muen/linux.git
3 years agoMerge tag 'xtensa-20180914' of git://github.com/jcmvbkbc/linux-xtensa
Linus Torvalds [Fri, 14 Sep 2018 22:56:42 +0000 (12:56 -1000)]
Merge tag 'xtensa-20180914' of git://github.com/jcmvbkbc/linux-xtensa

Pull Xtensa fixes and cleanups from Max Filippov:

 - don't allocate memory in platform_setup as the memory allocator is
   not initialized at that point yet;

 - remove unnecessary ifeq KBUILD_SRC from arch/xtensa/Makefile;

 - enable SG chaining in arch/xtensa/Kconfig.

* tag 'xtensa-20180914' of git://github.com/jcmvbkbc/linux-xtensa:
  xtensa: enable SG chaining in Kconfig
  xtensa: remove unnecessary KBUILD_SRC ifeq conditional
  xtensa: ISS: don't allocate memory in platform_setup

3 years agoMerge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Linus Torvalds [Fri, 14 Sep 2018 22:42:02 +0000 (12:42 -1000)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull arm64 fixes from Will Deacon:
 "The trickle of arm64 fixes continues to come in.

  Nothing that's the end of the world, but we've got a fix for PCI IO
  port accesses, an accidental naked "asm goto" and a fix to the
  vmcoreinfo PT_NOTE merged this time around which we'd like to get
  sorted before it becomes ABI.

   - Fix ioport_map() mapping the wrong physical address for some I/O
     BARs

   - Remove direct use of "asm goto", since some compilers don't like
     that

   - Ensure kimage_voffset is always present in vmcoreinfo PT_NOTE"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  asm-generic: io: Fix ioport_map() for !CONFIG_GENERIC_IOMAP && CONFIG_INDIRECT_PIO
  arm64: kernel: arch_crash_save_vmcoreinfo() should depend on CONFIG_CRASH_CORE
  arm64: jump_label.h: use asm_volatile_goto macro instead of "asm goto"

3 years agoMerge tag 'dmaengine-fix-4.19-rc4' of git://git.infradead.org/users/vkoul/slave-dma
Linus Torvalds [Fri, 14 Sep 2018 16:08:40 +0000 (06:08 -1000)]
Merge tag 'dmaengine-fix-4.19-rc4' of git://git.infradead.org/users/vkoul/slave-dma

Pull dmaengine fix from Vinod Koul:
 "Fix the mic_x100_dma driver to use devm_kzalloc for driver memory, so
  that it is freed properly when it unregisters from dmaengine using
  managed API"

* tag 'dmaengine-fix-4.19-rc4' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: mic_x100_dma: use devm_kzalloc to fix an issue

3 years agoMerge tag 'usb-4.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Linus Torvalds [Fri, 14 Sep 2018 15:59:48 +0000 (05:59 -1000)]
Merge tag 'usb-4.19-rc4' of git://git./linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are a number of small USB driver fixes for -rc4.

  The usual suspects of gadget, xhci, and dwc2/3 are in here, along with
  some reverts of reported problem changes, and a number of build
  documentation warning fixes. Full details are in the shortlog.

  All of these have been in linux-next with no reported issues"

* tag 'usb-4.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (28 commits)
  Revert "cdc-acm: implement put_char() and flush_chars()"
  usb: Change usb_of_get_companion_dev() place to usb/common
  usb: xhci: fix interrupt transfer error happened on MTK platforms
  usb: cdc-wdm: Fix a sleep-in-atomic-context bug in service_outstanding_interrupt()
  usb: misc: uss720: Fix two sleep-in-atomic-context bugs
  usb: host: u132-hcd: Fix a sleep-in-atomic-context bug in u132_get_frame()
  usb: Avoid use-after-free by flushing endpoints early in usb_set_interface()
  linux/mod_devicetable.h: fix kernel-doc missing notation for typec_device_id
  usb/typec: fix kernel-doc notation warning for typec_match_altmode
  usb: Don't die twice if PCI xhci host is not responding in resume
  usb: mtu3: fix error of xhci port id when enable U3 dual role
  usb: uas: add support for more quirk flags
  USB: Add quirk to support DJI CineSSD
  usb: typec: fix kernel-doc parameter warning
  usb/dwc3/gadget: fix kernel-doc parameter warning
  USB: yurex: Check for truncation in yurex_read()
  USB: yurex: Fix buffer over-read in yurex_write()
  usb: host: xhci-plat: Iterate over parent nodes for finding quirks
  xhci: Fix use after free for URB cancellation on a reallocated endpoint
  USB: add quirk for WORLDE Controller KS49 or Prodipe MIDI 49C USB controller
  ...

3 years agoMerge tag 'tty-4.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Linus Torvalds [Fri, 14 Sep 2018 15:58:12 +0000 (05:58 -1000)]
Merge tag 'tty-4.19-rc4' of git://git./linux/kernel/git/gregkh/tty

Pull tty fixes from Greg KH:
 "Here are three small HVC tty driver fixes to resolve a reported
  regression from 4.19-rc1.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-4.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: hvc: hvc_write() fix break condition
  tty: hvc: hvc_poll() fix read loop batching
  tty: hvc: hvc_poll() fix read loop hang

3 years agoMerge tag 'staging-4.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh...
Linus Torvalds [Fri, 14 Sep 2018 15:43:43 +0000 (05:43 -1000)]
Merge tag 'staging-4.19-rc4' of git://git./linux/kernel/git/gregkh/staging

Pull staging/IIO driver fixes from Greg KH:
 "Here are a few small staging and iio driver fixes for -rc4.

  Nothing major, just a few small bugfixes for some reported issues, and
  a MAINTAINERS file update for the fbtft drivers.

  We also re-enable the building of the erofs filesystem as the XArray
  patches that were causing it to break never got merged in the -rc1
  cycle, so there's no reason it can't be turned back on for now. The
  problem that was previously there is now being handled in the Xarray
  tree at the moment, so it will not hit us again in the future.

  All of these patches have been in linux-next with no reported issues"

* tag 'staging-4.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: vboxvideo: Change address of scanout buffer on page-flip
  staging: vboxvideo: Fix IRQs no longer working
  staging: gasket: TODO: re-implement using UIO
  staging/fbtft: Update TODO and mailing lists
  staging: erofs: rename superblock flags (MS_xyz -> SB_xyz)
  iio: imu: st_lsm6dsx: take into account ts samples in wm configuration
  Revert "iio: temperature: maxim_thermocouple: add MAX31856 part"
  Revert "staging: erofs: disable compiling temporarile"
  MAINTAINERS: Switch a maintainer for drivers/staging/gasket
  staging: wilc1000: revert "fix TODO to compile spi and sdio components in single module"

3 years agoMerge tag 'char-misc-4.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregk...
Linus Torvalds [Fri, 14 Sep 2018 15:40:13 +0000 (05:40 -1000)]
Merge tag 'char-misc-4.19-rc4' of git://git./linux/kernel/git/gregkh/char-misc

Pull char/misc driver fixes from Greg KH:
 "Here are a small handful of char/misc driver fixes for 4.19-rc4.

  All of them are simple, resolving reported problems in a few drivers.
  Full details are in the shortlog.

  All of these have been in linux-next with no reported issues"

* tag 'char-misc-4.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  firmware: Fix security issue with request_firmware_into_buf()
  vmbus: don't return values for uninitalized channels
  fpga: dfl: fme: fix return value check in in pr_mgmt_init()
  misc: hmc6352: fix potential Spectre v1
  Tools: hv: Fix a bug in the key delete code
  misc: ibmvsm: Fix wrong assignment of return code
  android: binder: fix the race mmap and alloc_new_buf_locked
  mei: bus: need to unlink client before freeing
  mei: bus: fix hw module get/put balance
  mei: fix use-after-free in mei_cl_write
  mei: ignore not found client in the enumeration

3 years agoasm-generic: io: Fix ioport_map() for !CONFIG_GENERIC_IOMAP && CONFIG_INDIRECT_PIO
Andrew Murray [Thu, 13 Sep 2018 12:48:27 +0000 (13:48 +0100)]
asm-generic: io: Fix ioport_map() for !CONFIG_GENERIC_IOMAP && CONFIG_INDIRECT_PIO

The !CONFIG_GENERIC_IOMAP version of ioport_map uses MMIO_UPPER_LIMIT to
prevent users from making I/O accesses outside the expected I/O range -
however it erroneously treats MMIO_UPPER_LIMIT as a mask which is
contradictory to its other users.

The introduction of CONFIG_INDIRECT_PIO, which subtracts an arbitrary
amount from IO_SPACE_LIMIT to form MMIO_UPPER_LIMIT, results in ioport_map
mangling the given port rather than capping it.

We address this by aligning more closely with the CONFIG_GENERIC_IOMAP
implementation of ioport_map by using the comparison operator and
returning NULL where the port exceeds MMIO_UPPER_LIMIT. Though note that
we preserve the existing behavior of masking with IO_SPACE_LIMIT such that
we don't break existing buggy drivers that somehow rely on this masking.

Fixes: 5745392e0c2b ("PCI: Apply the new generic I/O management on PCI IO hosts")
Reported-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
3 years agoMerge tag 'printk-for-4.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Fri, 14 Sep 2018 05:37:08 +0000 (19:37 -1000)]
Merge tag 'printk-for-4.19-rc4' of git://git./linux/kernel/git/pmladek/printk

Pull printk fix from Petr Mladek:
 "Revert a commit that caused "quiet", "debug", and "loglevel" early
  parameters to be ignored for early boot messages"

* tag 'printk-for-4.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
  Revert "printk: make sure to print log on console."

3 years agoMerge tag 'ovl-fixes-4.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mszer...
Linus Torvalds [Fri, 14 Sep 2018 05:21:40 +0000 (19:21 -1000)]
Merge tag 'ovl-fixes-4.19-rc4' of git://git./linux/kernel/git/mszeredi/vfs

Pull overlayfs fixes from Miklos Szeredi:
 "This fixes a regression in the recent file stacking update, reported
  and fixed by Amir Goldstein. The fix is fairly trivial, but involves
  adding a fadvise() f_op and the associated churn in the vfs. As
  discussed on -fsdevel, there are other possible uses for this method,
  than allowing proper stacking for overlays.

  And there's one other fix for a syzkaller detected oops"

* tag 'ovl-fixes-4.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
  ovl: fix oopses in ovl_fill_super() failure paths
  ovl: add ovl_fadvise()
  vfs: implement readahead(2) using POSIX_FADV_WILLNEED
  vfs: add the fadvise() file operation
  Documentation/filesystems: update documentation of file_operations
  ovl: fix GPF in swapfile_activate of file from overlayfs over xfs
  ovl: respect FIEMAP_FLAG_SYNC flag

3 years agoMerge tag 'for-linus-20180913' of git://git.kernel.dk/linux-block
Linus Torvalds [Fri, 14 Sep 2018 05:16:11 +0000 (19:16 -1000)]
Merge tag 'for-linus-20180913' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:
 "Three fixes that should go into this series. This contains:

   - Increase number of policies supported by blk-cgroup.

     With blk-iolatency, we now have four in kernel, but we had a hard
     limit of three...

   - Fix regression in null_blk, where the zoned supported broke
     queue_mode=0 (bio based).

   - NVMe pull request, with a single fix for an issue in the rdma code"

* tag 'for-linus-20180913' of git://git.kernel.dk/linux-block:
  null_blk: fix zoned support for non-rq based operation
  blk-cgroup: increase number of supported policies
  nvmet-rdma: fix possible bogus dereference under heavy load

3 years agoMerge tag 'for-4.19/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device...
Linus Torvalds [Fri, 14 Sep 2018 05:12:55 +0000 (19:12 -1000)]
Merge tag 'for-4.19/dm-fixes' of git://git./linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - DM verity fix for crash due to using vmalloc'd buffers with the
   asynchronous crypto hadsh API.

 - Fix to both DM crypt and DM integrity targets to discontinue using
   CRYPTO_TFM_REQ_MAY_SLEEP because its use of GFP_KERNEL can lead to
   deadlock by recursing back into a filesystem.

 - Various DM raid fixes related to reshape and rebuild races.

 - Fix for DM thin-provisioning to avoid data corruption that was a
   side-effect of needing to abort DM thin metadata transaction due to
   running out of metadata space. Fix is to reserve a small amount of
   metadata space so that once it is used the DM thin-pool can finish
   its active transaction before switching to read-only mode.

* tag 'for-4.19/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm thin metadata: try to avoid ever aborting transactions
  dm raid: bump target version, update comments and documentation
  dm raid: fix RAID leg rebuild errors
  dm raid: fix rebuild of specific devices by updating superblock
  dm raid: fix stripe adding reshape deadlock
  dm raid: fix reshape race on small devices
  dm: disable CRYPTO_TFM_REQ_MAY_SLEEP to fix a GFP_KERNEL recursion deadlock
  dm verity: fix crash on bufio buffer that was allocated with vmalloc

3 years agoMerge tag 'drm-fixes-2018-09-14' of git://anongit.freedesktop.org/drm/drm
Linus Torvalds [Fri, 14 Sep 2018 04:54:47 +0000 (18:54 -1000)]
Merge tag 'drm-fixes-2018-09-14' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
 "This is the general drm fixes pull for rc4.

  i915:
   - Two GVT fixes (one for the mm reference issue you pointed out)
   - Gen 2 video playback fix
   - IPS timeout error suppression on Broadwell

  amdgpu:
   - Small memory leak
   - SR-IOV reset
   - locking fix
   - updated SDMA golden registers

  nouveau:
   - Remove some leftover debugging"

* tag 'drm-fixes-2018-09-14' of git://anongit.freedesktop.org/drm/drm:
  drm/nouveau/devinit: fix warning when PMU/PRE_OS is missing
  drm/amdgpu: fix error handling in amdgpu_cs_user_fence_chunk
  drm/i915/overlay: Allocate physical registers from stolen
  drm/amdgpu: move PSP init prior to IH in gpu reset
  drm/amdgpu: Fix SDMA hang in prt mode v2
  drm/amdgpu: fix amdgpu_mn_unlock() in the CS error path
  drm/i915/bdw: Increase IPS disable timeout to 100ms
  drm/i915/gvt: Fix the incorrect length of child_device_config issue
  drm/i915/gvt: Fix life cycle reference on KVM mm

3 years agoMerge tag 'pstore-v4.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees...
Linus Torvalds [Fri, 14 Sep 2018 04:52:41 +0000 (18:52 -1000)]
Merge tag 'pstore-v4.19-rc4' of git://git./linux/kernel/git/kees/linux

Pull pstore fix from Kees Cook:
 "This fixes a 6 year old pstore bug that everyone just got lucky in
  avoiding, likely due only using page-aligned persistent ram regions:

   - Handle page-vs-byte offset handling between iomap and vmap (Bin Yang)"

* tag 'pstore-v4.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  pstore: Fix incorrect persistent ram buffer mapping

3 years agoMerge tag 'mmc-v4.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Linus Torvalds [Fri, 14 Sep 2018 04:49:23 +0000 (18:49 -1000)]
Merge tag 'mmc-v4.19-rc2' of git://git./linux/kernel/git/ulfh/mmc

Pull MMC host fixes from Ulf Hansson:

 - meson-mx-sdio: Fix OF child-node lookup

 - omap_hsmmc: Fix wakeirq handling on removal

* tag 'mmc-v4.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: meson-mx-sdio: fix OF child-node lookup
  mmc: omap_hsmmc: fix wakeirq handling on removal

3 years agoMerge tag 'pinctrl-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw...
Linus Torvalds [Fri, 14 Sep 2018 04:47:45 +0000 (18:47 -1000)]
Merge tag 'pinctrl-v4.19-2' of git://git./linux/kernel/git/linusw/linux-pinctrl

Pull pin control fixes from Linus Walleij:

 - A complicated IRQ fix for the MSM driver (see commit)

 - Fix the group/function check in the Ingenic driver

 - Deal with a possible NULL pointer dereference in the Madera driver

* tag 'pinctrl-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: madera: Fix possible NULL pointer with pdata config
  pinctrl: ingenic: Fix group & function error checking
  pinctrl: msm: Really mask level interrupts to prevent latching

3 years agoMerge branch 'for-4.19-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj...
Linus Torvalds [Fri, 14 Sep 2018 02:35:25 +0000 (16:35 -1000)]
Merge branch 'for-4.19-fixes' of git://git./linux/kernel/git/tj/percpu

Pull percpu maintainership update from Tejun Heo:
 "This updates the MAINTAINERS file to transfer the percpu tree
  maintainership to Dennis Zhou.

  Dennis rewrote a good portion of the percpu allocator, knows most of
  percpu related code, is already listed as a co-maintainer, has been
  reliable, and now sits right behind me. I'll keep reviewing and
  involved with percpu stuff and am sure that Dennis will soon make a
  better maintainer than I ever was"

* 'for-4.19-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  MAINTAINERS: Make Dennis the percpu tree maintainer

3 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rkuo/linux...
Linus Torvalds [Fri, 14 Sep 2018 02:33:26 +0000 (16:33 -1000)]
Merge branch 'for-linus' of git://git./linux/kernel/git/rkuo/linux-hexagon-kernel

Pull hexagon fixes from Richard Kuo:
 "Some fixes for compile warnings"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rkuo/linux-hexagon-kernel:
  hexagon: modify ffs() and fls() to return int
  arch/hexagon: fix kernel/dma.c build warning

3 years agoMerge tag 's390-4.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Linus Torvalds [Fri, 14 Sep 2018 02:22:24 +0000 (16:22 -1000)]
Merge tag 's390-4.19-3' of git://git./linux/kernel/git/s390/linux

Pull s390 fixes from Martin Schwidefsky:

 - One fix for the zcrypt driver to correctly handle incomplete
   encryption/decryption operations.

 - A cleanup for the aqmask/apmask parsing to avoid variable length
   arrays on the stack.

* tag 's390-4.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/zcrypt: remove VLA usage from the AP bus
  s390/crypto: Fix return code checking in cbc_paes_crypt()

3 years agomm: get rid of vmacache_flush_all() entirely
Linus Torvalds [Thu, 13 Sep 2018 09:57:48 +0000 (23:57 -1000)]
mm: get rid of vmacache_flush_all() entirely

Jann Horn points out that the vmacache_flush_all() function is not only
potentially expensive, it's buggy too.  It also happens to be entirely
unnecessary, because the sequence number overflow case can be avoided by
simply making the sequence number be 64-bit.  That doesn't even grow the
data structures in question, because the other adjacent fields are
already 64-bit.

So simplify the whole thing by just making the sequence number overflow
case go away entirely, which gets rid of all the complications and makes
the code faster too.  Win-win.

[ Oleg Nesterov points out that the VMACACHE_FULL_FLUSHES statistics
  also just goes away entirely with this ]

Reported-by: Jann Horn <jannh@google.com>
Suggested-by: Will Deacon <will.deacon@arm.com>
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
3 years agoMerge branch 'linux-4.19' of git://github.com/skeggsb/linux into drm-fixes
Dave Airlie [Thu, 13 Sep 2018 23:38:35 +0000 (09:38 +1000)]
Merge branch 'linux-4.19' of git://github.com/skeggsb/linux into drm-fixes

One more nouveau fix to remove some debug warnings.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CABDvA==GF63dy8a9j611=-0x8G6FRu7uC-ZQypsLO_hqV4OAcA@mail.gmail.com
3 years agoMerge branch 'drm-fixes-4.19' of git://people.freedesktop.org/~agd5f/linux into drm...
Dave Airlie [Thu, 13 Sep 2018 23:35:55 +0000 (09:35 +1000)]
Merge branch 'drm-fixes-4.19' of git://people.freedesktop.org/~agd5f/linux into drm-fixes

A few fixes for 4.19:
- Fix a small memory leak
- SR-IOV reset fix
- Fix locking in MMU-notifier error path
- Updated SDMA golden settings to fix a PRT hang

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180912154735.2683-1-alexander.deucher@amd.com
3 years agoMerge tag 'drm-intel-fixes-2018-09-11' of git://anongit.freedesktop.org/drm/drm-intel...
Dave Airlie [Thu, 13 Sep 2018 23:33:05 +0000 (09:33 +1000)]
Merge tag 'drm-intel-fixes-2018-09-11' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

This contains a regression fix for video playbacks on gen 2 hardware,
a IPS timeout error suppression on Broadwell and GVT bucked with
"Most critical one is to fix KVM's mm reference when we access guest memory,
issue was raised by Linus [1], and another one with virtual opregion fix."

[1] - https://lists.freedesktop.org/archives/intel-gvt-dev/2018-August/004130.html

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180911223229.GA30328@intel.com
3 years agoMAINTAINERS: Make Dennis the percpu tree maintainer
Tejun Heo [Thu, 13 Sep 2018 19:16:36 +0000 (12:16 -0700)]
MAINTAINERS: Make Dennis the percpu tree maintainer

Dennis rewrote a significant portion of the percpu allocator and has
shown that he can respond in a timely and helpful manner when issues
are reported against percpu allocator.

Let's make Dennis the percpu tree maintainer.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
3 years agopstore: Fix incorrect persistent ram buffer mapping
Bin Yang [Wed, 12 Sep 2018 03:36:34 +0000 (03:36 +0000)]
pstore: Fix incorrect persistent ram buffer mapping

persistent_ram_vmap() returns the page start vaddr.
persistent_ram_iomap() supports non-page-aligned mapping.

persistent_ram_buffer_map() always adds offset-in-page to the vaddr
returned from these two functions, which causes incorrect mapping of
non-page-aligned persistent ram buffer.

By default ftrace_size is 4096 and max_ftrace_cnt is nr_cpu_ids. Without
this patch, the zone_sz in ramoops_init_przs() is 4096/nr_cpu_ids which
might not be page aligned. If the offset-in-page > 2048, the vaddr will be
in next page. If the next page is not mapped, it will cause kernel panic:

[    0.074231] BUG: unable to handle kernel paging request at ffffa19e0081b000
...
[    0.075000] RIP: 0010:persistent_ram_new+0x1f8/0x39f
...
[    0.075000] Call Trace:
[    0.075000]  ramoops_init_przs.part.10.constprop.15+0x105/0x260
[    0.075000]  ramoops_probe+0x232/0x3a0
[    0.075000]  platform_drv_probe+0x3e/0xa0
[    0.075000]  driver_probe_device+0x2cd/0x400
[    0.075000]  __driver_attach+0xe4/0x110
[    0.075000]  ? driver_probe_device+0x400/0x400
[    0.075000]  bus_for_each_dev+0x70/0xa0
[    0.075000]  driver_attach+0x1e/0x20
[    0.075000]  bus_add_driver+0x159/0x230
[    0.075000]  ? do_early_param+0x95/0x95
[    0.075000]  driver_register+0x70/0xc0
[    0.075000]  ? init_pstore_fs+0x4d/0x4d
[    0.075000]  __platform_driver_register+0x36/0x40
[    0.075000]  ramoops_init+0x12f/0x131
[    0.075000]  do_one_initcall+0x4d/0x12c
[    0.075000]  ? do_early_param+0x95/0x95
[    0.075000]  kernel_init_freeable+0x19b/0x222
[    0.075000]  ? rest_init+0xbb/0xbb
[    0.075000]  kernel_init+0xe/0xfc
[    0.075000]  ret_from_fork+0x3a/0x50

Signed-off-by: Bin Yang <bin.yang@intel.com>
[kees: add comments describing the mapping differences, updated commit log]
Fixes: 24c3d2f342ed ("staging: android: persistent_ram: Make it possible to use memory outside of bootmem")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
3 years agoMerge tag 'pci-v4.19-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaa...
Linus Torvalds [Thu, 13 Sep 2018 05:39:56 +0000 (19:39 -1000)]
Merge tag 'pci-v4.19-fixes-1' of git://git./linux/kernel/git/helgaas/pci

Pull PCI fixes from Bjorn Helgaas:

 - Add Tyrel Datwyler as maintainer for PPC64 RPA hotplug (Tyrel
   Datwyler)

 - Add Gustavo Pimentel as DesignWare PCI maintainer (Joao Pinto)

 - Fix a Switchtec Spectre v1 vulnerability (Gustavo A. R. Silva)

 - Revert an unnecessary Intel 300 ACS quirk (Mika Westerberg)

 - Fix pciehp hot-add/powerfault detection that left indicators in wrong
   state (Keith Busch)

 - Fix pci_reset_bus() logic error (Dennis Dalessandro)

 - Revert IB/hfi1 PCI reset change that caused a deadlock (Dennis
   Dalessandro)

 - Allow enabling PASID on Root Complex Integrated Endpoints (Felix
   Kuehling)

* tag 'pci-v4.19-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: Fix enabling of PASID on RC integrated endpoints
  IB/hfi1,PCI: Allow bus reset while probing
  PCI: Fix faulty logic in pci_reset_bus()
  PCI: pciehp: Fix hot-add vs powerfault detection order
  switchtec: Fix Spectre v1 vulnerability
  Revert "PCI: Add ACS quirk for Intel 300 series"
  MAINTAINERS: Add Gustavo Pimentel as DesignWare PCI maintainer
  MAINTAINERS: Add entries for PPC64 RPA PCI hotplug drivers

3 years agoMerge tag 'for-linus-4.19' of git://github.com/cminyard/linux-ipmi
Linus Torvalds [Thu, 13 Sep 2018 05:33:56 +0000 (19:33 -1000)]
Merge tag 'for-linus-4.19' of git://github.com/cminyard/linux-ipmi

Pull IPMI bugfixes from Corey Minyard:
 "A few fixes that came around or after the merge window, except for
  commit cd2315d471f4 ("ipmi: kcs_bmc: don't change device name") which
  is for a driver that very few people use, and those people need the
  change"

* tag 'for-linus-4.19' of git://github.com/cminyard/linux-ipmi:
  ipmi: Fix NULL pointer dereference in ssif_probe
  ipmi: Fix I2C client removal in the SSIF driver
  ipmi: Move BT capabilities detection to the detect call
  ipmi: Rework SMI registration failure
  ipmi: kcs_bmc: don't change device name

3 years agoMerge tag 'drm-fixes-2018-09-12' of git://anongit.freedesktop.org/drm/drm
Linus Torvalds [Thu, 13 Sep 2018 03:36:47 +0000 (17:36 -1000)]
Merge tag 'drm-fixes-2018-09-12' of git://anongit.freedesktop.org/drm/drm

Pull drm nouveau fixes from Dave Airlie:
 "I'm sending this separately as it's a bit larger than I generally like
  for one driver, but it does contain a bunch of make my nvidia laptop
  not die (runpm) and a bunch to make my docking station and monitor
  display stuff (mst) fixes.

  Lyude has spent a lot of time on these, and we are putting the fixes
  into distro kernels as well asap, as it helps a bunch of standard
  Lenovo laptops, so I'm fairly happy things are better than they were
  before these patches, but I decided to split them out just for
  clarification"

* tag 'drm-fixes-2018-09-12' of git://anongit.freedesktop.org/drm/drm:
  drm/nouveau/disp/gm200-: enforce identity-mapped SOR assignment for LVDS/eDP panels
  drm/nouveau/disp: fix DP disable race
  drm/nouveau/disp: move eDP panel power handling
  drm/nouveau/disp: remove unused struct member
  drm/nouveau/TBDdevinit: don't fail when PMU/PRE_OS is missing from VBIOS
  drm/nouveau/mmu: don't attempt to dereference vmm without valid instance pointer
  drm/nouveau: fix oops in client init failure path
  drm/nouveau: Fix nouveau_connector_ddc_detect()
  drm/nouveau/drm/nouveau: Don't forget to cancel hpd_work on suspend/unload
  drm/nouveau/drm/nouveau: Prevent handling ACPI HPD events too early
  drm/nouveau: Reset MST branching unit before enabling
  drm/nouveau: Only write DP_MSTM_CTRL when needed
  drm/nouveau: Remove useless poll_enable() call in drm_load()
  drm/nouveau: Remove useless poll_disable() call in switcheroo_set_state()
  drm/nouveau: Remove useless poll_enable() call in switcheroo_set_state()
  drm/nouveau: Fix deadlocks in nouveau_connector_detect()
  drm/nouveau/drm/nouveau: Use pm_runtime_get_noresume() in connector_detect()
  drm/nouveau/drm/nouveau: Fix deadlock with fb_helper with async RPM requests
  drm/nouveau: Remove duplicate poll_enable() in pmops_runtime_suspend()
  drm/nouveau/drm/nouveau: Fix bogus drm_kms_helper_poll_enable() placement

3 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Linus Torvalds [Thu, 13 Sep 2018 03:32:50 +0000 (17:32 -1000)]
Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:

 1) Fix up several Kconfig dependencies in netfilter, from Martin Willi
    and Florian Westphal.

 2) Memory leak in be2net driver, from Petr Oros.

 3) Memory leak in E-Switch handling of mlx5 driver, from Raed Salem.

 4) mlx5_attach_interface needs to check for errors, from Huy Nguyen.

 5) tipc_release() needs to orphan the sock, from Cong Wang.

 6) Need to program TxConfig register after TX/RX is enabled in r8169
    driver, not beforehand, from Maciej S. Szmigiero.

 7) Handle 64K PAGE_SIZE properly in ena driver, from Netanel Belgazal.

 8) Fix crash regression in ip_do_fragment(), from Taehee Yoo.

 9) syzbot can create conditions where kernel log is flooded with
    synflood warnings due to creation of many listening sockets, fix
    that. From Willem de Bruijn.

10) Fix RCU issues in rds socket layer, from Cong Wang.

11) Fix vlan matching in nfp driver, from Pieter Jansen van Vuuren.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (59 commits)
  nfp: flower: reject tunnel encap with ipv6 outer headers for offloading
  nfp: flower: fix vlan match by checking both vlan id and vlan pcp
  tipc: check return value of __tipc_dump_start()
  s390/qeth: don't dump past end of unknown HW header
  s390/qeth: use vzalloc for QUERY OAT buffer
  s390/qeth: switch on SG by default for IQD devices
  s390/qeth: indicate error when netdev allocation fails
  rds: fix two RCU related problems
  r8169: Clear RTL_FLAG_TASK_*_PENDING when clearing RTL_FLAG_TASK_ENABLED
  erspan: fix error handling for erspan tunnel
  erspan: return PACKET_REJECT when the appropriate tunnel is not found
  tcp: rate limit synflood warnings further
  MIPS: lantiq: dma: add dev pointer
  netfilter: xt_hashlimit: use s->file instead of s->private
  netfilter: nfnetlink_queue: Solve the NFQUEUE/conntrack clash for NF_REPEAT
  netfilter: cttimeout: ctnl_timeout_find_get() returns incorrect pointer to type
  netfilter: conntrack: timeout interface depend on CONFIG_NF_CONNTRACK_TIMEOUT
  netfilter: conntrack: reset tcp maxwin on re-register
  qmi_wwan: Support dynamic config on Quectel EP06
  ethernet: renesas: convert to SPDX identifiers
  ...

3 years agodrm/nouveau/devinit: fix warning when PMU/PRE_OS is missing
Ben Skeggs [Thu, 13 Sep 2018 00:56:38 +0000 (10:56 +1000)]
drm/nouveau/devinit: fix warning when PMU/PRE_OS is missing

Messed up when sending pull request and sent an outdated version of
previous patch, this fixes it up to remove warnings.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
3 years agonull_blk: fix zoned support for non-rq based operation
Jens Axboe [Thu, 13 Sep 2018 00:21:11 +0000 (18:21 -0600)]
null_blk: fix zoned support for non-rq based operation

The supported added for zones in null_blk seem to assume that only rq
based operation is possible. But this depends on the queue_mode setting,
if this is set to 0, then cmd->bio is what we need to be operating on.
Right now any attempt to load null_blk with queue_mode=0 will
insta-crash, since cmd->rq is NULL and null_handle_cmd() assumes it to
always be set.

Make the zoned code deal with bio's instead, or pass in the
appropriate sector/nr_sectors instead.

Fixes: ca4b2a011948 ("null_blk: add zone support")
Tested-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
3 years agoMerge branch 'nfp-flower-fixes'
David S. Miller [Wed, 12 Sep 2018 20:18:30 +0000 (13:18 -0700)]
Merge branch 'nfp-flower-fixes'

Jakub Kicinski says:

====================
nfp: flower: fixes for flower offload

Two fixes for flower matching and tunnel encap.  Pieter fixes
VLAN matching if the entire VLAN id is masked out and match
is only performed on the PCP field.  Louis adds validation of
tunnel flags for encap, most importantly we should not offload
actions on IPv6 tunnels if it's not supported.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonfp: flower: reject tunnel encap with ipv6 outer headers for offloading
Louis Peens [Tue, 11 Sep 2018 13:38:45 +0000 (06:38 -0700)]
nfp: flower: reject tunnel encap with ipv6 outer headers for offloading

This fixes a bug where ipv6 tunnels would report that it is
getting offloaded to hardware but would actually be rejected
by hardware.

Fixes: b27d6a95a70d ("nfp: compile flower vxlan tunnel set actions")
Signed-off-by: Louis Peens <louis.peens@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agonfp: flower: fix vlan match by checking both vlan id and vlan pcp
Pieter Jansen van Vuuren [Tue, 11 Sep 2018 13:38:44 +0000 (06:38 -0700)]
nfp: flower: fix vlan match by checking both vlan id and vlan pcp

Previously we only checked if the vlan id field is present when trying
to match a vlan tag. The vlan id and vlan pcp field should be treated
independently.

Fixes: 5571e8c9f241 ("nfp: extend flower matching capabilities")
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agotipc: check return value of __tipc_dump_start()
Cong Wang [Tue, 11 Sep 2018 22:12:17 +0000 (15:12 -0700)]
tipc: check return value of __tipc_dump_start()

When __tipc_dump_start() fails with running out of memory,
we have no reason to continue, especially we should avoid
calling tipc_dump_done().

Fixes: 8f5c5fcf3533 ("tipc: call start and done ops directly in __tipc_nl_compat_dumpit()")
Reported-and-tested-by: syzbot+3f8324abccfbf8c74a9f@syzkaller.appspotmail.com
Cc: Jon Maloy <jon.maloy@ericsson.com>
Cc: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoMerge branch 'qeth-fixes'
David S. Miller [Wed, 12 Sep 2018 20:12:52 +0000 (13:12 -0700)]
Merge branch 'qeth-fixes'

Julian Wiedmann says:

====================
s390/qeth: fixes 2018-09-12

please apply the following qeth fixes for -net.

Patch 1 resolves a regression in an error path, while patch 2 enables
the SG support by default that was newly introduced with 4.19.
Patch 3 takes care of a longstanding problem with large-order
allocations, and patch 4 fixes a potential out-of-bounds access.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agos390/qeth: don't dump past end of unknown HW header
Julian Wiedmann [Wed, 12 Sep 2018 13:31:35 +0000 (15:31 +0200)]
s390/qeth: don't dump past end of unknown HW header

For inbound data with an unsupported HW header format, only dump the
actual HW header. We have no idea how much payload follows it, and what
it contains. Worst case, we dump past the end of the Inbound Buffer and
access whatever is located next in memory.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agos390/qeth: use vzalloc for QUERY OAT buffer
Wenjia Zhang [Wed, 12 Sep 2018 13:31:34 +0000 (15:31 +0200)]
s390/qeth: use vzalloc for QUERY OAT buffer

qeth_query_oat_command() currently allocates the kernel buffer for
the SIOC_QETH_QUERY_OAT ioctl with kzalloc. So on systems with
fragmented memory, large allocations may fail (eg. the qethqoat tool by
default uses 132KB).

Solve this issue by using vzalloc, backing the allocation with
non-contiguous memory.

Signed-off-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agos390/qeth: switch on SG by default for IQD devices
Julian Wiedmann [Wed, 12 Sep 2018 13:31:33 +0000 (15:31 +0200)]
s390/qeth: switch on SG by default for IQD devices

Scatter-gather transmit brings a nice performance boost. Considering the
rather large MTU sizes at play, it's also totally the Right Thing To Do.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agos390/qeth: indicate error when netdev allocation fails
Julian Wiedmann [Wed, 12 Sep 2018 13:31:32 +0000 (15:31 +0200)]
s390/qeth: indicate error when netdev allocation fails

Bailing out on allocation error is nice, but we also need to tell the
ccwgroup core that creating the qeth groupdev failed.

Fixes: d3d1b205e89f ("s390/qeth: allocate netdevice early")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoMerge tag 'riscv-for-linus-4.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Wed, 12 Sep 2018 16:51:27 +0000 (06:51 -1000)]
Merge tag 'riscv-for-linus-4.19-rc3' of git://git./linux/kernel/git/palmer/riscv-linux

Pull RISC-V fix from Palmer Dabbelt:
 "This contains what I hope to be the last RISC-V patch for 4.19.

  It fixes a bug in our initramfs support by removing some broken and
  obselete code"

* tag 'riscv-for-linus-4.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
  riscv: Do not overwrite initrd_start and initrd_end

3 years agoMerge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Linus Torvalds [Wed, 12 Sep 2018 16:44:03 +0000 (06:44 -1000)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "Three fixes, all in drivers (qedi and iscsi target) so no wider impact
  even if the code changes are a bit extensive"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: qedi: Add the CRC size within iSCSI NVM image
  scsi: iscsi: target: Fix conn_ops double free
  scsi: iscsi: target: Set conn->sess to NULL when iscsi_login_set_conn_values fails

3 years agos390/zcrypt: remove VLA usage from the AP bus
Martin Schwidefsky [Wed, 5 Sep 2018 05:45:11 +0000 (07:45 +0200)]
s390/zcrypt: remove VLA usage from the AP bus

The use of variable length arrays on the stack is deprecated.
git commit 3d8f60d38e249f989a7fca9c2370c31c3d5487e1
"s390/zcrypt: hex string mask improvements for apmask and aqmask."
added three new VLA arrays. Remove them again.

Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
3 years agofirmware: Fix security issue with request_firmware_into_buf()
Rishabh Bhatnagar [Fri, 31 Aug 2018 15:43:31 +0000 (08:43 -0700)]
firmware: Fix security issue with request_firmware_into_buf()

When calling request_firmware_into_buf() with the FW_OPT_NOCACHE flag
it is expected that firmware is loaded into buffer from memory.
But inside alloc_lookup_fw_priv every new firmware that is loaded is
added to the firmware cache (fwc) list head. So if any driver requests
a firmware that is already loaded the code iterates over the above
mentioned list and it can end up giving a pointer to other device driver's
firmware buffer.
Also the existing copy may either be modified by drivers, remote processors
or even freed. This causes a potential security issue with batched requests
when using request_firmware_into_buf.

Fix alloc_lookup_fw_priv to not add to the fwc head list if FW_OPT_NOCACHE
is set, and also don't do the lookup in the list.

Fixes: 0e742e9275 ("firmware: provide infrastructure to make fw caching optional")
[mcgrof: broken since feature introduction on v4.8]

Cc: stable@vger.kernel.org # v4.8+
Signed-off-by: Vikram Mulukutla <markivx@codeaurora.org>
Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agovmbus: don't return values for uninitalized channels
Stephen Hemminger [Mon, 20 Aug 2018 21:16:40 +0000 (21:16 +0000)]
vmbus: don't return values for uninitalized channels

For unsupported device types, the vmbus channel ringbuffer is never
initialized, and therefore reading the sysfs files will return garbage
or cause a kernel OOPS.

Fixes: c2e5df616e1a ("vmbus: add per-channel sysfs info")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Cc: <stable@vger.kernel.org> # 4.15
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agofpga: dfl: fme: fix return value check in in pr_mgmt_init()
Wei Yongjun [Thu, 16 Aug 2018 19:42:13 +0000 (14:42 -0500)]
fpga: dfl: fme: fix return value check in in pr_mgmt_init()

In case of error, the function dfl_fme_create_region() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check should
be replaced with IS_ERR().

Fixes: 29de76240e86 ("fpga: dfl: fme: add partial reconfiguration sub feature support")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Moritz Fischer <mdf@kernel.org>
Acked-by: Alan Tull <atull@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agomisc: hmc6352: fix potential Spectre v1
Gustavo A. R. Silva [Wed, 15 Aug 2018 15:50:41 +0000 (10:50 -0500)]
misc: hmc6352: fix potential Spectre v1

val is indirectly controlled by user-space, hence leading to a
potential exploitation of the Spectre variant 1 vulnerability.

This issue was detected with the help of Smatch:

drivers/misc/hmc6352.c:54 compass_store() warn: potential spectre issue
'map' [r]

Fix this by sanitizing val before using it to index map

Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].

[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2

Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoTools: hv: Fix a bug in the key delete code
K. Y. Srinivasan [Fri, 10 Aug 2018 23:06:07 +0000 (23:06 +0000)]
Tools: hv: Fix a bug in the key delete code

Fix a bug in the key delete code - the num_records range
from 0 to num_records-1.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reported-by: David Binderman <dcb314@hotmail.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agomisc: ibmvsm: Fix wrong assignment of return code
Bryant G. Ly [Mon, 6 Aug 2018 13:31:00 +0000 (08:31 -0500)]
misc: ibmvsm: Fix wrong assignment of return code

Currently the assignment is flipped and rc is always 0.

Signed-off-by: Bryant G. Ly <bryantly@linux.ibm.com>
Fixes: 0eca353e7ae7 ("misc: IBM Virtual Management Channel Driver (VMC)")
Reviewed-by: Bradley Warrum <bwarrum@us.ibm.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoandroid: binder: fix the race mmap and alloc_new_buf_locked
Minchan Kim [Thu, 23 Aug 2018 05:29:56 +0000 (14:29 +0900)]
android: binder: fix the race mmap and alloc_new_buf_locked

There is RaceFuzzer report like below because we have no lock to close
below the race between binder_mmap and binder_alloc_new_buf_locked.
To close the race, let's use memory barrier so that if someone see
alloc->vma is not NULL, alloc->vma_vm_mm should be never NULL.

(I didn't add stable mark intentionallybecause standard android
userspace libraries that interact with binder (libbinder & libhwbinder)
prevent the mmap/ioctl race. - from Todd)

"
Thread interleaving:
CPU0 (binder_alloc_mmap_handler)              CPU1 (binder_alloc_new_buf_locked)
=====                                         =====
// drivers/android/binder_alloc.c
// #L718 (v4.18-rc3)
alloc->vma = vma;
                                              // drivers/android/binder_alloc.c
                                              // #L346 (v4.18-rc3)
                                              if (alloc->vma == NULL) {
                                                  ...
                                                  // alloc->vma is not NULL at this point
                                                  return ERR_PTR(-ESRCH);
                                              }
                                              ...
                                              // #L438
                                              binder_update_page_range(alloc, 0,
                                                      (void *)PAGE_ALIGN((uintptr_t)buffer->data),
                                                      end_page_addr);

                                              // In binder_update_page_range() #L218
                                              // But still alloc->vma_vm_mm is NULL here
                                              if (need_mm && mmget_not_zero(alloc->vma_vm_mm))
alloc->vma_vm_mm = vma->vm_mm;

Crash Log:
==================================================================
BUG: KASAN: null-ptr-deref in __atomic_add_unless include/asm-generic/atomic-instrumented.h:89 [inline]
BUG: KASAN: null-ptr-deref in atomic_add_unless include/linux/atomic.h:533 [inline]
BUG: KASAN: null-ptr-deref in mmget_not_zero include/linux/sched/mm.h:75 [inline]
BUG: KASAN: null-ptr-deref in binder_update_page_range+0xece/0x18e0 drivers/android/binder_alloc.c:218
Write of size 4 at addr 0000000000000058 by task syz-executor0/11184

CPU: 1 PID: 11184 Comm: syz-executor0 Not tainted 4.18.0-rc3 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.2-0-g33fbe13 by qemu-project.org 04/01/2014
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x16e/0x22c lib/dump_stack.c:113
 kasan_report_error mm/kasan/report.c:352 [inline]
 kasan_report+0x163/0x380 mm/kasan/report.c:412
 check_memory_region_inline mm/kasan/kasan.c:260 [inline]
 check_memory_region+0x140/0x1a0 mm/kasan/kasan.c:267
 kasan_check_write+0x14/0x20 mm/kasan/kasan.c:278
 __atomic_add_unless include/asm-generic/atomic-instrumented.h:89 [inline]
 atomic_add_unless include/linux/atomic.h:533 [inline]
 mmget_not_zero include/linux/sched/mm.h:75 [inline]
 binder_update_page_range+0xece/0x18e0 drivers/android/binder_alloc.c:218
 binder_alloc_new_buf_locked drivers/android/binder_alloc.c:443 [inline]
 binder_alloc_new_buf+0x467/0xc30 drivers/android/binder_alloc.c:513
 binder_transaction+0x125b/0x4fb0 drivers/android/binder.c:2957
 binder_thread_write+0xc08/0x2770 drivers/android/binder.c:3528
 binder_ioctl_write_read.isra.39+0x24f/0x8e0 drivers/android/binder.c:4456
 binder_ioctl+0xa86/0xf34 drivers/android/binder.c:4596
 vfs_ioctl fs/ioctl.c:46 [inline]
 do_vfs_ioctl+0x154/0xd40 fs/ioctl.c:686
 ksys_ioctl+0x94/0xb0 fs/ioctl.c:701
 __do_sys_ioctl fs/ioctl.c:708 [inline]
 __se_sys_ioctl fs/ioctl.c:706 [inline]
 __x64_sys_ioctl+0x43/0x50 fs/ioctl.c:706
 do_syscall_64+0x167/0x4b0 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
"

Signed-off-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Martijn Coenen <maco@android.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agomei: bus: need to unlink client before freeing
Tomas Winkler [Mon, 27 Aug 2018 19:40:16 +0000 (22:40 +0300)]
mei: bus: need to unlink client before freeing

In case a client fails to connect in mei_cldev_enable(), the
caller won't call the mei_cldev_disable leaving the client
in a linked stated. Upon driver unload the client structure
will be freed in  mei_cl_bus_dev_release(), leaving a stale pointer
on a fail_list.  This will eventually end up in crash
during power down flow in mei_cl_set_disonnected().

RIP:  mei_cl_set_disconnected+0x5/0x260[mei]
Call trace:
mei_cl_all_disconnect+0x22/0x30
mei_reset+0x194/0x250
__synchronize_hardirq+0x43/0x50
_cond_resched+0x15/0x30
mei_me_intr_clear+0x20/0x100
mei_stop+0x76/0xb0
mei_me_shutdown+0x3f/0x80
pci_device_shutdown+0x34/0x60
kernel_restart+0x0e/0x30

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200455
Fixes: 'c110cdb17148 ("mei: bus: make a client pointer always available")'
Cc: <stable@vger.kernel.org> 4.10+
Tested-by: Georg Müller <georgmueller@gmx.net>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agomei: bus: fix hw module get/put balance
Tomas Winkler [Mon, 27 Aug 2018 19:40:15 +0000 (22:40 +0300)]
mei: bus: fix hw module get/put balance

In case the device is not connected it doesn't 'get'
hw module and hence should not 'put' it on disable.

Cc: <stable@vger.kernel.org> 4.16+
Fixes:'commit 257355a44b99 ("mei: make module referencing local to the bus.c")'
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200455
Tested-by: Georg Müller <georgmueller@gmx.net>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agomei: fix use-after-free in mei_cl_write
John Hubbard [Thu, 23 Aug 2018 06:16:58 +0000 (09:16 +0300)]
mei: fix use-after-free in mei_cl_write

KASAN reports a use-after-free during startup, in mei_cl_write:

    BUG: KASAN: use-after-free in mei_cl_write+0x601/0x870 [mei]
       (drivers/misc/mei/client.c:1770)

This is caused by commit 98e70866aacb ("mei: add support for variable
length mei headers."), which changed the return value from len, to
buf->size. That ends up using a stale buf pointer, because blocking
call, the cb (callback) is deleted in me_cl_complete() function.

However, fortunately, len remains unchanged throughout the function
(and I don't see anything else that would require re-reading buf->size
either), so the fix is to simply revert the change, and return len, as
before.

Fixes: 98e70866aacb ("mei: add support for variable length mei headers.")
CC: Arnd Bergmann <arnd@arndb.de>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agomei: ignore not found client in the enumeration
Alexander Usyskin [Mon, 6 Aug 2018 14:47:33 +0000 (17:47 +0300)]
mei: ignore not found client in the enumeration

Some of the ME clients are available only for BIOS operation and are
removed during hand off to an OS. However the removal is not instant.
A client may be visible on the client list when the mei driver requests
for enumeration, while the subsequent request for properties will be
answered with client not found error value. The default behavior
for an error is to perform client reset while this error is harmless and
the link reset should be prevented. This issue started to be visible due to
suspend/resume timing changes. Currently reported only on the Haswell
based system.

Fixes:
[33.564957] mei_me 0000:00:16.0: hbm: properties response: wrong status = 1 CLIENT_NOT_FOUND
[33.564978] mei_me 0000:00:16.0: mei_irq_read_handler ret = -71.
[33.565270] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000255 60002306 00000200 00004401 00000000 00000010

Cc: <stable@vger.kernel.org>
Reported-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agords: fix two RCU related problems
Cong Wang [Tue, 11 Sep 2018 01:27:26 +0000 (18:27 -0700)]
rds: fix two RCU related problems

When a rds sock is bound, it is inserted into the bind_hash_table
which is protected by RCU. But when releasing rds sock, after it
is removed from this hash table, it is freed immediately without
respecting RCU grace period. This could cause some use-after-free
as reported by syzbot.

Mark the rds sock with SOCK_RCU_FREE before inserting it into the
bind_hash_table, so that it would be always freed after a RCU grace
period.

The other problem is in rds_find_bound(), the rds sock could be
freed in between rhashtable_lookup_fast() and rds_sock_addref(),
so we need to extend RCU read lock protection in rds_find_bound()
to close this race condition.

Reported-and-tested-by: syzbot+8967084bcac563795dc6@syzkaller.appspotmail.com
Reported-by: syzbot+93a5839deb355537440f@syzkaller.appspotmail.com
Cc: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Cc: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Cc: rds-devel@oss.oracle.com
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oarcle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agor8169: Clear RTL_FLAG_TASK_*_PENDING when clearing RTL_FLAG_TASK_ENABLED
Kai-Heng Feng [Mon, 10 Sep 2018 17:51:43 +0000 (01:51 +0800)]
r8169: Clear RTL_FLAG_TASK_*_PENDING when clearing RTL_FLAG_TASK_ENABLED

After system suspend, sometimes the r8169 doesn't work when ethernet
cable gets pluggued.

This issue happens because rtl_reset_work() doesn't get called from
rtl8169_runtime_resume(), after system suspend.

In rtl_task(), RTL_FLAG_TASK_* only gets cleared if this condition is
met:
if (!netif_running(dev) ||
    !test_bit(RTL_FLAG_TASK_ENABLED, tp->wk.flags))
    ...

If RTL_FLAG_TASK_ENABLED was cleared during system suspend while
RTL_FLAG_TASK_RESET_PENDING was set, the next rtl_schedule_task() won't
schedule task as the flag is still there.

So in addition to clearing RTL_FLAG_TASK_ENABLED, also clears other
flags.

Cc: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoerspan: fix error handling for erspan tunnel
Haishuang Yan [Mon, 10 Sep 2018 14:19:48 +0000 (22:19 +0800)]
erspan: fix error handling for erspan tunnel

When processing icmp unreachable message for erspan tunnel, tunnel id
should be erspan_net_id instead of ipgre_net_id.

Fixes: 84e54fe0a5ea ("gre: introduce native tunnel support for ERSPAN")
Cc: William Tu <u9012063@gmail.com>
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Acked-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoerspan: return PACKET_REJECT when the appropriate tunnel is not found
Haishuang Yan [Mon, 10 Sep 2018 14:19:47 +0000 (22:19 +0800)]
erspan: return PACKET_REJECT when the appropriate tunnel is not found

If erspan tunnel hasn't been established, we'd better send icmp port
unreachable message after receive erspan packets.

Fixes: 84e54fe0a5ea ("gre: introduce native tunnel support for ERSPAN")
Cc: William Tu <u9012063@gmail.com>
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Acked-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agotcp: rate limit synflood warnings further
Willem de Bruijn [Sun, 9 Sep 2018 23:12:12 +0000 (19:12 -0400)]
tcp: rate limit synflood warnings further

Convert pr_info to net_info_ratelimited to limit the total number of
synflood warnings.

Commit 946cedccbd73 ("tcp: Change possible SYN flooding messages")
rate limits synflood warnings to one per listener.

Workloads that open many listener sockets can still see a high rate of
log messages. Syzkaller is one frequent example.

Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoMIPS: lantiq: dma: add dev pointer
Hauke Mehrtens [Sun, 9 Sep 2018 19:26:23 +0000 (21:26 +0200)]
MIPS: lantiq: dma: add dev pointer

dma_zalloc_coherent() now crashes if no dev pointer is given.
Add a dev pointer to the ltq_dma_channel structure and fill it in the
driver using it.

This fixes a bug introduced in kernel 4.19.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoxtensa: enable SG chaining in Kconfig
Max Filippov [Wed, 12 Sep 2018 05:12:59 +0000 (22:12 -0700)]
xtensa: enable SG chaining in Kconfig

Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
3 years agoxtensa: remove unnecessary KBUILD_SRC ifeq conditional
Masahiro Yamada [Wed, 12 Sep 2018 04:25:19 +0000 (13:25 +0900)]
xtensa: remove unnecessary KBUILD_SRC ifeq conditional

You can always prefix variant/platform header search paths with
$(srctree)/ because $(srctree) is '.' for in-tree building.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
3 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf
David S. Miller [Wed, 12 Sep 2018 04:17:30 +0000 (21:17 -0700)]
Merge git://git./pub/scm/linux/kernel/git/pablo/nf

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for you net tree:

1) Remove duplicated include at the end of UDP conntrack, from Yue Haibing.

2) Restore conntrack dependency on xt_cluster, from Martin Willi.

3) Fix splat with GSO skbs from the checksum target, from Florian Westphal.

4) Rework ct timeout support, the template strategy to attach custom timeouts
   is not correct since it will not work in conjunction with conntrack zones
   and we have a possible free after use when removing the rule due to missing
   refcounting. To fix these problems, do not use conntrack template at all
   and set custom timeout on the already valid conntrack object. This
   fix comes with a preparation patch to simplify timeout adjustment by
   initializating the first position of the timeout array for all of the
   existing trackers. Patchset from Florian Westphal.

5) Fix missing dependency on from IPv4 chain NAT type, from Florian.

6) Release chain reference counter from the flush path, from Taehee Yoo.

7) After flushing an iptables ruleset, conntrack hooks are unregistered
   and entries are left stale to be cleaned up by the timeout garbage
   collector. No TCP tracking is done on established flows by this time.
   If ruleset is reloaded, then hooks are registered again and TCP
   tracking is restored, which considers packets to be invalid. Clear
   window tracking to exercise TCP flow pickup from the middle given that
   history is lost for us. Again from Florian.

8) Fix crash from netlink interface with CONFIG_NF_CONNTRACK_TIMEOUT=y
   and CONFIG_NF_CT_NETLINK_TIMEOUT=n.

9) Broken CT target due to returning incorrect type from
   ctnl_timeout_find_get().

10) Solve conntrack clash on NF_REPEAT verdicts too, from Michal Vaner.

11) Missing conversion of hashlimit sysctl interface to new API, from
    Cong Wang.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agoPCI: Fix enabling of PASID on RC integrated endpoints
Felix Kuehling [Mon, 10 Sep 2018 19:27:42 +0000 (15:27 -0400)]
PCI: Fix enabling of PASID on RC integrated endpoints

Set the eetlp_prefix_path on PCIE_EXP_TYPE_RC_END devices to allow PASID
to be enabled on them.  This fixes IOMMUv2 initialization on AMD Carrizo
APUs.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=201079
Fixes: 7ce3f912ae ("PCI: Enable PASID only if entire path supports End-End TLP prefixes")
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
3 years agoIB/hfi1,PCI: Allow bus reset while probing
Dennis Dalessandro [Fri, 31 Aug 2018 17:34:14 +0000 (10:34 -0700)]
IB/hfi1,PCI: Allow bus reset while probing

Calling into the new API to reset the secondary bus results in a deadlock.
This occurs because the device/bus is already locked at probe time.
Reverting back to the old behavior while the API is improved.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=200985
Fixes: c6a44ba950d1 ("PCI: Rename pci_try_reset_bus() to pci_reset_bus()")
Fixes: 409888e0966e ("IB/hfi1: Use pci_try_reset_bus() for initiating PCI Secondary Bus Reset")
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Cc: Sinan Kaya <okaya@codeaurora.org>
3 years agoPCI: Fix faulty logic in pci_reset_bus()
Dennis Dalessandro [Wed, 5 Sep 2018 16:08:03 +0000 (16:08 +0000)]
PCI: Fix faulty logic in pci_reset_bus()

The pci_reset_bus() function calls pci_probe_reset_slot() to determine
whether to call the slot or bus reset.  The check has faulty logic in that
it does not account for pci_probe_reset_slot() being able to return an
errno.  Fix by only calling the slot reset when the function returns 0.

Fixes: 811c5cb37df4 ("PCI: Unify try slot and bus reset API")
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Cc: Sinan Kaya <okaya@codeaurora.org>
3 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Linus Torvalds [Wed, 12 Sep 2018 02:23:21 +0000 (16:23 -1000)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jikos/hid

Pull HID fixes from Jiri Kosina:

 - functional regression fix for sensor-hub driver from Hans de Goede

 - stop doing device reset for i2c-hid devices, which unbreaks some of
   them (and is in line with the specification), from Kai-Heng Feng

 - error handling fix for hid-core from Gustavo A. R. Silva

 - functional regression fix for some Elan panels from Benjamin
   Tissoires

 - a few new device ID additions and misc small fixes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: i2c-hid: Don't reset device upon system resume
  HID: sensor-hub: Restore fixup for Lenovo ThinkPad Helix 2 sensor hub report
  HID: core: fix NULL pointer dereference
  HID: core: fix grouping by application
  HID: multitouch: fix Elan panels with 2 input modes declaration
  HID: hid-saitek: Add device ID for RAT 7 Contagion
  HID: core: fix memory leak on probe
  HID: input: fix leaking custom input node name
  HID: add support for Apple Magic Keyboards
  HID: i2c-hid: Fix flooded incomplete report after S3 on Rayd touchscreen
  HID: intel-ish-hid: Enable Sunrise Point-H ish driver

3 years agodrm/amdgpu: fix error handling in amdgpu_cs_user_fence_chunk
Christian König [Mon, 10 Sep 2018 13:52:55 +0000 (15:52 +0200)]
drm/amdgpu: fix error handling in amdgpu_cs_user_fence_chunk

Slowly leaking memory one page at a time :)

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agoMerge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Linus Torvalds [Tue, 11 Sep 2018 18:46:11 +0000 (08:46 -1000)]
Merge tag 'for-linus' of git://git./linux/kernel/git/rdma/rdma

Pull rdma fixes from Jason Gunthorpe:
 "This fixes one major regression with NFS and mlx4 due to the max_sg
  rework in this merge window, tidies a few minor error_path
  regressions, and various small fixes.

  The HFI1 driver is broken this cycle due to a regression caused by a
  PCI change, it is looking like Bjorn will merge a fix for this. Also,
  the lingering ipoib issue I mentioned earlier still remains unfixed.

  Summary:

   - Fix possible FD type confusion crash

   - Fix a user trigger-able crash in cxgb4

   - Fix bad handling of IOMMU resources causing user controlled leaking
     in bnxt

   - Add missing locking in ipoib to fix a rare 'stuck tx' situation

   - Add missing locking in cma

   - Add two missing missing uverbs cleanups on failure paths,
     regressions from this merge window

   - Fix a regression from this merge window that caused RDMA NFS to not
     work with the mlx4 driver due to the max_sg changes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/mlx4: Ensure that maximal send/receive SGE less than supported by HW
  RDMA/cma: Protect cma dev list with lock
  RDMA/uverbs: Fix error cleanup path of ib_uverbs_add_one()
  bnxt_re: Fix couple of memory leaks that could lead to IOMMU call traces
  IB/ipoib: Avoid a race condition between start_xmit and cm_rep_handler
  iw_cxgb4: only allow 1 flush on user qps
  IB/core: Release object lock if destroy failed
  RDMA/ucma: check fd type in ucma_migrate_id()

3 years agoblk-cgroup: increase number of supported policies
Jens Axboe [Tue, 11 Sep 2018 16:59:53 +0000 (10:59 -0600)]
blk-cgroup: increase number of supported policies

After merging the iolatency policy, we potentially now have 4 policies
being registered, but only support 3. This causes one of them to fail
loading. Takashi reports that BFQ no longer works for him, because it
fails to load due to policy registration failure.

Bump to 5 policies, and also add a warning for when we have exceeded
the global amount. If we have to touch this again, we should switch
to a dynamic scheme instead.

Reported-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Tested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
3 years agostaging: vboxvideo: Change address of scanout buffer on page-flip
Hans de Goede [Mon, 10 Sep 2018 18:30:39 +0000 (20:30 +0200)]
staging: vboxvideo: Change address of scanout buffer on page-flip

Commit 2408898e3b6c ("staging: vboxvideo: Add page-flip support") only
calls vbox_crtc_do_set_base() on page-flips, but despite that function's
name it only pins the new fb, unpins the old fb and sets
vbox_crtc->fb_offset. It does not program the hardware to scan out at the
new vbox_crtc->fb_offset value.

This was causing only every other frame (assuming page-flipping between 2
buffers) to be shown since we kept scanning out of the old (now unpinned!)
buffer.

This commit fixes this by adding code to vbox_crtc_page_flip() to tell
the hardware to scanout from the new fb_offset.

Fixes: 2408898e3b6c ("staging: vboxvideo: Add page-flip support")
Cc: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agostaging: vboxvideo: Fix IRQs no longer working
Hans de Goede [Mon, 10 Sep 2018 18:30:38 +0000 (20:30 +0200)]
staging: vboxvideo: Fix IRQs no longer working

Commit 1daddbc8dec5 ("staging: vboxvideo: Update driver to use
drm_dev_register.") replaced the obsolere drm_get_pci_dev() with
normal pci probe and remove functions.

But the new vbox_pci_probe() is missing a pci_enable_device() call,
causing interrupts to not be delivered. This causes resizes of the
vm window to not get seen by the drm/kms code.

This commit adds the missing pci_enable_device() call, fixing this.

Fixes: 1daddbc8dec5 ("staging: vboxvideo: Update driver to use ...")
Cc: Fabio Rafael da Rosa <fdr@pid42.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Nicholas Mc Guire <der.herr@hofr.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agodrm/i915/overlay: Allocate physical registers from stolen
Chris Wilson [Thu, 6 Sep 2018 19:01:43 +0000 (20:01 +0100)]
drm/i915/overlay: Allocate physical registers from stolen

Given that we are now reasonably confident in our ability to detect and
reserve the stolen memory (physical memory reserved for graphics by the
BIOS) for ourselves on most machines, we can put it to use. In this
case, we need a page to hold the overlay registers.

On an i915g running MythTv, H Buus noticed that

commit 6a2c4232ece145d8b5a8f95f767bd6d0d2d2f2bb
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Tue Nov 4 04:51:40 2014 -0800
drm/i915: Make the physical object coherent with GTT

introduced stuttering into his video playback. After discarding the
likely suspect of it being the physical cursor updates, we were left
with the use of the phys object for the overlay. And lo, if we
completely avoid using the phys object (allocated just once on module
load!) by switching to stolen memory, the stuttering goes away.

For lack of a better explanation, claim victory and kill two birds with
one stone.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107600
Fixes: 6a2c4232ece1 ("drm/i915: Make the physical object coherent with GTT")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180906190144.1272-1-chris@chris-wilson.co.uk
(cherry picked from commit c8124d399224d626728e2ffb95a1d564a7c06968)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
3 years agoPCI: pciehp: Fix hot-add vs powerfault detection order
Keith Busch [Wed, 5 Sep 2018 20:35:41 +0000 (14:35 -0600)]
PCI: pciehp: Fix hot-add vs powerfault detection order

If both hot-add and power fault were observed in a single interrupt, we
handled the hot-add first, then the power fault, in this path:

  pciehp_ist
    if (events & (PDC | DLLSC))
      pciehp_handle_presence_or_link_change
        case OFF_STATE:
          pciehp_enable_slot
            __pciehp_enable_slot
              board_added
                pciehp_power_on_slot
                  ctrl->power_fault_detected = 0
                  pcie_write_cmd(ctrl, PCI_EXP_SLTCTL_PWR_ON, PCI_EXP_SLTCTL_PCC)
                pciehp_green_led_on(p_slot)             # power LED on
pciehp_set_attention_status(p_slot, 0)  # attention LED off
    if ((events & PFD) && !ctrl->power_fault_detected)
      ctrl->power_fault_detected = 1
      pciehp_set_attention_status(1)                    # attention LED on
      pciehp_green_led_off(slot)                        # power LED off

This left the attention indicator on (even though the hot-add succeeded)
and the power indicator off (even though the slot power was on).

Fix this by checking for power faults before checking for new devices.

Prior to 0e94916e6091, this was successful because everything was chained
through work queues and the order was:

  INT_PRESENCE_ON -> INT_POWER_FAULT -> ENABLE_REQ

The ENABLE_REQ cleared the power fault at the end, but now everything is
handled inline with the interrupt thread, such that the work ENABLE_REQ was
doing happens before power fault handling now.

Fixes: 0e94916e6091 ("PCI: pciehp: Handle events synchronously")
Signed-off-by: Keith Busch <keith.busch@intel.com>
[bhelgaas: changelog]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
3 years agoswitchtec: Fix Spectre v1 vulnerability
Gustavo A. R. Silva [Thu, 16 Aug 2018 19:06:46 +0000 (14:06 -0500)]
switchtec: Fix Spectre v1 vulnerability

p.port can is indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.

This issue was detected with the help of Smatch:

  drivers/pci/switch/switchtec.c:912 ioctl_port_to_pff() warn: potential spectre issue 'pcfg->dsp_pff_inst_id' [r]

Fix this by sanitizing p.port before using it to index
pcfg->dsp_pff_inst_id

Notice that given that speculation windows are large, the policy is to kill
the speculation on the first load and not worry if it can be completed with
a dependent load/store [1].

[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Logan Gunthorpe <logang@deltatee.com>
Cc: stable@vger.kernel.org
3 years agoRevert "PCI: Add ACS quirk for Intel 300 series"
Mika Westerberg [Wed, 5 Sep 2018 11:09:54 +0000 (14:09 +0300)]
Revert "PCI: Add ACS quirk for Intel 300 series"

This reverts f154a718e6cc ("PCI: Add ACS quirk for Intel 300 series").

It turns out that erratum "PCH PCIe* Controller Root Port (ACSCTLR) Appear
As Read Only" has been fixed in 300 series chipsets, even though the
datasheet [1] claims otherwise.  To make ACS work properly on 300 series
root ports, revert the faulty commit.

[1] https://www.intel.com/content/dam/www/public/us/en/documents/specification-updates/300-series-c240-series-chipset-pch-spec-update.pdf

Fixes: f154a718e6cc ("PCI: Add ACS quirk for Intel 300 series")
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v4.18+
3 years agoMAINTAINERS: Add Gustavo Pimentel as DesignWare PCI maintainer
Joao Pinto [Tue, 11 Sep 2018 12:06:30 +0000 (13:06 +0100)]
MAINTAINERS: Add Gustavo Pimentel as DesignWare PCI maintainer

Currently I am managing the Synopsys drivers & tools team (full-time) and
so I am passing the pcie-designware maintenance to Gustavo.

Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
CC: Jingoo Han <jingoohan1@gmail.com>
3 years agoMAINTAINERS: Add entries for PPC64 RPA PCI hotplug drivers
Tyrel Datwyler [Thu, 6 Sep 2018 19:16:53 +0000 (14:16 -0500)]
MAINTAINERS: Add entries for PPC64 RPA PCI hotplug drivers

Add myself as maintainer of the IBM RPA hotplug modules in the
drivers/pci/hotplug directory.  These modules provide kernel interfaces for
support of Dynamic Logical Partitioning (DLPAR) of Logical and Physical IO
slots, and hotplug of physical PCI slots of a PHB on RPA-compliant ppc64
platforms (pseries).

Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
3 years agoarm64: kernel: arch_crash_save_vmcoreinfo() should depend on CONFIG_CRASH_CORE
James Morse [Mon, 10 Sep 2018 14:20:54 +0000 (15:20 +0100)]
arm64: kernel: arch_crash_save_vmcoreinfo() should depend on CONFIG_CRASH_CORE

Since commit 23c85094fe18 ("proc/kcore: add vmcoreinfo note to /proc/kcore")
the kernel has exported the vmcoreinfo PT_NOTE on /proc/kcore as well
as /proc/vmcore.

arm64 only exposes it's additional arch information via
arch_crash_save_vmcoreinfo() if built with CONFIG_KEXEC, as kdump was
previously the only user of vmcoreinfo.

Move this weak function to a separate file that is built at the same
time as its caller in kernel/crash_core.c. This ensures values like
'kimage_voffset' are always present in the vmcoreinfo PT_NOTE.

CC: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Bhupesh Sharma <bhsharma@redhat.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
3 years agoarm64: jump_label.h: use asm_volatile_goto macro instead of "asm goto"
Miguel Ojeda [Sun, 9 Sep 2018 15:47:31 +0000 (17:47 +0200)]
arm64: jump_label.h: use asm_volatile_goto macro instead of "asm goto"

All other uses of "asm goto" go through asm_volatile_goto, which avoids
a miscompile when using GCC < 4.8.2. Replace our open-coded "asm goto"
statements with the asm_volatile_goto macro to avoid issues with older
toolchains.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
3 years agoRevert "printk: make sure to print log on console."
Petr Mladek [Mon, 10 Sep 2018 13:52:06 +0000 (15:52 +0200)]
Revert "printk: make sure to print log on console."

This reverts commit 375899cddcbb26881b03cb3fbdcfd600e4e67f4a.

The visibility of early messages did not longer take into account
"quiet", "debug", and "loglevel" early parameters.

It would be possible to invalidate and recompute LOG_NOCONS flag
for the affected messages. But it would be hairy.

Instead this patch just reverts the problematic commit. We could
come up with a better solution for the original problem. For example,
we could simplify the logic and just mark messages that should always
be visible or always invisible on the console.

Also this patch reverts the related build fix commit ffaa619af1b06
("printk: Fix warning about unused suppress_message_printing").

Finally, this patch does not put back the unused LOG_NOCONS flag.

Link: http://lkml.kernel.org/r/20180910145747.emvfzv4mzlk5dfqk@pathway.suse.cz
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Maninder Singh <maninder1.s@samsung.com>
Reported-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
3 years agoMerge branch 'linux-4.19' of git://github.com/skeggsb/linux into drm-fixes
Dave Airlie [Tue, 11 Sep 2018 06:54:40 +0000 (16:54 +1000)]
Merge branch 'linux-4.19' of git://github.com/skeggsb/linux into drm-fixes

A bunch of fixes for MST/runpm problems and races, as well as fixes
for issues that prevent more recent laptops from booting.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CABDvA==GF63dy8a9j611=-0x8G6FRu7uC-ZQypsLO_hqV4OAcA@mail.gmail.com
3 years agodrm/amdgpu: move PSP init prior to IH in gpu reset
Emily Deng [Mon, 10 Sep 2018 09:51:31 +0000 (17:51 +0800)]
drm/amdgpu: move PSP init prior to IH in gpu reset

since we use PSP to program IH regs now

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amdgpu: Fix SDMA hang in prt mode v2
Tao Zhou [Fri, 7 Sep 2018 05:50:31 +0000 (13:50 +0800)]
drm/amdgpu: Fix SDMA hang in prt mode v2

Fix SDMA hang in prt mode, clear XNACK_WATERMARK in reg SDMA0_UTCL1_WATERMK to avoid the issue

Affected ASICs: VEGA10 VEGA12 RV1 RV2

v2: add reg clear for SDMA1

Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Tested-by: Yukun Li <yukun1.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amdgpu: fix amdgpu_mn_unlock() in the CS error path
Christian König [Mon, 3 Sep 2018 08:51:51 +0000 (10:51 +0200)]
drm/amdgpu: fix amdgpu_mn_unlock() in the CS error path

Avoid unlocking a lock we never locked.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agohexagon: modify ffs() and fls() to return int
Randy Dunlap [Sun, 22 Jul 2018 23:03:58 +0000 (16:03 -0700)]
hexagon: modify ffs() and fls() to return int

Building drivers/mtd/nand/raw/nandsim.c on arch/hexagon/ produces a
printk format build warning.  This is due to hexagon's ffs() being
coded as returning long instead of int.

Fix the printk format warning by changing all of hexagon's ffs() and
fls() functions to return int instead of long.  The variables that
they return are already int instead of long.  This return type
matches the return type in <asm-generic/bitops/>.

../drivers/mtd/nand/raw/nandsim.c: In function 'init_nandsim':
../drivers/mtd/nand/raw/nandsim.c:760:2: warning: format '%u' expects argument of type 'unsigned int', but argument 2 has type 'long int' [-Wformat]

There are no ffs() or fls() allmodconfig build errors after making this
change.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: linux-hexagon@vger.kernel.org
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Patch-mainline: linux-kernel @ 07/22/2018, 16:03
Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
3 years agoarch/hexagon: fix kernel/dma.c build warning
Randy Dunlap [Sat, 21 Jul 2018 03:17:35 +0000 (20:17 -0700)]
arch/hexagon: fix kernel/dma.c build warning

Fix build warning in arch/hexagon/kernel/dma.c by casting a void *
to unsigned long to match the function parameter type.

../arch/hexagon/kernel/dma.c: In function 'arch_dma_alloc':
../arch/hexagon/kernel/dma.c:51:5: warning: passing argument 2 of 'gen_pool_add' makes integer from pointer without a cast [enabled by default]
../include/linux/genalloc.h:112:19: note: expected 'long unsigned int' but argument is of type 'void *'

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: linux-sh@vger.kernel.org
Patch-mainline: linux-kernel @ 07/20/2018, 20:17
[rkuo@codeaurora.org: fixed architecture name]
Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
3 years agonetfilter: xt_hashlimit: use s->file instead of s->private
Cong Wang [Wed, 5 Sep 2018 18:41:31 +0000 (11:41 -0700)]
netfilter: xt_hashlimit: use s->file instead of s->private

After switching to the new procfs API, it is supposed to
retrieve the private pointer from PDE_DATA(file_inode(s->file)),
s->private is no longer referred.

Fixes: 1cd671827290 ("netfilter/x_tables: switch to proc_create_seq_private")
Reported-by: Sami Farin <hvtaifwkbgefbaei@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Tested-by: Sami Farin <hvtaifwkbgefbaei@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
3 years agonetfilter: nfnetlink_queue: Solve the NFQUEUE/conntrack clash for NF_REPEAT
Michal 'vorner' Vaner [Tue, 4 Sep 2018 11:25:44 +0000 (13:25 +0200)]
netfilter: nfnetlink_queue: Solve the NFQUEUE/conntrack clash for NF_REPEAT

NF_REPEAT places the packet at the beginning of the iptables chain
instead of accepting or rejecting it right away. The packet however will
reach the end of the chain and continue to the end of iptables
eventually, so it needs the same handling as NF_ACCEPT and NF_DROP.

Fixes: 368982cd7d1b ("netfilter: nfnetlink_queue: resolve clash for unconfirmed conntracks")
Signed-off-by: Michal 'vorner' Vaner <michal.vaner@avast.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
3 years agonetfilter: cttimeout: ctnl_timeout_find_get() returns incorrect pointer to type
Pablo Neira Ayuso [Mon, 3 Sep 2018 11:53:22 +0000 (13:53 +0200)]
netfilter: cttimeout: ctnl_timeout_find_get() returns incorrect pointer to type

Compiler did not catch incorrect typing in the rcu hook assignment.

 % nfct add timeout test-tcp inet tcp established 100 close 10 close_wait 10
 % iptables -I OUTPUT -t raw -p tcp -j CT --timeout test-tcp
 dmesg - xt_CT: Timeout policy `test-tcp' can only be used by L3 protocol number 25000

The CT target bails out with incorrect layer 3 protocol number.

Fixes: 6c1fd7dc489d ("netfilter: cttimeout: decouple timeout policy from nfnetlink_cttimeout object")
Reported-by: Harsha Sharma <harshasharmaiitr@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
3 years agonetfilter: conntrack: timeout interface depend on CONFIG_NF_CONNTRACK_TIMEOUT
Pablo Neira Ayuso [Fri, 31 Aug 2018 10:36:01 +0000 (12:36 +0200)]
netfilter: conntrack: timeout interface depend on CONFIG_NF_CONNTRACK_TIMEOUT

Now that cttimeout support for nft_ct is in place, these should depend
on CONFIG_NF_CONNTRACK_TIMEOUT otherwise we can crash when dumping the
policy if this option is not enabled.

[   71.600121] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
[...]
[   71.600141] CPU: 3 PID: 7612 Comm: nft Not tainted 4.18.0+ #246
[...]
[   71.600188] Call Trace:
[   71.600201]  ? nft_ct_timeout_obj_dump+0xc6/0xf0 [nft_ct]

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
3 years agonetfilter: conntrack: reset tcp maxwin on re-register
Florian Westphal [Fri, 24 Aug 2018 21:22:08 +0000 (23:22 +0200)]
netfilter: conntrack: reset tcp maxwin on re-register

Doug Smythies says:
  Sometimes it is desirable to temporarily disable, or clear,
  the iptables rule set on a computer being controlled via a
  secure shell session (SSH). While unwise on an internet facing
  computer, I also do it often on non-internet accessible computers
  while testing. Recently, this has become problematic, with the
  SSH session being dropped upon re-load of the rule set.

The problem is that when all rules are deleted, conntrack hooks get
unregistered.

In case the rules are re-added later, its possible that tcp window
has moved far enough so that all packets are considered invalid (out of
window) until entry expires (which can take forever, default
established timeout is 5 days).

Fix this by clearing maxwin of existing tcp connections on register.

v2: don't touch entries on hook removal.
v3: remove obsolete expiry check.

Reported-by: Doug Smythies <dsmythies@telus.net>
Fixes: 4d3a57f23dec59 ("netfilter: conntrack: do not enable connection tracking unless needed")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
3 years agodm thin metadata: try to avoid ever aborting transactions
Joe Thornber [Mon, 10 Sep 2018 15:50:09 +0000 (16:50 +0100)]
dm thin metadata: try to avoid ever aborting transactions

Committing a transaction can consume some metadata of it's own, we now
reserve a small amount of metadata to cover this.  Free metadata
reported by the kernel will not include this reserve.

If any of the reserve has been used after a commit we enter a new
internal state PM_OUT_OF_METADATA_SPACE.  This is reported as
PM_READ_ONLY, so no userland changes are needed.  If the metadata
device is resized the pool will move back to PM_WRITE.

These changes mean we never need to abort and rollback a transaction due
to running out of metadata space.  This is particularly important
because there have been a handful of reports of data corruption against
DM thin-provisioning that can all be attributed to the thin-pool having
ran out of metadata space.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
3 years agoMerge tag 'gvt-fixes-2018-09-10' of https://github.com/intel/gvt-linux into drm-intel...
Rodrigo Vivi [Mon, 10 Sep 2018 19:37:34 +0000 (12:37 -0700)]
Merge tag 'gvt-fixes-2018-09-10' of https://github.com/intel/gvt-linux into drm-intel-fixes

gvt-fixes-2018-09-10

- KVM mm access reference fix (Zhenyu)
- Fix child device config length for virtual opregion (Weinan)

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
From: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180910092212.GZ20737@zhen-hp.sh.intel.com
3 years agoRevert "cdc-acm: implement put_char() and flush_chars()"
Oliver Neukum [Wed, 5 Sep 2018 15:56:46 +0000 (17:56 +0200)]
Revert "cdc-acm: implement put_char() and flush_chars()"

This reverts commit a81cf9799ad7299b03a4dff020d9685f9ac5f3e0.

The patch causes a regression, which I cannot find the reason for.
So let's revert for now, as a revert hurts only performance.

Original report:
I was trying to resolve the problem with Oliver but we don't get any conclusion
for 5 months, so I am now sending this to mail list and cdc_acm authors.

I am using simple request-response protocol to obtain the boiller parameters
in constant intervals.

A simple one transaction is:
1. opening the /dev/ttyACM0
2. sending the following 10-bytes request to the device:
   unsigned char req[] = {0x02, 0xfe, 0x01, 0x05, 0x08, 0x02, 0x01, 0x69, 0xab, 0x03};
3. reading response (frame of 74 bytes length).
4. closing the descriptor
I am doing this transaction with 5 seconds intervals.

Before the bad commit everything was working correctly: I've got a requests and
a responses in a timely manner.

After the bad commit more time I am using the kernel module, more problems I have.
The graph [2] is showing the problem.

As you can see after module load all seems fine but after about 30 minutes I've got
a plenty of EAGAINs when doing read()'s and trying to read back the data.

When I rmmod and insmod the cdc_acm module again, then the situation is starting
over again: running ok shortly after load, and more time it is running, more EAGAINs
I have when calling read().

As a bonus I can see the problem on the device itself:
The device is configured as you can see here on this screen [3].
It has two transmision LEDs: TX and RX. Blink duration is set for 100ms.
This is a recording before the bad commit when all is working fine: [4]
And this is with the bad commit: [5]
As you can see the TX led is blinking wrongly long (indicating transmission?)
and I have problems doing read() calls (EAGAIN).

Reported-by: Mariusz Bialonczyk <manio@skyboo.net>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Fixes: a81cf9799ad7 ("cdc-acm: implement put_char() and flush_chars()")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agousb: Change usb_of_get_companion_dev() place to usb/common
Yoshihiro Shimoda [Mon, 20 Aug 2018 03:10:26 +0000 (12:10 +0900)]
usb: Change usb_of_get_companion_dev() place to usb/common

Since renesas_usb3 udc driver calls usb_of_get_companion_dev()
which is on usb/core/of.c, build error like below happens if we
disable CONFIG_USB because the usb/core/ needs CONFIG_USB:

ERROR: "usb_of_get_companion_dev" [drivers/usb/gadget/udc/renesas_usb3.ko] undefined!

According to the usb/gadget/Kconfig, "NOTE:  Gadget support
** DOES NOT ** depend on host-side CONFIG_USB !!".
So, to fix the issue, this patch changes the usb_of_get_companion_dev()
place from usb/core/of.c to usb/common/common.c to be called by both
host and gadget.

Reported-by: John Garry <john.garry@huawei.com>
Fixes: 39facfa01c9f ("usb: gadget: udc: renesas_usb3: Add register of usb role switch")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agousb: xhci: fix interrupt transfer error happened on MTK platforms
Chunfeng Yun [Fri, 7 Sep 2018 07:29:12 +0000 (15:29 +0800)]
usb: xhci: fix interrupt transfer error happened on MTK platforms

The MTK xHCI controller use some reserved bytes in endpoint context for
bandwidth scheduling, so need keep them in xhci_endpoint_copy();

The issue is introduced by:
commit f5249461b504 ("xhci: Clear the host side toggle manually when
endpoint is soft reset")
It resets endpoints and will drop bandwidth scheduling parameters used
by interrupt or isochronous endpoints on MTK xHCI controller.
Fixes: f5249461b504 ("xhci: Clear the host side toggle manually when
endpoint is soft reset")

Cc: stable@vger.kernel.org
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Tested-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 years agoqmi_wwan: Support dynamic config on Quectel EP06
Kristian Evensen [Sat, 8 Sep 2018 11:50:48 +0000 (13:50 +0200)]
qmi_wwan: Support dynamic config on Quectel EP06

Quectel EP06 (and EM06/EG06) supports dynamic configuration of USB
interfaces, without the device changing VID/PID or configuration number.
When the configuration is updated and interfaces are added/removed, the
interface numbers change. This means that the current code for matching
EP06 does not work.

This patch removes the current EP06 interface number match, and replaces
it with a match on class, subclass and protocol. Unfortunately, matching
on those three alone is not enough, as the diag interface exports the
same values as QMI. The other serial interfaces + adb export different
values and do not match.

The diag interface only has two endpoints, while the QMI interface has
three. I have therefore added a check for number of interfaces, and we
ignore the interface if the number of endpoints equals two.

Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
3 years agodrm/i915/bdw: Increase IPS disable timeout to 100ms
Imre Deak [Wed, 5 Sep 2018 10:00:05 +0000 (13:00 +0300)]
drm/i915/bdw: Increase IPS disable timeout to 100ms

During IPS disabling the current 42ms timeout value leads to occasional
timeouts, increase it to 100ms which seems to get rid of the problem.

References: https://bugs.freedesktop.org/show_bug.cgi?id=107494
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107562
Reported-by: Diego Viola <diego.viola@gmail.com>
Tested-by: Diego Viola <diego.viola@gmail.com>
Cc: Diego Viola <diego.viola@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180905100005.7663-1-imre.deak@intel.com
(cherry picked from commit acb3ef0ee40ea657280a4a11d9f60eb2937c0dca)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
3 years agoethernet: renesas: convert to SPDX identifiers
Kuninori Morimoto [Fri, 7 Sep 2018 02:02:45 +0000 (02:02 +0000)]
ethernet: renesas: convert to SPDX identifiers

This patch updates license to use SPDX-License-Identifier
instead of verbose license text.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>