muen/linux.git
3 years agoMerge branch 'fixes' into next/soc
Olof Johansson [Mon, 31 Dec 2018 19:54:03 +0000 (11:54 -0800)]
Merge branch 'fixes' into next/soc

Merge in fixes here, since the last batch didn't make it in before the
release of 4.20, and we might as well group them with this set of
patches.

* fixes: (822 commits)
  arm64: dts: renesas: draak: Fix CVBS input
  ARM: dts: Fix OMAP4430 SDP Ethernet startup
  ARM: dts: am335x-pdu001: Fix polarity of card detection input
  ARM: OMAP1: ams-delta: Fix audio permanently muted
  ARM: dts: omap5: Fix dual-role mode on Super-Speed port
  arm64: dts: rockchip: fix rk3399-rockpro64 regulator gpios
  ARM: dts: imx7d-nitrogen7: Fix the description of the Wifi clock
  ARM: imx: update the cpu power up timing setting on i.mx6sx
  Revert "arm64: dts: marvell: add CPU Idle power state support on Armada 7K/8K"
  ARM: dts: imx7d-pico: Describe the Wifi clock
  ARM: dts: realview: Fix some more duplicate regulator nodes
  MAINTAINERS: update entry for MMP platform
  ARM: mmp/mmp2: fix cpu_is_mmp2() on mmp2-dt
  MAINTAINERS: mediatek: Update SoC entry
  ARM: dts: bcm2837: Fix polarity of wifi reset GPIOs
  + Linux 4.20-rc5

Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoMerge tag 'renesas-fixes2-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel...
Arnd Bergmann [Thu, 20 Dec 2018 16:36:08 +0000 (17:36 +0100)]
Merge tag 'renesas-fixes2-for-v4.20' of git://git./linux/kernel/git/horms/renesas into fixes

Second Round of Renesas ARM Based SoC Fixes for v4.20

* R-Car D3 (r8a77995) SoC based Draak board
  - Correct CVBS input to allow probing of the VIN

* tag 'renesas-fixes2-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  arm64: dts: renesas: draak: Fix CVBS input

3 years agoarm64: dts: renesas: draak: Fix CVBS input
Laurent Pinchart [Mon, 10 Dec 2018 09:43:55 +0000 (11:43 +0200)]
arm64: dts: renesas: draak: Fix CVBS input

A typo in the adv7180 DT node prevents successful probing of the VIN.
Fix it.

Fixes: 6a0942c20f5c ("arm64: dts: renesas: draak: Describe CVBS input")
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
3 years agoMerge tag 'v4.20-rockchip-dts64fixes-2' of git://git.kernel.org/pub/scm/linux/kernel...
Olof Johansson [Wed, 12 Dec 2018 22:21:26 +0000 (14:21 -0800)]
Merge tag 'v4.20-rockchip-dts64fixes-2' of git://git./linux/kernel/git/mmind/linux-rockchip into fixes

rockpro64 regulator fixes that cause stability issues

* tag 'v4.20-rockchip-dts64fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: fix rk3399-rockpro64 regulator gpios

Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoMerge tag 'omap-for-v4.20/fixes-rc6' of git://git.kernel.org/pub/scm/linux/kernel...
Olof Johansson [Wed, 12 Dec 2018 22:20:02 +0000 (14:20 -0800)]
Merge tag 'omap-for-v4.20/fixes-rc6' of git://git./linux/kernel/git/tmlind/linux-omap into fixes

Few device fixes for omaps

Here's a collection of minor fixes for annoying usability issues
people have noticed using various devices.

There are two regression fixes:

- A regression fix for omap5 usb3 dual role mode

- A regression fix to ams-delta audio being muted permanently

And two one-liners:

- Fix polarity for am335x-pdu001 SD card detection

- Fix non-working omap4-sdp Ethernet startup for rebind

It would be nice to get these merged during the -rc cycle if
possible. Naturally these can all wait for the merge window too
if we start running out of time.

* tag 'omap-for-v4.20/fixes-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: Fix OMAP4430 SDP Ethernet startup
  ARM: dts: am335x-pdu001: Fix polarity of card detection input
  ARM: OMAP1: ams-delta: Fix audio permanently muted
  ARM: dts: omap5: Fix dual-role mode on Super-Speed port

Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoARM: omap2: avoid section mismatch warning
Arnd Bergmann [Mon, 10 Dec 2018 21:58:36 +0000 (22:58 +0100)]
ARM: omap2: avoid section mismatch warning

WARNING: vmlinux.o(.text+0x27530): Section mismatch in reference from the function am43xx_suspend_init() to the function .init.text:am43xx_map_scu()
The function am43xx_suspend_init() references
the function __init am43xx_map_scu().
This is often because am43xx_suspend_init lacks a __init
annotation or the annotation of am43xx_map_scu is wrong.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoMerge tag 'amlogic-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman...
Olof Johansson [Wed, 12 Dec 2018 22:03:48 +0000 (14:03 -0800)]
Merge tag 'amlogic-soc' of https://git./linux/kernel/git/khilman/linux-amlogic into next/soc

soc: Amlogic updates for v4.21
- ARM: meson: Kconfig: select HAVE_ARM_TWD and ARM_GLOBAL_TIMER
- misc MAINTAINERS updates

* tag 'amlogic-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  ARM: meson: select HAVE_ARM_TWD and ARM_GLOBAL_TIMER
  MAINTAINERS: add drivers/soc/amlogic/ to amlogic list
  MAINTAINERS: Remove myself from the list

Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoMerge tag 'omap-for-v4.21/omap1-signed' of git://git.kernel.org/pub/scm/linux/kernel...
Olof Johansson [Wed, 12 Dec 2018 21:58:34 +0000 (13:58 -0800)]
Merge tag 'omap-for-v4.21/omap1-signed' of git://git./linux/kernel/git/tmlind/linux-omap into next/soc

Changes for omap1 variants for v4.21 merge window

In this set of changes Aaro Koskinen revives Palm Tungsten E for the
MMC and USB making it usable again. And Janusz Krzysztofik follows up
on the clean-up of  ams-delta GPIO handling. The other changes are
clean-up for DEFINE_SHOW_ATTRIBUTE by Yangtao Li.

* tag 'omap-for-v4.21/omap1-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP1: fix USB configuration for device-only setups
  ARM: OMAP1: add MMC configuration for Palm Tungsten E
  ARM: OMAP1: devices: configure omap1_spi100k only on OMAP7xx
  ARM: OMAP1/2: fix SoC name printing
  ARM: OMAP1: ams-delta: Move AMS_DELTA_LATCH2_NGPIO to the board file
  ARM: OMAP1: ams-delta: Drop unused symbols from the board header
  ARM: OMAP1: ams-delta: Drop board specific global GPIO numbers
  ARM: OMAP: PM: Change to use DEFINE_SHOW_ATTRIBUTE macro
  ARM: OMAP1: clock: Change to use DEFINE_SHOW_ATTRIBUTE macro
  ARM: OMAP1: ams-delta: Provide GPIO lookup table for LED device
  ARM: OMAP1: ams-delta: make board header file local to mach-omap1

Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoARM: tegra: avoid section mismatch warning
Arnd Bergmann [Mon, 10 Dec 2018 21:58:37 +0000 (22:58 +0100)]
ARM: tegra: avoid section mismatch warning

WARNING: vmlinux.o(.text+0x39ecc): Section mismatch in reference from the function tegra114_gic_cpu_pm_registration() to the (unknown reference) .init.rodata:(unknown)
The function tegra114_gic_cpu_pm_registration() references
the (unknown reference) __initconst (unknown).
This is often because tegra114_gic_cpu_pm_registration lacks a __initconst
annotation or the annotation of (unknown) is wrong.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoARM: ks8695: fix section mismatch warning
Arnd Bergmann [Mon, 10 Dec 2018 21:58:38 +0000 (22:58 +0100)]
ARM: ks8695: fix section mismatch warning

WARNING: vmlinux.o(.text+0x13250): Section mismatch in reference from the function acs5k_i2c_init() to the (unknown reference) .init.data:(unknown)
The function acs5k_i2c_init() references
the (unknown reference) __initdata (unknown).
This is often because acs5k_i2c_init lacks a __initdata
annotation or the annotation of (unknown) is wrong.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoARM: pxa: avoid section mismatch warning
Arnd Bergmann [Mon, 10 Dec 2018 21:58:39 +0000 (22:58 +0100)]
ARM: pxa: avoid section mismatch warning

WARNING: vmlinux.o(.text+0x19f90): Section mismatch in reference from the function littleton_init_lcd() to the function .init.text:pxa_set_fb_info()
The function littleton_init_lcd() references
the function __init pxa_set_fb_info().
This is often because littleton_init_lcd lacks a __init
annotation or the annotation of pxa_set_fb_info is wrong.

WARNING: vmlinux.o(.text+0xf824): Section mismatch in reference from the function zeus_register_ohci() to the function .init.text:pxa_set_ohci_info()
The function zeus_register_ohci() references
the function __init pxa_set_ohci_info().
This is often because zeus_register_ohci lacks a __init
annotation or the annotation of pxa_set_ohci_info is wrong.

WARNING: vmlinux.o(.text+0xf95c): Section mismatch in reference from the function cm_x300_init_u2d() to the function .init.text:pxa3xx_set_u2d_info()
The function cm_x300_init_u2d() references
the function __init pxa3xx_set_u2d_info().
This is often because cm_x300_init_u2d lacks a __init
annotation or the annotation of pxa3xx_set_u2d_info is wrong.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoARM: mmp: fix pxa168_device_usb_phy use on aspenite
Arnd Bergmann [Mon, 10 Dec 2018 20:43:02 +0000 (21:43 +0100)]
ARM: mmp: fix pxa168_device_usb_phy use on aspenite

This one ended up in the wrong header file, causing a build failure
on at least one platform:

arch/arm/mach-mmp/aspenite.c: In function 'common_init':
arch/arm/mach-mmp/aspenite.c:260:28: error: 'pxa168_device_usb_phy' undeclared (first use in this function); did you mean 'pxa168_device_ssp5'?

We can just include both the pxa168.h and pxa910.h headers to make
that work, which gets us to the next failure:

arch/arm/mach-mmp/aspenite.o: In function `common_init':
aspenite.c:(.init.text+0x1c0): undefined reference to `pxa168_device_usb_phy'

This is solved by using the matching ifdef check around the
USB device registration, enabling them only when either USB
host or gadget mode are enabled.

Fixes: a225daf72ee7 ("ARM: mmp: add a pxa-usb-phy device")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoARM: mmp: fix timer_init calls
Arnd Bergmann [Mon, 10 Dec 2018 20:43:01 +0000 (21:43 +0100)]
ARM: mmp: fix timer_init calls

The change to passing the timer frequency as a function argument
was a good idea, but caused a build failure for one user that
was missed in the update:

arch/arm/mach-mmp/time.c: In function 'mmp_dt_init_timer':
arch/arm/mach-mmp/time.c:242:2: error: implicit declaration of function 'timer_init'; did you mean 'hrtimer_init'? [-Werror=implicit-function-declaration]

Change that as well to fix the build error, and rename the
function to put it into a proper namespace and make it clearer
what is actually going on.

I saw that the high 6500000 HZ frequency was previously only
set with CONFIG_MMP2, but is now also used with MMP (pxa910),
so I'm changing that back here. Please make sure that the
frequencies are all correct now.

Fixes: f36797ee4380 ("ARM: mmp/mmp2: dt: enable the clock")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoMerge tag 'imx-soc-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo...
Olof Johansson [Wed, 12 Dec 2018 21:52:48 +0000 (13:52 -0800)]
Merge tag 'imx-soc-4.21' of git://git./linux/kernel/git/shawnguo/linux into next/soc

i.MX SoC changes for 4.21:
 - An improvement on i.MX debugging options that only defines
   DEBUG_IMX_UART_PORT if needed, so that the option will not be present
   in the kernel config when DEBUG_LL is disabled.
 - Adds the necessary platform support for i.MX7ULP SoC and configures
   power mode to Partial Stop mode 3 with system/bus clock enabled.
   Otherwise the default STOP mode will gate off system/bus clock when
   WFI gets executed on i.MX7ULP.
 - A fix from Arnd on SOC_IMX7ULP option dependency.

* tag 'imx-soc-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: imx: fix dependencies on imx7ulp
  ARM: imx: add initial support for imx7ulp
  ARM: debug-imx: only define DEBUG_IMX_UART_PORT if needed

Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoMerge tag 'samsung-soc-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk...
Olof Johansson [Wed, 12 Dec 2018 21:52:15 +0000 (13:52 -0800)]
Merge tag 'samsung-soc-4.21' of https://git./linux/kernel/git/krzk/linux into next/soc

Samsung mach/soc changes for v4.21

Just cleanups of: legacy way of setting external wakeup interrupts, old
power management debugging functions and duplicated secondary startup
initialization.

* tag 'samsung-soc-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: exynos: Remove secondary startup initialization from smp_prepare_cpus
  ARM: samsung: Limit SAMSUNG_PM_DEBUG config option to non-Exynos platforms
  ARM: exynos: Remove no longer needed s3c_pm_check_*() calls
  ARM: exynos: Remove legacy setting of external wakeup interrupts
  ARM: s5pv210: Remove legacy setting of external wakeup interrupts

Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoMerge tag 'sunxi-core-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git...
Olof Johansson [Wed, 12 Dec 2018 21:51:29 +0000 (13:51 -0800)]
Merge tag 'sunxi-core-for-4.21' of https://git./linux/kernel/git/sunxi/linux into next/soc

Allwinner core changes for 4.21

A few patches to enable a new Allwinner SoC based on an armv5 CPU.

* tag 'sunxi-core-for-4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  dt-bindings: watchdog: Add Allwinner ARMv5 F1C100s wdt
  ARM: sunxi: add Allwinner ARMv5 SoCs
  dt-bindings: arm: Add new Allwinner ARMv5 F1C100s SoC
  ARM: Check ARCH_MULTI_V7 to differentiate ARMv5/v7 Allwinner SoCs

Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoMerge tag 'davinci-for-v4.21/soc' of git://git.kernel.org/pub/scm/linux/kernel/git...
Olof Johansson [Wed, 12 Dec 2018 21:51:05 +0000 (13:51 -0800)]
Merge tag 'davinci-for-v4.21/soc' of git://git./linux/kernel/git/nsekhar/linux-davinci into next/soc

DaVinci SoC updates for v4.21
-----------------------------

This set of patches moves DaVinci one step closer to
not relying on at24 platform data by relying on nvmem
cell lookups instead.

Once other dependencies are merged, for v4.22, plan is
to merge another series of patches removing at24
platform data.

* tag 'davinci-for-v4.21/soc' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: davinci: da850-evm: remove unnecessary include
  ARM: davinci: dm850-evm: use cell nvmem lookup for mac address
  ARM: davinci: mityomapl138: use cell nvmem lookup for mac address
  ARM: davinci: da830-evm: use cell nvmem lookup for mac address
  ARM: davinci: dm646x-evm: use cell nvmem lookup for mac address
  ARM: davinci: dm644x-evm: use cell nvmem lookup for mac address
  ARM: davinci: dm365-evm: use cell nvmem lookup for mac address

Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoMerge tag 'renesas-soc-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel...
Olof Johansson [Wed, 12 Dec 2018 21:49:58 +0000 (13:49 -0800)]
Merge tag 'renesas-soc-for-v4.21' of https://git./linux/kernel/git/horms/renesas into next/soc

Renesas ARM Based SoC Updates for v4.21

* pm-rmobile driver
  - Move to drivers/soc/renesas/
  - Clean up struct rmobile_pm_domain
* Renesas SoC Kconfig Symbols
  - Move symbols for ARM and SoCs to drivers/soc/renesas/
  - Hide ARCH_RZN1 to improve consistency
* SH-Mobile AG5 (sh73a0) SoC: Remove obsolete inclusion of <asm/smp_twd.h>
* Restrict TWD and SCU to Renesas ARM based SoCs where they are present
* Enable GPIOLIB on Renesas arm64 based SoCs to allow GPIO driver selection

* tag 'renesas-soc-for-v4.21' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: R-Mobile: Move pm-rmobile to drivers/soc/renesas/
  ARM: shmobile: R-Mobile: Clean up struct rmobile_pm_domain
  ARM: shmobile: Move SoC Kconfig symbols to drivers/soc/renesas/
  arm64: renesas: Move SoC Kconfig symbols to drivers/soc/renesas/
  ARM: shmobile: Hide ARCH_RZN1 to improve consistency
  ARM: shmobile: sh73a0: Remove obsolete inclusion of <asm/smp_twd.h>
  ARM: shmobile: Restrict TWD support to SoCs that have it
  ARM: shmobile: Restrict SCU support to SoCs that have it
  arm64: renesas: Enable GPIOLIB to allow GPIO driver selection

Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoMerge branch 'omap1-usb-fix' into omap-for-v4.21/omap1
Tony Lindgren [Tue, 11 Dec 2018 16:14:58 +0000 (08:14 -0800)]
Merge branch 'omap1-usb-fix' into omap-for-v4.21/omap1

3 years agoARM: OMAP1: fix USB configuration for device-only setups
Aaro Koskinen [Tue, 4 Dec 2018 17:57:42 +0000 (19:57 +0200)]
ARM: OMAP1: fix USB configuration for device-only setups

Currently we do USB configuration only if the host mode (CONFIG_USB)
is enabled. But it should be done also in the case of device-only setups,
so change the condition to CONFIG_USB_SUPPORT. This allows to use
omap_udc on Palm Tungsten E.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Tony Lindgren <tony@atomide.com>
3 years agoARM: OMAP1: add MMC configuration for Palm Tungsten E
Aaro Koskinen [Tue, 4 Dec 2018 17:58:12 +0000 (19:58 +0200)]
ARM: OMAP1: add MMC configuration for Palm Tungsten E

Add initial MMC configuration for Palm Tungsten E to allow using a proper
rootfs on the device. This still assumes the bootloader enabling the MMC,
and that the card is always present and writeable.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Tony Lindgren <tony@atomide.com>
3 years agoARM: imx: fix dependencies on imx7ulp
Arnd Bergmann [Mon, 10 Dec 2018 20:47:59 +0000 (21:47 +0100)]
ARM: imx: fix dependencies on imx7ulp

The i.MX7D configuration was reworked, but that change did
not get propagated into the newly added i.MX7ULP, which now
produces a Kconfig warning:

WARNING: unmet direct dependencies detected for HAVE_ARM_ARCH_TIMER
  Depends on [n]: CPU_V7 [=n]
  Selected by [y]:
  - SOC_IMX7ULP [=y] && ARCH_MXC [=y] && (ARCH_MULTI_V7 [=n] || ARM_SINGLE_ARMV7M [=y])

Change it to work the same way as i.MX7D.

Fixes: 1a1f919eb52e ("ARM: imx: Provide support for NXP i.MX7D Cortex-M4")
Fixes: de70d0e9d43d ("ARM: imx: add initial support for imx7ulp")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
3 years agoARM: meson: select HAVE_ARM_TWD and ARM_GLOBAL_TIMER
Martin Blumenstingl [Fri, 23 Nov 2018 19:53:06 +0000 (20:53 +0100)]
ARM: meson: select HAVE_ARM_TWD and ARM_GLOBAL_TIMER

The 32-bit Meson SoCs use multiple Cortex-A9 (Meson8 and Meson8m2) or
Cortex-A5 (Meson8b) CPU cores. These come with the "ARM global timer"
and "Timer-Watchdog" (aka TWD, which provides both a per-cpu local timer
and watchdog).

Selecting ARM_GLOBAL_TIMER and HAVE_ARM_TWD allows us to add the timers
to the SoC.dtsi files.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
3 years agoMAINTAINERS: add drivers/soc/amlogic/ to amlogic list
Corentin Labbe [Mon, 10 Dec 2018 19:45:54 +0000 (19:45 +0000)]
MAINTAINERS: add drivers/soc/amlogic/ to amlogic list

While sending a patch for drivers/soc/amlogic/Kconfig, I saw that
getmaintainer.pl give nobody for it.  This patchs adds
drivers/soc/amlogic/ to amlogic maintainers.

Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
3 years agoARM: imx: add initial support for imx7ulp
A.s. Dong [Sat, 10 Nov 2018 15:13:04 +0000 (15:13 +0000)]
ARM: imx: add initial support for imx7ulp

The i.MX 7ULP family of processors features NXP's advanced implementation
of the Arm Cortex-A7 core, the Arm Cortex-M4 core, as well as a 3D and 2D
Graphics Processing Units (GPUs).

This patch aims to add an initial support for imx7ulp. Note that we need
configure power mode to Partial Stop mode 3 with system/bus clock enabled
first as the default enabled STOP mode will gate off system/bus clock when
execute WFI in MX7ULP SoC.

And there's still no MXC_CPU_IMX7ULP IDs read from register as ULP has no
anatop as before. So we encode one with 0xff in reverse order in case new
ones will be in the future.

Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
3 years agoARM: debug-imx: only define DEBUG_IMX_UART_PORT if needed
Uwe Kleine-König [Wed, 28 Nov 2018 09:04:16 +0000 (10:04 +0100)]
ARM: debug-imx: only define DEBUG_IMX_UART_PORT if needed

If debugging on i.MX is enabled DEBUG_IMX_UART_PORT defines which UART
is used for the debug output. If however debugging is off don't only
hide the then unused config item but drop it completely by using a
dependency instead of a conditional prompt.

This fixes DEBUG_IMX_UART_PORT being present in the kernel config even
if DEBUG_LL is disabled.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
3 years agoMerge tag 'mvebu-fixes-4.20-1' of git://git.infradead.org/linux-mvebu into fixes
Olof Johansson [Sun, 9 Dec 2018 18:28:02 +0000 (10:28 -0800)]
Merge tag 'mvebu-fixes-4.20-1' of git://git.infradead.org/linux-mvebu into fixes

mvebu fixes for 4.20

Adding CPU Idle state in the device tree for Armada 8040 seems to
breaks boot on some board, so let's revert it waiting for a better
solution.

* tag 'mvebu-fixes-4.20-1' of git://git.infradead.org/linux-mvebu:
  Revert "arm64: dts: marvell: add CPU Idle power state support on Armada 7K/8K"

Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoMerge tag 'sunxi-fixes-for-4.20' of https://git.kernel.org/pub/scm/linux/kernel/git...
Olof Johansson [Sun, 9 Dec 2018 18:27:17 +0000 (10:27 -0800)]
Merge tag 'sunxi-fixes-for-4.20' of https://git./linux/kernel/git/sunxi/linux into fixes

Allwinner fixes for 4.20

One small fix for a regulator range on the Banana Pi M3

* tag 'sunxi-fixes-for-4.20' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  ARM: dts: sun8i: a83t: bananapi-m3: increase vcc-pd voltage to 3.3V

Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoMerge tag 'imx-fixes-4.20-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawngu...
Olof Johansson [Sun, 9 Dec 2018 18:26:36 +0000 (10:26 -0800)]
Merge tag 'imx-fixes-4.20-3' of git://git./linux/kernel/git/shawnguo/linux into fixes

i.MX fixes for 4.20, round 3:
 - A couple of fixes on imx7d-pico and imx7d-nitrogen7 boards to correct
   the description of the Wifi clock.
 - Change SW2ISO count to get a safer ARM LDO ramp-up time, so that
   different boards can be covered. This fixes the ARM LDO failure seen
   on some customer boards.

* tag 'imx-fixes-4.20-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: dts: imx7d-nitrogen7: Fix the description of the Wifi clock
  ARM: imx: update the cpu power up timing setting on i.mx6sx
  ARM: dts: imx7d-pico: Describe the Wifi clock

Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoARM: dts: Fix OMAP4430 SDP Ethernet startup
Russell King - ARM Linux [Fri, 7 Dec 2018 17:17:07 +0000 (09:17 -0800)]
ARM: dts: Fix OMAP4430 SDP Ethernet startup

It was noticed that unbinding and rebinding the KSZ8851 ethernet
resulted in the driver reporting "failed to read device ID" at probe.
Probing the reset line with a 'scope while repeatedly attempting to
bind the driver in a shell loop revealed that the KSZ8851 RSTN pin is
constantly held at zero, meaning the device is held in reset, and
does not respond on the SPI bus.

Experimentation with the startup delay on the regulator set to 50ms
shows that the reset is positively released after 20ms.

Schematics for this board are not available, and the traces are buried
in the inner layers of the board which makes tracing where the RSTN pin
extremely difficult.  We can only guess that the RSTN pin is wired to a
reset generator chip driven off the ethernet supply, which fits the
observed behaviour.

Include this delay in the regulator startup delay - effectively
treating the reset as a "supply stable" indicator.

This can not be modelled as a delay in the KSZ8851 driver since the
reset generation is board specific - if the RSTN pin had been wired to
a GPIO, reset could be released earlier via the already provided support
in the KSZ8851 driver.

This also got confirmed by Peter Ujfalusi <peter.ujfalusi@ti.com> based
on Blaze schematics that should be very close to SDP4430:

TPS22902YFPR is used as the regulator switch (gpio48 controlled):
Convert arm boot_lock to raw The VOUT is routed to TPS3808G01DBV.
(SCH Note: Threshold set at 90%. Vsense: 0.405V).

According to the TPS3808 data sheet the RESET delay time when Ct is
open (this is the case in the schema): MIN/TYP/MAX: 12/20/28 ms.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
[tony@atomide.com: updated with notes from schematics from Peter]
Signed-off-by: Tony Lindgren <tony@atomide.com>
3 years agoARM: dts: am335x-pdu001: Fix polarity of card detection input
Felix Brack [Fri, 30 Nov 2018 14:54:46 +0000 (15:54 +0100)]
ARM: dts: am335x-pdu001: Fix polarity of card detection input

When a micro SD card is inserted in the PDU001 card cage, the card
detection switch is opened and the corresponding GPIO input is driven
by a pull-up. Hence change the active level of the card detection
input from low to high.

Signed-off-by: Felix Brack <fb@ltec.ch>
Signed-off-by: Tony Lindgren <tony@atomide.com>
3 years agoMerge branch 'audio-fix' into omap-for-v4.20/fixes
Tony Lindgren [Fri, 7 Dec 2018 16:27:06 +0000 (08:27 -0800)]
Merge branch 'audio-fix' into omap-for-v4.20/fixes

3 years agoARM: OMAP1: ams-delta: Fix audio permanently muted
Janusz Krzysztofik [Fri, 23 Nov 2018 11:19:45 +0000 (12:19 +0100)]
ARM: OMAP1: ams-delta: Fix audio permanently muted

Since commit 1137ceee76ba ("ARM: OMAP1: ams-delta: Don't request unused
GPIOs"), on-board audio has appeared muted.  Believed to be unused GPIO
pin "hookflash1", apparently set high regardless of the corresponding
bit of "latch2" port attempted to be set low during .init_machine(),
has been identified as the reason.

According to Amstrad E3 wiki, the purpose of the pin hasn't been
clearly identified.  Original Amstrad software used to produce a high
pulse on it when the phone was taken off hook or recall was pressed.
With the current finding, we can assume the pin provides a kind of
audio mute function.

Proper resolution of the issue should be done in two steps:
- resolution of an issue with the pin state not reflecting the value
  the corresponding bit of the port was attempted to be initialized
  with,
- extension of on-board audio driver with a new control.

For now, rename the pin to "audio_mute" to reflect its function and,
as a quick fix, hogg it as output low so on-board audio can produce
audible sound again.

Fixes: 1137ceee76ba ("ARM: OMAP1: ams-delta: Don't request unused GPIOs")
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
3 years agoARM: dts: omap5: Fix dual-role mode on Super-Speed port
Roger Quadros [Wed, 5 Dec 2018 17:27:44 +0000 (19:27 +0200)]
ARM: dts: omap5: Fix dual-role mode on Super-Speed port

OMAP5's Super-Speed USB port has a software mailbox register
that needs to be fed with VBUS and ID events from an external
VBUS/ID comparator.

Without this, Host role will not work correctly.

Fixes: 656c1a65ab55 ("ARM: dts: omap5: enable OTG role for DWC3 controller")
Reported-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
3 years agoarm64: dts: rockchip: fix rk3399-rockpro64 regulator gpios
Oskari Lemmela [Sat, 1 Dec 2018 10:08:16 +0000 (12:08 +0200)]
arm64: dts: rockchip: fix rk3399-rockpro64 regulator gpios

Rockpro64 is not able boot if GPIO1_C1 pin is pulled high
before loading linux kernel.

In rockpro64 GPIO1_C1 pin is connected vdd_cpu_b regulator
VSEL pin. Pin should be pulled down in normal operation and
pulled high in suspend.

PMIC LDO_REG2 is connected to touch panel connector.
Rename regulator and set it to correct voltage.

PCIe power is controller by GPIO1_D0.

Schematics can be downloaded from:
http://files.pine64.org/doc/rockpro64/rockpro64_v21-SCH.pdf

Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
Acked-by: Akash Gajjar <Akash_Gajjar@mentor.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
3 years agoARM: davinci: da850-evm: remove unnecessary include
Bartosz Golaszewski [Tue, 13 Nov 2018 14:01:17 +0000 (15:01 +0100)]
ARM: davinci: da850-evm: remove unnecessary include

The include file for at24_platform_data is not needed in this file.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
3 years agoARM: davinci: dm850-evm: use cell nvmem lookup for mac address
Bartosz Golaszewski [Tue, 13 Nov 2018 14:01:16 +0000 (15:01 +0100)]
ARM: davinci: dm850-evm: use cell nvmem lookup for mac address

We now support nvmem lookups and cell definitions for machine code.
Add relevant data structures for the mac-address stored in at24 EEPROM.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
3 years agoARM: davinci: mityomapl138: use cell nvmem lookup for mac address
Bartosz Golaszewski [Tue, 13 Nov 2018 14:01:15 +0000 (15:01 +0100)]
ARM: davinci: mityomapl138: use cell nvmem lookup for mac address

We now support nvmem lookups and cell definitions for machine code.
Add relevant data structures for the mac-address stored in at24 EEPROM.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
3 years agoARM: davinci: da830-evm: use cell nvmem lookup for mac address
Bartosz Golaszewski [Tue, 13 Nov 2018 14:01:14 +0000 (15:01 +0100)]
ARM: davinci: da830-evm: use cell nvmem lookup for mac address

We now support nvmem lookups and cell definitions for machine code.
Add relevant data structures for the mac-address stored in at24 EEPROM.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
3 years agoARM: davinci: dm646x-evm: use cell nvmem lookup for mac address
Bartosz Golaszewski [Tue, 13 Nov 2018 14:01:13 +0000 (15:01 +0100)]
ARM: davinci: dm646x-evm: use cell nvmem lookup for mac address

We now support nvmem lookups and cell definitions for machine code.
Add relevant data structures for the mac-address stored in at24 EEPROM.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
3 years agoARM: davinci: dm644x-evm: use cell nvmem lookup for mac address
Bartosz Golaszewski [Tue, 13 Nov 2018 14:01:12 +0000 (15:01 +0100)]
ARM: davinci: dm644x-evm: use cell nvmem lookup for mac address

We now support nvmem lookups and cell definitions for machine code.
Add relevant data structures for the mac-address stored in at24 EEPROM.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
3 years agoARM: davinci: dm365-evm: use cell nvmem lookup for mac address
Bartosz Golaszewski [Tue, 13 Nov 2018 14:01:11 +0000 (15:01 +0100)]
ARM: davinci: dm365-evm: use cell nvmem lookup for mac address

We now support nvmem lookups and cell definitions for machine code.
Add relevant data structures for the mac-address stored in at24 EEPROM.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
3 years agoARM: dts: imx7d-nitrogen7: Fix the description of the Wifi clock
Fabio Estevam [Wed, 5 Dec 2018 11:05:30 +0000 (09:05 -0200)]
ARM: dts: imx7d-nitrogen7: Fix the description of the Wifi clock

According to bindings/regulator/fixed-regulator.txt the 'clocks' and
'clock-names' properties are not valid ones.

In order to turn on the Wifi clock the correct location for describing
the CLKO2 clock is via a mmc-pwrseq handle, so do it accordingly.

Fixes: 56354959cfec ("ARM: dts: imx: add Boundary Devices Nitrogen7 board")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
3 years agoARM: imx: update the cpu power up timing setting on i.mx6sx
Anson Huang [Tue, 4 Dec 2018 03:17:45 +0000 (03:17 +0000)]
ARM: imx: update the cpu power up timing setting on i.mx6sx

The sw2iso count should cover ARM LDO ramp-up time,
the MAX ARM LDO ramp-up time may be up to more than
100us on some boards, this patch sets sw2iso to 0xf
(~384us) which is the reset value, and it is much
more safe to cover different boards, since we have
observed that some customer boards failed with current
setting of 0x2.

Fixes: 05136f0897b5 ("ARM: imx: support arm power off in cpuidle for i.mx6sx")
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
3 years agodt-bindings: watchdog: Add Allwinner ARMv5 F1C100s wdt
Mesih Kilinc [Sun, 2 Dec 2018 20:23:49 +0000 (23:23 +0300)]
dt-bindings: watchdog: Add Allwinner ARMv5 F1C100s wdt

Allwinner ARMv5 F1C100s has similar watchdog timer to sun6i A31.
Add definition for it.

Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
3 years agoRevert "arm64: dts: marvell: add CPU Idle power state support on Armada 7K/8K"
Baruch Siach [Tue, 4 Dec 2018 15:46:02 +0000 (17:46 +0200)]
Revert "arm64: dts: marvell: add CPU Idle power state support on Armada 7K/8K"

This reverts commit 8ed46368776b3bc93d74c1f8f2bfb9fd8a9ad805.

This commit breaks boot on Armada 8K based systems. Reverting it makes
affected systems boot again.

Reported-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
3 years agoARM: dts: imx7d-pico: Describe the Wifi clock
Fabio Estevam [Fri, 30 Nov 2018 10:31:29 +0000 (08:31 -0200)]
ARM: dts: imx7d-pico: Describe the Wifi clock

The Wifi chip should be clocked by a 32kHz clock coming from i.MX7D
CLKO2 output pin, so describe the pinmux and clock hierarchy in the
device tree to allow the Wifi chip to be properly clocked.

Managed to successfully test Wifi with such change. Used the standard
nvram.txt file provided by TechNexion, which selects an external 32kHz
clock for the Wifi chip by default.

Fixes: 99a52450c707 ("ARM: dts: imx7d-pico: Add Wifi support")
Suggested-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Tested-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
3 years agoMAINTAINERS: Remove myself from the list
Carlo Caione [Sat, 1 Dec 2018 15:17:49 +0000 (15:17 +0000)]
MAINTAINERS: Remove myself from the list

Kevin is basically doing all the work. Remove my name as co-maintainer.

Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
3 years agoMerge tag 'arm-soc/for-4.21/soc' of https://github.com/Broadcom/stblinux into next/soc
Olof Johansson [Mon, 3 Dec 2018 21:09:38 +0000 (13:09 -0800)]
Merge tag 'arm-soc/for-4.21/soc' of https://github.com/Broadcom/stblinux into next/soc

This pull request contains Broadcom ARM-based SoCs machine files updates
for 4.21, please pull the following:

- Stefan switches relevant BCM283x files under arch/arm/mach-bcm to the
  SPDX license identifiers

- Justin adds an entry in the Broadcom STB debug LL stub for 7255

- Florian enables reset controller support for BCM63xx SoCs

* tag 'arm-soc/for-4.21/soc' of https://github.com/Broadcom/stblinux:
  ARM: mach-bcm: Switch bcm2835 and platsmp to SPDX identifier
  ARM: BCM63XX: Enable reset controller support
  ARM: brcmstb: Add entry for 7255

Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoMerge tag 'arm-soc/for-4.20/devicetree-fixes' of https://github.com/Broadcom/stblinux...
Olof Johansson [Mon, 3 Dec 2018 21:05:34 +0000 (13:05 -0800)]
Merge tag 'arm-soc/for-4.20/devicetree-fixes' of https://github.com/Broadcom/stblinux into fixes

This pull request contains Broadcom ARM-based SoCs Device Tree fixes,
please pull the following for 4.20:

- Stefan fixes the polariy of the Wi-Fi reset GPIOs signals which would
  break on Raspberry Pi 3B and 3B+

* tag 'arm-soc/for-4.20/devicetree-fixes' of https://github.com/Broadcom/stblinux:
  ARM: dts: bcm2837: Fix polarity of wifi reset GPIOs

Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoARM: dts: realview: Fix some more duplicate regulator nodes
Rob Herring [Mon, 3 Dec 2018 19:12:48 +0000 (13:12 -0600)]
ARM: dts: realview: Fix some more duplicate regulator nodes

There's a bug in dtc in checking for duplicate node names when there's
another section (e.g. "/ { };"). In this case, skeleton.dtsi provides
another section. Upon removal of skeleton.dtsi, the dtb fails to build
due to a duplicate node 'fixedregulator@0'. As both nodes were pretty
much the same 3.3V fixed regulator, it hasn't really mattered. Fix this
by renaming the nodes to something unique. In the process, drop the
unit-address which shouldn't be present wtihout reg property.

Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoMAINTAINERS: update entry for MMP platform
Lubomir Rintel [Sun, 2 Dec 2018 11:14:28 +0000 (12:14 +0100)]
MAINTAINERS: update entry for MMP platform

Move Eric Miao and Haojian Zhuang over to CREDITS, since they're AWOL
for some time already. The git trees have gone away too.

I'm adding myself as a reviewer. I'd like to be Cc'd on patches and will
be able to test them, but I don't possess a data sheet thus there might
be things I'll be unable to review. Hence the Odd-Fixes status.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoARM: mmp/mmp2: fix cpu_is_mmp2() on mmp2-dt
Lubomir Rintel [Sun, 2 Dec 2018 11:12:24 +0000 (12:12 +0100)]
ARM: mmp/mmp2: fix cpu_is_mmp2() on mmp2-dt

cpu_is_mmp2() was equivalent to cpu_is_pj4(), wouldn't be correct for
multiplatform kernels. Fix it by also considering mmp_chip_id, as is
done for cpu_is_pxa168() and cpu_is_pxa910() above.

Moreover, it is only available with CONFIG_CPU_MMP2 and thus doesn't work
on DT-based MMP2 machines. Enable it on CONFIG_MACH_MMP2_DT too.

Note: CONFIG_CPU_MMP2 is only used for machines that use board files
instead of DT. It should perhaps be renamed. I'm not doing it now, because
I don't have a better idea.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: stable@vger.kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoMerge tag 'v4.19-next-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/matth...
Olof Johansson [Mon, 3 Dec 2018 20:37:41 +0000 (12:37 -0800)]
Merge tag 'v4.19-next-fixes' of https://git./linux/kernel/git/matthias.bgg/linux into fixes

DT mt7622:
- Kernelci awaits a working stdout-path.
  Fix the path for reference board and bananapi-r64
- General propouse timer has issues with clocks that didn't
  get probed early. Delete the DT node as the timer isn't
  need, a ARM arch timer exists on the system.

* tag 'v4.19-next-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
  arm64: dts: mt7622: Drop the general purpose timer node
  arm64: dts: mt7622: fix no more console output on BPI-R64 board
  arm64: dts: mt7622: fix no more console output on rfb1

Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoMAINTAINERS: mediatek: Update SoC entry
Matthias Brugger [Tue, 16 Oct 2018 14:57:58 +0000 (16:57 +0200)]
MAINTAINERS: mediatek: Update SoC entry

Add IRC channel and URL of the wiki.
Also add soc drivers folder and regex to catch more
mediatek components.

Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoARM: dts: bcm2837: Fix polarity of wifi reset GPIOs
Stefan Wahren [Mon, 3 Dec 2018 18:37:08 +0000 (19:37 +0100)]
ARM: dts: bcm2837: Fix polarity of wifi reset GPIOs

The commit b1b8f45b3130 ("ARM: dts: bcm2837: Add missing GPIOs of Expander")
introduced a wifi power sequence. Unfortunately the polarity of the reset
GPIOs were wrong and broke the wifi support on Raspberry Pi 3 B and
later in 3 B+. This wasn't discovered before since the power sequence
takes only effect in case the relevant MMC driver is compiled as a module.

Fixes: b1b8f45b3130 ("ARM: dts: bcm2837: Add missing GPIOs of Expander")
Cc: stable@vger.kernel.org
Reported-by: Matthias Lueschner <lueschem@gmail.com>
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=911443
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
3 years agoARM: sunxi: add Allwinner ARMv5 SoCs
Mesih Kilinc [Sun, 2 Dec 2018 20:23:37 +0000 (23:23 +0300)]
ARM: sunxi: add Allwinner ARMv5 SoCs

Add option for Allwinner ARMv5 SoCs and SoC F1C100s (which has a die
used for many new F-series products, including F1C100A, F1C100s, F1C200s,
F1C500, F1C600).

Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
3 years agodt-bindings: arm: Add new Allwinner ARMv5 F1C100s SoC
Mesih Kilinc [Sun, 2 Dec 2018 20:23:36 +0000 (23:23 +0300)]
dt-bindings: arm: Add new Allwinner ARMv5 F1C100s SoC

Add new Allwinner ARMv5 F1C100s SoC's compatible string

Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
3 years agoARM: Check ARCH_MULTI_V7 to differentiate ARMv5/v7 Allwinner SoCs
Mesih Kilinc [Sun, 2 Dec 2018 20:23:35 +0000 (23:23 +0300)]
ARM: Check ARCH_MULTI_V7 to differentiate ARMv5/v7 Allwinner SoCs

Allwinner also has some ARMv5 SoCs.

In order to add support for them, check ARM_MULTI_V7 before enabling
ARMv7 SoC's. Add help text for ARCH_SUNXI menuconfig.

Signed-off-by: Mesih Kilinc <mesihkilinc@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
3 years agoLinux 4.20-rc5 v4.20-rc5
Linus Torvalds [Sun, 2 Dec 2018 23:07:55 +0000 (15:07 -0800)]
Linux 4.20-rc5

3 years agoMerge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Linus Torvalds [Sun, 2 Dec 2018 20:19:44 +0000 (12:19 -0800)]
Merge tag 'armsoc-fixes' of git://git./linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "Volume is a little higher than usual due to a set of gpio fixes for
  Davinci platforms that's been around a while, still seemed appropriate
  to not hold off until next merge window.

  Besides that it's the usual mix of minor fixes, mostly corrections of
  small stuff in device trees.

  Major stability-related one is the removal of a regulator from DT on
  Rock960, since DVFS caused undervoltage. I expect it'll be restored
  once they figure out the underlying issue"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits)
  MAINTAINERS: Remove unused Qualcomm SoC mailing list
  ARM: davinci: dm644x: set the GPIO base to 0
  ARM: davinci: da830: set the GPIO base to 0
  ARM: davinci: dm355: set the GPIO base to 0
  ARM: davinci: dm646x: set the GPIO base to 0
  ARM: davinci: dm365: set the GPIO base to 0
  ARM: davinci: da850: set the GPIO base to 0
  gpio: davinci: restore a way to manually specify the GPIO base
  ARM: davinci: dm644x: define gpio interrupts as separate resources
  ARM: davinci: dm355: define gpio interrupts as separate resources
  ARM: davinci: dm646x: define gpio interrupts as separate resources
  ARM: davinci: dm365: define gpio interrupts as separate resources
  ARM: davinci: da8xx: define gpio interrupts as separate resources
  ARM: dts: at91: sama5d2: use the divided clock for SMC
  ARM: dts: imx51-zii-rdu1: Remove EEPROM node
  ARM: dts: rockchip: Remove @0 from the veyron memory node
  arm64: dts: rockchip: Fix PCIe reset polarity for rk3399-puma-haikou.
  arm64: dts: qcom: msm8998: Reserve gpio ranges on MTP
  arm64: dts: sdm845-mtp: Reserve reserved gpios
  arm64: dts: ti: k3-am654: Fix wakeup_uart reg address
  ...

3 years agoMerge tag 'for-linus-4.20a-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 2 Dec 2018 20:15:55 +0000 (12:15 -0800)]
Merge tag 'for-linus-4.20a-rc5-tag' of git://git./linux/kernel/git/xen/tip

Pull xen fixes from Juergen Gross:

 - A revert of a previous commit as it is no longer necessary and has
   shown to cause problems in some memory hotplug cases.

 - Some small fixes and a minor cleanup.

 - A patch for adding better diagnostic data in a very rare failure
   case.

* tag 'for-linus-4.20a-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  pvcalls-front: fixes incorrect error handling
  Revert "xen/balloon: Mark unallocated host memory as UNUSABLE"
  xen: xlate_mmu: add missing header to fix 'W=1' warning
  xen/x86: add diagnostic printout to xen_mc_flush() in case of error
  x86/xen: cleanup includes in arch/x86/xen/spinlock.c

3 years agoMerge tag 'dmaengine-fix-4.20-rc5' of git://git.infradead.org/users/vkoul/slave-dma
Linus Torvalds [Sun, 2 Dec 2018 20:07:27 +0000 (12:07 -0800)]
Merge tag 'dmaengine-fix-4.20-rc5' of git://git.infradead.org/users/vkoul/slave-dma

Pull dmaengine fixes from Vinod Koul:
 "This contains two fixes to at_hdmac which fixes long standing bus
  reported recently on serial transfers causing memory leak. These fixes
  were done by Richard Genoud"

* tag 'dmaengine-fix-4.20-rc5' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: at_hdmac: fix module unloading
  dmaengine: at_hdmac: fix memory leak in at_dma_xlate()

3 years agoMerge branch 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sat, 1 Dec 2018 20:35:48 +0000 (12:35 -0800)]
Merge branch 'x86-pti-for-linus' of git://git./linux/kernel/git/tip/tip

Pull STIBP fallout fixes from Thomas Gleixner:
 "The performance destruction department finally got it's act together
  and came up with a cure for the STIPB regression:

   - Provide a command line option to control the spectre v2 user space
     mitigations. Default is either seccomp or prctl (if seccomp is
     disabled in Kconfig). prctl allows mitigation opt-in, seccomp
     enables the migitation for sandboxed processes.

   - Rework the code to handle the conditional STIBP/IBPB control and
     remove the now unused ptrace_may_access_sched() optimization
     attempt

   - Disable STIBP automatically when SMT is disabled

   - Optimize the switch_to() logic to avoid MSR writes and invocations
     of __switch_to_xtra().

   - Make the asynchronous speculation TIF updates synchronous to
     prevent stale mitigation state.

  As a general cleanup this also makes retpoline directly depend on
  compiler support and removes the 'minimal retpoline' option which just
  pretended to provide some form of security while providing none"

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits)
  x86/speculation: Provide IBPB always command line options
  x86/speculation: Add seccomp Spectre v2 user space protection mode
  x86/speculation: Enable prctl mode for spectre_v2_user
  x86/speculation: Add prctl() control for indirect branch speculation
  x86/speculation: Prepare arch_smt_update() for PRCTL mode
  x86/speculation: Prevent stale SPEC_CTRL msr content
  x86/speculation: Split out TIF update
  ptrace: Remove unused ptrace_may_access_sched() and MODE_IBRS
  x86/speculation: Prepare for conditional IBPB in switch_mm()
  x86/speculation: Avoid __switch_to_xtra() calls
  x86/process: Consolidate and simplify switch_to_xtra() code
  x86/speculation: Prepare for per task indirect branch speculation control
  x86/speculation: Add command line control for indirect branch speculation
  x86/speculation: Unify conditional spectre v2 print functions
  x86/speculataion: Mark command line parser data __initdata
  x86/speculation: Mark string arrays const correctly
  x86/speculation: Reorder the spec_v2 code
  x86/l1tf: Show actual SMT state
  x86/speculation: Rework SMT state change
  sched/smt: Expose sched_smt_present static key
  ...

3 years agoMerge tag 'for-linus-20181201' of git://git.kernel.dk/linux-block
Linus Torvalds [Sat, 1 Dec 2018 19:36:32 +0000 (11:36 -0800)]
Merge tag 'for-linus-20181201' of git://git.kernel.dk/linux-block

Pull block layer fixes from Jens Axboe:

 - Single range elevator discard merge fix, that caused crashes (Ming)

 - Fix for a regression in O_DIRECT, where we could potentially lose the
   error value (Maximilian Heyne)

 - NVMe pull request from Christoph, with little fixes all over the map
   for NVMe.

* tag 'for-linus-20181201' of git://git.kernel.dk/linux-block:
  block: fix single range discard merge
  nvme-rdma: fix double freeing of async event data
  nvme: flush namespace scanning work just before removing namespaces
  nvme: warn when finding multi-port subsystems without multipathing enabled
  fs: fix lost error code in dio_complete
  nvme-pci: fix surprise removal
  nvme-fc: initialize nvme_req(rq)->ctrl after calling __nvme_fc_init_request()
  nvme: Free ctrl device name on init failure

3 years agoMerge tag 'pci-v4.20-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaa...
Linus Torvalds [Sat, 1 Dec 2018 19:32:49 +0000 (11:32 -0800)]
Merge tag 'pci-v4.20-fixes-2' of git://git./linux/kernel/git/helgaas/pci

Pull PCI fixes from Bjorn Helgaas:

 - Fix a link speed checking interface that broke PCIe gen3 cards in
   gen1 slots (Mikulas Patocka)

 - Fix an imx6 link training error (Trent Piepho)

 - Fix a layerscape outbound window accessor calling error (Hou
   Zhiqiang)

 - Fix a DesignWare endpoint MSI-X address calculation error (Gustavo
   Pimentel)

* tag 'pci-v4.20-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: Fix incorrect value returned from pcie_get_speed_cap()
  PCI: dwc: Fix MSI-X EP framework address calculation bug
  PCI: layerscape: Fix wrong invocation of outbound window disable accessor
  PCI: imx6: Fix link training status detection in link up check

3 years agoMerge remote-tracking branch 'lorenzo/pci/controller-fixes' into for-linus
Bjorn Helgaas [Sat, 1 Dec 2018 05:42:08 +0000 (23:42 -0600)]
Merge remote-tracking branch 'lorenzo/pci/controller-fixes' into for-linus

  - Fix DesignWare endpoint MSI-X address calculation bug (Gustavo
    Pimentel)

  - Fix Layerscape outbound window disable usage (Hou Zhiqiang)

  - Fix imx6 link up detection (Trent Piepho)

* lorenzo/pci/controller-fixes:
  PCI: dwc: Fix MSI-X EP framework address calculation bug
  PCI: layerscape: Fix wrong invocation of outbound window disable accessor
  PCI: imx6: Fix link training status detection in link up check

3 years agoPCI: Fix incorrect value returned from pcie_get_speed_cap()
Mikulas Patocka [Mon, 26 Nov 2018 16:37:13 +0000 (10:37 -0600)]
PCI: Fix incorrect value returned from pcie_get_speed_cap()

The macros PCI_EXP_LNKCAP_SLS_*GB are values, not bit masks.  We must mask
the register and compare it against them.

This fixes errors like this:

  amdgpu: [powerplay] failed to send message 261 ret is 0

when a PCIe-v3 card is plugged into a PCIe-v1 slot, because the slot is
being incorrectly reported as PCIe-v3 capable.

6cf57be0f78e, which appeared in v4.17, added pcie_get_speed_cap() with the
incorrect test of PCI_EXP_LNKCAP_SLS as a bitmask.  5d9a63304032, which
appeared in v4.19, changed amdgpu to use pcie_get_speed_cap(), so the
amdgpu bug reports below are regressions in v4.19.

Fixes: 6cf57be0f78e ("PCI: Add pcie_get_speed_cap() to find max supported link speed")
Fixes: 5d9a63304032 ("drm/amdgpu: use pcie functions for link width and speed")
Link: https://bugs.freedesktop.org/show_bug.cgi?id=108704
Link: https://bugs.freedesktop.org/show_bug.cgi?id=108778
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
[bhelgaas: update comment, remove use of PCI_EXP_LNKCAP_SLS_8_0GB and
PCI_EXP_LNKCAP_SLS_16_0GB since those should be covered by PCI_EXP_LNKCAP2,
remove test of PCI_EXP_LNKCAP for zero, since that register is required]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # v4.17+
3 years agoMerge branch 'akpm' (patches from Andrew)
Linus Torvalds [Sat, 1 Dec 2018 02:45:49 +0000 (18:45 -0800)]
Merge branch 'akpm' (patches from Andrew)

Merge misc fixes from Andrew Morton:
 "31 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (31 commits)
  ocfs2: fix potential use after free
  mm/khugepaged: fix the xas_create_range() error path
  mm/khugepaged: collapse_shmem() do not crash on Compound
  mm/khugepaged: collapse_shmem() without freezing new_page
  mm/khugepaged: minor reorderings in collapse_shmem()
  mm/khugepaged: collapse_shmem() remember to clear holes
  mm/khugepaged: fix crashes due to misaccounted holes
  mm/khugepaged: collapse_shmem() stop if punched or truncated
  mm/huge_memory: fix lockdep complaint on 32-bit i_size_read()
  mm/huge_memory: splitting set mapping+index before unfreeze
  mm/huge_memory: rename freeze_page() to unmap_page()
  initramfs: clean old path before creating a hardlink
  kernel/kcov.c: mark funcs in __sanitizer_cov_trace_pc() as notrace
  psi: make disabling/enabling easier for vendor kernels
  proc: fixup map_files test on arm
  debugobjects: avoid recursive calls with kmemleak
  userfaultfd: shmem: UFFDIO_COPY: set the page dirty if VM_WRITE is not set
  userfaultfd: shmem: add i_size checks
  userfaultfd: shmem/hugetlbfs: only allow to register VM_MAYWRITE vmas
  userfaultfd: shmem: allocate anonymous memory for MAP_PRIVATE shmem
  ...

3 years agoMerge tag 'mips_fixes_4.20_4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips...
Linus Torvalds [Sat, 1 Dec 2018 02:41:06 +0000 (18:41 -0800)]
Merge tag 'mips_fixes_4.20_4' of git://git./linux/kernel/git/mips/linux

Pull few more MIPS fixes from Paul Burton:

 - Fix mips_get_syscall_arg() to operate on the task specified when
   detecting o32 tasks running on MIPS64 kernels.

 - Fix some incorrect GPIO pin muxing for the MT7620 SoC.

 - Update the linux-mips mailing list address.

* tag 'mips_fixes_4.20_4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MAINTAINERS: Update linux-mips mailing list address
  MIPS: ralink: Fix mt7620 nd_sd pinmux
  mips: fix mips_get_syscall_arg o32 check

3 years agoMerge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Linus Torvalds [Sat, 1 Dec 2018 02:39:07 +0000 (18:39 -0800)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull arm64 fixes from Catalin Marinas:

 - Cortex-A76 erratum workaround

 - ftrace fix to enable syscall events on arm64

 - Fix uninitialised pointer in iort_get_platform_device_domain()

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  ACPI/IORT: Fix iort_get_platform_device_domain() uninitialized pointer value
  arm64: ftrace: Fix to enable syscall events on arm64
  arm64: Add workaround for Cortex-A76 erratum 1286807

3 years agoMerge tag 'gcc-plugins-v4.20-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sat, 1 Dec 2018 02:36:30 +0000 (18:36 -0800)]
Merge tag 'gcc-plugins-v4.20-rc5' of git://git./linux/kernel/git/kees/linux

Pull stackleak plugin fix from Kees Cook:
 "Fix crash by not allowing kprobing of stackleak_erase() (Alexander
  Popov)"

* tag 'gcc-plugins-v4.20-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  stackleak: Disable function tracing and kprobes for stackleak_erase()

3 years agoMerge tag 'fscache-fixes-20181130' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sat, 1 Dec 2018 02:32:33 +0000 (18:32 -0800)]
Merge tag 'fscache-fixes-20181130' of git://git./linux/kernel/git/dhowells/linux-fs

Pull fscache and cachefiles fixes from David Howells:
 "Misc fixes:

   - Fix an assertion failure at fs/cachefiles/xattr.c:138 caused by a
     race between a cache object lookup failing and someone attempting
     to reenable that object, thereby triggering an update of the
     object's attributes.

   - Fix an assertion failure at fs/fscache/operation.c:449 caused by a
     split atomic subtract and atomic read that allows a race to happen.

   - Fix a leak of backing pages when simultaneously reading the same
     page from the same object from two or more threads.

   - Fix a hang due to a race between a cache object being discarded and
     the corresponding cookie being reenabled.

  There are also some minor cleanups:

   - Cast an enum value to a different enum type to prevent clang from
     generating a warning. This shouldn't cause any sort of change in
     the emitted code.

   - Use ktime_get_real_seconds() instead of get_seconds(). This is just
     used to uniquify a filename for an object to be placed in the
     graveyard. Objects placed there are deleted by cachfilesd in
     userspace immediately thereafter.

   - Remove an initialised, but otherwise unused variable. This should
     have been entirely optimised away anyway"

* tag 'fscache-fixes-20181130' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  fscache, cachefiles: remove redundant variable 'cache'
  cachefiles: avoid deprecated get_seconds()
  cachefiles: Explicitly cast enumerated type in put_object
  fscache: fix race between enablement and dropping of object
  cachefiles: Fix page leak in cachefiles_read_backing_file while vmscan is active
  fscache: Fix race in fscache_op_complete() due to split atomic_sub & read
  cachefiles: Fix an assertion failure when trying to update a failed object

3 years agoMerge tag 'omap-for-v4.21/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel...
Olof Johansson [Fri, 30 Nov 2018 23:50:54 +0000 (15:50 -0800)]
Merge tag 'omap-for-v4.21/soc-signed' of git://git./linux/kernel/git/tmlind/linux-omap into next/soc

SoC changes for omaps for v4.21 merge window

Few more non-critical section annotation fixes for Clang and
remove obsolete timer header inclusion.

* tag 'omap-for-v4.21/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2+: timer: Remove obsolete inclusion of <asm/smp_twd.h>
  ARM: OMAP2+: prm44xx: Fix section annotation on omap44xx_prm_enable_io_wakeup
  ARM: OMAP2+: hwmod: Fix some section annotations

Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoARM: mmp: add an instance of pxa-usb-phy to ttc_dkb and aspenite
Lubomir Rintel [Wed, 28 Nov 2018 17:53:22 +0000 (18:53 +0100)]
ARM: mmp: add an instance of pxa-usb-phy to ttc_dkb and aspenite

This will replace the *_pdata.phy_{de,}init()

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoARM: mmp: add a pxa-usb-phy device
Lubomir Rintel [Wed, 28 Nov 2018 17:53:21 +0000 (18:53 +0100)]
ARM: mmp: add a pxa-usb-phy device

This is to replace the USB PHY initialization code (pxa_usb_phy_init(),
pxa_usb_phy_deinit()) with a proper PHY driver.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoARM: mmp/mmp2: dt: enable the clock
Lubomir Rintel [Wed, 28 Nov 2018 17:53:20 +0000 (18:53 +0100)]
ARM: mmp/mmp2: dt: enable the clock

The device-tree booted MMP2 needs to enable the timer clock, otherwise
it would stop ticking when the boot finishes.

It can also use the clock rate from the clk, the non-DT boards need to
keep using the hardcoded rates.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoARM: mmp2: initialize clocks before the timer
Lubomir Rintel [Wed, 28 Nov 2018 17:53:19 +0000 (18:53 +0100)]
ARM: mmp2: initialize clocks before the timer

The timer shall enable its clock.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoMerge tag 'socfpga_updates_for_v5.0' of git://git.kernel.org/pub/scm/linux/kernel...
Olof Johansson [Fri, 30 Nov 2018 23:39:13 +0000 (15:39 -0800)]
Merge tag 'socfpga_updates_for_v5.0' of git://git./linux/kernel/git/dinguyen/linux into next/soc

SoCFPGA updates for v5.0
- Split Kconfig options for debug UART on Cyclone5
- Remove unused functions from socfpga platform code
- Turn on ARM and PL310 errata for SOCFPGA ARMv7 platform

* tag 'socfpga_updates_for_v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
  ARM: socfpga: Turn on ARM errata for L2 cache
  ARM: socfpga: Clean unused functions
  ARM: debug: enable UART1 for socfpga Cyclone5

Signed-off-by: Olof Johansson <olof@lixom.net>
3 years agoMAINTAINERS: Update linux-mips mailing list address
Paul Burton [Fri, 30 Nov 2018 19:57:22 +0000 (11:57 -0800)]
MAINTAINERS: Update linux-mips mailing list address

The linux-mips.org infrastructure has been unreliable recently & nobody
with sufficient access to fix it is around to do so. As a result we're
moving away from it, and part of this is migrating our mailing list to
kernel.org.

Replace all instances of linux-mips@linux-mips.org in MAINTAINERS with
the shiny new linux-mips@vger.kernel.org address.

The new list is now being archived on kernel.org at
https://lore.kernel.org/linux-mips/ which also holds the history of the
old linux-mips.org list.

Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: linux-mips@linux-mips.org
3 years agoocfs2: fix potential use after free
Pan Bian [Fri, 30 Nov 2018 22:10:54 +0000 (14:10 -0800)]
ocfs2: fix potential use after free

ocfs2_get_dentry() calls iput(inode) to drop the reference count of
inode, and if the reference count hits 0, inode is freed.  However, in
this function, it then reads inode->i_generation, which may result in a
use after free bug.  Move the put operation later.

Link: http://lkml.kernel.org/r/1543109237-110227-1-git-send-email-bianpan2016@163.com
Fixes: 781f200cb7a("ocfs2: Remove masklog ML_EXPORT.")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <ge.changwei@h3c.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
3 years agomm/khugepaged: fix the xas_create_range() error path
Hugh Dickins [Fri, 30 Nov 2018 22:10:50 +0000 (14:10 -0800)]
mm/khugepaged: fix the xas_create_range() error path

collapse_shmem()'s xas_nomem() is very unlikely to fail, but it is
rightly given a failure path, so move the whole xas_create_range() block
up before __SetPageLocked(new_page): so that it does not need to
remember to unlock_page(new_page).

Add the missing mem_cgroup_cancel_charge(), and set (currently unused)
result to SCAN_FAIL rather than SCAN_SUCCEED.

Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261531200.2275@eggly.anvils
Fixes: 77da9389b9d5 ("mm: Convert collapse_shmem to XArray")
Signed-off-by: Hugh Dickins <hughd@kernel.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
3 years agomm/khugepaged: collapse_shmem() do not crash on Compound
Hugh Dickins [Fri, 30 Nov 2018 22:10:47 +0000 (14:10 -0800)]
mm/khugepaged: collapse_shmem() do not crash on Compound

collapse_shmem()'s VM_BUG_ON_PAGE(PageTransCompound) was unsafe: before
it holds page lock of the first page, racing truncation then extension
might conceivably have inserted a hugepage there already.  Fail with the
SCAN_PAGE_COMPOUND result, instead of crashing (CONFIG_DEBUG_VM=y) or
otherwise mishandling the unexpected hugepage - though later we might
code up a more constructive way of handling it, with SCAN_SUCCESS.

Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261529310.2275@eggly.anvils
Fixes: f3f0e1d2150b2 ("khugepaged: add support of collapse for tmpfs/shmem pages")
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org> [4.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
3 years agomm/khugepaged: collapse_shmem() without freezing new_page
Hugh Dickins [Fri, 30 Nov 2018 22:10:43 +0000 (14:10 -0800)]
mm/khugepaged: collapse_shmem() without freezing new_page

khugepaged's collapse_shmem() does almost all of its work, to assemble
the huge new_page from 512 scattered old pages, with the new_page's
refcount frozen to 0 (and refcounts of all old pages so far also frozen
to 0).  Including shmem_getpage() to read in any which were out on swap,
memory reclaim if necessary to allocate their intermediate pages, and
copying over all the data from old to new.

Imagine the frozen refcount as a spinlock held, but without any lock
debugging to highlight the abuse: it's not good, and under serious load
heads into lockups - speculative getters of the page are not expecting
to spin while khugepaged is rescheduled.

One can get a little further under load by hacking around elsewhere; but
fortunately, freezing the new_page turns out to have been entirely
unnecessary, with no hacks needed elsewhere.

The huge new_page lock is already held throughout, and guards all its
subpages as they are brought one by one into the page cache tree; and
anything reading the data in that page, without the lock, before it has
been marked PageUptodate, would already be in the wrong.  So simply
eliminate the freezing of the new_page.

Each of the old pages remains frozen with refcount 0 after it has been
replaced by a new_page subpage in the page cache tree, until they are
all unfrozen on success or failure: just as before.  They could be
unfrozen sooner, but cause no problem once no longer visible to
find_get_entry(), filemap_map_pages() and other speculative lookups.

Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261527570.2275@eggly.anvils
Fixes: f3f0e1d2150b2 ("khugepaged: add support of collapse for tmpfs/shmem pages")
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org> [4.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
3 years agomm/khugepaged: minor reorderings in collapse_shmem()
Hugh Dickins [Fri, 30 Nov 2018 22:10:39 +0000 (14:10 -0800)]
mm/khugepaged: minor reorderings in collapse_shmem()

Several cleanups in collapse_shmem(): most of which probably do not
really matter, beyond doing things in a more familiar and reassuring
order.  Simplify the failure gotos in the main loop, and on success
update stats while interrupts still disabled from the last iteration.

Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261526400.2275@eggly.anvils
Fixes: f3f0e1d2150b2 ("khugepaged: add support of collapse for tmpfs/shmem pages")
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org> [4.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
3 years agomm/khugepaged: collapse_shmem() remember to clear holes
Hugh Dickins [Fri, 30 Nov 2018 22:10:35 +0000 (14:10 -0800)]
mm/khugepaged: collapse_shmem() remember to clear holes

Huge tmpfs testing reminds us that there is no __GFP_ZERO in the gfp
flags khugepaged uses to allocate a huge page - in all common cases it
would just be a waste of effort - so collapse_shmem() must remember to
clear out any holes that it instantiates.

The obvious place to do so, where they are put into the page cache tree,
is not a good choice: because interrupts are disabled there.  Leave it
until further down, once success is assured, where the other pages are
copied (before setting PageUptodate).

Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261525080.2275@eggly.anvils
Fixes: f3f0e1d2150b2 ("khugepaged: add support of collapse for tmpfs/shmem pages")
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org> [4.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
3 years agomm/khugepaged: fix crashes due to misaccounted holes
Hugh Dickins [Fri, 30 Nov 2018 22:10:29 +0000 (14:10 -0800)]
mm/khugepaged: fix crashes due to misaccounted holes

Huge tmpfs testing on a shortish file mapped into a pmd-rounded extent
hit shmem_evict_inode()'s WARN_ON(inode->i_blocks) followed by
clear_inode()'s BUG_ON(inode->i_data.nrpages) when the file was later
closed and unlinked.

khugepaged's collapse_shmem() was forgetting to update mapping->nrpages
on the rollback path, after it had added but then needs to undo some
holes.

There is indeed an irritating asymmetry between shmem_charge(), whose
callers want it to increment nrpages after successfully accounting
blocks, and shmem_uncharge(), when __delete_from_page_cache() already
decremented nrpages itself: oh well, just add a comment on that to them
both.

And shmem_recalc_inode() is supposed to be called when the accounting is
expected to be in balance (so it can deduce from imbalance that reclaim
discarded some pages): so change shmem_charge() to update nrpages
earlier (though it's rare for the difference to matter at all).

Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261523450.2275@eggly.anvils
Fixes: 800d8c63b2e98 ("shmem: add huge pages support")
Fixes: f3f0e1d2150b2 ("khugepaged: add support of collapse for tmpfs/shmem pages")
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org> [4.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
3 years agomm/khugepaged: collapse_shmem() stop if punched or truncated
Hugh Dickins [Fri, 30 Nov 2018 22:10:25 +0000 (14:10 -0800)]
mm/khugepaged: collapse_shmem() stop if punched or truncated

Huge tmpfs testing showed that although collapse_shmem() recognizes a
concurrently truncated or hole-punched page correctly, its handling of
holes was liable to refill an emptied extent.  Add check to stop that.

Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261522040.2275@eggly.anvils
Fixes: f3f0e1d2150b2 ("khugepaged: add support of collapse for tmpfs/shmem pages")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Matthew Wilcox <willy@infradead.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: <stable@vger.kernel.org> [4.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
3 years agomm/huge_memory: fix lockdep complaint on 32-bit i_size_read()
Hugh Dickins [Fri, 30 Nov 2018 22:10:21 +0000 (14:10 -0800)]
mm/huge_memory: fix lockdep complaint on 32-bit i_size_read()

Huge tmpfs testing, on 32-bit kernel with lockdep enabled, showed that
__split_huge_page() was using i_size_read() while holding the irq-safe
lru_lock and page tree lock, but the 32-bit i_size_read() uses an
irq-unsafe seqlock which should not be nested inside them.

Instead, read the i_size earlier in split_huge_page_to_list(), and pass
the end offset down to __split_huge_page(): all while holding head page
lock, which is enough to prevent truncation of that extent before the
page tree lock has been taken.

Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261520070.2275@eggly.anvils
Fixes: baa355fd33142 ("thp: file pages support for split_huge_page()")
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org> [4.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
3 years agomm/huge_memory: splitting set mapping+index before unfreeze
Hugh Dickins [Fri, 30 Nov 2018 22:10:16 +0000 (14:10 -0800)]
mm/huge_memory: splitting set mapping+index before unfreeze

Huge tmpfs stress testing has occasionally hit shmem_undo_range()'s
VM_BUG_ON_PAGE(page_to_pgoff(page) != index, page).

Move the setting of mapping and index up before the page_ref_unfreeze()
in __split_huge_page_tail() to fix this: so that a page cache lookup
cannot get a reference while the tail's mapping and index are unstable.

In fact, might as well move them up before the smp_wmb(): I don't see an
actual need for that, but if I'm missing something, this way round is
safer than the other, and no less efficient.

You might argue that VM_BUG_ON_PAGE(page_to_pgoff(page) != index, page) is
misplaced, and should be left until after the trylock_page(); but left as
is has not crashed since, and gives more stringent assurance.

Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261516380.2275@eggly.anvils
Fixes: e9b61f19858a5 ("thp: reintroduce split_huge_page()")
Requires: 605ca5ede764 ("mm/huge_memory.c: reorder operations in __split_huge_page_tail()")
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org> [4.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
3 years agomm/huge_memory: rename freeze_page() to unmap_page()
Hugh Dickins [Fri, 30 Nov 2018 22:10:13 +0000 (14:10 -0800)]
mm/huge_memory: rename freeze_page() to unmap_page()

The term "freeze" is used in several ways in the kernel, and in mm it
has the particular meaning of forcing page refcount temporarily to 0.
freeze_page() is just too confusing a name for a function that unmaps a
page: rename it unmap_page(), and rename unfreeze_page() remap_page().

Went to change the mention of freeze_page() added later in mm/rmap.c,
but found it to be incorrect: ordinary page reclaim reaches there too;
but the substance of the comment still seems correct, so edit it down.

Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261514080.2275@eggly.anvils
Fixes: e9b61f19858a5 ("thp: reintroduce split_huge_page()")
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org> [4.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
3 years agoinitramfs: clean old path before creating a hardlink
Li Zhijian [Fri, 30 Nov 2018 22:10:09 +0000 (14:10 -0800)]
initramfs: clean old path before creating a hardlink

sys_link() can fail due to the new path already existing.  This case
ofen occurs when we use a concated initrd, for example:

1) prepare a basic rootfs, it contains a regular files rc.local
lizhijian@:~/yocto-tiny-i386-2016-04-22$ cat etc/rc.local
 #!/bin/sh
 echo "Running /etc/rc.local..."
yocto-tiny-i386-2016-04-22$ find . | sed 's,^\./,,' | cpio -o -H newc | gzip -n -9 >../rootfs.cgz

2) create a extra initrd which also includes a etc/rc.local
lizhijian@:~/lkp-x86_64/etc$ echo "append initrd" >rc.local
lizhijian@:~/lkp/lkp-x86_64/etc$ cat rc.local
append initrd
lizhijian@:~/lkp/lkp-x86_64/etc$ ln rc.local rc.local.hardlink
append initrd
lizhijian@:~/lkp/lkp-x86_64/etc$ stat rc.local rc.local.hardlink
  File: 'rc.local'
  Size: 14         Blocks: 8          IO Block: 4096   regular file
Device: 801h/2049d Inode: 11296086    Links: 2
Access: (0664/-rw-rw-r--)  Uid: ( 1002/lizhijian)   Gid: ( 1002/lizhijian)
Access: 2018-11-15 16:08:28.654464815 +0800
Modify: 2018-11-15 16:07:57.514903210 +0800
Change: 2018-11-15 16:08:24.180228872 +0800
 Birth: -
  File: 'rc.local.hardlink'
  Size: 14         Blocks: 8          IO Block: 4096   regular file
Device: 801h/2049d Inode: 11296086    Links: 2
Access: (0664/-rw-rw-r--)  Uid: ( 1002/lizhijian)   Gid: ( 1002/lizhijian)
Access: 2018-11-15 16:08:28.654464815 +0800
Modify: 2018-11-15 16:07:57.514903210 +0800
Change: 2018-11-15 16:08:24.180228872 +0800
 Birth: -

lizhijian@:~/lkp/lkp-x86_64$ find . | sed 's,^\./,,' | cpio -o -H newc | gzip -n -9 >../rc-local.cgz
lizhijian@:~/lkp/lkp-x86_64$ gzip -dc ../rc-local.cgz | cpio -t
.
etc
etc/rc.local.hardlink <<< it will be extracted first at this initrd
etc/rc.local

3) concate 2 initrds and boot
lizhijian@:~/lkp$ cat rootfs.cgz rc-local.cgz >concate-initrd.cgz
lizhijian@:~/lkp$ qemu-system-x86_64 -nographic -enable-kvm -cpu host -smp 1 -m 1024 -kernel ~/lkp/linux/arch/x86/boot/bzImage -append "console=ttyS0 earlyprint=ttyS0 ignore_loglevel" -initrd ./concate-initr.cgz -serial stdio -nodefaults

In this case, sys_link(2) will fail and return -EEXIST, so we can only get
the rc.local at rootfs.cgz instead of rc-local.cgz

[akpm@linux-foundation.org: move code to avoid forward declaration]
Link: http://lkml.kernel.org/r/1542352368-13299-1-git-send-email-lizhijian@cn.fujitsu.com
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Cc: Philip Li <philip.li@intel.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Li Zhijian <zhijianx.li@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
3 years agokernel/kcov.c: mark funcs in __sanitizer_cov_trace_pc() as notrace
Anders Roxell [Fri, 30 Nov 2018 22:10:05 +0000 (14:10 -0800)]
kernel/kcov.c: mark funcs in __sanitizer_cov_trace_pc() as notrace

Since __sanitizer_cov_trace_pc() is marked as notrace, function calls in
__sanitizer_cov_trace_pc() shouldn't be traced either.
ftrace_graph_caller() gets called for each function that isn't marked
'notrace', like canonicalize_ip().  This is the call trace from a run:

[  139.644550]  ftrace_graph_caller+0x1c/0x24
[  139.648352]  canonicalize_ip+0x18/0x28
[  139.652313]  __sanitizer_cov_trace_pc+0x14/0x58
[  139.656184]  sched_clock+0x34/0x1e8
[  139.659759]  trace_clock_local+0x40/0x88
[  139.663722]  ftrace_push_return_trace+0x8c/0x1f0
[  139.667767]  prepare_ftrace_return+0xa8/0x100
[  139.671709]  ftrace_graph_caller+0x1c/0x24

Rework so that check_kcov_mode() and canonicalize_ip() that are called
from __sanitizer_cov_trace_pc() are also marked as notrace.

Link: http://lkml.kernel.org/r/20181128081239.18317-1-anders.roxell@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signen-off-by: Anders Roxell <anders.roxell@linaro.org>
Co-developed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
3 years agopsi: make disabling/enabling easier for vendor kernels
Johannes Weiner [Fri, 30 Nov 2018 22:09:58 +0000 (14:09 -0800)]
psi: make disabling/enabling easier for vendor kernels

Mel Gorman reports a hackbench regression with psi that would prohibit
shipping the suse kernel with it default-enabled, but he'd still like
users to be able to opt in at little to no cost to others.

With the current combination of CONFIG_PSI and the psi_disabled bool set
from the commandline, this is a challenge.  Do the following things to
make it easier:

1. Add a config option CONFIG_PSI_DEFAULT_DISABLED that allows distros
   to enable CONFIG_PSI in their kernel but leave the feature disabled
   unless a user requests it at boot-time.

   To avoid double negatives, rename psi_disabled= to psi=.

2. Make psi_disabled a static branch to eliminate any branch costs
   when the feature is disabled.

In terms of numbers before and after this patch, Mel says:

: The following is a comparision using CONFIG_PSI=n as a baseline against
: your patch and a vanilla kernel
:
:                          4.20.0-rc4             4.20.0-rc4             4.20.0-rc4
:                 kconfigdisable-v1r1                vanilla        psidisable-v1r1
: Amean     1       1.3100 (   0.00%)      1.3923 (  -6.28%)      1.3427 (  -2.49%)
: Amean     3       3.8860 (   0.00%)      4.1230 *  -6.10%*      3.8860 (  -0.00%)
: Amean     5       6.8847 (   0.00%)      8.0390 * -16.77%*      6.7727 (   1.63%)
: Amean     7       9.9310 (   0.00%)     10.8367 *  -9.12%*      9.9910 (  -0.60%)
: Amean     12     16.6577 (   0.00%)     18.2363 *  -9.48%*     17.1083 (  -2.71%)
: Amean     18     26.5133 (   0.00%)     27.8833 *  -5.17%*     25.7663 (   2.82%)
: Amean     24     34.3003 (   0.00%)     34.6830 (  -1.12%)     32.0450 (   6.58%)
: Amean     30     40.0063 (   0.00%)     40.5800 (  -1.43%)     41.5087 (  -3.76%)
: Amean     32     40.1407 (   0.00%)     41.2273 (  -2.71%)     39.9417 (   0.50%)
:
: It's showing that the vanilla kernel takes a hit (as the bisection
: indicated it would) and that disabling PSI by default is reasonably
: close in terms of performance for this particular workload on this
: particular machine so;

Link: http://lkml.kernel.org/r/20181127165329.GA29728@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Tested-by: Mel Gorman <mgorman@techsingularity.net>
Reported-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
3 years agoproc: fixup map_files test on arm
Alexey Dobriyan [Fri, 30 Nov 2018 22:09:53 +0000 (14:09 -0800)]
proc: fixup map_files test on arm

https://bugs.linaro.org/show_bug.cgi?id=3782

Turns out arm doesn't permit mapping address 0, so try minimum virtual
address instead.

Link: http://lkml.kernel.org/r/20181113165446.GA28157@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reported-by: Rafael David Tinoco <rafael.tinoco@linaro.org>
Tested-by: Rafael David Tinoco <rafael.tinoco@linaro.org>
Acked-by: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
3 years agodebugobjects: avoid recursive calls with kmemleak
Qian Cai [Fri, 30 Nov 2018 22:09:48 +0000 (14:09 -0800)]
debugobjects: avoid recursive calls with kmemleak

CONFIG_DEBUG_OBJECTS_RCU_HEAD does not play well with kmemleak due to
recursive calls.

fill_pool
  kmemleak_ignore
    make_black_object
      put_object
        __call_rcu (kernel/rcu/tree.c)
          debug_rcu_head_queue
            debug_object_activate
              debug_object_init
                fill_pool
                  kmemleak_ignore
                    make_black_object
                      ...

So add SLAB_NOLEAKTRACE to kmem_cache_create() to not register newly
allocated debug objects at all.

Link: http://lkml.kernel.org/r/20181126165343.2339-1-cai@gmx.us
Signed-off-by: Qian Cai <cai@gmx.us>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Waiman Long <longman@redhat.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yang Shi <yang.shi@linux.alibaba.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
3 years agouserfaultfd: shmem: UFFDIO_COPY: set the page dirty if VM_WRITE is not set
Andrea Arcangeli [Fri, 30 Nov 2018 22:09:43 +0000 (14:09 -0800)]
userfaultfd: shmem: UFFDIO_COPY: set the page dirty if VM_WRITE is not set

Set the page dirty if VM_WRITE is not set because in such case the pte
won't be marked dirty and the page would be reclaimed without writepage
(i.e.  swapout in the shmem case).

This was found by source review.  Most apps (certainly including QEMU)
only use UFFDIO_COPY on PROT_READ|PROT_WRITE mappings or the app can't
modify the memory in the first place.  This is for correctness and it
could help the non cooperative use case to avoid unexpected data loss.

Link: http://lkml.kernel.org/r/20181126173452.26955-6-aarcange@redhat.com
Reviewed-by: Hugh Dickins <hughd@google.com>
Cc: stable@vger.kernel.org
Fixes: 4c27fe4c4c84 ("userfaultfd: shmem: add shmem_mcopy_atomic_pte for userfaultfd support")
Reported-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
3 years agouserfaultfd: shmem: add i_size checks
Andrea Arcangeli [Fri, 30 Nov 2018 22:09:37 +0000 (14:09 -0800)]
userfaultfd: shmem: add i_size checks

With MAP_SHARED: recheck the i_size after taking the PT lock, to
serialize against truncate with the PT lock.  Delete the page from the
pagecache if the i_size_read check fails.

With MAP_PRIVATE: check the i_size after the PT lock before mapping
anonymous memory or zeropages into the MAP_PRIVATE shmem mapping.

A mostly irrelevant cleanup: like we do the delete_from_page_cache()
pagecache removal after dropping the PT lock, the PT lock is a spinlock
so drop it before the sleepable page lock.

Link: http://lkml.kernel.org/r/20181126173452.26955-5-aarcange@redhat.com
Fixes: 4c27fe4c4c84 ("userfaultfd: shmem: add shmem_mcopy_atomic_pte for userfaultfd support")
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Hugh Dickins <hughd@google.com>
Reported-by: Jann Horn <jannh@google.com>
Cc: <stable@vger.kernel.org>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
3 years agouserfaultfd: shmem/hugetlbfs: only allow to register VM_MAYWRITE vmas
Andrea Arcangeli [Fri, 30 Nov 2018 22:09:32 +0000 (14:09 -0800)]
userfaultfd: shmem/hugetlbfs: only allow to register VM_MAYWRITE vmas

After the VMA to register the uffd onto is found, check that it has
VM_MAYWRITE set before allowing registration.  This way we inherit all
common code checks before allowing to fill file holes in shmem and
hugetlbfs with UFFDIO_COPY.

The userfaultfd memory model is not applicable for readonly files unless
it's a MAP_PRIVATE.

Link: http://lkml.kernel.org/r/20181126173452.26955-4-aarcange@redhat.com
Fixes: ff62a3421044 ("hugetlb: implement memfd sealing")
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Hugh Dickins <hughd@google.com>
Reported-by: Jann Horn <jannh@google.com>
Fixes: 4c27fe4c4c84 ("userfaultfd: shmem: add shmem_mcopy_atomic_pte for userfaultfd support")
Cc: <stable@vger.kernel.org>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
3 years agouserfaultfd: shmem: allocate anonymous memory for MAP_PRIVATE shmem
Andrea Arcangeli [Fri, 30 Nov 2018 22:09:28 +0000 (14:09 -0800)]
userfaultfd: shmem: allocate anonymous memory for MAP_PRIVATE shmem

Userfaultfd did not create private memory when UFFDIO_COPY was invoked
on a MAP_PRIVATE shmem mapping.  Instead it wrote to the shmem file,
even when that had not been opened for writing.  Though, fortunately,
that could only happen where there was a hole in the file.

Fix the shmem-backed implementation of UFFDIO_COPY to create private
memory for MAP_PRIVATE mappings.  The hugetlbfs-backed implementation
was already correct.

This change is visible to userland, if userfaultfd has been used in
unintended ways: so it introduces a small risk of incompatibility, but
is necessary in order to respect file permissions.

An app that uses UFFDIO_COPY for anything like postcopy live migration
won't notice the difference, and in fact it'll run faster because there
will be no copy-on-write and memory waste in the tmpfs pagecache
anymore.

Userfaults on MAP_PRIVATE shmem keep triggering only on file holes like
before.

The real zeropage can also be built on a MAP_PRIVATE shmem mapping
through UFFDIO_ZEROPAGE and that's safe because the zeropage pte is
never dirty, in turn even an mprotect upgrading the vma permission from
PROT_READ to PROT_READ|PROT_WRITE won't make the zeropage pte writable.

Link: http://lkml.kernel.org/r/20181126173452.26955-3-aarcange@redhat.com
Fixes: 4c27fe4c4c84 ("userfaultfd: shmem: add shmem_mcopy_atomic_pte for userfaultfd support")
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reported-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>