muen/linux.git
2 years agoMerge tag 'renesas-dt-bindings-for-v4.20' of git://git.kernel.org/pub/scm/linux/kerne...
Arnd Bergmann [Fri, 28 Sep 2018 15:44:38 +0000 (17:44 +0200)]
Merge tag 'renesas-dt-bindings-for-v4.20' of git://git./linux/kernel/git/horms/renesas into next/dt

Renesas ARM Based SoC DT Bindings Updates for v4.20

* Document bindings for:
  - RZ/G2E (r8a774c0), RZ/G2M (r8a774a1) and RZ/A2 (r7s9210) SoCs
  - R-Car M3-N (r8a77965) SoC based ULCB board

* tag 'renesas-dt-bindings-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  dt-bindings: arm: Document RZ/G2E SoC DT bindings
  dt-bindings: arm: Document Renesas R-Car M3-N-based ULCB board
  dt-bindings: arm: Document RZ/A2 SoC DT bindings
  dt-bindings: arm: Document RZ/G2M SoC DT bindings

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2 years agoMerge tag 'renesas-arm-dt2-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel...
Arnd Bergmann [Fri, 28 Sep 2018 15:43:14 +0000 (17:43 +0200)]
Merge tag 'renesas-arm-dt2-for-v4.20' of git://git./linux/kernel/git/horms/renesas into next/dt

Second Round of Renesas ARM Based SoC DT Updates for v4.20

* RZ/G1M (r8a7743) based iWave G20D-Q7 board and camera daughter board
  - Move PCIe node out of common dtsi to allow reuse of the common dtsi
    on the iWave RZ/G1N board
* RZ/G1C (r8a77470) SoC: Add I2C4, SDHI2 and SMP support
* R-Car Gen1 based boards and R-Car Gen2 SoCs:
  - Enhance top-of-file comments to include SoC name
* RZ/N1D (r9a06g032) SoC:
  - Correct UART0 description and add all other UARTs

* tag 'renesas-arm-dt2-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: dts: iwg20d-q7-common: Move pciec node out of common dtsi
  ARM: dts: r8a77470: Add I2C4 support
  ARM: dts: r8a77470: Add SDHI2 support
  ARM: dts: r8a77470: Add SMP support
  ARM: dts: R-Car Gen1 board comment update
  ARM: dts: Include R-Car Gen2 product name in DTSI files
  ARM: dts: r9a06g032: Correct UART and add all other UARTs

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2 years agoMerge tag 'renesas-arm64-dt2-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel...
Arnd Bergmann [Fri, 28 Sep 2018 15:41:52 +0000 (17:41 +0200)]
Merge tag 'renesas-arm64-dt2-for-v4.20' of git://git./linux/kernel/git/horms/renesas into next/dt

Second Round of Renesas ARM64 Based SoC DT Updates for v4.20

* Remove unneeded status from thermal nodes

* R-Car Gen 3 SoCs:
  - Use 400kHz for I2C DVFS bus
  - Revise USB2.0 properties
* R-Car Gen 3 SoC based ULCB boards: Add default bootargs
* R-Car M3-N (r8a77965) SoC based boards: Enable audio with DMA

* R-Car V3M (r8a77970 and V3H (r8a77980) SoCs:
  - Add compare match timer (CMT) support
  - Add timer pulse unit (TPU) support
* R-Car V3H (r8a77980) and E3 (r8a77990) SoCs:
  - Attach the SYS-DMAC to the IPMMU
* E3 (r8a77990) SoC: Add display output support
* R-Car E3 (r8a77990) based Ebisu board:
  - Enable HDMI and CVBS input, and VGA and HDMI display output

* R-Car D3 (r8a77995) SoC: Add LVDS support
* R-Car D3 (r8a77995) based Draak board: Enable HDMI display output

* tag 'renesas-arm64-dt2-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  arm64: dts: renesas: r8a77965: Add Sound and Audio DMAC device nodes
  arm64: dts: renesas: r8a77995: draak: Enable HDMI display output
  arm64: dts: renesas: r8a77990: ebisu: Enable VGA and HDMI outputs
  arm64: dts: renesas: r8a77995: Add LVDS support
  arm64: dts: renesas: r8a77990: Add display output support
  arm64: dts: renesas: r8a779{7|8}0: add TPU support
  arm64: dts: renesas: revise properties for R-Car Gen3 SoCs' usb 2.0
  arm64: dts: renesas: ulcb: add default bootargs
  arm64: dts: renesas: r8a779{7|8}0: add CMT support
  arm64: dts: renesas: gen3: use 400kHz for I2C DVFS bus
  arm64: dts: renesas: r8a77980: Attach the SYS-DMAC to the IPMMU
  arm64: dts: renesas: r8a77990: Attach the SYS-DMAC to the IPMMU
  arm64: dts: renesas: ebisu: Add HDMI and CVBS input
  arm64: dts: renesas: Remove unneeded status from thermal nodes

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2 years agoMerge tag 'tegra-for-4.20-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel...
Arnd Bergmann [Fri, 28 Sep 2018 15:40:06 +0000 (17:40 +0200)]
Merge tag 'tegra-for-4.20-arm64-dt' of git://git./linux/kernel/git/tegra/linux into next/dt

arm64: tegra: Device tree changes for v4.20-rc1

This contains mostly device tree changes to support faster SDHCI modes
on Tegra210 and Tegra186.

* tag 'tegra-for-4.20-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  arm64: tegra: I2C on Tegra194 is not compatible with Tegra114
  arm64: dts: tegra186: Enable HS400
  arm64: dts: tegra210: Enable HS400
  arm64: dts: tegra186: Add SDMMC4 DQS trim value
  arm64: dts: tegra210: Add SDMMC4 DQS trim value
  arm64: dts: tegra186: Assign clocks for sdmmc1 and sdmmc4
  arm64: dts: tegra210: Assign clocks for sdmmc1 and sdmmc4
  arm64: dts: tegra186: Add SDHCI tap and trim values
  arm64: dts: tegra210: Add SDHCI tap and trim values
  arm64: dts: tegra186: Add sdmmc pad auto calibration offsets
  arm64: dts: tegra210: Add sdmmc pad auto calibration offsets
  arm64: dts: tegra210-p2597: Remove no-1-8-v from sdmmc1
  arm64: dts: tegra210-p2180: Correct sdmmc4 vqmmc-supply
  arm64: dts: tegra210-p2180: Allow ldo2 to go down to 1.8 V
  arm64: dts: Add Tegra186 sdmmc pinctrl voltage states
  arm64: dts: Add Tegra210 sdmmc pinctrl voltage states

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2 years agoMerge tag 'tegra-for-4.20-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git...
Arnd Bergmann [Fri, 28 Sep 2018 15:32:55 +0000 (17:32 +0200)]
Merge tag 'tegra-for-4.20-arm-dt' of git://git./linux/kernel/git/tegra/linux into next/dt

ARM: tegra: Device tree changes for v4.20-rc1

This contains a massive amount of changes from Marcel Ziswiler for
various boards by Toradex.

* tag 'tegra-for-4.20-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (129 commits)
  ARM: dts: paz00: fix wakeup gpio keycode
  ARM: tegra: tegra20: Fix mixed tabs-spaces indentation
  ARM: tegra: colibri_t20: add eval board device tree
  ARM: tegra: colibri_t20: rename ac97 label to tegra_ac97
  ARM: tegra: colibri_t20: get rid of fake clocks simple bus
  ARM: tegra: colibri_t20: rename tps6586x@34 and drop unused pmic label
  ARM: tegra: colibri_t20: iris: drop unused i2c_ddc label
  ARM: tegra: colibri_t20: rename i2c_ddc to hdmi_ddc
  ARM: tegra: colibri_t20: drop module level model and compatible
  ARM: tegra: colibri_t20: iris: add colibri ssp support
  ARM: tegra: colibri_t20: iris: simplify model and compatible properties
  ARM: tegra: colibri_t20: simplify model and compatible properties
  ARM: tegra: colibri_t20: add compatibility comment
  ARM: tegra: colibri_t20: annotate/move sd card detect
  ARM: tegra: colibri_t20: add gpio hogs for gmi_wr_n buffers
  ARM: tegra: colibri_t20: add gpio hog to unreset usb ethernet chip
  ARM: tegra: colibri_t20: add i2c-thermtrip
  ARM: tegra: colibri_t20: annotate/rename lm95245 temperature sensor
  ARM: tegra: colibri_t20: iris: add dr_mode property
  ARM: tegra: colibri_t20: iris: add gpio wakeup key
  ...

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2 years agoMerge tag 'tegra-for-4.20-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel...
Arnd Bergmann [Fri, 28 Sep 2018 15:31:14 +0000 (17:31 +0200)]
Merge tag 'tegra-for-4.20-dt-bindings' of git://git./linux/kernel/git/tegra/linux into next/dt

dt-bindings: Changes for v4.20-rc1

This contains the PMC pad configuration bindings which are used to
control the voltage of various pads found on Tegra chips. Among other
things this is required to enable faster modes on SDHCI.

* tag 'tegra-for-4.20-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  dt-bindings: Add Tegra PMC pad configuration bindings

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2 years agoMerge tag 'pxa-dt-4.20' of https://github.com/rjarzmik/linux into next/dt
Arnd Bergmann [Fri, 28 Sep 2018 11:02:04 +0000 (13:02 +0200)]
Merge tag 'pxa-dt-4.20' of https://github.com/rjarzmik/linux into next/dt

This device-tree pxa update brings :
 - a couple of changes for future pxa2xx platforms
  - 2 fixes in RTC and I2C domain

* tag 'pxa-dt-4.20' of https://github.com/rjarzmik/linux:
  ARM: dts: pxa: add pincontrol helpers
  ARM: dts: pxa: fix power i2c base address
  ARM: dts: pxa: fix the rtc controller
  ARM: dts: pxa: change serial node names

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2 years agoMerge tag 'amlogic-dt64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman...
Arnd Bergmann [Fri, 28 Sep 2018 10:48:09 +0000 (12:48 +0200)]
Merge tag 'amlogic-dt64-2' of git://git./linux/kernel/git/khilman/linux-amlogic into next/dt

Amlogic ARM64 DT updates for v4.20, round 2
- new SoC support: basic support for G12A family
- new board: Amlogic U200 board, using G12A SoC
- fix SPI bus warnings from new dtc updates

* tag 'amlogic-dt64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  arm64: dts: meson-g12a: add initial g12a s905d2 SoC DT support
  dt-bindings: arm: amlogic: Add Meson G12A binding
  arm64: dts: meson: Fix erroneous SPI bus warnings

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2 years agoMerge tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux...
Arnd Bergmann [Fri, 28 Sep 2018 10:45:56 +0000 (12:45 +0200)]
Merge tag 'amlogic-dt' of git://git./linux/kernel/git/khilman/linux-amlogic into next/dt

ARM: dts: Amlogic updates for v4.20
- fix clock controller register sizes
- new board: Endless Mini (EC-100) by Endless Mobile
- add voltage regulators

* tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  ARM: dts: meson8b: odroidc1: add stdout-path property
  ARM: dts: meson8b: odroidc1: enable the SAR ADC
  ARM: dts: meson8b: odroidc1: add the fixed voltage regulators
  ARM: dts: meson8b: odroidc1: add the CPU voltage regulator
  ARM: dts: meson8b: Add support for the Endless Mini (EC-100)
  ARM: dts: meson8b: add the RMII pins
  ARM: dts: meson8b: add the I2C_A, PWM_C and UART_B pins
  dt-bindings: arm: amlogic: Add the Endless Mobile Endless Mini (EC-100)
  dt-bindings: add vendor prefix for "Endless Mobile, Inc."
  ARM: dts: meson8b: fix the clock controller register size
  ARM: dts: meson8: fix the clock controller register size

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2 years agoMerge tag 'berlin64-dt-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git...
Arnd Bergmann [Fri, 28 Sep 2018 10:36:27 +0000 (12:36 +0200)]
Merge tag 'berlin64-dt-for-v4.20' of git://git./linux/kernel/git/jszhang/linux-berlin into next/dt

Berlin64 DT changes for v4.20

* tag 'berlin64-dt-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/jszhang/linux-berlin:
  arm64: dts: synaptics: add dtsi file for Synaptics AS370 SoC
  dt-bindings: arm: syna: add support for the AS370 SoC
  dt-bindings: arm: move berlin binding documentation to syna.txt

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2 years agoMerge tag 'realview-dts-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/linus...
Arnd Bergmann [Fri, 28 Sep 2018 10:35:20 +0000 (12:35 +0200)]
Merge tag 'realview-dts-v4.20' of git://git./linux/kernel/git/linusw/linux-integrator into next/dt

Realview DTS update for v4.20:
- One patch from Rob fixing SPI node names

* tag 'realview-dts-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
  ARM: dts: realview: Fix SPI controller node names

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2 years agoARM: dts: lpc32xx: Fix SPI controller node names
Rob Herring [Thu, 13 Sep 2018 18:12:33 +0000 (13:12 -0500)]
ARM: dts: lpc32xx: Fix SPI controller node names

SPI controller nodes should be named 'spi' rather than 'ssp'. Fixing the
name enables dtc SPI bus checks.

Cc: Vladimir Zapolskiy <vz@mleia.com>
Cc: Sylvain Lemieux <slemieux.tyco@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2 years agoarm64: dts: lg: Fix SPI controller node names
Rob Herring [Thu, 13 Sep 2018 18:12:44 +0000 (13:12 -0500)]
arm64: dts: lg: Fix SPI controller node names

SPI controller nodes should be named 'spi' rather than 'ssp'. Fixing the
name enables dtc SPI bus checks.

Cc: Chanho Min <chanho.min@lge.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2 years agoarm64: dts: amd: Fix SPI bus warnings
Rob Herring [Thu, 13 Sep 2018 18:12:40 +0000 (13:12 -0500)]
arm64: dts: amd: Fix SPI bus warnings

dtc has new checks for SPI buses. Fix the warnings in node names.

arch/arm64/boot/dts/amd/amd-overdrive.dtb: Warning (spi_bus_bridge): /smb/ssp@e1030000: node name for SPI buses should be 'spi'
arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dtb: Warning (spi_bus_bridge): /smb/ssp@e1030000: node name for SPI buses should be 'spi'
arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dtb: Warning (spi_bus_bridge): /smb/ssp@e1030000: node name for SPI buses should be 'spi'

Cc: Brijesh Singh <brijeshkumar.singh@amd.com>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2 years agoARM: dts: iwg20d-q7-common: Move pciec node out of common dtsi
Biju Das [Fri, 21 Sep 2018 14:07:55 +0000 (15:07 +0100)]
ARM: dts: iwg20d-q7-common: Move pciec node out of common dtsi

PCIe is not populated by default on iWave RZ/G1N board. RZ/G1N board
is almost identical to RZ/G1M. In order to reuse the common dtsi for
both the boards, it is required to move pcie node from common dtsi
to board specific dts.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2 years agoARM: dts: r8a77470: Add I2C4 support
Fabrizio Castro [Fri, 21 Sep 2018 17:37:01 +0000 (18:37 +0100)]
ARM: dts: r8a77470: Add I2C4 support

Add I2C4 support to RZ/G1C (a.k.a. r8a77470) SoC specific
device tree.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2 years agoARM: dts: r8a77470: Add SDHI2 support
Fabrizio Castro [Fri, 21 Sep 2018 11:55:10 +0000 (12:55 +0100)]
ARM: dts: r8a77470: Add SDHI2 support

Add SoC specific device tree definitions for the SDHI2 interface.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2 years agoARM: dts: r8a77470: Add SMP support
Fabrizio Castro [Mon, 17 Sep 2018 08:44:10 +0000 (09:44 +0100)]
ARM: dts: r8a77470: Add SMP support

Add DT node for the Advanced Power Management Unit (APMU), add the
second CPU core, and use "renesas,apmu" as "enable-method".

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2 years agoARM: dts: R-Car Gen1 board comment update
Magnus Damm [Mon, 17 Sep 2018 08:39:47 +0000 (17:39 +0900)]
ARM: dts: R-Car Gen1 board comment update

Include R-Car Gen1 product names for Bock-W and Marzen.

The product names are taken from:
Documentation/devicetree/bindings/arm/shmobile.txt

Signed-off-by: Magnus Damm <damm@opensource.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2 years agoARM: dts: Include R-Car Gen2 product name in DTSI files
Magnus Damm [Mon, 17 Sep 2018 08:39:39 +0000 (17:39 +0900)]
ARM: dts: Include R-Car Gen2 product name in DTSI files

Improve the user friendliness of the DTS code base by including the
R-Car product name in each R-Car Gen2 DTSI file.

The product names are taken from:
Documentation/devicetree/bindings/arm/shmobile.txt

Signed-off-by: Magnus Damm <damm@opensource.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2 years agoARM: dts: realview: Fix SPI controller node names
Rob Herring [Thu, 13 Sep 2018 18:12:26 +0000 (13:12 -0500)]
ARM: dts: realview: Fix SPI controller node names

SPI controller nodes should be named 'spi' rather than 'ssp'. Fixing the
name enables dtc SPI bus checks.

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2 years agoarm64: dts: synaptics: add dtsi file for Synaptics AS370 SoC
Jisheng Zhang [Fri, 13 Jul 2018 09:05:04 +0000 (17:05 +0800)]
arm64: dts: synaptics: add dtsi file for Synaptics AS370 SoC

Add initial dtsi file to support Synaptics AS370 SoC with quad
Cortex-A53 CPUs.

Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
2 years agodt-bindings: arm: syna: add support for the AS370 SoC
Jisheng Zhang [Fri, 13 Jul 2018 09:00:33 +0000 (17:00 +0800)]
dt-bindings: arm: syna: add support for the AS370 SoC

The AS370 SoC is a new derivative of the berlin family. However, the
SoC isn't named as berlin*.

Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Reviewed-by: Rob Herring <robh@kernel.org>
2 years agodt-bindings: arm: move berlin binding documentation to syna.txt
Jisheng Zhang [Fri, 13 Jul 2018 08:52:16 +0000 (16:52 +0800)]
dt-bindings: arm: move berlin binding documentation to syna.txt

Move berlin binding documentation as part of transition from Marvell
berlin to Synaptics SoC.

Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Acked-by: Rob Herring <robh@kernel.org>
2 years agoARM: dts: paz00: fix wakeup gpio keycode
Marc Dietrich [Thu, 2 Aug 2018 08:45:40 +0000 (10:45 +0200)]
ARM: dts: paz00: fix wakeup gpio keycode

The power key is controlled solely by the EC, which only tiggeres this
gpio after wakeup.
Fixes immediately return to suspend after wake from LP1.

Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoMerge tag 'zynq-dt-for-v4.20' of https://github.com/Xilinx/linux-xlnx into next/dt
Arnd Bergmann [Wed, 26 Sep 2018 15:07:57 +0000 (17:07 +0200)]
Merge tag 'zynq-dt-for-v4.20' of https://github.com/Xilinx/linux-xlnx into next/dt

ARM: dts: zynq: DT changes for v4.20

- Fix DTS spi/i2c warnings for zc702/zc770 boards

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2 years agoARM: tegra: tegra20: Fix mixed tabs-spaces indentation
Krzysztof Kozlowski [Thu, 30 Aug 2018 17:21:53 +0000 (19:21 +0200)]
ARM: tegra: tegra20: Fix mixed tabs-spaces indentation

Fix indentation and alignment when spaces were used instead of tabs.
This fixes checkpatch errors like:

    ERROR: code indent should use tabs where possible
    #306: FILE: arch/arm/boot/dts/tegra20-paz00.dts:306:
    +^I^I         <&tegra_car TEGRA20_CLK_PLL_P_OUT3>;$

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: colibri_t20: add eval board device tree
Marcel Ziswiler [Sun, 2 Sep 2018 10:09:06 +0000 (12:09 +0200)]
ARM: tegra: colibri_t20: add eval board device tree

Add an evaluation board device tree more in-line with all our other
device trees.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: colibri_t20: rename ac97 label to tegra_ac97
Marcel Ziswiler [Sun, 2 Sep 2018 10:09:05 +0000 (12:09 +0200)]
ARM: tegra: colibri_t20: rename ac97 label to tegra_ac97

Rename ac97 label to tegra_ac97 to be more in-line with the device tree
binding documentation.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: colibri_t20: get rid of fake clocks simple bus
Marcel Ziswiler [Sun, 2 Sep 2018 10:09:04 +0000 (12:09 +0200)]
ARM: tegra: colibri_t20: get rid of fake clocks simple bus

Get rid of the fake clocks simple bus and use node names as per the
actual schematics.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: colibri_t20: rename tps6586x@34 and drop unused pmic label
Marcel Ziswiler [Sun, 2 Sep 2018 10:09:03 +0000 (12:09 +0200)]
ARM: tegra: colibri_t20: rename tps6586x@34 and drop unused pmic label

Rename tps6586x@34 to pmic@34 and drop the unused pmic label.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: colibri_t20: iris: drop unused i2c_ddc label
Marcel Ziswiler [Sun, 2 Sep 2018 10:09:02 +0000 (12:09 +0200)]
ARM: tegra: colibri_t20: iris: drop unused i2c_ddc label

Drop unused i2c_ddc label.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: colibri_t20: rename i2c_ddc to hdmi_ddc
Marcel Ziswiler [Sun, 2 Sep 2018 10:09:01 +0000 (12:09 +0200)]
ARM: tegra: colibri_t20: rename i2c_ddc to hdmi_ddc

Rename i2c_ddc to hdmi_ddc to be more in-line with other device trees.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: colibri_t20: drop module level model and compatible
Marcel Ziswiler [Sun, 2 Sep 2018 10:09:00 +0000 (12:09 +0200)]
ARM: tegra: colibri_t20: drop module level model and compatible

Drop model and compatible nodes from the module level device tree as
they get overridden by the carrier board device tree anyway.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: colibri_t20: iris: add colibri ssp support
Marcel Ziswiler [Sun, 2 Sep 2018 10:08:59 +0000 (12:08 +0200)]
ARM: tegra: colibri_t20: iris: add colibri ssp support

Add Colibri SSP aka SPI support using the SPI4 instance.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: colibri_t20: iris: simplify model and compatible properties
Marcel Ziswiler [Sun, 2 Sep 2018 10:08:58 +0000 (12:08 +0200)]
ARM: tegra: colibri_t20: iris: simplify model and compatible properties

Simplify model and compatible by dropping the 256/512 MB from the model,
-512 from the compatible and rename that property from toradex,iris to
toradex,colibri_t20-iris to be more in-line with all our other device
trees.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: colibri_t20: simplify model and compatible properties
Marcel Ziswiler [Sun, 2 Sep 2018 10:08:57 +0000 (12:08 +0200)]
ARM: tegra: colibri_t20: simplify model and compatible properties

Simplify model and compatible by dropping the 256/512 MB from the model
and -512 from the compatible properties to be more in-line with all our
other device trees.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: colibri_t20: add compatibility comment
Marcel Ziswiler [Sun, 2 Sep 2018 10:08:56 +0000 (12:08 +0200)]
ARM: tegra: colibri_t20: add compatibility comment

Add compatibility comment.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: colibri_t20: annotate/move sd card detect
Marcel Ziswiler [Sun, 2 Sep 2018 10:08:55 +0000 (12:08 +0200)]
ARM: tegra: colibri_t20: annotate/move sd card detect

Annotate the SD card, its detect pin and move the SD card detect GPIO
definition from the module to the carrier board more in-line with our
other device trees.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: colibri_t20: add gpio hogs for gmi_wr_n buffers
Marcel Ziswiler [Sun, 2 Sep 2018 10:08:54 +0000 (12:08 +0200)]
ARM: tegra: colibri_t20: add gpio hogs for gmi_wr_n buffers

Add GPIO hogs for GMI_WR_N buffers:
- tri-stating GMI_WR_N on SODIMM pin 99 nPWE
- not tri-stating GMI_WR_N on SODIMM pin 93 RDnWR

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: colibri_t20: add gpio hog to unreset usb ethernet chip
Marcel Ziswiler [Sun, 2 Sep 2018 10:08:53 +0000 (12:08 +0200)]
ARM: tegra: colibri_t20: add gpio hog to unreset usb ethernet chip

Add GPIO hog to unreset ASIX AX88772B USB Ethernet chip.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: colibri_t20: add i2c-thermtrip
Marcel Ziswiler [Sun, 2 Sep 2018 10:08:52 +0000 (12:08 +0200)]
ARM: tegra: colibri_t20: add i2c-thermtrip

Add i2c-thermtrip which would set the SLEEP MODE bit in the SUPPLYENE
register of the TPS658643 PMIC.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: colibri_t20: annotate/rename lm95245 temperature sensor
Marcel Ziswiler [Sun, 2 Sep 2018 10:08:51 +0000 (12:08 +0200)]
ARM: tegra: colibri_t20: annotate/rename lm95245 temperature sensor

Rename and annotate LM95245 temperature sensor more in-line with our
other device trees.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: colibri_t20: iris: add dr_mode property
Marcel Ziswiler [Sun, 2 Sep 2018 10:08:50 +0000 (12:08 +0200)]
ARM: tegra: colibri_t20: iris: add dr_mode property

Add dr_mode property to the USB controller.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: colibri_t20: iris: add gpio wakeup key
Marcel Ziswiler [Sun, 2 Sep 2018 10:08:49 +0000 (12:08 +0200)]
ARM: tegra: colibri_t20: iris: add gpio wakeup key

Add SODIMM pin 45 as GPIO wakeup key.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: colibri_t20: use high speed uart driver
Marcel Ziswiler [Sun, 2 Sep 2018 10:08:48 +0000 (12:08 +0200)]
ARM: tegra: colibri_t20: use high speed uart driver

Use high speed UART driver compatible nvidia,tegra20-hsuart.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: colibri_t20: iris: add uart-c
Marcel Ziswiler [Sun, 2 Sep 2018 10:08:47 +0000 (12:08 +0200)]
ARM: tegra: colibri_t20: iris: add uart-c

Add UART-C.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: colibri_t20: iris: annotate uarts
Marcel Ziswiler [Sun, 2 Sep 2018 10:08:46 +0000 (12:08 +0200)]
ARM: tegra: colibri_t20: iris: annotate uarts

Annotate UART-A and UART-B.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: colibri_t20: iris: display controller rgb panel support
Marcel Ziswiler [Sun, 2 Sep 2018 10:08:45 +0000 (12:08 +0200)]
ARM: tegra: colibri_t20: iris: display controller rgb panel support

Add display controller parallel RGB panel support incl. backlight PWM.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: colibri_t20: add missing pinmux
Marcel Ziswiler [Sun, 2 Sep 2018 10:08:44 +0000 (12:08 +0200)]
ARM: tegra: colibri_t20: add missing pinmux

Explicitly add pinmux' for all T20 SoC ball groups now:
- Colibri Address/Data Bus (GMI) further pins used as GPIOs
- Colibri BL_ON
- Colibri EXT_IO*
- Colibri L_BIAS, LCD_M1 is muxed with LCD_DE today's display need DE,
  disable LCD_M1
- more Colibri LCD pins (L_* resp. LDD<*>)
- Colibri LCD (Optional 24 BPP Support)
- Colibri MMCCD
- uart_a_dsr and uart_a_dcd as GPIOs
- Colibri USB_CDET
- I2C3 (Optional)
- JTAG_RTCK
- LAN_RESET, LAN_EXT_WAKEUP and LAN_PME (All On-module)
- more NAND pins
- RESET_OUT
- THERMD_ALERT# (On-module), unlatched I2C address pin of LM95245
  temperature sensor therefore requires disabling for now

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: colibri_t20: pinmux clean-up
Marcel Ziswiler [Sun, 2 Sep 2018 10:08:43 +0000 (12:08 +0200)]
ARM: tegra: colibri_t20: pinmux clean-up

Just cosmetic pinmux clean-up.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: colibri_t20: update sound nvidia,model
Marcel Ziswiler [Sun, 2 Sep 2018 10:08:42 +0000 (12:08 +0200)]
ARM: tegra: colibri_t20: update sound nvidia,model

Update sound nvidia,model to be more in-line with our other device
trees.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: colibri_t20: indentation/line-feed/white-space clean-up
Marcel Ziswiler [Sun, 2 Sep 2018 10:08:41 +0000 (12:08 +0200)]
ARM: tegra: colibri_t20: indentation/line-feed/white-space clean-up

Cleaning up indentation, line-feed and white-space.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: colibri_t20: remove phy-reset-gpio from controller node
Marcel Ziswiler [Sun, 2 Sep 2018 10:08:40 +0000 (12:08 +0200)]
ARM: tegra: colibri_t20: remove phy-reset-gpio from controller node

Remove the phy-reset-gpio from the USB controller node as it is already
specified in the PHY node.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: colibri_t20: annotate usb ehci instances
Marcel Ziswiler [Sun, 2 Sep 2018 10:08:39 +0000 (12:08 +0200)]
ARM: tegra: colibri_t20: annotate usb ehci instances

Annotate USB EHCI instances.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: colibri_t20: add missing regulators
Marcel Ziswiler [Sun, 2 Sep 2018 10:08:38 +0000 (12:08 +0200)]
ARM: tegra: colibri_t20: add missing regulators

Add missing regulators:
- reg_lan_v_bus being USB Ethernet chip vbus supply
- carrier board reg_3v3 to be used as backlight and panel power supply
- carrier board HDMI supply being reg_5v0
- reg_usbc_vbus being the USB vbus supply of the EHCI instance 0

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: colibri_t20: regulator clean-up
Marcel Ziswiler [Sun, 2 Sep 2018 10:08:37 +0000 (12:08 +0200)]
ARM: tegra: colibri_t20: regulator clean-up

Just cosmetic regulator clean-up.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: colibri_t20: iris: use no-1-8-v
Marcel Ziswiler [Sun, 2 Sep 2018 10:08:36 +0000 (12:08 +0200)]
ARM: tegra: colibri_t20: iris: use no-1-8-v

Use no-1-8-v property rather than vmmc/vqmmc supplies and drop now
obsolete and anyway non-existent vcc_sd.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: colibri_t20: reorder host1x/hdmi properties
Marcel Ziswiler [Sun, 2 Sep 2018 10:08:35 +0000 (12:08 +0200)]
ARM: tegra: colibri_t20: reorder host1x/hdmi properties

Reorder Host1x/HDMI properties.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: colibri_t20: add local-mac-address property
Marcel Ziswiler [Sun, 2 Sep 2018 10:08:34 +0000 (12:08 +0200)]
ARM: tegra: colibri_t20: add local-mac-address property

Add empty local-mac-address property to be filled in by boot loader
(e.g. U-Boot).

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: colibri_t20: iris: annotate i2c busses
Marcel Ziswiler [Sun, 2 Sep 2018 10:08:33 +0000 (12:08 +0200)]
ARM: tegra: colibri_t20: iris: annotate i2c busses

Annotate I2C busses: GEN2_I2C and CAM_I2C (I2C3) being unused and
DDC_CLOCK/DATA on X3 pin 15/16 e.g. used for display EDID.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: colibri_t20: iris: add missing aliases
Marcel Ziswiler [Sun, 2 Sep 2018 10:08:32 +0000 (12:08 +0200)]
ARM: tegra: colibri_t20: iris: add missing aliases

Add rtc0 being the ultra low-power I2C one as found on the carrier board
and the 3rd UART being NVIDIA's UARTB.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: colibri_t20: iris: integrate i2c real time clock support
Marcel Ziswiler [Sun, 2 Sep 2018 10:08:31 +0000 (12:08 +0200)]
ARM: tegra: colibri_t20: iris: integrate i2c real time clock support

Integrate support for GEN1_I2C aka I2C_SDA/SCL on SODIMM pin 194/196 and
the M41T0M6 real time clock on the carrier board.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: colibri_t20: move aliases from module to carrier board
Marcel Ziswiler [Sun, 2 Sep 2018 10:08:30 +0000 (12:08 +0200)]
ARM: tegra: colibri_t20: move aliases from module to carrier board

Move RTC aliases from module to carrier board to be more in-line with
all our other device trees.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: apalis-tk1: drop unused hdmi_ddc label
Marcel Ziswiler [Sat, 1 Sep 2018 13:05:04 +0000 (15:05 +0200)]
ARM: tegra: apalis-tk1: drop unused hdmi_ddc label

Drop unused hdmi_ddc label.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: apalis-tk1: shorten temperature-sensor node
Marcel Ziswiler [Sat, 1 Sep 2018 13:05:03 +0000 (15:05 +0200)]
ARM: tegra: apalis-tk1: shorten temperature-sensor node

Shorten temperature-sensor node to just temp-sensor as suggested
in the binding documentation.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: apalis-tk1: get rid of fake clocks simple bus
Marcel Ziswiler [Sat, 1 Sep 2018 13:05:02 +0000 (15:05 +0200)]
ARM: tegra: apalis-tk1: get rid of fake clocks simple bus

Get rid of the fake clocks simple bus and use node names as per the
actual schematics.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: apalis-tk1: replace underscores in node names with dashes
Marcel Ziswiler [Sat, 1 Sep 2018 13:05:01 +0000 (15:05 +0200)]
ARM: tegra: apalis-tk1: replace underscores in node names with dashes

As underscores in node names are not recommended replace them all where
possible with dashes.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: apalis-tk1: drop obsolete spidev nodes
Marcel Ziswiler [Sat, 1 Sep 2018 13:05:00 +0000 (15:05 +0200)]
ARM: tegra: apalis-tk1: drop obsolete spidev nodes

Drop obsolete spidev device tree nodes as nowadays one should do this
by binding the spidev driver to specific instances/chip selects at
runtime.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: apalis-tk1: drop module level model and compatible
Marcel Ziswiler [Sat, 1 Sep 2018 13:04:59 +0000 (15:04 +0200)]
ARM: tegra: apalis-tk1: drop module level model and compatible

Drop model and compatible nodes from the module level device tree as
they get overridden by the carrier board device tree anyway.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: apalis-tk1: reorder SD card properties
Marcel Ziswiler [Sat, 1 Sep 2018 13:04:58 +0000 (15:04 +0200)]
ARM: tegra: apalis-tk1: reorder SD card properties

Reorder SD card properties.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: apalis-tk1: reorder cpu dfll clock properties
Marcel Ziswiler [Sat, 1 Sep 2018 13:04:57 +0000 (15:04 +0200)]
ARM: tegra: apalis-tk1: reorder cpu dfll clock properties

Reorder CPU DFLL clock properties.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: apalis-tk1: add toradex, apalis-tk1-v1.2 compatible
Marcel Ziswiler [Sat, 1 Sep 2018 13:04:56 +0000 (15:04 +0200)]
ARM: tegra: apalis-tk1: add toradex, apalis-tk1-v1.2 compatible

Add toradex,apalis-tk1-v1.2 compatible.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: apalis-tk1: enable emmc ddr52 mode
Marcel Ziswiler [Sat, 1 Sep 2018 13:04:55 +0000 (15:04 +0200)]
ARM: tegra: apalis-tk1: enable emmc ddr52 mode

Add mmc-ddr-1_8v property enabling eMMC DDR52 mode.

root@apalis-tk1-mainline:~# cat /sys/kernel/debug/mmc2/ios
clock:          52000000 Hz
actual clock:   52000000 Hz
vdd:            21 (3.3 ~ 3.4 V)
bus mode:       2 (push-pull)
chip select:    0 (don't care)
power mode:     2 (on)
bus width:      3 (8 bits)
timing spec:    8 (mmc DDR52)
signal voltage: 1 (1.80 V)
driver type:    0 (driver type B)
root@apalis-tk1-mainline:~# hdparm -t /dev/mmcblk2

/dev/mmcblk2:
 Timing buffered disk reads: 256 MB in  3.02 seconds =  84.83 MB/sec

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: apalis-tk1: add proper emmc vmmc and vqmmc supplies
Marcel Ziswiler [Sat, 1 Sep 2018 13:04:54 +0000 (15:04 +0200)]
ARM: tegra: apalis-tk1: add proper emmc vmmc and vqmmc supplies

Add proper eMMC vmmc and vqmmc supplies e.g. fixing signalling voltage.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: apalis-tk1: reorder backlight properties
Marcel Ziswiler [Sat, 1 Sep 2018 13:04:53 +0000 (15:04 +0200)]
ARM: tegra: apalis-tk1: reorder backlight properties

Reorder backlight properties.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: apalis-tk1: white-space clean-up
Marcel Ziswiler [Sat, 1 Sep 2018 13:04:52 +0000 (15:04 +0200)]
ARM: tegra: apalis-tk1: white-space clean-up

White-space clean-up.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: apalis-tk1: drop unused pinmux label
Marcel Ziswiler [Sat, 1 Sep 2018 13:04:51 +0000 (15:04 +0200)]
ARM: tegra: apalis-tk1: drop unused pinmux label

Drop unused pinmux label.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: apalis-tk1: add missing regulators
Marcel Ziswiler [Sat, 1 Sep 2018 13:04:50 +0000 (15:04 +0200)]
ARM: tegra: apalis-tk1: add missing regulators

Add missing regulators:
- reg_module_3v3_audio being VDDA supply of SGTL5000
- VDDD supply of SGTL5000 actually being reg_1v8_vio
- TMP451 temperature sensor vcc supply being reg_module_3v3
- usb3-0 vbus supply being reg_usbh_vbus
- usb3-1 vbus supply being reg_usbo1_vbus
- carrier board HDMI supply being reg_5v0
- carrier board sata target 5v supply being reg_5v0
- carrier board sata target 12v supply being reg_12v0
- carrier board reg_3v3 actually being backlight power supply

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: apalis-tk1: regulator clean-up
Marcel Ziswiler [Sat, 1 Sep 2018 13:04:49 +0000 (15:04 +0200)]
ARM: tegra: apalis-tk1: regulator clean-up

Just cosmetic regulator clean-up.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: apalis-tk1: reorder padctl properties
Marcel Ziswiler [Sat, 1 Sep 2018 13:04:48 +0000 (15:04 +0200)]
ARM: tegra: apalis-tk1: reorder padctl properties

Reorder padctl properties.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: apalis-tk1: reorder host1x/hdmi properties
Marcel Ziswiler [Sat, 1 Sep 2018 13:04:47 +0000 (15:04 +0200)]
ARM: tegra: apalis-tk1: reorder host1x/hdmi properties

Reorder Host1x/HDMI properties.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: apalis-tk1: add local-mac-address property
Marcel Ziswiler [Sat, 1 Sep 2018 13:04:46 +0000 (15:04 +0200)]
ARM: tegra: apalis-tk1: add local-mac-address property

Add empty local-mac-address property to be filled in by boot loader
(e.g. U-Boot).

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: colibri_t30: annotate power I2C being on-module
Marcel Ziswiler [Sat, 1 Sep 2018 08:12:48 +0000 (10:12 +0200)]
ARM: tegra: colibri_t30: annotate power I2C being on-module

The power I2C bus aka PWR_I2C which connects to the audio codec, PMIC,
temperature sensor and touch screen controller is really on-module only.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: colibri_t30: annotate unused i2c busses
Marcel Ziswiler [Sat, 1 Sep 2018 08:12:47 +0000 (10:12 +0200)]
ARM: tegra: colibri_t30: annotate unused i2c busses

Both GEN2_I2C as well as CAM_I2C (I2C3) are unused in our design.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: colibri_t30: add mcp2515 vdd and xceiver supplies
Marcel Ziswiler [Sat, 1 Sep 2018 08:12:46 +0000 (10:12 +0200)]
ARM: tegra: colibri_t30: add mcp2515 vdd and xceiver supplies

Add the MCP2515 SPI CAN controller's vdd-supply being the regular
carrier board's reg_3v3 and xceiver-supply being reg_5v0.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: colibri_t30: remove unused mcp2515 can0 label
Marcel Ziswiler [Sat, 1 Sep 2018 08:12:45 +0000 (10:12 +0200)]
ARM: tegra: colibri_t30: remove unused mcp2515 can0 label

Get rid of the unused MCP2515 SPI CAN controller can0 label.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: colibri_t30: fix mcp2515 can controller interrupt polarity
Marcel Ziswiler [Sat, 1 Sep 2018 08:12:44 +0000 (10:12 +0200)]
ARM: tegra: colibri_t30: fix mcp2515 can controller interrupt polarity

Fix the MCP2515 SPI CAN controller interrupt polarity which according
to its datasheet defaults to low-active aka falling edge.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: colibri_t30: rename tps65911@2d, stmpe811@41 and tps62362@60
Marcel Ziswiler [Sat, 1 Sep 2018 08:12:43 +0000 (10:12 +0200)]
ARM: tegra: colibri_t30: rename tps65911@2d, stmpe811@41 and tps62362@60

Rename a few nodes using more common names:
- rename tps65911@2d to pmic@2d
- rename stmpe811@41 to touchscreen@41
- rename tps62362@60 to regulator@60

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: colibri_t30: rename hdmiddc to hdmi_ddc
Marcel Ziswiler [Sat, 1 Sep 2018 08:12:42 +0000 (10:12 +0200)]
ARM: tegra: colibri_t30: rename hdmiddc to hdmi_ddc

Rename hdmiddc to hdmi_ddc to be more in-line with other device trees.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: colibri_t30: drop obsolete spidev node
Marcel Ziswiler [Sat, 1 Sep 2018 08:12:41 +0000 (10:12 +0200)]
ARM: tegra: colibri_t30: drop obsolete spidev node

Drop obsolete spidev device tree node as nowadays one should do this
by binding the spidev driver to specific instances/chip selects at
runtime.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: colibri_t30: drop module level model and compatible
Marcel Ziswiler [Sat, 1 Sep 2018 08:12:40 +0000 (10:12 +0200)]
ARM: tegra: colibri_t30: drop module level model and compatible

Drop model and compatible nodes from the module level device tree as
they get overridden by the carrier board device tree anyway.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: colibri_t30: update compatibility comment
Marcel Ziswiler [Sat, 1 Sep 2018 08:12:39 +0000 (10:12 +0200)]
ARM: tegra: colibri_t30: update compatibility comment

Update compatibility comment.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: colibri_t30: annotate ehci instance 1
Marcel Ziswiler [Sat, 1 Sep 2018 08:12:38 +0000 (10:12 +0200)]
ARM: tegra: colibri_t30: annotate ehci instance 1

Annotate EHCI instance 1 (USB2_DP/N) connecting to ASIX AX88772B USB to
Ethernet chip being on-module.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: colibri_t30: annotate sd card detect
Marcel Ziswiler [Sat, 1 Sep 2018 08:12:37 +0000 (10:12 +0200)]
ARM: tegra: colibri_t30: annotate sd card detect

Annotate SD card detect.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: colibri_t30: enable hda over hdmi
Marcel Ziswiler [Sat, 1 Sep 2018 08:12:36 +0000 (10:12 +0200)]
ARM: tegra: colibri_t30: enable hda over hdmi

Enable HDA over HDMI.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: colibri_t30: add gpio hog to unreset usb ethernet chip
Marcel Ziswiler [Sat, 1 Sep 2018 08:12:35 +0000 (10:12 +0200)]
ARM: tegra: colibri_t30: add gpio hog to unreset usb ethernet chip

Add GPIO hog to unreset ASIX AX88772B USB Ethernet chip.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: colibri_t30: remove unused nvidia, is-wired property
Marcel Ziswiler [Sat, 1 Sep 2018 08:12:34 +0000 (10:12 +0200)]
ARM: tegra: colibri_t30: remove unused nvidia, is-wired property

Remove unused nvidia,is-wired property.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: colibri_t30: move input include to carrier board
Marcel Ziswiler [Sat, 1 Sep 2018 08:12:33 +0000 (10:12 +0200)]
ARM: tegra: colibri_t30: move input include to carrier board

Move input include to carrier board.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2 years agoARM: tegra: colibri_t30: line break long compatible property line
Marcel Ziswiler [Sat, 1 Sep 2018 08:12:32 +0000 (10:12 +0200)]
ARM: tegra: colibri_t30: line break long compatible property line

Line break long compatible property line.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>