muen/linux.git
3 years agoMerge tag 'am654-for-v4.19-signed' of git://git.kernel.org/pub/scm/linux/kernel/git...
Olof Johansson [Sat, 21 Jul 2018 22:06:03 +0000 (15:06 -0700)]
Merge tag 'am654-for-v4.19-signed' of git://git./linux/kernel/git/tmlind/linux-omap into next/dt

TI AM654 support for v4.19 merge window

This branch adds initial support for new Texas Instruments AM654
quad core A53 ARMv8 SoC. It's the first device for TI K3 multicore SoC
architecture.

Initially only basic devices are configured, support for more devices
will follow later on. And many of the internal devices familiar from
earlier TI SoCs should work with existing kernel device drivers.

* tag 'am654-for-v4.19-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  arm64: dts: ti: Add support for AM654 EVM base board
  soc: ti: Add Support for AM654 SoC config option
  arm64: dts: ti: Add Support for AM654 SoC
  arm64: Add support for TI's K3 Multicore SoC architecture
  dt-bindings: arm: ti: Add bindings for AM654 SoC

Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoMerge tag 'imx-dt64-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo...
Olof Johansson [Sat, 21 Jul 2018 21:56:39 +0000 (14:56 -0700)]
Merge tag 'imx-dt64-4.19' of git://git./linux/kernel/git/shawnguo/linux into next/dt

Freescale arm64 device tree update for 4.19:
 - Update device tree sources to use SPDX identifiers for license.
 - Add cooling device property '#cooling-cells' for all CPUs of
   a cluster.

* tag 'imx-dt64-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  arm64: dts: freescale: Add missing cooling device properties for CPUs
  arm64: dts: freescale: Update to use SPDX identifiers

Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoMerge tag 'imx-dt-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo...
Olof Johansson [Sat, 21 Jul 2018 21:55:45 +0000 (14:55 -0700)]
Merge tag 'imx-dt-4.19' of git://git./linux/kernel/git/shawnguo/linux into next/dt

i.MX device tree update for 4.19:
 - Add device tree support for i.MX6SLL SoC.
 - New board support: ConnectCore 6UL System-On-Module and SBC Express;
   ZII SCU2 Mezz, SCU3 ESB, SSMB SPU3 and CFU1 board; i.MX6SLL EVK
   board; Engicam i.CoreM6 1.5 Quad/Dual MIPI; LogicPD MX31Lite board;
   i.MX53 HSC/DDC boards from K+P.
 - Remove fake regulator bus container node and enable USB OTG support
   for i.MX6 wandboard and riotboard.
 - Populate RAVE SP EEPROM, backlight, power button and watchdog devices
   for ZII boards.
 - Add cooling-cells for cpufreq cooling device, and add OPP properties
   for all CPUs.
 - A series from Anson Huang to enable LCD panel and backlight support
   for imx6sll-evk board.
 - Make pfuze100 sw4 regulator always-on for for a few Freescale/NXP
   development boards, because the regulator is critical there and
   cannot be turned off.
 - Add more device support for i.MX5: AIPSTZ, SAHARA Crypto, M4IF,
   Tigerp, PMU, CodaHx4 VPU.
 - Enable PMU secure-reg-access for imx51-babbage, imx51-zii-rdu1 and
   imx53-ppd board.
 - Switch more device tree license to use SPDX identifier.
 - Switch to use OF graph to describe the display for imx7d-nitrogen7.
 - Add chosen/stdout-path for more boards, so that earlycon can be
   enabled more easily on kernel cmdline.
 - Convert GPC to new device tree bindings and add Vivante gpu nodes
   for i.MX6SL SoC.
 - Add more device support for imx6dl-mamoj board: parallel display,
   WiFi and USB.
 - A series from Stefan Agner to update i.MX6 apalis/colibri boards on
   various aspects: SD/MMC card detection, regulators, etc.

* tag 'imx-dt-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (96 commits)
  ARM: dts: imx7d: remove "operating-points" property for cpu1
  ARM: dts: vf610-zii-ssmb-spu3: Fix W=1 level warnings
  ARM: dts: vf610: Add ZII CFU1 board
  ARM: dts: imx6dl-mamoj: Add usb host and device support
  ARM: dts: imx6dl-mamoj: Add Wifi support
  ARM: dts: imx6dl-mamoj: Add parallel display support
  ARM: dts: vf610: Add ZII SSMB SPU3 board
  ARM: dts: imx6ul-pico-hobbit: Do not hardcode the memory size
  ARM: dts: imx6sl-evk: make pfuze100 sw4 always on
  ARM: dts: imx6sll-evk: make pfuze100 sw4 always on
  ARM: dts: imx6sx-sdb-reva: make pfuze100 sw4 always on
  ARM: dts: imx6qdl-sabresd: make pfuze100 sw4 always on
  ARM: dts: imx6sl-evk: add missing GPIO iomux setting
  ARM: dts: imx51-zii-scu3-esb: Fix RAVE SP watchdog compatible string
  ARM: dts: imx51-zii-scu3-esb: Add switch IRQ line pinumx config
  ARM: dts: imx6sx-nitrogen6sx: remove obsolete display configuration
  ARM: dts: imx7d-nitrogen7: use OF graph to describe the display
  ARM: dts: imx: Switch Boundary Devices boards to SPDX identifier
  ARM: dts: imx6sl: Add vivante gpu nodes
  ARM: dts: imx6sll-evk: enable SEIKO 43WVF1G lcdif panel
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoMerge tag 'imx-dt-clkdep-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawn...
Olof Johansson [Sat, 21 Jul 2018 21:54:42 +0000 (14:54 -0700)]
Merge tag 'imx-dt-clkdep-4.19' of git://git./linux/kernel/git/shawnguo/linux into next/dt

i.MX device tree changes with clock dependency:
 - Add clock for i.MX6UL GPIO blocks

* tag 'imx-dt-clkdep-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: dts: imx6ul: add GPIO clocks
  clk: imx6ul: remove clks_init_on array
  clk: imx6ul: add GPIO clock gates
  dt-bindings: clock: imx6ul: Do not change the clock definition order

Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoMerge tag 'amlogic-dt64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman...
Olof Johansson [Sat, 21 Jul 2018 21:49:25 +0000 (14:49 -0700)]
Merge tag 'amlogic-dt64-1' of https://git./linux/kernel/git/khilman/linux-amlogic into next/dt

Amlogic 64-bit DT updates for v4.19
- new SoC: S805x
- new board: S805x-based P241 board from Amlogic
- AXG: add ADC support w/buttons, add pins for PDM, SPDIF
- AXG: s400 board: preliminary support for audio
- GX: nanopi-k2: add HDMI, CEC, CVBS support

* tag 'amlogic-dt64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  ARM64: dts: meson-axg: add pdm pins
  ARM64: dts: meson-axg: add spdif input pins
  ARM64: dts: meson-axg: remove spdif out from gpio a7
  ARM64: dts: meson-axg: add adc buttons the S400
  ARM64: dts: meson-axg: remove vddio_ao18 from SoC dtsi
  ARM64: dts: meson-axg: add saradc support
  ARM64: dts: add S805X based P241 board
  dt-bindings: amlogic: Add support for GXL S805X and the P241 board
  ARM64: dts: amlogic: Add missing cooling device properties for CPUs
  ARM64: dts: meson-axg: add spdif output pins
  ARM64: dts: meson-axg: add s400 speaker amplifier
  ARM64: dts: meson-axg: add s400 main 12v supply
  ARM64: dts: meson-axg: add s400 microphone card leds
  ARM64: dts: meson-gxbb-nanopi-k2: Add HDMI, CEC and CVBS nodes
  ARM64: dts: meson-gx-p23x-q20x: move the wifi node to each board's .dts
  ARM64: dts: meson: enable the saradc node in meson-gx-p23x-q20x.dtsi

Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoMerge tag 'renesas-dt-bindings-for-v4.19' of https://git.kernel.org/pub/scm/linux...
Olof Johansson [Sat, 21 Jul 2018 21:48:09 +0000 (14:48 -0700)]
Merge tag 'renesas-dt-bindings-for-v4.19' of https://git./linux/kernel/git/horms/renesas into next/dt

Renesas ARM Based SoC DT Bindings Updates for v4.19

Bindings relating to initial support for RZ/N1D (R9A06G032) SoC and its
RZN1D-DB board:

* Add Renesas R9A06G032 SMP enable method
* Document SoC and Board bindings

* tag 'renesas-dt-bindings-for-v4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  dt-bindings: cpu: Add Renesas R9A06G032 SMP enable method.
  dt-bindings: arm: Document the RZN1D-DB board

Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoMerge tag 'renesas-arm64-dt2-for-v4.19' of https://git.kernel.org/pub/scm/linux/kerne...
Olof Johansson [Sat, 21 Jul 2018 21:35:40 +0000 (14:35 -0700)]
Merge tag 'renesas-arm64-dt2-for-v4.19' of https://git./linux/kernel/git/horms/renesas into next/dt

Second Round of Renesas ARM64 Based SoC DT Updates for v4.19

Corrections:

* Remove non-existing STBE region from Ether-AVB node in DT of
  R-Car E3 (r8a77990) SoC

Cleanups:

* Consistently use rwdt as label for Renesas Watchdog Timer devices
* Add second port to rcar_sound placeholder in DT of R-Car M3-N (r8a77965) SoC
* Fix adv7482 decimal unit addresses in DT of Salvator-X and -XS boards

Enhancements:

* Describe in DT:
  - INTC-EX of R-Car V3H (r8a77980) SoC
  - USB3.0 of R-Car E3 (r8a77980) SoC
  - All SCIF and HSCIF devices of R-Car D3 (r8a77995) SoC.
    Previously only SCIF2, used as the debug consile, was described.
  - All IPMMU devicesof R-Car M3-N (r8a77965), V3H (r8a77980) and
    E3 (r8a77990) SoCs
* Enable USB3.0 in DT of R-Car E3 (r8a77980) based Ebisu board
* Prefer HSCIF1 over SCIF1 in DT of Salvator-X and -XS boards

* tag 'renesas-arm64-dt2-for-v4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  arm64: dts: renesas: r8a77980: add INTC-EX support
  arm64: dts: renesas: r8a77990: Enable USB3.0 host for Ebisu board
  arm64: dts: renesas: r8a77995: Add SCIF {0,1,3,4,5} and all HSCIF device nodes
  arm64: dts: renesas: r8a779{65,80,90}: Add IPMMU devices nodes
  arm64: dts: renesas: Unify the labels for RWDT
  arm64: dts: renesas: salvator-common: Prefer HSCIF1 over SCIF1
  arm64: dts: renesas: r8a77965: Add second port to rcar_sound placeholder
  arm64: dts: renesas: salvator-common: Fix adv7482 decimal unit addresses
  arm64: dts: renesas: r8a77990: Remove non-existing STBE region

Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoMerge tag 'at91-ab-4.19-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni...
Olof Johansson [Sat, 21 Jul 2018 21:30:08 +0000 (14:30 -0700)]
Merge tag 'at91-ab-4.19-dt' of git://git./linux/kernel/git/abelloni/linux into next/dt

AT91 DT for 4.19:

 - New boards from Laird: WB45N, WB50N, SOM60 modules and DVK, Gatwick
 - fix the PMC compatibles

* tag 'at91-ab-4.19-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  ARM: dts: at91: fix typos for SSC TD functions
  ARM: dts: add support for Laird SOM60 module and DVK boards
  ARM: dts: add support for Gatwick board based on WB50N
  ARM: dts: add support for Laird WB50N cpu module and DVK
  ARM: dts: add support for Laird WB45N cpu module and DVK
  ARM: dts: at91: add labels to soc dtsi for derivative boards
  dt-bindings: add laird and giantec vendor prefix
  ARM: dts: fix PMC compatible
  ARM: at91: fix USB clock detection handling
  dt-bindings: clk: at91: Document all the PMC compatibles
  dt-bindings: arm: remove PMC bindings

Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoARM: dts: berlin: Add missing OPP properties for CPUs
Viresh Kumar [Fri, 20 Jul 2018 10:11:50 +0000 (18:11 +0800)]
ARM: dts: berlin: Add missing OPP properties for CPUs

The OPP properties, like "operating-points", should either be present
for all the CPUs of a cluster or none. If these are present only for a
subset of CPUs of a cluster then things will start falling apart as soon
as the CPUs are brought online in a different order. For example, this
will happen because the operating system looks for such properties in
the CPU node it is trying to bring up, so that it can create an OPP
table.

Add such missing properties.

Fix other missing properties (clocks, clock latency) as well to
make it all work.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoMerge tag 'hisi-arm64-dt-for-4.19v2' of git://github.com/hisilicon/linux-hisi into...
Olof Johansson [Sat, 21 Jul 2018 21:28:31 +0000 (14:28 -0700)]
Merge tag 'hisi-arm64-dt-for-4.19v2' of git://github.com/hisilicon/linux-hisi into next/dt

ARM64: DT: Hisilicon SoC DT updates for 4.19v2

- Tidy up MMC properties for hi3660
- Remove keep-power-in-suspend on hikey and hikey960 to
  avoid keeping wifi power during suspend and let the
  user enable it if required
- Update idle states for hikey960
- Add missing cooling device properties for cpus on hi6220

* tag 'hisi-arm64-dt-for-4.19v2' of git://github.com/hisilicon/linux-hisi:
  arm64: dts: hisilicon: Add missing cooling device properties for CPUs
  arm64: hikey960: update idle-states
  arm64: dts: hikey: Remove keep-power-in-suspend property
  arm64: dts: hikey960: Remove keep-power-in-suspend property
  arm64: dts: hikey960: Clean up MMC properties and move to proper file
  arm64: dts: hikey960: Remove deprecated MMC properties

Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoMerge tag 'zynq-dt-for-v4.19-v2' of https://github.com/Xilinx/linux-xlnx into next/dt
Olof Johansson [Sat, 21 Jul 2018 21:27:56 +0000 (14:27 -0700)]
Merge tag 'zynq-dt-for-v4.19-v2' of https://github.com/Xilinx/linux-xlnx into next/dt

ARM: dts: zynq: DT changes for v4.19

- Add Z-turn board
- Add mmc aliases
- Fix model information
- Sort out documentatio
- Update Zybo Z7
- Fix gpio-keys

* tag 'zynq-dt-for-v4.19-v2' of https://github.com/Xilinx/linux-xlnx:
  ARM: dts: zynq: Remove #address/#size-cells from gpio-keys
  ARM: dts: zynq: Add LEDs to the Zybo Z7 board
  ARM: dts: zynq: Use gpio constants for the Zybo Z7 board
  ARM: dts: zynq: Fix memory size on the Zybo Z7 board
  dt-bindings: xilinx: zynq: Add missing boards
  dt-bindings: xilinx: zynq: Move Paralella board to Xilinx
  dt-bindings: xilinx: zynq: Sort entries alphabetically
  dt-bindings: xilinx: zynq: Improve boards description
  ARM: dts: zynq: correct and improve the model property of dt files
  ARM: dts: zynq: Set correct manufacturer for ZedBoard and MicroZed boards
  ARM: dts: zynq: Add mmc alias for zc702/zc706/zed/zybo
  ARM: dts: zynq: Add support for Z-turn board

Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoMerge tag 'zynqmp-dt-for-v4.19-v2' of https://github.com/Xilinx/linux-xlnx into next/dt
Olof Johansson [Sat, 21 Jul 2018 21:27:26 +0000 (14:27 -0700)]
Merge tag 'zynqmp-dt-for-v4.19-v2' of https://github.com/Xilinx/linux-xlnx into next/dt

arm: dts: zynqmp: DT changes for v4.19

- Use serdev for BT in zcu100
- Remove ep108
- Fix gpio-keys binding
- Add suport for Ultra96

* tag 'zynqmp-dt-for-v4.19-v2' of https://github.com/Xilinx/linux-xlnx:
  arm64: dts: zynqmp: Add support for Avnet Ultra96 rev1 board
  arm64: dts: zynqmp: Remove #address/#size-cells from gpio-keys
  arm64: dts: zynqmp: Remove ep108 board
  arm64: dts: zynqmp: Use serdev for zcu100 BT

Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoMerge tag 'uniphier-dt64-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git...
Olof Johansson [Sat, 21 Jul 2018 21:26:49 +0000 (14:26 -0700)]
Merge tag 'uniphier-dt64-v4.19' of git://git./linux/kernel/git/masahiroy/linux-uniphier into next/dt

UniPhier ARM64 SoC DT updates for v4.19

- Add missing #cooling-cells properties

- Add hp-det-gpio property to detect headphone via GPIO

* tag 'uniphier-dt64-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
  arm64: dts: uniphier: add headphone detect gpio for LD11 global board
  arm64: dts: uniphier: add headphone detect gpio for LD20 global board
  arm64: dts: uniphier: Add missing cooling device properties for CPUs

Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoMerge tag 'uniphier-dt-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahi...
Olof Johansson [Sat, 21 Jul 2018 21:26:15 +0000 (14:26 -0700)]
Merge tag 'uniphier-dt-v4.19' of git://git./linux/kernel/git/masahiroy/linux-uniphier into next/dt

UniPhier ARM SoC DT updates for v4.19

- Add missing #cooling-cells properties

* tag 'uniphier-dt-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
  ARM: dts: uniphier: Add missing cooling device properties for CPUs

Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoMerge tag 'omap-for-v4.19/dt-pt2-signed' of git://git.kernel.org/pub/scm/linux/kernel...
Olof Johansson [Sat, 21 Jul 2018 21:25:39 +0000 (14:25 -0700)]
Merge tag 'omap-for-v4.19/dt-pt2-signed' of git://git./linux/kernel/git/tmlind/linux-omap into next/dt

Few more beaglebone variants for v4.19 merge window

This adds dts files for two new beaglebone variants for
Octavo Systems OSD3358-SM-RED and Sancloud am335x-sancloud-bbe.

* tag 'omap-for-v4.19/dt-pt2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: am335x: add am335x-sancloud-bbe board support
  dt-bindings: Add vendor prefix for Sancloud
  ARM: dts: Add DT support for Octavo Systems OSD3358-SM-RED based on TI AM335x

Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoARM: dts: imx7d: remove "operating-points" property for cpu1
Anson Huang [Thu, 19 Jul 2018 08:24:19 +0000 (16:24 +0800)]
ARM: dts: imx7d: remove "operating-points" property for cpu1

Commit b97872d4eb22 ("ARM: dts: imx: Add missing OPP properties for CPUs")
added "operating-points" property for all CPUs, but i.MX7D already has
"operating-points-v2" property on both CPUs, so no need to add
"operating-points" property again, this patch removes it.

Fixes: b97872d4eb22 ("ARM: dts: imx: Add missing OPP properties for CPUs")
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
3 years agoARM: dts: vf610-zii-ssmb-spu3: Fix W=1 level warnings
Andrey Smirnov [Thu, 19 Jul 2018 20:00:02 +0000 (13:00 -0700)]
ARM: dts: vf610-zii-ssmb-spu3: Fix W=1 level warnings

Fix a couple of things that were causing warning when building DTB
with W=1.

Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: cphealy@gmail.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
3 years agoARM: dts: vf610: Add ZII CFU1 board
Andrey Smirnov [Thu, 19 Jul 2018 19:57:24 +0000 (12:57 -0700)]
ARM: dts: vf610: Add ZII CFU1 board

Add support for the Zodiac Inflight Innovations CFU1
board (VF610-based).

Cc: linux-arm-kernel@lists.infradead.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Tested-by: Chris Healy <cphealy@gmail.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
3 years agoARM64: dts: meson-axg: add pdm pins
Jerome Brunet [Mon, 16 Jul 2018 10:11:50 +0000 (12:11 +0200)]
ARM64: dts: meson-axg: add pdm pins

Add pdm input pin definitions to meson AXG

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
3 years agoARM64: dts: meson-axg: add spdif input pins
Jerome Brunet [Mon, 16 Jul 2018 10:11:49 +0000 (12:11 +0200)]
ARM64: dts: meson-axg: add spdif input pins

Add spdif input pin definitions to meson AXG

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
3 years agoARM64: dts: meson-axg: remove spdif out from gpio a7
Jerome Brunet [Mon, 16 Jul 2018 10:11:48 +0000 (12:11 +0200)]
ARM64: dts: meson-axg: remove spdif out from gpio a7

Spdif out in not multiplexed on gpio A7 (spdif in is)
Remove this entry to fix the problem.

Fixes: 53c03b0aff36 ("ARM64: dts: meson-axg: add spdif output pins")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
3 years agoARM64: dts: meson-axg: add adc buttons the S400
Jerome Brunet [Mon, 16 Jul 2018 10:11:47 +0000 (12:11 +0200)]
ARM64: dts: meson-axg: add adc buttons the S400

Add the 6 adc buttons of the amlogic S400

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
3 years agoARM64: dts: meson-axg: remove vddio_ao18 from SoC dtsi
Jerome Brunet [Mon, 16 Jul 2018 10:11:46 +0000 (12:11 +0200)]
ARM64: dts: meson-axg: remove vddio_ao18 from SoC dtsi

Regulator should not be defined inside the SoC dtsi file.
vddio_ao18 is already defined in the S400 board dts anyway.

Fixes: bb8a2ebd0498 ("ARM64: dts: meson-axg: add saradc support")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
3 years agoARM64: dts: meson-axg: add saradc support
Xingyu Chen [Mon, 2 Jul 2018 22:25:15 +0000 (22:25 +0000)]
ARM64: dts: meson-axg: add saradc support

Add the DT info for SAR ADC of the Amlogic's Meson-AXG SoC.

Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
3 years agoARM64: dts: add S805X based P241 board
Neil Armstrong [Thu, 5 Jul 2018 09:50:43 +0000 (11:50 +0200)]
ARM64: dts: add S805X based P241 board

The Amlogic P241 board is the Reference Design board for the S805X
variant of the Amlogic Meson GXL SoC family.

The P241 board has the following features :
- 1GiB DDR4 Memory
- HDMI Connector with CEC
- A/V jack with Stereo Audio and CVBS
- 10/100 Ethernet
- 2x USB2.0 Type-A
- On-board WiFi SDIO Module
- On-board eMMC storage
- Infraread Received
- Factory Reset button
- UART connector

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
3 years agodt-bindings: amlogic: Add support for GXL S805X and the P241 board
Neil Armstrong [Thu, 5 Jul 2018 09:50:42 +0000 (11:50 +0200)]
dt-bindings: amlogic: Add support for GXL S805X and the P241 board

The S805X is a variant of the Amlogic Meson GXL SoC family with the
following physical limitations :
- No SDCard interface
- No GPIOCLK pins
- No USB OTG ID pin (but Gadget feature can stil be forced)
- No 5V regulator
- Reduced ADC inputs (only ADC0 and ADC1)
- GPIODV_26, GPIOAO_3, GPIOAO_4, GPIOAO_5, GPIOAO_6, GPIOX_14,
  GPIOX_15, GPIOH_3 are no more exposed on the package

Amlogic exposes the following SW limitations :
- HDMI max resolution should be 1080p60, VPU clock should be downgraded
- Video Decoding should be limited to 1080p60, VDEC clock should be downgraded
- CPU speed should be limited by SCPI OPP table to 1.2GHz
- DRAM interface is limited to DDR4 16bit up to 1GiB

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
3 years agoARM64: dts: amlogic: Add missing cooling device properties for CPUs
Viresh Kumar [Fri, 25 May 2018 05:40:01 +0000 (11:10 +0530)]
ARM64: dts: amlogic: Add missing cooling device properties for CPUs

The cooling device properties, like "#cooling-cells" and
"dynamic-power-coefficient", should either be present for all the CPUs
of a cluster or none. If these are present only for a subset of CPUs of
a cluster then things will start falling apart as soon as the CPUs are
brought online in a different order. For example, this will happen
because the operating system looks for such properties in the CPU node
it is trying to bring up, so that it can register a cooling device.

Add such missing properties.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
[khilman: s/arm64/ARM64/ in Subject]
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
3 years agoARM64: dts: meson-axg: add spdif output pins
Jerome Brunet [Wed, 4 Jul 2018 17:04:09 +0000 (19:04 +0200)]
ARM64: dts: meson-axg: add spdif output pins

Add the different pin configurations for the spdif output

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
3 years agoARM64: dts: meson-axg: add s400 speaker amplifier
Jerome Brunet [Thu, 28 Jun 2018 09:50:54 +0000 (11:50 +0200)]
ARM64: dts: meson-axg: add s400 speaker amplifier

Add the first of the two tas5707 power amplifier present on the
speaker daughter board.

According to the schematics of the S400 v3, only I2SB_DIN3 and
I2SC_DOUT2 will be available to the speaker board.

9R83, 9R84 and 9R18 are not connected so no audio signal will be
provided to the second amplifier. There is no point in enabling it
even if it is visible on the i2c bus.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
3 years agoARM64: dts: meson-axg: add s400 main 12v supply
Jerome Brunet [Thu, 28 Jun 2018 09:50:53 +0000 (11:50 +0200)]
ARM64: dts: meson-axg: add s400 main 12v supply

Add a fixed regulator for the main 12v which is the main power supply
of the board.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
3 years agoARM64: dts: meson-axg: add s400 microphone card leds
Jerome Brunet [Thu, 28 Jun 2018 09:50:52 +0000 (11:50 +0200)]
ARM64: dts: meson-axg: add s400 microphone card leds

The microphone card connected to the s400 has 6 leds controlled
through an additional i2c gpio controller.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
3 years agoARM64: dts: meson-gxbb-nanopi-k2: Add HDMI, CEC and CVBS nodes
Neil Armstrong [Tue, 26 Jun 2018 07:40:55 +0000 (09:40 +0200)]
ARM64: dts: meson-gxbb-nanopi-k2: Add HDMI, CEC and CVBS nodes

The Amlogic Meson GXBB based Nanopi-K2 board has an HDMI connector
with CEC and CVBS available on the 40pin header.
This patch adds the nodes to enable HDMI, CEC and CVBS functionnalities.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
3 years agoARM64: dts: meson-gx-p23x-q20x: move the wifi node to each board's .dts
Martin Blumenstingl [Sat, 23 Jun 2018 19:38:28 +0000 (21:38 +0200)]
ARM64: dts: meson-gx-p23x-q20x: move the wifi node to each board's .dts

meson-gx-p23x-q20x.dtsi is currently used by five boards:
- Amlogic P230 and P231 (which should be identical, apart from the
  external RGMII PHY on P230 whereas P231 can only use the internal PHY)
- Amlogic Q200 (identical to P230 but with an S912 GXM SoC instead of a
  GXL S905D SoC) and Q201 (identical to P231 but with an S912 GXM SoC
  instead of a GXL S905D SoC)
- NEXBOX A1 (based on the S912 GXM SoC)

The Amlogic P230 board uses a Broadcom BCM4356 SDIO wifi chip. Since the
other Amlogic reference design boards are very similar it's safe to
assume that these also use a Broadcom based SDIO wifi chip (which is
also how it was configured in meson-gx-p23x-q20x.dtsi).

However, NEXBOX A1 comes with a "longsys LTM8830" SDIO wifi module,
which is based on the "Qualcomm Atheros QCA9377-3(QCA1023-0)" chipset.

Thus move the wifi node from meson-gx-p23x-q20x.dtsi to each of the
four Amlogic reference board's .dts files.
There are no devicetree bindings for the QCA9377 SDIO wifi module yet,
so nothing is added to meson-gxm-nexbox-a1.dts.

Fixes: f51b454549b812 ("ARM64: dts: meson-gxm: Add support for the Nexbox A1")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
3 years agoARM64: dts: meson: enable the saradc node in meson-gx-p23x-q20x.dtsi
Martin Blumenstingl [Sat, 23 Jun 2018 14:59:59 +0000 (16:59 +0200)]
ARM64: dts: meson: enable the saradc node in meson-gx-p23x-q20x.dtsi

meson-gxl-s905d-p230.dts and meson-gxm-q200.dts enable the saradc node
(and configure it's vref-supply "VDDIO_AO18") in their corresponding
.dts file.
Move both (the saradc node as well as the VDDIO_AO18 regulator) to
remove some duplicate code.

As a positive side-effect this enables the saradc also for the P231 (GXL
S905D) and Q201 (GXM S912) development boards which are similar to the
P230/Q200 boards (P231 and Q201 use the internal 100Mbit/s PHY, while
P230 and Q200 have an external RGMII PHY).

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
3 years agoarm64: dts: renesas: r8a77980: add INTC-EX support
Sergei Shtylyov [Tue, 17 Jul 2018 20:08:27 +0000 (23:08 +0300)]
arm64: dts: renesas: r8a77980: add INTC-EX support

Describe the INTC-EX interrupt controller in the R8A77980 device tree.

Based on the original (and large) patch by Vladimir Barinov.

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
3 years agoarm64: dts: renesas: r8a77990: Enable USB3.0 host for Ebisu board
Yoshihiro Shimoda [Wed, 18 Jul 2018 04:54:14 +0000 (13:54 +0900)]
arm64: dts: renesas: r8a77990: Enable USB3.0 host for Ebisu board

This patch adds and USB3.0 host device node and enable it for
R-Car E3 Ebisu board.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
3 years agoarm64: dts: renesas: r8a77995: Add SCIF {0,1,3,4,5} and all HSCIF device nodes
Takeshi Kihara [Tue, 17 Jul 2018 11:42:09 +0000 (13:42 +0200)]
arm64: dts: renesas: r8a77995: Add SCIF {0,1,3,4,5} and all HSCIF device nodes

This patch adds the device nodes for SCIF {0,1,3,4,5} and all HSCIF serial
ports, incl. clocks, power domain and DMAs.

Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
3 years agoARM: dts: at91: fix typos for SSC TD functions
Claudiu Beznea [Tue, 17 Jul 2018 14:03:53 +0000 (17:03 +0300)]
ARM: dts: at91: fix typos for SSC TD functions

Fix typo for TD function of pins PIN_PB22 and PIN_PC14

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
3 years agoARM: dts: add support for Laird SOM60 module and DVK boards
Ben Whitten [Fri, 15 Jun 2018 13:40:55 +0000 (14:40 +0100)]
ARM: dts: add support for Laird SOM60 module and DVK boards

This adds support for Lairds upcoming SOM module, featuring Marvell WiFi
and Bluetooth, 2Gb NAND / 1Gb LPDDR SDRAM, and an Atmel SAMA5D3 CPU.

Signed-off-by: Ben Whitten <ben.whitten@lairdtech.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
3 years agoARM: dts: add support for Gatwick board based on WB50N
Ben Whitten [Fri, 15 Jun 2018 13:40:54 +0000 (14:40 +0100)]
ARM: dts: add support for Gatwick board based on WB50N

Add support for the LoRa gateway from Laird, the RG1xx.
This board houses the WB50NBT CPU module along with a Semtech SX1301 based
concentrator card.
https://www.lairdtech.com/products/rg1xx-lora-gateway

Signed-off-by: Ben Whitten <ben.whitten@lairdtech.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
3 years agoARM: dts: add support for Laird WB50N cpu module and DVK
Ben Whitten [Fri, 15 Jun 2018 13:40:53 +0000 (14:40 +0100)]
ARM: dts: add support for Laird WB50N cpu module and DVK

This adds support for Lairds CPU module, featuring Atheros wifi, CSR
Bluetooth and, Atmel SAMA5D3 CPU.
https://www.lairdtech.com/products/wb50nbt-wi-fi-bluetooth-module

Signed-off-by: Ben Whitten <ben.whitten@lairdtech.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
3 years agoARM: dts: add support for Laird WB45N cpu module and DVK
Ben Whitten [Fri, 15 Jun 2018 13:40:52 +0000 (14:40 +0100)]
ARM: dts: add support for Laird WB45N cpu module and DVK

This adds support for Lairds combo CPU module, featuring on board
Atheros wifi, CSR Bluetooth radio and, Atmel CPU.
https://www.lairdtech.com/products/wb45nbt

Signed-off-by: Ben Whitten <ben.whitten@lairdtech.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
3 years agoARM: dts: at91: add labels to soc dtsi for derivative boards
Ben Whitten [Fri, 15 Jun 2018 13:40:51 +0000 (14:40 +0100)]
ARM: dts: at91: add labels to soc dtsi for derivative boards

This adds labels to commonly used device-tree nodes so that derivative
boards can avoid ahb/apb hierarchy.

Signed-off-by: Ben Whitten <ben.whitten@lairdtech.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
3 years agoARM: dts: zynq: Remove #address/#size-cells from gpio-keys
Michal Simek [Tue, 17 Jul 2018 14:53:32 +0000 (16:53 +0200)]
ARM: dts: zynq: Remove #address/#size-cells from gpio-keys

dts reports incorrect usage of these properties in gpio-keys node.
Warning (avoid_unnecessary_addr_size): /gpio-keys: unnecessary

The patch is removing these useless properties.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
3 years agoARM: dts: zynq: Add LEDs to the Zybo Z7 board
Luis Araneda [Thu, 12 Jul 2018 05:50:48 +0000 (01:50 -0400)]
ARM: dts: zynq: Add LEDs to the Zybo Z7 board

Add an LED node, connected to the Processing System (PS)

Signed-off-by: Luis Araneda <luaraneda@gmail.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
3 years agoARM: dts: zynq: Use gpio constants for the Zybo Z7 board
Luis Araneda [Thu, 12 Jul 2018 05:50:47 +0000 (01:50 -0400)]
ARM: dts: zynq: Use gpio constants for the Zybo Z7 board

Include GPIO dt-bindings and use GPIO_ACTIVE_* constants
to improve readability

Signed-off-by: Luis Araneda <luaraneda@gmail.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
3 years agoARM: dts: zynq: Fix memory size on the Zybo Z7 board
Luis Araneda [Thu, 12 Jul 2018 05:50:46 +0000 (01:50 -0400)]
ARM: dts: zynq: Fix memory size on the Zybo Z7 board

According to the reference manual, the board has two Micron
MT41K256M16HA-125 DDR3L memory ICs, which have 512 MiB each

Tested on a ZYBO-Z7-20 board

Signed-off-by: Luis Araneda <luaraneda@gmail.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
3 years agodt-bindings: xilinx: zynq: Add missing boards
Luis Araneda [Thu, 12 Jul 2018 04:10:24 +0000 (00:10 -0400)]
dt-bindings: xilinx: zynq: Add missing boards

The bindings were missing when the device-tree
files were added

Signed-off-by: Luis Araneda <luaraneda@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
3 years agodt-bindings: xilinx: zynq: Move Paralella board to Xilinx
Luis Araneda [Thu, 12 Jul 2018 04:10:23 +0000 (00:10 -0400)]
dt-bindings: xilinx: zynq: Move Paralella board to Xilinx

Move the Adapteva Parallela board to Xilinx dt-bindings,
as it's based on a Zynq SoC from Xilinx

Signed-off-by: Luis Araneda <luaraneda@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
3 years agodt-bindings: xilinx: zynq: Sort entries alphabetically
Luis Araneda [Thu, 12 Jul 2018 04:10:22 +0000 (00:10 -0400)]
dt-bindings: xilinx: zynq: Sort entries alphabetically

Sort additional compatible strings (boards) alphabetically
by their manufacturer and model number

This will help when finding a board because they
will be grouped by their manufacturer

Signed-off-by: Luis Araneda <luaraneda@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
3 years agodt-bindings: xilinx: zynq: Improve boards description
Luis Araneda [Thu, 12 Jul 2018 04:10:21 +0000 (00:10 -0400)]
dt-bindings: xilinx: zynq: Improve boards description

Change the description of some boards to make it similar
to the value of the model property from their respective
device-tree, using the format "<manufacturer> <model>"

Signed-off-by: Luis Araneda <luaraneda@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
3 years agoARM: dts: zynq: correct and improve the model property of dt files
Luis Araneda [Thu, 12 Jul 2018 04:10:20 +0000 (00:10 -0400)]
ARM: dts: zynq: correct and improve the model property of dt files

Replace the current value of the model property by a more accurate
description of each board (which includes the manufacturer), as some
of the boards had the same value ("Xilinx Zynq")

Signed-off-by: Luis Araneda <luaraneda@gmail.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
3 years agoARM: dts: zynq: Set correct manufacturer for ZedBoard and MicroZed boards
Luis Araneda [Thu, 12 Jul 2018 04:10:19 +0000 (00:10 -0400)]
ARM: dts: zynq: Set correct manufacturer for ZedBoard and MicroZed boards

Both boards are made by Avnet, Inc. So add an additional
value to the compatible property

Signed-off-by: Luis Araneda <luaraneda@gmail.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
3 years agoARM: dts: zynq: Add mmc alias for zc702/zc706/zed/zybo
Michal Simek [Thu, 7 Apr 2016 09:23:34 +0000 (11:23 +0200)]
ARM: dts: zynq: Add mmc alias for zc702/zc706/zed/zybo

Add missing mmc alias.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
3 years agoARM: dts: zynq: Add support for Z-turn board
Anton Gerasimov [Wed, 28 Mar 2018 14:17:34 +0000 (16:17 +0200)]
ARM: dts: zynq: Add support for Z-turn board

Add a dts for MYIR Z-turn board and respective target in Makefile.

Signed-off-by: Anton Gerasimov <tossel@gmail.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
3 years agoarm64: dts: zynqmp: Add support for Avnet Ultra96 rev1 board
Michal Simek [Wed, 2 May 2018 11:14:35 +0000 (13:14 +0200)]
arm64: dts: zynqmp: Add support for Avnet Ultra96 rev1 board

Avnet Ultra96 rev1 board is commercialized Xilinx zcu100 revC/D
internal board. The patch is reusing zcu100 revC files but changing
model description and compatible strings which are used for example by
libmraa.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
3 years agoarm64: dts: zynqmp: Remove #address/#size-cells from gpio-keys
Michal Simek [Wed, 2 May 2018 11:29:00 +0000 (13:29 +0200)]
arm64: dts: zynqmp: Remove #address/#size-cells from gpio-keys

dts reports incorrect usage of these properties in gpio-keys node.
Warning (avoid_unnecessary_addr_size): /gpio-keys: unnecessary

The patch is removing these useless properties.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
3 years agoarm64: dts: zynqmp: Remove ep108 board
Michal Simek [Fri, 2 Mar 2018 07:45:16 +0000 (08:45 +0100)]
arm64: dts: zynqmp: Remove ep108 board

ZynqMP Emulation board is no longer tested and there is no reason to
keep maintaining it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
3 years agoarm64: dts: zynqmp: Use serdev for zcu100 BT
Michal Simek [Mon, 12 Mar 2018 15:12:33 +0000 (16:12 +0100)]
arm64: dts: zynqmp: Use serdev for zcu100 BT

Mainline started to use serdev interface for uart attached devices.
Change description to reflect it.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
3 years agoARM: dts: imx6dl-mamoj: Add usb host and device support
Michael Trimarchi [Tue, 17 Jul 2018 09:25:26 +0000 (14:55 +0530)]
ARM: dts: imx6dl-mamoj: Add usb host and device support

Add USB host and device support for BTicino i.MX6DL Mamoj board.

Signed-off-by: Simone CIANNI <simone.cianni@bticino.it>
Signed-off-by: Raffaele RECALCATI <raffaele.recalcati@bticino.it>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
3 years agoARM: dts: imx6dl-mamoj: Add Wifi support
Jagan Teki [Tue, 17 Jul 2018 09:25:25 +0000 (14:55 +0530)]
ARM: dts: imx6dl-mamoj: Add Wifi support

Add TI WL18XX Wifi for BTicino i.MX6DL board.

Signed-off-by: Simone CIANNI <simone.cianni@bticino.it>
Signed-off-by: Raffaele RECALCATI <raffaele.recalcati@bticino.it>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
3 years agoARM: dts: imx6dl-mamoj: Add parallel display support
Jagan Teki [Tue, 17 Jul 2018 09:25:24 +0000 (14:55 +0530)]
ARM: dts: imx6dl-mamoj: Add parallel display support

This patch adds parallel display support for i.MX6DL Mamoj board
along with relevant backlight through pwm.

LCD power sequence is added by 'Michael Trimarchi'.

Signed-off-by: Simone CIANNI <simone.cianni@bticino.it>
Signed-off-by: Raffaele RECALCATI <raffaele.recalcati@bticino.it>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
3 years agoARM: dts: vf610: Add ZII SSMB SPU3 board
Andrey Smirnov [Tue, 17 Jul 2018 04:06:51 +0000 (21:06 -0700)]
ARM: dts: vf610: Add ZII SSMB SPU3 board

Add support for Zodiac Inflight Innovations SSMB SPU3
board (VF610-based).

Cc: linux-arm-kernel@lists.infradead.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Tested-by: Chris Healy <cphealy@gmail.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
3 years agoarm64: dts: uniphier: add headphone detect gpio for LD11 global board
Katsuhiro Suzuki [Mon, 25 Jun 2018 03:45:05 +0000 (12:45 +0900)]
arm64: dts: uniphier: add headphone detect gpio for LD11 global board

This patch adds GPIO for headphone detection on LD11 global board.

Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
3 years agoarm64: dts: uniphier: add headphone detect gpio for LD20 global board
Katsuhiro Suzuki [Mon, 25 Jun 2018 03:45:04 +0000 (12:45 +0900)]
arm64: dts: uniphier: add headphone detect gpio for LD20 global board

This patch adds GPIO for headphone detection on LD20 global board.

Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
3 years agoarm64: dts: uniphier: Add missing cooling device properties for CPUs
Viresh Kumar [Fri, 25 May 2018 05:40:06 +0000 (11:10 +0530)]
arm64: dts: uniphier: Add missing cooling device properties for CPUs

The cooling device properties, like "#cooling-cells" and
"dynamic-power-coefficient", should either be present for all the CPUs
of a cluster or none. If these are present only for a subset of CPUs of
a cluster then things will start falling apart as soon as the CPUs are
brought online in a different order. For example, this will happen
because the operating system looks for such properties in the CPU node
it is trying to bring up, so that it can register a cooling device.

Add such missing properties.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
3 years agoARM: dts: uniphier: Add missing cooling device properties for CPUs
Viresh Kumar [Fri, 25 May 2018 10:31:51 +0000 (16:01 +0530)]
ARM: dts: uniphier: Add missing cooling device properties for CPUs

The cooling device properties, like "#cooling-cells" and
"dynamic-power-coefficient", should either be present for all the CPUs
of a cluster or none. If these are present only for a subset of CPUs of
a cluster then things will start falling apart as soon as the CPUs are
brought online in a different order. For example, this will happen
because the operating system looks for such properties in the CPU node
it is trying to bring up, so that it can register a cooling device.

Add such missing properties.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
3 years agoarm64: dts: ti: Add support for AM654 EVM base board
Nishanth Menon [Tue, 26 Jun 2018 16:26:15 +0000 (11:26 -0500)]
arm64: dts: ti: Add support for AM654 EVM base board

The EValuation Module(EVM) platform for AM654 consists of a
common Base board + one or more of daughter cards, which include:
a) "Personality Modules", which can be specific to a profile, such as
 ICSSG enabled or Multi-media (including audio).
b) SERDES modules, which may be 2 lane PCIe or two port PCIe + USB2
c) Camera daughter card
d) various display panels

Among other options. There are two basic configurations defined which
include an "EVM" configuration and "IDK" (Industrial development kit)
which differ in the specific combination of daughter cards that are
used.

To simplify support, we choose to support just the base board as the
core device tree file and all daughter cards would be expected to be
device tree overlays.

Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
3 years agosoc: ti: Add Support for AM654 SoC config option
Nishanth Menon [Tue, 26 Jun 2018 16:26:14 +0000 (11:26 -0500)]
soc: ti: Add Support for AM654 SoC config option

Add option to build AM6 SoC specific components

Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Benjamin Fair <b-fair@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
3 years agoarm64: dts: ti: Add Support for AM654 SoC
Nishanth Menon [Tue, 26 Jun 2018 16:26:13 +0000 (11:26 -0500)]
arm64: dts: ti: Add Support for AM654 SoC

The AM654 SoC is a lead device of the K3 Multicore SoC architecture
platform, targeted for broad market and industrial control with aim to
meet the complex processing needs of modern embedded products.

Some highlights of this SoC are:
* Quad ARMv8 A53 cores split over two clusters
* GICv3 compliant GIC500
* Configurable L3 Cache and IO-coherent architecture
* Dual lock-step capable R5F uC for safety-critical applications
* High data throughput capable distributed DMA architecture under NAVSS
* Three Gigabit Industrial Communication Subsystems (ICSSG), each with dual
  PRUs and dual RTUs
* Hardware accelerator block containing AES/DES/SHA/MD5 called SA2UL
* Centralized System Controller for Security, Power, and Resource
  management.
* Dual ADCSS, eQEP/eCAP, eHRPWM, dual CAN-FD
* Flash subsystem with OSPI and Hyperbus interfaces
* Multimedia capability with CAL, DSS7-UL, SGX544, McASP
* Peripheral connectivity including USB3, PCIE, MMC/SD, GPMC, I2C, SPI,
  GPIO

See AM65x Technical Reference Manual (SPRUID7, April 2018)
for further details: http://www.ti.com/lit/pdf/spruid7

NOTE:
1. AM654 is the first of the device variants, hence we introduce a
   generic am65.dtsi.
2. We indicate the proper bus topology, the ranges are elaborated in
   each bus segment instead of using the top level ranges to make sure
   that peripherals in each segment use the address space accurately.
3. Peripherals in each bus segment is maintained in a separate dtsi
   allowing for reuse in different bus segment representation from a
   different core such as R5. This is also the reason for maintaining a
   1-1 address map in the ranges.
4. Cache descriptions follow the ARM64 standard description.

Further tweaks may be necessary as we introduce more complex devices,
but can be introduced in context of the device introduction.

Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Benjamin Fair <b-fair@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
3 years agoarm64: Add support for TI's K3 Multicore SoC architecture
Nishanth Menon [Tue, 26 Jun 2018 16:26:12 +0000 (11:26 -0500)]
arm64: Add support for TI's K3 Multicore SoC architecture

Add support for Texas Instrument's K3 Multicore SoC architecture
processors.

Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
3 years agodt-bindings: arm: ti: Add bindings for AM654 SoC
Nishanth Menon [Tue, 26 Jun 2018 16:26:11 +0000 (11:26 -0500)]
dt-bindings: arm: ti: Add bindings for AM654 SoC

The AM654 SoC is a lead device of the K3 Multicore SoC architecture
platform, targeted for broad market and industrial control with aim to
meet the complex processing needs of modern embedded products.

Some highlights of this SoC are:
* Quad ARMv8 A53 cores split over two clusters
* GICv3 compliant GIC500
* Configurable L3 Cache and IO-coherent architecture
* Dual lock-step capable R5F uC for safety-critical applications
* High data throughput capable distributed DMA architecture under NAVSS
* Three Gigabit Industrial Communication Subsystems (ICSSG), each with dual
  PRUs and dual RTUs
* Hardware accelerator block containing AES/DES/SHA/MD5 called SA2UL
* Centralized System Controller for Security, Power, and Resource
  management.
* Dual ADCSS, eQEP/eCAP, eHRPWM, dual CAN-FD
* Flash subsystem with OSPI and Hyperbus interfaces
* Multimedia capability with CAL, DSS7-UL, SGX544, McASP
* Peripheral connectivity including USB3, PCIE, MMC/SD, GPMC, I2C, SPI,
  GPIO

See AM65x Technical Reference Manual (SPRUID7, April 2018)
for further details: http://www.ti.com/lit/pdf/spruid7

Reviewed-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
3 years agoarm64: dts: hisilicon: Add missing cooling device properties for CPUs
Viresh Kumar [Fri, 25 May 2018 05:40:03 +0000 (11:10 +0530)]
arm64: dts: hisilicon: Add missing cooling device properties for CPUs

The cooling device properties, like "#cooling-cells" and
"dynamic-power-coefficient", should either be present for all the CPUs
of a cluster or none. If these are present only for a subset of CPUs of
a cluster then things will start falling apart as soon as the CPUs are
brought online in a different order. For example, this will happen
because the operating system looks for such properties in the CPU node
it is trying to bring up, so that it can register a cooling device.

Add such missing properties.

Do minor rearrangement as well to keep ordering consistent.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
3 years agoarm64: hikey960: update idle-states
Vincent Guittot [Wed, 11 Jul 2018 08:34:46 +0000 (10:34 +0200)]
arm64: hikey960: update idle-states

Update entry/exit latency and residency time of hikey960 to use more
realistic figures based on unitary tests done on the platform.

The complete results (in us) :
                  big cluster
                  cluster  CPU
max entry latency     800  400
max exit latency     2900  550
residency  903Mhz    5000 1500
residency 2363Mhz       0 1500

                  little cluster
                  cluster  CPU
max entry latency     500  400
max exit latency     1600  650
residency  533Mhz    8000 4500
residency 1844Mhz       0 1500

We can see that the residency time depends of the running OPP which is not
handled for now. Then we also have to take into account the constraint of
a residency time shorter than the tick to get full advantage of idle loop
reordering(tick is stopped if idle duration is higher than tick period).
Finally the selected residency value are :
                 big cluster
                  cluster  CPU
residency            3700 1500

                  little cluster
                  cluster  CPU
residency            3500 1500

A simple test with a task waking up every 11.111ms shows improvement:
- 5% a lowest OPP
- 22% at highest OPP

The period has been chosen:
- to be shorter than old cluster residency time and longer than new
residency time of cluster off C-state
- to prevent any sync with tick (4ms) when running tests that can add
some variances between tests

Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
3 years agoarm64: dts: hikey: Remove keep-power-in-suspend property
oscardagrach [Fri, 13 Jul 2018 16:02:31 +0000 (11:02 -0500)]
arm64: dts: hikey: Remove keep-power-in-suspend property

Remove the keep-power-in-suspend property because it keeps wifi power
on during suspend. This property is only required when enabling WoWLAN
and should only be enabled based on need.

Signed-off-by: Ryan Grachek <ryan@edited.us>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
3 years agoarm64: dts: hikey960: Remove keep-power-in-suspend property
oscardagrach [Fri, 13 Jul 2018 15:53:48 +0000 (10:53 -0500)]
arm64: dts: hikey960: Remove keep-power-in-suspend property

Remove the keep-power-in-suspend property because it keeps wifi power
on during suspend. This property is only required when enabling WoWLAN
and should only be enabled based on need. Also remove dupplicate property

Signed-off-by: Ryan Grachek <ryan@edited.us>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
3 years agoarm64: dts: hikey960: Clean up MMC properties and move to proper file
oscardagrach [Mon, 18 Jun 2018 18:10:08 +0000 (13:10 -0500)]
arm64: dts: hikey960: Clean up MMC properties and move to proper file

Certain properties should be moved to the board file to reflect
the specific properties of the board, and not the SoC. Move these
properties to proper location and organize properties in both files.

Signed-off-by: Ryan Grachek <ryan@edited.us>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
3 years agoarm64: dts: hikey960: Remove deprecated MMC properties
oscardagrach [Mon, 18 Jun 2018 18:08:25 +0000 (13:08 -0500)]
arm64: dts: hikey960: Remove deprecated MMC properties

Remove deprecated MMC properties for hi3660

Signed-off-by: Ryan Grachek <ryan@edited.us>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
3 years agoARM: dts: am335x: add am335x-sancloud-bbe board support
Koen Kooi [Tue, 17 Jul 2018 06:51:49 +0000 (08:51 +0200)]
ARM: dts: am335x: add am335x-sancloud-bbe board support

The "Beaglebone Enhanced" by Sancloud is based on the Beaglebone Black,
but with the following differences:

 * Gigabit capable PHY
 * Extra USB hub, optional i2c control
 * lps3331ap barometer connected over i2c
 * MPU6050 6 axis MEMS accelerometer/gyro connected over i2c
 * 1GiB DDR3 RAM
 * RTL8723 Wifi/Bluetooth connected over USB

Tested on a revision G board.

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
3 years agodt-bindings: Add vendor prefix for Sancloud
Koen Kooi [Tue, 17 Jul 2018 07:40:58 +0000 (09:40 +0200)]
dt-bindings: Add vendor prefix for Sancloud

Add vendor prefix for Sancloud Ltd.

Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
3 years agoARM: dts: imx6ul-pico-hobbit: Do not hardcode the memory size
Fabio Estevam [Tue, 17 Jul 2018 02:08:45 +0000 (23:08 -0300)]
ARM: dts: imx6ul-pico-hobbit: Do not hardcode the memory size

There are two variants of imx6ul-pico boards: one with 256MB and
another one with 512MB of RAM.

Do not hardcode the memory size in the device tree and let the
bootloader fill the correct value instead.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
3 years agoARM: dts: imx6sl-evk: make pfuze100 sw4 always on
Robin Gong [Tue, 17 Jul 2018 05:12:05 +0000 (13:12 +0800)]
ARM: dts: imx6sl-evk: make pfuze100 sw4 always on

On i.MX6SL EVK board, pfuze100 sw4 supplies
LPDDR2 which is critical for system, must be
always on.

Signed-off-by: Robin Gong <yibin.gong@nxp.com>
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
3 years agoARM: dts: imx6sll-evk: make pfuze100 sw4 always on
Anson Huang [Tue, 17 Jul 2018 05:12:04 +0000 (13:12 +0800)]
ARM: dts: imx6sll-evk: make pfuze100 sw4 always on

On i.MX6SLL EVK board, pfuze100 sw4 supplies
LPDDR3 which is critical for system, must be
always on.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
3 years agoARM: dts: imx6sx-sdb-reva: make pfuze100 sw4 always on
Anson Huang [Tue, 17 Jul 2018 05:12:03 +0000 (13:12 +0800)]
ARM: dts: imx6sx-sdb-reva: make pfuze100 sw4 always on

On i.MX6SX SDB Rev-A board, pfuze100 sw4 supplies
csi, audio codec and i2c etc., these modules do NOT
implement power domain control, so pfuze100 sw4
needs to be always on to make sure these modules
work normally.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
3 years agoARM: dts: imx6qdl-sabresd: make pfuze100 sw4 always on
Anson Huang [Tue, 17 Jul 2018 05:12:02 +0000 (13:12 +0800)]
ARM: dts: imx6qdl-sabresd: make pfuze100 sw4 always on

On i.MX6QDL Sabre-SD board, pfuze100 sw4 supplies
GPS, touch and RGMII etc., these modules do NOT
implement power domain control, so pfuze100 sw4
needs to be always on to make sure these modules
work normally.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
3 years agoARM: dts: Add DT support for Octavo Systems OSD3358-SM-RED based on TI AM335x
Neeraj Dantu [Fri, 13 Jul 2018 16:33:14 +0000 (16:33 +0000)]
ARM: dts: Add DT support for Octavo Systems OSD3358-SM-RED based on TI AM335x

OSD3358-SM-RED is a dev board for OSD335x System-in-Package(SiP) devices from
Octavo Systems.

This board family can be indentified by the A335BNLTOS00 in the at24 eeprom:
A2: [aa 55 33 ee 41 33 33 35  42 4e 4c 54 4f 53 30 30 |.U3.A335BNLTOS00|]

https://octavosystems.com/octavo_products/osd3358-sm-red/

Signed-off-by: Neeraj Dantu <neeraj.dantu@octavosystems.com>
CC: Tony Lindgren <tony@atomide.com>
CC: Robert Nelson <robertcnelson@gmail.com>
CC: Jason Kridner <jkridner@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
3 years agoARM: dts: imx6sl-evk: add missing GPIO iomux setting
Anson Huang [Sat, 14 Jul 2018 01:53:58 +0000 (09:53 +0800)]
ARM: dts: imx6sl-evk: add missing GPIO iomux setting

On i.MX6SL EVK board, the MX6SL_PAD_KEY_ROW5 pin is
used as lcd 3v3 regulator control pin, need to make
sure MX6SL_PAD_KEY_ROW5 is muxed as GPIO function
for controlling lcd 3v3 regulator.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by; Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
3 years agoARM: dts: imx51-zii-scu3-esb: Fix RAVE SP watchdog compatible string
Andrey Smirnov [Tue, 17 Jul 2018 06:44:38 +0000 (14:44 +0800)]
ARM: dts: imx51-zii-scu3-esb: Fix RAVE SP watchdog compatible string

It looks like I made a nasty typo in the original patch which resulted
in missing watchdog device. Fix it.

Cc: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: cphealy@gmail.com
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
3 years agoARM: dts: imx51-zii-scu3-esb: Add switch IRQ line pinumx config
Andrey Smirnov [Fri, 13 Jul 2018 17:30:04 +0000 (10:30 -0700)]
ARM: dts: imx51-zii-scu3-esb: Add switch IRQ line pinumx config

Instead of relying on default values, configure PAD_AUD3_BB_CK to be a
GPIO explicitly. While at, it change the pad configuration to enable
a 100K pull-down (the pin is used as IRQ_TYPE_LEVEL_HIGH).

Cc: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: cphealy@gmail.com
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
3 years agoARM: dts: imx6sx-nitrogen6sx: remove obsolete display configuration
Gary Bisson [Fri, 13 Jul 2018 12:49:04 +0000 (14:49 +0200)]
ARM: dts: imx6sx-nitrogen6sx: remove obsolete display configuration

This display configuration isn't working as-is as it depends on the
tfp410 LCD to HDMI bridge. This will need to be updated later once
the DRM MXSFB driver will be the default.

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
3 years agoARM: dts: imx7d-nitrogen7: use OF graph to describe the display
Gary Bisson [Fri, 13 Jul 2018 12:49:03 +0000 (14:49 +0200)]
ARM: dts: imx7d-nitrogen7: use OF graph to describe the display

To make use of the new eLCDIF DRM driver OF graph description is
required. Describe the display using OF graph nodes.

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
3 years agoARM: dts: imx: Switch Boundary Devices boards to SPDX identifier
Gary Bisson [Fri, 13 Jul 2018 12:49:02 +0000 (14:49 +0200)]
ARM: dts: imx: Switch Boundary Devices boards to SPDX identifier

Adopt the SPDX license identifier headers to ease license compliance
management.

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
3 years agoARM: dts: imx6sl: Add vivante gpu nodes
Leonard Crestez [Fri, 13 Jul 2018 09:39:35 +0000 (12:39 +0300)]
ARM: dts: imx6sl: Add vivante gpu nodes

The imx6sl soc has gpu_2d and gpu_vg, no 3d support:

etnaviv-gpu 2200000.gpu: model: GC320, revision: 5007
etnaviv-gpu 2204000.gpu: model: GC355, revision: 1215

The IP blocks seem to be already supported.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
3 years agoARM: dts: imx6sll-evk: enable SEIKO 43WVF1G lcdif panel
Anson Huang [Fri, 13 Jul 2018 07:58:27 +0000 (15:58 +0800)]
ARM: dts: imx6sll-evk: enable SEIKO 43WVF1G lcdif panel

Enable SEIKO 43WVF1G lcdif panel for DRM driver,
add necessary properties according to SEIKO 43WVF1G
driver's requirement, such as "dvdd-supply", "avdd-supply"
and "backlight" etc..

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
3 years agoARM: dts: imx6sll-evk: correct lcd regulator GPIO pin
Anson Huang [Fri, 13 Jul 2018 07:58:26 +0000 (15:58 +0800)]
ARM: dts: imx6sll-evk: correct lcd regulator GPIO pin

On i.MX6SLL EVK board, lcd regulator is controlled
by GPIO4 IO03 using MX6SLL_PAD_KEY_ROW5__GPIO4_IO03 pin,
NOT MX6SLL_PAD_ECSPI1_SCLK__GPIO4_IO08, correct it.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
3 years agoARM: dts: imx6sll-evk: enable PWM1 for backlight driver
Anson Huang [Fri, 13 Jul 2018 07:58:25 +0000 (15:58 +0800)]
ARM: dts: imx6sll-evk: enable PWM1 for backlight driver

Enable pwm1 module on i.MX6SLL EVK board to make
backlight driver really work with LCD panel connected.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
3 years agoARM: dts: imx51-zii-rdu1: Enable secure-reg-access
Fabio Estevam [Thu, 12 Jul 2018 13:02:38 +0000 (10:02 -0300)]
ARM: dts: imx51-zii-rdu1: Enable secure-reg-access

Add 'secure-reg-access' property to enable PMU and hardware counters
so that they can be properly used with the 'perf' tool.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
3 years agoARM: dts: imx51-babbage: Enable secure-reg-access
Fabio Estevam [Thu, 12 Jul 2018 13:02:37 +0000 (10:02 -0300)]
ARM: dts: imx51-babbage: Enable secure-reg-access

Add 'secure-reg-access' property to enable PMU and hardware counters
so that they can be properly used with the 'perf' tool.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
3 years agoARM: dts: imx53-ppd: Enable secure-reg-access
Sebastian Reichel [Thu, 12 Jul 2018 13:02:36 +0000 (10:02 -0300)]
ARM: dts: imx53-ppd: Enable secure-reg-access

Add 'secure-reg-access' property to enable PMU and hardware counters
so that they can be properly used with the 'perf' tool.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
[fabio: kept the change only in imx53-ppd context]
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
3 years agoARM: dts: imx6ul: Add DTS for ConnectCore 6UL SBC Express
Alex Gonzalez [Thu, 12 Jul 2018 08:20:36 +0000 (10:20 +0200)]
ARM: dts: imx6ul: Add DTS for ConnectCore 6UL SBC Express

The ConnectCore 6UL Single Board Computer (SBC) Express contains the
ConnectCore 6UL System-On-Module.

Its hardware specifications are:

* 256MB DDR3 memory
* 256MB NAND flash
* Single Ethernet
* USB Host and USB-OTG
* MicroSD external storage
* Groove connectors and Raspberry Pi Hat compatible expansion header

Signed-off-by: Alex Gonzalez <alex.gonzalez@digi.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>