink fixes for mdiobus devices as reported by the subsystem
     maintainers.

  Also included in here are some devlink debugging changes to make it
  easier for people to report problems when asked. They have already
  helped with the mdiobus and other subsystems reporting issues.

  All of these have been linux-next for a while with no reported issues"

* tag 'driver-core-5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  kernfs: also call kernfs_set_rev() for positive dentry
  driver core: Add debug logs when fwnode links are added/deleted
  driver core: Create __fwnode_link_del() helper function
  driver core: Set deferred probe reason when deferred by driver core
  net: mdiobus: Set FWNODE_FLAG_NEEDS_CHILD_BOUND_ON_ADD for mdiobus parents
  driver core: fw_devlink: Add support for FWNODE_FLAG_NEEDS_CHILD_BOUND_ON_ADD
  driver core: fw_devlink: Improve handling of cyclic dependencies
  cpumask: Omit terminating null byte in cpumap_print_{list,bitmask}_to_buf
  debugfs: debugfs_create_file_size(): use IS_ERR to check for error

9 months agoMerge tag 'sched_urgent_for_v5.15_rc4' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 3 Oct 2021 17:49:00 +0000 (10:49 -0700)]
Merge tag 'sched_urgent_for_v5.15_rc4' of git://git./linux/kernel/git/tip/tip

Pull scheduler fixes from Borislav Petkov:

 - Tell the compiler to always inline is_percpu_thread()

 - Make sure tunable_scaling buffer is null-terminated after an update
   in sysfs

 - Fix LTP named regression due to cgroup list ordering

* tag 'sched_urgent_for_v5.15_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Always inline is_percpu_thread()
  sched/fair: Null terminate buffer when updating tunable_scaling
  sched/fair: Add ancestors of unthrottled undecayed cfs_rq

9 months agoMerge tag 'perf_urgent_for_v5.15_rc4' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 3 Oct 2021 17:32:27 +0000 (10:32 -0700)]
Merge tag 'perf_urgent_for_v5.15_rc4' of git://git./linux/kernel/git/tip/tip

Pull perf fixes from Borislav Petkov:

 - Make sure the destroy callback is reset when a event initialization
   fails

 - Update the event constraints for Icelake

 - Make sure the active time of an event is updated even for inactive
   events

* tag 'perf_urgent_for_v5.15_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: fix userpage->time_enabled of inactive events
  perf/x86/intel: Update event constraints for ICX
  perf/x86: Reset destroy callback on event init failure

9 months agoMerge tag 'objtool_urgent_for_v5.15_rc4' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 3 Oct 2021 17:23:54 +0000 (10:23 -0700)]
Merge tag 'objtool_urgent_for_v5.15_rc4' of git://git./linux/kernel/git/tip/tip

Pull objtool fix from Borislav Petkov:

 - Handle symbol relocations properly due to changes in the toolchains
   which remove section symbols now

* tag 'objtool_urgent_for_v5.15_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Teach get_alt_entry() about more relocation types

9 months agoMerge tag 'hwmon-for-v5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sun, 3 Oct 2021 00:51:01 +0000 (17:51 -0700)]
Merge tag 'hwmon-for-v5.15-rc4' of git://git./linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:

 - Fixed various potential NULL pointer accesses in w8379* drivers

 - Improved error handling, fault reporting, and fixed rounding in
   thmp421 driver

 - Fixed error handling in ltc2947 driver

 - Added missing attribute to pmbus/mp2975 driver

 - Fixed attribute values in pbus/ibm-cffps, occ, and mlxreg-fan
   drivers

 - Removed unused residual code from k10temp driver

* tag 'hwmon-for-v5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (w83793) Fix NULL pointer dereference by removing unnecessary structure field
  hwmon: (w83792d) Fix NULL pointer dereference by removing unnecessary structure field
  hwmon: (w83791d) Fix NULL pointer dereference by removing unnecessary structure field
  hwmon: (pmbus/mp2975) Add missed POUT attribute for page 1 mp2975 controller
  hwmon: (pmbus/ibm-cffps) max_power_out swap changes
  hwmon: (occ) Fix P10 VRM temp sensors
  hwmon: (ltc2947) Properly handle errors when looking for the external clock
  hwmon: (tmp421) fix rounding for negative values
  hwmon: (tmp421) report /PVLD condition as fault
  hwmon: (tmp421) handle I2C errors
  hwmon: (mlxreg-fan) Return non-zero value when fan current state is enforced from sysfs
  hwmon: (k10temp) Remove residues of current and voltage

9 months agoMerge tag '5.15-rc3-ksmbd-fixes' of git://git.samba.org/ksmbd
Linus Torvalds [Sun, 3 Oct 2021 00:43:54 +0000 (17:43 -0700)]
Merge tag '5.15-rc3-ksmbd-fixes' of git://git.samba.org/ksmbd

Pull ksmbd server fixes from Steve French:
 "Eleven fixes for the ksmbd kernel server, mostly security related:

   - an important fix for disabling weak NTLMv1 authentication

   - seven security (improved buffer overflow checks) fixes

   - fix for wrong infolevel struct used in some getattr/setattr paths

   - two small documentation fixes"

* tag '5.15-rc3-ksmbd-fixes' of git://git.samba.org/ksmbd:
  ksmbd: missing check for NULL in convert_to_nt_pathname()
  ksmbd: fix transform header validation
  ksmbd: add buffer validation for SMB2_CREATE_CONTEXT
  ksmbd: add validation in smb2 negotiate
  ksmbd: add request buffer validation in smb2_set_info
  ksmbd: use correct basic info level in set_file_basic_info()
  ksmbd: remove NTLMv1 authentication
  ksmbd: fix documentation for 2 functions
  MAINTAINERS: rename cifs_common to smbfs_common in cifs and ksmbd entry
  ksmbd: fix invalid request buffer access in compound
  ksmbd: remove RFC1002 check in smb2 request

9 months agoMerge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Linus Torvalds [Sat, 2 Oct 2021 19:56:03 +0000 (12:56 -0700)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "Five fairly minor fixes and spelling updates, all in drivers. Even
  though the ufs fix is in tracing, it's a potentially exploitable use
  beyond end of array bug"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: csiostor: Add module softdep on cxgb4
  scsi: qla2xxx: Fix excessive messages during device logout
  scsi: virtio_scsi: Fix spelling mistake "Unsupport" -> "Unsupported"
  scsi: ses: Fix unsigned comparison with less than zero
  scsi: ufs: Fix illegal offset in UPIU event trace

9 months agoMerge tag 'block-5.15-2021-10-01' of git://git.kernel.dk/linux-block
Linus Torvalds [Sat, 2 Oct 2021 18:00:36 +0000 (11:00 -0700)]
Merge tag 'block-5.15-2021-10-01' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:
 "A few block fixes for this release:

   - Revert a BFQ commit that causes breakage for people. Unfortunately
     it was auto-selected for stable as well, so now 5.14.7 suffers from
     it too. Hopefully stable will pick up this revert quickly too, so
     we can remove the issue on that end as well.

   - Add a quirk for Apple NVMe controllers, which due to their
     non-compliance broke due to the introduction of command sequences
     (Keith)

   - Use shifts in nbd, fixing a __divdi3 issue (Nick)"

* tag 'block-5.15-2021-10-01' of git://git.kernel.dk/linux-block:
  nbd: use shifts rather than multiplies
  Revert "block, bfq: honor already-setup queue merges"
  nvme: add command id quirk for apple controllers

9 months agoMerge tag 'io_uring-5.15-2021-10-01' of git://git.kernel.dk/linux-block
Linus Torvalds [Sat, 2 Oct 2021 17:26:19 +0000 (10:26 -0700)]
Merge tag 'io_uring-5.15-2021-10-01' of git://git.kernel.dk/linux-block

Pull io_uring fixes from Jens Axboe:
 "Two fixes in here:

   - The signal issue that was discussed start of this week (me).

   - Kill dead fasync support in io_uring. Looks like it was broken
     since io_uring was initially merged, and given that nobody has ever
     complained about it, let's just kill it (Pavel)"

* tag 'io_uring-5.15-2021-10-01' of git://git.kernel.dk/linux-block:
  io_uring: kill fasync
  io-wq: exclusively gate signal based exit on get_signal() return

9 months agoMerge tag 'libnvdimm-fixes-5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sat, 2 Oct 2021 17:08:35 +0000 (10:08 -0700)]
Merge tag 'libnvdimm-fixes-5.15-rc4' of git://git./linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm fixes from Dan Williams:
 "A fix for a regression added this cycle in the pmem driver, and for a
  long standing bug for failed NUMA node lookups on ARM64.

  This has appeared in -next for several days with no reported issues.

  Summary:

   - Fix a regression that caused the sysfs ABI for pmem block devices
     to not be registered. This fails the nvdimm unit tests and dax
     xfstests.

   - Fix numa node lookups for dax-kmem memory (device-dax memory
     assigned to the page allocator) on ARM64"

* tag 'libnvdimm-fixes-5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  nvdimm/pmem: fix creating the dax group
  ACPI: NFIT: Use fallback node id when numa info in NFIT table is incorrect

9 months agocachefiles: Fix oops in trace_cachefiles_mark_buried due to NULL object
Dave Wysochanski [Fri, 1 Oct 2021 14:37:31 +0000 (15:37 +0100)]
cachefiles: Fix oops in trace_cachefiles_mark_buried due to NULL object

In cachefiles_mark_object_buried, the dentry in question may not have an
owner, and thus our cachefiles_object pointer may be NULL when calling
the tracepoint, in which case we will also not have a valid debug_id to
print in the tracepoint.

Check for NULL object in the tracepoint and if so, just set debug_id to
MAX_UINT as was done in 2908f5e101e3 ("fscache: Add a cookie debug ID
and use that in traces").

This fixes the following oops:

    FS-Cache: Cache "mycache" added (type cachefiles)
    CacheFiles: File cache on vdc registered
    ...
    Workqueue: fscache_object fscache_object_work_func [fscache]
    RIP: 0010:trace_event_raw_event_cachefiles_mark_buried+0x4e/0xa0 [cachefiles]
    ....
    Call Trace:
     cachefiles_mark_object_buried+0xa5/0xb0 [cachefiles]
     cachefiles_bury_object+0x270/0x430 [cachefiles]
     cachefiles_walk_to_object+0x195/0x9c0 [cachefiles]
     cachefiles_lookup_object+0x5a/0xc0 [cachefiles]
     fscache_look_up_object+0xd7/0x160 [fscache]
     fscache_object_work_func+0xb2/0x340 [fscache]
     process_one_work+0x1f1/0x390
     worker_thread+0x53/0x3e0
     kthread+0x127/0x150

Fixes: 2908f5e101e3 ("fscache: Add a cookie debug ID and use that in traces")
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-cachefs@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 months agodrm/i915: fix blank screen booting crashes
Hugh Dickins [Sat, 2 Oct 2021 10:17:29 +0000 (03:17 -0700)]
drm/i915: fix blank screen booting crashes

5.15-rc1 crashes with blank screen when booting up on two ThinkPads
using i915.  Bisections converge convincingly, but arrive at different
and suprising "culprits", none of them the actual culprit.

netconsole (with init_netconsole() hacked to call i915_init() when
logging has started, instead of by module_init()) tells the story:

kernel BUG at drivers/gpu/drm/i915/i915_sw_fence.c:245!
with RSI: ffffffff814d408b pointing to sw_fence_dummy_notify().
I've been building with CONFIG_CC_OPTIMIZE_FOR_SIZE=y, and that
function needs to be 4-byte aligned.

Fixes: 62eaf0ae217d ("drm/i915/guc: Support request cancellation")
Signed-off-by: Hugh Dickins <hughd@google.com>
Tested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 months agohwmon: (w83793) Fix NULL pointer dereference by removing unnecessary structure field
Nadezda Lutovinova [Tue, 21 Sep 2021 15:51:53 +0000 (18:51 +0300)]
hwmon: (w83793) Fix NULL pointer dereference by removing unnecessary structure field

If driver read tmp value sufficient for
(tmp & 0x08) && (!(tmp & 0x80)) && ((tmp & 0x7) == ((tmp >> 4) & 0x7))
from device then Null pointer dereference occurs.
(It is possible if tmp = 0b0xyz1xyz, where same literals mean same numbers)
Also lm75[] does not serve a purpose anymore after switching to
devm_i2c_new_dummy_device() in w83791d_detect_subclients().

The patch fixes possible NULL pointer dereference by removing lm75[].

Found by Linux Driver Verification project (linuxtesting.org).

Cc: stable@vger.kernel.org
Signed-off-by: Nadezda Lutovinova <lutovinova@ispras.ru>
Link: https://lore.kernel.org/r/20210921155153.28098-3-lutovinova@ispras.ru
[groeck: Dropped unnecessary continuation lines, fixed multi-line alignments]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
9 months agohwmon: (w83792d) Fix NULL pointer dereference by removing unnecessary structure field
Nadezda Lutovinova [Tue, 21 Sep 2021 15:51:52 +0000 (18:51 +0300)]
hwmon: (w83792d) Fix NULL pointer dereference by removing unnecessary structure field

If driver read val value sufficient for
(val & 0x08) && (!(val & 0x80)) && ((val & 0x7) == ((val >> 4) & 0x7))
from device then Null pointer dereference occurs.
(It is possible if tmp = 0b0xyz1xyz, where same literals mean same numbers)
Also lm75[] does not serve a purpose anymore after switching to
devm_i2c_new_dummy_device() in w83791d_detect_subclients().

The patch fixes possible NULL pointer dereference by removing lm75[].

Found by Linux Driver Verification project (linuxtesting.org).

Cc: stable@vger.kernel.org
Signed-off-by: Nadezda Lutovinova <lutovinova@ispras.ru>
Link: https://lore.kernel.org/r/20210921155153.28098-2-lutovinova@ispras.ru
[groeck: Dropped unnecessary continuation lines, fixed multipline alignment]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
9 months agohwmon: (w83791d) Fix NULL pointer dereference by removing unnecessary structure field
Nadezda Lutovinova [Tue, 21 Sep 2021 15:51:51 +0000 (18:51 +0300)]
hwmon: (w83791d) Fix NULL pointer dereference by removing unnecessary structure field

If driver read val value sufficient for
(val & 0x08) && (!(val & 0x80)) && ((val & 0x7) == ((val >> 4) & 0x7))
from device then Null pointer dereference occurs.
(It is possible if tmp = 0b0xyz1xyz, where same literals mean same numbers)
Also lm75[] does not serve a purpose anymore after switching to
devm_i2c_new_dummy_device() in w83791d_detect_subclients().

The patch fixes possible NULL pointer dereference by removing lm75[].

Found by Linux Driver Verification project (linuxtesting.org).

Cc: stable@vger.kernel.org
Signed-off-by: Nadezda Lutovinova <lutovinova@ispras.ru>
Link: https://lore.kernel.org/r/20210921155153.28098-1-lutovinova@ispras.ru
[groeck: Dropped unnecessary continuation lines, fixed multi-line alignment]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
9 months agohwmon: (pmbus/mp2975) Add missed POUT attribute for page 1 mp2975 controller
Vadim Pasternak [Mon, 27 Sep 2021 07:07:40 +0000 (10:07 +0300)]
hwmon: (pmbus/mp2975) Add missed POUT attribute for page 1 mp2975 controller

Add missed attribute for reading POUT from page 1.
It is supported by device, but has been missed in initial commit.

Fixes: 2c6fcbb21149 ("hwmon: (pmbus) Add support for MPS Multi-phase mp2975 controller")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20210927070740.2149290-1-vadimp@nvidia.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
9 months agohwmon: (pmbus/ibm-cffps) max_power_out swap changes
Brandon Wyman [Tue, 28 Sep 2021 20:50:51 +0000 (20:50 +0000)]
hwmon: (pmbus/ibm-cffps) max_power_out swap changes

The bytes for max_power_out from the ibm-cffps devices differ in byte
order for some power supplies.

The Witherspoon power supply returns the bytes in MSB/LSB order.

The Rainier power supply returns the bytes in LSB/MSB order.

The Witherspoon power supply uses version cffps1. The Rainier power
supply should use version cffps2. If version is cffps1, swap the bytes
before output to max_power_out.

Tested:
    Witherspoon before: 3148. Witherspoon after: 3148.
    Rainier before: 53255. Rainier after: 2000.

Signed-off-by: Brandon Wyman <bjwyman@gmail.com>
Reviewed-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210928205051.1222815-1-bjwyman@gmail.com
[groeck: Replaced yoda programming]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
9 months agohwmon: (occ) Fix P10 VRM temp sensors
Eddie James [Wed, 29 Sep 2021 15:36:04 +0000 (10:36 -0500)]
hwmon: (occ) Fix P10 VRM temp sensors

The P10 (temp sensor version 0x10) doesn't do the same VRM status
reporting that was used on P9. It just reports the temperature, so
drop the check for VRM fru type in the sysfs show function, and don't
set the name to "alarm".

Fixes: db4919ec86 ("hwmon: (occ) Add new temperature sensor type")
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210929153604.14968-1-eajames@linux.ibm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
9 months agoMIPS: Revert "add support for buggy MT7621S core detection"
Ilya Lipnitskiy [Thu, 30 Sep 2021 16:57:41 +0000 (09:57 -0700)]
MIPS: Revert "add support for buggy MT7621S core detection"

This reverts commit 6decd1aad15f56b169217789630a0098b496de0e. CPULAUNCH
register is not set properly by some bootloaders, causing a regression
until a bootloader change is made, which is hard if not impossible on
some embedded devices. Revert the change until a more robust core
detection mechanism that works on MT7621S routers such as Netgear R6220
as well as platforms like Digi EX15 can be made.

Link: https://lore.kernel.org/lkml/4d9e3b39-7caa-d372-5d7b-42dcec36fec7@kernel.org
Fixes: 6decd1aad15f ("MIPS: add support for buggy MT7621S core detection")
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Acked-by: Greg Ungerer <gerg@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
9 months agoMerge tag 's390-5.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Linus Torvalds [Fri, 1 Oct 2021 21:45:23 +0000 (14:45 -0700)]
Merge tag 's390-5.15-4' of git://git./linux/kernel/git/s390/linux

Pull s390 fix from Vasily Gorbik:
 "One fix for 5.15-rc4: Avoid CIO excessive path-verification requests,
  which might cause unwanted delays"

* tag 's390-5.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/cio: avoid excessive path-verification requests

9 months agothermal: Update information in MAINTAINERS
Rafael J. Wysocki [Fri, 1 Oct 2021 17:14:28 +0000 (19:14 +0200)]
thermal: Update information in MAINTAINERS

Because Rui is now going to focus on work that is not related to the
maintenance of the thermal subsystem in the kernel, Rafael will start
to help Daniel with handling the development process as a new member
of the thermal maintainers team.  Rui will continue to review patches
in that area.

The thermal development process flow will change so that the material
from the thermal git tree will be merged into the thermal branch of
the linux-pm.git tree before going into the mainline.

Update the information in MAINTAINERS accordingly.

Signed-off-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
9 months agoMerge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Linus Torvalds [Fri, 1 Oct 2021 18:08:07 +0000 (11:08 -0700)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull more kvm fixes from Paolo Bonzini:
 "Small x86 fixes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: selftests: Ensure all migrations are performed when test is affined
  KVM: x86: Swap order of CPUID entry "index" vs. "significant flag" checks
  ptp: Fix ptp_kvm_getcrosststamp issue for x86 ptp_kvm
  x86/kvmclock: Move this_cpu_pvti into kvmclock.h
  selftests: KVM: Don't clobber XMM register when read
  KVM: VMX: Fix a TSX_CTRL_CPUID_CLEAR field mask issue

9 months agoMerge tag 'drm-fixes-2021-10-01' of git://anongit.freedesktop.org/drm/drm
Linus Torvalds [Fri, 1 Oct 2021 17:27:44 +0000 (10:27 -0700)]
Merge tag 'drm-fixes-2021-10-01' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Daniel Vetter:
 "Dave is out on a long w/e, should be back next week.

  Nothing nefarious, just a bunch of driver fixes: amdgpu, i915, tegra,
  and one exynos driver fix"

* tag 'drm-fixes-2021-10-01' of git://anongit.freedesktop.org/drm/drm:
  drm/amdgpu: force exit gfxoff on sdma resume for rmb s0ix
  drm/amdgpu: check tiling flags when creating FB on GFX8-
  drm/amd/display: Pass PCI deviceid into DC
  drm/amd/display: initialize backlight_ramping_override to false
  drm/amdgpu: correct initial cp_hqd_quantum for gfx9
  drm/amd/display: Fix Display Flicker on embedded panels
  drm/amdgpu: fix gart.bo pin_count leak
  drm/i915: Remove warning from the rps worker
  drm/i915/request: fix early tracepoints
  drm/i915/guc, docs: Fix pdfdocs build error by removing nested grid
  gpu: host1x: Plug potential memory leak
  gpu/host1x: fence: Make spinlock static
  drm/tegra: uapi: Fix wrong mapping end address in case of disabled IOMMU
  drm/tegra: dc: Remove unused variables
  drm/exynos: Make use of the helper function devm_platform_ioremap_resource()
  drm/i915/gvt: fix the usage of ww lock in gvt scheduler.

9 months agoio_uring: kill fasync
Pavel Begunkov [Fri, 1 Oct 2021 09:39:33 +0000 (10:39 +0100)]
io_uring: kill fasync

We have never supported fasync properly, it would only fire when there
is something polling io_uring making it useless. The original support came
in through the initial io_uring merge for 5.1. Since it's broken and
nobody has reported it, get rid of the fasync bits.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/2f7ca3d344d406d34fa6713824198915c41cea86.1633080236.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
9 months agoMerge tag 'iommu-fixes-v5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Fri, 1 Oct 2021 17:14:29 +0000 (10:14 -0700)]
Merge tag 'iommu-fixes-v5.15-rc3' of git://git./linux/kernel/git/joro/iommu

Pull iommu fixes from Joerg Roedel:

 - Two fixes for the new Apple DART driver to fix a kernel panic and a
   stale data usage issue

 - Intel VT-d fix for how PCI device ids are printed

* tag 'iommu-fixes-v5.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/dart: Clear sid2group entry when a group is freed
  iommu/vt-d: Drop "0x" prefix from PCI bus & device addresses
  iommu/dart: Remove iommu_flush_ops

9 months agoMerge tag 'exynos-drm-fixes-for-v5.15-rc4' of git://git.kernel.org/pub/scm/linux...
Daniel Vetter [Fri, 1 Oct 2021 16:14:38 +0000 (18:14 +0200)]
Merge tag 'exynos-drm-fixes-for-v5.15-rc4' of git://git./linux/kernel/git/daeinki/drm-exynos into drm-fixes

One cleanup
- Use devm_platform_ioremap_resource() helper function instead of old
one.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210928074158.2942-1-inki.dae@samsung.com
9 months agoMerge tag 'amd-drm-fixes-5.15-2021-09-29' of https://gitlab.freedesktop.org/agd5f...
Daniel Vetter [Fri, 1 Oct 2021 14:59:21 +0000 (16:59 +0200)]
Merge tag 'amd-drm-fixes-5.15-2021-09-29' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-5.15-2021-09-29:

amdgpu:
- gart pin count fix
- eDP flicker fix
- GFX9 MQD fix
- Display fixes
- Tiling flags fix for pre-GFX9
- SDMA resume fix for S0ix

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210930023013.5207-1-alexander.deucher@amd.com
9 months agoMerge tag 'drm-intel-fixes-2021-09-30' of git://anongit.freedesktop.org/drm/drm-intel...
Daniel Vetter [Fri, 1 Oct 2021 14:47:18 +0000 (16:47 +0200)]
Merge tag 'drm-intel-fixes-2021-09-30' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

drm/i915 fixes for v5.15-rc4:
- Fix GVT scheduler ww lock usage
- Fix pdfdocs documentation build
- Fix request early tracepoints
- Fix an invalid warning from rps worker

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87lf3ev44z.fsf@intel.com
9 months agosched: Always inline is_percpu_thread()
Peter Zijlstra [Mon, 20 Sep 2021 13:31:11 +0000 (15:31 +0200)]
sched: Always inline is_percpu_thread()

  vmlinux.o: warning: objtool: check_preemption_disabled()+0x81: call to is_percpu_thread() leaves .noinstr.text section

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210928084218.063371959@infradead.org
9 months agosched/fair: Null terminate buffer when updating tunable_scaling
Mel Gorman [Mon, 27 Sep 2021 11:46:35 +0000 (12:46 +0100)]
sched/fair: Null terminate buffer when updating tunable_scaling

This patch null-terminates the temporary buffer in sched_scaling_write()
so kstrtouint() does not return failure and checks the value is valid.

Before:
  $ cat /sys/kernel/debug/sched/tunable_scaling
  1
  $ echo 0 > /sys/kernel/debug/sched/tunable_scaling
  -bash: echo: write error: Invalid argument
  $ cat /sys/kernel/debug/sched/tunable_scaling
  1

After:
  $ cat /sys/kernel/debug/sched/tunable_scaling
  1
  $ echo 0 > /sys/kernel/debug/sched/tunable_scaling
  $ cat /sys/kernel/debug/sched/tunable_scaling
  0
  $ echo 3 > /sys/kernel/debug/sched/tunable_scaling
  -bash: echo: write error: Invalid argument

Fixes: 8a99b6833c88 ("sched: Move SCHED_DEBUG sysctl to debugfs")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20210927114635.GH3959@techsingularity.net
9 months agosched/fair: Add ancestors of unthrottled undecayed cfs_rq
Michal Koutný [Fri, 17 Sep 2021 15:30:37 +0000 (17:30 +0200)]
sched/fair: Add ancestors of unthrottled undecayed cfs_rq

Since commit a7b359fc6a37 ("sched/fair: Correctly insert cfs_rq's to
list on unthrottle") we add cfs_rqs with no runnable tasks but not fully
decayed into the load (leaf) list. We may ignore adding some ancestors
and therefore breaking tmp_alone_branch invariant. This broke LTP test
cfs_bandwidth01 and it was partially fixed in commit fdaba61ef8a2
("sched/fair: Ensure that the CFS parent is added after unthrottling").

I noticed the named test still fails even with the fix (but with low
probability, 1 in ~1000 executions of the test). The reason is when
bailing out of unthrottle_cfs_rq early, we may miss adding ancestors of
the unthrottled cfs_rq, thus, not joining tmp_alone_branch properly.

Fix this by adding ancestors if we notice the unthrottled cfs_rq was
added to the load list.

Fixes: a7b359fc6a37 ("sched/fair: Correctly insert cfs_rq's to list on unthrottle")
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Odin Ugedal <odin@uged.al>
Link: https://lore.kernel.org/r/20210917153037.11176-1-mkoutny@suse.com
9 months agoperf/core: fix userpage->time_enabled of inactive events
Song Liu [Wed, 29 Sep 2021 19:43:13 +0000 (12:43 -0700)]
perf/core: fix userpage->time_enabled of inactive events

Users of rdpmc rely on the mmapped user page to calculate accurate
time_enabled. Currently, userpage->time_enabled is only updated when the
event is added to the pmu. As a result, inactive event (due to counter
multiplexing) does not have accurate userpage->time_enabled. This can
be reproduced with something like:

   /* open 20 task perf_event "cycles", to create multiplexing */

   fd = perf_event_open();  /* open task perf_event "cycles" */
   userpage = mmap(fd);     /* use mmap and rdmpc */

   while (true) {
     time_enabled_mmap = xxx; /* use logic in perf_event_mmap_page */
     time_enabled_read = read(fd).time_enabled;
     if (time_enabled_mmap > time_enabled_read)
         BUG();
   }

Fix this by updating userpage for inactive events in merge_sched_in.

Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reported-and-tested-by: Lucian Grijincu <lucian@fb.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210929194313.2398474-1-songliubraving@fb.com
9 months agoperf/x86/intel: Update event constraints for ICX
Kan Liang [Tue, 28 Sep 2021 15:19:03 +0000 (08:19 -0700)]
perf/x86/intel: Update event constraints for ICX

According to the latest event list, the event encoding 0xEF is only
available on the first 4 counters. Add it into the event constraints
table.

Fixes: 6017608936c1 ("perf/x86/intel: Add Icelake support")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1632842343-25862-1-git-send-email-kan.liang@linux.intel.com
9 months agoperf/x86: Reset destroy callback on event init failure
Anand K Mistry [Wed, 29 Sep 2021 07:04:21 +0000 (17:04 +1000)]
perf/x86: Reset destroy callback on event init failure

perf_init_event tries multiple init callbacks and does not reset the
event state between tries. When x86_pmu_event_init runs, it
unconditionally sets the destroy callback to hw_perf_event_destroy. On
the next init attempt after x86_pmu_event_init, in perf_try_init_event,
if the pmu's capabilities includes PERF_PMU_CAP_NO_EXCLUDE, the destroy
callback will be run. However, if the next init didn't set the destroy
callback, hw_perf_event_destroy will be run (since the callback wasn't
reset).

Looking at other pmu init functions, the common pattern is to only set
the destroy callback on a successful init. Resetting the callback on
failure tries to replicate that pattern.

This was discovered after commit f11dd0d80555 ("perf/x86/amd/ibs: Extend
PERF_PMU_CAP_NO_EXCLUDE to IBS Op") when the second (and only second)
run of the perf tool after a reboot results in 0 samples being
generated. The extra run of hw_perf_event_destroy results in
active_events having an extra decrement on each perf run. The second run
has active_events == 0 and every subsequent run has active_events < 0.
When active_events == 0, the NMI handler will early-out and not record
any samples.

Signed-off-by: Anand K Mistry <amistry@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210929170405.1.I078b98ee7727f9ae9d6df8262bad7e325e40faf0@changeid
9 months agoobjtool: Teach get_alt_entry() about more relocation types
Peter Zijlstra [Thu, 30 Sep 2021 10:43:10 +0000 (12:43 +0200)]
objtool: Teach get_alt_entry() about more relocation types

Occasionally objtool encounters symbol (as opposed to section)
relocations in .altinstructions. Typically they are the alternatives
written by elf_add_alternative() as encountered on a noinstr
validation run on vmlinux after having already ran objtool on the
individual .o files.

Basically this is the counterpart of commit 44f6a7c0755d ("objtool:
Fix seg fault with Clang non-section symbols"), because when these new
assemblers (binutils now also does this) strip the section symbols,
elf_add_reloc_to_insn() is forced to emit symbol based relocations.

As such, teach get_alt_entry() about different relocation types.

Fixes: 9bc0bb50727c ("objtool/x86: Rewrite retpoline thunk calls")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/YVWUvknIEVNkPvnP@hirez.programming.kicks-ass.net
9 months agoext4: recheck buffer uptodate bit under buffer lock
Zhang Yi [Fri, 10 Sep 2021 08:03:16 +0000 (16:03 +0800)]
ext4: recheck buffer uptodate bit under buffer lock

Commit 8e33fadf945a ("ext4: remove an unnecessary if statement in
__ext4_get_inode_loc()") forget to recheck buffer's uptodate bit again
under buffer lock, which may overwrite the buffer if someone else have
already brought it uptodate and changed it.

Fixes: 8e33fadf945a ("ext4: remove an unnecessary if statement in __ext4_get_inode_loc()")
Cc: stable@kernel.org
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210910080316.70421-1-yi.zhang@huawei.com
9 months agoext4: fix potential infinite loop in ext4_dx_readdir()
yangerkun [Tue, 14 Sep 2021 11:14:15 +0000 (19:14 +0800)]
ext4: fix potential infinite loop in ext4_dx_readdir()

When ext4_htree_fill_tree() fails, ext4_dx_readdir() can run into an
infinite loop since if info->last_pos != ctx->pos this will reset the
directory scan and reread the failing entry.  For example:

1. a dx_dir which has 3 block, block 0 as dx_root block, block 1/2 as
   leaf block which own the ext4_dir_entry_2
2. block 1 read ok and call_filldir which will fill the dirent and update
   the ctx->pos
3. block 2 read fail, but we has already fill some dirent, so we will
   return back to userspace will a positive return val(see ksys_getdents64)
4. the second ext4_dx_readdir will reset the world since info->last_pos
   != ctx->pos, and will also init the curr_hash which pos to block 1
5. So we will read block1 too, and once block2 still read fail, we can
   only fill one dirent because the hash of the entry in block1(besides
   the last one) won't greater than curr_hash
6. this time, we forget update last_pos too since the read for block2
   will fail, and since we has got the one entry, ksys_getdents64 can
   return success
7. Latter we will trapped in a loop with step 4~6

Cc: stable@kernel.org
Signed-off-by: yangerkun <yangerkun@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210914111415.3921954-1-yangerkun@huawei.com
9 months agoext4: flush s_error_work before journal destroy in ext4_fill_super
yangerkun [Fri, 24 Sep 2021 09:39:17 +0000 (17:39 +0800)]
ext4: flush s_error_work before journal destroy in ext4_fill_super

The error path in ext4_fill_super forget to flush s_error_work before
journal destroy, and it may trigger the follow bug since
flush_stashed_error_work can run concurrently with journal destroy
without any protection for sbi->s_journal.

[32031.740193] EXT4-fs (loop66): get root inode failed
[32031.740484] EXT4-fs (loop66): mount failed
[32031.759805] ------------[ cut here ]------------
[32031.759807] kernel BUG at fs/jbd2/transaction.c:373!
[32031.760075] invalid opcode: 0000 [#1] SMP PTI
[32031.760336] CPU: 5 PID: 1029268 Comm: kworker/5:1 Kdump: loaded
4.18.0
[32031.765112] Call Trace:
[32031.765375]  ? __switch_to_asm+0x35/0x70
[32031.765635]  ? __switch_to_asm+0x41/0x70
[32031.765893]  ? __switch_to_asm+0x35/0x70
[32031.766148]  ? __switch_to_asm+0x41/0x70
[32031.766405]  ? _cond_resched+0x15/0x40
[32031.766665]  jbd2__journal_start+0xf1/0x1f0 [jbd2]
[32031.766934]  jbd2_journal_start+0x19/0x20 [jbd2]
[32031.767218]  flush_stashed_error_work+0x30/0x90 [ext4]
[32031.767487]  process_one_work+0x195/0x390
[32031.767747]  worker_thread+0x30/0x390
[32031.768007]  ? process_one_work+0x390/0x390
[32031.768265]  kthread+0x10d/0x130
[32031.768521]  ? kthread_flush_work_fn+0x10/0x10
[32031.768778]  ret_from_fork+0x35/0x40

static int start_this_handle(...)
    BUG_ON(journal->j_flags & JBD2_UNMOUNT); <---- Trigger this

Besides, after we enable fast commit, ext4_fc_replay can add work to
s_error_work but return success, so the latter journal destroy in
ext4_load_journal can trigger this problem too.

Fix this problem with two steps:
1. Call ext4_commit_super directly in ext4_handle_error for the case
   that called from ext4_fc_replay
2. Since it's hard to pair the init and flush for s_error_work, we'd
   better add a extras flush_work before journal destroy in
   ext4_fill_super

Besides, this patch will call ext4_commit_super in ext4_handle_error for
any nojournal case too. But it seems safe since the reason we call
schedule_work was that we should save error info to sb through journal
if available. Conversely, for the nojournal case, it seems useless delay
commit superblock to s_error_work.

Fixes: c92dc856848f ("ext4: defer saving error info from atomic context")
Fixes: 2d01ddc86606 ("ext4: save error info to sb through journal if available")
Cc: stable@kernel.org
Signed-off-by: yangerkun <yangerkun@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210924093917.1953239-1-yangerkun@huawei.com
9 months agoext4: fix loff_t overflow in ext4_max_bitmap_size()
Ritesh Harjani [Sat, 5 Jun 2021 05:09:32 +0000 (10:39 +0530)]
ext4: fix loff_t overflow in ext4_max_bitmap_size()

We should use unsigned long long rather than loff_t to avoid
overflow in ext4_max_bitmap_size() for comparison before returning.
w/o this patch sbi->s_bitmap_maxbytes was becoming a negative
value due to overflow of upper_limit (with has_huge_files as true)

Below is a quick test to trigger it on a 64KB pagesize system.

sudo mkfs.ext4 -b 65536 -O ^has_extents,^64bit /dev/loop2
sudo mount /dev/loop2 /mnt
sudo echo "hello" > /mnt/hello  -> This will error out with
"echo: write error: File too large"

Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/594f409e2c543e90fd836b78188dfa5c575065ba.1622867594.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
9 months agoext4: fix reserved space counter leakage
Jeffle Xu [Mon, 23 Aug 2021 06:13:58 +0000 (14:13 +0800)]
ext4: fix reserved space counter leakage

When ext4_insert_delayed block receives and recovers from an error from
ext4_es_insert_delayed_block(), e.g., ENOMEM, it does not release the
space it has reserved for that block insertion as it should. One effect
of this bug is that s_dirtyclusters_counter is not decremented and
remains incorrectly elevated until the file system has been unmounted.
This can result in premature ENOSPC returns and apparent loss of free
space.

Another effect of this bug is that
/sys/fs/ext4/<dev>/delayed_allocation_blocks can remain non-zero even
after syncfs has been executed on the filesystem.

Besides, add check for s_dirtyclusters_counter when inode is going to be
evicted and freed. s_dirtyclusters_counter can still keep non-zero until
inode is written back in .evict_inode(), and thus the check is delayed
to .destroy_inode().

Fixes: 51865fda28e5 ("ext4: let ext4 maintain extent status tree")
Cc: stable@kernel.org
Suggested-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Eric Whitney <enwlinux@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210823061358.84473-1-jefflexu@linux.alibaba.com
9 months agoext4: limit the number of blocks in one ADD_RANGE TLV
Hou Tao [Fri, 20 Aug 2021 04:45:05 +0000 (12:45 +0800)]
ext4: limit the number of blocks in one ADD_RANGE TLV

Now EXT4_FC_TAG_ADD_RANGE uses ext4_extent to track the
newly-added blocks, but the limit on the max value of
ee_len field is ignored, and it can lead to BUG_ON as
shown below when running command "fallocate -l 128M file"
on a fast_commit-enabled fs:

  kernel BUG at fs/ext4/ext4_extents.h:199!
  invalid opcode: 0000 [#1] SMP PTI
  CPU: 3 PID: 624 Comm: fallocate Not tainted 5.14.0-rc6+ #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
  RIP: 0010:ext4_fc_write_inode_data+0x1f3/0x200
  Call Trace:
   ? ext4_fc_write_inode+0xf2/0x150
   ext4_fc_commit+0x93b/0xa00
   ? ext4_fallocate+0x1ad/0x10d0
   ext4_sync_file+0x157/0x340
   ? ext4_sync_file+0x157/0x340
   vfs_fsync_range+0x49/0x80
   do_fsync+0x3d/0x70
   __x64_sys_fsync+0x14/0x20
   do_syscall_64+0x3b/0xc0
   entry_SYSCALL_64_after_hwframe+0x44/0xae

Simply fixing it by limiting the number of blocks
in one EXT4_FC_TAG_ADD_RANGE TLV.

Fixes: aa75f4d3daae ("ext4: main fast-commit commit path")
Cc: stable@kernel.org
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20210820044505.474318-1-houtao1@huawei.com
9 months agoksmbd: missing check for NULL in convert_to_nt_pathname()
Dan Carpenter [Thu, 30 Sep 2021 12:24:56 +0000 (15:24 +0300)]
ksmbd: missing check for NULL in convert_to_nt_pathname()

The kmalloc() does not have a NULL check.  This code can be re-written
slightly cleaner to just use the kstrdup().

Fixes: 265fd1991c1d ("ksmbd: use LOOKUP_BENEATH to prevent the out of share access")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Acked-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
9 months agoMerge tag 'net-5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Linus Torvalds [Thu, 30 Sep 2021 21:28:05 +0000 (14:28 -0700)]
Merge tag 'net-5.15-rc4' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
 "Networking fixes, including fixes from mac80211, netfilter and bpf.

  Current release - regressions:

   - bpf, cgroup: assign cgroup in cgroup_sk_alloc when called from
     interrupt

   - mdio: revert mechanical patches which broke handling of optional
     resources

   - dev_addr_list: prevent address duplication

  Previous releases - regressions:

   - sctp: break out if skb_header_pointer returns NULL in sctp_rcv_ootb
     (NULL deref)

   - Revert "mac80211: do not use low data rates for data frames with no
     ack flag", fixing broadcast transmissions

   - mac80211: fix use-after-free in CCMP/GCMP RX

   - netfilter: include zone id in tuple hash again, minimize collisions

   - netfilter: nf_tables: unlink table before deleting it (race -> UAF)

   - netfilter: log: work around missing softdep backend module

   - mptcp: don't return sockets in foreign netns

   - sched: flower: protect fl_walk() with rcu (race -> UAF)

   - ixgbe: fix NULL pointer dereference in ixgbe_xdp_setup

   - smsc95xx: fix stalled rx after link change

   - enetc: fix the incorrect clearing of IF_MODE bits

   - ipv4: fix rtnexthop len when RTA_FLOW is present

   - dsa: mv88e6xxx: 6161: use correct MAX MTU config method for this
     SKU

   - e100: fix length calculation & buffer overrun in ethtool::get_regs

  Previous releases - always broken:

   - mac80211: fix using stale frag_tail skb pointer in A-MSDU tx

   - mac80211: drop frames from invalid MAC address in ad-hoc mode

   - af_unix: fix races in sk_peer_pid and sk_peer_cred accesses (race
     -> UAF)

   - bpf, x86: Fix bpf mapping of atomic fetch implementation

   - bpf: handle return value of BPF_PROG_TYPE_STRUCT_OPS prog

   - netfilter: ip6_tables: zero-initialize fragment offset

   - mhi: fix error path in mhi_net_newlink

   - af_unix: return errno instead of NULL in unix_create1() when over
     the fs.file-max limit

  Misc:

   - bpf: exempt CAP_BPF from checks against bpf_jit_limit

   - netfilter: conntrack: make max chain length random, prevent
     guessing buckets by attackers

   - netfilter: nf_nat_masquerade: make async masq_inet6_event handling
     generic, defer conntrack walk to work queue (prevent hogging RTNL
     lock)"

* tag 'net-5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (77 commits)
  af_unix: fix races in sk_peer_pid and sk_peer_cred accesses
  net: stmmac: fix EEE init issue when paired with EEE capable PHYs
  net: dev_addr_list: handle first address in __hw_addr_add_ex
  net: sched: flower: protect fl_walk() with rcu
  net: introduce and use lock_sock_fast_nested()
  net: phy: bcm7xxx: Fixed indirect MMD operations
  net: hns3: disable firmware compatible features when uninstall PF
  net: hns3: fix always enable rx vlan filter problem after selftest
  net: hns3: PF enable promisc for VF when mac table is overflow
  net: hns3: fix show wrong state when add existing uc mac address
  net: hns3: fix mixed flag HCLGE_FLAG_MQPRIO_ENABLE and HCLGE_FLAG_DCB_ENABLE
  net: hns3: don't rollback when destroy mqprio fail
  net: hns3: remove tc enable checking
  net: hns3: do not allow call hns3_nic_net_open repeatedly
  ixgbe: Fix NULL pointer dereference in ixgbe_xdp_setup
  net: bridge: mcast: Associate the seqcount with its protecting lock.
  net: mdio-ipq4019: Fix the error for an optional regs resource
  net: hns3: fix hclge_dbg_dump_tm_pg() stack usage
  net: mdio: mscc-miim: Fix the mdio controller
  af_unix: Return errno instead of NULL in unix_create1().
  ...

9 months agoMerge tag 'gpio-fixes-for-v5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Thu, 30 Sep 2021 19:11:35 +0000 (12:11 -0700)]
Merge tag 'gpio-fixes-for-v5.15-rc4' of git://git./linux/kernel/git/brgl/linux

Pull gpio fixes from Bartosz Golaszewski:
 "A single fix for the gpio-pca953x driver and two commits updating the
  MAINTAINERS entries for Mun Yew Tham (GPIO specific) and myself
  (treewide after a change in professional situation).

  Summary:

   - don't ignore I2C errors in gpio-pca953x

   - update MAINTAINERS entries for Mun Yew Tham and myself"

* tag 'gpio-fixes-for-v5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  MAINTAINERS: Update Mun Yew Tham as Altera Pio Driver maintainer
  MAINTAINERS: update my email address
  gpio: pca953x: do not ignore i2c errors

9 months agoMerge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Linus Torvalds [Thu, 30 Sep 2021 19:00:46 +0000 (12:00 -0700)]
Merge tag 'for-linus' of git://git./linux/kernel/git/rdma/rdma

Pull rdma fixes from Jason Gunthorpe:
 "Not much too exciting here, although two syzkaller bugs that seem to
  have 9 lives may have finally been squashed.

  Several core bugs and a batch of driver bug fixes:

   - Fix compilation problems in qib and hfi1

   - Do not corrupt the joined multicast group state when using
     SEND_ONLY

   - Several CMA bugs, a reference leak for listening and two syzkaller
     crashers

   - Various bug fixes for irdma

   - Fix a Sleeping while atomic bug in usnic

   - Properly sanitize kernel pointers in dmesg

   - Two bugs in the 64b CQE support for hns"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/hns: Add the check of the CQE size of the user space
  RDMA/hns: Fix the size setting error when copying CQE in clean_cq()
  RDMA/hfi1: Fix kernel pointer leak
  RDMA/usnic: Lock VF with mutex instead of spinlock
  RDMA/hns: Work around broken constant propagation in gcc 8
  RDMA/cma: Ensure rdma_addr_cancel() happens before issuing more requests
  RDMA/cma: Do not change route.addr.src_addr.ss_family
  RDMA/irdma: Report correct WC error when there are MW bind errors
  RDMA/irdma: Report correct WC error when transport retry counter is exceeded
  RDMA/irdma: Validate number of CQ entries on create CQ
  RDMA/irdma: Skip CQP ring during a reset
  MAINTAINERS: Update Broadcom RDMA maintainers
  RDMA/cma: Fix listener leak in rdma_cma_listen_on_all() failure
  IB/cma: Do not send IGMP leaves for sendonly Multicast groups
  IB/qib: Fix clang confusion of NULL pointer comparison

9 months agoksmbd: fix transform header validation
Namjae Jeon [Wed, 29 Sep 2021 10:52:51 +0000 (19:52 +0900)]
ksmbd: fix transform header validation

Validate that the transform and smb request headers are present
before checking OriginalMessageSize and SessionId fields.

Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Ralph Böhme <slow@samba.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Tom Talpey <tom@talpey.com>
Acked-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
9 months agoksmbd: add buffer validation for SMB2_CREATE_CONTEXT
Hyunchul Lee [Fri, 24 Sep 2021 13:22:22 +0000 (22:22 +0900)]
ksmbd: add buffer validation for SMB2_CREATE_CONTEXT

Add buffer validation for SMB2_CREATE_CONTEXT.

Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
9 months agoksmbd: add validation in smb2 negotiate
Namjae Jeon [Wed, 29 Sep 2021 06:44:32 +0000 (15:44 +0900)]
ksmbd: add validation in smb2 negotiate

This patch add validation to check request buffer check in smb2
negotiate and fix null pointer deferencing oops in smb3_preauth_hash_rsp()
that found from manual test.

Cc: Tom Talpey <tom@talpey.com>
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Ralph Böhme <slow@samba.org>
Cc: Hyunchul Lee <hyc.lee@gmail.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Ralph Boehme <slow@samba.org>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
9 months agoksmbd: add request buffer validation in smb2_set_info
Namjae Jeon [Wed, 29 Sep 2021 06:41:48 +0000 (15:41 +0900)]
ksmbd: add request buffer validation in smb2_set_info

Add buffer validation in smb2_set_info, and remove unused variable
in set_file_basic_info. and smb2_set_info infolevel functions take
structure pointer argument.

Cc: Tom Talpey <tom@talpey.com>
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Ralph Böhme <slow@samba.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Hyunchul Lee <hyc.lee@gmail.com>
Reviewed-by: Ralph Boehme <slow@samba.org>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
9 months agoksmbd: use correct basic info level in set_file_basic_info()
Namjae Jeon [Wed, 29 Sep 2021 06:37:18 +0000 (15:37 +0900)]
ksmbd: use correct basic info level in set_file_basic_info()

Use correct basic info level in set/get_file_basic_info().

Reviewed-by: Ralph Boehme <slow@samba.org>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
9 months agoaf_unix: fix races in sk_peer_pid and sk_peer_cred accesses
Eric Dumazet [Wed, 29 Sep 2021 22:57:50 +0000 (15:57 -0700)]
af_unix: fix races in sk_peer_pid and sk_peer_cred accesses

Jann Horn reported that SO_PEERCRED and SO_PEERGROUPS implementations
are racy, as af_unix can concurrently change sk_peer_pid and sk_peer_cred.

In order to fix this issue, this patch adds a new spinlock that needs
to be used whenever these fields are read or written.

Jann also pointed out that l2cap_sock_get_peer_pid_cb() is currently
reading sk->sk_peer_pid which makes no sense, as this field
is only possibly set by AF_UNIX sockets.
We will have to clean this in a separate patch.
This could be done by reverting b48596d1dc25 "Bluetooth: L2CAP: Add get_peer_pid callback"
or implementing what was truly expected.

Fixes: 109f6e39fa07 ("af_unix: Allow SO_PEERCRED to work across namespaces.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Jann Horn <jannh@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 months agonet: stmmac: fix EEE init issue when paired with EEE capable PHYs
Wong Vee Khee [Thu, 30 Sep 2021 06:44:36 +0000 (14:44 +0800)]
net: stmmac: fix EEE init issue when paired with EEE capable PHYs

When STMMAC is paired with Energy-Efficient Ethernet(EEE) capable PHY,
and the PHY is advertising EEE by default, we need to enable EEE on the
xPCS side too, instead of having user to manually trigger the enabling
config via ethtool.

Fixed this by adding xpcs_config_eee() call in stmmac_eee_init().

Fixes: 7617af3d1a5e ("net: pcs: Introducing support for DWC xpcs Energy Efficient Ethernet")
Cc: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>
Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 months agonet: dev_addr_list: handle first address in __hw_addr_add_ex
Jakub Kicinski [Wed, 29 Sep 2021 15:32:24 +0000 (08:32 -0700)]
net: dev_addr_list: handle first address in __hw_addr_add_ex

struct dev_addr_list is used for device addresses, unicast addresses
and multicast addresses. The first of those needs special handling
of the main address - netdev->dev_addr points directly the data
of the entry and drivers write to it freely, so we can't maintain
it in the rbtree (for now, at least, to be fixed in net-next).

Current work around sprinkles special handling of the first
address on the list throughout the code but it missed the case
where address is being added. First address will not be visible
during subsequent adds.

Syzbot found a warning where unicast addresses are modified
without holding the rtnl lock, tl;dr is that team generates
the same modification multiple times, not necessarily when
right locks are held.

In the repro we have:

  macvlan -> team -> veth

macvlan adds a unicast address to the team. Team then pushes
that address down to its memebers (veths). Next something unrelated
makes team sync member addrs again, and because of the bug
the addr entries get duplicated in the veths. macvlan gets
removed, removes its addr from team which removes only one
of the duplicated addresses from veths. This removal is done
under rtnl. Next syzbot uses iptables to add a multicast addr
to team (which does not hold rtnl lock). Team syncs veth addrs,
but because veths' unicast list still has the duplicate it will
also get sync, even though this update is intended for mc addresses.
Again, uc address updates need rtnl lock, boom.

Reported-by: syzbot+7a2ab2cdc14d134de553@syzkaller.appspotmail.com
Fixes: 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs with IPv6 addresses, performance of changing link state, attaching a VRF, changing an IPv6 address, etc. go down dramtically.")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 months agonet: sched: flower: protect fl_walk() with rcu
Vlad Buslov [Wed, 29 Sep 2021 15:08:49 +0000 (18:08 +0300)]
net: sched: flower: protect fl_walk() with rcu

Patch that refactored fl_walk() to use idr_for_each_entry_continue_ul()
also removed rcu protection of individual filters which causes following
use-after-free when filter is deleted concurrently. Fix fl_walk() to obtain
rcu read lock while iterating and taking the filter reference and temporary
release the lock while calling arg->fn() callback that can sleep.

KASAN trace:

[  352.773640] ==================================================================
[  352.775041] BUG: KASAN: use-after-free in fl_walk+0x159/0x240 [cls_flower]
[  352.776304] Read of size 4 at addr ffff8881c8251480 by task tc/2987

[  352.777862] CPU: 3 PID: 2987 Comm: tc Not tainted 5.15.0-rc2+ #2
[  352.778980] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[  352.781022] Call Trace:
[  352.781573]  dump_stack_lvl+0x46/0x5a
[  352.782332]  print_address_description.constprop.0+0x1f/0x140
[  352.783400]  ? fl_walk+0x159/0x240 [cls_flower]
[  352.784292]  ? fl_walk+0x159/0x240 [cls_flower]
[  352.785138]  kasan_report.cold+0x83/0xdf
[  352.785851]  ? fl_walk+0x159/0x240 [cls_flower]
[  352.786587]  kasan_check_range+0x145/0x1a0
[  352.787337]  fl_walk+0x159/0x240 [cls_flower]
[  352.788163]  ? fl_put+0x10/0x10 [cls_flower]
[  352.789007]  ? __mutex_unlock_slowpath.constprop.0+0x220/0x220
[  352.790102]  tcf_chain_dump+0x231/0x450
[  352.790878]  ? tcf_chain_tp_delete_empty+0x170/0x170
[  352.791833]  ? __might_sleep+0x2e/0xc0
[  352.792594]  ? tfilter_notify+0x170/0x170
[  352.793400]  ? __mutex_unlock_slowpath.constprop.0+0x220/0x220
[  352.794477]  tc_dump_tfilter+0x385/0x4b0
[  352.795262]  ? tc_new_tfilter+0x1180/0x1180
[  352.796103]  ? __mod_node_page_state+0x1f/0xc0
[  352.796974]  ? __build_skb_around+0x10e/0x130
[  352.797826]  netlink_dump+0x2c0/0x560
[  352.798563]  ? netlink_getsockopt+0x430/0x430
[  352.799433]  ? __mutex_unlock_slowpath.constprop.0+0x220/0x220
[  352.800542]  __netlink_dump_start+0x356/0x440
[  352.801397]  rtnetlink_rcv_msg+0x3ff/0x550
[  352.802190]  ? tc_new_tfilter+0x1180/0x1180
[  352.802872]  ? rtnl_calcit.isra.0+0x1f0/0x1f0
[  352.803668]  ? tc_new_tfilter+0x1180/0x1180
[  352.804344]  ? _copy_from_iter_nocache+0x800/0x800
[  352.805202]  ? kasan_set_track+0x1c/0x30
[  352.805900]  netlink_rcv_skb+0xc6/0x1f0
[  352.806587]  ? rht_deferred_worker+0x6b0/0x6b0
[  352.807455]  ? rtnl_calcit.isra.0+0x1f0/0x1f0
[  352.808324]  ? netlink_ack+0x4d0/0x4d0
[  352.809086]  ? netlink_deliver_tap+0x62/0x3d0
[  352.809951]  netlink_unicast+0x353/0x480
[  352.810744]  ? netlink_attachskb+0x430/0x430
[  352.811586]  ? __alloc_skb+0xd7/0x200
[  352.812349]  netlink_sendmsg+0x396/0x680
[  352.813132]  ? netlink_unicast+0x480/0x480
[  352.813952]  ? __import_iovec+0x192/0x210
[  352.814759]  ? netlink_unicast+0x480/0x480
[  352.815580]  sock_sendmsg+0x6c/0x80
[  352.816299]  ____sys_sendmsg+0x3a5/0x3c0
[  352.817096]  ? kernel_sendmsg+0x30/0x30
[  352.817873]  ? __ia32_sys_recvmmsg+0x150/0x150
[  352.818753]  ___sys_sendmsg+0xd8/0x140
[  352.819518]  ? sendmsg_copy_msghdr+0x110/0x110
[  352.820402]  ? ___sys_recvmsg+0xf4/0x1a0
[  352.821110]  ? __copy_msghdr_from_user+0x260/0x260
[  352.821934]  ? _raw_spin_lock+0x81/0xd0
[  352.822680]  ? __handle_mm_fault+0xef3/0x1b20
[  352.823549]  ? rb_insert_color+0x2a/0x270
[  352.824373]  ? copy_page_range+0x16b0/0x16b0
[  352.825209]  ? perf_event_update_userpage+0x2d0/0x2d0
[  352.826190]  ? __fget_light+0xd9/0xf0
[  352.826941]  __sys_sendmsg+0xb3/0x130
[  352.827613]  ? __sys_sendmsg_sock+0x20/0x20
[  352.828377]  ? do_user_addr_fault+0x2c5/0x8a0
[  352.829184]  ? fpregs_assert_state_consistent+0x52/0x60
[  352.830001]  ? exit_to_user_mode_prepare+0x32/0x160
[  352.830845]  do_syscall_64+0x35/0x80
[  352.831445]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[  352.832331] RIP: 0033:0x7f7bee973c17
[  352.833078] Code: 0c 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10
[  352.836202] RSP: 002b:00007ffcbb368e28 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[  352.837524] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f7bee973c17
[  352.838715] RDX: 0000000000000000 RSI: 00007ffcbb368e50 RDI: 0000000000000003
[  352.839838] RBP: 00007ffcbb36d090 R08: 00000000cea96d79 R09: 00007f7beea34a40
[  352.841021] R10: 00000000004059bb R11: 0000000000000246 R12: 000000000046563f
[  352.842208] R13: 0000000000000000 R14: 0000000000000000 R15: 00007ffcbb36d088

[  352.843784] Allocated by task 2960:
[  352.844451]  kasan_save_stack+0x1b/0x40
[  352.845173]  __kasan_kmalloc+0x7c/0x90
[  352.845873]  fl_change+0x282/0x22db [cls_flower]
[  352.846696]  tc_new_tfilter+0x6cf/0x1180
[  352.847493]  rtnetlink_rcv_msg+0x471/0x550
[  352.848323]  netlink_rcv_skb+0xc6/0x1f0
[  352.849097]  netlink_unicast+0x353/0x480
[  352.849886]  netlink_sendmsg+0x396/0x680
[  352.850678]  sock_sendmsg+0x6c/0x80
[  352.851398]  ____sys_sendmsg+0x3a5/0x3c0
[  352.852202]  ___sys_sendmsg+0xd8/0x140
[  352.852967]  __sys_sendmsg+0xb3/0x130
[  352.853718]  do_syscall_64+0x35/0x80
[  352.854457]  entry_SYSCALL_64_after_hwframe+0x44/0xae

[  352.855830] Freed by task 7:
[  352.856421]  kasan_save_stack+0x1b/0x40
[  352.857139]  kasan_set_track+0x1c/0x30
[  352.857854]  kasan_set_free_info+0x20/0x30
[  352.858609]  __kasan_slab_free+0xed/0x130
[  352.859348]  kfree+0xa7/0x3c0
[  352.859951]  process_one_work+0x44d/0x780
[  352.860685]  worker_thread+0x2e2/0x7e0
[  352.861390]  kthread+0x1f4/0x220
[  352.862022]  ret_from_fork+0x1f/0x30

[  352.862955] Last potentially related work creation:
[  352.863758]  kasan_save_stack+0x1b/0x40
[  352.864378]  kasan_record_aux_stack+0xab/0xc0
[  352.865028]  insert_work+0x30/0x160
[  352.865617]  __queue_work+0x351/0x670
[  352.866261]  rcu_work_rcufn+0x30/0x40
[  352.866917]  rcu_core+0x3b2/0xdb0
[  352.867561]  __do_softirq+0xf6/0x386

[  352.868708] Second to last potentially related work creation:
[  352.869779]  kasan_save_stack+0x1b/0x40
[  352.870560]  kasan_record_aux_stack+0xab/0xc0
[  352.871426]  call_rcu+0x5f/0x5c0
[  352.872108]  queue_rcu_work+0x44/0x50
[  352.872855]  __fl_put+0x17c/0x240 [cls_flower]
[  352.873733]  fl_delete+0xc7/0x100 [cls_flower]
[  352.874607]  tc_del_tfilter+0x510/0xb30
[  352.886085]  rtnetlink_rcv_msg+0x471/0x550
[  352.886875]  netlink_rcv_skb+0xc6/0x1f0
[  352.887636]  netlink_unicast+0x353/0x480
[  352.888285]  netlink_sendmsg+0x396/0x680
[  352.888942]  sock_sendmsg+0x6c/0x80
[  352.889583]  ____sys_sendmsg+0x3a5/0x3c0
[  352.890311]  ___sys_sendmsg+0xd8/0x140
[  352.891019]  __sys_sendmsg+0xb3/0x130
[  352.891716]  do_syscall_64+0x35/0x80
[  352.892395]  entry_SYSCALL_64_after_hwframe+0x44/0xae

[  352.893666] The buggy address belongs to the object at ffff8881c8251000
                which belongs to the cache kmalloc-2k of size 2048
[  352.895696] The buggy address is located 1152 bytes inside of
                2048-byte region [ffff8881c8251000ffff8881c8251800)
[  352.897640] The buggy address belongs to the page:
[  352.898492] page:00000000213bac35 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1c8250
[  352.900110] head:00000000213bac35 order:3 compound_mapcount:0 compound_pincount:0
[  352.901541] flags: 0x2ffff800010200(slab|head|node=0|zone=2|lastcpupid=0x1ffff)
[  352.902908] raw: 002ffff800010200 0000000000000000 dead000000000122 ffff888100042f00
[  352.904391] raw: 0000000000000000 0000000000080008 00000001ffffffff 0000000000000000
[  352.905861] page dumped because: kasan: bad access detected

[  352.907323] Memory state around the buggy address:
[  352.908218]  ffff8881c8251380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  352.909471]  ffff8881c8251400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  352.910735] >ffff8881c8251480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  352.912012]                    ^
[  352.912642]  ffff8881c8251500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  352.913919]  ffff8881c8251580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  352.915185] ==================================================================

Fixes: d39d714969cd ("idr: introduce idr_for_each_entry_continue_ul()")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Acked-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 months agonet: introduce and use lock_sock_fast_nested()
Paolo Abeni [Wed, 29 Sep 2021 09:59:17 +0000 (11:59 +0200)]
net: introduce and use lock_sock_fast_nested()

Syzkaller reported a false positive deadlock involving
the nl socket lock and the subflow socket lock:

MPTCP: kernel_bind error, err=-98
============================================
WARNING: possible recursive locking detected
5.15.0-rc1-syzkaller #0 Not tainted
--------------------------------------------
syz-executor998/6520 is trying to acquire lock:
ffff8880795718a0 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_close+0x267/0x7b0 net/mptcp/protocol.c:2738

but task is already holding lock:
ffff8880787c8c60 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1612 [inline]
ffff8880787c8c60 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_close+0x23/0x7b0 net/mptcp/protocol.c:2720

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(k-sk_lock-AF_INET);
  lock(k-sk_lock-AF_INET);

 *** DEADLOCK ***

 May be due to missing lock nesting notation

3 locks held by syz-executor998/6520:
 #0: ffffffff8d176c50 (cb_lock){++++}-{3:3}, at: genl_rcv+0x15/0x40 net/netlink/genetlink.c:802
 #1: ffffffff8d176d08 (genl_mutex){+.+.}-{3:3}, at: genl_lock net/netlink/genetlink.c:33 [inline]
 #1: ffffffff8d176d08 (genl_mutex){+.+.}-{3:3}, at: genl_rcv_msg+0x3e0/0x580 net/netlink/genetlink.c:790
 #2: ffff8880787c8c60 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1612 [inline]
 #2: ffff8880787c8c60 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_close+0x23/0x7b0 net/mptcp/protocol.c:2720

stack backtrace:
CPU: 1 PID: 6520 Comm: syz-executor998 Not tainted 5.15.0-rc1-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
 print_deadlock_bug kernel/locking/lockdep.c:2944 [inline]
 check_deadlock kernel/locking/lockdep.c:2987 [inline]
 validate_chain kernel/locking/lockdep.c:3776 [inline]
 __lock_acquire.cold+0x149/0x3ab kernel/locking/lockdep.c:5015
 lock_acquire kernel/locking/lockdep.c:5625 [inline]
 lock_acquire+0x1ab/0x510 kernel/locking/lockdep.c:5590
 lock_sock_fast+0x36/0x100 net/core/sock.c:3229
 mptcp_close+0x267/0x7b0 net/mptcp/protocol.c:2738
 inet_release+0x12e/0x280 net/ipv4/af_inet.c:431
 __sock_release net/socket.c:649 [inline]
 sock_release+0x87/0x1b0 net/socket.c:677
 mptcp_pm_nl_create_listen_socket+0x238/0x2c0 net/mptcp/pm_netlink.c:900
 mptcp_nl_cmd_add_addr+0x359/0x930 net/mptcp/pm_netlink.c:1170
 genl_family_rcv_msg_doit+0x228/0x320 net/netlink/genetlink.c:731
 genl_family_rcv_msg net/netlink/genetlink.c:775 [inline]
 genl_rcv_msg+0x328/0x580 net/netlink/genetlink.c:792
 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2504
 genl_rcv+0x24/0x40 net/netlink/genetlink.c:803
 netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline]
 netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1340
 netlink_sendmsg+0x86d/0xdb0 net/netlink/af_netlink.c:1929
 sock_sendmsg_nosec net/socket.c:704 [inline]
 sock_sendmsg+0xcf/0x120 net/socket.c:724
 sock_no_sendpage+0x101/0x150 net/core/sock.c:2980
 kernel_sendpage.part.0+0x1a0/0x340 net/socket.c:3504
 kernel_sendpage net/socket.c:3501 [inline]
 sock_sendpage+0xe5/0x140 net/socket.c:1003
 pipe_to_sendpage+0x2ad/0x380 fs/splice.c:364
 splice_from_pipe_feed fs/splice.c:418 [inline]
 __splice_from_pipe+0x43e/0x8a0 fs/splice.c:562
 splice_from_pipe fs/splice.c:597 [inline]
 generic_splice_sendpage+0xd4/0x140 fs/splice.c:746
 do_splice_from fs/splice.c:767 [inline]
 direct_splice_actor+0x110/0x180 fs/splice.c:936
 splice_direct_to_actor+0x34b/0x8c0 fs/splice.c:891
 do_splice_direct+0x1b3/0x280 fs/splice.c:979
 do_sendfile+0xae9/0x1240 fs/read_write.c:1249
 __do_sys_sendfile64 fs/read_write.c:1314 [inline]
 __se_sys_sendfile64 fs/read_write.c:1300 [inline]
 __x64_sys_sendfile64+0x1cc/0x210 fs/read_write.c:1300
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f215cb69969
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 14 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffc96bb3868 EFLAGS: 00000246 ORIG_RAX: 0000000000000028
RAX: ffffffffffffffda RBX: 00007f215cbad072 RCX: 00007f215cb69969
RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000005
RBP: 0000000000000000 R08: 00007ffc96bb3a08 R09: 00007ffc96bb3a08
R10: 0000000100000002 R11: 0000000000000246 R12: 00007ffc96bb387c
R13: 431bde82d7b634db R14: 0000000000000000 R15: 0000000000000000

the problem originates from uncorrect lock annotation in the mptcp
code and is only visible since commit 2dcb96bacce3 ("net: core: Correct
the sock::sk_lock.owned lockdep annotations"), but is present since
the port-based endpoint support initial implementation.

This patch addresses the issue introducing a nested variant of
lock_sock_fast() and using it in the relevant code path.

Fixes: 1729cf186d8a ("mptcp: create the listening socket for new port")
Fixes: 2dcb96bacce3 ("net: core: Correct the sock::sk_lock.owned lockdep annotations")
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Reported-and-tested-by: syzbot+1dd53f7a89b299d59eaf@syzkaller.appspotmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 months agoKVM: selftests: Ensure all migrations are performed when test is affined
Sean Christopherson [Wed, 29 Sep 2021 23:41:12 +0000 (16:41 -0700)]
KVM: selftests: Ensure all migrations are performed when test is affined

Rework the CPU selection in the migration worker to ensure the specified
number of migrations are performed when the test iteslf is affined to a
subset of CPUs.  The existing logic skips iterations if the target CPU is
not in the original set of possible CPUs, which causes the test to fail
if too many iterations are skipped.

  ==== Test Assertion Failure ====
  rseq_test.c:228: i > (NR_TASK_MIGRATIONS / 2)
  pid=10127 tid=10127 errno=4 - Interrupted system call
     1  0x00000000004018e5: main at rseq_test.c:227
     2  0x00007fcc8fc66bf6: ?? ??:0
     3  0x0000000000401959: _start at ??:?
  Only performed 4 KVM_RUNs, task stalled too much?

Calculate the min/max possible CPUs as a cheap "best effort" to avoid
high runtimes when the test is affined to a small percentage of CPUs.
Alternatively, a list or xarray of the possible CPUs could be used, but
even in a horrendously inefficient setup, such optimizations are not
needed because the runtime is completely dominated by the cost of
migrating the task, and the absolute runtime is well under a minute in
even truly absurd setups, e.g. running on a subset of vCPUs in a VM that
is heavily overcommited (16 vCPUs per pCPU).

Fixes: 61e52f1630f5 ("KVM: selftests: Add a test for KVM_RUN+rseq to detect task migration bugs")
Reported-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210929234112.1862848-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
9 months agoKVM: x86: Swap order of CPUID entry "index" vs. "significant flag" checks
Sean Christopherson [Wed, 29 Sep 2021 22:24:25 +0000 (15:24 -0700)]
KVM: x86: Swap order of CPUID entry "index" vs. "significant flag" checks

Check whether a CPUID entry's index is significant before checking for a
matching index to hack-a-fix an undefined behavior bug due to consuming
uninitialized data.  RESET/INIT emulation uses kvm_cpuid() to retrieve
CPUID.0x1, which does _not_ have a significant index, and fails to
initialize the dummy variable that doubles as EBX/ECX/EDX output _and_
ECX, a.k.a. index, input.

Practically speaking, it's _extremely_  unlikely any compiler will yield
code that causes problems, as the compiler would need to inline the
kvm_cpuid() call to detect the uninitialized data, and intentionally hose
the kernel, e.g. insert ud2, instead of simply ignoring the result of
the index comparison.

Although the sketchy "dummy" pattern was introduced in SVM by commit
66f7b72e1171 ("KVM: x86: Make register state after reset conform to
specification"), it wasn't actually broken until commit 7ff6c0350315
("KVM: x86: Remove stateful CPUID handling") arbitrarily swapped the
order of operations such that "index" was checked before the significant
flag.

Avoid consuming uninitialized data by reverting to checking the flag
before the index purely so that the fix can be easily backported; the
offending RESET/INIT code has been refactored, moved, and consolidated
from vendor code to common x86 since the bug was introduced.  A future
patch will directly address the bad RESET/INIT behavior.

The undefined behavior was detected by syzbot + KernelMemorySanitizer.

  BUG: KMSAN: uninit-value in cpuid_entry2_find arch/x86/kvm/cpuid.c:68
  BUG: KMSAN: uninit-value in kvm_find_cpuid_entry arch/x86/kvm/cpuid.c:1103
  BUG: KMSAN: uninit-value in kvm_cpuid+0x456/0x28f0 arch/x86/kvm/cpuid.c:1183
   cpuid_entry2_find arch/x86/kvm/cpuid.c:68 [inline]
   kvm_find_cpuid_entry arch/x86/kvm/cpuid.c:1103 [inline]
   kvm_cpuid+0x456/0x28f0 arch/x86/kvm/cpuid.c:1183
   kvm_vcpu_reset+0x13fb/0x1c20 arch/x86/kvm/x86.c:10885
   kvm_apic_accept_events+0x58f/0x8c0 arch/x86/kvm/lapic.c:2923
   vcpu_enter_guest+0xfd2/0x6d80 arch/x86/kvm/x86.c:9534
   vcpu_run+0x7f5/0x18d0 arch/x86/kvm/x86.c:9788
   kvm_arch_vcpu_ioctl_run+0x245b/0x2d10 arch/x86/kvm/x86.c:10020

  Local variable ----dummy@kvm_vcpu_reset created at:
   kvm_vcpu_reset+0x1fb/0x1c20 arch/x86/kvm/x86.c:10812
   kvm_apic_accept_events+0x58f/0x8c0 arch/x86/kvm/lapic.c:2923

Reported-by: syzbot+f3985126b746b3d59c9d@syzkaller.appspotmail.com
Reported-by: Alexander Potapenko <glider@google.com>
Fixes: 2a24be79b6b7 ("KVM: VMX: Set EDX at INIT with CPUID.0x1, Family-Model-Stepping")
Fixes: 7ff6c0350315 ("KVM: x86: Remove stateful CPUID handling")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20210929222426.1855730-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
9 months agoptp: Fix ptp_kvm_getcrosststamp issue for x86 ptp_kvm
Zelin Deng [Wed, 29 Sep 2021 05:13:49 +0000 (13:13 +0800)]
ptp: Fix ptp_kvm_getcrosststamp issue for x86 ptp_kvm

hv_clock is preallocated to have only HVC_BOOT_ARRAY_SIZE (64) elements;
if the PTP_SYS_OFFSET_PRECISE ioctl is executed on vCPUs whose index is
64 of higher, retrieving the struct pvclock_vcpu_time_info pointer with
"src = &hv_clock[cpu].pvti" will result in an out-of-bounds access and
a wild pointer.  Change it to "this_cpu_pvti()" which is guaranteed to
be valid.

Fixes: 95a3d4454bb1 ("Switch kvmclock data to a PER_CPU variable")
Signed-off-by: Zelin Deng <zelin.deng@linux.alibaba.com>
Cc: <stable@vger.kernel.org>
Message-Id: <1632892429-101194-3-git-send-email-zelin.deng@linux.alibaba.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
9 months agox86/kvmclock: Move this_cpu_pvti into kvmclock.h
Zelin Deng [Wed, 29 Sep 2021 05:13:48 +0000 (13:13 +0800)]
x86/kvmclock: Move this_cpu_pvti into kvmclock.h

There're other modules might use hv_clock_per_cpu variable like ptp_kvm,
so move it into kvmclock.h and export the symbol to make it visiable to
other modules.

Signed-off-by: Zelin Deng <zelin.deng@linux.alibaba.com>
Cc: <stable@vger.kernel.org>
Message-Id: <1632892429-101194-2-git-send-email-zelin.deng@linux.alibaba.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
9 months agonbd: use shifts rather than multiplies
Nick Desaulniers [Mon, 20 Sep 2021 23:25:33 +0000 (16:25 -0700)]
nbd: use shifts rather than multiplies

commit fad7cd3310db ("nbd: add the check to prevent overflow in
__nbd_ioctl()") raised an issue from the fallback helpers added in
commit f0907827a8a9 ("compiler.h: enable builtin overflow checkers and
add fallback code")

ERROR: modpost: "__divdi3" [drivers/block/nbd.ko] undefined!

As Stephen Rothwell notes:
  The added check_mul_overflow() call is being passed 64 bit values.
  COMPILER_HAS_GENERIC_BUILTIN_OVERFLOW is not set for this build (see
  include/linux/overflow.h).

Specifically, the helpers for checking whether the results of a
multiplication overflowed (__unsigned_mul_overflow,
__signed_add_overflow) use the division operator when
!COMPILER_HAS_GENERIC_BUILTIN_OVERFLOW.  This is problematic for 64b
operands on 32b hosts.

This was fixed upstream by
commit 76ae847497bc ("Documentation: raise minimum supported version of
GCC to 5.1")
which is not suitable to be backported to stable.

Further, __builtin_mul_overflow() would emit a libcall to a
compiler-rt-only symbol when compiling with clang < 14 for 32b targets.

ld.lld: error: undefined symbol: __mulodi4

In order to keep stable buildable with GCC 4.9 and clang < 14, modify
struct nbd_config to instead track the number of bits of the block size;
reconstructing the block size using runtime checked shifts that are not
problematic for those compilers and in a ways that can be backported to
stable.

In nbd_set_size, we do validate that the value of blksize must be a
power of two (POT) and is in the range of [512, PAGE_SIZE] (both
inclusive).

This does modify the debugfs interface.

Cc: stable@vger.kernel.org
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Link: https://github.com/ClangBuiltLinux/linux/issues/1438
Link: https://lore.kernel.org/all/20210909182525.372ee687@canb.auug.org.au/
Link: https://lore.kernel.org/stable/CAHk-=whiQBofgis_rkniz8GBP9wZtSZdcDEffgSLO62BUGV3gg@mail.gmail.com/
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Suggested-by: Kees Cook <keescook@chromium.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Suggested-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/20210920232533.4092046-1-ndesaulniers@google.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
9 months agoksmbd: remove NTLMv1 authentication
Namjae Jeon [Mon, 27 Sep 2021 12:47:48 +0000 (21:47 +0900)]
ksmbd: remove NTLMv1 authentication

Remove insecure NTLMv1 authentication.

Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Ralph Böhme <slow@samba.org>
Reviewed-by: Tom Talpey <tom@talpey.com>
Acked-by: Steve French <smfrench@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
9 months agoMAINTAINERS: Update Mun Yew Tham as Altera Pio Driver maintainer
Mun Yew Tham [Wed, 29 Sep 2021 00:49:11 +0000 (08:49 +0800)]
MAINTAINERS: Update Mun Yew Tham as Altera Pio Driver maintainer

Update Altera Pio Driver maintainer's email from <joyce.ooi@intel.com> to <mun.yew.tham@intel.com>

Signed-off-by: Mun Yew Tham <mun.yew.tham@intel.com>
Acked-by: Joyce Ooi <joyce.ooi@intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
9 months agoMAINTAINERS: update my email address
Bartosz Golaszewski [Mon, 20 Sep 2021 07:18:37 +0000 (09:18 +0200)]
MAINTAINERS: update my email address

My professional situation changes soon. Update my email address.

Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
9 months agogpio: pca953x: do not ignore i2c errors
Andrey Gusakov [Thu, 23 Sep 2021 17:22:16 +0000 (20:22 +0300)]
gpio: pca953x: do not ignore i2c errors

Per gpio_chip interface, error shall be proparated to the caller.

Attempt to silent diagnostics by returning zero (as written in the
comment) is plain wrong, because the zero return can be interpreted by
the caller as the gpio value.

Cc: stable@vger.kernel.org
Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com>
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
9 months agoMerge tag 'sound-5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai...
Linus Torvalds [Wed, 29 Sep 2021 14:48:00 +0000 (07:48 -0700)]
Merge tag 'sound-5.15-rc4' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "This became a slightly large collection of changes, partly because
  I've been off in the last weeks. Most of changes are small and
  scattered while a bit big change is found in HD-audio Realtek codec
  driver; it's a very device-specific fix that has been long wanted, so
  I decided to pick up although it's in the middle RC.

  Some highlights:

   - A new guard ioctl for ALSA rawmidi API to avoid the misuse of the
     new timestamp framing mode; it's for a regression fix

   - HD-audio: a revert of the 5.15 change that might work badly, new
     quirks for Lenovo Legion & co, a follow-up fix for CS8409

   - ASoC: lots of SOF-related fixes, fsl component fixes, corrections
     of mediatek drivers

   - USB-audio: fix for the PM resume

   - FireWire: oxfw and motu fixes"

* tag 'sound-5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (25 commits)
  ALSA: pcsp: Make hrtimer forwarding more robust
  ALSA: rawmidi: introduce SNDRV_RAWMIDI_IOCTL_USER_PVERSION
  ALSA: firewire-motu: fix truncated bytes in message tracepoints
  ASoC: SOF: trace: Omit error print when waking up trace sleepers
  ASoC: mediatek: mt8195: remove wrong fixup assignment on HDMITX
  ASoC: SOF: loader: Re-phrase the missing firmware error to avoid duplication
  ASoC: SOF: loader: release_firmware() on load failure to avoid batching
  ALSA: hda/cs8409: Setup Dolphin Headset Mic as Phantom Jack
  ALSA: pcxhr: "fix" PCXHR_REG_TO_PORT definition
  ASoC: SOF: imx: imx8m: Bar index is only valid for IRAM and SRAM types
  ASoC: SOF: imx: imx8: Bar index is only valid for IRAM and SRAM types
  ASoC: SOF: Fix DSP oops stack dump output contents
  ALSA: hda/realtek: Quirks to enable speaker output for Lenovo Legion 7i 15IMHG05, Yoga 7i 14ITL5/15ITL5, and 13s Gen2 laptops.
  ALSA: usb-audio: Unify mixer resume and reset_resume procedure
  Revert "ALSA: hda: Drop workaround for a hang at shutdown again"
  ALSA: oxfw: fix transmission method for Loud models based on OXFW971
  ASoC: mediatek: common: handle NULL case in suspend/resume function
  ASoC: fsl_xcvr: register platform component before registering cpu dai
  ASoC: fsl_spdif: register platform component before registering cpu dai
  ASoC: fsl_micfil: register platform component before registering cpu dai
  ...

9 months agoMerge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Linus Torvalds [Wed, 29 Sep 2021 14:37:46 +0000 (07:37 -0700)]
Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6

Pull crypto fixes from Herbert Xu:
 "This contains fixes for a resource leak in ccp as well as stack
  corruption in x86/sm4"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: x86/sm4 - Fix frame pointer stack corruption
  crypto: ccp - fix resource leaks in ccp_run_aes_gcm_cmd()

9 months agonet: phy: bcm7xxx: Fixed indirect MMD operations
Florian Fainelli [Tue, 28 Sep 2021 20:32:33 +0000 (13:32 -0700)]
net: phy: bcm7xxx: Fixed indirect MMD operations

When EEE support was added to the 28nm EPHY it was assumed that it would
be able to support the standard clause 45 over clause 22 register access
method. It turns out that the PHY does not support that, which is the
very reason for using the indirect shadow mode 2 bank 3 access method.

Implement {read,write}_mmd to allow the standard PHY library routines
pertaining to EEE querying and configuration to work correctly on these
PHYs. This forces us to implement a __phy_set_clr_bits() function that
does not grab the MDIO bus lock since the PHY driver's {read,write}_mmd
functions are always called with that lock held.

Fixes: 83ee102a6998 ("net: phy: bcm7xxx: add support for 28nm EPHY")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 months agoMerge branch 'hns3-fixes'
David S. Miller [Wed, 29 Sep 2021 10:03:54 +0000 (11:03 +0100)]
Merge branch 'hns3-fixes'

Guangbin Huang says:

====================
net: hns3: add some fixes for -net

This series adds some fixes for the HNS3 ethernet driver.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
9 months agonet: hns3: disable firmware compatible features when uninstall PF
Guangbin Huang [Wed, 29 Sep 2021 09:35:56 +0000 (17:35 +0800)]
net: hns3: disable firmware compatible features when uninstall PF

Currently, the firmware compatible features are enabled in PF driver
initialization process, but they are not disabled in PF driver
deinitialization process and firmware keeps these features in enabled
status.

In this case, if load an old PF driver (for example, in VM) which not
support the firmware compatible features, firmware will still send mailbox
message to PF when link status changed and PF will print
"un-supported mailbox message, code = 201".

To fix this problem, disable these firmware compatible features in PF
driver deinitialization process.

Fixes: ed8fb4b262ae ("net: hns3: add link change event report")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 months agonet: hns3: fix always enable rx vlan filter problem after selftest
Guangbin Huang [Wed, 29 Sep 2021 09:35:55 +0000 (17:35 +0800)]
net: hns3: fix always enable rx vlan filter problem after selftest

Currently, the rx vlan filter will always be disabled before selftest and
be enabled after selftest as the rx vlan filter feature is fixed on in
old device earlier than V3.

However, this feature is not fixed in some new devices and it can be
disabled by user. In this case, it is wrong if rx vlan filter is enabled
after selftest. So fix it.

Fixes: bcc26e8dc432 ("net: hns3: remove unused code in hns3_self_test()")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 months agonet: hns3: PF enable promisc for VF when mac table is overflow
Guangbin Huang [Wed, 29 Sep 2021 09:35:54 +0000 (17:35 +0800)]
net: hns3: PF enable promisc for VF when mac table is overflow

If unicast mac address table is full, and user add a new mac address, the
unicast promisc needs to be enabled for the new unicast mac address can be
used. So does the multicast promisc.

Now this feature has been implemented for PF, and VF should be implemented
too. When the mac table of VF is overflow, PF will enable promisc for this
VF.

Fixes: 1e6e76101fd9 ("net: hns3: configure promisc mode for VF asynchronously")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 months agonet: hns3: fix show wrong state when add existing uc mac address
Jian Shen [Wed, 29 Sep 2021 09:35:53 +0000 (17:35 +0800)]
net: hns3: fix show wrong state when add existing uc mac address

Currently, if function adds an existing unicast mac address, eventhough
driver will not add this address into hardware, but it will return 0 in
function hclge_add_uc_addr_common(). It will cause the state of this
unicast mac address is ACTIVE in driver, but it should be in TO-ADD state.

To fix this problem, function hclge_add_uc_addr_common() returns -EEXIST
if mac address is existing, and delete two error log to avoid printing
them all the time after this modification.

Fixes: 72110b567479 ("net: hns3: return 0 and print warning when hit duplicate MAC")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 months agonet: hns3: fix mixed flag HCLGE_FLAG_MQPRIO_ENABLE and HCLGE_FLAG_DCB_ENABLE
Jian Shen [Wed, 29 Sep 2021 09:35:52 +0000 (17:35 +0800)]
net: hns3: fix mixed flag HCLGE_FLAG_MQPRIO_ENABLE and HCLGE_FLAG_DCB_ENABLE

HCLGE_FLAG_MQPRIO_ENABLE is supposed to set when enable
multiple TCs with tc mqprio, and HCLGE_FLAG_DCB_ENABLE is
supposed to set when enable multiple TCs with ets. But
the driver mixed the flags when updating the tm configuration.

Furtherly, PFC should be available when HCLGE_FLAG_MQPRIO_ENABLE
too, so remove the unnecessary limitation.

Fixes: 5a5c90917467 ("net: hns3: add support for tc mqprio offload")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 months agonet: hns3: don't rollback when destroy mqprio fail
Jian Shen [Wed, 29 Sep 2021 09:35:51 +0000 (17:35 +0800)]
net: hns3: don't rollback when destroy mqprio fail

For destroy mqprio is irreversible in stack, so it's unnecessary
to rollback the tc configuration when destroy mqprio failed.
Otherwise, it may cause the configuration being inconsistent
between driver and netstack.

As the failure is usually caused by reset, and the driver will
restore the configuration after reset, so it can keep the
configuration being consistent between driver and hardware.

Fixes: 5a5c90917467 ("net: hns3: add support for tc mqprio offload")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 months agonet: hns3: remove tc enable checking
Jian Shen [Wed, 29 Sep 2021 09:35:50 +0000 (17:35 +0800)]
net: hns3: remove tc enable checking

Currently, in function hns3_nic_set_real_num_queue(), the
driver doesn't report the queue count and offset for disabled
tc. If user enables multiple TCs, but only maps user
priorities to partial of them, it may cause the queue range
of the unmapped TC being displayed abnormally.

Fix it by removing the tc enable checking, ensure the queue
count is not zero.

With this change, the tc_en is useless now, so remove it.

Fixes: a75a8efa00c5 ("net: hns3: Fix tc setup when netdev is first up")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 months agonet: hns3: do not allow call hns3_nic_net_open repeatedly
Jian Shen [Wed, 29 Sep 2021 09:35:49 +0000 (17:35 +0800)]
net: hns3: do not allow call hns3_nic_net_open repeatedly

hns3_nic_net_open() is not allowed to called repeatly, but there
is no checking for this. When doing device reset and setup tc
concurrently, there is a small oppotunity to call hns3_nic_net_open
repeatedly, and cause kernel bug by calling napi_enable twice.

The calltrace information is like below:
[ 3078.222780] ------------[ cut here ]------------
[ 3078.230255] kernel BUG at net/core/dev.c:6991!
[ 3078.236224] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[ 3078.243431] Modules linked in: hns3 hclgevf hclge hnae3 vfio_iommu_type1 vfio_pci vfio_virqfd vfio pv680_mii(O)
[ 3078.258880] CPU: 0 PID: 295 Comm: kworker/u8:5 Tainted: G           O      5.14.0-rc4+ #1
[ 3078.269102] Hardware name:  , BIOS KpxxxFPGA 1P B600 V181 08/12/2021
[ 3078.276801] Workqueue: hclge hclge_service_task [hclge]
[ 3078.288774] pstate: 60400009 (nZCv daif +PAN -UAO -TCO BTYPE=--)
[ 3078.296168] pc : napi_enable+0x80/0x84
tc qdisc sho[w  3d0e7v8 .e3t0h218 79] lr : hns3_nic_net_open+0x138/0x510 [hns3]

[ 3078.314771] sp : ffff8000108abb20
[ 3078.319099] x29: ffff8000108abb20 x28: 0000000000000000 x27: ffff0820a8490300
[ 3078.329121] x26: 0000000000000001 x25: ffff08209cfc6200 x24: 0000000000000000
[ 3078.339044] x23: ffff0820a8490300 x22: ffff08209cd76000 x21: ffff0820abfe3880
[ 3078.349018] x20: 0000000000000000 x19: ffff08209cd76900 x18: 0000000000000000
[ 3078.358620] x17: 0000000000000000 x16: ffffc816e1727a50 x15: 0000ffff8f4ff930
[ 3078.368895] x14: 0000000000000000 x13: 0000000000000000 x12: 0000259e9dbeb6b4
[ 3078.377987] x11: 0096a8f7e764eb40 x10: 634615ad28d3eab5 x9 : ffffc816ad8885b8
[ 3078.387091] x8 : ffff08209cfc6fb8 x7 : ffff0820ac0da058 x6 : ffff0820a8490344
[ 3078.396356] x5 : 0000000000000140 x4 : 0000000000000003 x3 : ffff08209cd76938
[ 3078.405365] x2 : 0000000000000000 x1 : 0000000000000010 x0 : ffff0820abfe38a0
[ 3078.414657] Call trace:
[ 3078.418517]  napi_enable+0x80/0x84
[ 3078.424626]  hns3_reset_notify_up_enet+0x78/0xd0 [hns3]
[ 3078.433469]  hns3_reset_notify+0x64/0x80 [hns3]
[ 3078.441430]  hclge_notify_client+0x68/0xb0 [hclge]
[ 3078.450511]  hclge_reset_rebuild+0x524/0x884 [hclge]
[ 3078.458879]  hclge_reset_service_task+0x3c4/0x680 [hclge]
[ 3078.467470]  hclge_service_task+0xb0/0xb54 [hclge]
[ 3078.475675]  process_one_work+0x1dc/0x48c
[ 3078.481888]  worker_thread+0x15c/0x464
[ 3078.487104]  kthread+0x160/0x170
[ 3078.492479]  ret_from_fork+0x10/0x18
[ 3078.498785] Code: c8027c81 35ffffa2 d50323bf d65f03c0 (d4210000)
[ 3078.506889] ---[ end trace 8ebe0340a1b0fb44 ]---

Once hns3_nic_net_open() is excute success, the flag
HNS3_NIC_STATE_DOWN will be cleared. So add checking for this
flag, directly return when HNS3_NIC_STATE_DOWN is no set.

Fixes: e888402789b9 ("net: hns3: call hns3_nic_net_open() while doing HNAE3_UP_CLIENT")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 months agoixgbe: Fix NULL pointer dereference in ixgbe_xdp_setup
Feng Zhou [Tue, 28 Sep 2021 22:23:59 +0000 (15:23 -0700)]
ixgbe: Fix NULL pointer dereference in ixgbe_xdp_setup

The ixgbe driver currently generates a NULL pointer dereference with
some machine (online cpus < 63). This is due to the fact that the
maximum value of num_xdp_queues is nr_cpu_ids. Code is in
"ixgbe_set_rss_queues"".

Here's how the problem repeats itself:
Some machine (online cpus < 63), And user set num_queues to 63 through
ethtool. Code is in the "ixgbe_set_channels",
adapter->ring_feature[RING_F_FDIR].limit = count;

It becomes 63.

When user use xdp, "ixgbe_set_rss_queues" will set queues num.
adapter->num_rx_queues = rss_i;
adapter->num_tx_queues = rss_i;
adapter->num_xdp_queues = ixgbe_xdp_queues(adapter);

And rss_i's value is from
f = &adapter->ring_feature[RING_F_FDIR];
rss_i = f->indices = f->limit;

So "num_rx_queues" > "num_xdp_queues", when run to "ixgbe_xdp_setup",
for (i = 0; i < adapter->num_rx_queues; i++)
if (adapter->xdp_ring[i]->xsk_umem)

It leads to panic.

Call trace:
[exception RIP: ixgbe_xdp+368]
RIP: ffffffffc02a76a0  RSP: ffff9fe16202f8d0  RFLAGS: 00010297
RAX: 0000000000000000  RBX: 0000000000000020  RCX: 0000000000000000
RDX: 0000000000000000  RSI: 000000000000001c  RDI: ffffffffa94ead90
RBP: ffff92f8f24c0c18   R8: 0000000000000000   R9: 0000000000000000
R10: ffff9fe16202f830  R11: 0000000000000000  R12: ffff92f8f24c0000
R13: ffff9fe16202fc01  R14: 000000000000000a  R15: ffffffffc02a7530
ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
 7 [ffff9fe16202f8f0] dev_xdp_install at ffffffffa89fbbcc
 8 [ffff9fe16202f920] dev_change_xdp_fd at ffffffffa8a08808
 9 [ffff9fe16202f960] do_setlink at ffffffffa8a20235
10 [ffff9fe16202fa88] rtnl_setlink at ffffffffa8a20384
11 [ffff9fe16202fc78] rtnetlink_rcv_msg at ffffffffa8a1a8dd
12 [ffff9fe16202fcf0] netlink_rcv_skb at ffffffffa8a717eb
13 [ffff9fe16202fd40] netlink_unicast at ffffffffa8a70f88
14 [ffff9fe16202fd80] netlink_sendmsg at ffffffffa8a71319
15 [ffff9fe16202fdf0] sock_sendmsg at ffffffffa89df290
16 [ffff9fe16202fe08] __sys_sendto at ffffffffa89e19c8
17 [ffff9fe16202ff30] __x64_sys_sendto at ffffffffa89e1a64
18 [ffff9fe16202ff38] do_syscall_64 at ffffffffa84042b9
19 [ffff9fe16202ff50] entry_SYSCALL_64_after_hwframe at ffffffffa8c0008c

So I fix ixgbe_max_channels so that it will not allow a setting of queues
to be higher than the num_online_cpus(). And when run to ixgbe_xdp_setup,
take the smaller value of num_rx_queues and num_xdp_queues.

Fixes: 4a9b32f30f80 ("ixgbe: fix potential RX buffer starvation for AF_XDP")
Signed-off-by: Feng Zhou <zhoufeng.zf@bytedance.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
9 months agoscsi: csiostor: Add module softdep on cxgb4
Rahul Lakkireddy [Mon, 27 Sep 2021 16:14:08 +0000 (21:44 +0530)]
scsi: csiostor: Add module softdep on cxgb4

Both cxgb4 and csiostor drivers run on their own independent Physical
Function. But when cxgb4 and csiostor are both being loaded in parallel via
modprobe, there is a race when firmware upgrade is attempted by both the
drivers.

When the cxgb4 driver initiates the firmware upgrade, it halts the firmware
and the chip until upgrade is complete. When the csiostor driver is coming
up in parallel, the firmware mailbox communication fails with timeouts and
the csiostor driver probe fails.

Add a module soft dependency on cxgb4 driver to ensure loading csiostor
triggers cxgb4 to load first when available to avoid the firmware upgrade
race.

Link: https://lore.kernel.org/r/1632759248-15382-1-git-send-email-rahul.lakkireddy@chelsio.com
Fixes: a3667aaed569 ("[SCSI] csiostor: Chelsio FCoE offload driver")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
9 months agoscsi: qla2xxx: Fix excessive messages during device logout
Arun Easi [Sat, 25 Sep 2021 03:51:54 +0000 (20:51 -0700)]
scsi: qla2xxx: Fix excessive messages during device logout

Disable default logging of some I/O path messages. If desired, the messages
can be turned back on by setting ql2xextended_error_logging.

Link: https://lore.kernel.org/r/20210925035154.29815-1-njavali@marvell.com
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
9 months agoscsi: virtio_scsi: Fix spelling mistake "Unsupport" -> "Unsupported"
Colin Ian King [Fri, 24 Sep 2021 23:03:30 +0000 (00:03 +0100)]
scsi: virtio_scsi: Fix spelling mistake "Unsupport" -> "Unsupported"

There are a couple of spelling mistakes in pr_info and pr_err messages.
Fix them.

Link: https://lore.kernel.org/r/20210924230330.143785-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
9 months agoscsi: ses: Fix unsigned comparison with less than zero
Jiapeng Chong [Fri, 24 Sep 2021 09:51:53 +0000 (17:51 +0800)]
scsi: ses: Fix unsigned comparison with less than zero

Fix the following coccicheck warning:

./drivers/scsi/ses.c:137:10-16: WARNING: Unsigned expression compared
with zero: result > 0.

Link: https://lore.kernel.org/r/1632477113-90378-1-git-send-email-jiapeng.chong@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
9 months agoscsi: ufs: Fix illegal offset in UPIU event trace
Jonathan Hsu [Fri, 24 Sep 2021 08:58:48 +0000 (16:58 +0800)]
scsi: ufs: Fix illegal offset in UPIU event trace

Fix incorrect index for UTMRD reference in ufshcd_add_tm_upiu_trace().

Link: https://lore.kernel.org/r/20210924085848.25500-1-jonathan.hsu@mediatek.com
Fixes: 4b42d557a8ad ("scsi: ufs: core: Fix wrong Task Tag used in task management request UPIUs")
Cc: stable@vger.kernel.org
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jonathan Hsu <jonathan.hsu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
9 months agoksmbd: fix documentation for 2 functions
Enzo Matsumiya [Tue, 28 Sep 2021 22:56:34 +0000 (19:56 -0300)]
ksmbd: fix documentation for 2 functions

ksmbd_kthread_fn() and create_socket() returns 0 or error code, and not
task_struct/ERR_PTR.

Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>