muen/linux.git
3 years agoMerge tag 'wireless-drivers-next-for-davem-2018-03-24' of git://git.kernel.org/pub...
David S. Miller [Mon, 26 Mar 2018 01:27:38 +0000 (21:27 -0400)]
Merge tag 'wireless-drivers-next-for-davem-2018-03-24' of git://git./linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers-next patches for 4.17

The biggest changes are the bluetooth related patches to the rsi
driver. It adds a new bluetooth driver which communicates directly
with the wireless driver and the interface is defined in
include/net/rsi_91x.h.

Major changes:

wl1251

* read the MAC address from the NVS file

rtlwifi

* enable mac80211 fast-tx support

mt76

* add capability to select tx/rx antennas

mt7601

* let mac80211 validate rx CCMP Packet Number (PN)

rsi

* bluetooth: add new btrsi driver

* btcoex support with the new btrsi driver
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agotipc: tipc_disc_addr_trial_msg() can be static
kbuild test robot [Fri, 23 Mar 2018 19:47:42 +0000 (03:47 +0800)]
tipc: tipc_disc_addr_trial_msg() can be static

Fixes: 25b0b9c4e835 ("tipc: handle collisions of 32-bit node address hash values")
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Acked-by: Jon Maloy jon.maloy@ericsson.com
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoibmvnic: Potential NULL dereference in clean_one_tx_pool()
Dan Carpenter [Fri, 23 Mar 2018 11:36:15 +0000 (14:36 +0300)]
ibmvnic: Potential NULL dereference in clean_one_tx_pool()

There is an && vs || typo here, which potentially leads to a NULL
dereference.

Fixes: e9e1e97884b7 ("ibmvnic: Update TX pool cleaning routine")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agocxgb4: support new ISSI flash parts
Ganesh Goudar [Fri, 23 Mar 2018 11:35:49 +0000 (17:05 +0530)]
cxgb4: support new ISSI flash parts

Add support for new 32MB and 64MB ISSI (Integrated Silicon
Solution, Inc.) FLASH parts.

Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agocxgb4: depend on firmware event for link status
Ganesh Goudar [Fri, 23 Mar 2018 11:33:10 +0000 (17:03 +0530)]
cxgb4: depend on firmware event for link status

Depend on the firmware sending us link status changes,
rather than assuming that the link goes down upon L1
configuration.

Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agocxgb4: copy vlan_id in ndo_get_vf_config
Arjun Vynipadath [Fri, 23 Mar 2018 10:18:46 +0000 (15:48 +0530)]
cxgb4: copy vlan_id in ndo_get_vf_config

Copy vlan_id to get it displayed in vf info.

Signed-off-by: Arjun Vynipadath <arjun@chelsio.com>
Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Ganesh Goudhar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agocxgb4: Setup FW queues before registering netdev
Arjun Vynipadath [Fri, 23 Mar 2018 09:55:10 +0000 (15:25 +0530)]
cxgb4: Setup FW queues before registering netdev

When NetworkManager is enabled, there are chances that interface up
is called even before probe completes. This means we have not yet
allocated the FW sge queues, hence rest of ingress queue allocation
wont be proper. Fix this by calling setup_fw_sge_queues() before
register_netdev().

Fixes: 0fbc81b3ad51 ('chcr/cxgb4i/cxgbit/RDMA/cxgb4: Allocate resources dynamically for all cxgb4 ULD's')
Signed-off-by: Arjun Vynipadath <arjun@chelsio.com>
Signed-off-by: Casey Leedom <leedom@chelsio.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoMerge branch 'broadcom-Adaptive-interrupt-coalescing'
David S. Miller [Mon, 26 Mar 2018 00:48:26 +0000 (20:48 -0400)]
Merge branch 'broadcom-Adaptive-interrupt-coalescing'

Florian Fainelli says:

====================
net: broadcom: Adaptive interrupt coalescing

This patch series adds adaptive interrupt coalescing for the Gigabit Ethernet
drivers SYSTEMPORT and GENET.

This really helps lower the interrupt count and system load, as measured by
vmstat for a Gigabit TCP RX session:

SYSTEMPORT:

without:

 1  0      0 192188      0  25472    0    0     0     0 122100 38870  1 42 57  0  0
[ ID] Interval       Transfer     Bandwidth
[  4]  0.0-10.0 sec  1.03 GBytes   884 Mbits/sec

with:

 1  0      0 192288      0  25468    0    0     0     0 58806 44401  0 100  0  0  0
[  5]  0.0-10.0 sec  1.04 GBytes   888 Mbits/sec

GENET:

without:

 1  0      0 1170404      0  25420    0    0     0     0 130785 63402  2 85 12  0  0
[ ID] Interval       Transfer     Bandwidth
[  4]  0.0-10.0 sec  1.04 GBytes   888 Mbits/sec

with:

 1  0      0 1170560      0  25420    0    0     0     0 50610 48477  0 100  0  0  0
[  5]  0.0-10.0 sec  1.05 GBytes   899 Mbits/sec

Please look at the implementation and let me know if you see any problems, this
was largely inspired by bnxt_en.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: bcmgenet: Add support for adaptive RX coalescing
Florian Fainelli [Fri, 23 Mar 2018 01:19:33 +0000 (18:19 -0700)]
net: bcmgenet: Add support for adaptive RX coalescing

Unlike the moder modern SYSTEMPORT hardware, we do not have a
configurable TDMA timeout, which limits us to implement adaptive RX
interrupt coalescing only. We have each of our RX rings implement a
bcmgenet_net_dim structure which holds an interrupt counter, number of
packets, bytes, and a container for a net_dim instance.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: systemport: Implement adaptive interrupt coalescing
Florian Fainelli [Fri, 23 Mar 2018 01:19:32 +0000 (18:19 -0700)]
net: systemport: Implement adaptive interrupt coalescing

Implement support for adaptive RX and TX interrupt coalescing using
net_dim. We have each of our TX ring and our single RX ring implement a
bcm_sysport_net_dim structure which holds an interrupt counter, number
of packets, bytes, and a container for a net_dim instance.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoMerge branch 'mv88e6xxx-module-reloading'
David S. Miller [Mon, 26 Mar 2018 00:43:42 +0000 (20:43 -0400)]
Merge branch 'mv88e6xxx-module-reloading'

Andrew Lunn says:

====================
Fixes to allow mv88e6xxx module to be reloaded

As reported by Uwe Kleine-König, the interrupt trigger is first
configured by DT and then reconfigured to edge. This results in a
failure on EPROBE_DEFER, or if the module is unloaded and reloaded.

A second crash happens on module reload due to a missing call to the
common IRQ free code when using polled interrupts.

With these fixes in place, it becomes possible to load and unload the
kernel modules a few times without it crashing.

v2: Fix the ü in Künig a couple of times
v3: But the ü should be an ö!
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: dsa: mv88e6xxx: Call the common IRQ free code
Andrew Lunn [Sun, 25 Mar 2018 21:43:15 +0000 (23:43 +0200)]
net: dsa: mv88e6xxx: Call the common IRQ free code

When free'ing the polled IRQs, call the common irq free code.
Otherwise the interrupts are left registered, and when we come to load
the driver a second time, we get an Opps.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: dsa: mv88e6xxx: Use the DT IRQ trigger mode
Andrew Lunn [Sun, 25 Mar 2018 21:43:14 +0000 (23:43 +0200)]
net: dsa: mv88e6xxx: Use the DT IRQ trigger mode

By calling request_threaded_irq() with the flag IRQF_TRIGGER_FALLING
we override the trigger mode provided in device tree. And the
interrupt is actually active low, which is what all the current device
tree descriptions use.

Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agotc-testing: updated police, mirred, skbedit and skbmod with more tests
Roman Mashak [Sun, 25 Mar 2018 21:20:06 +0000 (17:20 -0400)]
tc-testing: updated police, mirred, skbedit and skbmod with more tests

Added extra test cases for control actions (reclassify, pipe etc.),
cookies, max index value and police args sanity check.

Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoMerge branch 'hv_netvsc-Fix-improve-RX-path-error-handling'
David S. Miller [Sun, 25 Mar 2018 21:07:41 +0000 (17:07 -0400)]
Merge branch 'hv_netvsc-Fix-improve-RX-path-error-handling'

Haiyang Zhang says:

====================
hv_netvsc: Fix/improve RX path error handling

Fix the status code returned to the host. Also add range
check for rx packet offset and length.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agohv_netvsc: Add range checking for rx packet offset and length
Haiyang Zhang [Thu, 22 Mar 2018 19:01:14 +0000 (12:01 -0700)]
hv_netvsc: Add range checking for rx packet offset and length

This patch adds range checking for rx packet offset and length.
It may only happen if there is a host side bug.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agohv_netvsc: Fix the return status in RX path
Haiyang Zhang [Thu, 22 Mar 2018 19:01:13 +0000 (12:01 -0700)]
hv_netvsc: Fix the return status in RX path

As defined in hyperv_net.h, the NVSP_STAT_SUCCESS is one not zero.
Some functions returns 0 when it actually means NVSP_STAT_SUCCESS.
This patch fixes them.

In netvsc_receive(), it puts the last RNDIS packet's receive status
for all packets in a vmxferpage which may contain multiple RNDIS
packets.
This patch puts NVSP_STAT_FAIL in the receive completion if one of
the packets in a vmxferpage fails.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoMerge branch 'net-permit-skb_segment-on-head_frag-frag_list-skb'
David S. Miller [Sun, 25 Mar 2018 20:46:05 +0000 (16:46 -0400)]
Merge branch 'net-permit-skb_segment-on-head_frag-frag_list-skb'

Yonghong Song says:

====================
net: permit skb_segment on head_frag frag_list skb

One of our in-house projects, bpf-based NAT, hits a kernel BUG_ON at
function skb_segment(), line 3667. The bpf program attaches to
clsact ingress, calls bpf_skb_change_proto to change protocol
from ipv4 to ipv6 or from ipv6 to ipv4, and then calls bpf_redirect
to send the changed packet out.
 ...
    3665                 while (pos < offset + len) {
    3666                         if (i >= nfrags) {
    3667                                 BUG_ON(skb_headlen(list_skb));
 ...

The triggering input skb has the following properties:
    list_skb = skb->frag_list;
    skb->nfrags != NULL && skb_headlen(list_skb) != 0
and skb_segment() is not able to handle a frag_list skb
if its headlen (list_skb->len - list_skb->data_len) is not 0.

Patch #1 provides a simple solution to avoid BUG_ON. If
list_skb->head_frag is true, its page-backed frag will
be processed before the list_skb->frags.
Patch #2 provides a test case in test_bpf module which
constructs a skb and calls skb_segment() directly. The test
case is able to trigger the BUG_ON without Patch #1.

The patch has been tested in the following setup:
  ipv6_host <-> nat_server <-> ipv4_host
where nat_server has a bpf program doing ipv4<->ipv6
translation and forwarding through clsact hook
bpf_skb_change_proto.

Changelog:
v5 -> v6:
  . Added back missed BUG_ON(!nfrags) for zero
    skb_headlen(skb) case, plus a couple of
    cosmetic changes, from Alexander.
v4 -> v5:
  . Replace local variable head_frag with
    a static inline function skb_head_frag_to_page_desc
    which gets the head_frag on-demand. This makes
    code more readable and also does not increase
    the stack size, from Alexander.
  . Remove the "if(nfrags)" guard for skb_orphan_frags
    and skb_zerocopy_clone as I found that they can
    handle zero-frag skb (with non-zero skb_headlen(skb))
    properly.
  . Properly release segment list from skb_segment()
    in the test, from Eric.
v3 -> v4:
  . Remove dynamic memory allocation and use rewinding
    for both index and frag to remove one branch in fast path,
    from Alexander.
  . Fix a bunch of issues in test_bpf skb_segment() test,
    including proper way to allocate skb, proper function
    argument for skb_add_rx_frag and not freeint skb, etc.,
    from Eric.
v2 -> v3:
  . Use starting frag index -1 (instead of 0) to
    special process head_frag before other frags in the skb,
    from Alexander Duyck.
v1 -> v2:
  . Removed never-hit BUG_ON, spotted by Linyu Yuan.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: bpf: add a test for skb_segment in test_bpf module
Yonghong Song [Wed, 21 Mar 2018 23:31:04 +0000 (16:31 -0700)]
net: bpf: add a test for skb_segment in test_bpf module

Without the previous commit,
"modprobe test_bpf" will have the following errors:
...
[   98.149165] ------------[ cut here ]------------
[   98.159362] kernel BUG at net/core/skbuff.c:3667!
[   98.169756] invalid opcode: 0000 [#1] SMP PTI
[   98.179370] Modules linked in:
[   98.179371]  test_bpf(+)
...
which triggers the bug the previous commit intends to fix.

The skbs are constructed to mimic what mlx5 may generate.
The packet size/header may not mimic real cases in production. But
the processing flow is similar.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: permit skb_segment on head_frag frag_list skb
Yonghong Song [Wed, 21 Mar 2018 23:31:03 +0000 (16:31 -0700)]
net: permit skb_segment on head_frag frag_list skb

One of our in-house projects, bpf-based NAT, hits a kernel BUG_ON at
function skb_segment(), line 3667. The bpf program attaches to
clsact ingress, calls bpf_skb_change_proto to change protocol
from ipv4 to ipv6 or from ipv6 to ipv4, and then calls bpf_redirect
to send the changed packet out.

3472 struct sk_buff *skb_segment(struct sk_buff *head_skb,
3473                             netdev_features_t features)
3474 {
3475         struct sk_buff *segs = NULL;
3476         struct sk_buff *tail = NULL;
...
3665                 while (pos < offset + len) {
3666                         if (i >= nfrags) {
3667                                 BUG_ON(skb_headlen(list_skb));
3668
3669                                 i = 0;
3670                                 nfrags = skb_shinfo(list_skb)->nr_frags;
3671                                 frag = skb_shinfo(list_skb)->frags;
3672                                 frag_skb = list_skb;
...

call stack:
...
 #1 [ffff883ffef03558] __crash_kexec at ffffffff8110c525
 #2 [ffff883ffef03620] crash_kexec at ffffffff8110d5cc
 #3 [ffff883ffef03640] oops_end at ffffffff8101d7e7
 #4 [ffff883ffef03668] die at ffffffff8101deb2
 #5 [ffff883ffef03698] do_trap at ffffffff8101a700
 #6 [ffff883ffef036e8] do_error_trap at ffffffff8101abfe
 #7 [ffff883ffef037a0] do_invalid_op at ffffffff8101acd0
 #8 [ffff883ffef037b0] invalid_op at ffffffff81a00bab
    [exception RIP: skb_segment+3044]
    RIP: ffffffff817e4dd4  RSP: ffff883ffef03860  RFLAGS: 00010216
    RAX: 0000000000002bf6  RBX: ffff883feb7aaa00  RCX: 0000000000000011
    RDX: ffff883fb87910c0  RSI: 0000000000000011  RDI: ffff883feb7ab500
    RBP: ffff883ffef03928   R8: 0000000000002ce2   R9: 00000000000027da
    R10: 000001ea00000000  R11: 0000000000002d82  R12: ffff883f90a1ee80
    R13: ffff883fb8791120  R14: ffff883feb7abc00  R15: 0000000000002ce2
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
 #9 [ffff883ffef03930] tcp_gso_segment at ffffffff818713e7

Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoMerge branch '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next...
David S. Miller [Sun, 25 Mar 2018 20:24:34 +0000 (16:24 -0400)]
Merge branch '10GbE' of git://git./linux/kernel/git/jkirsher/next-queue

Jeff Kirsher says:

====================
10GbE Intel Wired LAN Driver Updates 2018-03-23

This series contains updates to ixgbe and ixgbevf only.

Paul adds status register reads to reduce a potential race condition
where registers can read 0xFFFFFFFF during a PCI reset, which in turn
causes the driver to remove the adapter.  Then fixes an assignment
operation with an "OR" operation.

Shannon Nelson provides several IPsec offload cleanups to ixgbe, as well as a
patch to enable TSO with IPsec offload.

Tony provides the much anticipated XDP support for ixgbevf.  Currently,
pass, drop and XDP_TX actions are supported, as well as meta data and
stats reporting.

Björn Töpel tweaks the page counting for XDP_REDIRECT, since a page can
have its reference count decreased via the xdp_do_redirect() call.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoMerge branch 'liquidio-Tx-queue-cleanup'
David S. Miller [Sun, 25 Mar 2018 20:18:55 +0000 (16:18 -0400)]
Merge branch 'liquidio-Tx-queue-cleanup'

Intiyaz Basha says:

====================
liquidio: Tx queue cleanup

Moved some common function to octeon_network.h
Removed some unwanted functions and checks.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoliquidio: Renamed txqs_start to start_txqs
Intiyaz Basha [Sat, 24 Mar 2018 00:37:44 +0000 (17:37 -0700)]
liquidio: Renamed txqs_start to start_txqs

For consistency renaming txqs_start to start_txqs

Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Acked-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoliquidio: Renamed txqs_stop to stop_txqs
Intiyaz Basha [Sat, 24 Mar 2018 00:37:41 +0000 (17:37 -0700)]
liquidio: Renamed txqs_stop to stop_txqs

For consistency renaming txqs_stop to stop_txqs

Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Acked-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoliquidio: Renamed txqs_wake to wake_txqs
Intiyaz Basha [Sat, 24 Mar 2018 00:37:39 +0000 (17:37 -0700)]
liquidio: Renamed txqs_wake to wake_txqs

For consistency renaming txqs_wake to wake_txqs

Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Acked-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoliquidio: Function call skb_iq for deriving queue from skb
Intiyaz Basha [Sat, 24 Mar 2018 00:37:36 +0000 (17:37 -0700)]
liquidio: Function call skb_iq for deriving queue from skb

Using skb_iq function for deriving queue from skb

Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Acked-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoliquidio: Removed one line function wake_q
Intiyaz Basha [Sat, 24 Mar 2018 00:37:33 +0000 (17:37 -0700)]
liquidio: Removed one line function wake_q

Removing one line function wake_q

Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Acked-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoliquidio: Removed one line function stop_q
Intiyaz Basha [Sat, 24 Mar 2018 00:37:30 +0000 (17:37 -0700)]
liquidio: Removed one line function stop_q

Removing one line function stop_q

Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Acked-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoliquidio: Removed netif_is_multiqueue check
Intiyaz Basha [Sat, 24 Mar 2018 00:37:28 +0000 (17:37 -0700)]
liquidio: Removed netif_is_multiqueue check

Removing checks for netif_is_multiqueue.
Configuring single queue will be a multiqueue netdev with one queues.

Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Acked-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoliquidio: Removed start_txq function
Intiyaz Basha [Sat, 24 Mar 2018 00:37:25 +0000 (17:37 -0700)]
liquidio: Removed start_txq function

Removing start_txq function from VF and PF files

Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Acked-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoliquidio: Removed one line function stop_txq
Intiyaz Basha [Sat, 24 Mar 2018 00:37:20 +0000 (17:37 -0700)]
liquidio: Removed one line function stop_txq

Removing one line function stop_txq

Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Acked-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoliquidio: Moved common function skb_iq to to octeon_network.h
Intiyaz Basha [Sat, 24 Mar 2018 00:37:17 +0000 (17:37 -0700)]
liquidio: Moved common function skb_iq to to octeon_network.h

Moving common function skb_iq to to octeon_network.h

Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Acked-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoliquidio: Moved common function txqs_start to octeon_network.h
Intiyaz Basha [Sat, 24 Mar 2018 00:37:07 +0000 (17:37 -0700)]
liquidio: Moved common function txqs_start to octeon_network.h

Moving common function txqs_start to octeon_network.h

Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Acked-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoliquidio: Moved common function txqs_wake to octeon_network.h
Intiyaz Basha [Sat, 24 Mar 2018 00:36:58 +0000 (17:36 -0700)]
liquidio: Moved common function txqs_wake to octeon_network.h

Moving common function txqs_wake to octeon_network.h

Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Acked-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoliquidio: Moved common function txqs_stop to octeon_network.h
Intiyaz Basha [Sat, 24 Mar 2018 00:36:56 +0000 (17:36 -0700)]
liquidio: Moved common function txqs_stop to octeon_network.h

Moving common function txqs_stop to octeon_network.h

Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Acked-by: Derek Chickles <derek.chickles@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet/sched: act_vlan: declare push_vid with host byte order
Davide Caratti [Fri, 23 Mar 2018 18:31:30 +0000 (19:31 +0100)]
net/sched: act_vlan: declare push_vid with host byte order

use u16 in place of __be16 to suppress the following sparse warnings:

 net/sched/act_vlan.c:150:26: warning: incorrect type in assignment (different base types)
 net/sched/act_vlan.c:150:26: expected restricted __be16 [usertype] push_vid
 net/sched/act_vlan.c:150:26: got unsigned short
 net/sched/act_vlan.c:151:21: warning: restricted __be16 degrades to integer
 net/sched/act_vlan.c:208:26: warning: incorrect type in assignment (different base types)
 net/sched/act_vlan.c:208:26: expected unsigned short [unsigned] [usertype] tcfv_push_vid
 net/sched/act_vlan.c:208:26: got restricted __be16 [usertype] push_vid

Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet/sched: remove tcf_idr_cleanup()
Davide Caratti [Fri, 23 Mar 2018 18:09:39 +0000 (19:09 +0100)]
net/sched: remove tcf_idr_cleanup()

tcf_idr_cleanup() is no more used, so remove it.

Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agomlxsw: spectrum_span: Prevent duplicate mirrors
Ido Schimmel [Fri, 23 Mar 2018 18:03:58 +0000 (21:03 +0300)]
mlxsw: spectrum_span: Prevent duplicate mirrors

In net commit 8175f7c4736f ("mlxsw: spectrum: Prevent duplicate
mirrors") we prevented the user from mirroring more than once from a
single binding point (port-direction pair).

The fix was essentially reverted in a merge conflict resolution when net
was merged into net-next. Restore it.

Fixes: 03fe2debbb27 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoixgbe: tweak page counting for XDP_REDIRECT
Björn Töpel [Thu, 22 Mar 2018 09:02:36 +0000 (10:02 +0100)]
ixgbe: tweak page counting for XDP_REDIRECT

The current page counting scheme assumes that the reference count
cannot decrease until the received frame is sent to the upper layers
of the networking stack. This assumption does not hold for the
XDP_REDIRECT action, since a page (pointed out by xdp_buff) can have
its reference count decreased via the xdp_do_redirect call.

To work around that, we now start off by a large page count and then
don't allow a refcount less than two.

Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
3 years agoixgbevf: Add XDP queue stats reporting
Tony Nguyen [Fri, 16 Mar 2018 22:34:06 +0000 (15:34 -0700)]
ixgbevf: Add XDP queue stats reporting

XDP stats are included in TX stats, however, they are not
reported in TX queue stats since they are setup on different
queues.  Add reporting for XDP queue stats to provide
consistency between the total stats and per queue stats.

Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
3 years agoixgbevf: Add support for meta data
Tony Nguyen [Fri, 16 Mar 2018 22:34:05 +0000 (15:34 -0700)]
ixgbevf: Add support for meta data

Add support for XDP meta data when using build skb.

Based on commit 366a88fe2f40 ("bpf, ixgbe: add meta data support")

Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
3 years agoixgbevf: Delay tail write for XDP packets
Tony Nguyen [Fri, 16 Mar 2018 22:34:04 +0000 (15:34 -0700)]
ixgbevf: Delay tail write for XDP packets

Current XDP implementation hits the tail on every XDP_TX; change the
driver to only hit the tail after packet processing is complete.

Based on
commit 7379f97a4fce ("ixgbe: delay tail write to every 'n' packets")

Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
3 years agoixgbevf: Add support for XDP_TX action
Tony Nguyen [Fri, 16 Mar 2018 22:34:03 +0000 (15:34 -0700)]
ixgbevf: Add support for XDP_TX action

This implements the XDP_TX action which is modeled on the ixgbe
implementation. However instead of using CPU id to determine which XDP
queue to use, this uses the received RX queue index, which is similar
to i40e. Doing this eliminates the restriction that number of CPUs not
exceed number of XDP queues that ixgbe has.

Also, based on the number of queues available, the number of TX queues
may be reduced when an XDP program is loaded in order to accommodate the
XDP queues.

Based largely on
commit 33fdc82f0883 ("ixgbe: add support for XDP_TX action")

Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
3 years agoixgbevf: Add XDP support for pass and drop actions
Tony Nguyen [Fri, 16 Mar 2018 22:34:02 +0000 (15:34 -0700)]
ixgbevf: Add XDP support for pass and drop actions

Implement XDP_PASS and XDP_DROP based on the ixgbe implementation.

Based largely on commit 924708081629 ("ixgbe: add XDP support for pass and
drop actions").

Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
3 years agoixgbe: enable TSO with IPsec offload
Shannon Nelson [Fri, 16 Mar 2018 18:09:07 +0000 (11:09 -0700)]
ixgbe: enable TSO with IPsec offload

Fix things up to support TSO offload in conjunction
with IPsec hw offload.  This raises throughput with
IPsec offload on to nearly line rate.

Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
3 years agoixgbe: no need for esp trailer if GSO
Shannon Nelson [Fri, 16 Mar 2018 18:09:06 +0000 (11:09 -0700)]
ixgbe: no need for esp trailer if GSO

There is no need to calculate the trailer length if we're doing
a GSO/TSO, as there is no trailer added to the packet data.
Also, don't bother clearing the flags field as it was already
cleared earlier.

Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
3 years agoixgbe: remove unneeded ipsec test in TX path
Shannon Nelson [Fri, 16 Mar 2018 18:09:05 +0000 (11:09 -0700)]
ixgbe: remove unneeded ipsec test in TX path

Since the ipsec data fields will be zero anyway in the non-ipsec
case, we can remove the conditional jump.

Suggested-by: Alexander Duyck <alexander.duyck@gmail.com>
Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
3 years agoixgbe: no need for ipsec csum feature check
Shannon Nelson [Fri, 16 Mar 2018 18:09:04 +0000 (11:09 -0700)]
ixgbe: no need for ipsec csum feature check

With the patch
commit f8aa2696b4af ("esp: check the NETIF_F_HW_ESP_TX_CSUM bit before segmenting")
we no longer need to protect ourself from checksum
offload requests on IPsec packets, so we can remove
the check in our .ndo_features_check callback.

Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
3 years agoixgbe: fix read-modify-write in x550 phy setup
Paul Greenwalt [Thu, 15 Mar 2018 12:22:07 +0000 (08:22 -0400)]
ixgbe: fix read-modify-write in x550 phy setup

Replaced an assignment operation with an OR operation.

The variable assignment was overwriting the value read from the PHY
register. The OR operation sets only the intended register bits.

The bits that were being overwritten are reserved, so the assignment had no
functional impact.

Reported by: Shannon Nelson <shannon.nelson@oracle.com>
Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
3 years agoixgbe: add status reg reads to ixgbe_check_remove
Paul Greenwalt [Mon, 12 Mar 2018 13:22:55 +0000 (09:22 -0400)]
ixgbe: add status reg reads to ixgbe_check_remove

Add status register reads and delay between reads to ixgbe_check_remove.
Registers can read 0xFFFFFFFF during PCI reset, which causes the driver
to remove the adapter. The additional status register reads can reduce the
chance of this race condition.

If the status register is not 0xFFFFFFFF, then ixgbe_check_remove returns
the value of the register being read.

Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
3 years agonet: phy: intel-xway: add VR9 v1.1 phy ids
Mathias Kresin [Thu, 22 Mar 2018 22:31:39 +0000 (23:31 +0100)]
net: phy: intel-xway: add VR9 v1.1 phy ids

The phys embedded into the v1.1 of the VR9 SoC are using different phy
ids. Add the phy ids to use the driver for this VR9 version as well.

Signed-off-by: Mathias Kresin <dev@kresin.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: phy: intel-xway: add VR9 version number
Mathias Kresin [Thu, 22 Mar 2018 22:31:38 +0000 (23:31 +0100)]
net: phy: intel-xway: add VR9 version number

The VR9 phy ids are matching only for the SoC version 1.2. Rename the
macros and change the names to take this into account.

Signed-off-by: Mathias Kresin <dev@kresin.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: hns3: hclge_inform_reset_assert_to_vf() can be static
kbuild test robot [Thu, 22 Mar 2018 21:31:07 +0000 (05:31 +0800)]
net: hns3: hclge_inform_reset_assert_to_vf() can be static

Fixes: 2bfbd35d8ecd ("net: hns3: Changes required in PF mailbox to support VF reset")
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoqed: Use true and false for boolean values
Gustavo A. R. Silva [Thu, 22 Mar 2018 20:08:49 +0000 (15:08 -0500)]
qed: Use true and false for boolean values

Assign true or false to boolean variables instead of an integer value.

This issue was detected with the help of Coccinelle.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Sudarsana Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agodpaa_eth: use true and false for boolean values
Gustavo A. R. Silva [Thu, 22 Mar 2018 19:59:27 +0000 (14:59 -0500)]
dpaa_eth: use true and false for boolean values

Assign true or false to boolean variables instead of an integer value.

This issue was detected with the help of Coccinelle.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoMerge branch 'tipc-introduce-128-bit-auto-configurable-node-id'
David S. Miller [Fri, 23 Mar 2018 17:12:19 +0000 (13:12 -0400)]
Merge branch 'tipc-introduce-128-bit-auto-configurable-node-id'

Jon Maloy says:

====================
tipc: introduce 128-bit auto-configurable node id

We introduce a 128-bit free-format node identity as an alternative to
the legacy <Zone.Cluster.Node> structured 32-bit node address.

We also make configuration of this identity optional; if a bearer is
enabled without a pre-configured node id it will be set automatically
based on the used interface's MAC or IP address.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agotipc: obtain node identity from interface by default
Jon Maloy [Thu, 22 Mar 2018 19:42:52 +0000 (20:42 +0100)]
tipc: obtain node identity from interface by default

Selecting and explicitly configuring a TIPC node identity may be
unwanted in some cases.

In this commit we introduce a default setting if the identity has not
been set at the moment the first bearer is enabled. We do this by
using a raw copy of a unique identifier from the used interface: MAC
address in the case of an L2 bearer, IPv4/IPv6 address in the case
of a UDP bearer.

Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agotipc: handle collisions of 32-bit node address hash values
Jon Maloy [Thu, 22 Mar 2018 19:42:51 +0000 (20:42 +0100)]
tipc: handle collisions of 32-bit node address hash values

When a 32-bit node address is generated from a 128-bit identifier,
there is a risk of collisions which must be discovered and handled.

We do this as follows:
- We don't apply the generated address immediately to the node, but do
  instead initiate a 1 sec trial period to allow other cluster members
  to discover and handle such collisions.

- During the trial period the node periodically sends out a new type
  of message, DSC_TRIAL_MSG, using broadcast or emulated broadcast,
  to all the other nodes in the cluster.

- When a node is receiving such a message, it must check that the
  presented 32-bit identifier either is unused, or was used by the very
  same peer in a previous session. In both cases it accepts the request
  by not responding to it.

- If it finds that the same node has been up before using a different
  address, it responds with a DSC_TRIAL_FAIL_MSG containing that
  address.

- If it finds that the address has already been taken by some other
  node, it generates a new, unused address and returns it to the
  requester.

- During the trial period the requesting node must always be prepared
  to accept a failure message, i.e., a message where a peer suggests a
  different (or equal)  address to the one tried. In those cases it
  must apply the suggested value as trial address and restart the trial
  period.

This algorithm ensures that in the vast majority of cases a node will
have the same address before and after a reboot. If a legacy user
configures the address explicitly, there will be no trial period and
messages, so this protocol addition is completely backwards compatible.

Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agotipc: add 128-bit node identifier
Jon Maloy [Thu, 22 Mar 2018 19:42:50 +0000 (20:42 +0100)]
tipc: add 128-bit node identifier

We add a 128-bit node identity, as an alternative to the currently used
32-bit node address.

For the sake of compatibility and to minimize message header changes
we retain the existing 32-bit address field. When not set explicitly by
the user, this field will be filled with a hash value generated from the
much longer node identity, and be used as a shorthand value for the
latter.

We permit either the address or the identity to be set by configuration,
but not both, so when the address value is set by a legacy user the
corresponding 128-bit node identity is generated based on the that value.

Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agotipc: remove direct accesses to own_addr field in struct tipc_net
Jon Maloy [Thu, 22 Mar 2018 19:42:49 +0000 (20:42 +0100)]
tipc: remove direct accesses to own_addr field in struct tipc_net

As a preparation to changing the addressing structure of TIPC we replace
all direct accesses to the tipc_net::own_addr field with the function
dedicated for this, tipc_own_addr().

There are no changes to program logics in this commit.

Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agotipc: allow closest-first lookup algorithm when legacy address is configured
Jon Maloy [Thu, 22 Mar 2018 19:42:48 +0000 (20:42 +0100)]
tipc: allow closest-first lookup algorithm when legacy address is configured

The removal of an internal structure of the node address has an unwanted
side effect.
- Currently, if a user is sending an anycast message with destination
  domain 0, the tipc_namebl_translate() function will use the 'closest-
  first' algorithm to first look for a node local destination, and only
  when no such is found, will it resort to the cluster global 'round-
  robin' lookup algorithm.
- Current users can get around this, and enforce unconditional use of
  global round-robin by indicating a destination as Z.0.0 or Z.C.0.
- This option disappears when we make the node address flat, since the
  lookup algorithm has no way of recognizing this case. So, as long as
  there are node local destinations, the algorithm will always select
  one of those, and there is nothing the sender can do to change this.

We solve this by eliminating the 'closest-first' option, which was never
a good idea anyway, for non-legacy users, but only for those. To
distinguish between legacy users and non-legacy users we introduce a new
flag 'legacy_addr_format' in struct tipc_core, to be set when the user
configures a legacy-style Z.C.N node address. Hence, when a legacy user
indicates a zero lookup domain 'closest-first' is selected, and in all
other cases we use 'round-robin'.

Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agotipc: remove restrictions on node address values
Jon Maloy [Thu, 22 Mar 2018 19:42:47 +0000 (20:42 +0100)]
tipc: remove restrictions on node address values

Nominally, TIPC organizes network nodes into a three-level network
hierarchy consisting of the levels 'zone', 'cluster' and 'node'. This
hierarchy is reflected in the node address format, - it is sub-divided
into an 8-bit zone id, and 12 bit cluster id, and a 12-bit node id.

However, the 'zone' and 'cluster' levels have in reality never been
fully implemented,and never will be. The result of this has been
that the first 20 bits the node identity structure have been wasted,
and the usable node identity range within a cluster has been limited
to 12 bits. This is starting to become a problem.

In the following commits, we will need to be able to connect between
nodes which are using the whole 32-bit value space of the node address.
We therefore remove the restrictions on which values can be assigned
to node identity, -it is from now on only a 32-bit integer with no
assumed internal structure.

Isolation between clusters is now achieved only by setting different
values for the 'network id' field used during neighbor discovery, in
practice leading to the latter becoming the new cluster identity.

The rules for accepting discovery requests/responses from neighboring
nodes now become:

- If the user is using legacy address format on both peers, reception
  of discovery messages is subject to the legacy lookup domain check
  in addition to the cluster id check.

- Otherwise, the discovery request/response is always accepted, provided
  both peers have the same network id.

This secures backwards compatibility for users who have been using zone
or cluster identities as cluster separators, instead of the intended
'network id'.

Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agotipc: some cleanups in the file discover.c
Jon Maloy [Thu, 22 Mar 2018 19:42:46 +0000 (20:42 +0100)]
tipc: some cleanups in the file discover.c

To facilitate the coming changes in the neighbor discovery functionality
we make some renaming and refactoring of that code. The functional changes
in this commit are trivial, e.g., that we move the message sending call in
tipc_disc_timeout() outside the spinlock protected region.

Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agotipc: refactor function tipc_enable_bearer()
Jon Maloy [Thu, 22 Mar 2018 19:42:45 +0000 (20:42 +0100)]
tipc: refactor function tipc_enable_bearer()

As a preparation for the next commits we try to reduce the footprint of
the function tipc_enable_bearer(), while hopefully making is simpler to
follow.

Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet/mlx5: Fix use-after-free
Gustavo A. R. Silva [Thu, 22 Mar 2018 18:44:56 +0000 (13:44 -0500)]
net/mlx5: Fix use-after-free

_rule_ is being freed and then dereferenced by accessing rule->ctx

Fix this by copying the value returned by PTR_ERR(rule->ctx) into a local
variable for its safe use after freeing _rule_

Addresses-Coverity-ID: 1466041 ("Read from pointer after free")
Fixes: 05564d0ae075 ("net/mlx5: Add flow-steering commands for FPGA IPSec implementation")
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoMerge branch 'pernet-convert-part11'
David S. Miller [Fri, 23 Mar 2018 17:00:47 +0000 (13:00 -0400)]
Merge branch 'pernet-convert-part11'

Kirill Tkhai says:

====================
Converting pernet_operations (part #11)

this series continues to review and to convert pernet_operations
to make them possible to be executed in parallel for several
net namespaces at the same time.

I thought last series was last, but there is one
new pernet_operations came to kernel. This is
udp_sysctl_ops, and here we convert it.

Also, David Howells acked rxrpc_net_ops, so I resend
the patch in case of it should be queued by patchwork:

https://www.spinics.net/lists/netdev/msg490678.html
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: Convert rxrpc_net_ops
Kirill Tkhai [Thu, 22 Mar 2018 18:34:55 +0000 (21:34 +0300)]
net: Convert rxrpc_net_ops

These pernet_operations modifies rxrpc_net_id-pointed
per-net entities. There is external link to AF_RXRPC
in fs/afs/Kconfig, but it seems there is no other
pernet_operations interested in that per-net entities.

Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: Convert udp_sysctl_ops
Kirill Tkhai [Thu, 22 Mar 2018 18:34:46 +0000 (21:34 +0300)]
net: Convert udp_sysctl_ops

These pernet_operations just initialize udp4 defaults.

Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agomlxsw: spectrum_span: Fix initialization of struct mlxsw_sp_span_parms
Petr Machata [Thu, 22 Mar 2018 18:14:47 +0000 (20:14 +0200)]
mlxsw: spectrum_span: Fix initialization of struct mlxsw_sp_span_parms

Since the first element of struct mlxsw_sp_span_parms is a pointer,
to zero-initialize this structure the correct notation is not = {0}, but
rather = {NULL}, as reported by sparse.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agotc-testing: add selftests for 'bpf' action
Davide Caratti [Thu, 22 Mar 2018 18:12:19 +0000 (19:12 +0100)]
tc-testing: add selftests for 'bpf' action

Test d959: Add cBPF action with valid bytecode
Test f84a: Add cBPF action with invalid bytecode
Test e939: Add eBPF action with valid object-file
Test 282d: Add eBPF action with invalid object-file
Test d819: Replace cBPF bytecode and action control
Test 6ae3: Delete cBPF action
Test 3e0d: List cBPF actions
Test 55ce: Flush BPF actions
Test ccc3: Add cBPF action with duplicate index
Test 89c7: Add cBPF action with invalid index
Test 7ab9: Add cBPF action with cookie

Changes since v1:
 - use index=2^32-1 in test ccc3, add tests 7a89, 89c7 (thanks Roman Mashak)
 - added test 282d

Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonet: bridge: fix direct access to bridge vlan_enabled and use helper
Nikolay Aleksandrov [Fri, 23 Mar 2018 16:27:06 +0000 (18:27 +0200)]
net: bridge: fix direct access to bridge vlan_enabled and use helper

We need to use br_vlan_enabled() helper otherwise we'll break builds
without bridge vlans:
net/bridge//br_if.c: In function ‘br_mtu’:
net/bridge//br_if.c:458:8: error: ‘const struct net_bridge’ has no
member named ‘vlan_enabled’
  if (br->vlan_enabled)
        ^
net/bridge//br_if.c:462:1: warning: control reaches end of non-void
function [-Wreturn-type]
 }
 ^
scripts/Makefile.build:324: recipe for target 'net/bridge//br_if.o'
failed

Fixes: 419d14af9e07 ("bridge: Allow max MTU when multiple VLANs present")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoMerge branch 'tls-RX'
David S. Miller [Fri, 23 Mar 2018 16:25:55 +0000 (12:25 -0400)]
Merge branch 'tls-RX'

Dave Watson says:

====================
TLS Rx

TLS tcp socket RX implementation, to match existing TX code.

This patchset completes the software TLS socket, allowing full
bi-directional communication over TLS using normal socket syscalls,
after the handshake has been done in userspace.  Only the symmetric
encryption is done in the kernel.

This allows usage of TLS sockets from within the kernel (for example
with network block device, or from bpf).  Performance can be better
than userspace, with appropriate crypto routines [1].

sk->sk_socket->ops must be overridden to implement splice_read and
poll, but otherwise the interface & implementation match TX closely.
strparser is used to parse TLS framing on receive.

There are Openssl RX patches that work with this interface [2], as
well as a testing tool using the socket interface directly (without
cmsg support) [3].  An example tcp socket setup is:

  // Normal tcp socket connect/accept, and TLS handshake
  // using any TLS library.
  setsockopt(sock, SOL_TCP, TCP_ULP, "tls", sizeof("tls"));

  struct tls12_crypto_info_aes_gcm_128 crypto_info_rx;
  // Fill in crypto_info based on negotiated keys.

  setsockopt(sock, SOL_TLS, TLS_RX, &crypto_info, sizeof(crypto_info_rx));
  // You can optionally TLX_TX as well.

  char buffer[16384];
  int ret = recv(sock, buffer, 16384);

  // cmsg can be received using recvmsg and a msg_control
  // of type TLS_GET_RECORD_TYPE will be set.

V1 -> V2

* For too-small framing errors, return EBADMSG, to match openssl error
  code semantics.  Docs and commit logs about this also updated.

RFC -> V1

* Refactor 'tx' variable names to drop tx
* Error return codes changed per discussion
* Only call skb_cow_data based on in-place decryption,
  drop unnecessary frag list check.

[1] Recent crypto patchset to remove copies, resulting in optimally
    zero copies vs. userspace's one, vs. previous kernel's two.

https://marc.info/?l=linux-crypto-vger&m=151931242406416&w=2

[2] https://github.com/Mellanox/openssl/commits/tls_rx2

[3] https://github.com/ktls/af_ktls-tool/tree/RX
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agotls: Add receive path documentation
Dave Watson [Thu, 22 Mar 2018 17:10:44 +0000 (10:10 -0700)]
tls: Add receive path documentation

Add documentation on rx path setup and cmsg interface.

Signed-off-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agotls: RX path for ktls
Dave Watson [Thu, 22 Mar 2018 17:10:35 +0000 (10:10 -0700)]
tls: RX path for ktls

Add rx path for tls software implementation.

recvmsg, splice_read, and poll implemented.

An additional sockopt TLS_RX is added, with the same interface as
TLS_TX.  Either TLX_RX or TLX_TX may be provided separately, or
together (with two different setsockopt calls with appropriate keys).

Control messages are passed via CMSG in a similar way to transmit.
If no cmsg buffer is passed, then only application data records
will be passed to userspace, and EIO is returned for other types of
alerts.

EBADMSG is passed for decryption errors, and EMSGSIZE is passed for
framing too big, and EBADMSG for framing too small (matching openssl
semantics). EINVAL is returned for TLS versions that do not match the
original setsockopt call.  All are unrecoverable.

strparser is used to parse TLS framing.   Decryption is done directly
in to userspace buffers if they are large enough to support it, otherwise
sk_cow_data is called (similar to ipsec), and buffers are decrypted in
place and copied.  splice_read always decrypts in place, since no
buffers are provided to decrypt in to.

sk_poll is overridden, and only returns POLLIN if a full TLS message is
received.  Otherwise we wait for strparser to finish reading a full frame.
Actual decryption is only done during recvmsg or splice_read calls.

Signed-off-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agotls: Refactor variable names
Dave Watson [Thu, 22 Mar 2018 17:10:26 +0000 (10:10 -0700)]
tls: Refactor variable names

Several config variables are prefixed with tx, drop the prefix
since these will be used for both tx and rx.

Signed-off-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agotls: Pass error code explicitly to tls_err_abort
Dave Watson [Thu, 22 Mar 2018 17:10:15 +0000 (10:10 -0700)]
tls: Pass error code explicitly to tls_err_abort

Pass EBADMSG explicitly to tls_err_abort.  Receive path will
pass additional codes - EMSGSIZE if framing is larger than max
TLS record size, EINVAL if TLS version mismatch.

Signed-off-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agotls: Move cipher info to a separate struct
Dave Watson [Thu, 22 Mar 2018 17:10:06 +0000 (10:10 -0700)]
tls: Move cipher info to a separate struct

Separate tx crypto parameters to a separate cipher_context struct.
The same parameters will be used for rx using the same struct.

tls_advance_record_sn is modified to only take the cipher info.

Signed-off-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agotls: Generalize zerocopy_from_iter
Dave Watson [Thu, 22 Mar 2018 17:09:53 +0000 (10:09 -0700)]
tls: Generalize zerocopy_from_iter

Refactor zerocopy_from_iter to take arguments for pages and size,
such that it can be used for both tx and rx. RX will also support
zerocopy direct to output iter, as long as the full message can
be copied at once (a large enough userspace buffer was provided).

Signed-off-by: Dave Watson <davejwatson@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agointel: add SPDX identifiers to all the Intel drivers
Jeff Kirsher [Thu, 22 Mar 2018 17:08:48 +0000 (10:08 -0700)]
intel: add SPDX identifiers to all the Intel drivers

Add the SPDX identifiers to all the Intel wired LAN driver files, as
outlined in Documentation/process/license-rules.rst.

Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agobridge: Allow max MTU when multiple VLANs present
Chas Williams [Thu, 22 Mar 2018 15:34:06 +0000 (11:34 -0400)]
bridge: Allow max MTU when multiple VLANs present

If the bridge is allowing multiple VLANs, some VLANs may have
different MTUs.  Instead of choosing the minimum MTU for the
bridge interface, choose the maximum MTU of the bridge members.
With this the user only needs to set a larger MTU on the member
ports that are participating in the large MTU VLANS.

Signed-off-by: Chas Williams <3chas3@gmail.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agovirtio-net: Fix operstate for virtio when no VIRTIO_NET_F_STATUS
Jay Vosburgh [Thu, 22 Mar 2018 14:42:41 +0000 (14:42 +0000)]
virtio-net: Fix operstate for virtio when no VIRTIO_NET_F_STATUS

The operstate update logic will leave an interface in the
default UNKNOWN operstate if the interface carrier state never changes
from the default carrier up state set at creation.  This includes the
case of an explicit call to netif_carrier_on, as the carrier on to on
transition has no effect on operstate.

This affects virtio-net for the case that the virtio peer does
not support VIRTIO_NET_F_STATUS (the feature that provides carrier state
updates).  Without this feature, the virtio specification states that
"the link should be assumed active," so, logically, the operstate should
be UP instead of UNKNOWN.  This has impact on user space applications
that use the operstate to make availability decisions for the interface.

Resolve this by changing the virtio probe logic slightly to call
netif_carrier_off for both the "with" and "without" VIRTIO_NET_F_STATUS
cases, and then the existing call to netif_carrier_on for the "without"
case will cause an operstate transition.

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agodevlink: Remove top_hierarchy arg for DEVLINK disabled path
David Ahern [Fri, 23 Mar 2018 15:09:48 +0000 (08:09 -0700)]
devlink: Remove top_hierarchy arg for DEVLINK disabled path

Earlier change missed the path where CONFIG_NET_DEVLINK is disabled.
Thanks to Jiri for spotting.

Fixes: 145307460ba9 ("devlink: Remove top_hierarchy arg to devlink_resource_register")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
David S. Miller [Fri, 23 Mar 2018 15:24:57 +0000 (11:24 -0400)]
Merge git://git./linux/kernel/git/davem/net

Fun set of conflict resolutions here...

For the mac80211 stuff, these were fortunately just parallel
adds.  Trivially resolved.

In drivers/net/phy/phy.c we had a bug fix in 'net' that moved the
function phy_disable_interrupts() earlier in the file, whilst in
'net-next' the phy_error() call from this function was removed.

In net/ipv4/xfrm4_policy.c, David Ahern's changes to remove the
'rt_table_id' member of rtable collided with a bug fix in 'net' that
added a new struct member "rt_mtu_locked" which needs to be copied
over here.

The mlxsw driver conflict consisted of net-next separating
the span code and definitions into separate files, whilst
a 'net' bug fix made some changes to that moved code.

The mlx5 infiniband conflict resolution was quite non-trivial,
the RDMA tree's merge commit was used as a guide here, and
here are their notes:

====================

    Due to bug fixes found by the syzkaller bot and taken into the for-rc
    branch after development for the 4.17 merge window had already started
    being taken into the for-next branch, there were fairly non-trivial
    merge issues that would need to be resolved between the for-rc branch
    and the for-next branch.  This merge resolves those conflicts and
    provides a unified base upon which ongoing development for 4.17 can
    be based.

    Conflicts:
            drivers/infiniband/hw/mlx5/main.c - Commit 42cea83f9524
            (IB/mlx5: Fix cleanup order on unload) added to for-rc and
            commit b5ca15ad7e61 (IB/mlx5: Add proper representors support)
            add as part of the devel cycle both needed to modify the
            init/de-init functions used by mlx5.  To support the new
            representors, the new functions added by the cleanup patch
            needed to be made non-static, and the init/de-init list
            added by the representors patch needed to be modified to
            match the init/de-init list changes made by the cleanup
            patch.
    Updates:
            drivers/infiniband/hw/mlx5/mlx5_ib.h - Update function
            prototypes added by representors patch to reflect new function
            names as changed by cleanup patch
            drivers/infiniband/hw/mlx5/ib_rep.c - Update init/de-init
            stage list to match new order from cleanup patch
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoMerge branch 'akpm' (patches from Andrew)
Linus Torvalds [Fri, 23 Mar 2018 01:48:43 +0000 (18:48 -0700)]
Merge branch 'akpm' (patches from Andrew)

Merge misc fixes from Andrew Morton:
 "13 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm, thp: do not cause memcg oom for thp
  mm/vmscan: wake up flushers for legacy cgroups too
  Revert "mm: page_alloc: skip over regions of invalid pfns where possible"
  mm/shmem: do not wait for lock_page() in shmem_unused_huge_shrink()
  mm/thp: do not wait for lock_page() in deferred_split_scan()
  mm/khugepaged.c: convert VM_BUG_ON() to collapse fail
  x86/mm: implement free pmd/pte page interfaces
  mm/vmalloc: add interfaces to free unmapped page table
  h8300: remove extraneous __BIG_ENDIAN definition
  hugetlbfs: check for pgoff value overflow
  lockdep: fix fs_reclaim warning
  MAINTAINERS: update Mark Fasheh's e-mail
  mm/mempolicy.c: avoid use uninitialized preferred_node

3 years agoMerge branch 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdim...
Linus Torvalds [Fri, 23 Mar 2018 01:37:49 +0000 (18:37 -0700)]
Merge branch 'libnvdimm-fixes' of git://git./linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm fixes from Dan Williams:
 "Two regression fixes, two bug fixes for older issues, two fixes for
  new functionality added this cycle that have userspace ABI concerns,
  and a small cleanup. These have appeared in a linux-next release and
  have a build success report from the 0day robot.

   * The 4.16 rework of altmap handling led to some configurations
     leaking page table allocations due to freeing from the altmap
     reservation rather than the page allocator.

     The impact without the fix is leaked memory and a WARN() message
     when tearing down libnvdimm namespaces. The rework also missed a
     place where error handling code needed to be removed that can lead
     to a crash if devm_memremap_pages() fails.

   * acpi_map_pxm_to_node() had a latent bug whereby it could
     misidentify the closest online node to a given proximity domain.

   * Block integrity handling was reworked several kernels back to allow
     calling add_disk() after setting up the integrity profile.

     The nd_btt and nd_blk drivers are just now catching up to fix
     automatic partition detection at driver load time.

   * The new peristence_domain attribute, a platform indicator of
     whether cpu caches are powerfail protected for example, is meant to
     be a single value enum and not a set of flags.

     This oversight was caught while reviewing new userspace code in
     libndctl to communicate the attribute.

     Fix this new enabling up so that we are not stuck with an unwanted
     userspace ABI"

* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  libnvdimm, nfit: fix persistence domain reporting
  libnvdimm, region: hide persistence_domain when unknown
  acpi, numa: fix pxm to online numa node associations
  x86, memremap: fix altmap accounting at free
  libnvdimm: remove redundant assignment to pointer 'dev'
  libnvdimm, {btt, blk}: do integrity setup before add_disk()
  kernel/memremap: Remove stale devres_free() call

3 years agoMerge tag 'drm-fixes-for-v4.16-rc7' of git://people.freedesktop.org/~airlied/linux
Linus Torvalds [Fri, 23 Mar 2018 00:37:44 +0000 (17:37 -0700)]
Merge tag 'drm-fixes-for-v4.16-rc7' of git://people.freedesktop.org/~airlied/linux

Pull drm fixes from Dave Airlie:
 "A bunch of fixes all over the place (core, i915, amdgpu, imx, sun4i,
  ast, tegra, vmwgfx), nothing too serious or worrying at this stage.

   - one uapi fix to stop multi-planar images with getfb

   - Sun4i error path and clock fixes

   - udl driver mmap offset fix

   - i915 DP MST and GPU reset fixes

   - vmwgfx mutex and black screen fixes

   - imx array underflow fix and vblank fix

   - amdgpu: display fixes

   - exynos devicetree fix

   - ast mode fix"

* tag 'drm-fixes-for-v4.16-rc7' of git://people.freedesktop.org/~airlied/linux: (29 commits)
  drm/ast: Fixed 1280x800 Display Issue
  drm: udl: Properly check framebuffer mmap offsets
  drm/i915: Specify which engines to reset following semaphore/event lockups
  drm/vmwgfx: Fix a destoy-while-held mutex problem.
  drm/vmwgfx: Fix black screen and device errors when running without fbdev
  drm: Reject getfb for multi-plane framebuffers
  drm/amd/display: Add one to EDID's audio channel count when passing to DC
  drm/amd/display: We shouldn't set format_default on plane as atomic driver
  drm/amd/display: Fix FMT truncation programming
  drm/amd/display: Allow truncation to 10 bits
  drm/sun4i: hdmi: Fix another error handling path in 'sun4i_hdmi_bind()'
  drm/sun4i: hdmi: Fix an error handling path in 'sun4i_hdmi_bind()'
  drm/i915/dp: Write to SET_POWER dpcd to enable MST hub.
  drm/amd/display: fix dereferencing possible ERR_PTR()
  drm/amd/display: Refine disable VGA
  drm/tegra: Shutdown on driver unbind
  drm/tegra: dsi: Don't disable regulator on ->exit()
  drm/tegra: dc: Detach IOMMU group from domain only once
  dt-bindings: exynos: Document #sound-dai-cells property of the HDMI node
  drm/imx: move arming of the vblank event to atomic_flush
  ...

3 years agomm, thp: do not cause memcg oom for thp
David Rientjes [Thu, 22 Mar 2018 23:17:45 +0000 (16:17 -0700)]
mm, thp: do not cause memcg oom for thp

Commit 2516035499b9 ("mm, thp: remove __GFP_NORETRY from khugepaged and
madvised allocations") changed the page allocator to no longer detect
thp allocations based on __GFP_NORETRY.

It did not, however, modify the mem cgroup try_charge() path to avoid
oom kill for either khugepaged collapsing or thp faulting.  It is never
expected to oom kill a process to allocate a hugepage for thp; reclaim
is governed by the thp defrag mode and MADV_HUGEPAGE, but allocations
(and charging) should fallback instead of oom killing processes.

Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1803191409420.124411@chino.kir.corp.google.com
Fixes: 2516035499b9 ("mm, thp: remove __GFP_NORETRY from khugepaged and madvised allocations")
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
3 years agomm/vmscan: wake up flushers for legacy cgroups too
Andrey Ryabinin [Thu, 22 Mar 2018 23:17:42 +0000 (16:17 -0700)]
mm/vmscan: wake up flushers for legacy cgroups too

Commit 726d061fbd36 ("mm: vmscan: kick flushers when we encounter dirty
pages on the LRU") added flusher invocation to shrink_inactive_list()
when many dirty pages on the LRU are encountered.

However, shrink_inactive_list() doesn't wake up flushers for legacy
cgroup reclaim, so the next commit bbef938429f5 ("mm: vmscan: remove old
flusher wakeup from direct reclaim path") removed the only source of
flusher's wake up in legacy mem cgroup reclaim path.

This leads to premature OOM if there is too many dirty pages in cgroup:
    # mkdir /sys/fs/cgroup/memory/test
    # echo $$ > /sys/fs/cgroup/memory/test/tasks
    # echo 50M > /sys/fs/cgroup/memory/test/memory.limit_in_bytes
    # dd if=/dev/zero of=tmp_file bs=1M count=100
    Killed

    dd invoked oom-killer: gfp_mask=0x14000c0(GFP_KERNEL), nodemask=(null), order=0, oom_score_adj=0

    Call Trace:
     dump_stack+0x46/0x65
     dump_header+0x6b/0x2ac
     oom_kill_process+0x21c/0x4a0
     out_of_memory+0x2a5/0x4b0
     mem_cgroup_out_of_memory+0x3b/0x60
     mem_cgroup_oom_synchronize+0x2ed/0x330
     pagefault_out_of_memory+0x24/0x54
     __do_page_fault+0x521/0x540
     page_fault+0x45/0x50

    Task in /test killed as a result of limit of /test
    memory: usage 51200kB, limit 51200kB, failcnt 73
    memory+swap: usage 51200kB, limit 9007199254740988kB, failcnt 0
    kmem: usage 296kB, limit 9007199254740988kB, failcnt 0
    Memory cgroup stats for /test: cache:49632KB rss:1056KB rss_huge:0KB shmem:0KB
            mapped_file:0KB dirty:49500KB writeback:0KB swap:0KB inactive_anon:0KB
    active_anon:1168KB inactive_file:24760KB active_file:24960KB unevictable:0KB
    Memory cgroup out of memory: Kill process 3861 (bash) score 88 or sacrifice child
    Killed process 3876 (dd) total-vm:8484kB, anon-rss:1052kB, file-rss:1720kB, shmem-rss:0kB
    oom_reaper: reaped process 3876 (dd), now anon-rss:0kB, file-rss:0kB, shmem-rss:0kB

Wake up flushers in legacy cgroup reclaim too.

Link: http://lkml.kernel.org/r/20180315164553.17856-1-aryabinin@virtuozzo.com
Fixes: bbef938429f5 ("mm: vmscan: remove old flusher wakeup from direct reclaim path")
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Tested-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
3 years agoRevert "mm: page_alloc: skip over regions of invalid pfns where possible"
Daniel Vacek [Thu, 22 Mar 2018 23:17:38 +0000 (16:17 -0700)]
Revert "mm: page_alloc: skip over regions of invalid pfns where possible"

This reverts commit b92df1de5d28 ("mm: page_alloc: skip over regions of
invalid pfns where possible").  The commit is meant to be a boot init
speed up skipping the loop in memmap_init_zone() for invalid pfns.

But given some specific memory mapping on x86_64 (or more generally
theoretically anywhere but on arm with CONFIG_HAVE_ARCH_PFN_VALID) the
implementation also skips valid pfns which is plain wrong and causes
'kernel BUG at mm/page_alloc.c:1389!'

  crash> log | grep -e BUG -e RIP -e Call.Trace -e move_freepages_block -e rmqueue -e freelist -A1
  kernel BUG at mm/page_alloc.c:1389!
  invalid opcode: 0000 [#1] SMP
  --
  RIP: 0010: move_freepages+0x15e/0x160
  --
  Call Trace:
    move_freepages_block+0x73/0x80
    __rmqueue+0x263/0x460
    get_page_from_freelist+0x7e1/0x9e0
    __alloc_pages_nodemask+0x176/0x420
  --

  crash> page_init_bug -v | grep RAM
  <struct resource 0xffff88067fffd2f8>          1000 -        9bfff       System RAM (620.00 KiB)
  <struct resource 0xffff88067fffd3a0>        100000 -     430bffff       System RAM (  1.05 GiB = 1071.75 MiB = 1097472.00 KiB)
  <struct resource 0xffff88067fffd410>      4b0c8000 -     4bf9cfff       System RAM ( 14.83 MiB = 15188.00 KiB)
  <struct resource 0xffff88067fffd480>      4bfac000 -     646b1fff       System RAM (391.02 MiB = 400408.00 KiB)
  <struct resource 0xffff88067fffd560>      7b788000 -     7b7fffff       System RAM (480.00 KiB)
  <struct resource 0xffff88067fffd640>     100000000 -    67fffffff       System RAM ( 22.00 GiB)

  crash> page_init_bug | head -6
  <struct resource 0xffff88067fffd560>      7b788000 -     7b7fffff       System RAM (480.00 KiB)
  <struct page 0xffffea0001ede200>   1fffff00000000  0 <struct pglist_data 0xffff88047ffd9000> 1 <struct zone 0xffff88047ffd9800> DMA32          4096    1048575
  <struct page 0xffffea0001ede200>       505736 505344 <struct page 0xffffea0001ed8000> 505855 <struct page 0xffffea0001edffc0>
  <struct page 0xffffea0001ed8000>                0  0 <struct pglist_data 0xffff88047ffd9000> 0 <struct zone 0xffff88047ffd9000> DMA               1       4095
  <struct page 0xffffea0001edffc0>   1fffff00000400  0 <struct pglist_data 0xffff88047ffd9000> 1 <struct zone 0xffff88047ffd9800> DMA32          4096    1048575
  BUG, zones differ!

  crash> kmem -p 77fff000 78000000 7b5ff000 7b600000 7b787000 7b788000
        PAGE        PHYSICAL      MAPPING       INDEX CNT FLAGS
  ffffea0001e00000  78000000                0        0  0 0
  ffffea0001ed7fc0  7b5ff000                0        0  0 0
  ffffea0001ed8000  7b600000                0        0  0 0       <<<<
  ffffea0001ede1c0  7b787000                0        0  0 0
  ffffea0001ede200  7b788000                0        0  1 1fffff00000000

Link: http://lkml.kernel.org/r/20180316143855.29838-1-neelx@redhat.com
Fixes: b92df1de5d28 ("mm: page_alloc: skip over regions of invalid pfns where possible")
Signed-off-by: Daniel Vacek <neelx@redhat.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
3 years agomm/shmem: do not wait for lock_page() in shmem_unused_huge_shrink()
Kirill A. Shutemov [Thu, 22 Mar 2018 23:17:35 +0000 (16:17 -0700)]
mm/shmem: do not wait for lock_page() in shmem_unused_huge_shrink()

shmem_unused_huge_shrink() gets called from reclaim path.  Waiting for
page lock may lead to deadlock there.

There was a bug report that may be attributed to this:

  http://lkml.kernel.org/r/alpine.LRH.2.11.1801242349220.30642@mail.ewheeler.net

Replace lock_page() with trylock_page() and skip the page if we failed
to lock it.  We will get to the page on the next scan.

We can test for the PageTransHuge() outside the page lock as we only
need protection against splitting the page under us.  Holding pin oni
the page is enough for this.

Link: http://lkml.kernel.org/r/20180316210830.43738-1-kirill.shutemov@linux.intel.com
Fixes: 779750d20b93 ("shmem: split huge pages beyond i_size under memory pressure")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Eric Wheeler <linux-mm@lists.ewheeler.net>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org> [4.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
3 years agomm/thp: do not wait for lock_page() in deferred_split_scan()
Kirill A. Shutemov [Thu, 22 Mar 2018 23:17:31 +0000 (16:17 -0700)]
mm/thp: do not wait for lock_page() in deferred_split_scan()

deferred_split_scan() gets called from reclaim path.  Waiting for page
lock may lead to deadlock there.

Replace lock_page() with trylock_page() and skip the page if we failed
to lock it.  We will get to the page on the next scan.

Link: http://lkml.kernel.org/r/20180315150747.31945-1-kirill.shutemov@linux.intel.com
Fixes: 9a982250f773 ("thp: introduce deferred_split_huge_page()")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
3 years agomm/khugepaged.c: convert VM_BUG_ON() to collapse fail
Kirill A. Shutemov [Thu, 22 Mar 2018 23:17:28 +0000 (16:17 -0700)]
mm/khugepaged.c: convert VM_BUG_ON() to collapse fail

khugepaged is not yet able to convert PTE-mapped huge pages back to PMD
mapped.  We do not collapse such pages.  See check
khugepaged_scan_pmd().

But if between khugepaged_scan_pmd() and __collapse_huge_page_isolate()
somebody managed to instantiate THP in the range and then split the PMD
back to PTEs we would have a problem --
VM_BUG_ON_PAGE(PageCompound(page)) will get triggered.

It's possible since we drop mmap_sem during collapse to re-take for
write.

Replace the VM_BUG_ON() with graceful collapse fail.

Link: http://lkml.kernel.org/r/20180315152353.27989-1-kirill.shutemov@linux.intel.com
Fixes: b1caa957ae6d ("khugepaged: ignore pmd tables with THP mapped with ptes")
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
3 years agox86/mm: implement free pmd/pte page interfaces
Toshi Kani [Thu, 22 Mar 2018 23:17:24 +0000 (16:17 -0700)]
x86/mm: implement free pmd/pte page interfaces

Implement pud_free_pmd_page() and pmd_free_pte_page() on x86, which
clear a given pud/pmd entry and free up lower level page table(s).

The address range associated with the pud/pmd entry must have been
purged by INVLPG.

Link: http://lkml.kernel.org/r/20180314180155.19492-3-toshi.kani@hpe.com
Fixes: e61ce6ade404e ("mm: change ioremap to set up huge I/O mappings")
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Reported-by: Lei Li <lious.lilei@hisilicon.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
3 years agomm/vmalloc: add interfaces to free unmapped page table
Toshi Kani [Thu, 22 Mar 2018 23:17:20 +0000 (16:17 -0700)]
mm/vmalloc: add interfaces to free unmapped page table

On architectures with CONFIG_HAVE_ARCH_HUGE_VMAP set, ioremap() may
create pud/pmd mappings.  A kernel panic was observed on arm64 systems
with Cortex-A75 in the following steps as described by Hanjun Guo.

 1. ioremap a 4K size, valid page table will build,
 2. iounmap it, pte0 will set to 0;
 3. ioremap the same address with 2M size, pgd/pmd is unchanged,
    then set the a new value for pmd;
 4. pte0 is leaked;
 5. CPU may meet exception because the old pmd is still in TLB,
    which will lead to kernel panic.

This panic is not reproducible on x86.  INVLPG, called from iounmap,
purges all levels of entries associated with purged address on x86.  x86
still has memory leak.

The patch changes the ioremap path to free unmapped page table(s) since
doing so in the unmap path has the following issues:

 - The iounmap() path is shared with vunmap(). Since vmap() only
   supports pte mappings, making vunmap() to free a pte page is an
   overhead for regular vmap users as they do not need a pte page freed
   up.

 - Checking if all entries in a pte page are cleared in the unmap path
   is racy, and serializing this check is expensive.

 - The unmap path calls free_vmap_area_noflush() to do lazy TLB purges.
   Clearing a pud/pmd entry before the lazy TLB purges needs extra TLB
   purge.

Add two interfaces, pud_free_pmd_page() and pmd_free_pte_page(), which
clear a given pud/pmd entry and free up a page for the lower level
entries.

This patch implements their stub functions on x86 and arm64, which work
as workaround.

[akpm@linux-foundation.org: fix typo in pmd_free_pte_page() stub]
Link: http://lkml.kernel.org/r/20180314180155.19492-2-toshi.kani@hpe.com
Fixes: e61ce6ade404e ("mm: change ioremap to set up huge I/O mappings")
Reported-by: Lei Li <lious.lilei@hisilicon.com>
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Wang Xuefeng <wxf.wang@hisilicon.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Chintan Pandya <cpandya@codeaurora.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
3 years agoh8300: remove extraneous __BIG_ENDIAN definition
Arnd Bergmann [Thu, 22 Mar 2018 23:17:17 +0000 (16:17 -0700)]
h8300: remove extraneous __BIG_ENDIAN definition

A bugfix I did earlier caused a build regression on h8300, which defines
the __BIG_ENDIAN macro in a slightly different way than the generic
code:

  arch/h8300/include/asm/byteorder.h:5:0: warning: "__BIG_ENDIAN" redefined

We don't need to define it here, as the same macro is already provided
by the linux/byteorder/big_endian.h, and that version does not conflict.

While this is a v4.16 regression, my earlier patch also got backported
to the 4.14 and 4.15 stable kernels, so we need the fixup there as well.

Link: http://lkml.kernel.org/r/20180313120752.2645129-1-arnd@arndb.de
Fixes: 101110f6271c ("Kbuild: always define endianess in kconfig.h")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
3 years agohugetlbfs: check for pgoff value overflow
Mike Kravetz [Thu, 22 Mar 2018 23:17:13 +0000 (16:17 -0700)]
hugetlbfs: check for pgoff value overflow

A vma with vm_pgoff large enough to overflow a loff_t type when
converted to a byte offset can be passed via the remap_file_pages system
call.  The hugetlbfs mmap routine uses the byte offset to calculate
reservations and file size.

A sequence such as:

  mmap(0x20a00000, 0x600000, 0, 0x66033, -1, 0);
  remap_file_pages(0x20a00000, 0x600000, 0, 0x20000000000000, 0);

will result in the following when task exits/file closed,

  kernel BUG at mm/hugetlb.c:749!
  Call Trace:
    hugetlbfs_evict_inode+0x2f/0x40
    evict+0xcb/0x190
    __dentry_kill+0xcb/0x150
    __fput+0x164/0x1e0
    task_work_run+0x84/0xa0
    exit_to_usermode_loop+0x7d/0x80
    do_syscall_64+0x18b/0x190
    entry_SYSCALL_64_after_hwframe+0x3d/0xa2

The overflowed pgoff value causes hugetlbfs to try to set up a mapping
with a negative range (end < start) that leaves invalid state which
causes the BUG.

The previous overflow fix to this code was incomplete and did not take
the remap_file_pages system call into account.

[mike.kravetz@oracle.com: v3]
Link: http://lkml.kernel.org/r/20180309002726.7248-1-mike.kravetz@oracle.com
[akpm@linux-foundation.org: include mmdebug.h]
[akpm@linux-foundation.org: fix -ve left shift count on sh]
Link: http://lkml.kernel.org/r/20180308210502.15952-1-mike.kravetz@oracle.com
Fixes: 045c7a3f53d9 ("hugetlbfs: fix offset overflow in hugetlbfs mmap")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Nic Losby <blurbdust@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Yisheng Xie <xieyisheng1@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
3 years agolockdep: fix fs_reclaim warning
Tetsuo Handa [Thu, 22 Mar 2018 23:17:10 +0000 (16:17 -0700)]
lockdep: fix fs_reclaim warning

Dave Jones reported fs_reclaim lockdep warnings.

  ============================================
  WARNING: possible recursive locking detected
  4.15.0-rc9-backup-debug+ #1 Not tainted
  --------------------------------------------
  sshd/24800 is trying to acquire lock:
   (fs_reclaim){+.+.}, at: [<0000000084f438c2>] fs_reclaim_acquire.part.102+0x5/0x30

  but task is already holding lock:
   (fs_reclaim){+.+.}, at: [<0000000084f438c2>] fs_reclaim_acquire.part.102+0x5/0x30

  other info that might help us debug this:
   Possible unsafe locking scenario:

         CPU0
         ----
    lock(fs_reclaim);
    lock(fs_reclaim);

   *** DEADLOCK ***

   May be due to missing lock nesting notation

  2 locks held by sshd/24800:
   #0:  (sk_lock-AF_INET6){+.+.}, at: [<000000001a069652>] tcp_sendmsg+0x19/0x40
   #1:  (fs_reclaim){+.+.}, at: [<0000000084f438c2>] fs_reclaim_acquire.part.102+0x5/0x30

  stack backtrace:
  CPU: 3 PID: 24800 Comm: sshd Not tainted 4.15.0-rc9-backup-debug+ #1
  Call Trace:
   dump_stack+0xbc/0x13f
   __lock_acquire+0xa09/0x2040
   lock_acquire+0x12e/0x350
   fs_reclaim_acquire.part.102+0x29/0x30
   kmem_cache_alloc+0x3d/0x2c0
   alloc_extent_state+0xa7/0x410
   __clear_extent_bit+0x3ea/0x570
   try_release_extent_mapping+0x21a/0x260
   __btrfs_releasepage+0xb0/0x1c0
   btrfs_releasepage+0x161/0x170
   try_to_release_page+0x162/0x1c0
   shrink_page_list+0x1d5a/0x2fb0
   shrink_inactive_list+0x451/0x940
   shrink_node_memcg.constprop.88+0x4c9/0x5e0
   shrink_node+0x12d/0x260
   try_to_free_pages+0x418/0xaf0
   __alloc_pages_slowpath+0x976/0x1790
   __alloc_pages_nodemask+0x52c/0x5c0
   new_slab+0x374/0x3f0
   ___slab_alloc.constprop.81+0x47e/0x5a0
   __slab_alloc.constprop.80+0x32/0x60
   __kmalloc_track_caller+0x267/0x310
   __kmalloc_reserve.isra.40+0x29/0x80
   __alloc_skb+0xee/0x390
   sk_stream_alloc_skb+0xb8/0x340
   tcp_sendmsg_locked+0x8e6/0x1d30
   tcp_sendmsg+0x27/0x40
   inet_sendmsg+0xd0/0x310
   sock_write_iter+0x17a/0x240
   __vfs_write+0x2ab/0x380
   vfs_write+0xfb/0x260
   SyS_write+0xb6/0x140
   do_syscall_64+0x1e5/0xc05
   entry_SYSCALL64_slow_path+0x25/0x25

This warning is caused by commit d92a8cfcb37e ("locking/lockdep:
Rework FS_RECLAIM annotation") which replaced the use of
lockdep_{set,clear}_current_reclaim_state() in __perform_reclaim()
and lockdep_trace_alloc() in slab_pre_alloc_hook() with
fs_reclaim_acquire()/ fs_reclaim_release().

Since __kmalloc_reserve() from __alloc_skb() adds __GFP_NOMEMALLOC |
__GFP_NOWARN to gfp_mask, and all reclaim path simply propagates
__GFP_NOMEMALLOC, fs_reclaim_acquire() in slab_pre_alloc_hook() is
trying to grab the 'fake' lock again when __perform_reclaim() already
grabbed the 'fake' lock.

The

  /* this guy won't enter reclaim */
  if ((current->flags & PF_MEMALLOC) && !(gfp_mask & __GFP_NOMEMALLOC))
          return false;

test which causes slab_pre_alloc_hook() to try to grab the 'fake' lock
was added by commit cf40bd16fdad ("lockdep: annotate reclaim context
(__GFP_NOFS)").  But that test is outdated because PF_MEMALLOC thread
won't enter reclaim regardless of __GFP_NOMEMALLOC after commit
341ce06f69ab ("page allocator: calculate the alloc_flags for allocation
only once") added the PF_MEMALLOC safeguard (

  /* Avoid recursion of direct reclaim */
  if (p->flags & PF_MEMALLOC)
          goto nopage;

in __alloc_pages_slowpath()).

Thus, let's fix outdated test by removing __GFP_NOMEMALLOC test and
allow __need_fs_reclaim() to return false.

Link: http://lkml.kernel.org/r/201802280650.FJC73911.FOSOMLJVFFQtHO@I-love.SAKURA.ne.jp
Fixes: d92a8cfcb37ecd13 ("locking/lockdep: Rework FS_RECLAIM annotation")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Tested-by: Dave Jones <davej@codemonkey.org.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Nick Piggin <npiggin@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Nikolay Borisov <nborisov@suse.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: <stable@vger.kernel.org> [4.14+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
3 years agoMAINTAINERS: update Mark Fasheh's e-mail
Mark Fasheh [Thu, 22 Mar 2018 23:17:05 +0000 (16:17 -0700)]
MAINTAINERS: update Mark Fasheh's e-mail

I'd like to use my personal e-mail for Ocfs2 requests and review.

Link: http://lkml.kernel.org/r/20180311231356.9385-1-mfasheh@versity.com
Signed-off-by: Mark Fasheh <mark@fasheh.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
3 years agomm/mempolicy.c: avoid use uninitialized preferred_node
Yisheng Xie [Thu, 22 Mar 2018 23:17:02 +0000 (16:17 -0700)]
mm/mempolicy.c: avoid use uninitialized preferred_node

Alexander reported a use of uninitialized memory in __mpol_equal(),
which is caused by incorrect use of preferred_node.

When mempolicy in mode MPOL_PREFERRED with flags MPOL_F_LOCAL, it uses
numa_node_id() instead of preferred_node, however, __mpol_equal() uses
preferred_node without checking whether it is MPOL_F_LOCAL or not.

[akpm@linux-foundation.org: slight comment tweak]
Link: http://lkml.kernel.org/r/4ebee1c2-57f6-bcb8-0e2d-1833d1ee0bb7@huawei.com
Fixes: fc36b8d3d819 ("mempolicy: use MPOL_F_LOCAL to Indicate Preferred Local Policy")
Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com>
Reported-by: Alexander Potapenko <glider@google.com>
Tested-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
3 years agodrm/ast: Fixed 1280x800 Display Issue
Y.C. Chen [Mon, 12 Mar 2018 03:40:23 +0000 (11:40 +0800)]
drm/ast: Fixed 1280x800 Display Issue

The original ast driver cannot display properly if the resolution is 1280x800 and the pixel clock is 83.5MHz.
Here is the update to fix it.

Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>